Scribd
Upload
43 views

Figure 1: in Shop Floor

The document describes an automated CNC machine lubrication system that uses two oil tanks, various level sensors, a control unit, and mobile app notifications. Oil is pumped from a secondary storage tank into the primary CNC tank when levels drop below a minimum level, and pumping stops at a maximum level. The control unit monitors levels continuously and sends data to the cloud for remote access. Users receive mobile warnings when the secondary tank reaches a low level.

Uploaded by

lingesh1892
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
43 views

Figure 1: in Shop Floor

The document describes an automated CNC machine lubrication system that uses two oil tanks, various level sensors, a control unit, and mobile app notifications. Oil is pumped from a secondary storage tank into the primary CNC tank when levels drop below a minimum level, and pumping stops at a maximum level. The control unit monitors levels continuously and sends data to the cloud for remote access. Users receive mobile warnings when the secondary tank reaches a low level.

Uploaded by

lingesh1892
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Figure 1: In shop floor*

SOW- Description:

1.CNC Lubrication tank (Primary tank): Lubrication tank of the CNC machine

2.Secondary storage tank: Auxiliary tank with large capacity compared to primary
tank , from which lubricant oil is refilled in the CNC lubrication tank

3. Min level - minimum allowed level of oil in CNC Lubrication tank. if oil level
decreases below this level, oil is pumped into the tank automatically

4.max level - maximum allowed level oil in CNC Lubrication tank after which
pump is turned off

5.Level sensor 1: Oil level sensor that continuously tracks oil level in CNC
lubrication tank

6.Level sensor 2: Oil level sensor that tracks oil level in secondary storage tank

7.Level indicator: Warning system that indicates the oil level in secondary storage
tank.

8.Control unit with wifi: Controls entire process and sends oil level in secondary
tank and other data to internet cloud for remote access.
Working Principle

1. Control unit continuously tracks the oil level in CNC Lubrication tank

2. Once the level reaches below set minimum level in the lubrication tank, the
lubricant is pumped into the tank from secondary storage tank, so that the oil
level inside tank increases

3. If the level reaches set maximum level, the pump is turned off and the process
repeat

4. Oil level in secondary storage tank is continuously stored in cloud. Oil level data
could be accessed by authorized persons in their mobile phone

5.if the oil level in secondary storage tank goes below a certain level machine
operator is indicated by indicator system and it is notified by warning message
through mobile app (mobile app view is given below)

You might also like