Scribd
Upload
551 views2 pages

15 Checklist For Structural Steel Works

The document is a checklist for a steel works project. It contains 9 items to inspect including using specified materials, providing structural openings and anchorage as per approved drawings, and proper joining, finishing, sealing, and coating of steel work. The checklist is to be signed by the contractor, project engineer, and project manager after verifying each item as satisfactory, not satisfactory, or not applicable with remarks.

Uploaded by

sandip
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
551 views2 pages

15 Checklist For Structural Steel Works

The document is a checklist for a steel works project. It contains 9 items to inspect including using specified materials, providing structural openings and anchorage as per approved drawings, and proper joining, finishing, sealing, and coating of steel work. The checklist is to be signed by the contractor, project engineer, and project manager after verifying each item as satisfactory, not satisfactory, or not applicable with remarks.

Uploaded by

sandip
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

[Type here] [Type here]

Check List on Steel Works

Project :_____________ Location : ___________ Date: ______________

S. No. Description S NS N.A Remarks


1 Use Specified Materials
a) Grade of Steel
b) Surface Treatment
c) Size of Steel Members
d) Square ness At Right Angles
e) Defect Free
2 Provide Structural Openings With
Allowance As Per Approved Shop
Drawing
3 Provide Anchorage As Per Shop :
Drawing
4 Joining Method Specified :
a) Welding
 Type of Electrode :
 Weld Size
 Slag / Inclusion Free
Qualified Welders
b) Bolting
Bolt Size and Type
Holes Drilled And Cut
Thread Through Nut
Tighten With Wrench :
5 Finish Steel Work With
a) Layout According To Drawing
b) Plumb / Levels / Lines Within
Tolerance
c) Join Material And details
d) Defect Free
e) Touch Up Priming
6 Grout Base Frames or Cast in
Frames
[Type here] [Type here]

S. No. Description S NS N.A Remarks


7 Seal Gaps At Frame / Wall
8 Fire Rated Doors Inspected
9 Provide Coating
a) Paint
b) Fire Rated

Contractor Project Engineer Project Manager

(Name & Signature) (Name & Signature) (Name & Signature)

Note: S - Satisfactory
NS - Not Satisfactory
N.A - Not Applicable

You might also like