//+++++++Sketch untuk WaktuSholat_P10_1x1_DMD3_UpdateREVISI_KAMIS_13+++++++++++//

#include <SPI.h>

#include <DMD3asis.h>

#include <font/KecNumber.h>

#include <font/BigNumber.h>

#include <font/Font4x6.h>

#include <font/SystemFont5x7.h>

#include <font/Font3x5.h>

#include <font2/Font6x7.h>

#include <DS3231.h>

#include <EEPROM.h>

#include <avr/pgmspace.h>

#include <Wire.h>

#include <MemoryFree.h>

#define BUZZ 2

#define Font0 Font4x6

#define Font3 BigNumber

#define Font2 Font3x5

#define Font1 SystemFont5x7

#define Font4 KecNumber

#define Font5 Font6x7

DMD3 Disp(1,1);

char *pasar[] ={"WAGE", "KLIWON", "LEGI", "PAHING", "PON"};

int maxday[] = {0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};

RTClib RTC;

DS3231 Clock;

//Structure of Variable

typedef struct // loaded to EEPROM

uint8_t state; // 1 byte add 0

float L_LA; // 4 byte add 1

float L_LO; // 4 byte add 5

float L_AL; // 4 byte add 9

float L_TZ; // 4 byte add 13

uint8_t MT; // 1 byte add 17 // value 1-masjid 2-mushollah 3-surau 4-langgar

uint8_t BL; // 1 byte add 18

uint8_t IH; // 1 byte add 19

uint8_t SO; // 1 byte add 20

uint8_t JM; // 1 byte add 21

uint8_t I1; // 1 byte add 22

uint8_t I4; // 1 byte add 23

uint8_t I5; // 1 byte add 24

uint8_t I6; // 1 byte add 25

uint8_t I7; // 1 byte add 26

uint8_t SI; // 1 byte add 28

uint8_t ST; // 1 byte add 29

uint8_t SU; // 1 byte add 30

int8_t CH; //20 1 byte add 31

int8_t II; //21 1 byte add 32

int8_t IS; //22 1 byte add 33

int8_t IL; //23 1 byte add 34

int8_t IA; //24 1 byte add 35

int8_t IM; //25 1 byte add 36

} struct_param;

typedef struct

uint8_t hD;

uint8_t hM;

uint16_t hY;

} hijir_date;

// Variable by Structure

struct_param Prm;

hijir_date nowH;

// Time Variable
DateTime now;

float floatnow = 0;

uint8_t daynow = 0;

uint8_t ty_puasa = 0;

uint8_t hd_puasa = 0;

int8_t SholatNow = -1;

boolean jumat = false;

boolean azzan = false;

uint8_t reset_x = 0;

//Other Variable

float sholatT[8] = {0,0,0,0,0,0,0,0};

uint8_t Iqomah[8] = {0,0,0,0,0,0,0,0};

//Blue tooth Pram Receive

char CH_Prm[155];

int DWidth = Disp.width();

int DHeight = Disp.height();

boolean DoSwap;

int RunSel = 1; //

int RunFinish = 0 ;

//=======================================

//===SETUP===============================

//=======================================
void setup()

{ //init comunications

Wire.begin();

Serial.begin(9600);

// Get Saved Parameter from EEPROM

updateTime();

GetPrm();

//SendPrm();

//init P10 Led Disp & Salam

Disp_init();

//=======================================

//===MAIN LOOP Function =================

//=======================================

void loop()

// Reset & Init Display State

updateTime(); //every time

check_azzan(); //check Sholah Time for Azzan

DoSwap = false ;

fType(1);

Disp.clear();
// Timer Function every 10 Minutes

// Up All function with Timer in this fuction

Timer_Minute(1);

// =========================================

// List of Display Component Block =========

// =========================================

anim_JG(1); // addr: 1 show date time

dwMrq(drawMasjidName(),75,2,2); // addr: 2 show Masjid Name

dwMrq(drawDayDate() ,75,1,3); // addr: 3 show Hijriah date

dwMrq(msgPuasa(hd_puasa,ty_puasa),75,0,4); // addr: 5 show Remander Puasa

drawSholat(5); // addr: 5 show sholat time

dwMrq(drawInfo(130) ,75,1,6); // addr: 6 show Info 1

anim_DT(7); // addr: 7 show date time

dwMrq(drawInfo(280) ,75,2,8); // addr: 8 show Info 2

drawSholat(9); // addr: 9 show sholat time

dwMrq(drawInfo(430) ,75,1,10); // addr: 10 show Info 3

drawAzzan(100); // addr: 100 show Azzan

drawIqomah(101); // addr: 101 show Iqomah

dwMrq(drawInfo(730),50,0,103); //Message Sholat jumat // addr: 203 show Message Jum'at

blinkBlock(104); // addr: 104 show Blink Sholat

// =========================================

// Display Control Block ===================

// =========================================

if(RunFinish==1) {RunSel = 2; RunFinish =0;} //after anim 1 set anim 2

if(RunFinish==2) {RunSel = 3; RunFinish =0;} //after anim 2 set anim 3

// if(RunFinish==3) {RunSel = 3; RunFinish =0;}

if(RunFinish==3) //after anim 3 set anim 5 or anim 4 if puasa

if (ty_puasa!=0) {RunSel = 4; RunFinish =0;}

else {RunSel = 5; RunFinish =0;}

if(RunFinish==4) {RunSel = 5; RunFinish =0;} //after anim 4 set anim 5

if(RunFinish==5) {RunSel = 6; RunFinish =0;} //after anim 5 set anim 6

if(RunFinish==6) {RunSel = 7; RunFinish =0;} //after anim 6 set anim 7

if(RunFinish==7) {RunSel = 8; RunFinish =0;} //after anim 7 set anim 8

if(RunFinish==8) {RunSel = 9; RunFinish =0;} //after anim 8 set anim 9

if(RunFinish==9) {RunSel = 10; RunFinish =0;} //after anim 9 set anim 10

if(RunFinish==10) {RunSel = 1; RunFinish =0;} //after anim 10 set anim 1

if(RunFinish==100 and jumat ) {RunSel = 103; RunFinish = 0; reset_x = 1;} //after Azzan Jumat (anim
100)
 else if(RunFinish==100) {RunSel = 101; RunFinish =0;} //after Azzan Sholah (Iqomah)

if(RunFinish==101) {RunSel = 102; RunFinish =0; reset_x=1;} //after Iqomah(anim 101) set Message
Sholah (anim 102)

if(RunFinish==102) {RunSel = 104; RunFinish =0;} //after Message Sholah (anim 102) set Blink
Sholah(anim 104)

if(RunFinish==103) {RunSel = 104; RunFinish =0;} //after Messagw Jum'at (anim 103) set
Blink Sholah(anim 104)

if(RunFinish==104) {RunSel = 1; RunFinish =0;} //after Blink Sholah back to anim 1

// =========================================

// Swap Display if Change===================

// =========================================

if(DoSwap){Disp.swapBuffers();} // Swap Buffer if Change

// =========================================

// DMD3 P10 utility Function================

// =========================================

void Disp_init()

{ Disp.setDoubleBuffer(true);

Timer1.initialize(2000);

Timer1.attachInterrupt(scan);

setBrightness(int(Prm.BL));

fType(1);

Disp.clear();
 Disp.swapBuffers();

void setBrightness(int bright)

{ Timer1.pwm(9,bright);}

void scan()

{ Disp.refresh();}

// =========================================

// Time Calculation Block===================

// =========================================

void updateTime()

{ now = RTC.now();

floatnow = (float)now.hour() + (float)now.minute()/60 + (float)now.second()/3600;

daynow = Clock.getDoW(); // load day Number

void Timer_Minute(int repeat_time) //load every 1 minute

static uint16_t lsRn;

uint16_t Tmr = millis();

if((Tmr-lsRn)>(repeat_time*60000))

lsRn =Tmr;
 update_All_data();

Serial.print("freeMemory()=");Serial.println(freeMemory());

//SendPrm();

void update_All_data()

uint8_t date_cor = 0;

updateTime();

sholatCal(); // load Sholah Time

check_puasa(); // check jadwal Puasa Besok

if(floatnow>sholatT[6]) {date_cor = 1;} // load Hijr Date + corection next day after Mhagrib

nowH = toHijri(now.year(),now.month(),now.day(),date_cor); // load Hijir Date

if ((floatnow > (float)21) or (floatnow < (float)3.5) ) {setBrightness(15);}

else {setBrightness(Prm.BL);}

void check_azzan()

{ //Check Waktu Sholat

SholatNow = -1;

for(int i=0; i <=7; i++)

{
 if (i!=0 and i!=2 and i!=3) // bukan terbit dan bukan dhuha

if(floatnow >= sholatT[i])

SholatNow = i;

if(!azzan and (floatnow > sholatT[i]) and (floatnow < (sholatT[i]+0.03)))

if(daynow ==6 and SholatNow ==4 and Prm.MT==1) {jumat=true;}

azzan =true;

RunSel = 100;