Scribd
Upload
531 views41 pages

Flexural Design Calculations for Slabs and Beams

This document appears to be a design calculation sheet for flexural design of a singly reinforced concrete rectangular section according to ACI 318-02 standards. It includes dimensions of the section, material properties, calculations of required steel ratios and reinforcement areas, and equations used. The sheet analyzes two different sections with similar dimensions and properties but different required moments.

Uploaded by

Branko Đoković
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
531 views41 pages

Flexural Design Calculations for Slabs and Beams

This document appears to be a design calculation sheet for flexural design of a singly reinforced concrete rectangular section according to ACI 318-02 standards. It includes dimensions of the section, material properties, calculations of required steel ratios and reinforcement areas, and equations used. The sheet analyzes two different sections with similar dimensions and properties but different required moments.

Uploaded by

Branko Đoković
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
  • Flexural Design Calculation Sheet - Section 1: Initial flexural design calculations for a singly reinforced rectangular section according to ACI standards.
  • Flexural Design Calculation Sheet - Section 2: Subsequent design calculations for slab or footing sections with detailed dimensions and materials.
  • Flexural Design Calculation Sheet - Section 3: Design calculations related to beam types of sections according to ACI standards.

Design calculation sheet

Project no.: Date: Sheet no.: of Computed by: m.i

Checked by:
Subject:
Approved by:

FLEXURAL DESIGN of a Singly Reinforced Rectangular Section According to ACI 318-02

Section ID: Type of section: Slab or Footing Slab or Footing


Slab or Footing
Dimensions & Moment Materials
Ultimate moment (Mu) = 3.31 m.t Steel yield strength (fy) = 4200 Kg/cm2
Breadth of section (b) = 100 cm Concrete cylinder strength (f'c) = 500 Kg/cm2
Thickness of section (t) = 20 cm Concrete cube strength (fcu) = 625 Kg/cm2
Concrete clear cover (dc) = 3 cm b1 = 0.694
Depth of the section (d) = 16.4 cm
Design c/d = 0.047
r min = 0.18 % As min = 3.60 cm 2
Extreme tensile steel strain et = 0.06069 > 0.005
r req = 0.331 % As req = 5.43 cm2 OK….Tension controlled failure

f 8 10 12 16 20 22 25 28 30 32 Mu / (f 32
f'c b d2)
n 11 7 5 3 2 2 2 1 1 1

EQUATIONS AND NOTATIONS


Concrete cylinder strength (f 'c) = 0.80 * Concrete cube strength (fcu)

427515702.xls ­  ­ Rev.  0 07/10/2019
c = Distance from extreme compression fiber to neutral axis
r = (As / b d)
r min = Shrinkage and temperature minimum steel ratio

427515702.xls ­  ­ Rev.  0 07/10/2019
b1 = Factor defined in CLAUSE 10.2.7.3

427515702.xls ­  ­ Rev.  0 07/10/2019
f = Strength reduction factor (this sheet limits f = 0.9 in design)

427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
Design calculation sheet
Project no.: Date: Sheet no.: of Computed by:

Checked by:
Subject:
Approved by:

FLEXURAL DESIGN of a Singly Reinforced Rectangular Section According to ACI 318-02

Section ID: Type of section: Slab or Footing Slab or Footing


Slab or Footing
Dimensions & Moment Materials
Ultimate moment (Mu) = 1.77 m.t Steel yield strength (fy) = 4200 Kg/cm2
Breadth of section (b) = 100 cm Concrete cylinder strength (f'c) = 350 Kg/cm2
Thickness of section (t) = 20 cm Concrete cube strength (fcu) = 438 Kg/cm2
Concrete clear cover (dc) = 3 cm b1 = 0.801
Depth of the section (d) = 16.4 cm
Design c/d = 0.031
r min = 0.18 % As min = 3.60 cm2 Extreme tensile steel strain et = 0.0935626 > 0.005
r req = 0.220 % As req = 3.60 cm2 OK….Tension controlled failure

f 8 10 12 16 20 22 25 28 30 32 Mu / (f 32
f'c b d2)
n 8 5 4 2 2 1 1 1 1 1

FLEXURAL DESIGN of a Singly Reinforced Rectangular Section According to ACI 318-02

Section ID: Type of section: Slab or Footing Slab or Footing


Slab or Footing
Dimensions & Moment Materials
Ultimate moment (Mu) = 1.76 m.t Steel yield strength (fy) = 4200 Kg/cm2
Breadth of section (b) = 100 cm Concrete cylinder strength (f'c) = 350 Kg/cm2
Thickness of section (t) = 20 cm Concrete cube strength (fcu) = 438 Kg/cm2
Concrete clear cover (dc) = 3 cm b1 = 0.801

427515702.xls 07/10/2019
Depth of the section (d) = 16.4 cm

427515702.xls 07/10/2019
Design c/d = 0.031
r min = 0.18 % As min = 3.60 cm 2
Extreme tensile steel strain et = 0.0941183 > 0.005
r req = 0.220 % As req = 3.60 cm2 OK….Tension controlled failure

f 8 10 12 16 20 22 25 28 30 32 Mu / (f 32
f'c b d2)
n 8 5 4 2 2 1 1 1 1 1

427515702.xls 07/10/2019
EQUATIONS AND NOTATIONS
Concrete cylinder strength (f 'c) = 0.80 * Concrete cube strength (fcu)

427515702.xls 07/10/2019
c = Distance from extreme compression fiber to neutral axis
r = (As / b d)
r min = Minimum steel ratio

427515702.xls 07/10/2019
b1 = Factor defined in CLAUSE 10.2.7.3

427515702.xls 07/10/2019
f = Strength reduction factor (this sheet limits f = 0.9 in design)

427515702.xls 07/10/2019
427515702.xls 07/10/2019
427515702.xls 07/10/2019
427515702.xls 07/10/2019
Design calculation sheet
Project no.: Date: Sheet no.: of Computed by:

Checked by:
Subject:
Approved by:

FLEXURAL DESIGN of a Singly Reinforced Rectangular Section According to ACI 318-02


Section ID: Type of section: Beam Beam
Beam
Dimensions & Moment Materials
Ultimate moment (Mu) = 10 m.t Steel yield strength (fy) = 4200 Kg/cm2
Breadth of section (b) = 25 cm Concrete cylinder strength (f'c) = 350 Kg/cm2
Thickness of section (t) = 50 cm Concrete cube strength (fcu) = 438 Kg/cm2
Concrete clear cover (dc) = 3 cm b1 = 0.801
Depth of the section (d) = 43 cm
Design c/d = 0.105
r min = 0.35 % As min = 3.77 cm 2
Extreme tensile steel strain et = 0.0254902 > 0.005
r req = 0.598 % As req = 6.42 cm2 OK….Tension controlled failure

f 8 10 12 16 20 22 25 28 30 32 Mu / (f 32
f'c b d2)
n 13 9 6 4 3 2 2 2 1 1

FLEXURAL DESIGN of a Singly Reinforced Rectangular Section According to ACI 318-02

Section ID: Type of section: Beam Beam

427515702.xls 07/10/2019
427515702.xls 07/10/2019
Dimensions & Moment Materials
Ultimate moment (Mu) = 10 m.t Steel yield strength (fy) = 4200 Kg/cm2
Breadth of section (b) = 25 cm Concrete cylinder strength (f'c) = 350 Kg/cm2
Thickness of section (t) = 50 cm Concrete cube strength (fcu) = 438 Kg/cm2
Concrete clear cover (dc) = 3 cm b1 = 0.801

427515702.xls 07/10/2019
Depth of the section (d) = 43 cm

427515702.xls 07/10/2019
Design c/d = 0.105
r min = 0.35 % As min = 3.77 cm 2
Extreme tensile steel strain et = 0.0254902 > 0.005
r req = 0.598 % As req = 6.42 cm 2
OK….Tension controlled failure

f 8 10 12 16 20 22 25 28 30 32 Mu / (f 32
f'c b d2)
n 13 9 6 4 3 2 2 2 1 1

FLEXURAL DESIGN of a Singly Reinforced Rectangular Section According to ACI 318-02

Section ID: Type of section: Beam Beam


Beam
Dimensions & Moment Materials
Ultimate moment (Mu) = 10 m.t Steel yield strength (fy) = 4200 Kg/cm2
Breadth of section (b) = 25 cm Concrete cylinder strength (f'c) = 350 Kg/cm2
Thickness of section (t) = 50 cm Concrete cube strength (fcu) = 438 Kg/cm2
Concrete clear cover (dc) = 3 cm b1 = 0.801

427515702.xls 07/10/2019
Depth of the section (d) = 43 cm

427515702.xls 07/10/2019
Design c/d = 0.105
r min = 0.35 % As min = 3.77 cm 2
Extreme tensile steel strain et = 0.0254902 > 0.005
r req = 0.598 % As req = 6.42 cm 2
OK….Tension controlled failure

f 8 10 12 16 20 22 25 28 30 32 Mu / (f 32
f'c b d2)

427515702.xls 07/10/2019
n 13 9 6 4 3 2 2 2 1 1

427515702.xls 07/10/2019

427515702.xls ­  ­ Rev.  0 07/10/2019 Design calculation sheet Project no.: Date: Sheet no.: of Computed by: m.i Subject: Che
427515702.xls ­  ­ Rev.  0 07/10/2019 c = Distance from extreme compression fiber to neutral axis r = = Shrinkage and tempera
427515702.xls ­  ­ Rev.  0 07/10/2019 = Factor defined in CLAUSE 10.2.7.3 b1
427515702.xls ­  ­ Rev.  0 07/10/2019 f = Strength reduction factor (this sheet limits f = 0.9 in design)
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019
427515702.xls ­  ­ Rev.  0 07/10/2019

You might also like