Scribd
Upload
247 views3 pages

M3200 Pressure Relief Valve Guide

The M3200 valve is a pressure sustaining/relief valve that maintains a constant upstream pressure. It can be installed to sustain pressure between two zones or relieve excess pressure from a source. The valve diverts excess flow to atmosphere, storage, or back to a pump intake. Additional features include solenoid control, check functions, reverse flow, low pressure shutoff, dual pressure settings, flow control, and level control.

Uploaded by

Mirhad Pjanić
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
247 views3 pages

M3200 Pressure Relief Valve Guide

The M3200 valve is a pressure sustaining/relief valve that maintains a constant upstream pressure. It can be installed to sustain pressure between two zones or relieve excess pressure from a source. The valve diverts excess flow to atmosphere, storage, or back to a pump intake. Additional features include solenoid control, check functions, reverse flow, low pressure shutoff, dual pressure settings, flow control, and level control.

Uploaded by

Mirhad Pjanić
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

ST M3200 ENG STA R2 03/17

M3200: PRESSURE SUSTAINING / RELIEF VALVE

OPERATING PRINCIPLE

Pressure sustaining/relief control valves maintain a constant upstream pressure (valve inlet) by relieving ex-
cess pressure.
SUSTAINING APPLICATION - The valve is installed on a distribution line between two pressure zones. If de-
mand on the lower zone causes a drop in upper zone pressure, the pressure is sustained at a preset mini-
mum. When this occurs the pressure available to the downstream zone is reduced.
RELIEF APPLICATION - The valve is installed to relieve excess pressure from a source. In a typical installa-
tion the valve diverts excess flow/pressure to atmosphere, a storage tank, or back to a pump intake.

ADDITIONAL FEATURES AVAILABLE:


 solenoid on-off control function - a remote controller switches the valve on-off;
 check function - if outlet pressure rises higher than inlet pressure, backflow is prevented;
 reverse flow - the main valve opens fully if outlet pressure is higher than inlet pressure;
 low pressure shut-off with manual reset;
 two adjustable pressure outlet values - switching can be by manual override, or remote electrical sole-
noid control;
 flow rate control;
 on-off float device level control;
 constant level float control valve;
 booster pump control valve with check.

WE RESERVE THE RIGHT TO MAKE TECHNICAL CHANGES. 1/3


ST M3200 ENG STA R2 03/17

M3200 CIRCUIT LAYOUT

9
4 7

2b 2a
8 6

ITEM DESCRIPTION MATERIAL


1 Main valve GJS400-15 EN1563

2 (a,b) Isolating ball valve Ni-plated Brass

3 Y - Strainer with calibrated orifice 1.4401 EN10088-3 + Brass

4 Monodirectional needle valve 1.4401 EN10088-3 + Brass

5 Pressure relief / sustaining pilot CM200 1.4401 EN10088-3 + Brass

6 Isolating ball valve Ni-plated Brass

7 Position indicator with manual venting cock Brass + Hardened glass

8 Gauge holder with drainage Ni-plated Brass

9 Pressure gauge 1.4301 EN10088-3 + Glycerine

-- Pipe 1.4401 EN10088-3

-- Fittings 1.4401 EN10088-3

-- Pressure unions 1.4401 EN10088-3 + Brass

WE RESERVE THE RIGHT TO MAKE TECHNICAL CHANGES. 2/3


ST M3200 ENG STA R2 03/17

Pressure relief valve to protect


upstream hydraulic network.

Pressure sustaining valve suit-


able for maintaining a minimum
pressure for a critical user.

Critical user

WE RESERVE THE RIGHT TO MAKE TECHNICAL CHANGES. 3/3

You might also like