Scribd
Upload
650 views2 pages

OTDR Calibration Form

This document summarizes the calibration of an OTDR meter against a reference meter. The meters were tested on parameters of distance and loss on a fiber pool at 1310nm. The meter under test read 592 meters distance and 0.64 loss, consistent with the reference meter within 0.03 deviation. The meter under test was calibrated by comparison method and is valid until its next scheduled calibration in February 2010.

Uploaded by

detmkcm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
650 views2 pages

OTDR Calibration Form

This document summarizes the calibration of an OTDR meter against a reference meter. The meters were tested on parameters of distance and loss on a fiber pool at 1310nm. The meter under test read 592 meters distance and 0.64 loss, consistent with the reference meter within 0.03 deviation. The meter under test was calibrated by comparison method and is valid until its next scheduled calibration in February 2010.

Uploaded by

detmkcm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Form No.

75

CALIBRATION of OTDR Meter


Reference Meter Meter under Test
Make :JDSU Make :ANDO
Model No. :MTS 6000 Model No. :AQ7250P
Sl. No. :06546 Sl. No. :31010508
Calibration Valid upto:17-10-2009 Date of Calibration :07.02.2009
Due date for next
Calibration :07.02.2010

Reference Meter Reading of Meter


Parameter Deviation Remarks
Reading under test

Calibrated
OTDR Distance 592meters 592meters
by
and loss of the Loss 0.61 at Loss 0.64 at 0.03
comparison
Fibre pool 1310nm 1310nm
method

Note: The parameters may be chosen as per the copy enclosed

Calibrated by :

Designation :
Form No.75

CALIBRATION of OTDR Meter


Reference Meter Meter under Test
Make : JDSU Make :
Model No. : MTS 6000 Model No. :
Sl. No. : 06546 Sl. No. :
Calibration Valid upto: 17.10.2009 Date of Calibration :
Due date for next
Calibration :

Reference Meter Reading of Meter


Parameter Deviation Remarks
Reading under test

NEW
METER
Calibrated
by JDSU
Company on
17.10.2008

Note: The parameters may be chosen as per the copy enclosed

Calibrated by : JDSU Company Engineer

Designation :

You might also like