Service Manual: LCD TV
Service Manual: LCD TV
Service Manual
-2 -
MODEL:
LCT-32CH01ST
Version: 1.0
IMPORTANAT SAFETY PRECAUTIONS
Model No.:LCT-32CH01ST.doc 4
Version:1.0
Model No.:LCT-32CH01ST.doc 5
Version:1.0
SPECIFICATION
Model No.:LCT-32CH01ST.doc 6
Version:1.0
APPEARANCE & FUNCTION CONTROL
Model No.:LCT-32CH01ST.doc 7
Version:1.0
REAR SIDE OF LCD
Terminal Description:
Model No.:LCT-32CH01ST.doc 8
Version:1.0
REMOTE CONTROL
The buttons of the original remote control are as following:
Model No.:LCT-32CH01ST.doc 9
Version:1.0
Model No.:LCT-32CH01ST.doc 10
Version:1.0
OPERATION
Model No.:LCT-32CH01ST.doc 11
Version:1.0
Model No.:LCT-32CH01ST.doc 12
Version:1.0
Model No.:LCT-32CH01ST.doc 13
Version:1.0
Model No.:LCT-32CH01ST.doc 14
Version:1.0
Model No.:LCT-32CH01ST.doc 15
Version:1.0
Model No.:LCT-32CH01ST.doc 16
Version:1.0
Model No.:LCT-32CH01ST.doc 17
Version:1.0
Model No.:LCT-32CH01ST.doc 18
Version:1.0
Model No.:LCT-32CH01ST.doc 19
Version:1.0
Model No.:LCT-32CH01ST.doc 20
Version:1.0
Model No.:LCT-32CH01ST.doc 21
Version:1.0
Model No.:LCT-32CH01ST.doc 22
Version:1.0
Characteristic of Chassis
1. Specifications
2. Circuit constitution
AKIRA LCD TV with LS01 chassis is made up of switch power, system control circuit, video
processing circuit, audio processing circuit, sound power amplifier circuit, AV input circuit,
LCD screen module. Block circuit diagram of the whole machine is shown as below:
Model No.:LCT-32CH01ST.doc 23
Version:1.0
1) European market:
Model No.:LCT-32CH01ST.doc 24
Version:1.0
2). American and Asian market:
Model No.:LCT-32CH01ST.doc 25
Version:1.0
3. Introduction of printed board module
AKIRA LCD TV with LS01 is made up of power board, side AV board, remote control reception board, key
board, and mainboard. The table below is the introduction of the function of all printed board modules.
Module
No. Function Description
Designation
Main Board module is the chassis part of LCD TV signal processing. Under the control of
the system control circuit, It undertakes the task of converting the external input signal into
the unified digital signal that the LCD screen could identify. Mainboard controls the whole
Main machine through MCU bus, decode VIDEO signal, controls the image analog quantity
1 Board (brightness, contrast, chroma, hue, definition etc), adjusts white balance, generates OSD,
Module de-interlaces signal, converts signal frequency, and finishes signal A/D and D/A conversion,
video enhancement, LVDS signal coding and output; it has Scart interface, “S” terminal, AV
terminal, Ypbpr, HDMI and PC interface, Tuner input, sound demodulation, sound effect
treatment, sound power amplifier, and online upgrade of program.
Remote The remote reception board module is constituted by an indicator-light and a remote
Reception reception-head. Customer could manipulate the LCD TV by using remote controller very
2
Board conveniently. By the color of the indicator light, the operation mode of the LCD TV could be
Module judged (red is standby, green is power on).
Built-in
Power Convert the 100V~240V AC into DC, output have +24v, +12V, +5V, and the +5V_stb in
3
Board standby state.
Module
Keyboard module has 7 function keys (program increase/decrease, volume
Keyboard
4 increase/decrease, AV/TV switch, menu key, on/standby control), customer could use the
Module
key of the machine to manipulate the LCD TV.
LCD screen has built-in inverter that convert DC into high voltage AC signal to ignite the
LCD screen
5 backlight CCFL (Cold Cathode Fluorescent Light); the LCD screen process the video signal
module
from signal board and reappear.
Model No.:LCT-32CH01ST.doc 26
Version:1.0
Function of main ICs
1. Main ICs and functional modules
1 U15 JS-6H2/121 High frequency head, output sound and image video signal
4 U3 AT24C64A-10PU-2.7 EEPROM
11 U14 74LVC14AD VGA line and field synchronizing signal waveform shaping
25 U31 PI5C3306LE Bus (SDA, SCL) switch used for program update
Model No.:LCT-32CH01ST.doc 27
Version:1.0
2. Function introduction of ICs or functional module
Version:1.0
Pin function description:
Pin No. Designation of Pin Function of Pin
Model No.:LCT-32CH01ST.doc 29
Version:1.0
55 PWMO Pulse width modulation input
57 SCL IIC bus(clock)
58 SDA IIC bus(data)
60 GPIO0 GPIO1 selection signal
59 GPIO1 GPIO2 selection signal
62 WR# CPU write signal
63 RD# CPU read signal
61 CS CPU chip selection signal(low level effective)
56 INTN Interrupt signal(low level effective)
84 ALE Address latch signal
86 RESET Reset signal (high level effective)
85 V5SF SF Power(+5V)
4 DP_HS Line synchronization signal
5 DP_VS Field synchronization signal
23 DP_CLK Clock signal
6 DP_DE_FLD DE I/O terminal
64 ADDR0
┆ ┆ CPU address(R0~R7)signal
71 ADDR7
83 A_D0
┆ ┆ CPU address/data passage
76 A_D7
MISC port control signal
162 CVBS_OUT2 SCART2 interface CVBS signal output
163 CVBS_OUT1 SCART1 interface CVBS signal output
157 TEST MODE Test mode signal (grounding)
158 AIN_HS Line synchronization signal
159 AIN_VS Field synchronization signal
205 XTALI
Crystal oscillator interface
204 XTALO
SDRM
124 MA0
┆ ┆
121 MA3
118 MA4 Memory address (A0~A11)
┆ ┆
113 MA9
125 MA10
126 MA11
156 DQM0 Memory read/write byte signal
133 DQM1
109 DQM2
Model No.:LCT-32CH01ST.doc 30
Version:1.0
87 DQM3
128 BA0
Memory stack address selection
127 BA1
130 RAS# RAS signal
131 CAS# CAS signal
132 WE# Memory write drive
112 CLKE Memory clock signal drive
129 CS0# Memory chip selection signal
111 MCK Memory clock signal
155 MD0
┆ ┆
148 MD7
145 MD8
┆ ┆
138 MD15
Memory data interface
107 MD16
┆ ┆
100 MD23
95 MD24
┆ ┆
88 MD31
LVDS port
52 LVDS_VDDP LVDS channel power
38 PLL_GND PLL ground
39 PLL_VCC PLL power
47 LVDSGND LVDS ground
46 LVDSVCC LVDS channel power
43 TCLK1M
High, low differential clock port
41 TCLK1P
51 TA1 M
50 TA1P
49 TB1M
48 TB1P
High, low differential data port
45 TC1M
44 TC1P
41 TD1M
40 TD1P
Clock and power
146 VDDM
134 VDDM
Memory port digital power
108 VDDM
98 VDDM
Model No.:LCT-32CH01ST.doc 31
Version:1.0
72 VDDH
3.3V power supply
19 VDDH
160 VDDC
136 VDDC
119 VDDC
96 VDDC
1.8V power supply
74 VDDC
53 VDDC
27 VDDC
12 VDDC
13 VSSC
28 VSSC
54 VSSC
75 VSSC
97 VSSC
120 VSSC
137 VSSC
Digital ground
161 VSSC
20 VSSH
73 VSSH
99 VSSM
110 VSSM
135 VSSM
147 VSSM
195 AVDD3_ADC2
ADC module power (+3.3V)
168 AVDD3_ADC1
2 PLF2 Video PLL clock low pass filtering
207 MLF1 Memory PLL clock low pass filtering
1 PAVSS2 PLL ground
3 PAVDD2 PLL power (+1.8V)
206 PAVSS1 PLL digital ground
208 PAVDD1 PLL digital ground power (+1.8V)
203 PAVSS PLL Digital ground
202 PAVDD PLL digital ground power(+1.8V)
201 PDVSS PLL Digital ground
200 PDVDD PLL digital ground power (+1.8V)
177 AVDD_ADC1
186 AVDD_ADC2
ADC analog power (+1.8V)
193 AVDD_ADC3
178 AVDD_ADC4
176 AVSS_ADC1 ADC analog ground
187 AVSS_ADC2
Model No.:LCT-32CH01ST.doc 32
Version:1.0
194 AVSS_ADC3
179 AVSS_ADC4
165 AVDD3_OUTBUF
+3.3V analog power
164 AVSS_OUTBUF
166 AVDD3_BG_ASS
Analog ground
167 AVSS_BG_ASS
Model No.:LCT-32CH01ST.doc 33
Version:1.0
SVP-CX32LF internal block diagram:
Model No.:LCT-32CH01ST.doc 34
Version:1.0
3.T5BS4-9999 brief introduction:
T5BS4-9999 is a 16-bit high-speed micro-controller that is used for the control of a variety of
small to large devices. T5BS4-9999 could extend ROM and is an IC with 64 pins and is
packaged in PLCCC. It is the main control IC of the TV and implements I²C bus control of the
overall system.
Main features:
(900/L1 CPU)16bit high speed CPU(900/L1 CPU)
● Minimum time of 148ns in accomplishing instruction fetch
● Build-in 10K RAM
● 16M external extended memory
● simultaneously support 8-/16-bit external data bus
● 8-bit cycle for channel, 16-bit cycle for 1-control
● 1-channel universal serial interface
● 1-channel IIC bus mode serial interface
● 4-way 10 bit A/D conversion interface
● Clock monitor
● Real time control clock
● 4 chips selection/wait controller
● 34 interrupt signals output
9 CPU interrupt, 21 internal interrupt, 4 external interrupt
● 53 I/O pins
● Reserved wait function
● Clock control
fs=32.768KHz real-time time of time conversion function high frequency fc to fc/16
● Working voltage
When fc=27 MHZ, VCC=2.7~3.6V, when fc=10MHZ, VCC=1.8V to 3.6V
● 64 pin package(P-LQFP64-1010-0.50D standard)
Model No.:LCT-32CH01ST.doc 35
Version:1.0
Pin allocation description:
Model No.:LCT-32CH01ST.doc 36
Version:1.0
Pin introduction:
Pin Designation Function description
44 P20/A0/A16
8~5 bit address channel
┆ ┆
or 8~21 bit address channel
49 P25/A5/A21
50 P30/ External memory read control terminal
51 P31/ External memory write control terminal (AD0~AD7)
Version:1.0
53 P40/
54 P41/ Internal address selection signal
55 P42/
56 P60/SCK (no connection)
57 P61/SO/SDA I²C bus data
58 P62/SI/SCL I²C bus clock
59 P63/INT0 Interrupt request signal
60 P50/AN0
KEY control terminal
61 P51/AN1
62 P52/AN2 SCART1 interface FS signal
63 P53/AN3/ SCART2 interface FS signal
64 AVCC Analog power (+3.3V)
Model No.:LCT-32CH01ST.doc 38
Version:1.0
T5BS4-9999 internal functional block diagram:
Model No.:LCT-32CH01ST.doc 39
Version:1.0
4.STV-8217/STV-8218 brief introduction
STV-8217/STV-8218 is capable of following functions:
● B / G / I / L / M / N / D / K Standards
● Mono AM and FM
Loudness
● 4 stereo inputs
● 3 stereo outputs
● THRU mode
● 2 VRMS capability
Pin introduction:
4 GND_H ground
Version:1.0
Pin Designation Function Description
8 GND33_SC Ground
12 GND_SA Ground
27 LS_C No connection
30 LS_SUB No connection
31 HP_LSS_L No connection
32 HP_LSS_R No connection
Model No.:LCT-32CH01ST.doc 41
Version:1.0
Pin Designation Function Description
44 S/PDIF_IN No connection
45 S/PDIF_OUT No connection
52 XTALIN_CLKXTP
Oscillator interface
53 XTALOUT_CLKXTM
55 GND18_CLK1 Ground
56 GND18_CLK2 Ground
60 I2S_PCM_CLK No connection
67 VSS18 Ground
69 IRQ No connection
70 GND_PSUB Ground
72 VSS18_ADC Ground
Version:1.0
Pin Designation Function Description
75 GNDPW_IF Ground
77 GND18_IF Ground
Model No.:LCT-32CH01ST.doc 43
Version:1.0
STV-8217 internal block diagram:
Model No.:LCT-32CH01ST.doc 44
Version:1.0
STV-8218 internal block diagram:
Model No.:LCT-32CH01ST.doc 45
Version:1.0
5.TDA8944J brief introduction:
TDA8944J is a dual channel sound power amplifier, with each channel has 7W power output (the resistance
of the loudspeaker is 8Ω) to drive the loudspeaker; When music is played, its high efficiency could reduce
external heat dispersion and the requirement of the power supply equipment.
Its main features:
● High integration
● Standby and mute mode
● No switch switching noise
● 12V Power filtering
● Low working current
● Output current short-circuit grounding protection
● Overheat protection
● Linear output to drive external earphone, PC and portable audio equipment
Pin introduction:
Pin Designation Function Description
1 OUT1 Loudspeaker negative pole output terminal 1
2 GND1 Ground
3 VCC1 +12V Power
4 OUT1 Loudspeaker positive output terminal 1
5 N.C. No connection
6 IN1 Positive pole input terminal 1
7 N.C. No connection
8 IN1 Negative pole input 1
9 IN2 Negative pole input 2
10 MODE Operation mode selection (standby, mute, work)
11 SVR Voltage decoupling filtering (grounding)
12 IN2 Positive pole input terminal 2
13 N.C. No connection
14 OUT2 Loudspeaker negative output terminal 2
15 GND2 Ground
16 VCC2 +12V Power
17 OUT2+ Loudspeaker positive output terminal 2
Model No.:LCT-32CH01ST.doc 46
Version:1.0
TDA8944J internal block diagram:
Version:1.0
Pin function
Pin Designation Function Description
Digital image output terminal
92 VDE23
┆ ┆
96 VDE19
99 VDE18
┆ ┆
101 VDE16
┆ ┆
24bit(DP0~DP23)digital video output data bus
105 VDE12
108 VDE11
┆ ┆
117 VDE4
121 VDE3
┆ ┆
124 VDE0
2 VDO23
┆ ┆
5 VDO20
8 VDO19
┆ ┆
11 VDO16
14 VDO15
┆ ┆
17 VDO12
24bit(QO0~QO23)no connection
20 VDO11
┆ ┆
23 VDO8
26 VDO7
┆ ┆
29 VDO4
32 VDO3
┆ ┆
35 VDO0
119 VD_CLK Video output data clock
127 DE Video output data effective level signal
128 HSYNC Line synchronizing signal
1 VSYNC Field synchronizing signal
Digital audio output terminal
85 XTAL_IN
Crystal oscillator interface
84 XTAL_OUT
Model No.:LCT-32CH01ST.doc 48
Version:1.0
79 MCLKOUT Audio main control clock output
76 IIS_SCK IIS bus clock
75 IIS_WS IIS signal selection
74 IIS_SD0 IIS bus data
┆ ┆
IIS channel selection (no connection)
71 IIS_SD3
70 SPDIF (no connection )
67 MUTEOUT Mute control signal (no connection )
Control signal port
91 INT Interrupt request output
89 RESETN Reset signal input
Model No.:LCT-32CH01ST.doc 49
Version:1.0
ANX9011L internal block diagram:
Model No.:LCT-32CH01ST.doc 50
Version:1.0
Pin introduction:
Pin Designation Function Description
1 2Y0 PC left audio input
2 2Y2 HD terminal left audio input
3 2Z Left audio input
4 2Y3 SCART2 left audio input
5 2Y1 AV left audio input
6 E Ground
7 VEE Ground
8 GND Ground
9 S1
Select level input (+3.3V Power)
10 S0
11 1Y3 SCART2 right audio input
12 1Y0 PC right audio input
13 1Z Right audio output
14 1Y1 AV right audio input
15 1Y2 HD terminal right audio input
16 VCC +5V Power
Model No.:LCT-32CH01ST.doc 51
Version:1.0
Signal Processing Analysis and Measured Data
This chapter Mainly introduces the receiving and processing of image signal and sound signal, whole
machine system control process, and whole machine power supply system (Model of LT32GJ01E is taken as
an example, other models is similar and will not be explained here for each. There are minor differences in
power supply among different models of liquid crystal screen; the details are shown in Specifications).
1. Image signal flow
RF signal is demodulated by tuner, then the obtained video signal and signals inputted from COMPONENT
terminal, AV terminal, S terminal, 2-way Scart interface and VGA interface are all sent into video-processing IC
SVP-CX32LF to be processed. Input signals with different format are changed into uniform LVDS differential
signals, and are sent to liquid crystal screen. In addition, TV video signal is processed by SVP-CX32LF to
generate 2-way CVBS signal, which is used in 2-way Scart video output.
Signal inputted from HDMI interface is decoded into digital video signal, which is sent into video decoding IC
SVP-CX32LF to be processed. After procession, the obtained uniform LVDS differential signal is sent to liquid
crystal screen through LVDS interface to screen.
2.Sound flow
RF signal is demodulated by tuner, and then the obtained SIF signal (SIF-2 signal) and audio signal inputted
from Scart1 interface are directly processed by STV-8217. The output audio signal of STV-8217 is sent into
power amplifier TDA8944J, and the amplified signal is finally sent to speaker or earphone output.
Signals from HDTV terminal, AV terminal, Scart2 interface and PC Audio are first sent into 74HCT4052D for
choosing passages, and then sent into STV-8217 for demodulation and sound effect processing. The output
audio signal of STV-8217 is sent into power amplifier TDA8944J, and finally the amplified signals are sent to
speaker or earphone output.
After the demodulation and sound effect processing of STV-8217, there is an audio output which is used for
sound output of Scart1 terminal.
3. Whole machine power supply system
There are 4 ways of voltage output in the power panel: +24V(6A)、+12V(2A)、+5V(2A)and +5VS(1A).
+24V output is used by LCD screen; +12V output is used by power amplifier TDA8944J, and is also changed
into +8V output by AZ78L08ZTR-E1 to satisfy the need of STV-8217 IC; +5V output is changed into 1.8V output
and 3.3V output by DO (such as AZ1117H-1.8TRE1 and AZ1117H-3.3TRE1) to satisfy the needs ICs. +24V,
+12V and +5V outputs will be cut off in standby state. While +5VS output is the power supply of MCU, infrared
receiver and EEPROM etc, and will be cut off when the AC is turn off.
5V output will be divided into two ways: one way is changed into +3.3V and +1.8V analogue power supplies
through DC/DC converter for STV-8217 IC, ANX9011LF IC etc and peripheral circuits; other way is changed
into +3.3V and +1.8V digital power supplies through DC/DC converter for SVP-CX32 IC etc and peripheral
circuits, and this way of 5V voltage will be cut off in standby state, while the other way of 5V voltage supply
power especially for MCU, infrared receiver and EEPROM etc, and will not be cut off in standby state.
(1) Constitution and distribution of whole machine power supply
8V
+12V power U23 ST82X7
supply AZ78L08ZTR-E1 Pin 3
12V
FB34
CON11
Pin 1,2,3 +12V(voltage of line to screen) CON1
FB8
Pin 1,2,3,4 (used by 37 inches screen)
Model No.:LCT-32CH01ST.doc 52
Version:1.0
R206 U1 SVP-CX32
AZ1117H-1.8TRE1
Pin 177,178,186,193
CX_VA18
2.2mA
1.8V U30 Sil9011
U18
FB27 Pin 12, 24, 36, 51, 66,
81, 82, 112, 125
U30 Sil9011
AZ1084S-3.3TRE1 +3.3V
R214 U1 SVP-CX32
5V
U21
AZ1084S-1.8TRE1 Pin 12,27,53,74,96,
119,136,160
U20
+5V(CON11 Pin 7,8,9,10,11) FB20 2575mA
U2 IS42S32200C1-6TL
FB3 Pin 1,15,29,43,3,9,35,41,49,55,75,81
R2
U1 SVP-CX32 Pin 98, 108, 134,146
FB21
L24
+3.3V
U35 ST8217
Pin 7,16,20,22
L21
AZ1117H-3.3TRE1
Y4 27MHz XO voltage
Model No.:LCT-32CH01ST.doc 53
Version:1.0
U9 74HCT4052D Pin 16
FB12
Starting up mute circuit
FB24
FB17 U15 JS-6B2/121 Tuner Pin 13
FB7 +5V(voltage of line to screen)CON1 Pin 1,2,3,4 (used by
FB20 screen less than 32 inches)
R232
U30 Sil9011 Pin 44
R198
Back light switch control
CON13
R202 Back light height control
Pin 4,3
FB28
U26 CS4344-CZZ Pin 9
U1(SVP-CX32)Pin 85,D7,8(BAV99L)Pin 2
5V_SB(CON12 Pin1,2)
U4 T5BS4-9999
U24 Pin 64
FB9
FB25 AZ1117H-3.3TRE1
U5 SST39VF040
+1.8V FB10 Pin 32
U4 T5BS4-9999
FB11
Pin 18
Version:1.0
Position
Component model Pin 1(V) Pin 2(V) Pin 3(V)
number
4,5 5V +5V/4A
CON1
6 5Vstb +5V/1A
Model No.:LCT-32CH01ST.doc 55
Version:1.0
4. Position and definition of the main components and sockets on mainboard
Model No.:LCT-32CH01ST.doc 56
Version:1.0
(1) Socket definition
Position
S/no. Connecting Object Function Description
Number
1 CON403 Power panel GND,GND,+12V,+12V
7 CON5 Standby
10 CON12 Power panel +5V_SB , +5V_SB , GND , GND , Power supply control
11 CON13 Standby
12 CON8 Standby
16 J8 SCART2 input
17 J5 SCART1 input
18 J4 HDMI input
21 J3 VGA input
22 CON2 Standby
Model No.:LCT-32CH01ST.doc 57
Version:1.0
(2) Main components descriptions
Position
S/no. Component Function Description
number
A U16 AT24C02BN-10SU-1.8 EEPROM
B U14 74LVC14AD VGA line and field synchronizing signal shaping
C U2 IS42S32200C1-6TL 2MX32bits SDRAM, used for video signal access
D U3 AT24C64A-10PU-2.7 EEPROM
E U8 TCM809SENB713 MCU reset IC
F U31 PI5C3306LE I²C bus switcher for program upgrading
G Video decoding, image processor, A/D and D/A
U1 SVP-CX32LF
conversion
H Flash MEMORY , storing whole machine control
U5 SST39VF040-70-4C-NHE
program
I U4 T5BS4-9999 MCU,mainly control IC
J Address latch,for latching and extending the address
U6 74ALVC573PW
line
K U18、U21、U22 AZ1117H-1.8TRE1 3.3V to 1.8V DC-DC Converter
L U20 AZ1084S-3.3TRE1 5V to 3.3V DC-DC Converter
M U19 、U24 AZ1117H-3.3TRE1 5V to 3.3V DC-DC Converter
N U23 AZ78L08ZTR-E1 12V to 8V DC-DC Converter
O U26 CS4344-CZZ HDMI digital audio decoding and D/A conversion
P U30 ANX9011L HDMI decoding, HDTV video/audio reproduction
Q U25 AT24C02BN-10SU-1.8 EEPROM
R U28、U29 Rclamp0514M.TBT HDMI signal ESD protective device
S U35 STV-8217 Sound Processor
T U9 74HCT4052D AV input sound passage switcher
U U33 TDA8944J 2X7W Sound Amplifier(BTL Output)
V U15 JS-6H2/121 Tuner
Model No.:LCT-32CH01ST.doc 58
Version:1.0
5. Waveforms at key points
(1)RF inputting color bar signal, Composite Video Signal waveform at pin 14 of tuner U15, the waveform at pin 169 of U1
(SVP-CX32LF) is alike:
(2)RF inputting color bar signal, I²C bus clock signal SDA, pin 5, 6 of U31, pin 6 of U16, pin 39 of U35, pin 58 of U4, pin 40 of
U30, pin 57 of U1, pin 4 of tuner U15:
Model No.:LCT-32CH01ST.doc 59
Version:1.0
(3) RF inputting color bar signal, I²C bus clock signal SDA, pin 2, 3 of U31, pin 5 of U16, pin 40 of U35, pin 57 of U4, pin 39
of U30, pin 58 of U1, pin 5 of tuner U15:
(4)RF inputting grey signal, Composite Video Signal waveform at pin 14 of tuner U15, the waveform at pin 169 of U1
(SVP-CX32LF) is alike:
Model No.:LCT-32CH01ST.doc 60
Version:1.0
(5)RF inputting white signal, SIF Signal waveform at pin 11 of tuner U15, and waveform at pin 73 of sound effect processing
IC Stv-8217:
(6)RF inputting white signal, and inputting sound signal with 1KHz frequency, inductance waveforms at pin 28, 29 of U35, and
waveform of L26,L27:
Model No.:LCT-32CH01ST.doc 61
Version:1.0
(7)Inputting sound signal with 1KHz frequency, with the processing of U33 and power amplifier TDA8944J, waveform at pin 1,
4, 14, 17 of U33, and waveform at CON13 speaker and CON14earphone output interfaces:
Model No.:LCT-32CH01ST.doc 62
Version:1.0
TROUBLE SHOOTING
2.Failure phenomenon:There is sound but no picture; there is no OSD when start up; and
the back light is bright.
The reason and the processing:Check the connecting line to screen, and have it
connected well.
5.Failure phenomenon:+5V_SB voltage has output, but there are no picture, no sound,
and back light and indicating light are not on.
The reason and the processing:Check other groups of voltage; if they have no outputs,
then check Flash to find if it is installed well or damaged; if Flash is OK, find out that if the
power supply and output voltage of U4 works well.
Model No.:LCT-32CH01ST.doc 63
Version:1.0
Listing of Repair and Easily Damaged Parts
This listing of maintenance and repair parts are presented for reference only, modification
of parameters will not be informed. For accurate models or specifications, please consult
the newest data of our company. (32 inches series is taking as example)
Proportion
of
Number Name Part code Part number Print plate number
easy damage
(‰)
1. Panel frame JUG6.116.623 0.1
2. Back cover JUG6.116.624 0.1
3. Mount part JUJ7.356.005 0.1
Print plate
4.
Mainboard part JUG6.690.106 JUG7.820.015 1
Remote receiving Print plate
5.
board part JUG6.695.028 JUG7.820.016 0.5
Print plate
6.
Keyboard part JUG6.694.029 JUG7.820.017 0.5
Model No.:LCT-32CH01ST.doc 64
Version:1.0
Factory Mode Setting
1. Enter factory menu
Power on TV set, and make LCD at working state:
① Press 【MUTE】 key on remote control;
② Press “MENU” key on remote control, and switch to “SOUND” option with 【V+】,【V-】
key;
③ Move cursor to “Balance” option with 【P+】,【P-】key to enter setting status;
④ Press number key “3”、“1”、“3”、“8”on remote control to enter password.
Entering factory mode is then finished. Press【Display】key to quit factory mode.
⑴ Factory menu display is presented like bellow:
chassis:Ls01
Jul 29 2006 23:25:16
Version:LsE01-M32-V1.05WL
I²C off
Clear E²PROM
Panel Control
Factory Setting
System Control
Min/Max CONTROL
White Balance
Hotel Option
E²PROM Edit
Register Edit
Notes: “chassis:LS01”is the model number of local module,“Jul 29 2006 23:25:16”is the latest
upgrading time for software, and“Version:LSE01-M32-V1.05WL”is the version number of current
software.
(2)The detailed setting items are given bellow:
Contents of first page:
Setting Item Setting Content Setting Method Remark
Stop I²C bus Used for updating
IIC Off “OK”or“V+”,“V-”key
communication program
E²PROM Press “OK”key first,then Only done in first
Clear EEPROM
initialization press “V-”key setting station
Screen back light Press “V+”“, V-”keys to enter
Panel Control
brightness control submenu
Press “V+”“, V-”keys to enter
Factory Setting Factory Setting
submenu
Press “V+” key to enter
System Control System Control
submenu
Only set sub
Analog setting of picture Press “V+” key to enter
Min/Max Control brightness
and sound submenu
Bri Mid
White balance Press “V+” key to enter
White Balance
setting submenu
Press “V+” key to enter Used for hotel TV
Hotel Option Hotel mode
submenu
E²PROM data
E²PROM Edit No setting
editing
Register Edit Register No setting
Use 【P+】and 【P-】keys on remote control to make up or down option, and use【V+】
and【V-】keys to set.
Model No.:LCT-32CH01ST.doc 65
Version:1.0
Contents of sub pages:
Panel Control
Setting
Setting Item Remark
Value
LVDS Mapping 0x09 Polarity of LVDS signal
Backlight 100 Back light brightness value 1
SavePower1 50 Back light brightness value 2
SavePower2 30 Back light brightness value 3
Show SavePower mode in menu or not
BL-invisible Off
(ON:not show;OFF:show)
Factory Setting
System Control
Setting Setting
Setting Item Setting Value Remark
Item Value
Default Lang English Default OSD language SSC
L/L’ AGC 5 L/L’ sound AGC Delta 0
OverModulation On/Off OverModulation switch Positive 6
PreScl SCART 8 SCART L/R input amplitude preamplifing Negative 6
PreScl AM 12 AM_MONO IF preamplifing Write
PreScl FM 12 FM_MONO IF preamplifing
PreScl NICAM 19 NICAM sound IF preamplifing
Equalizer switch , Off is 5 section
EQ-invisible Off
equalization,On is high/low pitch setting
ATS Off Program auto sequencing switch
Logo Off Starting blue background LOGO switch
LOGO display contents ,“ V+ ”、“ V- ” for
choosing setting position,,“P+”、“P-”for
Logo Edit AKIRA
choosing letter,including 52 English big/small
letters together
Logo Color Logo Color Modified according to user’s require
Model No.:LCT-32CH01ST.doc 66
Version:1.0
Min/Max Control
White Balance
Normal Warm
R Gain 7DH R Gain 7DH
G Gain 80H G Gain 80H
B Gain 9AH B Gain 9AH
R Offset 80H R Offset 84H
G Offset 80H G Offset 80H
B Offset 74H B Offset 74H
Cool
R Gain 7DH
G Gain 80H
B Gain 9AH
R Offset 80H
G Offset 80H
B Offset 90H
Hotel Option
Setting
Setting Item Remark
Value
Hotel Mode Enable No Hotel mode presetting(Yes for Hotel Mode,No for normal TV mode)
Force Pos 1 Forced program number
Force Video ext1 Forced AV input terminal
Disable Keypad No Open local key function or not
Disable Remote No Open remote receiving function or not
Disable Setup Menu No Open “setting” in OSD menu or not
Notes:
Model No.:LCT-32CH01ST.doc 67
Version:1.0
A. In“Min/Max CONTROL” setting item, “Bri Mid”item is used to set sub brightness of
picture;
B. White balance needs to be set in “Normal”mode;
C. Set CLEAR E²PROM will clear the memory data, So do not set it unless it is needed;
other setting items do not need setting.
Model No.:LCT-32CH01ST.doc 68
Version:1.0
APPENDIX
LS01 module Schematic Diagram
( Sample Model: LCT-32CH01ST )
Model No.:LCT-32CH01ST.doc 69
Version:1.0
Model No.:LCT-32CH01ST.doc 70
Version:1.0
Model No.:LCT-32CH01ST.doc 71
Version:1.0
Model No.:LCT-32CH01ST.doc 72
Version:1.0
Model No.:LCT-32CH01ST.doc 73
Version:1.0
Model No.:LCT-32CH01ST.doc 74
Version:1.0
Model No.:LCT-32CH01ST.doc 75
Version:1.0
Power Module Schematic Diagram
76
position materiel mame materiel type materiel code
JUG2.025.321
main board assembly JUG6.690.106
Front panel assembly JUG6.116.623
Back cover assembly JUG6.116.624
pedestal assembly JUG6.121.001
Accessories JUG6.479.670
SPECIFICATION........................................................................................................................ 6
OPERATION .............................................................................................................................11
TROUBLE SHOOTING............................................................................................................ 63
APPENDIX.................................................................................................................... 69
1) SCHEMATIC DIAGRAM OF CHASSIS
2) SCHEMATIC DIAGRAM OF POWER MODULE
3) ASSEMBLY DIAGRAM
4) WIRING DIAGRAM
5) EXPLODED VIEW AND PART LIST
Model No.:LCT-32CH01ST.doc 3
Version:1.0