Scribd
Upload
56 views1 page

Specifications: Lubricants, Fluids, Sealers and Adhesives

This document provides specifications for lubricants, fluids, sealers, adhesives, refrigerants, refrigerant oil capacities, and torque specifications for climate control systems. It lists the approved refrigerants R134a and R1234yf and their specifications, refrigerant oil types, refrigerant and oil capacity amounts when charging, recommended amounts of refrigerant oil to add when installing new components, and the specified clutch air gap range and torque values.

Uploaded by

LUIS ARIAS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views1 page

Specifications: Lubricants, Fluids, Sealers and Adhesives

This document provides specifications for lubricants, fluids, sealers, adhesives, refrigerants, refrigerant oil capacities, and torque specifications for climate control systems. It lists the approved refrigerants R134a and R1234yf and their specifications, refrigerant oil types, refrigerant and oil capacity amounts when charging, recommended amounts of refrigerant oil to add when installing new components, and the specified clutch air gap range and torque values.

Uploaded by

LUIS ARIAS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

https://www.etis.ford.com/wsm/js/procedure.do?variantId=3050&proc...

Climate Control System - General Information


- Specifications
Print

Lubricants, Fluids, Sealers and Adhesives

Specifications
Refrigerant R134a (vehicles up to 20.06.2016) WSH-M17B19-A
Refrigerant R1234yf (vehicles from 20.06.2016) WSS-M17B21-A
Refrigerant oil (vehicles up to 20.06.2016 ) WSH-M1C231-B
Refrigerant oil (vehicles from 20.06.2016) WSS-M2C300-A2
Refrigerant Capacities (When Charging)

Grams
Air Conditioning 625
Refrigerant Oil Capacities (When Charging)

Milliliters
Air Conditioning 120
Addition of Refrigerant Oil (When new components are installed)

Milliliters
After renewal of A/C compressor without system Add the same drained quantity (to an empty
flush compressor)
Condenser 60
Evaporator 45
Receiver Drier 60
Every time refrigerant is evacuated as taken from the system
Refrigerant Hose/Line 30
O-Ring leak repair 30
When all new components are installed (including add 0
compressor)
When A/C (air conditioning) system is flushed 120
Clutch air gap

mm
Compressor clutch air gap 0.35 - 0.60
Torque Specifications

Item Nm lb-ft lb-in


Compressor drive plate retaining bolt 14 10.33 124

1 of 1 10/6/2016 10:57 AM

You might also like