Scribd
Upload
926 views6 pages

CHEMISTRY Raw Material

This document provides the chemical composition ranges for various grades of steel, including low carbon steel, medium carbon steel, alloy steel, boron steel, ball bearing steel, semi-free/free cutting steel, spring steel, case hardening steel and stainless steel. For each grade, the carbon, silicon, manganese, sulfur, phosphorus and other element contents are specified.

Uploaded by

aditya18dec
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
926 views6 pages

CHEMISTRY Raw Material

This document provides the chemical composition ranges for various grades of steel, including low carbon steel, medium carbon steel, alloy steel, boron steel, ball bearing steel, semi-free/free cutting steel, spring steel, case hardening steel and stainless steel. For each grade, the carbon, silicon, manganese, sulfur, phosphorus and other element contents are specified.

Uploaded by

aditya18dec
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 6

CHEMICAL COMPOSITION

GRADE C% Si % Mn% S% P% Cr% Ni% B% Mo% Pb%


max max
LOW CARBON STEEL
SAE 1006 0.08max 0.10max 0.25-0.40 0.05 0.04 - - - -
SAE1008 0.10max 0.10max 0.30-0.50 0.05 0.04 - - - -
SAE1010 0.08-0.13 0.15max 0.30-0.60 0.05 0.04 - - - -
SAE1015 0.13-0.18 0.15max 0.30-0.60 0.05 0.04 - - - -
SAE1018 0.15-0.20 0.10-0.20 0.60-0.90 0.05 0.04 - - - -
C 15 0.12-0.18 0.15-0.35 0.30-0.60 0.045 0.045 - - - -
EN 32B 0.10-0.18 0.05-0.35 0.060-1.00 0.07 0.05 - - - -
MEDIUM CARBON STEEL
35C8 0.32-0.40 0.10-0.40 0.60-0.90 0.05 0.05 - - - -
EN14B/27C15 0.20-0.30 0.10-0.35 1.30-1.70 0.06 0.06 - 0.40 max - -
CK 45 0.42-0.50 0.15-0.35 0.50-0.80 0.035 0.035 - - - -
EN 15B 0.35-0.40 0.05-0.35 1.10-1.30 0.06 0.06 - - - -
EN 8 0.35-0.45 0.05-0.35 0.60-1.00 0.06 0.06 - - - -
EN 8A 0.33-0.38 0.05-0.35 0.70-0.90 0.06 0.06 - - - -
EN 8D 0.40-0.45 0.05-0.35 0.70-0.90 0.06 0.06 - - - -
EN 9 0.50-0.60 0.05-0.35 0.50-0.80 0.06 0.06 - - - -
EN 5K 0.25-0.35 0.05-0.35 0.60-1.00 0.05 0.05 - - - -
SAE 1035 0.32-0.38 0.10-0.20 0.60-0.90 0.05 0.04 - - - -
SAE 1040 0.37-0.44 0.10-0.20 0.60-0.90 0.05 0.04 - - - -
SAE 1045 0.43-0.50 0.10-0.20 0.60-0.90 0.05 0.04 - - - -
BORON STEEL
SAE 10B21 0.18-0.23 0.30max 0.80-1.10 0.03 0.03 0.10-0.25 - 0.0005-0.003
SAE 15B25 0.23-0.28 0.30max 0.90-1.30 0.03 0.03 0.10-0.25 - 0.0005-0.003
DIN19MnB4M 0.20-0.25 0.20max 0.80-1.10 0.03 0.03 0.30-0.40 - 0.0005-0.003
ALLOY STEEL
SCM 415 0.13-0.18 0.15-0.35 0.60-0.85 0.03 0.03 0.90-1.20 - - 0.15-0.30
SAE1541 0.36-0.44 0.15-0.30 1.35-1.65 0.05 0.04 - - - -
SCM 435 0.32-0.39 0.15-0.30 0.55-0.90 0.03 0.03 0.80-1.25 - - 0.15-0.35
SAE 4135 0.33-0.38 0.15-0.30 0.70-0.90 0.04 0.03 0.80-1.10 - - -
SAE 4140 0.38-0.43 0.15-0.30 0.75-1.00 0.04 0.03 0.80-1.10 - - -
41Cr4 0.38-0.43 0.10-0.35 0.65-0.80 0.05 0.05 0.85-1.15 - - -
EN 19 0.35-0.45 0.10-0.35 0.50-0.80 0.05 0.05 0.90-1.50 - - 0.20-0.40
BALL BEARING
EN 31M 0.90-1.20 0.10-0.35 0.30-0.75 0.05 0.05 1.00-1.60 - - -
SAE 52100 0.98-1.10 0.15-0.30 0.25-0.45 0.025 0.025 1.30-1.60 - - -
SEMI FREE / FREE CUTTTING STEEL
En1A 0.07-0.15 0.10 max 0.80-1.20 0.3 0.07 - - - -
EN 1A (L) 0.07-0.15 0.10 max 0.80-1.20 0.3 0.07 - - - - 0.35
SPRING STEEL
File Steel 1.25-1.35 0.3max 0.20-0.40 0.03 0.03 0.50-0.70 0.2max Cu-0.25max 0.05max
CASE HARDENING STEEL
SAE 8620 0.18-0.23 0.15-0.30 0.70-0.90 0.04 0.035 0.40-0.60 0.40-0.70 - 0.15-0.25
SAE 8622 0.20-0.25 0.15-0.30 0.70-0.90 0.04 0.035 0.40-0.60 0.40-.070 - 0.15-0.25
16 MnCr5 0.14-0.19 0.15-0.40 1.00-1.30 0.035 0.035 0.80-1.10 - - -
20 MnCr5 0.17-0.22 0.15-0.40 1.10-1.40 0.035 0.035 1.00-1.30 - - -
STAINLESS STEEL
AISI 420 A 0.15-0.25 1.00 max 1.00-2.00 0.03 0.04-0.45 12.0-14.0 - - - -
AISI 420 B 0.28-0.35 1.00 max 1.00-2.00 0.03 0.04-0.45 12.0-14.0 - - - -
AISI 420 C 0.43-0.50 1.00 max 1.00-2.00 0.03 0.04-0.45 12.0-14.0 - - - -
Al%

0.055

-
-
-
FILLING INDEX
FILE SUBJECT FROM
NOS.
1 RAW MATERIAL TEST REPORT
2 TEST CERTIFICATE
3 HARDNESS & UTS TEST REPORT
4 INCOMING WIRE-ROD TEST CERTIFICATE
5 INCOMING WIRE-ROD TEST CERTIFICATE (MUKAND ONLY)
6 INSPECTION OF PHOSPHATE SOLUTION
7 CUSTOMER COMPLAINTS (RECEIVED)
8 REPLY TO CUSTOMER COMPLAINTS
9 COMPLAINT OF INCOMING / RAW MATERIAL
10 CALIBRATION FILE
11 ANALYSIS OF METALLURGICAL SAMPLES
12 CUSTOMER'S PURCHASE ORDER
13 TESTING STANDARDS
14 PARTY'S STANDARDS AND SPECIFICATION
15 IN-PROCESS INSPECTION
TO

You might also like