0% found this document useful (0 votes)
50 views3 pages

Develop A Multiple Interface Based Fire Fighting Robot (Abstract)

This document describes the development of a firefighting robot with multiple interfaces. The robot uses sensors to detect fires and extinguishes them using a blower or LED. It is designed to autonomously detect and put out fires to save lives and property. The robot moves through a model structure to find and extinguish a candle, simulating real-world firefighting. An ARM7 microcontroller processes sensor data to control the motors and blower when a fire is detected.

Uploaded by

Shirisha N
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
50 views3 pages

Develop A Multiple Interface Based Fire Fighting Robot (Abstract)

This document describes the development of a firefighting robot with multiple interfaces. The robot uses sensors to detect fires and extinguishes them using a blower or LED. It is designed to autonomously detect and put out fires to save lives and property. The robot moves through a model structure to find and extinguish a candle, simulating real-world firefighting. An ARM7 microcontroller processes sensor data to control the motors and blower when a fire is detected.

Uploaded by

Shirisha N
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Develop A Multiple Interface Based Fire Fighting Robot

(Abstract)

The security of home, laboratory, office, factory and


building is important to human life. We develop an intelligent
multi sensor based security system that contains a fire
fighting robot in our daily life.

The need for a device that can detect and extinguish a


fire on its own is long past due. Many house fires originate
when someone is either sleeping or not home. With the
invention of such a device, people and property can be saved
at a much higher rate with relatively minimal damage caused
by the fire. Our task as electrical engineers was to design and
build a prototype system that could autonomously detect and
extinguish a fire. Also aims at minimizing air pollution.

In this Project we are using the fire sensor to detect the


fire .when ever fire is occurred then the Robot will go to that
particular area and the blower or LED will on otherwise the
blower or LED is in the off state. It is the Robot that can move
through a model structure, find a “burning oil derrick” (lit
candle) and then extinguish it with help of a Blower. This is
meant to simulate the real world operation of a Robot
performing a fire extinguishing function in an oilfield.
In this project we are going to use the ARM7 based
microcontroller LPC2148 for storing and processing of the
data.
SOFTWARE: Embedded ‘C’ language
TOOLS: Keil, Flash magic.
TARGET DEVICE: LPC2148(ARM7) microcontroller.
APPLICATIONS: industries, chemical laboratories, homes.
ADVANTAGES: Low cost, safe way without loss of human life
REFERENCE: The 8051 micro controller and embedded
systems by Mazidi and LPC2148 datasheet and user manual.
BLOCK DIAGRAM:

FIRE
SENSOR BLOWER/FAN/
LED

TEMPERATURE
SENSOR LPC2148(ARM7)
MICROCONTROLLER
MOTOR1
MOTOR
DRIVER
MOTOR2
REGULATED
POWER
SUPPLY

RF
Receiver

RF
REMOTE

You might also like