Access Covers

For Airports and Ports

Specialised Engineering. Special Advice.

 Loading Group | F900 AREAS OF EXCEPTIONALLY HIGH WHEEL LOADS, AIRCRAFT HARDSTANDINGS, TAXIWAYS AT CIVIL AIRPORTS
CONTAINER PORTS AND DOCKYARDS WHERE INDIVIDUAL WHEEL LOADINGS EXCEED 20 TONNES
Loading Group | F900

Loading Group F900

COVERS AND FRAMES F900

Introduction
This section includes Gatic covers and frames designed for Loading Group F900.

In excess of 20 tonne slow moving

wheel load, test load 900kN – F900 assemblies are available with
Suitable for: a choice of cover designs –
recessed or solid top.
n Aircraft hardstandings and
taxiways at civil airports Recessed for concrete infill
n Container ports and dockyards Recessed covers are available in a
where individual wheel loadings choice of designs designated by a
exceed 20 tonnes ‘Type’ reference. F900 recessed
covers are available as Type DLF,
DM ,DMR and DM/F. Section
drawings of the different recessed
cover types are shown on the
following pages.

CONTAINER PORTS AND DOCKYARDS WHERE INDIVIDUAL WHEEL LOADINGS EXCEED 20 TONNES
AREAS OF EXCEPTIONALLY HIGH WHEEL LOADS, AIRCRAFT HARDSTANDINGS, TAXIWAYS AT CIVIL AIRPORTS
Solid top
Solid top cover types are lighter in
weight than recessed covers, and
feature a figured anti-slip surface.
Cover types Solid top covers are denoted by the
code Type STF depicted in section
Single covers and frames Duct covers and frames on the following pages.

Continuous trench covers and frames Multispan covers and frames

To prevent movement of covers
in high traffic conditions, we
recommend the use of a factory
fitted vibration-resistant locking
system. Can be fitted to recessed
covers only. See page 14.

64 Tel: +44 (0)1304 203545 Website: www.gatic.com Email: [email protected] Tel: +44 (0)1304 203545 Website: www.gatic.com Email: [email protected] 65
 Loading Group | F900 AREAS OF EXCEPTIONALLY HIGH WHEEL LOADS, AIRCRAFT HARDSTANDINGS, TAXIWAYS AT CIVIL AIRPORTS
CONTAINER PORTS AND DOCKYARDS WHERE INDIVIDUAL WHEEL LOADINGS EXCEED 20 TONNES
Loading Group | F900

COVERS AND FRAMES F900

Single recessed covers and frames Single solid top covers and frames
n Covers recessed for concrete infill n Covers with solid top
n Cover type: DLF, DMR, DM n Cover type STF
To specify state: To specify state:
1. Loading group 1. Loading group
2. Pit clear opening size length (L) x span (S) 2. Pit clear opening size length (L) x span (S)
3. Cover type 3. Cover type

CONTAINER PORTS AND DOCKYARDS WHERE INDIVIDUAL WHEEL LOADINGS EXCEED 20 TONNES
AREAS OF EXCEPTIONALLY HIGH WHEEL LOADS, AIRCRAFT HARDSTANDINGS, TAXIWAYS AT CIVIL AIRPORTS
Length (L) Length (L)
Pit clear opening Overall frame size Suggested rebate size Pit clear opening Overall frame size Suggested rebate size
Cover type Cover type
sizes L x S length x width x depth length x width x depth sizes L x S length x width x depth length x width x depth
750 x 300 DLF 900 x 540 x 75 1050 x 600 x 100 600 x 600 STF 750 x 820 x 140 1000 x 1000 x 165
600 x 450 DMR 750 x 670 x 140 1000 x 850 x 165 750 x 600 STF 900 x 820 x 140 1150 x 1000 x 165

Span (S)
Span (S)

750 x 450 DMR 900 x 670 x 140 1150 x 850 x 165 900 x 600 STF 1050 x 820 x 140 1300 x 1000 x 165
600 x 600 DMR 750 x 820 x 140 1000 x 1000 x 165 700 x 700 STF 850 x 920 x 140 1100 x 1100 x 165
750 x 600 DMR 900 x 820 x 140 1150 x 1000 x 165 750 x 750 STF 900 x 970 x 140 1150 x 1150 x 165
900 x 600 DMR 1050 x 820 x 140 1300 x 1000 x 165 900 x 750 STF 1050 x 970 x 140 1300 x 1150 x 165
Sugested rebate line Sugested rebate line
750 x 750 DMR 900 x 970 x 140 1150 x 1150 x 165 900 x 900 STF 1120 x 1120 x 140 1300 x 1300 x 165

900 x 750 DMR 1050 x 970 x 140 1300 x 1150 x 165 Plan of recessed single cover Plan of solid top single cover
For high density traffic conditions refer to page 14.
900 x 900 DMR 1120 x 1100 x 140 1300 x 1300 x 165
600 x 1050 DM 820 x 1270 x 140 1000 x 1450 x 165
750 x 1050 DM 970 x 1270 x 140 1150 x 1450 x 165
1000 x 1050 DM 1220 x 1270 x 140 1400 x 1450 x 165
600 x 1200 DM 820 x 1420 x 140 1000 x 1600 x 165
750 x 1200 DM 970 x 1420 x 140 1150 x 1600 x 165

Cover types Cover type

Covers and rebates to be filled with 45 cube or 40 cylinder concrete during installation using 10mm coarse aggregate Rebates to be filled with 45 cube or 40 cylinder concrete during installation using 10mm coarse aggregate
Full height webs Full height webs Full height webs Solid top covers
57 84 84
75 100 140 165 140 165 140 165
110 10 150
S 100 10 200
100 10 200 100 10 200
Pit clear opening span S S S
Pit clear opening span Pit clear opening span Pit clear opening span
Type DLF Type DMR Type DM Type STF

66 Tel: +44 (0)1304 203545 Website: www.gatic.com Email: [email protected] Tel: +44 (0)1304 203545 Website: www.gatic.com Email: [email protected] 67
 Loading Group | F900 AREAS OF EXCEPTIONALLY HIGH WHEEL LOADS, AIRCRAFT HARDSTANDINGS, TAXIWAYS AT CIVIL AIRPORTS
CONTAINER PORTS AND DOCKYARDS WHERE INDIVIDUAL WHEEL LOADINGS EXCEED 20 TONNES
Loading Group | F900

COVERS AND FRAMES F900

Recessed duct covers and frames Solid top duct covers and frames
n Covers recessed for concrete infill n Covers with solid top
n Cover type DLF, DMR, DM/F n Cover type STF
To specify state: To specify state:
1. Loading group 1. Loading group
2. Pit clear opening size 2. Pit clear opening size
length (L) x span (S) length (L) x span (S)
3. Cover type 3. Cover type

Length (L) Length (L)

Pit clear opening Cover Suggested rebate size
sizes type length x width x depth
300 DLF (L + 300) x 600 x 100
450 DMR (L + 400) x 850 x 165

Span (S)
Span (S)

600 DMR (L + 400) x 900 x 165

750 DMR (L + 400) x 1050 x 165
900 DMR (L + 400) x 1200 x 165
1050 DM/F (L + 400) x 1450 x 165
1200 DM/F (L + 400) x 1600 x 165

CONTAINER PORTS AND DOCKYARDS WHERE INDIVIDUAL WHEEL LOADINGS EXCEED 20 TONNES
AREAS OF EXCEPTIONALLY HIGH WHEEL LOADS, AIRCRAFT HARDSTANDINGS, TAXIWAYS AT CIVIL AIRPORTS
Sugested rebate line Sugested rebate line
1350 Refer to our technical department
1500 Refer to our technical department Plan of recessed duct cover Plan of solid top duct cover
Pit clear opening Cover Suggested rebate size
Pit clear opening Cover Standard pit clear opening length (L) sizes type length x width x depth
span (S) type 1300 1450 1600 1750 1900 2000 2150 2300 2450 2600 2700 2750 For high density traffic conditions refer to page 14.
600 STF (L + 400) x 1000 x 165
300 DLF 2 3
* * * * * * * * * * 700 STF (L + 400) x 1100 x 165
450 DMR 2 2 2 3 3 3 3 4
* * * * 750 STF (L + 400) x 1000 x 165
600 DMR 2 2 2 2 2 3 3 3 3 3 4 3 900 STF (L + 400) x 1150 x 165
750 DMR 2 2 2 2 2 3 3 3 3 3 4 3
900 DMR 2 2 2 2 2 3 3 3 3 3 4 3 Pit clear opening Cover Standard pit clear opening length (L)
1050 DM/F 2 2 2 3 3 3 3 4 span (S) type 1300 1450 1500 1600 1750 1900 2000 2150 2300 2450 2600 2700 2750
* * * *
1200 DM/F 2 2 2 3 3 3 3 4 600 STF 2 2 2 2 2 3 3 3 3 3 4 3
* * * * *
700 STF 2 3
Standard pit clear opening length (L) * * * * * * * * * * *
Pit clear opening Cover 750 STF 2 2 2 2 2 2 3 3 3 3 3 4 3
span (S) type 2850 2900 3000 3150 3300 3400 3550 3700 3850 3900 4000 4150
900 STF 2 2 2 2 2 3 3 3 3 3 4
300 DLF 4 5 * *
* * * * * * * * * *
450 DMR 4 4 4 4 5 5 5 5 5 5 Pit clear opening Cover Standard pit clear opening length (L)
* *
600 DMR 4 3 4 4 4 5 5 5 5 4 5 5 span (S) type 2850 2900 3000 3100 3150 3300 3400 3550 3700 3850 3900 4000 4150
750 DMR 4 3 4 4 4 5 5 5 5 4 5 5 600 STF 4 3 4 4 4 5 5 5 5 4 5 5
*
900 DMR 4 3 4 4 4 5 5 5 5 4 5 5 700 STF 4 5
* * * * * * * * * * *
1050 DM/F 4 4 4 4 5 5 5 5 5 5 750 STF 4 3 4 4 4 4 5 5 5 5 5 5 5
* *
1200 DM/F 4 4 4 4 5 5 5 5 5 5 900 STF 4 3 4 4 4 5 5 5 5 4 5 5
* * *
* Indicates standard sizes not available The number shown indicates the quantity of cover parts Other standard sizes may be available, refer to our technical department
* Indicates standard sizes not available The number shown indicates the quantity of cover parts Other standard sizes may be available, refer to our technical department

Cover types Cover type

Covers and rebates to be filled with 45 cube or 40 cylinder concrete during installation using 10mm coarse aggregate Rebates to be filled with 45 cube or 40 cylinder concrete during installation using 10mm coarse aggregate
Full height webs Full height webs Solid top covers
57 84
75 100 140 165 140 165
110 10 150
S
100 10 200 100 10 200
Pit clear opening span S S
Pit clear opening span Pit clear opening span
Type DLF Type DMR Type STF

68 Tel: +44 (0)1304 203545 Website: www.gatic.com Email: [email protected] Tel: +44 (0)1304 203545 Website: www.gatic.com Email: [email protected] 69
 Loading Group | F900 AREAS OF EXCEPTIONALLY HIGH WHEEL LOADS, AIRCRAFT HARDSTANDINGS, TAXIWAYS AT CIVIL AIRPORTS
CONTAINER PORTS AND DOCKYARDS WHERE INDIVIDUAL WHEEL LOADINGS EXCEED 20 TONNES
Loading Group | F900

COVERS AND FRAMES F900

Continuous recessed trench covers and frames Continuous solid top trench covers and frames
n Covers recessed for concrete infill n Covers with solid top
n Cover types: DLF, DMR, DM/F n Cover types: STF
To specify state: To specify state:
1. Loading group 1. Loading group
2. Cover type 2. Cover type
3. Supply layout drawing 3. Supply layout drawing
of trenches of trenches

Direction of sliding out covers Direction of sliding out covers

CONTAINER PORTS AND DOCKYARDS WHERE INDIVIDUAL WHEEL LOADINGS EXCEED 20 TONNES
AREAS OF EXCEPTIONALLY HIGH WHEEL LOADS, AIRCRAFT HARDSTANDINGS, TAXIWAYS AT CIVIL AIRPORTS
L L
Pit clear opening length Overall end plate

End terminations

Continuous recessed cover Gatic covers Continuous solid top cover

can be formed to
Pit clear opening span Cover type make continuous Pit clear opening span Cover type
trenches or
300 DLF 600 STF
layouts providing
450 DMR total access to 700 STF

600 DMR services below. 750 STF

750 DMR Construction 900 STF

drawings are Note: Solid top covers can only be supplied in continuous
900 DMR required so that straight runs
1050 DM/F Gatic cover
layout drawings
1200 DM/F
can be prepared.
1350 DM/F Standard Solid top covers are supplied
in straight runs. Junctions and splays
1500 DM/F
can be achieved by the inclusion of
For Type DM/F 1050,1200,1350 and 1500 spans
refer to our technical department
localised recessed covers. Refer to
our technical department for more
information.

For high density traffic conditions refer

to page 14.

Cover types Cover type

Covers and rebates to be filled with 45 cube or 40 cylinder concrete during installation using 10mm coarse aggregate Rebates to be filled with 45 cube or 40 cylinder concrete during installation using 10mm coarse aggregate
Full height webs Full height webs Solid top covers
57 84
75 100 140 165 140 165
110 10 150
S
100 10 200 100 10 200
Pit clear opening span S S
Pit clear opening span Pit clear opening span
Type DLF Type DMR Type STF

70 Tel: +44 (0)1304 203545 Website: www.gatic.com Email: [email protected] Tel: +44 (0)1304 203545 Website: www.gatic.com Email: [email protected] 71
 Loading Group | F900 AREAS OF EXCEPTIONALLY HIGH WHEEL LOADS, AIRCRAFT HARDSTANDINGS, TAXIWAYS AT CIVIL AIRPORTS
CONTAINER PORTS AND DOCKYARDS WHERE INDIVIDUAL WHEEL LOADINGS EXCEED 20 TONNES
Loading Group | F900

COVERS AND FRAMES F900

Multispan covers and frames Multispan covers and frames
Specification Product Selection
Below is sample specification information and notes for Multispan recessed covers Refer to the table to identify which cover and beam configuration you require against pit clear opening length (L) and pit clear
and frames. opening span (S). All dimensions are in millimetres.
For more details on features and benefits of Gatic covers, see pages 14 to 15. Note: All dimensions shown in red are made up using 700 x 700 solid top covers.

Pit clear opening length (L) mm

Loading group Gatic F900
In excess of 20 tonne wheel load – test load 900 kN. 2 parts 3 parts 4 parts Beam centres mm

1300
1450
1500
1600
1750
1900

2000
2150
2300
2300
2450
2600
2750
2900

2700
2850
3000
3100
3150
3300
3450
3600
3750
3900
A B C D E
Materials
Ductile iron components to BS EN 1563:1997. 1380 L 690 690

2 parts 1 beam
L L

Structural steel removable beams to BS 4-1:2005. 1530 840 690

A A A
Type DMR recessed 1580 S S S 790 790
1680 B B B 840 840
Finishes
1830 990 840
Units coated with black bituminous solution
1980 990 990
for protection during transit. 4 part (2x2) recessed 6 part (3x2) recessed multispan 8 part (4x2) recessed multispan cover with 1
multispan cover with 1 cover with 1 removable support removable support beam
Removable supporting steelwork galvanised to BS EN ISO 1461:2009. removable support beam beam

2160 690 780 690

Infill and surround concrete by customer 2310 L L L
690 930 690

CONTAINER PORTS AND DOCKYARDS WHERE INDIVIDUAL WHEEL LOADINGS EXCEED 20 TONNES
AREAS OF EXCEPTIONALLY HIGH WHEEL LOADS, AIRCRAFT HARDSTANDINGS, TAXIWAYS AT CIVIL AIRPORTS
3 parts 2 beams
Concrete strength, using 10mm coarse aggregate, to be: 2460 A A A 840 780 840
45N/mm2 for a test cube of 150mm or 2460 790 880 790
40N/mm2 for a test cylinder of 150mm diameter x 300mm high. 2610
S B S B S B
840 930 840
2760 C C C 840 1080 840
Installation 2910 990 930 990
In accordance with instructions supplied by Gatic. 3060 990 1080 990
6 part (2x3) recessed 9 part (3x3) recessed multispan 12 part (4x3) recessed multispan cover with 2
Type STF solid top

Pit clear opening span (S) mm

multispan cover with 2 cover with 2 removable support removable support beams
removable support beams beams

To specify use size and description format as follows: 2940 690 780 780 690
L L L
3090 840 780 780 690
Gatic Multispan Recessed covers and frames Cover type DMR recessed 3240 A A A 840 780 780 840

4 parts 3 beams
Multiple access covers recessed for concrete infill with removable beams. 3340 790 880 880 790
B B B
3390 S S S 840 930 930 690
.... in no. .... (length) x .... (span) mm pit clear opening multi span cover and frame. 3540 C C C 840 930 930 840
Gatic Type DMR Ductile Iron Recessed Cover in .... parts complete with 3690 D 990 930 930 840
D D
.... in no. .... x .... mm galvanised removable support beam spanning the .... (length) mm way. 3840 990 930 9030 990
3990 990 1080 1080 840
Suitable for Loading Group F900 – In excess of 20 Tonnes Wheel Load (pneumatic tyre).
4140 990 1080 1080 990
8 part (2x4) recessed 12 part (3x4) recessed multispan 16 part (4x4) recessed multispan cover with 3
Gatic Multispan Solid Top covers and frames Cover type STF solid top multispan cover with 3 cover with 3 removable support removable support beams
removable support beams beams
Multiple solid top access covers with removable beams.
3720 690 780 780 780 690
.... in no. .... (length) x .... (span) mm pit clear opening multi span cover and frame. 3870 L L L 690 780 930 780 690
4020 840 780 780 780 840
Gatic Type STF Ductile Iron Solid Top Cover in .... parts complete with A A A
4170 690 930 930 930 690

5 parts 4 beams
.... in no. .... x .... mm galvanised removable support beam spanning the .... (length) mm way. B B
4220 B
790 880 880 880 790
Suitable for Loading Group F900 – In excess of 20 Tonnes Wheel Load (pneumatic tyre). 4320 S C S C S C 840 930 780 930 840
4470 840 930 930 930 840
D D
Standard pit clear opening sizes are shown on Page 73. 4620
D
840 930 1080 930 840
4770 E E E 990 930 930 930 990
Beam sizes and other dimensions are shown on Pages 74 and 75. 4920 990 930 1080 930 990
5070 990 1080 930 1080 990
For high density traffic conditions refer to page 14. 5220 990 1080 1080 1080 990
10 part (2x5) recessed 15 part (3x5) recessed multispan 20 part (4x5) recessed multispan cover with 4
multispan cover with 4 cover with 4 removable support removable support beams
removable support beams beams

Note: For other pit clear opening sizes please refer to our technical department

73
72 Tel: +44 (0)1304 203545 Website: www.gatic.com Email: [email protected] Tel: +44 (0)1304 203545 Website: www.gatic.com Email: [email protected]
 Loading Group | F900 AREAS OF EXCEPTIONALLY HIGH WHEEL LOADS, AIRCRAFT HARDSTANDINGS, TAXIWAYS AT CIVIL AIRPORTS
CONTAINER PORTS AND DOCKYARDS WHERE INDIVIDUAL WHEEL LOADINGS EXCEED 20 TONNES
Loading Group | F900

COVERS AND FRAMES F900

Multispan covers and frames Multispan covers and frames

Type DMR recessed

Type DMR recessed

n Covers recessed for concrete infill or Beam Size

solid top Type STF solid top The required beam size for Multispan covers is
n Cover types: DMR (recessed) dependent on the pit clear opening length and the
loading group.

CONTAINER PORTS AND DOCKYARDS WHERE INDIVIDUAL WHEEL LOADINGS EXCEED 20 TONNES
AREAS OF EXCEPTIONALLY HIGH WHEEL LOADS, AIRCRAFT HARDSTANDINGS, TAXIWAYS AT CIVIL AIRPORTS
STF (solid top)
The details below show plan and sections of The table shows maximum beam length against
a typical recessed/solid top unit. Recessed cover type DMR Solid top cover type STF beam size. The removable support beams are
Direction of sliding out covers
supplied by Gatic.
For selection and specification guidance, Type STF solid top

165
The table also indicates dimensions of the beam
165

refer to pages 72, 73 and 75.

W

Removable support wallbox and rebate to suit different beam sizes.

X

beam (supplied by Gatic) Suggested

rebate for See also the accompanying section details.
end frame
150 10
Suggested
rebate for Y L Y
beam wallbox
Pit clear opening length Support beam size chart
Section A - A
Beam wallbox dimensions
165 Suggested Removable support Max pit clear
rebate for
side frame Recessed cover type DMR beam size opening length (L) V W X Y
B
150

356 x 171 x 67kg/m UB 1750 467 490 535 300

457 x 152 x 82kg/m UB 2300 568 595 635 300
533 x 210 x 122kg/m UB 3300 648 670 715 300
X 610 x 229 x 140kg/m UB 3900 720 745 790 300
A

D A Note: Removable support beams are supplied by Gatic

Pit clear opening span
430

Covers & rebates to be filled with 45 cube or 40 cylinder Full height web structure
Direction of sliding out covers concrete during installation using 10mm coarse aggregate Solid top cover
B

140
C A C 165

165
B
84

V
W

Removable support
X

beam (supplied by Gatic)

X
Suggested 100 10 Suggested
10

rebate for rebate for

side frame beam wallbox
100

Suggested 150 10 430

D B Solid top cover type STF rebate for
140 beam wallbox Y L 200 B A
Pit clear opening length S
Pit clear opening span
Section B - B Plan showing recessed and solid top cover options Section C - C Section D - D

74 Tel: +44 (0)1304 203545 Website: www.gatic.com Email: [email protected] Tel: +44 (0)1304 203545 Website: www.gatic.com Email: [email protected] 75
 Loading Group | up to F900 Loading Group | up to F900

Special range of access covers

SPECIAL RANGE OF ACCESS COVERS AND DRAINAGE GRATINGS up to F900

and drainage gratings

Introduction
Gatic has developed a specialised range of products suitable for loading groups up to F900.

This section covers:

n Solid top spring assisted covers

n Gas assisted covers
n Hinged hydrant covers
n Circular covers
n Hinged safety grids
n Galvanised covers and gratings
n Gratings and frames
n Plug covers and cut outs

Hinged safety grids Page 80 Circular covers Page 81

Gratings and frames Page 82-83 Spring assisted lift covers Page 78 Hydrant covers Page 81

Gas assisted lift covers Page 79 Galvanised covers and gratings Page 80 Plug Covers and Cut Outs Page 84

76 Tel: +44 (0)1304 203545 Website: www.gatic.com Email: [email protected] Tel: +44 (0)1304 203545 Website: www.gatic.com Email: [email protected] 77
 Loading Group | up to F900 Loading Group | up to F900

Special range of access covers Special range of access covers

SPECIAL RANGE OF ACCESS COVERS AND DRAINAGE GRATINGS up to F900

Solid top gas assist lift cover

To specify state:
1. Loading group
2. Pit clear opening size
length (L) x span (S)
Solid top spring assisted covers To specify state: 3. Cover type
1. Loading group
Spring assist lift covers are recommended for use where regular access is
required, and are designed for single person operation. The spring assist lift cover 2. Pit clear opening size
has a maximum operating weight of approximately 15kg. length (L) x span (S)
3. Cover type
The units are fitted with flush hinges and can be opened from the side of the pit
allowing maximum access to equipment.

External latch operation point to open

cover with the use of a key Latch locking bolt
Recessed gas assist lift cover

Single

165
280
Pit clear opening Cover Overall frame size Suggested rebate size Solid and recessed top gas assisted covers
200 900 pit clear opening 200
sizes type length x width x depth length x width x depth
Gas Assist lift covers are recommended for use where regular access is required,
750 x 750 SSA 970 x 970 x 100 1050 x 1050 x 125 Latch and locking mechanism and are designed for single person operation. The gas assist lift cover has a Solid top cover, Type SGA

900 x 900 SSA 1120 x 1120 x 100 1200 x 1200 x 125 Maximum operating weight of approximately 25kg.
Rebates to be filled The units are fitted with flush hinges and can be fitted within larger units including
Double with 45 cube or 40
cylinder concrete
ducts or multispan units.
Torsion springs during installation
using 10mm For more details or information on other sizes refer to our technical department.
Pit clear opening Cover Overall frame size Suggested rebate size coarse aggregate
sizes type length x width x depth length x width x depth
Solid top or recessed
1500 x 750 SSA 1720 x 970 x 100 1850 x 1050 x 125
1800 x 900 SSA 2020 x 1120 x 100 2300 x 1200 x 125 Pit clear opening Cover Overall frame size Suggested rebate size

165
150 910 Pit clear opening 150

280
sizes type length x width x depth length x width x depth
900 x 900 (Solid) SGA 1120 x 1120 x 140 1300 x 1300 x 165 200 900 pit clear opening 200

900 x 900 (recessed) RGA 1120 x 1120 x 140 1300 x 1300 x 165 Recessed cover, Type RGA

78 Tel: +44 (0)1304 203545 Website: www.gatic.com Email: [email protected] Tel: +44 (0)1304 203545 Website: www.gatic.com Email: [email protected] 79
 Loading Group | up to F900 Loading Group | up to F900

Special range of access covers Special range of access covers

SPECIAL RANGE OF ACCESS COVERS AND DRAINAGE GRATINGS up to F900

Hinged safety grids Hinged hydrant covers
Gatic covers can be supplied with mild steel galvanised safety grids when required. Hydrant lids can be supplied as single
Once the cover is removed, the safety grid can be hinged to the vertical position covers or set into a larger cover. This
where it will lock safely in place. Safety grids can be locked in a closed position provides localised access without
by using customer-supplied padlocks. removing the larger cover.
Hinged safety grills can be fitted to all gatic units from single covers to multispan. Hydrants fitted within larger covers
are 400 x 300 clear opening, centrally
positioned. Double hydrant covers

To specify state:
1. Loading group
2. Pit clear opening size
length (L) x span (S)
3. Cover type
Single and double covers fitted with 400 x 300 hinged hydrant

Pit clear opening Cover Overall frame size Suggested rebate size
Locked when open, locking unit handle sizes type length x width x depth length x width x depth
Safety grid
shown fully

165
open at 110° Locked when open, locking
700 x 700 MHS/H 850 x 920 x 140 1100 x 1100 x 165
unit is automaticaly engaged
when safety grid is opened 900 x 900 MHS/H 850 x 920 x 140 1300 x 1300 x 165 300
11
0°
10
1500 x 700 MHS/H 1720 x 920 x 140 1900 x 1100 x 165 700
165
1900 x 900 MHS/H 2120 x 1120 x 140 2300 x 1300 x 165 100 Pit clear opening span 200

Single and double units - including a 400 x 300 hinged hydrant cover centrally positioned in each cover

Clear opening - 180

Safety grid Hydrant covers
hinged 200 200
Pit clear opening Cover shown in open
bracket
position. (110° minimum)
Pit clear opening Cover Overall frame size Suggested rebate size

150
sizes type length x width x depth length x width x depth

175
225 x 225 FH 391 x 391 x 150 525 x 525 x 175
88 250 78

Alternative finish 450 x 250 FH 616 x 416 x 150 750 x 550 x 175
150 C/O 150
500 x 250 FH 666 x 416 x 150 800 x 550 x 175
galvanised covers
and gratings
Gatic covers and gratings are supplied
painted with black bituminous paint Solid top circular covers
as standard. This acts as temporary
protection during transit. Where Suitable for up to F900 loading.
additional protection is required, Gatic 774 overall
ductile iron covers can be supplied To specify state:
galvanised to BS EN ISO 1461:2009.

100
1. Loading group

125
Refer to Gatic technical department for
2. Pit clear opening size = =
more information.
length (L) x span (S)
200 200
3. Cover type 600 diameter pit clear opening

Pit clear opening Cover Overall frame size Suggested rebate size
sizes type length x width x depth length x width x depth
600mm diameter GC 775 diameter 1000 diameter
750mm diameter GC 1000 diameter 1150 diameter

80 Tel: +44 (0)1304 203545 Website: www.gatic.com Email: [email protected] Tel: +44 (0)1304 203545 Website: www.gatic.com Email: [email protected] 81
 Loading Group | up to F900 Loading Group | up to F900

Special range of drainage gratings Special range of drainage gratings

SPECIAL RANGE OF ACCESS COVERS AND DRAINAGE GRATINGS up to F900

Single gratings and Trench gratings and
frames frames
Drainage gratings are supplied where Gatic gratings and frames can be
surface water drainage is required. manufactured in continuous runs.
A layout drawing with enquiries will
enable our technical department to
To specify state: design an appropriate layout of
1. Loading group gratings.
2. Pit clear opening size
length (L) x span (S)
3. Grating type

Trench gratings
Pit clear opening Overall frame size Suggested rebate size Waterway
Grating type
sizes length x width x depth length x width x depth per metre
300 DRG/100 1000 x 480 x 100 L x 600 x 125 1813cm2
Single gratings 850 450 DRG/100 1000 x 630 x 100 L x 750 x 125 2629cm2
600 DRG/100 1000 x 800 x 100 L x 1000 x 125 3445cm2
165

Pit clear Grating Overall frame size Suggested rebate size Waterway
opening sizes type length x width x depth length x width x depth per unit 750 DRG/100 1000 x 950 x 100 L x 1150 x 125 4329cm2
850
Pit clear opening 810 DRG/100 1000 x 1010 x 100 L x 1200 x 125 4466cm2
850 x 300 DRG/140 870 x 480 x 140 1000 x 600 x 125 1256cm2 75 75

850 x 450 DRG/140 870 x 630 x 140 1000 x 750 x 125 2215cm 2 Rebates to be filled with 45 cube
or 40 cylinder concrete during installation
using 10mm coarse aggregate
850 x 600 DMG 870 x 800 x 140 1000 x 1000 x 165 2768cm2
140

165

700 x 750 DMG 720 x 950 x 140 850 x 1150 x 165 2290cm2
80
7
Single gratings with shutter plates 200
S
200
Pit clear
opening span
Pit clear Grating Overall frame size Suggested rebate size Waterway
opening sizes type length x width x depth length x width x depth pre unit Type DRG/140
2
914 x 310 DRG/140/S 950 x 480 x 140 1065 x 600 x 125 1256cm
700 or 850
914 x 457 DRG/140/S 950 x 630 x 140 1065 x 750 x 125 2215cm2
165

914 x 610 DMG/S 950 x 800 x 140 1065 x 1000 x 165 2768cm2
700 or 850
75 Pit clear opening 75
S Shutter plates Frame
950 overall shutter plates levelling Rebates to be filled with 45 cube
bolt or 40 cylinder concrete during installation
using 10mm coarse aggregate
140
165

165

Rebates to be filled with 45 cube

140

1000
165

or 40 cylinder concrete during installation

10
using 10mm coarse aggregate modular length End termination plate
914 10

125

125
100

80 7 7 80
75 Pit clear opening 75 100
200 310 200 S
Rebates to be filled with 45 cube or 40 cylinder concrete 200 Pit clear 200 78
during installation using 10mm coarse aggregate Pit clear opening opening span
12
S
Section through drainage trench Section through end termination
150 Pit clear 150
Type DRG/140/S - DMG/S similar Type DMG opening span

82 Tel: +44 (0)1304 203545 Website: www.gatic.com Email: [email protected] Tel: +44 (0)1304 203545 Website: www.gatic.com Email: [email protected] 83