Scribd
Upload
130 views1 page

Bidi Flowtable With FT 1505 XLG 1955

The document analyzes a conveyor chain application including details like chain type, length, speed, product weight, and calculations for tension, horsepower requirements, shaft diameters. It provides conclusions on minimum shaft sizes and notes on additional considerations for drive type and power train efficiency losses.

Uploaded by

ozmen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
130 views1 page

Bidi Flowtable With FT 1505 XLG 1955

The document analyzes a conveyor chain application including details like chain type, length, speed, product weight, and calculations for tension, horsepower requirements, shaft diameters. It provides conclusions on minimum shaft sizes and notes on additional considerations for drive type and power train efficiency losses.

Uploaded by

ozmen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Rexnord FlatTop North America Rexnord FlatTop Europe b.v.

1272 Dakota Drive, Grafton, WI 53024 Einsteinstraat 1, 2691 GV 's-Gravenzande, The Netherlands
P 262-376-4800 F 262-376-4750 P 31-174-445-111 F 31-174-445-222
Rexnord® MatTop® Conveyor Chain Analysis
1/13/2012 1:50:19 PM

Application Type Straight Running


Drive Style Uni or Bi-Directional, Bottom Drive
Chain FT 1505 METRIC 1955 XLG
Total Length of Chain Required per strand 8[m]
Number of Strands 1
Chain Weight 6.35 [ kg/m² ]
Carry Wearstrip Friction Factor 0.2
Return Wearstrip Friction Factor 0.2
Chain Speed 10 [ MPM ]
Product Weight 30 [ kg/m² ]
Product Friction Factor 0.2
Accumulation 100 [ % ]
Number of Starts Per Hour N/A
Gearbox Efficiency 100 [ % ]
Sprocket Series NS1500-24T
Pitch Diameter 114.9 [ mm ]
Number of Drive Sprockets Required per shaft 2
Number of Idler Sprockets Required per shaft 2

Section Label Type Product Weight [ kg/m² ] Length [ m ] Accum. Length [ m ] Height Change [ m ] Direction
1 Straight 30 3 3 0

Speed to Length Ratio 3.33


Total Design Horse Power 0.14 [ kW ]
RPM 27.72 [ RPM ]
Torque 49 [ N m ]
Final Calculated Tension 431.50 [ N/m ]
Maximum Allowable Chain Tension 6323.92 [ N/m ]
Percent of Allowable Chain Tension 6.82 [ % ]

Minimum Shaft Diameters (based on bearing spacing 2099.6 [ mm ])


Drive Drive Idler Idler Terminal Terminal
#
Shaft Shaft Shaft Shaft Shaft Shaft
of
Round Square Round Square Round Square
Bearings
[ mm ] [ mm ] [ mm ] [ mm ] [ mm ] [ mm ]
2 42.93 37.59 47.5 41.66 51.05 44.7
3 20.57 17.27 23.62 19.81 25.91 21.84

Contact Rexnord FlatTop Application Engineering if you require assistance in selecting a chain for this application. The
horsepower (HP) output requirement the program calculates is the "design horsepower" that is required to power the conveyor
based on the input parameters. Additional considerations should be made for the type of drive used, efficiency losses in the
power train, as well as any gearbox manufacturer's recommendations. MTO chains will require a minimum order quantity,
longer lead time, and a set up charge. When using pushers the chain is derated

Shafting Calculations are based on: Deflection: 0.125 in. or 3.175 mm Torsion: 6,000 psi Bending: 10,000 psi

© 2008 Rexnord Industries, LLC All Rights Reserved.

You might also like