Scribd
Upload
389 views2 pages

Siprotec 7sl86 Profile

Siprotec

Uploaded by

Angel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
389 views2 pages

Siprotec 7sl86 Profile

Siprotec

Uploaded by

Angel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SIPROTEC 7SL86

Combined line differential and distance protection

www.siemens.com/siprotec

Description
The combined SIPROTEC 7SL86 line differential and dis-
tance protection has specifically been designed for the
protection of lines. With its modular structure, flexibility
and the powerful DIGSI 5 engineering tool, the SIPROTEC
7SL86 device offers future-oriented system solutions with
high investment security and low operating costs.

Main function Differential and Distance Protection

Tripping 3-pole, minimum tripping time: 9 ms

Inputs and 12 predefined standard variants with 4/4


outputs or 8/8 current/voltage transformers, 5 to
SIPROTEC 5 Device with Expansion Module
31 binary inputs, 8 to 46 binary outputs

Hardware Flexibly adjustable I/O quantity structure


• Protection data communication over different dis-
flexibility within the scope of the SIPROTEC 5
modular system
tances and physical media, such as optical fiber, two-
wire connections, and communication networks
Housing width 1/3 × 19 inch to 2/1 × 19 inch
• Phasor Measurement Unit (PMU)
Applications Functions
DIGSI 5 permits all functions to be configured and com-
• Line protection for all voltage levels with 3-pole trip-
bined as required.
ping
• Minimum tripping time: 9 ms
• Phase-selective protection of overhead lines and ca-
bles with single-ended and multi-ended infeed of all • Main protection function is differential protection
lengths with up to 6 line ends with adaptive algorithm for maximum sensitivity and
stability even with the most different transformer er-
• Also used in switchgear with breaker-and-a-half layout
rors, current-transformer saturation and capacitive
• Transformers and compensating coils in the protec- charging currents
tion zone
• Several distance-protection functions selectable as
• Detection of ground faults in isolated or arc- backup protection or secondary main protection: Clas-
suppression-coilground power systems in star, ring, or sic, reactance method (RMD), impedance protection
meshed arrangement for transformers
• Directional backup protection and various additional
functions
Efficient and modular

• Adaptive power-swing blocking, out-of-step protec- • Serial protection data communication via optical fi-
tion bers, twowire connections and communication net-
works (SDH networks, MPLS electrical power systems,
• Detection of ground faults of any type in compen-
for example using IEEE C37.94, and others), including
sated or isolated electrical power systems using the automatic switchover between ring and chain topolo-
following functions: 3I0>, V0>, fleeting contact, gy.
cos φ, sin φ, harmonic, dir.
• Reliable data transmission via PRP and HSR redundan-
• Detection of intermittent ground faults and admit- cy protocols
tance
• Extensive cyber security functionality, such as role-
• Ground fault detection using the pulse detection based access control (RBAC), protocolling security-
method related events or signed firmware
• Detection of current-transformer saturation for fast • Simple, quick and secure access to device data via a
tripping with high accuracy standard Web browser – without additional software
• Arc protection
• Phasor measurement unit (PMU) for synchrophasor
• Automatic frequency relief for underfrequency load measured values and IEEE C37.118 protocol
shedding, taking changed infeed conditions due to
• Time synchronization using IEEE 1588
decentralized power generation into consideration
• Powerful fault recording (buffer for a max. record
• Directional reactive power undervoltage protection
time of 80 sec. at 8 kHz or 320 sec. at 2 kHz)
(QU protection)
• Auxiliary functions for simple tests and commission-
• Detection of current and voltage signals up to the
ing
50th harmonic with high accuracy for selected protec-
tion functions (such as thermal overload protection) • Flexibly adjustable I/O quantity structure within the
and operational measured values scope of the SIPROTEC 5 modular system
• 3-pole automatic reclosing function Benefits
• Control, synchrocheck and switchgear interlocking • Safety due to powerful protection functions
protection
• Highest availability even under extreme environmen-
• Graphical logic editor to create powerful automation tal conditions by “conformal coating“ of electronic
functions in the device boards
• Single-line representation in small or large display • Powerful communication components warrant safe
• Integrated electrical Ethernet RJ45 for DIGSI 5 and and effective solutions
IEC 61850 (reporting and GOOSE) • High investment security and low operating costs due
• Up to 4 optional pluggable communication modules, to future-oriented system solutions
usable for different and redundant protocols
(IEC 61850, IEC 60870-5-103, IEC 60870-5-104, Mod-
bus TCP, DNP3 serial and TCP, PROFINET IO)

For all products using


security features of
OpenSSL, the
Siemens AG following shall apply:
Energy Management Division This product includes
Freyeslebenstraße 1 software developed
91058 Erlangen, Germany by the OpenSSL
Project for use in the
SIPROTEC 7SL86 Profile E7.8.docx OpenSSL Toolkit
(www.openssl.org),
Printed in Germany | © 09.18 Siemens AG cryptographic soft-
ware written by Eric
E-Mail: [email protected] Young
Tel: +49 180 524 70 00 ([email protected])
and software devel-
oped by Bodo
Moeller.

You might also like