Miniature

Circuit Breakers

RI 60

• RI 60 is used for over-current (overload and short-circuit) protection

of installations and devices, and as a disconnector in case of
electric shock
• RI 60 miniature circuit breakers are provided with two springs for
assembly to a 35 mm wide mounting rail (EN 60715). The springs
enable simple taking off irrespective of whether a busbar is
positioned below or above
• Special springs are available for fixing miniature circuit breakers with
two M5 screws
• A handle can be sealed in ON or OFF position
• Optional operation position
• Degree of protection IP20; degree of protection IP40 after
installation in a distribution box
• Additional colour indication of the position of main contacts
(red - contacts closed; green - contacts open)

Types
RI 61 single-pole
RI 61N single-pole + neutral pole
RI 61J single-pole (for DC circuits)
RI 62 two-pole
RI 62J two-pole (for DC circuits)
RI 63 three-pole
RI 63N three-pole + neutral pole
RI 64 four-pole

TECHNICAL DATA
AC DC
Standards IEC/EN 60898, IEC/EN 60947-2
Approvals VDE, GOST-R
No. of poles 1, 2, 3, 4, 1 + N, 3 + N 1. 2
Tripping characteristic (IEC/EN 60898) B, C, D, M C, M
Rated voltage Un V 230/400 -
Rated DC voltage max. 40 - 1 pole 440 - 2-pole
Un V
for t=15 ms 220 - 1-pole
Rated insulation voltage Ui V 500
Rated frequency f Hz 50/60 -
Rated current In A 0.2 to 63
Short-circuit capacity Icn kA 10 4.5
Selectivity class 3
Terminal capacity Cu 1.5 … 25
S mm2
Al 2.5 ... 25
Ambient temperature °C −25 … +55
Vibration resistance 3 g (8 - 50 Hz)

ORDERING DATA RI 61 - B - 16

Rated current In (A)

Tripping characteristic
Type
91
 Miniature Circuit Breakers

RI 60

TRIPPING CHARACTERISTIC

B, C, D (EN 60898)

In ≥ 10 A
t (s)izklopni ~as
tripping time

nazna~eni tok
rated current x In

ACCESSORIES

AUXILIARY AND SIGNAL CONTACTS

• They are used with RI 60 miniature circuit breakers and RV 60 disconnection switches (0.5 module width).
• Delivered as a single unit or with RI 60 or RV 60, respectively; mounted on the left side by means of pins and screw.
• Serve for signalling of contact position of the breaker
• Degree of protectin IP20
• Types:
- PKJ, 2PKJ − one or two auxiliary changeover contacts; position of contacts corresponds to the position of
the main contacts of the breaker
- PKJ + SKJ − one auxiliary changeover contact and one signal change over contact (fault indicating contact)
- PKJ + SKJ + TEST − test button with two functions is added: signalling the position of signal contacts and
testing of control circuit (non-stable change of position of the contacts) by slight movement of push-button
upwards and downwards without change of contact position of the breaker

TECHNICAL DATA
Standards IEC/EN 60947-5-1
Rated insulation voltage Ui V 400
Rated operational voltage Ue V 230
Rated thermal current Ith A 16
Rated operational current
AC-15 Ie A 4 (Ue = 230 V)
DC-13 0.5 (Ue = 110 V)*
Terminal capacity S mm2 0.5 ... 2.5

*Connection of two auxiliary contacts in series at 220 V

92
 Miniature Circuit Breakers

RI 60

SHUNT TRIP RELEASE VC

• Used with RI 60 miniature circuit breakers and RV 60 disconnection switches.
• Enables remote switch-off.
• Available as a single unit or together with RI 60 or RV 60; mounted on the the right side by means of pins and screw.

TECHNICAL DATA
Standards IEC/EN 60947-1
Control voltages AC 12, 24, 48, 60, 110, 230, 400
Uc V
DC 24, 48, 110
Range of control
Uc % 70 … 110
voltage
Max. tripping current AC 6 (12); 2.8 (24); 0.8 (48); 0.9 (60); 0.5 (110); 0.6 (230); 0.5 (400)
(at coil voltage) A (V)
DC 3 (24); 2 (48); 0.6 (110)
Rated frequency f Hz 50
Tripping time ms < 50
Terminal capacity S mm2 1.5 … 6

UNDERVOLTAGE RELEASE PC 60
• Used with RI 60, RI 120 miniature circuit breakers and RV 60, RV 120 disconnection switches;
• Protection of the load in the event of voltage drop (between 85% and 35% of its control voltage); uncontrolled restarting is
prevented;
• Indication of release position green/red;
• Mounted on the right side of the breaker;
• Test button for the correct function control;
• Degree of protection IP 20

TECHNICAL DATA
Standards IEC/EN 60947-1
Control voltage Uc V 24, 48, 120, 230, 400
Rated frequency f Hz 50
Coil power consumption W 3
Mechanical endurance op. c. 10,000
2
Terminal capacity S mm 0.75 … 2,5

OTHER ACCESSORIES
Busbar - universal
(for one-pole circuit breakers and one-pole circuit breakers with an auxiliary switch)
Designation Length (m) Cross-section (mm2)
G-1L-210 / 12 iso 0.21 12
G-1L-1000 / 12 iso 1 12
G-2L-1000 / 10 1 12

Busbar - fork-type, 3-phase

(for three-pole circuit breakers and one-pole circuit breakers in three-phase circuits)
Designation Length (m) Cross-section (mm2)
G-3L-1000 / 10 C 1 10
G-3L-1000 / 16 C 1 16
G-4L-1000 / 16 1 16

93
 Miniature Circuit Breakers

RI 60

End caps (for three-phase busbars)

Designation Cross-section (mm2)

EK-C-3/10 10
EK-C-2+3/16 16

CONNECTION DIAGRAM
AC DC AUXILIARY CONTACTS
1-pole + N 2-pole 3-pole
PKJ 2PKJ, PKJ + SKJ

1-pole 2-pole
12 14 1 96 98 12 14 1

3-pole + N 4-pole

11 2 95 11 2

DIMENSIONS

RI 60, RV 60

PC 60
59
59
17.5
43
84

45

94