TX6000™ Category 6 Copper Cable – UTP

S P E C I F I CAT I O N S H E E T

specifications
TX6000 ™ UTP
Category 6 U/UTP cable shall exceed ANSI/TIA-568-C.2 Copper Cabling System
and IEC 61156-5 Category 6 component standards.
The conductors shall be 23 AWG copper insulated with
HDPE. The copper conductors shall be twisted in pairs,
separated by a cross-divider and covered by a low TX6000 ™ UTP Copper Cable
smoke zero halogen (LSZH) jacket. LSZH: PUZ6004*
Mini-Com ® TX6 ™
PLUS UTP Jack Module

technical information Jack module: CJ688TGIW**

Electrical Certified channel performance in a 4-connector configuration up to TX6 PLUS

™

performance: 100 meters and exceeds the requirements of ISO 11801 Class E UTP Patch Cords – LSZH
and ANSI/TIA-568-C.2 Category 6 standards at swept frequencies
up to 250 MHz Meter lengths: UTPSPL^MY
Certified component performance up to 100 meters and exceeds the DP6 ™ PLUS
component requirement of the IEC 61156-5 and ANSI/TIA-568-C.2
Category 6 component standards at swept frequencies up to 250 MHz Angled Punchdown Patch Panels
Conductors/ 23 AWG solid copper insulated with HDPE 24-port, 1 RU: DPA24688TGY
insulators: 48-port, 2 RU: DPA48688TGY
Flame rating: LSZH – IEC 60332-3-25 (-3d), IEC 60754-1 and -2, IEC 61034-2, DP6 ™ PLUS
NBN C 30-004 (F2)
EN50575: Euroclass Dca – s1a, d2, a1 Flat Punchdown Patch Panels
PoE compliance: Meets IEEE 802.3af and IEEE 802.3at for PoE applications 12-port, 1 RU: DP12688TGY
24-port, 1 RU: DP24688TGY
Installation 110 N (25 lbf ) maximum 48-port, 2 RU: DP48688TGY
tension:
Mini-Com ® Angled Flush Mount
Temperature 0°C to 50°C (32°F to 122°F) during installation Modular Patch Panels
rating: -20°C to 75°C (-4°F to 167°F) during operation
24-port, 1 RU: CPPA24FMWBLY
Cable jacket: LSZH – Low Smoke Zero Halogen 48-port, 2 RU: CPPA48FMWBLY
Cable diameter: 6.2mm (0.244 in.) nominal Mini-Com ® Flat Flush Mount
Cable weight: 13 kg/305m (29 lbs./1000 ft.)
Modular Patch Panels
24-port, 1 RU: CPP24FMWBLY
Packaging: Packaged 305 meters (1000 feet) or 500 meters (1640 feet) on a reel 48-port, 2 RU: CPP48FMWBLY
Package tested to ISTA Procedure 1A
Termination and Cable Prep Tools
Termination
key features and benefits tools: EGJT or TGJT
Third party tested Cable has been tested as part of the TX6000 Category 6 U/UTP
™ Wire
Copper Cabling System by an independent laboratory and complies with snipping tool: CWST
the electrical channel requirements of ANSI/TIA-568-C.2 Category 6 Wire
and ISO 11801 Class E standards stripping tool: CJAST
Integrated Separates pairs for exceptional cable performance
pair divider *Color and pallet configurations:
Descending length Replace * with BU-CEG (Blue) or WH-CEG
Easy identification of remaining cable reduces installation time and
(White) to designate that color in a Euro pallet
cable markings cable scrap of 24 reels, 305m each.
Tested beyond Cable has been characterized to 550 MHz, 300 MHz above Replace * with BU-CED (Blue) or WH-CED
the standards the standard (White) to designate that color in a Euro pallet
of 18 reels, 500m each.
Packaged on a reel Ensures proper performance and provides quick installation **To designate color, replace suffix IW
(Off White) with AW (Arctic White), EI (Electric
Ivory), IG (International Gray), WH (White),
BL (Black), OR (Orange), RD (Red), BU (Blue),
applications GR (Green), YL (Yellow), or VL (Violet).
Add -24 to end of part number for 24-pack
TX6000™ U/UTP Copper Cable is a component of the Panduit® TX6000™ U/UTP Copper convenience package.
Cabling System. This end-to-end system provides Gigabit Ethernet performance with usable ^For lengths 1 to 10 meters (increments of
bandwidth beyond 250 MHz. With certified performance to the ANSI/TIA-568-C.2 Category 6 one meter) and 0.5, 1.5, 2.5, 15, 20 meters,
and ISO 11801 Class E standards, this system will support the following applications: change the length designation in the part
number to the desired length. For standard
• Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), 1000BASE-T (Gigabit Ethernet) cable colors other than Off White, add suffix
• 155 Mb/s ATM, 622 Mb/s ATM, 1.2 Gb/s ATM BL (Black), BU (Blue), RD (Red), GR (Green),
• Token ring 4/16 YL (Yellow), OR (Orange), or VL (Violet) after
the M in the part number. For example, the part
number for a blue 15-meter patch cord is
w w w. p an d uit .co m UTPSPL15MBUY.
TX6000™ Category 6 Copper Cable – UTP
additional specifications
Mechanical Test
Ultimate Breaking Strength >400 N (90 lbf.)
Minimum Bend Radius 4 x cable diameter
Electrical Test
Nominal Velocity of Propagation (NVP) 65%
Operating Voltage, Maximum 80V

cable construction

Jacket

Conductor Wire

Conductor
Insulator

Cross Divider

Rip Cord

WORLDWIDE SUBSIDIARIES AND SALES OFFICES

PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD.
Phone: 800.777.3300 London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia
[email protected] [email protected] [email protected] [email protected] [email protected]
Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020

For a copy of Panduit product warranties, log on to www.panduit.com/warranty

For more information

©2017 Panduit Corp.
Visit us at www.panduit.com ALL RIGHTS RESERVED.
COSP302--WW-ENG
Contact Customer Service by email: [email protected] Replaces WW-COSP219
or by phone: 800.777.3300 6/2017