Scribd
Upload
172 views3 pages

Design of Axially Loaded Column: Axial Load Acting On The Co 168.613 KN

The document summarizes the design of an axially loaded column that is 300mm by 450mm. It calculates the total load on the column as 1012kN from loads such as a slab, finishing, and live loads across 16.45 square meters. It then determines the column has a short slenderness ratio of 6.66667 and designs the longitudinal reinforcement with 8 bars of 25mm diameter steel for a total area of 3927mm^2. The design also specifies 10mm diameter transverse links spaced at 400mm.

Uploaded by

shweta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
172 views3 pages

Design of Axially Loaded Column: Axial Load Acting On The Co 168.613 KN

The document summarizes the design of an axially loaded column that is 300mm by 450mm. It calculates the total load on the column as 1012kN from loads such as a slab, finishing, and live loads across 16.45 square meters. It then determines the column has a short slenderness ratio of 6.66667 and designs the longitudinal reinforcement with 8 bars of 25mm diameter steel for a total area of 3927mm^2. The design also specifies 10mm diameter transverse links spaced at 400mm.

Uploaded by

shweta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

Design of Axially Loaded Column

Column size 300 X 450 mm

Load Acting on Column


Calculations

Thickness of slab= 0.15 m


Dead load of slab= 3.75 kN/m2 3.5 450

Dead load of finishing= 1.5 kN/m2 300

Live load= 5 kN/m 2

Total load on the column= 10.25 kN/m2


Area on which this load act 16.45 m2 4.7
Axial load acting on the co 168.613 kN
Total number of floors= 6

Total axial load on the col 1011.68 kN


say 1012 kN
Factored load= 1518 kN
Design of Reinforcement

Unsupported length of Col 3m


Minimum eccentricity emin= 21 OK

Slenderness Ratio= 6.66667 Short Column

Working Stress Method


2.909 % Steel
Using 8 bars of dia 25 mm
Area of longitudinal bars Asc= 3927 mm2
Area of Concrete Ac = 131073 mm2
Permissible stress in conc.in direct 6 N/mm2 M25 grade of concrete
Permissible comp stress for column b 190 N/mm2 FE415 grade of steel

Load carried by column= 1532.6 kN SAFE

Transverse Reinforcement Design

Diameter of links should not be less 7 mm


Use 10 mm dia links spacing 400 mm
400
480

You might also like