Scribd
Upload
179 views58 pages

GAD - Gallaf - After TBC Revc PDF

This document contains a bill of materials and technical specifications for a pressure safety valve (Tag-Nos. 1+2 ASDCA-PSV-330019). It lists 56 components made of various steel and alloy materials, including an angular body, nozzle, disc, guide, bonnet, spindle, and springs. It provides key valve data like an orifice size of 22.5mm, set pressure of 139.5 bar-g, and inlet/outlet connection sizes and types. Dimensional drawings include overall height, weight and other measurements. The valve is intended for conventional API service.

Uploaded by

Daniel Duong
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
179 views58 pages

GAD - Gallaf - After TBC Revc PDF

This document contains a bill of materials and technical specifications for a pressure safety valve (Tag-Nos. 1+2 ASDCA-PSV-330019). It lists 56 components made of various steel and alloy materials, including an angular body, nozzle, disc, guide, bonnet, spindle, and springs. It provides key valve data like an orifice size of 22.5mm, set pressure of 139.5 bar-g, and inlet/outlet connection sizes and types. Dimensional drawings include overall height, weight and other measurements. The valve is intended for conventional API service.

Uploaded by

Daniel Duong
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 58

Sectional Drawing Tag Numbers Bill of Material

Pos. Description Material Grade Qty. Remarks


Tag-No. 1 + 2 ASDCA-PSV-330019 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5212 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice G
d0 22.5 mm 0.886 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 136.80 bar-g
Inlet Connection NPS 2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 3"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 59.5 kg
a 156 mm
b 172 mm
H 645 mm
s1 68 mm 00 Issue for approval SAP 19.04.2019
s2 29 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 10


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413166-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASDCA-PSV-330020 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5212 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice G
d0 22.5 mm 0.886 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 136.80 bar-g
Inlet Connection NPS 2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 3"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 59.5 kg
a 156 mm
b 172 mm
H 645 mm
s1 68 mm 00 Issue for approval SAP 19.04.2019
s2 29 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 20


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413167-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASDCA-PSV-340207 ASDCA-PSV-340207 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited + welded
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
11 Spacer 1.4408/SA-351 CF8M - SS 1
12 Spindle 1.4404/316L - SS 1
15 Bellows - 1
16 Spring plate 1.0460/SA-105 - CS 1
17 Spring plate 1.0460/SA-105 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 0.7040/60-40-18 - Cast Iron 1
Valve Application 52 Spring 2.4669 - ALLOY X750 1 not applicable
Description Valve Data 53 Spring - - not applicable
Article No. 5263.5602 54 Spring 2.4669 - ALLOY X750 1
Product Group API 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 12
Valve Type Conventional Design 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 12
Bonnet type Bonnet closed 60 Gasket Graphit/1.4401 - SS 1
Orifice Q 73 Lock screw 1.4404/316L - SS 1
d0 105.5 mm 4.154 "
Set Pressure 13.80 bar-g
Cold Diff Test Pressure (cdtp) 13.40 bar-g
Inlet Connection NPS 6"
CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 8"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 226.3 kg
a 240 mm
b 241 mm
H 1,056 mm
s1 68 mm 00 Issue for approval SAP 25.04.2019
s2 31 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 30


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413168-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASDCA-PSV-340112 ASDCA-PSV-340112 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited + welded
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
15 Bellows 2.4856/N06625 ALLOY 625 1 Connecting part:1.4404/316L-SS
16 Spring plate 1.4122 - SS 1
17 Spring plate 1.4122 - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 0.7040/60-40-18 - Cast Iron 1
52 Spring - - not applicable
Valve Application 53 Spring - - not applicable
Description Valve Data 54 Spring 2.4669 - ALLOY X750 1
Article No. 5263.5672 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 12
Product Group API 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 12
Valve Type Bellows Design 60 Gasket Graphit/1.4401 - SS 3
Bonnet type Vented Bonnet 73 Lock screw 1.4404/316L - SS 1
Orifice T
d0 161.5 mm 6.358 "
Set Pressure 13.80 bar-g
Cold Diff Test Pressure (cdtp) 13.80 bar-g
Inlet Connection NPS 8"
CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 10"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 467.5 kg
a 276 mm
b 279 mm
H 1,402 mm
s1 62 mm 00 Issue for approval SAP 19.04.2019
s2 31 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 40


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
BELLOWS
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413169-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASDCA-PSV-340113 ASDCA-PSV-340113 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited + welded
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
15 Bellows 2.4856/N06625 ALLOY 625 1 Connecting part:1.4404/316L-SS
16 Spring plate 1.4122 - SS 1
17 Spring plate 1.4122 - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 0.7040/60-40-18 - Cast Iron 1
52 Spring - - not applicable
Valve Application 53 Spring - - not applicable
Description Valve Data 54 Spring 2.4669 - ALLOY X750 1
Article No. 5263.5672 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 12
Product Group API 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 12
Valve Type Bellows Design 60 Gasket Graphit/1.4401 - SS 3
Bonnet type Vented Bonnet 73 Lock screw 1.4404/316L - SS 1
Orifice T
d0 161.5 mm 6.358 "
Set Pressure 14.50 bar-g
Cold Diff Test Pressure (cdtp) 14.50 bar-g
Inlet Connection NPS 8"
CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 10"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 467.5 kg
a 276 mm
b 279 mm
H 1,402 mm
s1 62 mm 00 Issue for approval SAP 19.04.2019
s2 31 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 50


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
BELLOWS
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413170-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASDCA-PSV-360005 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
11 Spacer 1.4408/SA-351 CF8M - SS 1
12 Spindle 1.4404/316L - SS 1
15 Bellows 2.4856/N06625 ALLOY 625 1 Connecting part:1.4404/316L-SS
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
Valve Application 52 Spring - - not applicable
Description Valve Data 53 Spring 2.4669 - ALLOY X750 1 not applicable
Article No. 5263.5522 54 Spring 2.4669 - ALLOY X750 1
Product Group API 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 8
Valve Type Bellows Design 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 8
Bonnet type Vented Bonnet 60 Gasket Graphit/1.4401 - SS 3
Orifice N 73 Lock screw 1.4404/316L - SS 1
d0 66.0 mm 2.598 "
Set Pressure 46.60 bar-g
Cold Diff Test Pressure (cdtp) 46.60 bar-g
Inlet Connection NPS 4"
CL 600 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 6"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 133.9 kg
a 197 mm
b 222 mm
H 855 mm
s1 72 mm 00 Issue for approval SAP 19.04.2019
s2 26 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 60


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
BELLOWS
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413171-00
Sectional Drawing Tag Numbers Bill of Material
Tag-No. 1 + 2 ASDCA-PSV-360005 Pos. Description Material Grade Qty. Remarks
1.0 Main valve acc. to sheet 2 1
2.0 Pilot valve acc. to sheet 3 1
2.1 Manifold block acc. to sheet 4 1
3.0 Field test connector 1.4404/316L - SS + FKM [L] 1
4.0 Filter 1.4404/316L - SS + FKM [L] 1
8.0 Tubing 1.4571/316Ti - SS 1

Valve Application
Description Valve Data
Article No. 8213.0790
Product Group High Efficiency
Valve Type Pilot Operated
Seat Design Semi Nozzle Design
Orifice M
d0 63.0 mm 2.480 "
Set Pressure 46.60 bar-g
Cold Diff Test Pressure (cdtp) 46.60 bar-g
Inlet Connection NPS 4"
CL 600 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 6"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values Descriptions Values
Weight 97.3 kg
a 197 mm
b 210 mm
H 584 mm
s1 46 mm 00 Issue for approval SAP 19.04.2019
s2 30 mm
A 249 mm
B 110 mm
C 18 mm
D 285 mm
E 433 mm
F 333 mm

LESER GmbH & Co. KG, Germany


Further Data
LESER Job-No. / item 10262833 / 61 Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
PILOT OPERATED
1/ 4
RELIEF SAFETY VALVE
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve. LESER GAD-No. Client DWG-No. Client Rev.
This document is done automatically and is valid without signature.
10000413172-00
Sectional Drawing Tag Numbers Bill of Material
Tag-No. 1 + 2 ASDCA-PSV-360005 Pos. Description Material Grade Qty. Remarks
1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
2 Pitot tube 1.4404/316L - SS 1
Main valve Seat 1
5 1.4404/316L - SS
6.1 Piston - basic body 1.4404/316L - SS 1
6.2 Piston - upper part 1.4404/316L - SS 1
6.3 O-Ring FKM [L] 1
6.4 Backup ring PTFE 1
6.5 Guide ring PTFE + carbon 2
7 Disc 1.4404/316L - SS 1
8 Piston guide 1.4404/316L - SS 1
Valve Application 9 Top plate 1.4404/316L - SS 1
Description Valve Data 55 Stud SA-193 B8M - SS 8
Article No. 8213.0790 56 Nut SA-194 8M - SS 8
Product Group High Efficiency 59 Spring 2.4669 - Alloy X-750 1
Valve Type Pilot Operated 60 O-Ring FKM [L] 1
Seat Design Semi Nozzle Design 61 O-Ring FKM [L] 1
Orifice M 62 Backup ring PTFE 1
d0 63.0 mm 2.480 " 63 O-Ring FKM [L] 1
Set Pressure 46.60 bar-g 67 O-Ring FKM [L] 1
Cold Diff Test Pressure (cdtp) 46.60 bar-g
Inlet Connection NPS 4"
CL 600 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 6"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
a 197 mm
b 210 mm
H1 445 mm
s1 46 mm
s2 30 mm 00 Issue for approval SAP 19.04.2019

LESER GmbH & Co. KG, Germany


Further Data
LESER Job-No. / item 10262833 / 61 Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
PILOT OPERATED
2/ 4
RELIEF SAFETY VALVE
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve. LESER GAD-No. Client DWG-No. Client Rev.
This document is done automatically and is valid without signature.
10000413172-00
Sectional Drawing Tag Numbers Bill of Material
Tag-No. 1 + 2 ASDCA-PSV-360005 Pos. Description Material Grade Qty. Remarks
1 Body 1.4404/316L - SS 1
2 Guide bush 1.4404/316L - SS 1
Pilot valve Seat 1
5 1.4404/316L - SS
7 Disc 1.4404/316L - SS 1
8 Disc 1.4404/316L - SS 1
9 Bonnet 1.4404/316L - SS 1
11 Disc 1.4404/316L - SS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4122 - SS 1
17 Spring plate 1.4122 - SS 1
Valve Application 18 Adjusting screw 1.4404/316L - SS 1
Description Valve Data 20 Plug screw 1.4404/316L - SS 1
Article No. 8213.0790 30 O-Ring FKM [L] 2
Product Group High Efficiency 31 O-Ring FKM [L] 1
Valve Type Pilot Operated 32 O-Ring FKM [L] 1
Seat Design Semi Nozzle Design 33 Backup ring FKM [L] 1
Orifice M 34 O-Ring FKM [L] 1
d0 63.0 mm 2.480 " 35 O-Ring FKM [L] 1
Set Pressure 46.60 bar-g 40 Cap/ Lifting device 1.4404/316L - SS 1
Cold Diff Test Pressure (cdtp) 46.60 bar-g 41 Piston 1.4404/316L - SS 1
Inlet Connection NPS 4" 42 Return spring 2.4669 - ALLOY X750 1
CL 600 ASME B16.5 45 Disc 1.4404/316L - SS 1
RF - SerSpiral fin, Ra=3.2-6.3 46 O-Ring FKM [L] 1
47 Calotte 1.4404/316L - SS 1
Outlet Connection NPS 6" 53 Spring - - not applicable
CL 150 ASME B16.5 54 Spring 1.4310 - Stainless Steel 1
RF - SerSpiral fin, Ra=3.2-6.3 64 Bug screen PA GF 1

Rev. Status Editor Releaser Date

00 Issue for approval SAP 19.04.2019

LESER GmbH & Co. KG, Germany


Further Data
LESER Job-No. / item 10262833 / 61 Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
PILOT OPERATED
3/ 4
RELIEF SAFETY VALVE
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve. LESER GAD-No. Client DWG-No. Client Rev.
This document is done automatically and is valid without signature.
10000413172-00
Sectional Drawing Tag Numbers Bill of Material
Tag-No. 1 + 2 ASDCA-PSV-360005 Pos. Description Material Grade Qty. Remarks
24.1 Manifold block 1.4404/316L - SS 1
24.2 Bush 1.4404/316L - SS 1
Manifold block Piston 1
24.3 1.4404/316L - SS
24.4 O-Ring FKM [L] 3
24.5 O-Ring FKM [L] 2
24.6 O-Ring FKM [L] 2
24.7 Plug screw A4-70 - SS 2
24.8 Distance ring 1.4401 - SS 2

Valve Application
Description Valve Data
Article No. 8213.0790
Product Group High Efficiency
Valve Type Pilot Operated
Seat Design Semi Nozzle Design
Orifice M
d0 63.0 mm 2.480 "
Set Pressure 46.60 bar-g
Cold Diff Test Pressure (cdtp) 46.60 bar-g
Inlet Connection NPS 4"
CL 600 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 6"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Rev. Status Editor Releaser Date

00 Issue for approval SAP 19.04.2019

LESER GmbH & Co. KG, Germany


Further Data
LESER Job-No. / item 10262833 / 61 Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
PILOT OPERATED
4/ 4
RELIEF SAFETY VALVE
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve. LESER GAD-No. Client DWG-No. Client Rev.
This document is done automatically and is valid without signature.
10000413172-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASDCA-PSV-360007 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
11 Spacer 1.4408/SA-351 CF8M - SS 1
12 Spindle 1.4404/316L - SS 1
15 Bellows 2.4856/N06625 ALLOY 625 1 Connecting part:1.4404/316L-SS
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
Valve Application 52 Spring - - not applicable
Description Valve Data 53 Spring 2.4669 - ALLOY X750 1 not applicable
Article No. 5263.5522 54 Spring 2.4669 - ALLOY X750 1
Product Group API 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 8
Valve Type Bellows Design 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 8
Bonnet type Vented Bonnet 60 Gasket Graphit/1.4401 - SS 3
Orifice N 73 Lock screw 1.4404/316L - SS 1
d0 66.0 mm 2.598 "
Set Pressure 46.60 bar-g
Cold Diff Test Pressure (cdtp) 46.60 bar-g
Inlet Connection NPS 4"
CL 600 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 6"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 133.9 kg
a 197 mm
b 222 mm
H 855 mm
s1 72 mm 00 Issue for approval SAP 19.04.2019
s2 26 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 70


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
BELLOWS
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413173-00
Sectional Drawing Tag Numbers Bill of Material
Tag-No. 1 + 2 ASDCA-PSV-360007 Pos. Description Material Grade Qty. Remarks
1.0 Main valve acc. to sheet 2 1
2.0 Pilot valve acc. to sheet 3 1
2.1 Manifold block acc. to sheet 4 1
3.0 Field test connector 1.4404/316L - SS + FKM [L] 1
4.0 Filter 1.4404/316L - SS + FKM [L] 1
8.0 Tubing 1.4571/316Ti - SS 1

Valve Application
Description Valve Data
Article No. 8213.0790
Product Group High Efficiency
Valve Type Pilot Operated
Seat Design Semi Nozzle Design
Orifice M
d0 63.0 mm 2.480 "
Set Pressure 46.60 bar-g
Cold Diff Test Pressure (cdtp) 46.60 bar-g
Inlet Connection NPS 4"
CL 600 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 6"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values Descriptions Values
Weight 97.3 kg
a 197 mm
b 210 mm
H 584 mm
s1 46 mm 00 Issue for approval SAP 19.04.2019
s2 30 mm
A 249 mm
B 110 mm
C 18 mm
D 285 mm
E 433 mm
F 333 mm

LESER GmbH & Co. KG, Germany


Further Data
LESER Job-No. / item 10262833 / 71 Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
PILOT OPERATED
1/ 4
RELIEF SAFETY VALVE
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve. LESER GAD-No. Client DWG-No. Client Rev.
This document is done automatically and is valid without signature.
10000413174-00
Sectional Drawing Tag Numbers Bill of Material
Tag-No. 1 + 2 ASDCA-PSV-360007 Pos. Description Material Grade Qty. Remarks
1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
2 Pitot tube 1.4404/316L - SS 1
Main valve Seat 1
5 1.4404/316L - SS
6.1 Piston - basic body 1.4404/316L - SS 1
6.2 Piston - upper part 1.4404/316L - SS 1
6.3 O-Ring FKM [L] 1
6.4 Backup ring PTFE 1
6.5 Guide ring PTFE + carbon 2
7 Disc 1.4404/316L - SS 1
8 Piston guide 1.4404/316L - SS 1
Valve Application 9 Top plate 1.4404/316L - SS 1
Description Valve Data 55 Stud SA-193 B8M - SS 8
Article No. 8213.0790 56 Nut SA-194 8M - SS 8
Product Group High Efficiency 59 Spring 2.4669 - Alloy X-750 1
Valve Type Pilot Operated 60 O-Ring FKM [L] 1
Seat Design Semi Nozzle Design 61 O-Ring FKM [L] 1
Orifice M 62 Backup ring PTFE 1
d0 63.0 mm 2.480 " 63 O-Ring FKM [L] 1
Set Pressure 46.60 bar-g 67 O-Ring FKM [L] 1
Cold Diff Test Pressure (cdtp) 46.60 bar-g
Inlet Connection NPS 4"
CL 600 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 6"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
a 197 mm
b 210 mm
H1 445 mm
s1 46 mm
s2 30 mm 00 Issue for approval SAP 19.04.2019

LESER GmbH & Co. KG, Germany


Further Data
LESER Job-No. / item 10262833 / 71 Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
PILOT OPERATED
2/ 4
RELIEF SAFETY VALVE
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve. LESER GAD-No. Client DWG-No. Client Rev.
This document is done automatically and is valid without signature.
10000413174-00
Sectional Drawing Tag Numbers Bill of Material
Tag-No. 1 + 2 ASDCA-PSV-360007 Pos. Description Material Grade Qty. Remarks
1 Body 1.4404/316L - SS 1
2 Guide bush 1.4404/316L - SS 1
Pilot valve Seat 1
5 1.4404/316L - SS
7 Disc 1.4404/316L - SS 1
8 Disc 1.4404/316L - SS 1
9 Bonnet 1.4404/316L - SS 1
11 Disc 1.4404/316L - SS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4122 - SS 1
17 Spring plate 1.4122 - SS 1
Valve Application 18 Adjusting screw 1.4404/316L - SS 1
Description Valve Data 20 Plug screw 1.4404/316L - SS 1
Article No. 8213.0790 30 O-Ring FKM [L] 2
Product Group High Efficiency 31 O-Ring FKM [L] 1
Valve Type Pilot Operated 32 O-Ring FKM [L] 1
Seat Design Semi Nozzle Design 33 Backup ring FKM [L] 1
Orifice M 34 O-Ring FKM [L] 1
d0 63.0 mm 2.480 " 35 O-Ring FKM [L] 1
Set Pressure 46.60 bar-g 40 Cap/ Lifting device 1.4404/316L - SS 1
Cold Diff Test Pressure (cdtp) 46.60 bar-g 41 Piston 1.4404/316L - SS 1
Inlet Connection NPS 4" 42 Return spring 2.4669 - ALLOY X750 1
CL 600 ASME B16.5 45 Disc 1.4404/316L - SS 1
RF - SerSpiral fin, Ra=3.2-6.3 46 O-Ring FKM [L] 1
47 Calotte 1.4404/316L - SS 1
Outlet Connection NPS 6" 53 Spring - - not applicable
CL 150 ASME B16.5 54 Spring 1.4310 - Stainless Steel 1
RF - SerSpiral fin, Ra=3.2-6.3 64 Bug screen PA GF 1

Rev. Status Editor Releaser Date

00 Issue for approval SAP 19.04.2019

LESER GmbH & Co. KG, Germany


Further Data
LESER Job-No. / item 10262833 / 71 Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
PILOT OPERATED
3/ 4
RELIEF SAFETY VALVE
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve. LESER GAD-No. Client DWG-No. Client Rev.
This document is done automatically and is valid without signature.
10000413174-00
Sectional Drawing Tag Numbers Bill of Material
Tag-No. 1 + 2 ASDCA-PSV-360007 Pos. Description Material Grade Qty. Remarks
24.1 Manifold block 1.4404/316L - SS 1
24.2 Bush 1.4404/316L - SS 1
Manifold block Piston 1
24.3 1.4404/316L - SS
24.4 O-Ring FKM [L] 3
24.5 O-Ring FKM [L] 2
24.6 O-Ring FKM [L] 2
24.7 Plug screw A4-70 - SS 2
24.8 Distance ring 1.4401 - SS 2

Valve Application
Description Valve Data
Article No. 8213.0790
Product Group High Efficiency
Valve Type Pilot Operated
Seat Design Semi Nozzle Design
Orifice M
d0 63.0 mm 2.480 "
Set Pressure 46.60 bar-g
Cold Diff Test Pressure (cdtp) 46.60 bar-g
Inlet Connection NPS 4"
CL 600 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 6"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Rev. Status Editor Releaser Date

00 Issue for approval SAP 19.04.2019

LESER GmbH & Co. KG, Germany


Further Data
LESER Job-No. / item 10262833 / 71 Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
PILOT OPERATED
4/ 4
RELIEF SAFETY VALVE
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve. LESER GAD-No. Client DWG-No. Client Rev.
This document is done automatically and is valid without signature.
10000413174-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASDCA-PSV-350003 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring 2.4669 - ALLOY X750 1
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5282 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice H
d0 28.3 mm 1.114 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 136.00 bar-g
Inlet Connection NPS 2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 3"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 66.1 kg
a 154 mm
b 162 mm
H 642 mm
s1 56 mm 00 Issue for approval SAP 19.04.2019
s2 29 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 80


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413175-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASDCA-PSV-350004 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring 2.4669 - ALLOY X750 1
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5282 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice H
d0 28.3 mm 1.114 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 136.00 bar-g
Inlet Connection NPS 2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 3"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 66.1 kg
a 154 mm
b 162 mm
H 642 mm
s1 56 mm 00 Issue for approval SAP 19.04.2019
s2 29 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 90


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413176-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASDCA-PSV-350010 ASDCA-PSV-350010 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4462/S31803 - DUPLEX SS 1
7 Disc 1.4462/S31803 - DUPLEX SS 1
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring 2.4669 - ALLOY X750 1
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5032 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice D
d0 14.0 mm 0.551 "
Set Pressure 228.00 bar-g
Cold Diff Test Pressure (cdtp) 227.80 bar-g
Inlet Connection NPS 1 1/2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 2"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 29.9 kg
a 105 mm
b 140 mm
H 500 mm
s1 44 mm 00 Issue for approval SAP 19.04.2019
s2 22 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 100


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413177-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASDCA-PSV-290127 ASDCA-PSV-290127 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.0718 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5032 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice D
d0 14.0 mm 0.551 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 136.80 bar-g
Inlet Connection NPS 1 1/2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 2"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 29.3 kg
a 105 mm
b 140 mm
H 500 mm
s1 44 mm 00 Issue for approval SAP 19.04.2019
s2 22 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 110


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413178-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASDCA-PSV-291127 ASDCA-PSV-291127 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.0718 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5032 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice D
d0 14.0 mm 0.551 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 136.80 bar-g
Inlet Connection NPS 1 1/2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 2"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 29.3 kg
a 105 mm
b 140 mm
H 500 mm
s1 44 mm 00 Issue for approval SAP 19.04.2019
s2 22 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 120


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413179-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASDCA-PSV-570304 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
11 Spacer 1.4408/SA-351 CF8M - SS 1
12 Spindle 1.4404/316L - SS 1
15 Bellows 2.4856/N06625 ALLOY 625 1 Connecting part:1.4404/316L-SS
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.0718 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
Valve Application 52 Spring - - not applicable
Description Valve Data 53 Spring - - not applicable
Article No. 5263.5012 54 Spring 2.4669 - ALLOY X750 1
Product Group API 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Valve Type Bellows Design 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Bonnet type Vented Bonnet 60 Gasket Graphit/1.4401 - SS 3
Orifice D 73 Lock screw 1.4404/316L - SS 1
d0 14.0 mm 0.551 "
Set Pressure 13.80 bar-g
Cold Diff Test Pressure (cdtp) 13.80 bar-g
Inlet Connection NPS 1"
CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 2"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 16.6 kg
a 105 mm
b 114 mm
H 447 mm
s1 30 mm 00 Issue for approval SAP 19.04.2019
s2 20 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 130


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
BELLOWS
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413180-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASDCA-PSV-570001 ASDCA-PSV-570001 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.0718 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5002 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice D
d0 14.0 mm 0.551 "
Set Pressure 10.00 bar-g
Cold Diff Test Pressure (cdtp) 9.80 bar-g
Inlet Connection NPS 1"
CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 2"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 15.5 kg
a 105 mm
b 114 mm
H 423 mm
s1 32 mm 00 Issue for approval SAP 19.04.2019
s2 20 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 140


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413181-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASDCA-PSV-570202 ASDCA-PSV-570202 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.0718 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5052 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice E
d0 14.0 mm 0.551 "
Set Pressure 10.00 bar-g
Cold Diff Test Pressure (cdtp) 9.80 bar-g
Inlet Connection NPS 1"
CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 2"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 15.6 kg
a 105 mm
b 114 mm
H 423 mm
s1 32 mm 00 Issue for approval SAP 19.04.2019
s2 20 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 150


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413182-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASDCA-PSV-350034 ASDCA-PSV-350034 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.0718 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5032 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice D
d0 14.0 mm 0.551 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 139.50 bar-g
Inlet Connection NPS 1 1/2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 2"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 29.3 kg
a 105 mm
b 140 mm
H 500 mm
s1 44 mm 00 Issue for approval SAP 19.04.2019
s2 22 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 160


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413183-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASEGA-PSV-330019 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5212 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice G
d0 22.5 mm 0.886 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 133.90 bar-g
Inlet Connection NPS 2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 3"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 59.5 kg
a 156 mm
b 172 mm
H 645 mm
s1 68 mm 00 Issue for approval SAP 19.04.2019
s2 29 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 170


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413184-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASEGA-PSV-330020 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5212 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice G
d0 22.5 mm 0.886 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 133.90 bar-g
Inlet Connection NPS 2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 3"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 59.5 kg
a 156 mm
b 172 mm
H 645 mm
s1 68 mm 00 Issue for approval SAP 19.04.2019
s2 29 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 180


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413185-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASEGA-PSV-330024 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5212 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice G
d0 22.5 mm 0.886 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 133.90 bar-g
Inlet Connection NPS 2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 3"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 59.5 kg
a 156 mm
b 172 mm
H 645 mm
s1 68 mm 00 Issue for approval SAP 19.04.2019
s2 29 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 190


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413186-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASEGA-PSV-330025 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5212 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice G
d0 22.5 mm 0.886 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 133.90 bar-g
Inlet Connection NPS 2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 3"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 59.5 kg
a 156 mm
b 172 mm
H 645 mm
s1 68 mm 00 Issue for approval SAP 19.04.2019
s2 29 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 200


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413187-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASEGA-PSV-340207 ASEGA-PSV-340207 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited + welded
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
11 Spacer 1.4408/SA-351 CF8M - SS 1
12 Spindle 1.4404/316L - SS 1
15 Bellows - 1
16 Spring plate 1.0460/SA-105 - CS 1
17 Spring plate 1.0460/SA-105 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 0.7040/60-40-18 - Cast Iron 1
Valve Application 52 Spring 2.4669 - ALLOY X750 1 not applicable
Description Valve Data 53 Spring - - not applicable
Article No. 5263.5602 54 Spring 2.4669 - ALLOY X750 1
Product Group API 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 12
Valve Type Conventional Design 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 12
Bonnet type Bonnet closed 60 Gasket Graphit/1.4401 - SS 1
Orifice Q 64 Bug screen 1.4305 + 1.4436 - SS 1
d0 105.5 mm 4.154 " 73 Lock screw 1.4404/316L - SS 1
Set Pressure 13.80 bar-g
Cold Diff Test Pressure (cdtp) 12.45 bar-g
Inlet Connection NPS 6"
CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 8"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 226.3 kg
a 240 mm
b 241 mm
H 1,056 mm
s1 68 mm 00 Issue for approval SAP 25.04.2019
s2 31 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 210


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413188-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASEGA-PSV-350003 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring 2.4669 - ALLOY X750 1
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5282 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice H
d0 28.3 mm 1.114 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 133.90 bar-g
Inlet Connection NPS 2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 3"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 65.9 kg
a 154 mm
b 162 mm
H 642 mm
s1 56 mm 00 Issue for approval SAP 19.04.2019
s2 29 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 220


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413189-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASEGA-PSV-350004 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring 2.4669 - ALLOY X750 1
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5282 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice H
d0 28.3 mm 1.114 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 133.90 bar-g
Inlet Connection NPS 2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 3"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 65.9 kg
a 154 mm
b 162 mm
H 642 mm
s1 56 mm 00 Issue for approval SAP 19.04.2019
s2 29 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 230


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413190-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASEGA-PSV-350010 ASEGA-PSV-350010 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4462/S31803 - DUPLEX SS 1
7 Disc 1.4462/S31803 - DUPLEX SS 1
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring 2.4669 - ALLOY X750 1
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5032 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice D
d0 14.0 mm 0.551 "
Set Pressure 228.00 bar-g
Cold Diff Test Pressure (cdtp) 227.80 bar-g
Inlet Connection NPS 1 1/2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 2"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 29.9 kg
a 105 mm
b 140 mm
H 500 mm
s1 44 mm 00 Issue for approval SAP 19.04.2019
s2 22 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 240


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413191-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASEGA-PSV-570001 ASEGA-PSV-570001 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.0718 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5002 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice D
d0 14.0 mm 0.551 "
Set Pressure 10.00 bar-g
Cold Diff Test Pressure (cdtp) 9.80 bar-g
Inlet Connection NPS 1"
CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 2"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 15.5 kg
a 105 mm
b 114 mm
H 423 mm
s1 32 mm 00 Issue for approval SAP 19.04.2019
s2 20 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 250


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413192-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASEGA-PSV-570202 ASEGA-PSV-570202 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.0718 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5052 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice E
d0 14.0 mm 0.551 "
Set Pressure 10.00 bar-g
Cold Diff Test Pressure (cdtp) 9.80 bar-g
Inlet Connection NPS 1"
CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 2"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 15.6 kg
a 105 mm
b 114 mm
H 423 mm
s1 32 mm 00 Issue for approval SAP 19.04.2019
s2 20 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 260


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413193-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASEGA-PSV-350050 ASEGA-PSV-350050 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.0718 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5032 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice D
d0 14.0 mm 0.551 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 139.50 bar-g
Inlet Connection NPS 1 1/2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 2"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 29.3 kg
a 105 mm
b 140 mm
H 500 mm
s1 44 mm 00 Issue for approval SAP 19.04.2019
s2 22 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 270


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413194-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASEGA-PSV-340030 ASEGA-PSV-340030 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.0718 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5002 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice D
d0 14.0 mm 0.551 "
Set Pressure 13.80 bar-g
Cold Diff Test Pressure (cdtp) 13.60 bar-g
Inlet Connection NPS 1"
CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 2"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 15.5 kg
a 105 mm
b 114 mm
H 423 mm
s1 32 mm 00 Issue for approval SAP 19.04.2019
s2 20 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 280


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413195-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASFCA-PSV-330019 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5212 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice G
d0 22.5 mm 0.886 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 136.80 bar-g
Inlet Connection NPS 2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 3"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 59.5 kg
a 156 mm
b 172 mm
H 645 mm
s1 68 mm 00 Issue for approval SAP 19.04.2019
s2 29 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 290


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413196-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASFCA-PSV-330020 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5212 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice G
d0 22.5 mm 0.886 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 136.80 bar-g
Inlet Connection NPS 2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 3"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 59.5 kg
a 156 mm
b 172 mm
H 645 mm
s1 68 mm 00 Issue for approval SAP 19.04.2019
s2 29 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 300


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413197-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASFCA-PSV-330024 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5212 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice G
d0 22.5 mm 0.886 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 136.80 bar-g
Inlet Connection NPS 2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 3"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 59.5 kg
a 156 mm
b 172 mm
H 645 mm
s1 68 mm 00 Issue for approval SAP 19.04.2019
s2 29 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 310


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413198-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASFCA-PSV-330025 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5212 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice G
d0 22.5 mm 0.886 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 136.80 bar-g
Inlet Connection NPS 2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 3"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 59.5 kg
a 156 mm
b 172 mm
H 645 mm
s1 68 mm 00 Issue for approval SAP 19.04.2019
s2 29 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 320


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413199-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASFCA-PSV-340207 ASFCA-PSV-340207 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited + welded
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
11 Spacer 1.4408/SA-351 CF8M - SS 1
12 Spindle 1.4404/316L - SS 1
15 Bellows - 1
16 Spring plate 1.0460/SA-105 - CS 1
17 Spring plate 1.0460/SA-105 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 0.7040/60-40-18 - Cast Iron 1
Valve Application 52 Spring - - not applicable
Description Valve Data 53 Spring 2.4669 - ALLOY X750 1
Article No. 5263.5602 54 Spring 2.4669 - ALLOY X750 1
Product Group API 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 12
Valve Type Conventional Design 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 12
Bonnet type Bonnet closed 60 Gasket Graphit/1.4401 - SS 1
Orifice Q 64 Bug screen 1.4305 + 1.4436 - SS 1
d0 105.5 mm 4.154 " 73 Lock screw 1.4404/316L - SS 1
Set Pressure 17.00 bar-g
Cold Diff Test Pressure (cdtp) 15.76 bar-g
Inlet Connection NPS 6"
CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 8"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 230.4 kg
a 240 mm
b 241 mm
H 1,056 mm
s1 68 mm 00 Issue for approval SAP 25.04.2019
s2 31 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 330


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413200-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASFCA-PSV-350003 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4122 - SS 1 Hardened
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4021 - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring 2.4669 - ALLOY X750 1
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5282 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice H
d0 28.3 mm 1.114 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 136.80 bar-g
Inlet Connection NPS 2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 3"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 66.1 kg
a 154 mm
b 162 mm
H 642 mm
s1 56 mm 00 Issue for approval SAP 19.04.2019
s2 29 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 340


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413201-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASFCA-PSV-350004 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4122 - SS 1 Hardened
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4021 - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring 2.4669 - ALLOY X750 1
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5282 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice H
d0 28.3 mm 1.114 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 136.80 bar-g
Inlet Connection NPS 2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 3"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 66.1 kg
a 154 mm
b 162 mm
H 642 mm
s1 56 mm 00 Issue for approval SAP 19.04.2019
s2 29 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 350


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413202-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASFCA-PSV-350010 ASFCA-PSV-350010 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4462/S31803 - DUPLEX SS 1
7 Disc 1.4462/S31803 - DUPLEX SS 1
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.4404/316L - SS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring 2.4669 - ALLOY X750 1
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5032 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice D
d0 14.0 mm 0.551 "
Set Pressure 228.00 bar-g
Cold Diff Test Pressure (cdtp) 227.80 bar-g
Inlet Connection NPS 1 1/2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 2"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 29.9 kg
a 105 mm
b 140 mm
H 500 mm
s1 44 mm 00 Issue for approval SAP 19.04.2019
s2 22 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 360


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413203-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASFCA-PSV-290127 ASFCA-PSV-290127 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.0718 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5032 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice D
d0 14.0 mm 0.551 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 136.80 bar-g
Inlet Connection NPS 1 1/2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 2"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 29.3 kg
a 105 mm
b 140 mm
H 500 mm
s1 44 mm 00 Issue for approval SAP 19.04.2019
s2 22 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 370


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413204-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASFCA-PSV-291127 ASFCA-PSV-291127 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.0718 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5032 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice D
d0 14.0 mm 0.551 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 136.80 bar-g
Inlet Connection NPS 1 1/2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 2"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 29.3 kg
a 105 mm
b 140 mm
H 500 mm
s1 44 mm 00 Issue for approval SAP 19.04.2019
s2 22 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 380


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413205-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASFCA-PSV-380107 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.0718 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5032 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice D
d0 14.0 mm 0.551 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 139.50 bar-g
Inlet Connection NPS 1 1/2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 2"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 29.3 kg
a 105 mm
b 140 mm
H 500 mm
s1 44 mm 00 Issue for approval SAP 19.04.2019
s2 22 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 390


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413206-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASFCA-PSV-570001 ASFCA-PSV-570001 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4021 - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.0718 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5002 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice D
d0 14.0 mm 0.551 "
Set Pressure 10.00 bar-g
Cold Diff Test Pressure (cdtp) 9.80 bar-g
Inlet Connection NPS 1"
CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 2"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 15.5 kg
a 105 mm
b 114 mm
H 423 mm
s1 32 mm 00 Issue for approval SAP 19.04.2019
s2 20 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 400


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413207-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASFCA-PSV-570202 ASFCA-PSV-570202 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.0718 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5052 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice E
d0 14.0 mm 0.551 "
Set Pressure 10.00 bar-g
Cold Diff Test Pressure (cdtp) 9.80 bar-g
Inlet Connection NPS 1"
CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 2"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 15.6 kg
a 105 mm
b 114 mm
H 423 mm
s1 32 mm 00 Issue for approval SAP 19.04.2019
s2 20 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 410


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413208-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASFCA-PSV-350034 ASFCA-PSV-350034 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1 stellited
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.0718 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5032 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice D
d0 14.0 mm 0.551 "
Set Pressure 139.50 bar-g
Cold Diff Test Pressure (cdtp) 139.50 bar-g
Inlet Connection NPS 1 1/2"
CL 1500 ASME B16.5
RTJ - Ring Joint Facing B16.5

Outlet Connection NPS 2"


CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 29.3 kg
a 105 mm
b 140 mm
H 500 mm
s1 44 mm 00 Issue for approval SAP 19.04.2019
s2 22 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 420


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413209-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASDCA-PSV-501108 1 Angular body SA 995 Gr. 6A / CD3MWCuN 1
5 Nozzle SA 479 S32760 / DIN 1.4501 1
7 Disc SA 479 S32760 / DIN 1.4501 1
8 Guide SA 479 S32760 / DIN 1.4501 1
9 Bonnet SA 995 Gr. 6A / CD3MWCuN 1
12 Spindle SA 479 S32760 / DIN 1.4501 1
16 Spring plate SA 479 S32760 / DIN 1.4501 1
17 Spring plate SA 479 S32760 / DIN 1.4501 1
18 Adjusting screw SA 479 S32760 / DIN 1.4501 1
40 Cap/ Lifting device SA 479 S32760 / DIN 1.4501 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.4401/ A4-70/ SA-193+320 B8M - SS 4 w/ Xylar + Xylan Coating
Article No. 5264.0392 56 Nut 1.4401/ A4-70/ SA-194 8M - SS 4 w/ Xylar + Xylan Coating
Product Group API 60 Gasket Gylon (PTFE) 1
Valve Type Conventional Design 73 Lock screw SA 479 S32760 / DIN 1.4501 1
Bonnet type Bonnet closed
Orifice F
d0 18.0 mm 0.709 "
Set Pressure 17.70 bar-g
Cold Diff Test Pressure (cdtp) 17.70 bar-g
Inlet Connection NPS 1 1/2"
CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 2"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 27.8 kg
a 124 mm
b 121 mm
H 519 mm
s1 35 mm 00 Issue for approval SAP 25.04.2019
s2 23 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 430


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413901-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASDCA-PSV-502108 1 Angular body SA 995 Gr. 6A / CD3MWCuN 1
5 Nozzle SA 479 S32760 / DIN 1.4501 1
7 Disc SA 479 S32760 / DIN 1.4501 1
8 Guide SA 479 S32760 / DIN 1.4501 1
9 Bonnet SA 995 Gr. 6A / CD3MWCuN 1
12 Spindle SA 479 S32760 / DIN 1.4501 1
16 Spring plate SA 479 S32760 / DIN 1.4501 1
17 Spring plate SA 479 S32760 / DIN 1.4501 1
18 Adjusting screw SA 479 S32760 / DIN 1.4501 1
40 Cap/ Lifting device SA 479 S32760 / DIN 1.4501 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.4401/ A4-70/ SA-193+320 B8M - SS 4 w/ Xylar + Xylan Coating
Article No. 5264.0392 56 Nut 1.4401/ A4-70/ SA-194 8M - SS 4 w/ Xylar + Xylan Coating
Product Group API 60 Gasket Gylon (PTFE) 1
Valve Type Conventional Design 73 Lock screw SA 479 S32760 / DIN 1.4501 1
Bonnet type Bonnet closed
Orifice F
d0 18.0 mm 0.709 "
Set Pressure 17.70 bar-g
Cold Diff Test Pressure (cdtp) 17.70 bar-g
Inlet Connection NPS 1 1/2"
CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 2"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 27.8 kg
a 124 mm
b 121 mm
H 519 mm
s1 35 mm 00 Issue for approval SAP 25.04.2019
s2 23 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 440


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413901-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASEGA-PSV-501108 1 Angular body SA 995 Gr. 6A / CD3MWCuN 1
5 Nozzle SA 479 S32760 / DIN 1.4501 1
7 Disc SA 479 S32760 / DIN 1.4501 1
8 Guide SA 479 S32760 / DIN 1.4501 1
9 Bonnet SA 995 Gr. 6A / CD3MWCuN 1
12 Spindle SA 479 S32760 / DIN 1.4501 1
16 Spring plate SA 479 S32760 / DIN 1.4501 1
17 Spring plate SA 479 S32760 / DIN 1.4501 1
18 Adjusting screw SA 479 S32760 / DIN 1.4501 1
40 Cap/ Lifting device SA 479 S32760 / DIN 1.4501 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.4401/ A4-70/ SA-193+320 B8M - SS 4 w/ Xylar + Xylan Coating
Article No. 5264.0392 56 Nut 1.4401/ A4-70/ SA-194 8M - SS 4 w/ Xylar + Xylan Coating
Product Group API 60 Gasket Gylon (PTFE) 1
Valve Type Conventional Design 73 Lock screw SA 479 S32760 / DIN 1.4501 1
Bonnet type Bonnet closed
Orifice F
d0 18.0 mm 0.709 "
Set Pressure 17.70 bar-g
Cold Diff Test Pressure (cdtp) 17.70 bar-g
Inlet Connection NPS 1 1/2"
CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 2"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 27.8 kg
a 124 mm
b 121 mm
H 519 mm
s1 35 mm 00 Issue for approval SAP 25.04.2019
s2 23 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 450


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413901-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASEGA-PSV-502108 1 Angular body SA 995 Gr. 6A / CD3MWCuN 1
5 Nozzle SA 479 S32760 / DIN 1.4501 1
7 Disc SA 479 S32760 / DIN 1.4501 1
8 Guide SA 479 S32760 / DIN 1.4501 1
9 Bonnet SA 995 Gr. 6A / CD3MWCuN 1
12 Spindle SA 479 S32760 / DIN 1.4501 1
16 Spring plate SA 479 S32760 / DIN 1.4501 1
17 Spring plate SA 479 S32760 / DIN 1.4501 1
18 Adjusting screw SA 479 S32760 / DIN 1.4501 1
40 Cap/ Lifting device SA 479 S32760 / DIN 1.4501 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.4401/ A4-70/ SA-193+320 B8M - SS 4 w/ Xylar + Xylan Coating
Article No. 5264.0392 56 Nut 1.4401/ A4-70/ SA-194 8M - SS 4 w/ Xylar + Xylan Coating
Product Group API 60 Gasket Gylon (PTFE) 1
Valve Type Conventional Design 73 Lock screw SA 479 S32760 / DIN 1.4501 1
Bonnet type Bonnet closed
Orifice F
d0 18.0 mm 0.709 "
Set Pressure 17.70 bar-g
Cold Diff Test Pressure (cdtp) 17.70 bar-g
Inlet Connection NPS 1 1/2"
CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 2"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 27.8 kg
a 124 mm
b 121 mm
H 519 mm
s1 35 mm 00 Issue for approval SAP 25.04.2019
s2 23 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 460


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413901-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASFCA-PSV-340030 ASFCA-PSV-340030 1 Angular body 1.0619/SA-352 LCB/LCC - CS 1
5 Nozzle 1.4404/316L - SS 1
7 Disc 1.4404/316L - SS 1 stellited
8 Guide 1.4404/316L - SS 1
9 Bonnet 1.0619/SA-352 LCB/LCC - CS 1
12 Spindle 1.4404/316L - SS 1
16 Spring plate 1.4404/316L - SS 1
17 Spring plate 1.0718 - CS 1
18 Adjusting screw 1.4104 - SS 1
40 Cap/ Lifting device 1.0460/SA-105 - CS 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.7225/ SA-193 B7/ SA-320 L7 - CS 4
Article No. 5263.5002 56 Nut 1.7225/SA-194 Gr.7/SA-320 7L 4
Product Group API 60 Gasket Graphit/1.4401 - SS 1
Valve Type Conventional Design 73 Lock screw 1.4404/316L - SS 1
Bonnet type Bonnet closed
Orifice D
d0 14.0 mm 0.551 "
Set Pressure 17.00 bar-g
Cold Diff Test Pressure (cdtp) 16.80 bar-g
Inlet Connection NPS 1"
CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 2"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 15.6 kg
a 105 mm
b 114 mm
H 423 mm
s1 32 mm 00 Issue for approval SAP 19.04.2019
s2 20 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 470


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413214-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASFCA-PSV-501108 1 Angular body SA 995 Gr. 6A / CD3MWCuN 1
5 Nozzle SA 479 S32760 / DIN 1.4501 1
7 Disc SA 479 S32760 / DIN 1.4501 1
8 Guide SA 479 S32760 / DIN 1.4501 1
9 Bonnet SA 995 Gr. 6A / CD3MWCuN 1
12 Spindle SA 479 S32760 / DIN 1.4501 1
16 Spring plate SA 479 S32760 / DIN 1.4501 1
17 Spring plate SA 479 S32760 / DIN 1.4501 1
18 Adjusting screw SA 479 S32760 / DIN 1.4501 1
40 Cap/ Lifting device SA 479 S32760 / DIN 1.4501 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.4401/ A4-70/ SA-193+320 B8M - SS 4 w/ Xylar + Xylan Coating
Article No. 5264.0392 56 Nut 1.4401/ A4-70/ SA-194 8M - SS 4 w/ Xylar + Xylan Coating
Product Group API 60 Gasket Gylon (PTFE) 1
Valve Type Conventional Design 73 Lock screw SA 479 S32760 / DIN 1.4501 1
Bonnet type Bonnet closed
Orifice F
d0 18.0 mm 0.709 "
Set Pressure 17.70 bar-g
Cold Diff Test Pressure (cdtp) 17.70 bar-g
Inlet Connection NPS 1 1/2"
CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 2"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 27.8 kg
a 124 mm
b 121 mm
H 519 mm
s1 35 mm 00 Issue for approval SAP 25.04.2019
s2 23 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 480


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413901-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASFCA-PSV-502108 1 Angular body SA 995 Gr. 6A / CD3MWCuN 1
5 Nozzle SA 479 S32760 / DIN 1.4501 1
7 Disc SA 479 S32760 / DIN 1.4501 1
8 Guide SA 479 S32760 / DIN 1.4501 1
9 Bonnet SA 995 Gr. 6A / CD3MWCuN 1
12 Spindle SA 479 S32760 / DIN 1.4501 1
16 Spring plate SA 479 S32760 / DIN 1.4501 1
17 Spring plate SA 479 S32760 / DIN 1.4501 1
18 Adjusting screw SA 479 S32760 / DIN 1.4501 1
40 Cap/ Lifting device SA 479 S32760 / DIN 1.4501 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.4401/ A4-70/ SA-193+320 B8M - SS 4 w/ Xylar + Xylan Coating
Article No. 5264.0392 56 Nut 1.4401/ A4-70/ SA-194 8M - SS 4 w/ Xylar + Xylan Coating
Product Group API 60 Gasket Gylon (PTFE) 1
Valve Type Conventional Design 73 Lock screw SA 479 S32760 / DIN 1.4501 1
Bonnet type Bonnet closed
Orifice F
d0 18.0 mm 0.709 "
Set Pressure 17.70 bar-g
Cold Diff Test Pressure (cdtp) 17.70 bar-g
Inlet Connection NPS 1 1/2"
CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 2"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 27.8 kg
a 124 mm
b 121 mm
H 519 mm
s1 35 mm 00 Issue for approval SAP 25.04.2019
s2 23 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 490


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413901-00
Sectional Drawing Tag Numbers Bill of Material
Pos. Description Material Grade Qty. Remarks
Tag-No. 1 + 2 ASDCA-PSV-275104 1 Angular body ASME SA-494 (M35-1) 1
5 Nozzle ASME SB-164 / UNS N04400 1
7 Disc ASME SB-164 / UNS N04400 1
8 Guide ASME SB-164 / UNS N04400 1
9 Bonnet ASME SA-494 (M35-1) 1
12 Spindle ASME SB-164 / UNS N04400 1
16 Spring plate ASME SB-164 / UNS N04400 1
17 Spring plate ASME SB-164 / UNS N04400 1
18 Adjusting screw ASME SB-164 / UNS N04400 1
40 Cap/ Lifting device ASME SB-164 / UNS N04400 1
52 Spring - - not applicable
53 Spring - - not applicable
Valve Application 54 Spring 2.4669 - ALLOY X750 1
Description Valve Data 55 Stud 1.4401/ A4-70/ SA-193+320 B8M - SS 4 w/ Xylar + Xylan Coating
Article No. 5264.1542 56 Nut 1.4401/ A4-70/ SA-194 8M - SS 4 w/ Xylar + Xylan Coating
Product Group API 60 Gasket Gylon (PTFE) 1
Valve Type Conventional Design 73 Lock screw ASME SB-164 / UNS N04400 1
Bonnet type Bonnet closed
Orifice H
d0 28.3 mm 1.114 "
Set Pressure 25.00 bar-g
Cold Diff Test Pressure (cdtp) 24.74 bar-g
Inlet Connection NPS 2"
CL 300 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Outlet Connection NPS 3"


CL 150 ASME B16.5
RF - SerSpiral fin, Ra=3.2-6.3

Dimensions & Weight Rev. Status Editor Releaser Date


Descriptions Values
Weight 41.9 kg
a 130 mm
b 124 mm
H 618 mm
s1 43 mm 00 Issue for approval SAP 25.04.2019
s2 25 mm

LESER GmbH & Co. KG, Germany

Further Data LESER Job-No. / item 10262833 / 500


Ref. Job-No. / item
Client PO-No. WHP01-PMC1-ASYYY-08-562008-0001
Client Nhan Viet ICS JSC
Project Title

Unit
Drawing Title GENERAL ARRANGEMENT DRAWING Sheet
CONVENTIONAL
LESER General Arrangement Drawing (GAD) - initial submission acc. LESER-Standard LGS 3012: Image is a scaled model of the actual valve.
1/1
This document is done automatically and is valid without signature.
SAFETY RELIEF VALVE
LESER GAD-No. Client DWG-No. Client Rev.
10000413903-00

You might also like