Wireless receivers with relay outputs
RF Rx SW915-4S 24VDC
Material number: 1370677
Features/Options:
• sWave® wireless technology • Transmitter/receiver assignment by teaching mode
• 4 potential-free relay outputs • LEDs for indication of switching state
• 4 NO contacts, max. 3 A • SMA reverse plug-in connector for external antenna
Dimensions Technical data
Applied standards EN 60947-5-1;
EN 61000-6-2, -6-3, -4-2, -4-20,
EN 61000-4-4, -4-5, -4-6;
EN 60068-2-6, EN 60068-2-27;
EN 301 489-1; EN 301 489-3;
69.5 22.6 EN 300 220-1; EN 300 220-2
Number of channels 4
Mounting DIN rail mounting
Connection screw terminals 0.14 mm² - 2,5
mm², stripping length 8 mm
Degree of protection IP 20 to IEC/EN 60529
Inputs 4 wireless channels, max. 40
transmitters
Outputs 4 NO contacts (relay)
Rated operating current Ie 24 VDC: max. 0.1 A
Rated operating voltage Ue 24 VDC -15 % … +10 %
Ie/Ue of output contacts 3 A / 250 VAC; 3 A / 24 VDC
Utilisation category AC-15; DC-13
Rated operating isolation 250 VAC
voltage Ui
Rated impulse withstand 2.5 kV
voltage Uimp
Frequency 915 MHz (USA, Canada and
Mexico)
Channel bandwidth 550 kHz
Display green LED: operating state,
orange LED: switching conditions
Operation cycles approx. 12000 telegrams with
repetitions/h
Degree of pollution 2
Ambient temperature 0 °C … +55 °C
Storage and shipping –25 °C … +85 °C
temperature
Errors and omissions excepted.
Printed: Page steute Technologies Brückenstraße 91 Telefon +49 (0) 5731 745-0
[email protected]18.03.2019 1/2 GmbH & Co. KG 32584 Löhne, Deutschland Telefax +49 (0) 5731 745-200 www.steute.com
Wireless receivers with relay outputs
RF Rx SW915-4S 24VDC
Material number: 1370677
Technical data
External antenna always required for optimum
wireless range
Note Inductive loads (contactors, relays
etc.) are to be suppressed by
suitable circuitry. Switching
contacts are not suitable for
capacitive loads.
Approvals USA: FCC - XK5-RFRXSW915;
Canada: IC - 5158A-
RFRXSW915;
Mexico: IFT - RCPSTRF17-1886
d
Arrangement of receiver and switch antenna
Optimum Possible Unsuitable
mounting mounting mounting
Note
Magnetic base antennae must be mounted on a
metal plate of min. 250 x 250 mm size.
Errors and omissions excepted.
Printed: Page steute Technologies Brückenstraße 91 Telefon +49 (0) 5731 745-0
[email protected]18.03.2019 2/2 GmbH & Co. KG 32584 Löhne, Deutschland Telefax +49 (0) 5731 745-200 www.steute.com
