Universal Controller Hack - RoboSapien V2 - RoboGuide
Universal Controller Hack - RoboSapien V2 - RoboGuide
Home
RoboPaint
RoboSapien
RoboSapienV2
RoboPet
RoboRaptor
RoboReptile
Sensors
Internal Sensors
External Sensors
Camera
Circuitry
Motor Board
Pin
Headers
Test Pads
Motor
Connections
Main Board
Head -
Turn
Head - Tilt
Left Hand
Left Hand
Switch
Left
Shoulder
Left Foot
Right Hand
Righ Hand
Switch
Right
Shoulder
Right Foot
Waist -
Turn
Waist -
Bend
Waist - Tilt
Power
Groin Tilt
Sensor
Motor
Headers
Head -
Connectors
Small Chip
1 of 4 4/1/2018, 1:25 AM
Universal Controller Hack - RoboSapien V2 - RoboGuide http://www.evosapien.com/robosapien-hack/nocturnal/RoboSapienV2/un...
Large Chip
Main Board
EEPROM
Memory
Map
Positional
Programs
Controller
Programs
Head Board
Hand Boards
Foot Boards
Power Board
Controller
Shoulder Laser
Cannon Mod
Universal
Controller Hack
V2 Interface
Board
Brain
Replacement Hack
Evosapien Links
EvoSapien
Knitsu's
Robosapien Site
RoBBoTT's Neon
Mods site
Sprocket2Cog's
RoboRaptor site
Links
Knitsu's
SapienNation Site
Unofficial
Robosapien Hacks
and Mods site
Unofficial
Robosapien
Hacks and
Mods
Forum
2 of 4 4/1/2018, 1:25 AM
Universal Controller Hack - RoboSapien V2 - RoboGuide http://www.evosapien.com/robosapien-hack/nocturnal/RoboSapienV2/un...
RoboSapienPet's
RoboSapien site
Inside the
V2
V2 IR
Codes
Site Map
This hack is a work in progress. My controller had a small accident and became non functional, so I decided to
make some alterations to it :-). Basically I decide to make it so that I could use one controller to control any of
the V2's brethren with the one remote. I also wanted to be able to plug it in to a computer and use it to transmit
signals. The schematic bellow shows how I hope to achieve this, you can click on it for the full size version.
Currently I am breadboarding and coding the microcontroller for this project, the serial connection is proving
to be more difficult that I initially thought (and may not actually be possible the way I original envisioned) it
might be necessary to switch it over to a USB connection instead. It also appears I left off some components
and connections for the ADC power to the microcontroller.
3 of 4 4/1/2018, 1:25 AM
Universal Controller Hack - RoboSapien V2 - RoboGuide http://www.evosapien.com/robosapien-hack/nocturnal/RoboSapienV2/un...
4 of 4 4/1/2018, 1:25 AM