Scribd
Upload
174 views1 page

CS2:2012 Steel Reinforcement Amendments

This document summarizes amendments made to the Construction Standard CS2:2012 regarding steel reinforcing bars for reinforced concrete. The amendments include replacing terminology for consistency, adding a requirement that on-site test specimens be at least 1 meter long, replacing the title and text of section 6.1 for clarity, and correcting a figure reference. The amendments were approved on July 21, 2016 by the Standing Committee on Concrete Technology of the Development Bureau of the Hong Kong government.

Uploaded by

Anonymous 37PvyXC
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
174 views1 page

CS2:2012 Steel Reinforcement Amendments

This document summarizes amendments made to the Construction Standard CS2:2012 regarding steel reinforcing bars for reinforced concrete. The amendments include replacing terminology for consistency, adding a requirement that on-site test specimens be at least 1 meter long, replacing the title and text of section 6.1 for clarity, and correcting a figure reference. The amendments were approved on July 21, 2016 by the Standing Committee on Concrete Technology of the Development Bureau of the Hong Kong government.

Uploaded by

Anonymous 37PvyXC
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

CS2:2012

Amendment No. 1/2016


July 2016

Construction Standard CS2:2012


Steel Reinforcing Bars for the Reinforcement of Concrete

The following amendments are made to CS[Link]

1. CONTENTS, replace “6.1 Conditions of test specimen” with “6.1 Conditions of testing”.

2. Sub-section 5.1.1, add the following sentence

“The length of the test specimen taken on site for the tensile test shall be at least 1
metre.”

3. Section 6.1, replace the title "CONDITIONS OF TEST SPECIMENS" with

"CONDITIONS OF TESTING".

4. Sub-section 6.1, replace the last sentence with

"The test specimen for tensile test shall be either at least 600 mm long or 20 times the
nominal size, whichever is the greater."

5. Sub-section [Link], Paragraph (g),

Replace “Figure 12” with “Figure 14”.

The Standing Committee on Concrete Technology


Development Bureau
The Government of the Hong Kong Special Administrative Region
21 July 2016

CS2:2012 Amd No. 1/2016 Page 1 of 1

You might also like