Scribd
Upload
351 views

Services Configuration For 610

This document provides configuration steps for VPWS, VPLS, and E1 services on a 610 device for an India CPAN scene. It includes steps for configuring tunnels, pseudowires, and services. The topology diagrams show connections from GE1 ports on two 610 devices for VPWS, connections from a root to leaves for VPLS E-Tree service, and an E1 connection between two devices.

Uploaded by

Niyas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
351 views

Services Configuration For 610

This document provides configuration steps for VPWS, VPLS, and E1 services on a 610 device for an India CPAN scene. It includes steps for configuring tunnels, pseudowires, and services. The topology diagrams show connections from GE1 ports on two 610 devices for VPWS, connections from a root to leaves for VPLS E-Tree service, and an E1 connection between two devices.

Uploaded by

Niyas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 18

Services Configuration Steps for 610

This document is available for India CPAN scenes only

Dong Hao
[email protected]
Fiberhome India Private Limited

The topology is shown as below:


Content

Services configuration for 610 .......................................................................................................... 1


1. VPWS ..................................................................................................................................... 3
1.1 Tunnel .......................................................................................................................... 3
1.2 PW configuration......................................................................................................... 7
1.3 Service configuration................................................................................................... 8
1.4 Delivery services from Tunnel->L2VPN ..................................................................... 10
2. VPLS ..................................................................................................................................... 11
2.1 Tunnel and PW configuration .................................................................................... 11
2.2 E-tree Configuration .................................................................................................. 12
3. E1 service ............................................................................................................................ 14
3.1 Tunnel configuration ................................................................................................. 15
3.2 PW configuration....................................................................................................... 16
3.3 CES service configuration .......................................................................................... 17
3.4 Delivery service ......................................................................................................... 18
1. VPWS

The service is from GE1 of 610-1 to GE1 of 610-2

1.1 Tunnel

Giving protection.
Remember to change the GE1 port of 610-1 and 610-2 from NNI to UNI.
Distributing the label to tunnel.

Click NEXT till Finish.


1.2 PW configuration

Right click on the Tunnel

Click NEXT till Finish.


1.3 Service configuration

Right click on the PW.

Choose the E-Line configuration.


Click NEXT till Finish.
1.4 Delivery services
2. VPLS

In VPLS configuration, We usually configure the E-tree services


The service topology is shown as below:

2.1 Tunnel and PW configuration

Tunnel and PW configuration are same as the VPWS configuration.


Every Root point to Every leaf point should be bounding with one tunnel and pw. So in this
service, two tunnel and two PW should be configured.
2.2 E-tree Configuration

Service Type should be E-tree


The Root point should be in the first Row.

Click NEXT till Finish


2.3 Delivery service
Deliver service from Tunnel to L2VPN.

3. E1 service

The service topology is shown as below:


3.1 Tunnel configuration

Both side of tunnel should be E1


Click NEXT till Finish

3.2 PW configuration

PW configuration is the same as VPWS and VPLS.


3.3 CES service configuration

Choose E1/1 on the both side.


Click NEXT till Finish

3.4 Delivery service

Delivery service from Tunnel to CES service.

You might also like