Scribd
Upload
255 views1 page

WPS Format For Asme Ix - Wps - Smaw

Welding procedure specification format ASME IX, AWS D1.1, BS EN ISO 15614-1 Read more: http://bit.ly/31v9NSh

Uploaded by

The Welding Inspections Community
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
255 views1 page

WPS Format For Asme Ix - Wps - Smaw

Welding procedure specification format ASME IX, AWS D1.1, BS EN ISO 15614-1 Read more: http://bit.ly/31v9NSh

Uploaded by

The Welding Inspections Community
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

The Welding Inspections Community

https://www.weldinginspections.net
[email protected]
WELDING PROCEDURE SPECIFICATION
(ASME SECTION IX – 2019 EDITION)
DESCRIPTION JOINT SKETCH
.1 WPS no.:
.2 Date of issue:
.3 Applicable code:
.4 Welding process:
.5 Supporting PQR no.:
JOINTS (QW-402)
.1 Groove design:
.4 Backing:
.10 Root spacing:
.11 Retainers:

BASE METALS (QW-403) POSITIONS (QW-405)


.5 Group no.: .1 Position:
.6 T limits: .3 Vertical welding:
.8 T qualified:
.9 Max. pass thick. <= 13 mm: PREHEAT (QW-406)
.11 P-no. qualified: .1 Min. preheat temperature:
FILLER METALS (QW-404) .2 Preheat maint.:
.4 F-No. .3 Max. inter-pass temperature:
.5 A-No. PWHT (QW-407)
.6 Diameter .1 PWHT temperature:
.7 Diameter > 6mm .2 T & T range:
.12 Spec. no. or Class.
.30 Max. deposit metal thick.
.33 Classification ELECTRICAL CHARACTERISTICS (QW-409)
.1 Heat input:
.4 Current & polarity:
.8 I & E range:
TECHNIQUE (QW-410)
GAS (QW-408) .1 String / weave
.1 Trailing or composition: .5 Method cleaning
.2 Single, mixture, or % .6 Method back gouge
.3 Flow rate .9 Multi to single pass/side
.5 Backing flow: .25 Manual or automatic:
.9 Backing or composition: .26 Peening:
.10 Shielding or trailing: .64 Use of thermal processes:

NOTES

WELDING PARAMETERS
Filler metal Energy of
Current & Ampere Travel speed
Layer Process Voltage range power Others
Class. Dia. polarity Range [mm/minute]
(range)
Root SMAW
Hot SMAW
Fill SMAW
Cap SMAW

Welding Engineer QA/QC Manager Third Party Client

You might also like