Scribd
Upload
401 views2 pages

Diesel Engines 4CT90 & 4CTi90 Specs

The 4CT90 and 4CTi90 are 4-cylinder diesel engines manufactured by ANDORIA-MOT Sp. z o.o. for light duty vehicles. The 4CT90 comes in two versions: one rated at 66 kW meeting Euro 2 standards, and one rated at 75 kW meeting Euro 3 standards. Both have a displacement of 2.4L and operate at 4100 rpm. The 4CTi90 is rated at 75 kW, has a Bosch distributor-type injection pump, and meets Euro 3 standards without electronic control.

Uploaded by

Florin Flavius
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
401 views2 pages

Diesel Engines 4CT90 & 4CTi90 Specs

The 4CT90 and 4CTi90 are 4-cylinder diesel engines manufactured by ANDORIA-MOT Sp. z o.o. for light duty vehicles. The 4CT90 comes in two versions: one rated at 66 kW meeting Euro 2 standards, and one rated at 75 kW meeting Euro 3 standards. Both have a displacement of 2.4L and operate at 4100 rpm. The 4CTi90 is rated at 75 kW, has a Bosch distributor-type injection pump, and meets Euro 3 standards without electronic control.

Uploaded by

Florin Flavius
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

FAMILY ENGINES 4CT90 AND 4CTi90

4CT90 Engine - our own design , 4-cylinder, 2.4 l engine with turbocharger,
manufactured in the two following versions:
- Rated power of 66 kW at 4100 rpm, peak torque of 195 Nm at 2500 rpm,
with in-line injection pump of MOTORPAL, that meets EURO 2 emission
standards.
- Rated power of 75 kW at 4100 rpm, peak torque of 230 Nm at 2500 rpm,
with distributor - type injection pump of BOSCH and charged air cooler
(intercooler), that meets EURO 3 emission standards (without electronic
control).

The Engines are use in the Light Duty vehicles:


- Lublin,
- Gazelle,
- UAZ,
- HONKER.

ANDORIA-MOT Sp. z o. o.
34-120 Andrychów ul. Krakowska 140
tel. +48 33 8762682, +48 33 8762728
fax +48 33 8753560
e-mail: [email protected]
www.andoria-mot.com.pl
TECHNICAL DATAS OF ANDORIA DIESEL ENGINES 4CT90, 4CTi90

Parameters 4CT90-1MEA 4CTi90-1BEA


No. of cylinders 4, diesel, 4 stroke, in line
Bore diameter (mm) 90
Piston stroke (mm) 95
Displacement (cm3) 2417
Compression ratio 20.6
Rated power (kW/HP) 66/90 75/102
Rated speed (rpm) 4100
Peak torque (Nm) 195 230
Peak torque speed (rpm) 2500 2000 - 2500
Minimum idle speed (rpm) 800
Spec. fuel cons. at rated power (g/kWh) 5% 260 255
Oil cons. referred to rated power (g/kWh) 4.1
Lubrication Pressure and splash
Engine oil Grade CD/CE/CF SAE 10W40
Lubrication oil capacity (l) ~7
Injection pump MOTORPAL in-line BOSCH distribution
Fuel delivery Diaphragm feed pump -
Fuel injection indir., Ricardo Comet VB swirl chamber
Cooling Liquid forced cooled
Cooling system capacity (l) 6.8
Power take-off from flywheel
Timing advancer Automatic centrifugal
Dry weight (kg) 232

ANDORIA-MOT Sp. z o. o.
34-120 Andrychów ul. Krakowska 140
tel. +48 33 8762682, +48 33 8762728
fax +48 33 8753560
e-mail: [email protected]
www.andoria-mot.com.pl

You might also like