BMW Motorrad

Dealer Development The Ultimate

and Training Riding Machine

Brief description

Engine and Powertrain

Frame and Suspension

Body

Specifications

The new BMW S 1000 RR

Technical Features in Detail

BMW Motorrad Training

 Introduction Page 4

Brief Description Page 5

Engine and Powertrain Highlights Page 7

Crankcase
Crankgear
Cylinder Head and Valve Gear
Lubrication
Cooling System
Gearbox
Oil-immersed Anti-Locking Clutch
Intake System
Variable Induction System
Exhaust System

Engine Management Ride-by-Wire Page 13

Pre-Injection
Fuel Pressure Regulation
A/F Control
Idle Speed Control
Crossover Tube Valves
Exhaust System Valve

Electrical System Hybrid Electrical System Page 16

Alternator and Starter
Instrument Cluster
Lighting System
Operation
Ride Mode Selection
Race ABS
Dynamic Traction Control “DTC”

Chassis and Suspension

Frame Page 21
Swinging arm
Suspension Strut
Telescopic Fork
Wheels and Brakes

Body
Design and Ergonomics Page 24
Handlebar and Cockpit
Rear View

Colours and Equipment Colours Page 26

Options
Accessories

Specifications Page 28

Table of Contents 
 Introduction

When BMW Motorrad introduces the S 1000 RR in December 2009,

fans of sports bikes across the world will witness new standards of motor-
cycle technology and performance. It is the only European supersports
bike with an in-line four-cylinder engine that meets the challenge of the
competition from the Far East.

The fact that the S 1000 RR as a supersports model is reflected in its

fascinating and innovative high tech design and the unprecedented
dynamism of its ride. Unparalleled riding properties combine with maximum
engine power and road performance to achieve an outstanding per­for­­-
m­ance package.

A rev-range of the newly developed 4-cylinder powerplant that just

doesn’t seem to end, an ergonomic yet sporty seating position which
benefits from plenty of suspension reserves, playful and nimble handing
and its low weight ensure a fantastic riding experience.

The new S 1000 RR is not only an outstanding supersports machine.

It displays virtues that BMW bikes have long been associated with;
innovative and detailed solutions which combine sheer riding pleasure
with exceptional levels of comfort and safety. The end product of this
meticulous attention to detail is a breath-taking addition to the supersports
scene and one that is already out-performing well established class
leaders.

Unique features such as Race ABS and Dynamic Traction Control (DTC)
together with four different riding modes ensure maximum safety under the
most demanding and variable riding conditions.

The S 1000 RR is the supersports bike that will redefine “The ultimate
Riding Machine” on public roads as well as on the racetracks of this world.

 S 1000 RR
 Brief Description

BMW Motorrad heralds its introduction allow the front end to split into two different
into the world of the supersports motorcycle ‘faces’, giving the bike a prominent and
with a product that challenges the compe­ unmistakable character. The centre part of
tition head-on and without compromise. the front fairing sports the central air inlet,
In order to succeed in this segment, a per- which aids the development of power on
formance package of exceptional quality is account of the ‘ram air’ effect created by
accepted as the designers starting point. the airflow. The 1,000 cc bike is visually set
High levels of top end power and a flexible apart by the slim fairing in conjunction with
yet versatile powerplant must be embraced a strongly upswept angular rear end that
by a dependable and responsive chassis. carries a pillion passenger seat. Wind slats
In order to provide maximum individuality, in the windshield ensure an airflow free from
riding dynamics and safety, additional rider turbulence and thus a high level of ride
assist systems such as Race ABS and comfort. The positioning of the attractive
Dynamic Traction Control (DTC) will support stainless steel exhaust system beneath the
the pilot in extreme riding situations. engine results in a low centre of gravity,
whilst at the same time ensuring extreme
The design philosophy of the S 1000 RR is banking angles combined with outstanding
unique. Front silhouette and lateral fairing handling.
panels are deliberately asymmetric and

Brief Description 
 Brief Description

The chassis of the S 1000 RR is respon­- Optimal brake performance is ensured by

sible for its unrivalled riding dynamics. two 320 mm brake discs at the front and a
The heart of the chassis is an aluminium 220 mm disc in the rear. The optional and
bridge-type tubular frame of only 11.98 kgs, newly developed Race Integral ABS features
which accommodates a powerplant that is several different operating modes.
inclined forward by 32 degrees, as a load-
bearing element. The front section of the The in-line four of the S 1000 RR is a
frame not only carries the steering head but completely new development. A displace-
also functions as the intake air duct for the ment of 999 ccs is achieved from a bore
engine. The rear frame section is manufac­ of 80 mm and a stroke of 49.7 mm. Its
tured of square aluminium sections and extremely oversquare bore & stroke ratio of
bolted to the main frame. The front wheel 0.621 is the basis for a high-performance
suspension is achieved by an upside down powerplant with top performance values.
fork with a stanchion diameter of 46 mm, The nominal horsepower output is 142 kW
supported in large ball bearings. Rebound at 13,000 rpm with a maximum torque rating
and compression damping as well as spring of 112 Nm, output at 9,750 rpm. With these
preload are easily adjusted with the help of specs, the powerplant of the S 1000 RR
numbers ranging from 1 to 10, making the establishes a new benchmark in the seg-
arduous counting of up to 30 ‘clicks’ of the ment of supersports 1,000 cc bikes. Versatile
competitors’ models a thing of the past. and responsive performance dynamics, a
The rear wheel is connected by a dual lever sporty character, compact dimensions and
swinging arm, with an effective length of the lowest possible weight, were the primary
593 mm and manufactured of aluminium. development targets for the new powerplant.
Spring and shock absorber function are With a weight of only 59.8 kgs, the engine
accommodated by a fully adjustable central of the S 1000 RR ranks among the lightest
suspension strut with settings ranging from 1,000 cc 4-cylinder engines in the compe­
1 to 10 available. The ride position may also titive environment.
be adjusted. Die-cast aluminium rims with an
intricate 10-spoke design carry a front tyre of BMW Motorrad also offers a wide range
120/70 profile, whilst the rear sports a profile of products for personalisation of the new
of 190/55. supersports bike.

 S 1000 RR
 Engine and Powertrain

The completely new developed 4-cylinder a short stroke of only 49.7 mm result in Highlights
powerplant of the S 1000 RR is the most a bore & stroke ratio of 0.621, allowing for a
powerful BMW production engine ever. maximum engine speed of 14.200 revs. With
this performance, the engine will accelerate
With a horsepower output of 142 kW at the bike from 0 to 100 km/h in as little as
13,000 rpm and a torque rating of 112 Nm 2.9 seconds and reach a top speed far in
at 9,750 rpm, it sits at the very top of the excess of 200 km/h. With only 59.8 kgs, the
league of supersports bikes. The cylinder powerplant is one of the lightest 1,000 cc
diameter of 80 mm in conjunction with units in the competitive environment.

Engine and Powertrain 

Engine and Powertrain

Crankcase The crankcase is horizontally split and liners are coated with wear-resistant and
manufactured of high-strength aluminium low-friction NiCaSil. The die-cast lower
alloy. The compact upper half is an crankcase half accommodates the crankshaft
extremely stiff die-casting that main bearings as well as the bearings for the
accommodates the four cylinders gearbox output shaft. The thin-walled die-
and the upper crankshaft bearing cast magnesium oil pan is bolted to the lower
halves. The light and compact 6- crankcase section. Magnesium covers close
speed gearbox is also integrated off the engine on the right-hand clutch side
into the upper and the left-hand alternator side. The top
crankcase half. of the powerplant is closed by the cylinder
The cylinder head that sports a valve cover manufactured
bank is inclined of lightweight magnesium.
32 degrees
forward and
features a water
cooling jacket in a so-called
closed-deck design for maxi-
mum stiffness. The cylinder

Crankgear The crankshaft of the S 1000 RR is a single- small end of the conrod does not feature
piece design forged from heat-treated steel. a bearing bush, but is equipped with two
It is supported in plain bearings and bores in the vertical axis that are offset by
features a traditional crank throw 45 degrees. These allow for lubrication of
of 180 degrees for uniform the gudgeon pin with splash oil. The 80 mm
firing intervals. The diameter forged lightweight full slipper pistons feature
of main and conrod bearing an extremely short piston skirt, sporting two
journals are both 34 mm. narrow compression rings and a three-piece
The cracked conrods oil scraper ring. The weight of the friction-
are supported in optimised pistons including gudgeon pin
plain bearings is only 253 grams. Spraying nozzles in the
and feature crankcase cool the piston crowns that are
a length of subject to very high thermal loads from
103 mm. They beneath.
weigh as little
as 334 grams
including the
plain bearing. The

 S 1000 RR
The performance and environmental charac- drive the camshafts, resulting in increased Cylinder head and
teristics, as well as the fuel consumption are precision of the valve timing and a reduc- Valve Gear
essentially determined by the cylinder head tion of the engine’s width on the level of the
and valve gear. The 16-valve cylinder head crankshaft. The transmission ratio used for
of the S 1000 RR was developed with the the countershaft in turn makes it possible to
focus on optimal port design, compact con- reduce the diameter of the cam sprockets,
figuration, and exceptional thermodynamics. another aid to achieving the extremely
The compact valve angle results in an ideal compact design of the cylinder head.
shape of the straight intake ports together
with a compact combustion chamber for Optimised valve springs together with a
high compression and optimal efficiency. hydraulic low-friction timing chain tensioner
contribute to the minimisation of the engine
The S 1000 RR sports a cam follower rotational drag and consequently to a further
valve gear with two overhead camshafts and performance increase.
compact, lightweight cam followers to
actuate the valves. Another special feature is The valve angle of the titanium valves is
the arrangement of the shafts for the intake 11.2 degrees on the intake and 13.3 degrees
and exhaust cam followers rearward of the on the exhaust side. The cylinder bore of
valves. This achieves a perfect combination 80 mm makes it possible to use large diam­
of stiffness and minimum weight for the eter valves that have a positive effect on the
moving parts of the valve gear, combined performance. The valve head diameter is
with a very compact design of the cylinder 33.5 mm on the intake and 27.2 mm on the
head. The valve clearance is adjusted via exhaust side with a valve stem diameter of
extremely small and lightweight shims, 5 mm for both. In the transition area to the
guided in the spring collars. The collars on valve seat insert, the intake ports sport an
the intake side are manufactured of a light- asymmetric finish to enhance the flow and to
weight aluminium fibre material and – thanks thus increase the cylinder charge for a higher
to their low oscillating mass – enable high horsepower output at high revs.
valve acceleration values. Cylinder head: Cylinder head:
The flat shape of the combustion chamber S 1000 RR K 1300 R
The two camshafts are made of heat and also the piston, combine to achieve
treated steel and arranged directly on top a very high compression ratio. With a com-
of the valves, driven by a toothed chain pression ratio of 13 : 1, the S 1000 RR’s
via a countershaft that rotates above the powerplant ranks at the very top of pro­
crankshaft. The countershaft helps to duction petrol engines.
shorten the timing chain that is used to

Engine and Powertrain 

Engine and Powertrain

Lubrication The lubrication system used on the lighter radiator and consequently reduction
S 1000 RR is a wet sump lubrication with of the coolant volume. The oil is conveniently
Eaton oil pump, the tried-and-proven checked via an oil sight glass located on the
solution widely used throughout this seg- left side of the engine beneath the alternator
ment. An oil cooler helps to keep the oil cover. The oil volume is 3.9 l including oil
temperatures low. It is aerodynamically filter. The engine spoiler features an aero-
integrated into the lower section of the dynamically designed air duct to cool the oil
fairing beneath the radiator. Utilisation of an pan.
oil cooler prevents undesirable additional
thermal loads on the coolant, thus allowing
for the utilisation of a more compact and

Cooling System An innovative cooling concept ensures The water pump is flanged to the right side
optimal thermal balance of the S 1000 RR’s of the engine and driven via a single-roller
powerplant. Coolant flows transversely chain from the gearbox input shaft, just as
through the cylinder head, with the cooled is the oil pump. The coolant (50 % water
coolant entering on the right side, i.e. on the and 50 % antifreeze) volume is as little as
hotter exhaust side. The intensive cooling 2.9 litres.
of the cylinder head is directed to the points
of highest thermal loads and thus a better The trapezoidally curved radiator is posi­
temperature balance for optimal perfor- tioned beneath the steering head, favourable
mance is achieved. from a centre of gravity as well as flow point
of view. On account of its high efficiency
and aerodynamic optimisation of the fairing
and airflow, a comparably small surface
area of only 955 cm2 reliably dissipates the
heat under all operating conditions. BMW
Motorrad has developed a patented concept
for the air routing to the radiator that ensures
maximum efficiency of the heat dissipation.
The perfect match for it is a comprehensively
computed and wind tunnel tested aero­
dynamic concept for optimal air extraction
from the fairing.

10 S 1000 RR
The constant mesh countershaft 6-speed The optionally available HP shift assistant – Gearbox
gearbox is a very compact and lightweight first introduced on the HP2 Sport – gives
unit. The gears are shifted via a lightweight the rider of the S 1000 RR the possibility
steel selector drum and shift forks with to upshift without the need to actuate the
3 contact points. Primary and secondary clutch and thus nearly without any inter­
shaft are compactly arranged on top of one ruption of the tractive power. During the gear
another for the shortest and most compact change, ignition and fuel injection will be
design possible. This compact overall design interrupted for fractions of a second.
length, allows for the utilisation of a long
rear swinging arm for superior traction. The
hollow selector drum (for reasons of
weight) is supported in roller bearings,
whilst the shift forks are manufactured
of steel and lubricated by pressurised
oil. The gears are straight cut and the
shifting dogs and recesses are undercut for
precise gear engagement.

The power is transmitted to the rear wheel

via a 525 O-ring roller chain, with the chain
routed through a shaft in the swinging arm.

The torque is transmitted from the The directional stability of the motor­cycle Oil-immersed Anti-
crankshaft to the oil-immersed anti-locking and thus its rideability is retained even Locking Clutch
clutch via a straight cut primary drive with a during the deceleration phase. The clutch is
ratio of 1 : 1.652. The clutch accommodates disengaged mechanically when coasting via
ten friction discs each with a diameter of a ramp-type sliding mechanism.
132.4 mm. With the so-called anti-locking
principle, only part of the engine’s braking The clutch is actuated via the clutch lever
torque will be transmitted to the rear wheel with a maximum force of 80 N. The actu­ating
while the engine is coasting. During severe force is transmitted to the release lever on
braking combined with a simultaneous the left side of the engine by a cable and
downshift, this prevents a brief locking and from there to the clutch pressure plate on
hopping of the rear wheel as a result of the the right engine side via a push rod. Saving
reduced load on the rear wheel caused by valuable weight was also possible in com-
the dynamic wheel load shift. parison with a hydraulic clutch actuating
mechanism.

Engine and Powertrain 11

Engine and Powertrain

Intake System Every bit of available space in the motorcycle and to the left and right of the steering head,
was made use of in order to provide as much directly to the vertical filter cartridge inside
volume as possible for the intake system. the air plenum. The ‘Ram Air’ effect creates
The intake plenum with its clean air volume an overpressure of up to 30 mbar within the
of 7.9 litres is accommodated directly above air plenum, dependent on the actual riding
the engine. The central air inlet is located speed, which results in an additional 4 kW
in the point of the upper fairing where of extra power at a speed of 250 km/h. The
the highest backpressure is encoun- air passage from the air inlet opening to the
tered – between the two steering head shaft is at the same time used
headlamps. From there, as carrier for the instrument cluster, rear
the intake air is view mirrors, headlamps and horn. This light-
routed along weight die-cast magnesium component thus
an ideal – substitutes various separate brackets and
i.e. straight – thus helps to save more weight.
path through
the steering
head shaft

Variable Induction System The S 1000 RR features a complex system air plenum varies the length of the intake
of variable intake trumpets to improve the trumpets in two steps, controlled by a spe­
torque curve. Dependent on the engine cific map.
speed, an actuator that is mounted on the

Exhaust system The exhaust system is designed for maxi- palladium coating, characterised by a high
mum performance. It is routed beneath the temperature resis­t­ance and a long service
engine for a lower centre of gravity. The life. The very compact rear silencer in turn
separate headers are collected in two tubes emphasises the slim design of the motor­
that enter a large pre-silencer with three cycle, whilst at the same time ensuring
chambers based on the principle of reflec- a superb banking clearance. The entire
tion. The exhaust flow is channelled through exhaust system is manufactured of high-
a short, lightweight and dynamically shaped grade stainless steel and weighs only
rear absorption silencer, which it exits at the 10.7 kgs. Due to this it is the most compact
rear. Two metal substrate catalytic converters exhaust system with exhaust emission
with a cell width of 100 cells per square inch controls available in this segment.
are accommodated immediately upstream
of the entrance of the headers into the
pre-silencer. They feature a rhodium-

12 S 1000 RR
 Engine Management

The S 1000 RR features the BMS-KP engine For example, it allows for a maximum torque
management system, further developed to output and a sensitive adaptation of the
cater for the various additional functions and engine operation during various riding con-
upgraded with a faster processor capability. ditions. The basis for control is the amount
A fully sequential, cylinder-selective fuel of air drawn in, indirectly determined via
injection system, electronic immobiliser, throttle angle and engine speed. Additional
integrated knock control, extremely fast engine and ambient parameters (among
processing of the comprehensive range of others engine temperature, air temperature,
sensor signals by state-of-the-art micro- barometric pressure) are used by the engine
electronics, a compact layout, low weight management system together with stored
and self-diagnosis capability are the most maps and correction factors to create indi-
important characteristics of this system. The vidually tailored values for injection quantity
torque-based engine management takes and ignition timing.
into account multiple individual variables.

Ride-by-wire or electronic accelerator The recording of all parameters in a torque Ride-by-Wire

is a system that actuates the throttle valves ‘map’ makes it possible to achieve optimal
via an electric actuator rather than by rideability in different riding conditions, up to
cables. An ‘open’ and ‘close’ throttle cable and including the interference of the Traction
is nevertheless still available to transmit Control. A mechanical linkage of the cable
the rider request to a rotary sensor. The sen- to the electronic actuator was also included
sor information is converted into a ‘torque on the S 1000 RR, which puts the rider in a
request’ signal by the engine management position to close the throttle valve under any
system and an electric actuator then moves circumstance.
the throttle valve to the required position.

Engine Management 13
Engine Management

Pre-Injection The injection system is fully sequential, the intake trumpet are used to inject the
which means that the fuel is injected indi­ amount of fuel required for an optimal cylin-
vidually into the intake port of the respective der charge. The injectors are activated either
cylinder exactly when that cylinder needs it. in combination or separately, dependent on
Four injectors on the throttle rail and above engine speed and power request.

Fuel Pressure Regulation The fuel supply is a non-return system is activated via a transistor with the system
that utilises a pressure sensor to deliver the pressure varying between 3 and 5 bar,
precise amount of fuel to the injectors that dependent on the power requested.
the engine actually requires. The fuel pump

A/F Control 2 oxygen sensors, located where cylinders management system will correct the quantity
1 & 2 and 3 & 4 merge, measure the com- injected into the respective cylinder in case
position of the exhaust gas. The engine of deviations.

Idle Speed Control The idle speed control and fast idle functions speed (fast idle) in case of a cold engine.
are realised via the electronically controlled This value is reduced to the actual idle speed
throttle valve unit. The engine management as the engine temperature increases.
system specifies a higher value for the idle

14 S 1000 RR
The exhaust system is equipped with two the two header tubes. This is used to timely Crossover Tube Valves
crossover tube valves, each located in a balance the vibrations of the exhaust gas
crossover tube for the two outer and inner mass flows in such a way that the exhaust
exhaust pipes. Being placed in the immedi- backpressure is reduced at the decisive
ate vicinity of the exhaust ports, these valves point in time to thus increase the cylinder
help create a uniform delivery of horsepower charge. This technology is unprecedented
and torque. Dependent on various map in a production motorcycle and essentially
variables, such as engine speed and throttle contributes to the high overall performance
valve position, an actuator will open or close of the S 1000 RR.
both valves to thus connect or disconnect

Compliance with the strictest noise and The throughput cross-section thus varied Exhaust System Valve
emission legislation combined with maxi- ensures a throaty sound in the low to
mum engine performance of the S 1000 RR medium rpm range, whilst the larger cross-
is – among others – achieved by an elec- section promotes maximum horsepower
tronically controlled exhaust system valve, output and a sporty sound at higher revs.
accommodated upstream of the rear silencer.
It makes available the optimal tube diameter
as the engine speed increases.

Engine Management 15
 Electrical System

Hybrid Electrical System As the name indicates, the electrical system helps to save weight and package space and
of the S 1000 RR consists of two combined is thus perfectly in line with the requirements
systems. This is a combination of the known of the supersports segment.
network of control units through CAN bus
technology with a conventional section that A targeted and rapid diagnosis is possible
accommodates fuses and relays. A maxi- using the BMW diagnostic systems – as
mum of 4 control units exchange information usual, with the BMS-KP taking over the func-
in the CAN network. BMS-KP control unit tion of ‘gateway’ for the diagnostic interface.
and instrument cluster are standard on all The S 1000 RR is equipped with a standard
bikes, additional ABS and/or Vehicle Theft 10 Ah AGM battery.
Alarm system control units can be added,
dependent on the options ordered. The use
of the ZFE (central vehicle electrical system)
control unit was refrained from on account of
the minimised range of available options and
accessories. Several functions such as turn
signals, headlamp control and fuel gauge
were integrated into the I-cluster control unit.
Other functions are realised conventionally
via wiring loom by way of switches, relays
and fuses. This intelligent solution

Alternator and Starter A reduced width, compact and most of all The 800 W countershaft starter is accommo-
lightweight design were the priority also for dated behind the cylinder bank in the upper
the arrangement of the electrical ancillary crankcase half and weighs 1,050 grams. It is
systems and their drives. The alternator with connected to the outboard left crank web –
permanent magnet excitation is thus located designed as a spur gear – via an overrunning
on the left-side crankshaft stub. It outputs clutch with a transmission ratio of 1 : 24.61.
434 W at 6,000 rpm and is designed to
handle a maximum engine speed of as much
as 16,000 rpm. The regulator / rectifier unit
was installed rearward of the powerplant.

16 S 1000 RR
The instrument cluster is equipped with a and time-dependent service indicator is Instrument Cluster
large and easy-to-read LCD display as well also integrated into the I-cluster. To reduce
as an analogue tachometer. Apart from the the load on the battery, a ‘light deactivation
vehicle speed and gear engaged, the display function’ is integrated, which switches off
also shows which mode of the four different the headlamp / high beam after 10 seconds
engine characteristics is currently selected. whenever the engine is not running. The
I-cluster is furthermore responsible for auto-
The instrument cluster of the S 1000 RR matic turn signal cancellation. As soon as
makes available a distinctly higher number a distance of 210 m has been covered and
of functions than usual in this vehicle seg- a time of >10 seconds elapsed, the flashers
ment. The rider may for instance, switch the will be deactivated. The hazard warning
display to the “Racetrack” mode and read flasher function is also the job of the I-cluster.
information on the current, fastest or last few For diagnosis and CIP applications, the
lap times. In conjunction with the optional lap vehicle order (priority 1), the VIN and the
trigger, precisely clocked laps are available date, mileage and time-of-the-day will be
for subsequent data analysis. An integrated saved in the I-cluster. The instrument cluster
shift lamp with adjustable frequency and used on the S 1000 RR is the lightest
brightness puts the rider in a position to application of its kind.
optimally approach the shift rpm. Another
function of the shift lamp is the possibility
to use it as an rpm display for racing starts.
Whenever the optimal engine speed is
reached – approx. 9,000 rpm – the shift
lamp will start flashing make an optimal
start possible.

The display in the I-cluster is also used

for displaying warning and information
messages. The function of the mileage

The asymmetric design of headlamp and simply by separating a connector and loos­ Lighting System
high-beam is adopted from Endurance ening three mounting screws.
racing. It follows the principle of maximum
effect combined with minimum weight. This LED turn signals are optionally available for
is the reason why the high-beam is distinctly further personalisation. The LED taillight with
smaller than the low-beam headlamp. clear glass look is standard. Utilisation of
LEDs instead of conventional bulbs ensures
The front turn signals are quickly removed a trouble- and maintenance-free operation
for the racetrack. The license plate carrier and extends the service life considerably.
including rear turn signals may be removed

Electrical System 17
 Electrical System

Operation The latest generation of handlebar switch­ Apart from being a unique facility in
gear are distinctly smaller and characterised the competitive environment it is practical
by a high level of functionality and conve- and enhances safety (rider’s right hand free).
nient ergonomics. The previously separated A toggle switch on the left side enables the
functions for left and right turn signals are Race ABS and DTC system; the mode for
now combined in a single function located the engine characteristics is selected via the
on the left side of the handlebar, reliably ‘mode’ switch on the right-side handlebar
preventing a mix-up of turn signals and horn. controls.
The hazard warning flasher is activated via
a separate easy-to-reach switch on the left
handlebar controls. The low- and high-
beam as well as flash-to-pass functions
are integrated into a single switch that is
conveniently reached by the left index finger.

Instrument cluster functions and settings are

accessed via the left handlebar switchgear.

Selecting the Ride Mode The rider has a choice of various ride in conjunction with a more spontaneous
“Rain” – “Sport” – modes to cater for a change in riding situa- throttle response. This ride mode is
“Race” and “Slick” tions, such as dry or wet road or racetrack. parti­cularly suitable for country roads.
Whenever the “mode” button is actuated,
the display in the I-cluster will alternate from The ‘Race’ mode in turn was specifically
“Rain” to “Sport” and on to “Race”. If the developed for utilisation of the S 1000 RR
rider simply pulls the clutch lever whenever equipped with street legal supersports tyres
the desired mode is displayed and rotates on the racetrack. The full engine power is
the twist grip to the idle speed position, a equally available, but the throttle response
different ride mode will be possible to select, will be extremely direct and noticeably more
even while riding. The mode last selected dynamic.
will remain active whenever the motorcycle
is restarted. The ‘Slick’ mode is exclusively intended
for use on the racetrack in conjunction with
When riding on wet tarmac and thus with treadless racing slicks. Similar to the “Race”
reduced grip, the ‘Rain’ mode reduces the mode, the full engine power will be available
maximum available horsepower output to together with maximum spontaneity of the
110 kW. A particularly uniform power and throttle response for racing or spins under
torque curve are additionally activated in this race-like conditions. The “Slick” mode
specific mode and the response of the may be activated only if a specific jumper is
engine as well as the power development installed in the respective connector of the
will be smoother. vehicle’s wiring loom, located beneath the
seat. If this jumper is in place, the pilot has
When riding on dry tarmac, the ‘Sport’ mode the choice of four different modes.
will enable the full engine power of 142 kW

18 S 1000 RR
The Race ABS of BMW Motorrad is an In the ‘Slick’ mode, the rider still has an Race ABS (optional)
entirely new development of a partial integral ABS system for both wheels at his disposal
system, which is again distinctly lighter than whenever the hand brake lever is actuated.
the previously used partial integral systems. Actuating the foot brake lever puts skilled
With a weight of as little as 1.6 kgs for riders in a position to ‘brake drift’ without
the control unit and a total weight of only having to refrain from the benefits of a front
2.5 kgs, it offers outstanding prerequisites wheel ABS.
for application in supersports bikes. Apart
from its low weight, the system is primar­ The pressure sensor integrated into the front
ily characterised by its enhanced control wheel control circuit will activate the stop
be­haviour. The utilisation of 4 pressure lamp and the pump whenever the hand brake
sensors results in an even more sensitive lever is actuated. The latter will then pump
response and control behaviour under the brake fluid through the open valve into the
most varying of operating conditions. A rear wheel circuit. The pressure set in the
complex rear wheel lift-off detection allows rear wheel circuit is monitored by a second
for differentiating between a road bump pressure sensor and set in accordance with
and a lifting rear wheel even better than the desired brake force distribution defined
was the case before. by the rider. The third pressure sensor in
the rear control circuit monitors the brake
Accordingly adapted characteristics are also pressure applied by the rider’s foot.
available for the Race ABS for different areas
of application such as wet tarmac (‘Rain’), The utilisation of a fourth pressure sensor
dry road (‘Sport’), racetrack with supersports in the front wheel circuit allows for a control
tyres (‘Race’) or racetrack with racing slicks of the front wheel brake pressure that was
(‘Slicks’), selected by the rider in the frame- further enhanced and is more sensitive than
work of the engine characteristics by a push that of the previously used BMW Integral ABS II.
of a button. These characteristics are com- This is achieved by comparing the actual
bined with the respective ride modes and pressure values in the control and wheel
comprehensively adapted to one another for brake circuits with one another. This also
maximum safety. makes the omission of pressure release
bores possible, which results in an optimal
Whenever the hand brake lever is actuated in action point and perfect modulation.
the ’Rain’ or ‘Sport’ mode, the front double All pressure sensors are integrated into the
disc brakes are activated, with only slight pressure modulator. The system layout
braking pressure built up in the rear wheel with integrated pressure sensors makes
brake. The foot brake lever activates the rear a separate stop lamp switch unnecessary.
wheel brake only. The Race ABS may also be deactivated
separately in all ride modes to cater for
In the ‘Race’ and ‘Slick’ modes, the rear specific requirements of the rider.
wheel lift-off detection does not intervene
with the rider’s request for deceleration. This
means that the rider may decelerate even
stronger on minor road bumps and with
sufficient traction of the bike.

Electrical System 19
 Electrical System

Dynamic Traction Control A Dynamic Traction Control system is In the ‘Rain’ mode for riding on wet tarmac,
“DTC” available as an option in conjunction with the the traction control will intervene quite early
(optionally available Race ABS. In view of the enormous power before the friction limit is reached in order to
only in conjunction with potential of the S 1000 RR, the DTC system provide maximum safety to the rider without
Race ABS) contributes impressively to overall perfor- sacrificing riding pleasure, even under the
mance and safety. most difficult road conditions.

It is specifically under varying conditions, In the ‘Sport’ mode, for example, when
tracks with low traction and sudden changes riding on dry roads, the traction control will
of the coefficient of friction that the new DTC intervene considerably later and in line with
system provides valuable support for the the distinctly higher friction values. In this
rider. It prevents undesirable spinning of the specific mode it allows for a safe and at the
rear wheel during acceleration and thus the same time sporty acceleration out of bends
loss of straight-line stability, which may result to provide maximum riding pleasure on
in the rear wheel breaking away and – in the public roads.
worst case – in a crash. A comparison of the
speed values of front and rear wheel via the In the ‘Race’ mode, the DTC is tuned more
ABS sensors and the data provided by the to approach the limit, taking into account a
banking angle sensor allow the system elec­- distinctly sporty riding style on the racetrack
tronics to detect a spinning rear wheel and with street legal sports tyres.
to trigger the respective reduction of the
engine power by backing off the ignition In the ‘Slick’ mode, the DTC is equally tuned
angle and intervening with the throttle posi­ to cater for racetrack applications, but takes
tion. Different from the previously used into account the distinctly higher adhesion
BMW Motorrad ASC systems, the DTC also values of treadless racing slicks as well as an
monitors the motorcycle’s banking angle accordingly more racing oriented riding style.
via a complex cluster of sensors and takes
it into account for its control behaviour. The DTC as well as the Race ABS my be
deactivated in all ride modes.
Dynamic Traction Control is also available
with the different ride modes of the engine
management system.

20 S 1000 RR
 Chassis and Suspension

The S 1000 RR offers innovative suspen­sion technology and countless road tests were
technology on the highest of levels for a employed to determine the ideal stiffness of
supersports performance. It’s not only maxi- the frame combined with minimum weight.
mum engine power that defines a super- The outstanding riding properties primarily
sports bike, it also has to have a chassis and result from the optimal position of the overall
suspension that is advanced enough to allow centre of gravity, a relatively steep steering
the rider to utilise the machine’s awesome angle of 66.1 degrees, and a short wheel
power. The slim design of the motorcycle castor of only 95.5 mm. The application of
in conjunction with its optimal ergonomic consistent lightweight design thus helped to
features are equally convincing, resulting create the lightest 1000 cc supersports bike
in a particularly positive and safe ride com- with ABS. Including ABS, the S 1000 RR
bined with excellent handling properties. weighs only 206.5 kgs with a full tank of fuel.
Computing models, simulations, CAD

The aluminium bridge-type tubular frame incorporates the rear engine mounts, swing­ Frame
weighs 11.98 kgs and utilises the power- ing arm bearings and brackets for footrests
plant as a load-bearing element. The frame and kinematics is a low-pressure die-casting.
is a welded design that is composed of The frame elements are welded together in
four individual castings. This design helped the BMW aluminium competence centre of
to succeed with the enormous challenge the Berlin plant by a high-precision robot.
encountered, when trying to realise a slim The rear frame section is a welded design
waistline as well as a large intake plenum. made of square aluminium sections, bolted
The steering head and the two lateral parts to the main frame in four positions. This in
with integrated engine mounts are tilt turn allows for optimal accessibility of the
castings, whilst the rear frame section that centrally mounted rear suspension strut.

Chassis and Suspension 21

Chassis and Suspension

Swinging arm The swinging arm has a total length of as little as 6.22 kgs. A shaft in the left side
593 mm and is one of the decisive design of the swinging arm routes the drive chain
factors when trying to deliver traction and to the sprocket. The lower cast shell inte-
grip from a bike with high engine power. grates all auxiliaries that are subject to high
Because of the short length of the mechanical loads, such as the pivot point
engine, the S 1000 RR features one of the kinematics system, swinging arm
of the longest swing arms in the bearings and rear wheel mounts. The broad
segment of supersports bikes. adjustment range of the rear axle of 45 mm
Three individual elements made allows for changing the position of the rear
of deep-drawn sheet aluminium axle by 17.5 mm towards the front and by
with a wall thickness of 2.5 mm together 27.5 mm towards the rear.
with the lower cast shell create a torsionally
rigid swinging arm body with a weight of

Suspension Strut The S 1000 RR sports a central suspen­ of which are positive and 40 mm negative
sion strut with adjustable compression and travel. Eccentric inserts in the upper strut
rebound damping and spring pre-load. It mounts make it possible to lift the rear end of
additionally allows for an adjustment of the the S 1000 RR by 10 mm at the strut mount
low speed damping (e.g. for extended road in order to adjust it to the individual require-
bumps) and high speed damping (e.g. in ments of the rider.
case of short jolts) of the compression. The
suspension strut is mounted in a compact
and lightweight kinematic system with an
overall suspension travel of 130 mm, 90 mm

Telescopic Fork The S 1000 RR comfortably meets the lowering the front end up to 5 mm and
extremely high requirements on ride raising it by as much as 10 mm. The inside
dynamics when it comes to front wheel of the upside-down fork sports so-called
guidance. An upside-down fork with a cartridge inserts, i.e. a separate hydraulic
generous stanchion diameter of 46 mm piston-cylinder system, and features adjust-
provides exceptional torsional rigidity. In ments for the spring preload as well as com-
comparison to the conventional 43 mm units, pression and rebound. The overall suspen-
this larger diameter ensures distinctly higher sion travel is 120 mm, 75 mm of which are
braking stability and greater feedback to positive and 45 mm negative travel. Settings
the rider. The forks are accommodated in from 1 to 10 are available for a simple adjust­
the steering head by two forged aluminium ment of spring preload, compression and
fork bridges. The steering shaft of the rebound. This makes the counting of ‘clicks’
bottom bridge is supported in two large as is otherwise required unnecessary and
roller bearings. The installed length of the the current setting may immediately be
sliders may be used to adapt the ride height verified. The compression and rebound
of the front end to the requirements of the adjustment are additionally colour-coded.
rider. The total length of 15 mm allows for

22 S 1000 RR
The die-cast aluminium wheels with ten Wheels and Brakes – front
intricate spokes emphasise the dynamic
overall impression of the S 1000 RR.
Maximum strength combined with the lowest
possible weight were the design priorities.
This is the reason why the area of the rim
hub was designed to directly accommodate
the brake discs. The front brake comprises
two floating 320 mm stainless steel brake
discs with a thickness of 5 mm. The brake
system is actuated via a radial master brake
cylinder with a diameter of 19.05 mm located
on the handlebar. The two radial Brembo
brake callipers each sport four 34 mm
diameter pistons as well as four symmetric
sintered metal brake pads. A 120/70 ZR 17
tyre is mounted on the 3.50"x17" rim.

The 6.00"x17" rear rim features the same Wheels and Brakes – rear
design and sports a 190/55 ZR 17 tyre.
The rear brake system consists of a 220 mm
fixed brake disc with sintered metal brake
pads and single-piston floating calliper. The
brake lines for the front and rear are made
of braided steel to provide a consistent lever
pressure. The sprocket transmits the drive
forces to the rim via an integrated torque
cushion.

Chassis and Suspension 23

 Body

Design and Ergonomics The S 1000 RR shares the unmistakable

design philosophy of BMW Motorrad.
Asymmetric sections, employed for the
design of the front end, giving it two ‘split
faces’ are typical design elements of BMW
Motorrad and used to give the S 1000 RR a
prominent and unmistakable character. This
asymmetric design not only pursues mere
design aspects, at the same time it meets
functional requirements. Whilst a large outlet
opening for the outflowing cooling air was
achieved on the left side, a very dynamic
‘gill’ look was created on the other. Guide
surfaces are equally integrated into the
engine spoiler, which optimise the airflow
to the radiator and oil cooler.

The transparent windshield is another func-

tional design component, with a patented
shape specifically arranged in the wind­- These asymmetric elements and technical
­shield to prevent undesirable turbulence. details distinctly set the S 1000 RR apart
The pressure that reaches the helmet and from its competitors and give it an extremely
upper body of the rider is thus pleasantly sporty appearance. The low contour front
low even at high speeds, resulting in the fairing together with the upswept angular tail
best wind protection section as well as the slender and dynamic
that is available in proportions of the bike create the impres­
this segment. sion of a muscular supersports motorcycle.

When it comes to the The S 1000 RR certainly sets new bench-

colour scheme, painted marks in the supersports segment regarding
elements alternate with design and performance. A comprehensive
dark vehicle components range of available options and accessories
in a very harmonious inter- provides the possibility to personalise the
play. The painted aluminium motorcycle according to the individual
fuel tank is ergonomically inte- requirements of its rider.
grated into the overall concept
and allows for excellent
knee contact and thus a
perfect integration of the
rider. Considerable focus was
put on balanced ergonomics, which
equally cater for the needs of short
and tall riders.

24 S 1000 RR
The rider’s cockpit is designed without trip mileage, includes a lap timer function Handlebar and Cockpit
compromise to provide a clear and func­tional with data recording for the last 10 laps, and
arrangement. All functions required for the a menu for various settings of the I-cluster.
operation of the electrical and electronic
components are clearly arranged and easily The lap timer is triggered via the high-
accessible. The operation of ABS, DTC, beam switch or the optional infrared lap
high-beam, horn, and turn signals is exclu- trigger. Only 2 screws need to be loosened
sively performed by the left hand. The right to remove the rear view mirrors for the race-
side sports the start/stop switch as well as track. The full aluminium tank with a capacity
the mode button for the selection of the ride of 17.5 litres makes a valuable contribution
modes. Clutch and brake lever are adjustable to save weight, since it weighs approx.
and clamped to the clip-on handlebars with a 1.5 kgs less than those of the competition.
split bracket, which makes them individually
adjustable and easy to replace. The I-cluster
displays the engine speed via a digitally con-
trolled rev counter. The central display shows
the road speed and the gear engaged in
large numbers together with the ride mode
selected / currently active. The right-hand
part of the display provides information on

The rear LED light combines the tail and Rear View
stop lamp functions and is integrated neatly
into the tail section. The appearance is as if
the S 1000 RR wants to show it’s ‘horns’ to
the traffic following. The license plate carrier
accommodates turn signals, reflector and
license plate illumination. The removal of
3 screws and the separation of a connector
is all it takes to remove the carrier for the
racetrack. The turn signals may also be retro-
fitted in an LED variant as an accessory.

Body 25
 Colours and Equipment

Colours Mineral silver metallic in combination

with ostra grey swinging arm and rims
create a highly technical and clear contrast,
making the S 1000 RR appear extremely
light, compact and dynamic without being
obtrusive.

The thunder grey metallic variant

pursues a different intention. It deliberately
refrains from strong contrasts and ensures
a compact and stocky appearance in
combination with swinging arm and rims
in ostra grey.

The S 1000 RR makes an unambiguous

statement of its sporty nature in striking acid
green metallic. Here, the contrast is again
very pronounced to impressively emphasise
the dynamic and sporty character of the bike.
With this colour variant, the swinging arm is
anodised in noble silver with the rims painted
in high-gloss black.

Available at an extra charge: The S 1000 RR

in a colour scheme that is based on that
of a superbike racer. The bike is finished in
modern solid alpine white, solid magma red
and lupin blue metallic. The swinging arm
is equally anodised in silver and the rims are
painted in high-gloss black.

26 S 1000 RR
n BMW Motorrad Race ABS n HP shift assistant Options (SA)
n Race ABS with Dynamic Traction Control n Vehicle Theft Alarm system incl. remote available ex factory
(DTC) control

n HP pillion passenger footrests n Tank bag Accessories (SZ) range

n HP clutch lever, folding n Rear bag
n HP brake lever, folding n Pillion seat cover in body colour
n HP carbon badge carrier left n Akrapovic® sports silencer
n HP carbon badge carrier right n Sports assembly stand
n HP carbon fuel tank trim left n Sports assembly stand, front
n HP carbon fuel tank trim right n Fork adapter front for assembly stand
n HP carbon chain guard n Swinging arm adapter for sports assembly
n HP carbon mudguard front stand
n HP carbon mudguard rear n Windshield tinted
n HP carbon pillion seat cover n Windshield high
n HP carbon engine spoiler n Windshield tinted high
n HP carbon heel protector n Crash sensor
n HP lap trigger n Retrofit VTA
n LU infrared receiver 2D n LED turn signals
n Infrared transmitter 2D

Colours and Equipment 27

 Specifications

Engine: Water/oil-cooled four-stroke in-line four-

Type cylinder with four valves per cylinder actuated
via cam followers, two overhead camshafts
and four titanium valves per cylinder
Horsepower output 142 kW @ 13,000 rpm
max. torque rating 112 Nm @ 9,750 rpm
Bore 80 mm
Stroke 49.7 mm
Effective displacement 999 cc
Bore/stroke ratio 0.621
Compression ratio 13 : 1
Fuel type premium plus unleaded
(95 – 98 octane incl. knock control)
Valve angle to cylinder axis Intake: 11.2º
Exhaust: 13.3º
dia. intake valve 33.5 mm
dia. exhaust valve 27.2 mm
Cam spread IN: 106° / EX: 105°
Valve timing, measured at 3 mm valve lift IN opens 2° BTDC
IN closes 34° ABDC
EX opens 22.5° BBDC
EX closes 10.5° BTDC
Valve lift (zero valve lash) IN 9.67 mm
EX 8.54 mm
Engine oil capacity 3.9 l
Oil filter external filter cartridge
Oil pumps 1 Eaton pump
Oil circuit operating pressure 3.5 – 5.5 bar

Engine cooling system: Oil/water cooling
Capacity 2.9 l
Thermostat opens at 85° C

Clutch: oil-immersed multi-plate anti-locking clutch,
mechanical actuation
Clutch plate dia. 132.4 mm
Drive discs 10
Actuation cable actuation, adjustable

Gearbox: sequential 6-speed gearbox with
straight-cut gears
Primary transmission ratio 1 : 1.652
Gear ratios 1st gear 1 : 2.6471
2nd gear 1 : 2.091
3rd gear 1 : 1.727
4th gear 1 : 1.500
5th gear 1 : 1.0360
6th gear 1 : 0.261

28 S 1000 RR
Final drive: O-ring chain
Transmission ratio 1 : 2.588
Number of teeth 44 : 17

Fuel preparation / Ignition system: BMW BMS-KP EU4 engine management
max. engine speed 14,200 rpm
Idle speed 1,270 rpm
A/F control above 9.75°
Deceleration fuel cut-off Engine temperature above 90°
Engine speed above 2,400 rpm
Fuel circuit pressure 3 to 5 bar, variable
Fuel tank capacity 17.5 l incl. approx. 4 l reserve
Ignition timing Map
Spark plug type NGK LMAR9D-J

Alternator: alternator with permanent magnet
Nominal rating (max.) 434 W
Max. regulated voltage 14.4 V
Transmission ratio 1:1

Starter: Electric motor with permanent excitation

Power output 0.8 kW

Battery: maintenance free AGM battery
12 V / 10 AH; 12 V / 12 Ah; 12 V 14 Ah

Electrical system: CAN bus electrical system, with fuses, w/o
central vehicle electrical system ZFE

Front wheel suspension: USD telescopic fork
Suspension travel at the wheel 120 mm
Stanchion diameter 46 mm
Steering head angle 66.1º
Steering angle 28° left/right
Adjustment compression and rebound adjustment via
scale from 1 to 10, spring preload and ride
position (delta 15 mm)

Rear wheel suspension: dual-lever swinging arm with
central suspension strut
Swinging arm length 593 mm
Suspension travel at the wheel 130 mm
Damper system central suspension strut
Adjustment compression, high and low speed
rebound, spring preload and ride position
(delta 10 mm)

Specifications 29
 Specifications

Wheels: cast aluminium wheel with 10-spoke design

Dimensions front 3.50" x 17"
Dimensions rear 6.00" x 17"

Tyres: sports tyres
Dimensions front 120/70 ZR 17
Dimensions rear 190/55 ZR 17

Braking system: hydraulic actuation
Option Race ABS, 4 modes may be selected /
deactivated
DTC, 4 modes may be selected / deactivated
front dual disc brakes, fixed radial 4-piston
callipers, disc mounted acc. to BMW
concept, stainless steel brake rotors
Brake disc diameter 320 mm
Brake disc thickness 5 mm
Piston diameter at brake calliper 34 / 34 mm
Piston diameter master brake cylinder (hand) 19.05 mm
Brake pad friction material sintered metal
rear single disc with 1-piston floating calliper
Brake disk diameter 220 mm
Brake disc thickness 5 mm
Piston diameter at brake calliper 34 mm
Piston diameter master brake cylinder (foot) 12.7 mm
Brake pad friction material sintered metal

Dimensions:
Overall length 2,056 mm
Overall width incl. mirrors 826 mm
Handlebar width w/o mirrors 707 mm
max. height with mirrors 1,138 mm
Wheelbase in normal position 1,432 mm
Castor in normal position 95.9 mm
Steering angle in normal position 66.1º
Seat height at dry weight 820 mm
Inside length of riders legs 1,810 mm

Weights:
Unladen weight with full fuel tank 204 kgs (206.5 kgs with ABS)
Dry weight 183 kgs
GVWR 390 kgs

Performance data:
Top speed > 200 km/h
Acceleration 0 – 100 km/h 2.9 sec
Average fuel consumption @ 5.7 l / 5.9 l
constant 90 km/h / 120 km/h

30 S 1000 RR
Printed in Germany
© 2009 BMW Motorrad, Munich / Germany
No part of this publication may be reprinted, neither partially nor wholly,
without the written authorisation of BMW Motorrad.
Responsibility for the contents: UX-VM-4, Alfred Kammerer, 10/2009