Scribd
Upload
54 views3 pages

Project Report Sem VII

This document is a project report submitted by a group of mechanical engineering students at the University of Mumbai for their seventh semester. It provides an introduction to and objectives of their project, conducted under the guidance of two professors. The report includes sections on literature review, methodology, current status at the end of the seventh semester, and guidelines for writing the project report.

Uploaded by

Pathik Shah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
54 views3 pages

Project Report Sem VII

This document is a project report submitted by a group of mechanical engineering students at the University of Mumbai for their seventh semester. It provides an introduction to and objectives of their project, conducted under the guidance of two professors. The report includes sections on literature review, methodology, current status at the end of the seventh semester, and guidelines for writing the project report.

Uploaded by

Pathik Shah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Project Report

Of

<Name of project Topic>

Bachelor of Engineering
Mechanical Engineering Department

Submitted By

<group member 1> Roll No / Student ID


<group member 2> Roll No / Student ID
<group member 3> Roll No / Student ID
<group member 4> Roll No / Student ID

University Of Mumbai

Academic Year 2018 -19

Semester – VII

Under The Guidance Of

<Guide Name> <Co-Guide Name>

A.P.SHAH INSTITUTE OF TECHNOLOGY


Opp. Hypercity Mall, Kasarvadvali, G.B. Road, Thane (W) – 400615
A.P.SHAH INSTITUTE OF TECHNOLOGY
Opp. Hypercity Mall, Kasarvadvali, G.B. Road, Thane (W) – 400615

Department of Mechanical Engineering

Certificate

This is to certify that Project Progress Report for Semester VII, is submitted by following
students of BE Mechanical Engineering of title..

<Name of project Topic>

Submitted By

<group member 1> Roll No / Student ID


<group member 2> Roll No / Student ID
<group member 3> Roll No / Student ID
<group member 4> Roll No / Student ID

University Of Mumbai

Academic Year 2018 -19

Semester – VII

Under The Guidance Of

<Guide Name> <Co-Guide Name>


Signature Signature
Report content…..

1. Title
2. Introduction ( not more than 2 pages)
3. Objective and scope of project in Detail ( max. 2 Pages)
4. Significance of project
5. Literature Survey ( 3 to 4 pages)
6. Methodology ( tools & technology, experimental set up ) ( 2- 3 pages)
7. Status at the end of VII sem.
(Table showing the activities, Planned Date, Current status, Completion
Date)
8. References

Guidelines For Writing Project Report

1. The Report should be in Latex (English- British, Font -Times Roman, Size-12
point) and printed on A4 size paper.

2. The Project report shall be printed on one side only with 1.5 space & with a
margin
2.54 cm on the left, 2.48 cm on the top, and 2.54cm on the right and at bottom.

3. In the Report, the title page [Refer sample sheet (inner cover)] should be given
first. This should be followed by index, notations/nomenclature etc.

4. The diagrams should be printed on a light/white background, Tabular matter


should be clearly arranged. Decimal point may be indicated by full stop(.)The
caption for Figure must be given at the BOTTOM of the Fig. and Caption for the
Table must be given at the TOP of the Table.

5. Report spiral bounded 2 copies to be submitted to department

General Instructions :
1. Additional sheets may be attached for diagrams, sketches, circuits etc.
2. Project log book ( Updated till date) duly signed by Guide and co-ordinator
should also be submitted along with project report to the Guide.

You might also like