5/5/2019 Test: API 1169 RP 1110 | Quizlet
NAME
16 Multiple choice questions
1. Leak tests are determined to be successful if all pressure varations can be explained. True or False?
0
A. No answer given
B. Public Safety
C. Spike Test
D. True
E. Dry Nitrogen
2. For spike test, the test pressure is typically greater than?
A. No answer given
B. 1.25 / 4 hours
C. 10 psig/min or lower
D. 1.25 / 2 hours
E. 1.25
3. Any phyical object detected by an in-line inspection device
A. No answer given
B. Feature
C. Leak Test
D. Strength Test
E. Component
4. Leak test pressure is typically LESS than ____ and the duration is ___ or longer.
A. No answer given
B. 10 psig/min or lower
C. 1.25 / 2 hours
D. 5% of the volume
E. 1.25 / 4 hours
https://quizlet.com/181649689/test?answerTermSides=4&promptTermSides=6&questionCount=16&questionTypes=4&showImages=true 1/4
5/5/2019 Test: API 1169 RP 1110 | Quizlet
5. Any Physical part of the pipeline, other than line pipe, including but not limited to valves, welds, tees, flanges, fittings, taps,
branch connections, and outlets
A. No answer given
B. Feature
C. Leak Test
D. Spike Test
E. Component
6. What is a safety considerations the operator should consider when planning and conducting pressure tests?
A. No answer given
B. Dry Nitrogen
C. Public Safety
D. Spike Test
E. Strength Test
7. Test used to determine that a pipeline segment does not show evidence of leakage?
A. No answer given
B. Leak Test
C. Spike Test
D. Strength Test
E. Feature
8. A form of cracking of a material produced be the combined action of tensile stress, a corrosive enviroment, and material that is
susceptible to....
A. No answer given
B. Component
C. Spike Test
D. SCC or Stress Corrosion Cracking
E. Public Safety
https://quizlet.com/181649689/test?answerTermSides=4&promptTermSides=6&questionCount=16&questionTypes=4&showImages=true 2/4
5/5/2019 Test: API 1169 RP 1110 | Quizlet
9. What would be a typical pressuriazation rate?
A. No answer given
B. 10 psig/min or lower
C. 1.25 / 2 hours
D. 1.25 / 4 hours
E. 5% of the volume
10. Does API RP 1110 address the testing of piping systems using natural gas, nitrogen, or air?
A. No answer given
B. NO
C. Dry Nitrogen
D. Spike Test
E. True
11. Test used to verify the structural integrity of the pipelines with time depentent anomalies.
A. No answer given
B. Leak Test
C. Spike Test
D. Public Safety
E. Strength Test
12. Strength Test pressure ratio is typically ____ and the duration is ____ or longer.
A. No answer given
B. 5% of the volume
C. 1.25
D. 1.25 / 2 hours
E. 1.25 / 4 hours
13. Total amount of residual air in the test section should not exceed?
A. No answer given
B. 5% of the volume
C. 1.25 / 2 hours
D. 1.25 / 4 hours
E. 10 psig/min or lower
https://quizlet.com/181649689/test?answerTermSides=4&promptTermSides=6&questionCount=16&questionTypes=4&showImages=true 3/4
5/5/2019 Test: API 1169 RP 1110 | Quizlet
14. Test used to establish the operating pressure limit of a pipeline segment?
A. No answer given
B. Dry Nitrogen
C. Spike Test
D. Leak Test
E. Strength Test
15. RP 1110
A. No answer given
B. Component
C.
Recommended Practice for the pressire testing of steel pipelines for the transportation of gas, petroleum gas, hazardous
Liquids, Highly Volatile Liquids or carbon dioxide
D. NO
E. SCC or Stress Corrosion Cracking
16. What inert gas may be used to complete a drying process after the test medium has been displaced?
A. No answer given
B. Dry Nitrogen
C. Spike Test
D. Public Safety
E. Strength Test
https://quizlet.com/181649689/test?answerTermSides=4&promptTermSides=6&questionCount=16&questionTypes=4&showImages=true 4/4
