Dawood College Of Engineering and Technology, Karachi
Metrology and Statistical Quality Control
Course Objectives & Scope:
Objectives: The course exposes the students to the principles of measurement, gauges and modern quality
concepts and their practical use. This will also refresh the basic statistical & probability techniques and their
usages in quality application.
Scope: At completion of degree with the course of Metrology and Statistical Quality Control, students find
confidence for applying the jobs in testing, inspection and quality control.
Recommended Books:
1. Metrology & Gauging
By: S.A.J. Parson……..any latest edition
2. Engineering Metrology & Instrumentation
By: R.K. Rajput
2. Metrology for Engineers
By: J.F.W. Galyer & C.R. Shotbolt……any latest edition.
3. Practical Metrology
By: G.H. Sharp……..any latest edition
4. Quality Control
By: D.H. Besterfield, Pearson Edition.
5. Introduction to Statistical Quality Control
By: Douglas C. Montgomery.
Department Of Industrial Engineering and Management
Dawood College Of Engineering and Technology, Karachi
METROLOGY & STATISTICAL QUALITY CONTROL <Theory>
5th Semester Batch: 2010
COURSE OUTLINES
Sr# TITLE / Contents
01 Introduction
Metrology, Objectives of Metrology, Necessity & Importance of Metrology, Standards of
Measurement. Limits, Fits & Tolerance. Methods for achieving Precision & Accuracy, Sources of
errors, classification of measuring instruments, classification of methods of measurements,
Selection of Instruments, Care & Handling of Equipment & Apparatus, Gauges
02 Principle of Measuring Instruments
Definitions, Classification of measuring equipments, Technical Specification of measuring
instruments, Principle of Mechanical Measuring Instruments, Principle of Optical Instruments
03 Basic Measuring Instrument
Engineer’s Steel Rule, Calipers, Vernier Calipers, Vernier Height Gauge, Vernier Depth Gauge,
Micrometers, Advantages & Limitation of Commonly used Precision Instruments
04 Angle & Taper Measurements
Angular Measurement; Introduction, Instruments for angular measurements
Taper Measurement; Gauges for Tapers, Taper measuring instruments
05 Measurement of Ircularity
Ircularity, Roundness & Ircularity, Types of Irregularities of ircular part, Measurement of ircularity
devices used, Measurement of roundness & machine shafts
06 Comparators
The Comparator, Desirable features of a comparator, use of comparator, Types of comparators,
mechanical comparators, Optical Comparators, Electrical & Electronic Comparators, Pneumatic
Comparators, Limit Gauges, Selection of Comparator
07 Measurement of Surface Finish
Introduction, Surface Texture, Methods of Measuring Surface Finish; Surface Inspection by
Comparison Methods, Direct Instrument Measurement. Sample length or cut-off length, numerical
evaluation or surface texture, adverse effects of poor surface finish
08 Optical Measuring Devices
Introduction, Magnifier, Microscopes; principle of microscope, general optical system of
microscope, types of micros scope. Accuracy of microscope, Optical Projectors, Telescopes,
collimator.
09 Straightness, Flatness, Squareness & Parallelism
Introduction, Straightness; defn of straightness of the line in two planes, straight edge,
measurement of straightness. Flatness; defn, flatness measurement. Squareness, Parallelism
10 Control Charts for Variables, Additional SPC Techniques for variables, Control Charts for Attributes,
Lot by lot Acceptance Sampling by Attributes, Acceptance Sampling System,
Reliability:
Course Instructor: _____________________
Engr. Ghulam Sarwar
(Assistant Professor)
Department Of Industrial Engineering and Management
Dawood College Of Engineering and Technology, Karachi
METROLOGY & STATISTICAL QUALITY CONTROL <Theory>
5th Semester Batch: 2010
LESSON PLAN
Subject Teacher: Engr. Ghulam Sarwar
Schedule TITLE / Contents
Week#01 Introduction: Metrology, Objectives of Metrology, Necessity & Importance of Metrology,
Standards of Measurement. Limits, Fits & Tolerance
Week#02 Introduction: Methods for achieving Precision & Accuracy, Sources of errors, classification of
measuring instruments, classification of methods of measurements, Selection of Instruments,
Care & Handling of Equipment & Apparatus, Gauges
Week#03 Principle of Measuring Instruments: Definitions, Classification of measuring equipments,
Technical Specification of measuring instruments
Week#04 Principle of Measuring Instruments: Principle of Mechanical Measuring Instruments, Principle
of Optical Instruments
Week#05 Basic Measuring Instrument
Engineer’s Steel Rule, Calipers, Vernier Calipers, Vernier Height Gauge, Vernier Depth Gauge,
Micrometers, Advantages & Limitation of Commonly used Precision Instruments
Week#06 Angle & Taper Measurements: Angular Measurement; Introduction, Instruments for angular
measurement
Week#07 Angle & Taper Measurements:
Taper Measurement; Gauges for Tapers, Taper measuring instruments
Week#08 Measurement of Ircularity: Ircularity, Roundness & Ircularity, Types of Irregularities of ircular
part, Measurement of ircularity devices used, Measurement of roundness & machine shafts
Week#09 Comparators: The Comparator, Desirable features of a comparator, use of comparator, Types of
comparators, mechanical comparators
Week#10 Comparators: Optical Comparators, Electrical & Electronic Comparators, Pneumatic Comparators,
Limit Gauges, Selection of Comparator
Week#11 Measurement of Surface Finish
Introduction, Surface Texture, Methods of Measuring Surface Finish; Surface Inspection by
Comparison Methods,
Week#12 Measurement of Surface Finish
Direct Instrument Measurement. Sample length or cut-off length, numerical evaluation or surface
texture, adverse effects of poor surface finish
Week#13 Optical Measuring Devices
Introduction, Magnifier, Microscopes; principle of microscope, general optical system of
microscope, types of micros scope
Week#14 Optical Measuring Devices
Accuracy of microscope, Optical Projectors, Telescopes, collimator
Week#15 Straightness, Flatness, Squareness & Parallelism
Introduction, Straightness; defn of straightness of the line in two planes, straight edge,
measurement of straightness
Week#16 Straightness, Flatness, Squareness & Parallelism
Flatness; defn, flatness measurement. Squareness, Parallelism
Week#17 Control Charts for Variables, Additional SPC Techniques for variables, Control Charts for
Attributes, Lot by lot Acceptance Sampling by Attributes, Acceptance Sampling System,
Reliability:
Department Of Industrial Engineering and Management
Dawood College Of Engineering and Technology, Karachi
METROLOGY & STATISTICAL QUALITY CONTROL <Practical>
5th Semester Batch: 2010
OBJECT LIST
Lab Incharge : Engr. Ghulam Sarwar
Laboratory: Metrology Location: 3rd Floor Dept.of I.E. & Mgt
Spring Semester start: ____________ Suspension of Classes: _________
Lab Object List Instrument/Device/Apparatus
Schedule
Week#01 To Stuy Micro meter , its use and measuring principle Standard Micrometer
Week#02 To Study components of vernier caliper, types of Standard Vernier caliper
measurement that can be taken and causes of error in
measurement
Week#03 To Take Reading by Vernier caliper with repeatability of Standard Vernier caliper
various specimen, and make chart
Week#04 To Determine the angularity of work piece surface with Universal Bevel Protractor
Universal Bevel Protractor, also make up various angles
Week#05 Use of Dial Indicator for checking, tolerances, roundness, Dial Indicator
evenness, parallelism, and eccentricity
Week#06 To stuy height gauge, its components and measuring Height Gauge
principle
Week#07 To Study inside and outsied calipers Inside/outside caliper
Week#08 To Study working principle of Snap gauges Snap Gauge
Week#09 To Study working principle and limitations of Plug gauges Plug gauge
Week#10 To study working principle of Lever Indicator Lever Indicator
Week#11 To study various attachements/accessories of Micrometer Attachements/accessories of
micrometer
Week#12 To Stuy use/working principle of contour gauge Contour gauge
Week#13 To study components and uses of Luxmeter Luxmeter
Week#14 To study various attachements/accessories of Micrometer Attachements/accessories of
micrometer
Week#15 To Stuy Block gauges (i.e slip gauges) and their measuring Block gauge
mechanism
Week#16 To Study working principle of Snap gauges Snap Gauge
Lab Incharge: _____________________
Engr. Ghulam Sarwar
(Assistant Professor)
