Batangas State University

EE 517 Power System Analysis and Design

Laboratory Exercise No. 1

Transmission Line Parameters
First Author1, Second Author2, Third Author3
1AuthorUniversity, School of Business and Economics,
Address of 1st author, Country, PH-001 657 567 5676
[email protected]
2Author School of Computer Science and Engineering, University,
Address of 2nd author, Country, PH-001 657 567 5676
[email protected]
3Author University, Department of Management,
Address of 3rd author, Country, PH-001 657 567 5676
[email protected]

Abstract: These instructions provide you guidelines for preparing papers for International Journal of Advanced Research and
Publications (IJARP). Use this document as a template and as an instruction set. Please submit your manuscript by IJARP Online
Submission Tool.

Keywords: Use about four keywords or phrases in alphabetical order, separated by commas. Keywords should closely reflect the topic and
should optimally characterize the paper.

1. Introduction body paragraphs (except the beginning of a section/sub-

When you submit your paper print it in two-column format, section) should have the first line indented about 3.6 mm
including figures and tables [1]. In addition, designate one (0.14").
author as the “corresponding author”. This is the author to
whom proofs of the paper will be sent. Proofs are sent to the 3.3 Figures and Tables
corresponding author only [2]. Place illustrations (figures, tables, drawings, and
photographs) throughout the paper at the places where they
2. Page Size and Layout are first discussed in the text, rather than at the end of the
Set your page as A4, width 210, height 297 and margins as paper. Number illustrations sequentially (but number tables
follows [3]: separately). Place the illustration numbers and caption under
the illustration in 10 pt font. Do not allow illustrations to
extend into the margins or the gap between columns (except
 Left Margin 17.8 mm (0.67")
2-column illustrations may cross the gap). If your figure has
 Right Margin 14.3 mm (0.56)
two parts, include the labels “(a)” and “(b)”.
 Top Margin – 17.8 mm (0.7")
 Bottom Margin – 17.8 mm (0.7")

You should use Times Roman of size 10 for all fonts in the
paper. Format the page as two columns:

 Column Width 86.8 mm (3.42")

 Column Height – 271.4 mm (10.69")
 Space/Gap between Columns - 5.0 mm (0.2"). Figure 1: Testing data- load current (amperes)

3. Title, Authors, Body Paragraphs, Sections 3.4 Tables

Headings and References Place table titles above the tables.

3.1 Title and authors Table 1: Margin specifications

The title of the paper is centered 17.8 mm (0.67") below the Margin A4 Paper US Letter Paper
top of the page in 24 point font. Right below the title
Left 18.5 mm 14.5 mm (0.58 in)
(separated by single line spacing) are the names of the
authors. The font size for the authors is 11pt. Author Right 18mm 13 mm (0.51 in)
affiliations shall be in 9 pt.

3.5 Sections headings

Section headings come in several varieties:
3.2 Body paragraphs 1. first level headings: 1. Heading 1
The main text for your paragraphs should be 10pt font. All 2. second level: 1.2. Heading 2

Laboratory Exercise No. 1, January 2019 1

 Batangas State University
EE 517 Power System Analysis and Design

3. third level: 1.2.3 Heading 3 http://nl1.vnunet.com/news/1116995. [Accessed: Sept.

4. forth level: (a) Heading 4 12, 2004]. (General Internet site)
5. fifth level: (1) Heading 5
[7] R.J. Vidmar, “On the Use of Atmospheric Plasmas as
3.6 References Electromagnetic Reflectors,” IEEE Trans. Plasma
Number citations consecutively in square brackets [1]. The Science, vol. 21, no. 3, pp. 876-880, available at
sentence punctuation follows the brackets [2]. Multiple http://www.halcyon.com/pub/journals/21ps03-vidmar,
references [2], [3] are each numbered with separate brackets Aug. 1992. (URL for Transaction, journal, or
[1]–[3]. Please note that the references at the end of this magzine)
document are in the preferred referencing style. Please
ensure that the provided references are complete with all the [8] L. Hubert and P. Arabie, “Comparing Partitions,” J.
details and also cited inside the manuscript (example: page Classification, vol. 2, no. 4, pp. 193-218, Apr. 1985.
numbers, year of publication, publisher’s name etc.). (Journal or magazine citation)

4. Equations [9] H. Poor, “A Hypertext History of Multiuser

If you are using Word, use either the Microsoft Equation Dimensions,” MUD History,
Editor or the MathType add-on (http://www.mathtype.com) http://www.ccs.neu.edu/home/pb/mud-history.html.
for equations in your paper (Insert | Object | Create New | 1986. (URL link *include year)
Microsoft Equation or MathType Equation). “Float over
text” should not be selected. Number equations [10] H. Goto, Y. Hasegawa, and M. Tanaka, “Efficient
consecutively with equation numbers in parentheses flush Scheduling Focusing on the Duality of MPL
with the right margin, as in (1). First use the equation editor Representation,” Proc. IEEE Symp. Computational
to create the equation. Then select the “Equation” markup Intelligence in Scheduling (SCIS ’07), pp. 57-64, Apr.
style. Press the tab key and write the equation number in 2007, doi:10.1109/SCIS.2007.367670. (Conference
parentheses. proceedings)

P K Author Profile
E    ( opk )2 (1)
p 1 k 1
<Author 1 Photo>
Author 1 received the B.S. and M.S. degrees in Electrical
5. Other recommendations Engineering from Shibaura Institute of Technology in 1997 and
Equalize the length of your columns on the last page. If you 1999, respectively. During 1997-1999, he stayed in
are using Word, proceed as follows: Communications Research Laboratory (CRL), Ministry of Posts
and Telecommunications of Japan to study digital beam forming
Insert/Break/Continuous.
antennas, mobile satellite communication systems, and wireless
access network using stratospheric platforms. He now with DDI
References Tokyo Pocket Telephone, Inc.
[1] A. Bonnaccorsi, “On the Relationship between Firm
Size and Export Intensity,” Journal of International
Business Studies, XXIII (4), pp. 605-635, 1992.
(journal style)

[2] R. Caves, Multinational Enterprise and Economic

Analysis, Cambridge University Press, Cambridge,
1982. (book style)

[3] M. Clerc, “The Swarm and the Queen: Towards a

Deterministic and Adaptive Particle Swarm
Optimization,” In Proceedings of the IEEE Congress on
Evolutionary Computation (CEC), pp. 1951-1957,
1999. (conference style)

[4] H.H. Crokell, “Specialization and International

Competitiveness,” in Managing the Multinational
Subsidiary, H. Etemad and L. S, Sulude (eds.), Croom-
Helm, London, 1986. (book chapter style)

[5] K. Deb, S. Agrawal, A. Pratab, T. Meyarivan, “A Fast

Elitist Non-dominated Sorting Genetic Algorithms for
Multiobjective Optimization: NSGA II,” KanGAL
report 200001, Indian Institute of Technology, Kanpur,
India, 2000. (technical report style)

[6] J. Geralds, "Sega Ends Production of Dreamcast,"

vnunet.com, para. 2, Jan. 31, 2001. [Online]. Available:

Laboratory Exercise No. 1, January 2019 2