Scribd
Upload
325 views2 pages

Indes Enginnering: Design Code - IS800:2007

This document provides the weld design calculations for connecting a beam to a column or another beam's flange. It specifies member forces, material properties, and member details. It then calculates weld sizes and stresses for flange and web welds to ensure stresses are below allowable limits according to design code IS800:2007. Both the flange weld and web weld are found to satisfy requirements with ratios of weld stress to allowable weld strength below 1.0.

Uploaded by

KARTHIK SG
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
325 views2 pages

Indes Enginnering: Design Code - IS800:2007

This document provides the weld design calculations for connecting a beam to a column or another beam's flange. It specifies member forces, material properties, and member details. It then calculates weld sizes and stresses for flange and web welds to ensure stresses are below allowable limits according to design code IS800:2007. Both the flange weld and web weld are found to satisfy requirements with ratios of weld stress to allowable weld strength below 1.0.

Uploaded by

KARTHIK SG
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

INDES ENGINNERING

Designed by Date
PROJECT ITC ONE-SKY BRIDGE MANOJ MS 13/08/2018
Checked by Revision
CONNECTION ID I-WC-H-P-13 MAK 0

Weld Design for Beam Connecting to Column / Beam Flange Page 1/1

Factored Member End Forces Note:Input Cell


Design3 Code - IS800:2007
Grade of Material E350
Ultimate Strength Of Material 490
Yeild Strength Of Material 350
Tension T = 660 kN
Compression C = 0 kN
Vertical shear Fy = 2 kN
Horizontal shear Fz = 0 kN
Major Moment Mz = 2 kNm Component Utility Ratio
Minor Moment My = 0 kNm
Flange Weld 0.83
Member Details UB 356X171X57
Depth D = 358.0 mm Web Weld 0.51
Width B = 172.2 mm
Flange thickness T = 13.0 mm
Web thickness t = 8.1 mm
Root radius r = 10.2 mm Flanges Only
Area A = 7260.0 mm² Flanges & Web
Depth b/t root radius d = 311.6 mm
Type of Weld For Flange = FW
Type of Weld For Web = FW
Weld strength For Flange Fexx = 188.6 N/mm²
Weld strength For Web Fexx = 188.6 N/mm²
Welding Safety Factor = 1.5 (Site Weld)
Beam Axial Force is Assumed to be CarrieFlange And Web

Weld between beam flange to support


To provide weld size sw = 10.0 mm
Axial force to be considered P = max (T,C)
= 660.00 kN
Force/flange due to P f1 = B*T*P/A
= 203.51 kN
Force/flange due to Fz f2 = Fz/2
= 0.00 kN
Force/flange due to Mz f3 = Mz/(D-T)
= 6 kN
Length of flange weld lw = 2B - t - 2r
= 152.2 mm
Weld stress due to P F1 = f1/0.707sw*lw Weld ZyFW= 4*0.707sw*B²/6 - 2*0.707sw*(t+2r)²/6
= 189.13 N/mm² = 137850 mm³/mm
Weld stress due to Vz F2 = f2/0.707sw*lw
= 0.00 N/mm² Weld Zyfp = 4*sw*B²/6 - 2*sw*(t+2r)²/6
Weld stress due to Mz F3 = f3/0.707sw*lw = 194978 mm³/mm
= 5.39 N/mm²
Weld stress due to My F4 = My/Zy
= 0.00 N/mm²
Resultant stress Ff = √[ (F1 +F3 + F4)² + 3*F2² ]
= 194.51 N/mm²
Ratio = Ff/pw
= 0.83 < 1.0, OK

Weld between beam web to support


To provide weld size sw = 6.0 mm
Force due to P fw1 = P-(2*f1)
= 253 kN
Force due to Fy fw2 = Fy
= 2 kN
Length of web weld lw = 2d
= 623.2 mm
Weld stress due to P F5 = fw1/0.707sw*lw
= 96 N/mm²
Weld stress due to Fz F6 = fw2/0.707sw*lw
= 1 N/mm²
Resultant stress Fw = √(F5² + 3*F6²)
= 96 N/mm²
Ratio = Fw/pw
= 0.51 < 1.0, OK

Note:
1 Since the diagonal member at the particular (I-SC-H-S-10,11,12)location is CJP this beam flange weld is made to CJP to arrive a uniformity in weld len
2
.
INDES ENGINNERING
Designed by Date
PROJECT ITC ONE-SKY BRIDGE MANOJ MS 13/08/2018
Checked by Revision
CONNECTION ID I-WC-H-P-13 MAK 0

Weld Design for Beam Connecting to Column / Beam Flange Page 1/1

You might also like