Bulletin No.

REF: ITB/KRT/GF/17/013
(Construction/Rehabilitation Works of ART Center in Tropical Diseases Teaching Hospital, Omdurman)

- Excel format for the Bill of Quantities

- Bidders shall submit as well a digital copy (CD/USB stick) containing all submitted documents.

No. Data Requirements

D.23.3 No. of copies of Bid that must be submitted Original : 1
Copies : 1
** Bidders shall submit as well a digital
file (CD/USB stick) containing all
documents **.

ART CENTER BUILDING

OMDURMAN TROPICAL DISEASES HOSPITAL
BILL OF QUANTITIES
Bill No. (1): Preliminaries
All Prices of items shall include Supplying, Installing, Connecting and testing unless otherwise indicated, the Contractor
is required to have approved full coordinated workshop drawings before starting contract activities, the price shall also
include all such works.
The Contractor should install, construct & erect all works according to drawings, specifications & Instructions of the
Engineer.
The Workmanship and Material to be used shall, unless otherwise Specified, comply with the Latest Editions of the
Requirements, Standards, Regulations, Recommendations, Code of Practice (BS, ASTM & Equivalent), and Amendments
thereof.

Item Description
Unit Qty. Rate Amount
No.
1.0 Mobilization & Demobilizations Job 1.0
2.0 Site Clearance
Cart away any debris and leave the Site clean and ready for building
operations, to the satisfaction of the Engineer
Job 1.0
3.0
Temporary Works
Submit Shop Drawings for approval and provide the following
Facilities during the entire Construction period up to the Time of
Substantial Completion :
.- Lighting & Electric Supply
.- Water Supply
.- Sanitary Facilities
.- Temporary Boundaries, Enclosures, Fencing & Site Protection. Job 1.0

Bill No. (1): Preliminaries

4.0 Facilities for the Engineer
Provide a A prefabricated office for the Engineer with a total floor area
of not less than 20 M2, office to include the following:
- Windows not less than 3 M2,
-Ceiling Fan or a Pedestal Fan.
- Adequate lighting, 3 double 40-Watts fluorescent tube fittings.
- Four double power sockets outlets.
- One A/C unit 18,000 btu.
- All doors shall have cylinder locks.
- 1 No. Office desks with chair, approx. 0.9x1.5m.
- 4 No. Office chairs.
- 1 No. lockable firm cupboards 0.6x0.9x1.0m with 3 shelves each.
Office may be removed on completion except if directed otherwise by
the Engineer.

L.SUM 1.0
Total of Bill No. (1) carried to Summary of Preliminaries Works

Bill No. (1): Preliminaries

 ART CENTER BUILDING
OMDURMAN TROPICAL DISEASES HOSPITAL
BILL OF QUANTITIES
Bill No. (2):
required Structural
to have approvedWorks
full coordinated workshop drawings before starting contract activities, the price shall also
include all such works.
The Contractor should install, construct & erect all works according to drawings, specifications & Instructions of the
Engineer.
The Workmanship and Material to be used shall, unless otherwise Specified, comply with the Latest Editions of the
Requirements, Standards, Regulations, Recommendations, Code of Practice (BS, ASTM & Equivalent), and Amendments
thereof.

Item Description
Unit Qty. Rate Amount
No.
All works, covered by this Bill, shall be according to the drawings,
specifications and instructions of the Engineer & to his Satisfaction.
1.0 Setting-out
Setting out works: Rates shall include but not limited to Site
clearance, all necessary equipments, tools, and workmanship needed
to Carry out the setting-out of the New extension Building Using batter
Board, theodolite...etc. in accordance to the bill of quantities, Drawings
and instructions of Engineer and to the satisfaction of Engineer ( Batter
board Not remove until G.B. Casting)
Job 1.0
2.0 Excavation & Backfilling
2.1 Excavation
Rate shall include digging, shoring, bracing…etc.
Excavation for Isolated Footings below the reference natural ground
level (to be decided on Site by the Engineer)and cart material away to
Approved Municipality Locations
Excavate & cart away the whole Built area top soil to depth 1.00 m, as
2.1.1
per Instruction of Eng. M3 460.00
2.1.2 E xca. For F1 M3 36.00
2.1.3 E xca. For F2 M3 87.00
2.1.4 E xca. For F3 M3 26.00
2.1.5 E xca. For F4 M 3
7.00
2.1.6 E xca. For F5 M3 19.00
2.1.7 E xca. For F6 M3 17.00
2.1.8 E xca. For F7 M3 16.50
2.1.9 E xca. For F8 M3 10.00
2.1.10 E xca. For F9 M3 3.00
2.1.11 Exca. For Strip Found. for Guard Room & Reception M3 30.00
2.1.12 Exca. For Strip Found. for Boundary Walls M3 20.00
2.2
Backfilling
Provide, lay and compact selected soil in layers of thickness 200 mm
compacted to a min. of 95% of max. dry density as per specifications
measures will be for the net compacted volume
2.2.1 For Isolated Footings M3 117.00
2.2.2 For Floor Leveling M3 500.00
2.2.3 Around Strip Foundation of the Guard Room & Reception M3 14.00
2.2.4 Around Strip Foundation of the Boundary Walls M3 8.00
2.2.5 For Floor Leveling of the Guard Room & Reception M3 12.00
3.0 Concrete Works
3.1
Plain Concrete Works
Provide, all materials mix and lay in position plain concrete Grade 15
(as per drawings ). Cost shall include all materials, form work, labour,
sampling, testing, mix. Design, curing, …etc.:
3.1.1 Under Isolated Footings (100 mm thick) for F1 M2 36.00
3.1.2 Ditto but for F2 M2 87.00
3.1.3 Ditto but for F3 M2 26.00
3.1.4 Ditto but for F4 M2 7.00
3.1.5 Ditto but for F5 M2 19.00
3.1.6 Ditto but for F6 M2 17.00
3.1.7 Ditto but for F7 M2 16.50
3.1.8 Ditto but for F8 M2 10.00
3.1.9 Ditto but for F9 M 2
3.00

Bill No. (2): Structural Works

Item Description Unit Qty. Rate Amount
No.
3.1.10 P. C. (100 mm thick) Under the R. C. Strip Foundation of the Guard
Room & Reception M2 20.00
3.1.11 Ditto but for Under R. C. Strip Foundation of the Boundary walls M2 13.00
3.1.12 Ditto but for Sub-floor slab in Guard Room & Reception M2 20.00
3.1.13 Ditto but for new Building Sub-floor slab M2 400.00
3.2

Reinforced Concrete Works

Provide all Materials for Reinforcement Concrete (RC),
Cost shall include:
1-Rod Reinforcement (grade460N/mm2 for all Sizes ): Provide materials,
cut to sizes, bend to shape and fix in position reinforcing bars & stirrups
with 1.5mm diameter binding wire, all required Related Materials & tests
…etc.
2- Concrete: Provide all materials, form work, labour, sampling, testing,
Mix design, mix, cast in position , curing, …etc.
(All work to be according to the drawings, Specifications & Directions
and Satisfaction of Engineer).
3.2.1 R.C. (Grade 25) in Isolated Footing F1 M3 21.50
3.2.2 Ditto but for F2 M3 43.25
2.2.3 Ditto but for F3 M3 13.00
3.2.4 Ditto but for F4 M3 3.75
3.2.5 Ditto but for F5 M3 9.25
3.2.6 Ditto but for F6 M3 8.50
3.2.7 Ditto but for F6 M3 8.15
3.2.8 Ditto but for F6 M3 4.85
3.2.9 Ditto but for F6 M 3
1.20
3.2.10 R.C. (Grade 25) in Strip Foundation of the Guard Room & Reception
walls M3 6.00
3.2.11 Ditto but for Strip Foundationof the Boundary wall M3 4.00
3.2.12 R. C. (Grade 30) in Short Column C1 M3 2.25
3.2.13 Ditto but for C2 M3 9.00
3.2.14 Ditto but for C3 M3 2.50
3.2.15 Ditto but for C4 M3 0.95
3.2.16 Ditto but for Csh.cl. M3 0.25
3.2.17 R.C. (Grade 25) in Grade Beams M3 44.00
3.2.18 R. C. (Grade 30) in Ground Floor Col. C1 M3 2.50
3.2.19 Ditto but for C2 M3 11.00
3.2.20 Ditto but for C3 M3 3.00
3.2.21 Ditto but for C4 M3 1.25
3.2.22 R.C. (Grade 25) in Ground Floor Beams M3 24.00
3.2.23 R.C. (Grade 25) in Ground Floor Beams for Guard Room & Reception M3 4.00
3.2.24 R.C. (Grade 25) in Ground Floor Cover Slab M3 53.00
3.2.25 R.C.(Grade 25) in Ground Floor Cover Slab for Guard Room &
Reception M3 6.50
3.2.26 R.C. (Grade 15) in Reception Counter Slab (reinforced with nominal
steel T 8 @150mmc/c both way M3 0.50
3.2.27 R. C. (Grade 30) in First Floor Col. C2 M 3
6.00
3.2.28 Ditto but for C3 M3 0.50
3.2.29 Ditto but for C4 M3 1.25
3.2.30 R.C. (Grade 25) in First Floor Beams M3 15.00
3.2.31 R.C. (Grade 25) in First Floor Cover Slab M3 23.00
3.2.32 R.C. (Grade 25) in Staircase include flights, Landings & Crancked
beams M3 4.00
3.2.33 R.C. (Grade 25) in Ground Floor Lintels M3 2.00
3.2.34 R.C. (Grade 25) in Guard Room & Reception Lintels M3 0.60
3.2.35 Ditto, but in First & Roof Floor Lintels M3 0.85
Total of Bill No. (2) carried to Summary of Structural Works

Bill No. (2): Structural Works

 ART CENTER BUILDING
OMDURMAN TROPICAL DISEASES HOSPITAL
BILL OF QUANTITIES
Bill No. (3):toArchitectural
is required have approvedWorks
full coordinated workshop drawings before starting contract activities, the price shall also
include all such works.
The Contractor should install, construct & erect all works according to drawings, specifications & Instructions of the
Engineer.
The Workmanship and Material to be used shall, unless otherwise Specified, comply with the Latest Editions of the
Requirements, Standards, Regulations, Recommendations, Code of Practice (BS, ASTM & Equivalent), and Amendments
thereof.

Item Description
Unit Qty. Rate Amount
No.
1.0
Brickwork
Provide & Build (ordinary red, burned bricks/Concrete Blocks) in
cement /sand mortar (1:6) for one brick Wall or more, (1:4) for half
brick Wall.
Rates to include for key to concrete columns and beams and m. s. ties
where necessary, details to be prepared by contractor for approval. All
works are to be the satisfaction of the Engineer. All measure will be
Net. Windows & Doors opening shall be detected.
Samples to be approved before commencement of works
1.1 One brick wall with ordinary red , around Grade Beam Internal. Rate
shall included excavation 30cm M2 372.00
1.2 One brick wall with ordinary red , around Grade Beam External.
Rate shall included excavation 30cm M2 50.00
1.3 One-brick wall with ordinary red, burned bricks in Ground Floor
Internal and Externally M2 637.00
1.4 1½ brick wall with ordinary red, burned bricks In Guard Room &
Reception Walls 1:6 C/S Mortar M2 100.00
1.5 1½ brick wall with ordinary red, burned bricks in Boundary walls.1:6
C/S Mortar including Brick Coping M2 65.00
1.6 One Brick Wall with ordinary red, burned brick for Reception Counter
walls 1:6 C/S Mortar M2 15.00
1.7 One-brick wall with ordinary red, burned bricks in First Floor Internal
and Externally M2 215.00
1.8 One-brick wall with ordinary red, burned bricks in Roof Floor Parapet
walls including red brick coping M2 60.00
1.9 One-brick wall with ordinary red, burned bricks in Wating area
(adults&children) M2 55.00
1.10 Provide And Build in Position Concrete Cluster Block sample to be
submitted by the contractor for Engineer approval in Wating area
(adults&children) M2 75.00
2.0
Plaster Works
Provide & Apply 20 mm thick cement/sand plaster (1:6) including all
necessary angle beads, grooves, metal lath, and special treatment at
joints, change of directions and between concrete and brick surfaces
etc, application can be by machines.
All as specified and to the satisfaction of the Engineer. All measure
will be Net ( Windows & Doors opening shall be detected)
2.1 On Ground Floor Internally M2 745.00
2.2 Ditto, but on Guard Room & Reception Internally M 2
70.00
2.3 Ditto, but on Boundary Walls ( Internally & Externally) M2 130.00
2.4 Ditto, but on Reception Counter Walls Internally M2 5.50
2.5 On Ground Floor Externally M2 275.00

Bill No. (3): Architectural Works

Item Description
Unit Qty. Rate Amount
No.
2.6 Ditto, but on Guard Room & Reception Externally M2 11.00
2.7 Ditto, but on Ground Floor R.C. Slab Soffit M2 345.00
2.8 Ditto, but on Guard Room & Reception R.C. Slab Soffits M2 20.00
2.9 Ditto, but on Ground Floor Narrow Width (W<30cm) M2 12.00
2.10 Ditto, but on Guard Room & Reception Narrow Width (W<30cm) M 2
13.00
2.11 Ditto, but on Boundary Narrow Width (W<30cm) M2 6.00
2.12 Ditto, On First Floor. Internally M 2
216.00
2.13 Ditto, On First Fl. Externally M2 180.00
2.14 Ditto, but on First Floor R.C. Slab Soffits M 2
152.00
2.15 Ditto, but on First Floor Narrow Width (W<30cm) M2 15.00
2.16 Ditto, On Roof Floor Parapet Walls (Internally & Externally) M 2
120.00
2.17 Ditto, but on Soffits and sides of staircase Flights & Landing M2 15.00
3.0
Paint Works
Provide & Apply prime coat, putty and two coats of plastic emulsion
paint to be finished with Mat oil paint for Internally. For external
plastered surfaces 3 coats of emulsion paint textured finish to be
applied by compressor, gun and rollers.
Rates to include for all works as specified and complete in every
respect to the satisfaction of the Engineer.
3.1 On Ground Floor Internally M2 750.00
3.2 Ditto, but on Guard Room & Reception Internally M2 83.00
3.3 Ditto, but on Boundary Walls ( Internally & Externally) M 2
136.00
3.4 Ditto, but on Reception Counter Walls Internally M2 5.50
3.5 On Ground Floor Externally M 2
275.00
3.6 Ditto, but on Guard Room & Reception Externally M2 11.00
3.7 Ditto, but on Ground Floor R.C. Slab Soffit M 2
345.00
3.8 Ditto, but on Guard Room & Reception R.C. Slab Soffits M2 20.00
3.9 Ditto, On First Floor Internally M 2
230.00
^3.10 Ditto, On First Floor Externally M2 180.00
3.11 Ditto, but on First Floor R.C. Slab Soffits M2 152.00
3.12 Ditto, On Roof Floor Parapet Walls ( Internally & Externally) M 2
120.00
3.13 Ditto, but on Soffits and sides of staircase Flights & Landing M2 15.00
Pavior & Tiles Works
4.0 Provide & Fix floor tiles according to Drawings, Specifications and
Instructions of the Engineer.
Rates to include for cutting and bedding and backing in cement/sand
mortar (1:6), source Spain or equivalent, grouted in white cement, size
and color to be approved by the Engineer, all complete as per
Drawings & Specifications.
Samples to be submitted for approval of the Engineer with the
necessary documents prior to Commencement of Work.
4.1 Floors Tiles
4.1.1 Porcelain Tile in Ground Floor M2 400.00
4.1.2 Porcelain Tile in Guard Room & Reception Floor M 2
16.00
4.1.3 Ceramic Tile in Ground Floor Bathroom M2 55.00
4.1.4 Ceramic Tile in Guard Room & Reception Floor Bathroom M 2
3.50
4.1.5 Porcelain Tile in First Floor M2 50.00
4.1.6 Ceramic Tile in First Floor M2 50.00
4.2 Walls Tiles
4.2.1 Ceramic tiles in Ground Floor bathroom M2 135.00
4.2.2 Ceramic tiles in Guard Room & Reception bathroom M2 22.00
4.2.3 Ceramic tiles in First Floor M 2
65.00

Bill No. (3): Architectural Works

Item Description
Unit Qty. Rate Amount
No.
4.3 Granite Tiles
4.3.1 Granite 30 mm thick, for Staircases tread with Groove Edged &
Staircases riser 20 mm thick as shown in drawings ML 24.00
4.3.2 Granite Tiles in Staircases Landings M2 20.00
4.3.3 Granite 30 mm thick, for Windows sills as shown in drawings, Specs.
To satisfaction of Eng. ML 43.00
4.3.4 Granite 20 mm thick, for Reception Counter toping Slab& Walls as
shown in drawings M2 19.00
4.4
Skirting
Provide Material and Fix in position as per drawings, Specifications
and instructions of the Engineer first quality from same Tile material
but be originally manufactured for skirting i.e. (tile cut is not accepted
to serve same) thickness = 11 mm (Spanish or Equivalent) including
cement and sand mortar bed and backing, cutting, fittings, trims,
accessories, jointing, grouting and polishing, as specified and to the
satisfaction of the Engineer.
4.4.1 75 mm Porcelain height in Ground Floor ML 250.00
4.4.2 75 mm Porcelain height in Guard Room & Reception ML 22.00
4.4.3 Ditto, but Granite 150 mm height in Staircases ML 14.00
4.5
Interlock Tiles & Curbstone
Provide & Fix Interlock Tiles size 8cm & Curbstone size 60x15cm
according to Drawings, Specifications and Instructions of the
Engineer.
Rates to include all materials and labour for cutting and bedding and
fixing curbstone in concrete (1:3: 6), source from reputable
manufacture, size and color to be approved by the Engineer, all
complete as per Drawings & Specifications. Samples to be submitted
for approval of the Engineer with the necessary documents prior to
Commencement of work
4.5.1 Provide and fix colour interlock . Samples to be submitted for
approval, rate to include for all Materials and works as per drawing,
specification and direct by Eng. M2 340.00
4.5.2 Provide & Fix curbstone, Samples to be submitted for approval, Rates
to include for all Materials and works as per drawing, specification and
direct by Eng. ML 88.00
5.0 Doors & Windows &Partition
5.1
Steel Doors
Provide and Erect Hinged, Pressed steel doors from a reputable source
to be approved and including iron mongery and factory powder
painted.
Fixing strictly according to manufacturer’s instructions.
Rates to include for all accessories, hard ware, frames, closers,
doorstops, glazing etc. complete in every respect, as Per Drawings,
Specifications
Type D 2 (1.50&XInstructions of thetype
2.15) m Exterior Engineer.
(weather resistance)
5.1.1 No. 2.00
5.1.2 Type D 3 (1.0 X 2.15) m Exterior type (weather resistance) No. 16.00
5.2
Aluminum Windows
Provide, Fabricate & Fix in position Aluminum Windows powder
coated of 3.5 mm average thickness for frames and leaves. The
Aluminum material should be first class (Italian or equivalent), Glazed
6mm reflecting glass externally, including all necessary frames, sub
frames, heavy duty extruded and anodized aluminum profiles, trims,
sealant, architraves, fly screens and weather stripping. All aluminum
works finished in white colour.
Rates to include for all work complete in every respect as specified and
to the Satisfaction of the Engineers.
(Dimension & Details as per Drawings)
5.2.1 W 1 Size (1.20 x 1.50) m No. 15.00
5.2.2 W 2 Size (1.00x 1.50) m No. 2.00
5.2.3 W 3 Size (2.00x 1.50) m No. 2.00
5.2.4 W4 Size (1.20x 1.20) m No. 1.00

Bill No. (3): Architectural Works

5.2.5 W 5 Size (2.00x2.00 ) m Roller Shuter Window No. 6.00
5.2.6 W6 Size (0.50X0.60) m No. 8.00

Bill No. (3): Architectural Works

Item Description
Unit Qty. Rate Amount
No.
5.3 Partition Works
5.3.1 Provide all materials and lay in position Reception Area Almunium
Partition ,Complete with all accessories and doors, shop drawings to be
Submitted from the contractor for Approvals. M2 30.00
5.3.2 Provide all materials and lay in position Toilets cubicles Partition
(made of steel frame Box sections & PVC sheets), complete with all
accessories and doors, shop drawings to be submitted from the
contractor for Approvals. M2 45.00
6.0 Ironmongery Works
6.1
Staircase Handrail
Provide, Manufacture and Fix in position Staircase Handrail
(Dimension & Details as per Drawings), Rates include all necessary
fixings, painting red oxide paint before fixing and final paint,
complete
Safety as per
Grills drawings, Gate
&Entrance specifications and direct by Eng. ML 8.00
6.2
6.2.1 Provide Manufacture and Fix Rectangular Steel Pipe, in Safety Grill
with Frame Section (40x40x1.0) mm & Horizontal and Vertical Grid
members of Section (30x60x1.0) mm, gauge heavy duty, factory
powder painted red oxide paint before fixing and final paint (colored
6.2.1.1 to
GW be1approved
Size (1.20by xthe Engineer),
1.50) m as shown on Drawings. No. 15.00
6.2.1.2 GW 2 Size (1.00x 1.50) m No. 2.00
6.2.1.3 GW 3 Size (2.00x 1.50) m No. 1.00
6.2.1.4 GW4 Size (1.20 x 1.20) m No. 1.00
6.2.1.5 GW5 louvers Size (2.00x2.00 ) m of frame steel box section
80x40x1.5mm and louvers of steel flat 50x3mm No. 6.00
6.2.1.6 GW6 Size (0.50X0.60) m No. 8.00
6.2.2 Entrance Gate D1 (4.00X1.50)m of steel circular pipes Æ1½" Frame &
steel circular pipes Æ 1" vertical & horizontal members No. 1.00
Total of Bill No. (3) carried to Summary of Architectural Works

Bill No. (3): Architectural Works

 ART CENTER BUILDING
OMDURMAN TROPICAL DISEASES HOSPITAL
BILL OF QUANTITIES
Bill No. (4):
required Mechanical
to have approvedWorks
full coordinated workshop drawings before starting contract activities, the price shall also include
all such works.
The Contractor should install, construct & erect all works according to drawings, specifications & Instructions of the
Engineer.
The Workmanship and Material to be used shall, unless otherwise Specified, comply with the Latest Editions of the
Requirements, Standards, Regulations, Recommendations, Code of Practice (BS, ASTM & Equivalent), and Amendments
thereof.

Item Description Unit

Unit Qty. Amount
No. Septic Tank Rate
1.0 Provide all materials and precast Septic Tank capicity( > 60 persons)
type A++ , Rate shall include excavation, sand layers & filling, testing,
…and the like.
All as per drawing, specifications and direct of Eng. No. 2.00
2.0
Soak-way Well
Excavation effluent soak-away well internal diameter (net after one
brick wall) from grout level to end depth of (2.0m) before lowest
summer water table complete with stringer beam cover slab and H.D.
Cast iron frame, cover and one brick thick wall with mix 1:6 lining to
wall with 2.0m internal diameter rate shall include test of water table
Constant discharge by using two three phase 10 horse pump for 4
hours + 4 tanker car according to local Municipality all complete to
satisfaction of Eng. Recovery test shall be carried out after the constant
Discharge test. Until the water level in the well returns approximately
to the static level according to the satisfaction of Eng.
No. 1.00
3.0 Provide and install Water closet seat (Eastern Type) from recognized
manufacturers type Twyford (England) or equivalent from Europe
country complete with cistern and all accessories (e.g. Angle valve,
shattf, …etc) all works as per drawing, specification and direct by Eng. No. 5.00
4.0 Provide and install Water closet seat (Wastern Type) from recognized
manufacturers type Twyford (England) or equivalent from Europe
country complete with cistern and all accessories (e.g. Angle valve,
shattf, …etc) all works as per drawing, specification and direct by Eng. No. 4.00
5.0 Provide and install shower rose from recognized manufacturers
(England) or equivalent from Europe country complete with all
accessories (e.g. valves, …etc.) all works as per drawing, specification
and direct by Eng.
No. 2.00
6.0
Provide and install Hand Wash Basin from a recognized reputable
manufacturer with all accessories including taps, p-trap, main valve,
Angle valve…etc. all works as per drawing, specification and direct
by Eng. No. 13.00
7.0 Kitchen sink ,single stainless steel sink with goose neck tap, all
accessories including taps, p-trap, main valve, Angle valve…etc. all
works as per drawing, specification and direct by Eng. No. 1.00
8.0
Floor drains shall be provided for toilets, washing areas on all areas as
indicated in the drawings. Floor drains shall be with 50mm or 100mm
bore-outlet (Collection floor drain type) as per drawing, specification
and direct by Eng. No. 6.00
9.0
Provide and lay horizontal & Fix Vertical UPVC pipes (6 bars) (Æ 100
mm) from a recognized reputable manufacturer with all fittings and to
be laid according to specifications. Rate shall include excavation and
backfill and all necessary works related as per drawing, specification
and direct by Eng. ML 150.00
10.0
Provide and lay Water Drain Spout of UPVC pipes (6 bars) (Æ 75 mm)
from a recognized reputable manufacturer with all fittings and to be
laid according to specifications. Rate shall include all necessary works
related 45 elbow as per drawing, specific and direct by Eng. ML 24.00
11.0
Provide and lay horizontal & Fix Vertical UPVC pipes (6 bars) (Æ 50
mm) from a recognized reputable manufacturer with all fittings and to
be laid according to specifications. Rate shall include excavation and
backfill and all necessary works related elbow as per drawing, specific
and direct by Eng. . ML 25.00

Bill No. (4): Mechanical Works

12.0
Provide materials and construct one Brick wall manholes of Size
45.0X45.0 cm with invert levels as specified in drawings. Provide
heavy duty cover for manhole.
Rate shall include Excavation, Backfilling, Brickworks, Plastering &
Waterproofing Works as per drawings elbow as per drawing, specific
and direct by Eng. No. 4.00
13.0
Provide materials and construct one Brick wall manholes of Size
60.0X60.0 cm with invert levels as specified in drawings. Provide
heavy duty cover for manhole.
Rate shall include Excavation, Backfilling, Brickworks, Plastering &
Waterproofing Works as per drawing, specification and direct by Eng No. 11.00
14.0 Provide materials and construct one Brick wall gully trap (30x30) cm.
Rate shall include Excavation, Backfilling, Brickworks, Plastering, &
Waterproofing & Heavy duty Cover elbow as per drawing, specific and
direct by Eng No. 15.00
15.0
Provide and erect water supply pipes PPR (Æ 25 mm .) from
recognized manufacture with all fittings elbow, tee, valve, reduce all
works as per drawing, specification and direct by Eng. ML 200.00
16.0
Provide and erect water supply pipes PPR from(Æ 19mm) recognized
manufacture with all fittings elbow, tee, valve, reduce all works as per
drawing, specification and direct by Eng. ML 150.00
17.0
Provide and fix booster pumps from recognized manufacturer Q = 1.1
L/sec, H = 15m, H.P = 1.0, with all fittings, non-return valves, gate
valves, …etc. Rate shall include the necessary supporting required &
Safety cage all be test as per drawing, specification and direct by Eng. No. 2.00
18.0
Provide and fix AC Split Unit 18000Btu, Mitsubishi, General or
equivalent. Gas piping & Electric wiring in 500x500mm PVC trucking
between indoor & Exterior units. A pair of Iron Brackets will also be
provided for installation of Exterior Unit, with all accessories &
fittings complete in all respects , The rate shall include UPVC Æ 1"
waste pipe with a slope of 150mm/m with the length to cover all as per
drawings & specifications No. 11.00
19.0
Provide and fix AC Split Unit 24000Btu, Gas piping & Electric wiring
in 500x500mm PVC trucking between indoor & Exterior units. A pair
of Iron Brackets will also be provided for installation of Exterior Unit,
with all accessories & fittings complete in all respects , The rate shall
include UPVC Æ 1" waste pipe with a slope of 150mm/m with the
length to cover all as per drawings & specifications No. 2.00
20.0 Provide and fix Water Cooler Unit (size 4,000), with ducting and
diffusers, rate will include all accessories No. 6.00
21.0 Provide and lay in position 5Kg CO2 Fire extinguishers No. 5.00
22.0
Provide material and fix in Bathrooms & Kitchen Floor and 20cm high
skirting in wall 4 mm thick torch applied water proofing membrane
from a Reputable manufacturer. Prime coats and over laps to be
according to Manufacture Instructions & Instruction of Engineer.
Samples are to be submitted to the Engineer for approval prior to
Provide materialof
commencement and fix in concrete Roof and 20cm high skirting in
work.
Parapet walls
Rate shall 4 mm
include forthick torch geotextile
applying applied water
sheetproofing membrane
of (120gm/m2) forfrom
aMembrane
ReputableProtection
manufacturer. Prime
as per coats specification
drawing, and over lapsandto be according
direct by Engto M2 110.00
23.0
Manufacture Instructions & Instruction of Engineer.
Samples are to be submitted to the Engineer for approval prior to
commencement of work.
Rate shall include for applying geotextile sheet of (120gm/m2) for
Membrane Protection as per drawing, specification and direct by Eng. M2 440.00
24.0
Supply & Apply 50 mm minimum thickness foam Concrete with dry
density 700 kg/cm2 to Slope (1:100) leading to fall. Finished surface to
be smooth. as per Drawings, Specifications and to Satisfaction of the
Engineer M2 440.00
25.0
Roof Tiles Works
Provide & Fix floor tiles according to Drawings, Specifications and
Instructions of the Engineer.Rates to include for cutting and bedding
and backing in cement/sand mortar (1:6), grouted in cement, cement
tiles Samples to be submitted for approval of the Engineer M2 340.00
Total of Bill No. (3) carried to Summary of Architectural Works

Bill No. (4): Mechanical Works

 ART CENTER BUILDING
OMDURMAN TROPICAL DISEASES HOSPITAL
BILL OF QUANTITIES
Bill No. (5):
required Electrical
to have approvedWorks
full coordinated workshop drawings before starting contract activities, and the price shall also
include all such works.
The Contractor should install, construct & erect all works according to drawings, specifications & Instructions of the
Engineer.
The Workmanship and Material to be used shall, unless otherwise Specified, comply with the Latest Editions of the
Requirements, Standards, Regulations, Recommendations, Code of Practice (BS, ASTM & Equivalent), and Amendments
thereof.

Item Description Unit

Unit Qty. Amount
No. Rate
Supply all materials, install, connect, test, and commission the
following electrical works as specified and as shown in the drawings,
all to the satisfaction of the Engineer

1.0 Electrical power supply

1.1 Main Distribution Board (MDB)
Panel –Type board fabricated from heavy gauge sheet steel with
lockable door, electrostatically painted in Grey comprising the
following:
- Copper bus-bars TPN+E rated at 200 A.
- 1 No TP main circuit breaker 200 A.
- 1 No TP MCCB 100 A
- 3 No TP MCCB2 60 A Set 1.00
Sub-Main Distribution Board (SMDB)
1.2 TPN+E Comprising the following:
- 1 No TP MCCB 100 A
- 4 No TP MCCB2 60 A Set 1.00
1.3 Sub-Distribution Boards (SDB):
TPN+E Panel boards, Complete with miniature circuit breakers. the
ratings of which are indicated in the drawings:

1.3.1 18-way with 60 A main switch No. 2.00

1.3.2 9-way with 30 A main switch No. 4.00
1.4
Main Cables:
4- Core X LPE 1000V copper cables:
Prices to be quoted as per meter length of cable. Payment shall be
according to actual length of cable used.
1.4.1 4C×95 mm2 armoured ML 20.00
1.4.2 4C×35 mm2 ML 25.00
1.4.3 4C×16 mm2 ML 113.00
1.4.4 4C×6 mm2 ML 111.00
1.5 Complete
Earthing System
Earthing System including earthing pit, earthing conductor,
1.5.1 earth wire and all necessary accessories.
The system Comprising the following:
Earth pit 75x75x75cm manhole complete with cover with earth
rod/rods driven to the ground to give maximum earth rod resistance of
one ohm.
Set 1.00
1.5.2 Earth wires
Single-Core Y/G copper conductor
1.5.2.1 1C× 35 mm2 (Y/G) Cu conductor ML 15.00
1.5.2.2 1C× 16 mm2 (Y/G) Cu wire ML 15.00
1.5.2.3 1C× (Y/G) Cu wire
6 mm2Points:
Electrical ML 15.00
1.6 Work includes laying of PVC conduits and all accessories, drwing-in
of wire from the point up to the sub-distribution board.

Bill No. (5): Electrical Works

 Lighting Points,
1.6.1 Wiring includes the light switch, use 3x1.5mm2 wire
Fan Points: No. 95.00
1.6.2 Wiring includes the fan regulator, use 3x1.5mm2 wire
No. 30.00
1.6.3 Flood light points use 3x2.5mm2 wire No. 10.00
1.6.4 13 A socket outlet points use 3x2.5mm2 wire No. 40.00
1.6.5 32
20 A
A socket
socket outlet
outlet points
points for
for 24,000
18,000 BTU
BTU A/C
A/C Units,
Units, use
use 3x6
3x4 mm2
mm2 wire No. 2.00
1.6.6 wire No. 11.00
1.7 Electrical Fixtures and Equipment:
1.7.1 2X4 feats fluorescent lamps with cover & Switch (Wall & Ceiling
Mounted) No. 65.00
1.7.2 ceiling lamps (2*60w,Ceiling Mounted, Round) with switch No. 30.00
1.7.3200 watt flood light No. 10.00
1.7.413 A, 3-pin sockets No. 40.00
1.7.520 A, 3-pin socket for water heater&A/C Units No. 11.00
1.7.632 A, 3-pin sockets for A/C Units No. 2.00
1.7.7 75 watt, 5-speed Ceiling Fan (150/140cm) with regulator No. 20.00
1.7.8 Exhaust Fan 12 inches ,Rate shall include Wood sub-frame of 20mm
thick. No. 7.00
Total of Bill No. (5) for Electrical Works Carried to Summary

Bill No. (5): Electrical Works

Bulletin No. 3

REF: ITB/KRT/GF/17/013
(Construction/Rehabilitation Works of ART Center in Tropical Diseases Teaching Hospital,
Omdurman)

- Excel format for the Bill of Quantities

- Bidders shall submit as well a digital copy (CD/USB stick) containing all submitted documents.

No. Data Requirements

D.23.3 No. of copies of Bid that must be submitted Original : 1
Copies : 1
** Bidders shall submit as well a digital file
(CD/USB stick) containing all documents **.

ART CENTER BUILDING

OMDURMAN TROPICAL DISEASES HOSPITAL

Bills of Quantities
All Prices of items shall include Supplying, Installing, Connecting and testing unless otherwise indicated,
the Contractor is required to have approved full coordinated workshop drawings before starting contract
activities, the price shall also include all such works.
The Contractor should install, construct & erect all works according to drawings, specifications &
Instructions
The of the and
Workmanship Engineer.
Material to be used shall, unless otherwise Specified, comply with the Latest
Editions of the Requirements, Standards, Regulations, Recommendations, Code of Practice (BS, ASTM &
Equivalent), and Amendments thereof.

Bill No. (6): Rehabilitation & Maintenance Works

Q
Demolition Works t
y
Item Description Unit . Qty. Rate

1 Ground floor
1.1 Dismantle with care from position timber door
size (1.00x2.70 m) and hand over to client No. ### 1
1.2 Ditto ditto size (1.20x2.70 m) No. ### 4
1.3 Ditto ditto size (2.00x2.70 m) No. ### 1
1.4 Ditto ditto Toilet doors size (0.80x2.1 m) No. ### 2
1.5 Ditto high level window size (2.10 x 0.75 m) in No. ### 2
toilet
 J
1.6 Demolish existing mastaba in old lab. o
Dimensions (6.00x 1.20 x 0.95m) and cart away Job Jb 1
waste. o
1.7 Demolish mastaba in kitchen dimensions (3x 0.60 Job b 1
m)
1.8 Dismantle with care from position and hand
over to client, kitchen sink No. ### 1
1.9 Ditto wash hand basin (WHB) in toilet No. ### 1
^1.10 Ditto wash hand basin (WHB) in old lab. No. ###
J 2
1.11 Dismantle ½ " water supply pipes and 2" waste oJ
pipes from kitchen Job bo 1
1.12 Ditto in old lab Job b 1
2 First floor
2.1 Dismantle with care from position and hand over
to client timber door size (1.20x2.70 m) No. ### 3
2.2 Ditto toilet door No. ### 3
2.3 Ditto high level window in toilet size (2.10 x No. ### 2
2.4 0.75 m) with care from position timber fascia
Dismantle
handrail and boards in balcony and hand over to
client ML
### 19
2.5 Dismantle with care from position and hand over
to client low level tank water closet (Western
Type) in toilet No..### 2
2.6 Ditto wash hand basin (WHB) and handover to
client No. ###
J 6
2.7 Dismantle from position and hand over to client o
internal water supply and drainage in old lab. Job Jb 1
o
2.8 Ditto in toilet Job b 1
2.9 Dismantle with care from position existing
lighting fixtures in toilet and hand over to client No. ### 4
^2.10 Dismantle External lighting wiring along west
and south walls at existing offices Job ### 1
3.00 Second Floor & roof Terrace
3.1 Demolish and cart away the existing parapet M###
2 19
3.2 walls
Dismantle with care from position and hand over
to client timber door in offices size (1.20 x 2.70 No. ### 3
3.3 m)Ditto high level window in toilet size (2.10 x No. ### 2
3.4 0.75staircase
Ditto m) room door No. ### 1
3.5 Ditto bath room doors No. ### 3
3.6 Ditto staircase well door No. ### 1
3.7 Dismantle with care from position existing timber
partition size (4.60 x 3.10) and handover to client No. ### 1
3.8 Ditto staircase room ceiling 2
M### 21
 J
o
3.9 Ditto timber fascia at balcony (18.6 ml) Job bJ 1
^3.10 Dismantle from position existing internal water o
supply and drainage net work Job b 1
3.11 Ditto wash hand basin (WHB) in toilets No. ### 2
3.12 Ditto shower tray No. ### 1
3.13 Ditto water closet (Western Type) No. ### 1
3.14 Drainage & External works
Dismantle from position and hand over to client
external water supply net work composing of 3 ML ### 40
lines ML ### 40
3.15 Ditto but 2" waste water pipe net work
3.16 Ditto but 4" Asbestos soil pipe net work ML ### 30
3.17 Demolish and cart away existing sewerage No. ### 5
manholes
Rehabilitation Works
1 Ground floor
1.1 for internal and external door Modify the door
opening and re-sized to size 2.15 x 1.00 to receive
new door, re-sized by making lintels with
galvanized steel angles & galvanized steel
perforated folded plate fixed with steel fischer
bolts Æ12mm and maintain jambs with required
materials and plaster and make good.
Contractor to submit shop drawings for approvals
No. ### 6
1.2 Provide fix in position external pressed steel door
size (1.00 x 2.15m) No. ### 6
1.3 Provide , fix in position PVC toilet door size No. ### 2
(0.80 x2.00 m)
1.4 Ditto Aluminum high level window size (0.75 x
2.10m) maintain jambs with required materials
and make good
Contractor to submit shop drawings for approvals No. ### 2
1.5 Provide material and repair locks and repaint in
synthetic enamel both frame and panels of
existing windows in existing offices size (0.36 No. ### 3
x1.70) No. ### 3
1.6 Ditto for metal grills
1.7 Provide material and repair locks and repaint in
synthetic enamel both frame and panels of
existing metal glazed windows in existing offices
size No. ### 6
(0.75 x1.75m)
1.8 Ditto for metal grills Q6
No. ###
t
Item Description Unit Qty. Rate
y
1.9 Provide material fix and maintain frame, door J.
locks and hinges, of existing internal aluminum o
partition size ( 4.00 x3.00) and make good Job b Job
^1.10 Make fenestration to receive exhaust fans size10"
in toilet, maintain jambs and make good No. ### 2
1.11 Provide material fix in position with fixative
Butty ( Not Cement/Sand Mortar), 40 x40 cm
porcelain floor tiles in offices M
2 ### 80
1.12 Ditto, Ditto porcelain tiles in old kitchen and
platform in front of ground floor offices M
2 ### 32
1.13 Ditto but skirting tiles in walls of offices and old
kitchen ML ### 60
1.14 Provide material , renovate subtend to re-store the
good working condition, ablution unit in ground
floor toilet Job Job
1.15 Clean and maintain to re-store the good working
condition, Western Type seat in toilet No. 1
1.16 Ditto Eastern Type seat in toilet No. 1
1.17 Provide material and replace existing waste pipes
in toilet Job Job
1.18 Maintain walls, rinse with sand paper, provide
material and apply 2 coats of plastic emulsion
paint to internal walls of offices of ground, color 2 140
M
to be decided by the consultant.
1.19 Ditto for external walls of ground floor M
2 60
1.20 Ditto in roof of offices and cantilevered roof M
2 125
1.21 Ditto in walls of old kitchen (elect. Room) M
2 40
1.22 Ditto in walls of toilets M
2 62
1.23 Ditto in roof of toilets M
2 12
1.24 Inspect, maintain and/or replace where needed
main electrical supply wiring net work in kitchen Job Job
1.25 Provide material fix in position, connect test and
commission 13A socket out let No. 4
1.26 Ditto wall mounted fan in old kitchen No. 1
1.27 Ditto but ceiling globe lamp with trough in old
kitchen and verandah No. 6
1.28 Ditto one way switch in old kitchen & verandah No. 6
1.29 Provide fix in position, test and commission
18000 Btu LG split unit A/C in offices of ground No. 4
1.30 floor
Ditto 20A A/C socket out let No. 4
1.31 Ditto 13A 3 pin socket out let No. 4
1.32 Ditto one way lighting switch No. 4
1.33 Provide material assemble in position, connect to
power supply 4mm coated wire in PVC trunk for
A/C units in ground floor ML 25
1.34 Provide material assemble in position, connect to
power supply 4ft ceiling fan complete with fan
regulator in ground floor No. 1
1.35 Ditto 10" exhaust fan in toilets No. 2
1.36 Ditto 4ft fluorescent lamp No. 12
1.37 Ditto 2 ft fluorescent lamp in offices No. 4
1.38 Ditto 2 ft fluorescent lamp in toilet No. Q 3
t
Item Description Unit Qty. Rate
y
1.39 Distribution Boards: These be standard MEM .
shield DB, EIETRA (KSA) TPN+ E stab lock
type with SMCBS of ratings and numbers as
shown on the drawings: DB- 100 A, 18-way No. 1
1.40 Check and repair where necessary electrical
supply wiring network in ground floor Job 1
1.41 Provide , fix and connect 25mm flexible cable ML 25
2.00 First Floor
2.1 Maintain, repair locks, repaint in synthetic
emulsion and subtend in good condition metal
glazed window and grill (1.75 x 0.75m) No. 6
2.2 Ditto for metal window & grill size 0.36 x1.70 No. 2
2.3 Provide material, manufacture and assemble in
position moski timber fascia , balustrades and
hand rail in balcony ML 18.60
2.4 for internal and external door Modify the door
opening and re-sized to size 2.15 x 1.00 to receive
new door, re-sized by making lintels with
galvanized steel angles & galvanized steel
perforated folded plate fixed with steel fischer
bolts Æ12mm and maintain jambs with required
materials and plaster and make good.
Contractor to submit shop drawings for approvals
No. 3
2.5 Ditto toilet external door No. 1
2.6 Ditto PVC internal door for toilets size 0.80 x No. 2
2.7 2.00
Ditto Aluminum high level window size (0.75 x
2.10m) maintain jambs and make good No. 2
2.8 Provide materials, close Water cooler fenestration
& maintain wall, plaster and make good (size 0.60
x0.50) No. 3
2.9 Provide material fix in position with fixative
Butty ( Not Cement/Sand Mortar), 40 x40 cm
porcelain floor tiles in offices M
2 55
3.0 Ditto in balcony floor M
2 37
^2.10 Ditto, but skirting in offices M
2 33
2.11 Ditto, but in skirting in balcony M
2 20
2.12 Ditto, but glazed wall tiles in toilet M
2 40
2.13 Provide material and apply 2 coats of plastic
emulsion paint to internal walls of offices of first
floor, Rate shall include Maintain walls, remove
of old paint coats with sand paper color to be
decided by the consultant.
M
2 140
2.14 Ditto in external walls of balcony M
2 60
2.15 Ditto in toilet walls M
2 40
2.16 Ditto in soffit of slabs at offices M
2 80
2.17 Ditto in soffit of slabs at toilets M
2 25
2.18 Ditto in roof of at balcony M
2 Q 54
t
Item Description Unit Qty. Rate
y
2.19 Dismantle from position, reduce length of pole .
and re- fix in position, ceiling fan No. 3
2.20 Provide, fix in position and connect 4 ft double
fluorescent lamp fixture with cover No. 6
2.21 Provide, replace existing and connect and test one
way lighting switch No. 6
2.22 Ditto 13A socket out let No. 6
2.23 Provide, fix, connect to power supply , test and
commission 18000 Btu split unit A/C No. 3
2.24 Provide material, fix in position, and connect to
power supply source elect. Supply 4mm wire net
work for A/C in external trunks ML 30
2.25 Provide, fix and connect globe lamps with cover
complete with switch in balcony roof No. 4
2.26 Distribution Boards: These be standard MEM
shield DB, EIETRA (KSA) TPN+ E stab lock
type with MCBS of ratings and numbers as shown
on the drawings: DB- 100 A, 18-way No. 1
2.27 Provide , fix and connect 25mm flexible cable ML 30
2.28 Provide , fix and connect 25mm flexible cable ML 25
2.29 Provide, fix and connect to sewer Western Type No. 1
2.30 seat
DittoinEastern
toilet Type seat No. 1
2.31 Ditto Foot shower Tray No. 1
2.32 Provide material and connect 1/2" PPR internal
water supply net work Job 1
2.33 Provide material, maintain and make good urinal No. 1
unit
2.34 Dismantle and re-fix and connect WHB, as
directed by the consultant. No. 3
2.35 Provide material and replace existing waste pipes Job 1
2.36 in toilet and repaint in 3 coats plastic emulsion
Maintain
existing duct shaft Job 1
3.00 Second Floor
3.1 Maintain, repair locks, repaint in synthetic
emulsion and subtend in good condition metal
glazed window and grill (1.75 x 0.75m) No. 6
3.2 Ditto for metal window & grill size 0.36 x1.70 No. 2
3.3 Provide material, manufacture, assemble in
position and finished with approved color a
moski timber fascia balustrades and hand rail in
ML 18.60
balcony
3.4 for internal and external door Modify the door
opening and re-sized to size 2.15 x 1.00 to receive
new door, re-sized by making lintels with
galvanized steel angles & galvanized steel
perforated folded plate fixed with steel fischer
bolts ?12mm and maintain jambs with required
materials and plaster and make good.
Contractor to submit shop drawings for approvals No. 3
3.5 Ditto toilet external door No. 1
3.6 Ditto PVC internal door for toilets size 0.80 x No. 2
3.7 2.00
Ditto Aluminum high level window size (0.75 x
2.10m) maintain jambs and make good No. Q 2
t
Item Description Unit Qty. Rate
y
3.8 Maintain and repaint in 3 coats plastic emulsion .
existing duct shaft Job 1
3.9 Provide materials, close water Cooler fenestration
maintain wall, plaster and make good (size 0.60
x0.50) No. 2
4.0 Provide material, fix in position 40 x40 cm
porcelain tiles to offices M
2 55
^3.10 Ditto in balcony floor M
2 37
3.11 Ditto in skirting in offices M
2 33
3.12 Ditto in skirting in balcony M
2 20
3.13 Ditto glazed wall tiles in toilet M
2 40
3.14 Provide material and apply 2 coats of plastic
emulsion paint to internal walls of offices of first
floor, Rate shall include Maintain walls, remove
of old paint coats with sand paper color to be
decided by the consultant.
M
2 140
3.15 Ditto in external walls of balcony M
2 60
3.16 Ditto in toilet walls M
2 40
3.17 Ditto in soffit of slab at offices M
2 80
3.18 Ditto in soffit of slab at toilets M
2 25
3.19 Ditto in soffit of slab at balcony M
2 54
3.20 Maintain and repaint in synthetic enamel fascia Job 1
balustrades
3.21 Provide material and plaster wall at closed door in
second floor office 2 3
M

3.22 Inspect, maintain and/or replace where needed

main electrical supply wiring net work in offices Job 1
3.23 Provide, replace existing and connect and test one
way lighting switch No. 6
3.24 Provide, fix in position and connect 4 ft double
fluorescent lamp fixture with cover No. 2
3.25 Provide, fix and connect globe lamps with cover
complete with switch in balcony roof No. 4
3.26 Ditto in bath room No. 4
3.27 Provide, fix , connect & test ceiling fan with
regulator No. 1
3.28 Provide, ix, connect to power supply , test and
commission 18000 Btu split unit A/C No. 3
3.29 Provide material, fix in position, and connect to
power supply source elect. Supply 4mm wire net
work for A/C in external trunks ML 40
3.30 Distribution Boards: These be standard MEM
shield DB, EIETRA (KSA) TPN+ E stab lock
type with SMCBS of ratings and numbers as
shown on the drawings: DB- 100 A, 18-way No. 1
3.31 Check and repair where necessary electrical
supply wiring network in ground floor Job Q 1
t
Item Description Unit Qty. Rate
y
3.32 Maintain walls, rinse with sand paper, provide .
material and apply 2 coats of plastic emulsion
paint to internal walls of offices of first floor,
color to be decided by the consultant. M
2 140
3.33 Ditto in external walls of balcony M
2 60
3.34 Ditto in toilet walls M
2 40
3.35 Ditto in soffit of slab at offices M
2 80
3.36 Ditto in soffit of slab at toilets M
2 25
3.37 Ditto in soffit of slab at balcony M
2 54
3.38 Maintain and repaint in synthetic enamel fascia
balustrades Job 1
3.39 Provide material and carry out maintenance to
walls of stair case room Job Job
3.40 Maintain walls, rinse with sand paper, provide
material and apply 2 coats of plastic emulsion
paint to internal walls of stair case well, color to
be decided by the consultant. 2 115
M

3.41 Provide material and assemble in position

polystyrene false ceiling to roof of stair case room M
2 22
3.42 Modify fenestration, maintain jambs
,Manufacture and fix in position pressed steel
door for stair case room size 1.00 x2.15 No. 1
3.43 Provide, fix and connect Western Type seat in No. 1
3.44 toilet
Ditto HLTC seat No. 1
3.45 Ditto shower No. 1
3.46 Provide material and connect 1/2" PPR internal
water supply net work Job 1
3.47 Provide, fix and connect as directed by the
consultant, WHB No. 2
3.48 Provide material and replace existing waste pipes
in toilet Job 1
3.49 Provide material and replace existing waste pipes
in toilet Job 1
Roof Terrace
4 Provide material and construct in cement sand
mortar mix 1:8 one brick parapet wall M
2 47
4.1 Provide material and plaster parapet wall in
cement sand plaster mix 1:6 M
2 100
4.2 Remove old paint coats with sand paper, provide
material and apply one prime coat and 2 finishing
coats of plastic emulsion paint to parapet walls,
color to be decided by the consultant. 2 100
M

4.3 Ditto to external walls of stair case room M

2 20
4.4 Provide material, lay and fix in roof terrace and
20cm high skirting in wall 4 mm thick torch
applied water proofing membrane from a
Reputable manufacturer. Prime coats and over
laps to be according to Manufacture Instructions
& Instruction of Engineer.
Samples are to be submitted to the Engineer for
approval prior to commencement of work.
Rate shall include for applying geotextile sheet of
(120gm/m2) for Membrane Protection as per
drawing, specification and direct by Eng

M2 Q140
t
Item Description Unit Qty. Rate
y
4.5 Provide material fix in position with cement sand .
mortar 1:6 40 x40 cm terrazzo floor tiles in roof
terrace with adequate slope M
2 140
4.6 Provide and install (Fiber glass 6 layers, to be
protected inside with Anti Algae Paint, Water
tanks of capacity 2000 liters with all fittings,
float, non-return valves, 2-gate valves with uinun,
drain, overflow, …etc. Rate shall include the
necessary supporting required and support one
brick on one half brick bracket as per drawing,
specification and direct by Eng. No. 3
4.7 Drainage & External works
Provide material, assemble and connect to fittings
Æ 1" PPR pipe water supply net work ML 45
4.8 Ditto, but PVC Æ 2" waste pipe ML 45
4.9 Ditto, but Æ 4" PVC vertical stack soil pipe net
work ML 45
4.10 Ditto, but Æ 4" PVC horizontal soil drain pipe
net work ML 24
4.11 Provide material build in cement sand mortar
protective one brick wall around grade beam ML 30
4.12 Provide material and apply cement sand plaster
mix 1:6 to east and west walls of existing block M2 140
4.13 Provide material and apply one prime coat and 2
finishing coats of plastic emulsion paint to west
and east walls, color to be decided by the M2 140
consultant.
4.14 Ditto to south facade of the existing block M2 195
Total Amount of Rehabilitation & Maintenance Works
eaching Hospital,

submitted documents.

equirements
Original : 1
Copies : 1
submit as well a digital file
containing all documents **.

ITAL

unless otherwise indicated,

gs before starting contract
gs, specifications &
omply with the Latest
e of Practice (BS, ASTM &

Amount
Amount
Amount
Amount
Amount
Amount
Amount
ART CENTER BUILDING

Summary of Works
Bill
Description Amount
No.
1 Preliminaries
2 Structural Works
3 Architectural Works
4 Mechanical Works
5 Electrical Works
6 Rehabilitation & Maintenance Works

Total