0% found this document useful (0 votes)
772 views2 pages

Electrical Specification: Daewoo Continuous Wave Magnetron 2M218J

This document provides specifications for the Daewoo continuous wave magnetron model 2M218J, including: - Dimensions and electrical ratings for the magnetron, which is intended for use in microwave ovens operating at 2450MHz. - Test procedures and limits based on testing standards for continuous wave magnetrons. Key parameters that will be tested include breakdown voltage, insulation, filament current, peak anode voltage, average power output, frequency, pulling figure, and stability during modulation. - Reliability requirements including a minimum life test duration of 500 hours during which the average power output must remain above 710W.

Uploaded by

Behnam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
772 views2 pages

Electrical Specification: Daewoo Continuous Wave Magnetron 2M218J

This document provides specifications for the Daewoo continuous wave magnetron model 2M218J, including: - Dimensions and electrical ratings for the magnetron, which is intended for use in microwave ovens operating at 2450MHz. - Test procedures and limits based on testing standards for continuous wave magnetrons. Key parameters that will be tested include breakdown voltage, insulation, filament current, peak anode voltage, average power output, frequency, pulling figure, and stability during modulation. - Reliability requirements including a minimum life test duration of 500 hours during which the average power output must remain above 710W.

Uploaded by

Behnam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

2M218J ELECTRICAL SPECIFICATION

This specification is based upon EIAJ ED-1501 Testing Methods for Continuous Wave Magnetrons

DAEWOO CONTINUOUS WAVE MAGNETRON 2M218J


DESCRIPTION Magnetron (Fixed Frequency, Integral Magnet)

FUNCTION For Microwave Oven (2450MHz Band continuous wave oscillation)

OUTER DIMENSIONS See Outline drawing

NOTE(4)(5) NOTE(4)

TERM Ef tk Ebm Ib Ibm Pin σL Tp T case


ABSOULUTE
UNIT V sec kV mAdc A kW - ℃ ℃
MAXIMUM RATINGS
MAX. 3.75 - 4.5 350 1.2 1.4 4 300 100

MIN. 2.80 0 - - - - - - -

STANDARD TEST NOTE


CONDITION (1)(2)(3) 3.30 - - 300 - - 1.1MAX - -

TEST SPECIFICATION
LIMIT
TEST
TEST TERM METHOD TEST CONDITION SYMBOL BOGIE UNIT
EIAJ ED-1501 MIN. MAX.
NOTE (8)

** VIBRATION 5.4.1 - - - - -

* BREAK DOWN VOLTAGE 4.2 NOTE (6) - - - - -

Eb=1kVdc
* INSULATION 4.2
R.H.MAX.60%
- - 100 - MΩ

* FILAMENT CURRENT 4.1.1 tk=120sec If 10 8 12 A

PEAK ANODE VOLTAGE 4.3.1 NOTE (7) Ebm 4.10 3.95 4.25 kV

AVERAGE POWER OUTPUT (1) 4.3.3.1 NOTE (7) Po (1) 925 885 965 W

FREQUENCY 4.3.4 f 2458 2448 2468 MHz

** PULLING FIGURE 4.3.6 σL = 1.5 fpl - - 15 MHz

** SINK PHASE 4.3.7 λsink/λg 0.25 - - -

* STABILITY MODING (1) 4.3.11.2 σL = 2,3,4; t = 60sec - - - - -

* FUNDAMENTAL 4.3.15 σL = 4 S1 - - 1 mW/㎠


FREQUENCY RADIATION

** LIFE TEST 4.5.1 t - 500 - hour

AVERAGE
** LIFE TEST POWER 4.3.3.1 NOTE (7) Po (1) - 710 - W
END POINT OUTPUT (1)

SPEC. NO. : DATE : PAGE : 2 / 10

You might also like