Tools – Hand and Power

1
 Hazards
Workers using hand and
power tools may be
exposed to these hazards:
➢ objects that fall, fly, are
abrasive, or splash
➢ harmful dusts, fumes, mists,
vapors, and gases
➢ frayed or damaged electrical
cords, hazardous connections
and improper grounding

2
 Basic Tool Safety Rules

• Maintain regularly
• Use right tool for the job
• Inspect before use
• Operate according to
manufacturers’ instructions
• Use the right personal
protective equipment (PPE)
• Use guards

3
 Hand Tool Hazards
Hazards are usually caused by
misuse and improper maintenance

Do not use:
➢ wrenches when jaws are sprung
➢ impact tools (chisels and wedges) Crack
when heads have mushroomed
➢ tools with loose, cracked or
splintered handles
➢ a screwdriver as a chisel
➢ tools with taped handles – they
may be hiding cracks

4
 Hand Tools - Protection

Use PPE, such as safety

goggles and gloves

Keep floor surface

where working free from
debris and tripping or
slipping hazards

Keep cutting tools sharp

5
 Power Tools
Must be fitted with guards
and safety switches

Extremely hazardous
when used improperly

Different types,determined
by their power source:
➢ Electric
➢ Pneumatic
➢ Liquid fuel
➢ Hydraulic
➢ Powder-actuated

6
 Switches
Hand-held power tools must be
equipped with one of the following:

Constant pressure switch

shuts off power upon release
Examples: circular saw, chain saw,
grinder, hand-held power drill

On-Off Switch
Examples: routers, planers,
laminate trimmers, shears, jig
saws, nibblers, scroll saws

7
Power Tools - Precautions
• Disconnect tools when not in use, before servicing
and cleaning, and when changing accessories
• Keep people not involved with the work away from
the work
• Secure work with clamps or a vise, freeing both
hands to operate the tool
• Don’t hold the switch button while carrying a
plugged-in tool
• Keep tools sharp and clean
• Consider what you wear – loose clothing and
jewelry can get caught in moving parts
• Remove damaged electric tools & tag them: “Do
Not Use”

8
Power Tools – Precautions
Electric Cords
Don’t carry portable
tools by the cord

Don’t use electric

cords to hoist or lower
tools

Don’t yank cord or

hose to disconnect it

Keep cords and hoses

away from heat, oil,
and sharp edges
9
 Electric Power Tools
To protect a worker from shock, these tools must:
➢ have a 3-wire cord plugged into a grounded receptacle
➢ be double insulated, or
➢ be powered by a low-voltage isolation transformer

Double
insulated
markings
Plug with a
grounding
pin

10
Electric Tools – Good Practices
• Operate within design limits
• Use gloves and safety shoes
• Store in a dry place
• Don’t use in wet locations
unless approved for that
• Keep work areas well lit
• Ensure cords don’t present a
tripping hazard

11
 Abrasive Wheels and Tools
May throw off flying fragments

Equip with guards that:

➢ Cover the spindle end, nut,
& flange projections
➢ Maintain proper alignment
with the wheel
➢ Don’t exceed the strength of
the fastenings

Guard so that a minimal

amount of the wheel is
exposed
12
 Inspecting Abrasive Wheels
Before mounting:
➢ inspect closely for damage
➢ perform sound- or ring-test
to ensure free from cracks /
defects

To test:
➢ tap wheel gently with a light,
non-metallic instrument
➢ if wheel sounds cracked or
dead, do not use it because it
could fly apart

13
 Abrasive Wheel Use
To prevent cracking:
• fit the wheel on the spindle
freely
• tighten the spindle nut enough
to hold the wheel in place
without distorting the flange

Let the tool come up to speed

prior to grinding or cutting

Don’t stand in front of the wheel

as it comes up to full speed Ensure the spindle
speed doesn’t exceed
Use eye and/or face protection the maximum speed
marked on the wheel

14
 Abrasive Wheel Work Rests
Keep work rests not
more than 1/8th inch
from wheel surface

This prevents jamming

the work between the
wheel and the rest, which
may cause the wheel to
break

Don’t adjust wheel while

it’s rotating

15
 Guarding
Guard exposed moving
parts of power tools

Guard belts, gears,

shafts, pulleys,
sprockets, spindles,
flywheels, chains, or
other moving parts

Never remove a guard

when a tool is in use

16
 Guarding - Point of Operation

This shows a
radial arm
saw equipped
with proper
point of
operation
guards

The point of operation is where the work is actually

performed on the materials – it must be guarded
17
Guarding Protection

Nip Point

Machine guards must protect

the operator and others from:
➢ Point of operation
➢ In-running nip points
➢ Rotating parts
➢ Flying chips and sparks

18
 Radial Saw Guarding

Radial arm saw

equipped with an
upper and lower
blade guard

Guard to prevent the operator from coming

in contact the the rotating blade

19
Guarding Portable Circular Saws

Guard these saws above and below the base plate or shoe.
The lower guard must cover the saw to the depth of the teeth.

20
 Table Saw Guarding

Hood guard

Use a hood for guarding

21
 Pneumatic Tools
Powered by compressed air

Includes nailers, staplers,

chippers, drills & sanders

Main hazard - getting hit by Nail Gun -

a tool attachment or by a
fastener the worker is using Cut-Away View
with the tool

Take the same precautions

with an air hose that you
take with electric cords

22
 Pneumatic Tools - Fastening

Ensure tool is fastened

securely to the air hose to
prevent a disconnection

Use a short wire or

positive locking device
attaching the air hose to
the tool Wire used to secure hose

23
Pneumatic Tool Connections

Hose  Unacceptable
clamp

 Acceptable

24
 Pneumatic Tool Safety
Place a safety device on the
muzzle to prevent the tool
from ejecting fasteners,
unless the muzzle is in
contact with work surface

Install a safety clip or

retainer to prevent
attachments, such as
chisels on a chipping
hammer, from being ejected
Muzzle in contact
Wear eye protection. Wear with work surface
hearing protection with
jackhammers.

25
Compressed Air Cleaning

Don’t use compressed

air for cleaning

Exception - where
reduced to less than
30 p.s.i. with effective
chip guarding and PPE

26
 Liquid Fuel Tools

Usually gas powered

Main hazard – fuel vapors

Use only approved

flammable liquid containers

Before refilling a fuel-

powered tool tank, shut
down the engine and allow it
to cool

27
 Powder-Actuated Tools
User must be trained and
licensed to operate

Test tool each day before

loading to ensure the safety
devices are working properly

Wear suitable ear, eye, and

face protection

Select a powder level that will

do the work without
excessive force

28
 Fatal Fact

Employee killed when

struck in head by a nail
fired from a powder
actuated tool.

Tool operator was

attempting to anchor a
plywood form in
preparation for pouring
a concrete wall

29
 Easily Penetrated Material
Avoid driving into materials easily penetrated unless
materials are backed by a substance that will prevent the
pin or fastener from passing through

Also, don’t drive fasteners into very hard or brittle material

that might chip or splatter, or make the fasteners ricochet

30
Powder-Actuated Tool Safety Tips
• Don’t use in explosive or flammable atmosphere
• Inspect tool before use to ensure:
➢it is clean,
➢that moving parts operate freely
➢the barrel is free from obstructions and has
the proper shield, guard, and attachments
• Don’t load the tool unless using immediately
• Don’t leave a loaded tool unattended
• Keep hands clear of the barrel end
• Never point the tool at anyone
• Store unloaded in a locked box

31
 Jacks
To set up a jack, ensure:
• The base is on a firm, level
surface
• It’s centered
• The jack head is placed
against a level surface
• You apply the lift force evenly

Lubricate and inspect jacks

regularly

32
Jacks - Capacity

The manufacturer's
rated capacity must
be marked on all
jacks and must not
be exceeded

All jacks must have a

stop indicator that is
not exceeded

33
 Jacks - Blocking
Immediately block the load
after it is lifted. Put a block
under the base of the jack
when the foundation is not
firm, and place a block
between the jack cap and
load if the cap might slip.

Photo - handyman jack is

provided a firm base by
using the railroad tie.
The load is cribbed to
prevent it from falling.

34
 Summary

Hazards are usually the result of improper tool

use or not following one or more of these
protection techniques:
➢ Inspecting the tool before use
➢ Using PPE (Personal Protective Equipment)
➢ Using guards
➢ Properly storing the tool
➢ Using safe handling techniques

35