Methods for Handling Deadlocks
Ensure that the system will never enter a deadlock state.
Allow the system to enter a deadlock state and then recover.
Ignore the problem and pretend that deadlocks never occur in the
system; used by most operating systems, including UNIX.
Deadlock Prevention
Mutual Exclusion – not required for sharable resources; must hold for
non-sharable resources.
Hold and Wait – must guarantee that whenever a process requests a
resource, it does not hold any other resources.
Require process to request and be allocated all its sources before it
begins execution, or allow process to request resources only when the
process has none.Low resource utilization; starvation possible. Restrain
the ways request can be made.
No Preemption – If a process that is holding some resources
requests another resource that cannot be immediately allocated to it, then
all resources currently being held are released.
Preempted resources are added to the list of resources for which the
process is waiting.
Process will be restarted only when it can regain its old resources, as well
as the new ones that it is requesting.
Circular Wait – impose a total ordering of all resource types, and
require that each process requests resources in an increasing order of
enumeration
Deadlock Avoidance
Simplest and most useful model requires that each process declare
the maximum number of resources of each type that it may need.
The deadlock-avoidance algorithm dynamically examines the resource-
allocation state to ensure that there can never be a circular-wait condition.
Resource-allocation state is defined by the number of available and
allocated resources, and the maximum demands of the processes.
Requires that the system has some additional a
priori information available.
Safe State
When a process requests an available resource, system must decide if
immediate allocation leaves the system in a safe state.
System is in safe state if there exists a safe sequence of all processes.
Sequence <P1, P2, …, Pn> is safe if for each Pi, the resources that Pi can
still request can be satisfied by currently available resources + resources
held by all thePj, with j<I.
✑✎If Pi resource needs are not immediately available, then Pi can wait
until all Pj have finished.
✒✎When Pj is finished, Pi can obtain needed resources, execute, return
allocated resources, and
terminate.
✓✎ When Pi terminates, Pi+1 can obtain its needed resources, and
so on.
Basic Facts
If a system is in safe state _ no deadlocks.
If a system is in unsafe state _ possibility of deadlock.
Avoidance _ ensure that a system will never enter an unsafe state.
Safe, Unsafe , Deadlock State
Resource-Allocation Graph Algorithm
Claim edge Pi → Rj indicated that process Pj may request resource Rj;
represented by a dashed
line.
Claim edge converts to request edge when a process requests a resource.
When a resource is released by a process, assignment edge reconverts to
a claim edge.
Resources must be claimed a priori in the system.
Resource-Allocation Graph For Deadlock Avoidance
Unsafe State In Resource-Allocation Graph
Banker’s Algorithm
Multiple instances.
Each process must a priori claim maximum use.
When a process requests a resource it may have to wait.
When a process gets all its resources it must return them in a finite amount
of time.
Data Structures for the Banker’s Algorithm
Available: Vector of length m. If available [j] = k, there are k instances of
resource type Rj available.
Max: n x m matrix. If Max [i,j] = k, then process Pi may request at
most k instances of resource type Rj.
Allocation: n x m matrix. If Allocation [i,j] = k then Pi is currently
allocated k instances of Rj.
Need: n x m matrix. If Need [i,j] = k, then Pi may need k more instances
of Rj to complete its task.
Need [i,j] = Max [i,j] – Allocation [i,j].
Let n = number of processes, and m = number of resources types.
Safety Algorithm
1. Let Work and Finish be vectors of length m and n, respectively.
Initialize:
Work = Available
Finish [i] = false for i - 1,3, …, n.
2. Find and i such that both:
(a) Finish [i] = false
(b) Needi ≤ Work
If no such i exists, go to step 4.
3. Work = Work + Allocation i
Finish [i] = true
go to step 2.
4. If Finish [i] == true for all i, then the system is in a safe state.
Resource-Request Algorithm for Process Pi
Request = request vector for process Pi. If Request i [j] = k
then process Pi wants k instances of resource type Rj.
1. If Request i ≤ Need i go to step 2. Otherwise, raise error condition,
since process has
exceeded its maximum claim.
2. If Request i ≤ Available, go to step 3. Otherwise Pi must wait,
since resources are not available.
3. Pretend to allocate requested resources to Pi by modifying the state
as follows:
Available = Available = Request i;
Allocation i = Allocation i + Request i;
Need i = Need i – Request i;;
• If safe _ the resources are allocated to Pi.
• If unsafe _ Pi must wait, and the old resource-
allocation state is restored
Example of Banker’s Algorithm
5 processes P0 through P4; 3 resource types A (10 instances),
B (5instances, and C (7 instances).
Snapshot at time T0: Allocation Max Availabl
ABCABCABC
P0 0 1 0 7 5 3 3 3 2
P1 2 0 0 3 2 2
P2 3 0 2 9 0 2
P3 2 1 1 2 2 2
P4 0 0 2 4 3 3
The content of the matrix. Need is defined to be Max – Allocation.
Need
ABC
P0 7 4 3
P1 1 2 2
P2 6 0 0
P3 0 1 1
P4 4 3 1
The system is in a safe state since the sequence < P1, P3, P4, P2, P0>
satisfies safety criteria.
Check that Request ≤ Available (that is, (1,0,2) ≤ (3,3,2) _ true.
Allocation Need Available
ABCABCABC
P0 0 1 0 7 4 3 2 3 0
P1 3 0 2 0 2 0
P2 3 0 1 6 0 0
P3 2 1 1 0 1 1
P4 0 0 2 4 3 1
Executing safety algorithm shows that sequence <P1, P3, P4, P0, P2>
satisfies safety requirement.
Can request for (3,3,0) by P4 be granted?
Can request for (0,2,0) by P0 be granted?
Deadlock Detection
Allow system to enter deadlock state
Detection algorithm
Recovery scheme
Single Instance of Each Resource Type
Maintain wait-for graph
Nodes are processes.
Pi → Pj if Pi is waiting for Pj.
Periodically invoke an algorithm that searches for a cycle in the graph.
An algorithm to detect a cycle in a graph requires an order of n2
operations, where n is the number of vertices in the graph.
Resource-Allocation Graph and Wait-for Graph
Resource-Allocation Graph Corresponding wait-for graph
Several Instances of a Resource Type
Available: A vector of length m indicates the number of available
resources of each type.
Allocation: An n x m matrix defines the number of resources of each
type currently allocated
to each process.
Request: An n x m matrix indicates the current request of each process.
If Request [ij] = k,
then process Pi is requesting k more instances of resource
type. Rj.
Detection Algorithm
1. Let Work and Finish be vectors of length m and n, respectively
Initialize:
(a) Work = Available
(b) For i = 1,2, …, n, if Allocation i ≠ 0, then
Finish [i] = false; otherwise, Finish [i] = true.
2. Find an index i such that both:
(a) Finish [i] == false
(b) Request i ≤ Work
If no such i exists, go to step 4.
3. Work = Work + Allocation i
Finish [i] = true
go to step 2.
4. If Finish [i] == false, for some i, 1 ≤ i ≤ n, then the system is in deadlock
state.
Moreover, if Finish [i] == false, then Pi is deadlocked.
Algorithm requires an order of O (m x n2) operations to detect whether the
system is in deadlocked state.
Example of Detection Algorithm
Five processes P0 through P4; three resource types
A (7 instances), B (2 instances), and C (6 instances).
Snapshot at time T0:
Allocation Request Available
ABCABCABC
P0 0 1 0 0 0 0 0 0 0
P1 2 0 0 2 0 2
P2 3 0 3 0 0 0
P3 2 1 1 1 0 0
P4 0 0 2 0 0 2
Sequence <P0, P2, P3, P1, P4> will result in Finish [i] = true for all i.
P2 requests an additional instance of type C.
Request
A B C
P0 0 0 0
P1 2 0 1
P2 0 0 1
P3 1 0 0
P4 0 0 2
State of system?
Can reclaim resources held by process P0, but insufficient resources to
fulfill other processes; requests.
Deadlock exists, consisting of processes P1, P2, P3, and P4.
Detection-Algorithm Usage
When, and how often, to invoke depends on:
✑✎ How often a deadlock is likely to occur?
✒✎ How many processes will need to be rolled back?
✓✎ one for each disjoint cycle
if detection algorithm is invoked arbitrarily, there may be many cycles in
the resource graph
and so we would not be able to tell which of the many deadlocked
processes “caused” the deadlock.
