Chapter 6 General

6 General
6.1 Specifications 6.3.7 NVM 744_Fusing Unit List
6.1.1 Product Name/Product Code/Serial No................................................................. 5 6.3.7 NVM 744_Fusing Unit List..................................................................................... 55
6.1.2 Configuration ......................................................................................................... 6
6.1.3 Operating Modes................................................................................................... 6 6.3.8 NVM 746_Xfer 1 List
6.1.4 Machine Sizes and Basis Weights ........................................................................ 7 6.3.8 NVM 746_Xfer 1 List ............................................................................................. 57
6.1.5 Installation Space .................................................................................................. 8 6.3.9 NVM 747_Xfer 2 List
6.1.6 Levelness .............................................................................................................. 10 6.3.9 NVM 747_Xfer 2 List ............................................................................................. 61
6.1.7 Operating Air Pressure.......................................................................................... 10
6.1.8 Electrical Specification .......................................................................................... 11 6.3.10 NVM 749_LPH List
6.1.9 Noise ..................................................................................................................... 11 6.3.10 NVM 749_LPH List.............................................................................................. 63
6.1.10 Installation Environment ...................................................................................... 12
6.1.11 Warm Up Time .................................................................................................... 13 6.3.11 NVM 750_Xero/Clean 1 List
6.1.12 FCOT................................................................................................................... 13 6.3.11 NVM 750_Xero/Clean 1 List................................................................................ 77
6.1.13 Print Speed.......................................................................................................... 14
6.3.12 NVM 751_Xero/Clean 2 List
6.1.14 Tray (Paper Feed) ............................................................................................... 16
6.3.12 NVM 751_Xero/Clean 2 List................................................................................ 79
6.1.15 Tray Size Factory Settings .................................................................................. 17
6.1.16 Classifications and Functions.............................................................................. 17 6.3.13 NVM 752_Process Control 1 List
6.1.17 Auto 2 Sided Printing........................................................................................... 19 6.3.13 NVM 752_Process Control 1 List ........................................................................ 97
6.1.18 Output Function................................................................................................... 19
6.1.19 Resolution/Gradation........................................................................................... 20 6.3.14 NVM 753_Process Control 2 List
6.1.20 Image Loss.......................................................................................................... 20 6.3.14 NVM 753_Process Control 2 List ........................................................................ 129
6.1.21 Print Area ............................................................................................................ 21
6.1.22 Alignment Specification ....................................................................................... 21
6.3.15 NVM 755_Process Control 4 List
6.3.15 NVM 755_Process Control 4 List ........................................................................ 149
6.1.23 I/F specification ................................................................................................... 23
6.1.24 Print Feature........................................................................................................ 23 6.3.16 NVM 759_Registration Control 1 List
6.1.25 Scan Feature Specifications................................................................................ 24 6.3.16 NVM 759_Registration Control 1 List .................................................................. 165
6.1.26 Fax functions ....................................................................................................... 24
6.1.27 Document Feeder (DADF) .................................................................................. 25 6.3.17 NVM 760_Registration Control 2 List
6.1.28 Duplex Kit ............................................................................................................ 25 6.3.17 NVM 760_Registration Control 2 List .................................................................. 169
6.1.29 One Tray Module (Optional)................................................................................ 26
6.1.30 Billing Counter ..................................................................................................... 26 6.3.18 NVM 761_Deve 1 List
6.3.18 NVM 761_Deve 1 List ......................................................................................... 171
6.2 Tools/Service Consumables/Consumables
6.2.1 Tools and Service Consumables........................................................................... 29 6.3.19 NVM 762_Deve 2 List
6.2.2 Consumables ........................................................................................................ 29 6.3.19 NVM 762_Deve 2 List ......................................................................................... 173

6.3.3 NVM DADF 6.3.20 NVM 767_Marking System 1 List

6.3.3 NVM DADF............................................................................................................ 31 6.3.20 NVM 767_Marking System 1 List ........................................................................ 179

6.3.4 NVM IIT 6.3.21 NVM 980_Marking System 2 List

6.3.4 NVM IIT ................................................................................................................. 35 6.3.21 NVM 980_Marking System 2 List ........................................................................ 181

6.3.5 NVM 740_IOT Manager List 6.3.22 System_Data (FAX Service)

6.3.5 NVM 740_IOT Manager List.................................................................................. 39 6.3.22 System Data (FAX Service) ................................................................................ 183

6.3.6 NVM 742_Paper Handling List 6.4 CE Mode

6.3.6 NVM 742_Paper Handling List .............................................................................. 41 6.4.1 CE Mode Overview ............................................................................................... 195
6.4.2 How To Enter the CE Mode .................................................................................. 195

Version 1.1 05/2014

6-1
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-2

6.4.3 Overview of the CE Mode Operation..................................................................... 196 6.4.11.25 ToneDown [Y] 10P ......................................................................................... 240
6.4.4 How to Exit the CE Mode ...................................................................................... 196 6.4.11.26 ToneDown [K] 10P ......................................................................................... 240
6.4.5 Menu Tree ............................................................................................................. 197 6.4.11.27 Calibration Chart ............................................................................................ 241
6.4.6 CE Mode Functions Overview ............................................................................... 199
6.4.12 Parameter
6.4.7 ESS Diag 6.4.12.1 Initialization (Life) and the display of life counter ............................................. 243
6.4.7.1 All Test................................................................................................................ 203 6.4.12.2 Life Print ........................................................................................................... 245
6.4.7.2 Flash ROM Test ................................................................................................. 204 6.4.12.3 Procon Print ..................................................................................................... 246
6.4.7.3 EEPROM Test .................................................................................................... 205 6.4.13 RTC Set .............................................................................................................. 247
6.4.7.4 DRAM Test ......................................................................................................... 205
6.4.7.5 MAC+PHY Test .................................................................................................. 206 6.4.14 Board Test
6.4.7.6 ASIC Test ........................................................................................................... 206 6.4.14.1 All Test ............................................................................................................. 249
6.4.7.7 IOT Test.............................................................................................................. 207 6.4.14.2 Fax Memory Test ............................................................................................. 249
6.4.7.8 RTC Test ............................................................................................................ 207 6.4.14.3 I/F Test ............................................................................................................. 250
6.4.14.4 Fx Chip Test..................................................................................................... 250
6.4.8 IOT Diag 6.4.14.5 Relay/Signal Test ............................................................................................. 251
6.4.8.1 Digital Input......................................................................................................... 209
6.4.8.2 Digital Output...................................................................................................... 211 6.4.15 Information
6.4.8.3 Analog Input ....................................................................................................... 213 6.4.15.1 Scan Counter ................................................................................................... 255
6.4.8.4 NVM Setting ....................................................................................................... 214 6.4.16 Scanner Maintenance
6.4.8.5 Clear IOT NVM ................................................................................................... 216 6.4.16.1 Scan Counter Clear.......................................................................................... 257
6.4.9 Print Info 6.4.16.2 Auto Shading.................................................................................................... 258
6.4.9.1 Print Printer Configuration Data Config Page..................................................... 219 6.4.16.3 CVT Auto Shading (Color) ............................................................................... 259
6.4.9.2 Print Settings (Print Printer Settings Data) ......................................................... 220 6.4.16.4 CVT Auto Shading (Gray) ................................................................................ 260
6.4.10 Installation Settings ............................................................................................. 221 6.4.16.5 LED Caliblation ................................................................................................ 261
6.4.16.6 Component Check (IIT).................................................................................... 262
6.4.11 Test Print 6.4.16.7 DADF Component Check................................................................................. 263
6.4.11.1 Printing function test operation procedure........................................................ 227 6.4.16.8 DADF Size Detect Auto Adj. ............................................................................ 265
6.4.11.2 TotalChart ESS................................................................................................. 228 6.4.17 Parameter (System Data Setting) ....................................................................... 266
6.4.11.3 HT Cyan ESS ................................................................................................... 228 6.4.18 Backup Data........................................................................................................ 267
6.4.11.4 HT Magenta ESS.............................................................................................. 229
6.4.11.5 HT Yellow ESS ................................................................................................. 229 6.5 Panel Diag
6.4.11.6 HT Black ESS................................................................................................... 230 6.5.1 Diagnosis Function Overview................................................................................ 269
6.4.11.7 HT CMY ESS.................................................................................................... 230 6.5.2 Switch to Panel Diag Mode ................................................................................... 269
6.4.11.8 HT CMYK ESS ................................................................................................. 231 6.5.3 Panel Diag Menu................................................................................................... 270
6.4.11.9 HT Red ESS ..................................................................................................... 231 6.5.4 Memory Test ......................................................................................................... 270
6.4.11.10 HT Green ESS................................................................................................ 232 6.5.5 Hardware Key Test ............................................................................................... 271
6.4.11.11 HT Blue ESS .................................................................................................. 232 6.5.6 Adjust Touch Screen Test..................................................................................... 272
6.4.11.12 Grid2 ESS....................................................................................................... 233 6.5.7 Touch Screen Test................................................................................................ 273
6.4.11.13 Gradation ESS................................................................................................ 233 6.5.8 LED Test ............................................................................................................... 273
6.4.11.14 No Image IOT ................................................................................................. 234 6.5.9 Buzzer Test ........................................................................................................... 274
6.4.11.15 Procon OFF ESS............................................................................................ 234 6.5.10 Brightness Test ................................................................................................... 274
6.4.11.16 Procon ON ESS.............................................................................................. 235 6.5.11 Display Test ........................................................................................................ 275
6.4.11.17 LPH Chart LM1............................................................................................... 235 6.5.12 Adjust Sense of Touch ........................................................................................ 276
6.4.11.18 LPH Chart IBY ................................................................................................ 236 6.6 Fax Related Information
6.4.11.19 ToneUp [C] 5P................................................................................................ 237
6.6.1 Activity Report (User Mode) .................................................................................. 277
6.4.11.20 ToneUp [M] 5P ............................................................................................... 237 6.6.2 Activity Report (CE Mode)..................................................................................... 277
6.4.11.21 ToneUp [Y] 5P ................................................................................................ 238
6.6.3 Protocol Monitor .................................................................................................... 278
6.4.11.22 ToneUp [K] 5P ................................................................................................ 238
6.4.11.23 ToneDown [C] 10P ......................................................................................... 239 6.6.4 Protocol Trace
6.4.11.24 ToneDown [M] 10P......................................................................................... 239 6.6.4.1 Protocol Trace.................................................................................................... 280
6.6.4.2 FCF/FIF Description ........................................................................................... 281
6.6.4.3 Bit 7 Description ................................................................................................. 281
6.6.4.4 Bit 6 Description ................................................................................................. 282
6.6.4.5 Bit 16 Description ............................................................................................... 282
6.6.4.6 Bit 15 Description ............................................................................................... 283
6.6.4.7 Bit 14~11 Description ......................................................................................... 283
6.6.4.8 Bit 10 Description ............................................................................................... 284
6.6.4.9 Bit 9 Description ................................................................................................. 284
6.6.4.10 Bit 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112 Description ....................... 285
6.6.4.11 Bit 21~23 Description ....................................................................................... 285
6.6.4.12 Bit 19, 20 Description ....................................................................................... 286
6.6.4.13 Bit 17, 18 Description ....................................................................................... 286
6.6.4.14 Bit 31 Description ............................................................................................. 287
6.6.4.15 Bit 28 Description ............................................................................................. 287
6.6.4.16 Bit 27 Description ............................................................................................. 288
6.6.4.17 Bit 26 Description ............................................................................................. 288
6.6.4.18 Bit 25 Description ............................................................................................. 289
6.6.4.19 Bit 1, 3, 33~38, 47, 49~51, 53~55, 57, 59, 60, 62, 65~71, 73~75, 81~84, 87, 92~95, 97~99, 101,
102 Description ............................................................................................................... 289
6.6.4.20 Bit 46 Description ............................................................................................. 290
6.6.4.21 Bit 45 Description ............................................................................................. 291
6.6.4.22 Bit 44 Description ............................................................................................. 291
6.6.4.23 Bit 43 Description ............................................................................................. 292
6.6.4.24 Bit 42 Description ............................................................................................. 292
6.6.4.25 Bit 41 Description ............................................................................................. 293
6.6.4.26 Bit 79 Description ............................................................................................. 293
6.6.4.27 Bit 78 Description ............................................................................................. 294
6.6.4.28 Bit 77 Description ............................................................................................. 294
6.6.4.29 Bit 76 Description ............................................................................................. 295
6.6.4.30 Bit 105~109 Description ................................................................................... 295

6.6.5 Super G3 Fax

6.6.5.1 Super G3 Fax ..................................................................................................... 297
6.6.5.2 V.8 CM/JM Signal............................................................................................... 298
6.6.5.3 V.8 Operation / Auto Send ................................................................................. 299
6.6.5.4 V.8 Operation/Manual Send ............................................................................... 300
6.6.5.5 Troubleshooting of Super G3 Fax ...................................................................... 300

Version 1.1 05/2014

6-3
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-4
6.1.1 Product Name/Product Code/Serial No. 6.1.1.1 Main Unit

Table 1
CPM
Destination Product Name Model Configuration (Color/Mono) XJ Code Product Code Serial No. Note
FXCL DocuCentre SC2020 Modle-CPS CPS + USB/NET 20/20 BU2 TC100822 100001~140000 Platen, Simplex
FXCL DocuCentre SC2020 Model-CPS DA CPS + USB/NET 20/20 BU3 TC100823 140001~180000 DADF, Duplex
ENG DocuCentre SC2020 Model-CPS DA CPS + USB/NET 20/20 BU4 TC100824 180001~220000 DADF, Duplex

6.1.1.2 Options Table 2

Model- Model-
Optional Product Name Product Code Remarks CPS CPS DA
Table 2 Power Cord (FXS/FXM/ EL200491 Mandatory Option for FXS/FXM/FXHK
Model- Model- FXHK)
Optional Product Name Product Code Remarks CPS CPS DA Power Cord (FXV/AG) EL200492 Mandatory Option for FXV/AG
Options Power Cord (FXP) EL200493 Mandatory Option for FXP
DADF EL201034 Installed by CE Option Std Power Cord (FXTH) EL200915 Mandatory Option for FXTH
Duplex EC102679 Installed by CE Option Std Power Cord (FXK) EL200522 Mandatory Option for FXK
Fax Kit EC102680 Installed by CE Option Option
One Tray Module EC102681 Installed by CE Option Option
Tray Lock EL201058 Installed by CE Option Option
Absolute Requirement for English version
Localize pack for Eng EC102682 Installed by CE
Mandatory Option for English using customer -Basic
Operation Guide (English),-Label to attach around
platen glass by CE
Localize pack for KO EC102683 Installed by CE
Mandatory Option for Korean using customer -Basic
Operation Guide (Korean),-Label to attach around
platen glass by CE, -Korean Energy mark, -Korean Eco
mark, -UI localized label (Meaning of Pictograph)
Localize pack for VI EC102684 Installed by CE
Mandatory Option for Vietnamese using customer -
Basic Operation Guide (Vietnamese),-Label to attach
around platen glass by CE, -UI localized label (Meaning
of Pictograph)
Localize pack for TH EC102685 Installed by CE
Mandatory Option for Thai using customer -Basic Oper-
ation Guide (Thai),-Label to attach around platen glass
by CE, -UI localized label (Meaning of Pictograph)
Localize pack for ID EC102686 Installed by CE
Mandatory Option for Indonesian using customer -Basic
Operation Guide (Indonesian),-Label to attach around
platen glass by CE
Power Cord (FXA/FXNZ) EL200490 Mandatory Option for FXA/FXNZ

Version 1.1 05/2014 6.1.1 Product Name/Product Code/Serial No.

6-5
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-6 6.1.2 Configuration

6.1.2 Configuration 6.1.3 Operating Modes

This IOT is a color print engine that uses the tandem type electro-photographic method with LED print The following 4 operating modes are available.
head. The output performance of one side plain A4LEF and 8.5x11" LEF paper run at the time in color/
black-and-white is 20/20ppm. The resolution of the IOT Engine is 1200x2400dpi. Table 1
Mode Status
This IOT forms a Multi-Function System in combination with the System Controller, UI, IIT, and DADF.
Running Mode The data receiving/image creation/recording (printing) operation mode
6.1.2.1 IOT Overview Ready Mode When the system can enter the Running Mode immediately
Low Power Mode The mode that reduces the power consumption more than the Ready Mode
Table 1 Sleep Mode *1 The mode that reduces the power consumption further more than the Low
Item Contents Power Mode
Photoreceptor Type OPC
Photoreceptor Diameter 30 mm in diameter *1 Applies to the International Energy Star Program.

Development Method (1 component, 2 com- Dry bicomponent development method

ponents, etc.)
6.1.3.1 IOT States
The IOT systems are in the following states in each mode.
Toner component (crush method, polymeriza- Polymerization method (EA-ECO toner), 5.8
tion method) Micro-m (C, M, Y, K)
Table 2
Exposure System LED type (LPH)
Running Mode Ready Mode Low Power Mode Sleep Mode
Transfer Method (charger, etc.) Intermediate Belt Transfer (IBT) method
Fusing System Thermal pressure fusing method by Heat Roll Fusing System Maintaining the Maintaining the Maintaining at low Stop state
(belt nip method) (Fusing Unit) operating temper- standby temperature temperature
Cleaning Method Xero: Blade system Transfer: Blade system ature
Recording System Operating state Stop state Stop state Stop state
(Transfer/Develop-
ment)
Exposure system Operating state Stop state Stop state Stop state
(LPH)
Fusing unit FAN Rotate (High Temperature control in Temperature control in Stop state
speed) Stop or Rotate (slow) Stop or Rotate (slow)
ESS (Reference) Operating state Standby Standby Ready to
receive
6.1.4 Machine Sizes and Basis Weights • Platen unit body (DC SC2020 Model-CPS)
Machine Size (W x D x H): 595mm x 586mm x 549mm (Figure 1)
The following are the sizes and weights of the individual products:(excluding toner)

6.1.4.1 Machine Sizes

Projecting sections such as label recesses are not included. The sizes are for when the Bypass Tray is
minimized.

The tolerance is +/-5 mm.

Platen glass top height is 515 mm. Optional STM mounting 28 mm.

Table 1
Configuration Machine Size (mm) *1
Product
Configuration UI IN Tray Module OUT Width *2 Depth Height *3
Basic Model 1 "4.3"WQ PLTN Tray1+MSI Output 595 586 579
Basic Model 2 VGA Tray1+MSI+STM Tray 595 586 662
body
Figure 1 j0bs60001
Basic Model 3 DADF Tray1+MSI Output 595 586 634
Basic Model 4 Tray1+MSI+STM Tray 595 586 747 2. Basic Model 2
body
• Platen unit body (DC SC2020 Model-CPS) + STM (Option)
Machine Size (W x D x H): 595mm x 586mm x 662mm (Figure 3)
*1: For details on the machine sizes, refer to 6.1.4.3.

6.1.4.2 Machine Weights

Measurement Conditions:
Do not include Options, Paper, and New Toner Cartridges.
Include power cord.

Table 2
Configuration Main Unit Weight
IOT(PLATEN/IIT/Tray1) 43.0 kg or lighter
IOT(DADF/IIT/Tray1/Dup) 48.5 kg or lighter
DADF 6.5 kg or less
PLTN Cover 1.5 kg or less
STM 11 kg or less
Dup Unit 3.6 kg or less
FAX 0.3 kg or less Figure 2 j0bs60003

3. Basic Model 3
Max Floor Weight Capacity (Reference value): 71kg
• DADF unit body (DC SC2020 Model-CPS DA)
= Body + DADF + DUP + STM + FAX + Toner 4 + margin (Paper Tray full set)
Machine Size (W x D x H): 595mm x 586mm x 634mm (Figure 2)

6.1.4.3 Detailed Machine Sizes

1. Basic Model 1

Version 1.1 05/2014 6.1.4 Machine Sizes and Basis Weights

6-7
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-8 6.1.5 Installation Space

6.1.5 Installation Space

6.1.5.1 Installation Space
In order to perform paper loading, replacement of consumables, jam fixes, maintenance/inspection work,
M/C ventilation and other tasks, there should be enough open space around the machine.

Table 1
Configuration Width (mm) Depth (mm) Area (square meters)
Platen unit body (DC SC2020 Model-CPS) 1101 1498 1.65
DADF unit body (DC SC2020 Model-CPS 1101 1498 1.65
DA)
DADF unit body + STM (DC SC2020 Model- 1101 1503 1.66
CPS DA)

• Width: The max. width with the MSI Tray pulled out is 326mm.
Figure 3 j0bs60002 • Depth: The depth with the Tray pulled out is 998mm. (Including the Front Cover)

4. Basic Model 4
The installation space includes the following working space.
• Platen unit body (DC SC2020 Model-CPS DA) DADF + STM (Option)
Machine Size (W x D x H): 595mm x 586mm x 747mm (Figure 6) • Width: 80 mm added to the left and 100 mm added to the right
• Depth: 400 mm added to the front (for pulling out of Tray) and 100 mm added to the back (for air cir-
culation)

6.1.5.2 Occupied Space

The occupied space may include a fully extended Bypass Tray and Output Tray.

Table 2
Configuration Width (mm) Depth (mm) Area (square meters)
Platen unit body (DC SC2020 Model- 947 586 0.55
CPS)
DADF unit body (DC SC2020 Model- 972 586 0.57
CPS DA)
DADF unit body + STM (DC SC2020 972 586 0.57
Model-CPS DA)
Figure 4 j0bs60004
6.1.5.3 Installation Space Details
1. Platen unit body (DC SC2020 Model-CPS)
• Installation Space (W x D): 1101 mm x 1498 mm (Figure 1)
 Figure 1 j0bs60005 Figure 3 j0bs60007

2. DADF unit body (DC SC2020 Model-CPS DA)

• Installation Space (W x D): 1101 mm x 1498 mm (Figure 2)

Figure 2 j0bs60006

3. Platen unit body (DC SC2020 Model-CPS DA) DADF + STM (Option)
• Installation Space (W X D):1101mm x 1503 mm (Figure 3)

Version 1.1 05/2014 6.1.5 Installation Space

6-9
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-10 6.1.6 Levelness

6.1.6 Levelness 6.1.7 Operating Air Pressure

As long as the machine is placed horizontally and the maximum difference under the M/C Cabinet (Cast- The machine operates normally between 0 to 2,500 m (0 to 8,200 feet).
ers) is within 5 mm between all the front, the rear, the right, and the left, there should not be any interfer-
ence with its performance. However, when the altitude exceeds 1,000m, an adjustment in the field may be required.
6.1.8 Electrical Specification 6.1.9 Noise
Specifies the power supply operating voltage/frequency and the power consumption. The noise levels during the product model evaluation are the following values or lower. If there is a 60 Hz
M/C, perform it using the 60 Hz M/C.
6.1.8.1 Power Supply Operating Voltage and Frequency
Possessing an electric configuration that is applicable to the following power supply specifications: The measurement is based on the ISO7779.

Table 1
Table 1
20/20 IOT BW mode
Applicable Area Source Voltage (V) Frequency (Hz) Item
APO/GCO 220-240+/-10% 50/60 +/-3% Body *1 Full System*2
Mea- Target Mea- Target
6.1.8.2 Maximum Power Consumption sured Value sured Value
Value Value
The maximum power consumptions with full system are as shown in the following table.
Surrounding A characteristic noise power level during 3.17 3.30 3.20 3.30
Standby (Unit: B) *3
Table 2
Surrounding A characteristic noise power level during 6.47 6.51 7.03 7.07
Power Consumption operation (Unit: B) *3
Applicable Area Voltage (V) (kW)
Surrounding A characteristic projection noise pressure 15.0 - 15.0 -
APO 220 to 240V 220V: 1.1 or less level during Standby (Reference value)
240V: 1.2 or less (Bystander position) (Units: dB) *4
Surrounding A characteristic projection noise pressure 49.9 - 54.0 -
level during operation (Reference value)
(Bystander position) (Units: dB) *4
Non-duplex models 3.17*6 3.30*6 - -
Surrounding A characteristic noise power level during
standby (reference value)
(Unit: B) *3
Non-duplex models 6.29*6 6.41*6 - -
Surrounding A characteristic noise power level during
operation (reference value)
(Unit: B) *3

Table 2
20/20 IOT F/C mode
Item
Main Unit*1 Full System*2
Mea- Target Mea- Target
sured Value sured Value
Value Value
Surrounding A characteristic noise power level during 3.17 3.30 3.20 3.30
Standby (Unit: B) *3
Surrounding A characteristic noise power level during 6.50 6.52 6.76 7.07
operation (Unit: B) *3
Surrounding A characteristic projection noise pressure 15.0 - 15.0 -
level during Standby (Reference value)
(Bystander position) (Units: dB) *4

Version 1.1 05/2014 6.1.8 Electrical Specification

6-11
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-12 6.1.10 Installation Environment
Table 2 6.1.10 Installation Environment
20/20 IOT F/C mode This machine can be operated under the following conditions:
Item
Main Unit*1 Full System*2
• Temperature: 10 degree C to 32 degree C
Surrounding A characteristic projection noise pressure 50.0 - 51.7 -
• Humidity: 15 to 85% (with no condensation)
level during operation (Reference value)
• Altitude: 0 to 2,500 m
(Bystander position) (Units: dB) *4
Non-duplex models 3.17*6 3.30*6 - -
Surrounding A characteristic noise power level during
standby (reference value)
(Unit: B) *3
Non-duplex models 6.29*6 6.42*6 - -
Surrounding A characteristic noise power level during
operation (reference value)
(Unit: B) *3

*1: Main Body Config: IOT+DUPLEX

*2: Full SYSTEM CONFIG: Main Unit + Option *5

*3: LwAd: Surrounding A characteristic power level = measured LwA (1 device) + 0.3 B

*4: LpAm: Surrounding A characteristic projection noise pressure level (Bystander position)

*5: DADF, STM etc. that is set as option

*6: No duplex
6.1.11 Warm Up Time 6.1.12 FCOT
The time required before a print operation can be performed after the power is turned on is as follows. <Definition>

Table 1 The time that is required since the <Start> button is pressed until the trail edge of paper is output to the
Measurement Rated at 20 degrees C/65% RH. defined output destination.
Conditions Toner Recovery and Setup Cycle are not included.
Power ON after seasoning when the power has been OFF for 3 hours or longer. The measurement result is rounded to the first decimal place.
Basic Configura- Standard Main Unit
• Prerequisite
tion

Table 1
Table 2
Item Contents
Configuration Immediately after main power is turned ON*1
Document/Paper Size/Orienta- A4 LEF Document, A4 LEF Paper
APO 39sec or less*1
tion Document size must be detected before the Start button is
pressed.
*1: "Time from Power on to Standby on UI" or "Time from Power on to print out one sheet" - "Time from IIT/DADF Status If the Platen is used, the document size is detected when the
Standby to print out one sheet" Platen Cover is closed.
When using the DADF, the document must already be loaded.
Tray Used Tray 1
Copy Side Settings 1->1 Sided Copy
Paper Quality Settings Plain
Quantity Settings 1 set
Reduce / Enlarge 100% (excluding the case of 100% Fine Adjustment)
Output Color Listed in Table 2
Output Tray Output Tray
Output Orientation Rear output (output orientation not specified)
State of Fusing Unit The Fusing Unit must be in the Ready state
State of 1st BTR 1stBTR is Contact for Color priority, 1stBTR is Retract for
Black&White priority (Default)
State of the LPH LPH must be in the Ready state
UI 4.3" WQVGA Color UI
Others Other application functions or optional functions must not be set.
Background Suppression OFF
ACC OFF Auto Color Correction

• 20 ppm model FCOT

Table 2
Color Setting

Document Set BW FC
No. Platen/DADF Output Tray Output Setting (PS:126mm/s) (PS:126mm/s)
1 Platen Output Tray Black (BW Mode) 8.6 sec or less 11.3 sec or less
2 Output Tray Color 10.3 sec or less 10.8 sec or less

Version 1.1 05/2014 6.1.11 Warm Up Time

6-13
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-14 6.1.13 Print Speed
Table 2 6.1.13 Print Speed
Color Setting Continuous speed (PPM) of the print engine is defined as follows:
Document Set BW FC
During output to the Main Body Output Tray, taking the time from when the tail edge of the 1st sheet is
No. Platen/DADF Output Tray Output Setting (PS:126mm/s) (PS:126mm/s)
output from the IOT exit area until the tail edge of the 11th sheet is output from the MC exit area to be t
3 DADF Output Tray Black (BW Mode) 10.0 sec or less 13.3 sec or less seconds, the no. of sheets that is printed in 1 minute is given as [(60/t)x10 for 1 Sided and (60/t)x20 for 2
4 Output Tray Color 11.8 sec or less 13.0 sec or less Sided].

Output settings can be selected from CopyDefault > Output Color. Color settings are set in Output of Consecutive printing speed shown in the table below. The numerical value for Duplex is IPM (Images Per
the UI panel. Minute).

Limitations
• This does not include the time for settings/cleaning/sagging/procon.

20 IOT (Main Body Feed Tray (Tray1)/Main Body Output Tray Paper)
Unit: 1 Sided: ppm, 2 Sided: ipm

Table 1
SS Direction SS SS Direction SS Direction
216.0mm or Direction216. 297.1- 364.1- SS Direction
lighter and 1-297.0mm 364.0mm and 432.0mm and 432.0mm or
FS direction and FS FS FS lighter and FS
257.1mm or direction257. direction257. direction257. direction257.0
higher (A4L/ 1 mm or 1 mm or 1mm or mm or lighter
Paper Type
8.5x11L) higher higher higher (A3S/ (B5S/L, A4S,
Settings Output
11x17S) B4S, 8.5x11S/
Color 13S/14S)

1 2 1 2 1 2 1 2 1 2
Sided Sided Sided Sided Sided Sided Sided Sided Sided Sided
Plain FC 20 17 12 11 12 10 12 8.5 12 8.5
*1Recycled
*1Pre-
Punched
PrePrinted BW 20 17 12 11 12 10 12 8.5 12 8.5
Colored
paper Letter-
head

* 1: Normally, no double-sided plain paper back, recycled paper back

20 IOT (STM feeding (Tray2)/Main Body Output Tray Paper) 20 IOT (MSI feeding/Main Body Output Tray Paper)
Unit: 1 Sided: ppm, 2 Sided: ipm Unit: 1 Sided: ppm, 2 Sided: ipm

Table 2 Table 3
SS Direction SS SS Direction SS Direction SS Direction SS SS Direction SS Direction
216.0mm or Direction216. 297.1- 364.1- SS Direction 216.0mm or Direction216. 297.1- 364.1- SS Direction
lighter and 1-297.0mm 364.0mm and 432.0mm and 432.0mm or lighter and 1-297.0mm 364.0mm and 432.0mm and 432.0mm or
FS direction and FS FS FS lighter and FS FS direction and FS FS FS lighter and FS
257.1mm or direction257. direction257. direction257. direction257.0 257.1mm or direction257. direction257. direction257. direction257.0
higher (A4L/ 1 mm or 1 mm or 1mm or mm or lighter higher (A4L/ 1 mm or 1 mm or 1mm or mm or lighter
Paper Type Paper Type
8.5x11L) higher higher higher (A3S/ (B5S/L, A4S, 8.5x11L) higher higher higher (A3S/ (B5S/L, A4S,
Settings Output Settings Output
11x17S) B4S, 8.5x11S/ 11x17S) B4S, 8.5x11S/
Color 13S/14S) Color 13S/14S)

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2
Sided Sided Sided Sided Sided Sided Sided Sided Sided Sided Sided Sided Sided Sided Sided Sided Sided Sided Sided Sided
Bond Paper FC 20 17 12 10.8 12 9.0 12 8.5 12 8.5 Bond Paper FC 20 17 12 10.6 12 9.8 12 8.7 12 8.7
*1 *1
Plain Plain
*1Recycled *1Recycled BW 20 17 12 10.6 12 9.8 12 8.7 12 8.7
*1Pre- BW 20 17 12 10.8 12 9.0 12 8.5 12 8.5 *1Pre-
Punched Punched
PrePrinted PrePrinted
Colored Colored
paper Letter- paper Letter-
head head
Heavy- FC 12.5 9.4 9.0 5.5 8.0 5.0 7.0 4.5 7.0 4.5 Heavy- FC 11 9.1 10.0 5.5 7.0 4.7 5.0 3.9 5.0 3.9
weight 1*1 BW 20 17 12 10.8 12 9.0 12 8.5 12 8.5 weight 1*1
HW Gloss HW Gloss
1*1 HW 1*1 HW BW 20 17 12 10.6 12 9.8 12 8.7 12 8.7
Labels 1*1 Labels 1*1
Special Special
Heavy- FC 12 - 9.0 - 8.0 - 7.0 - 7.0 - Heavy- FC 11 - 10.0 - 7.0 - 5.0 - 5.0 -
weight 2 BW 12 - 9.0 - 8.0 - 7.0 - 7.0 - weight 2
Heavy- Heavy- BW 11 - 10.0 - 7.0 - 5.0 - 5.0 -
weight Gloss weight Gloss
HW Labels 2 HW Labels 2
Envelope
*1: There are no double-sided High-Quality Paper back, Plain Paper back, Recycled Paper back, Heavy- Postcard
weight Paper back, Gloss 1 back and Label Paper
*1: There are no double-sided High-Quality Paper back, Plain Paper back, Recycled Paper back, Heavy-
weight Paper back, Gloss 1 back and Label Paper

Version 1.1 05/2014 6.1.13 Print Speed

6-15
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-16 6.1.14 Tray (Paper Feed)

6.1.14 Tray (Paper Feed) 6.1.14.4 Load while RUN

6.1.14.1 Paper Trays The function that enables loading of paper into a Tray that is not being used while printing is in progress
is available.
Paper Trays refer to all type of Trays that are pulled out towards the front.The MSI is installed on the left
side of the IOT by default. However, as the Lift Up is performed for each Tray, this Lift Up is performed by Exclusive Control.

6.1.14.2 Paper Tray Characteristics

Table 1
Supported
Supported Supported Paper Paper
Paper (Non-Standard Weight
IOT/TM TrayNO. (Standard Size) Size) (W x L) mm (gsm) Capacity Remarks
IOT Tray1 Min: B5 Non-Standard 60-90 250*1 Stack height: 27mm
Max: A3S, Sizes not supported
11X17S
MSI*4 Min: Postcard/ Min: 88.9 x 98.4*3 60-216 100*1 Stack height: 10mm
Envelope/A5SL Max: 297.0 x 431.8
Max: A3S,
11X17S
STM Tray2 Min: B5 Min: 139.7 x 182.0 60-256 560*1 Stack height: 54 mm
(Option) Max: Max: 297.0 x 431.8 500*2
A3S,11X17S

*1: B Zone/Fresh Paper, P Paper

*2: Standard IBG 80gsm

*3: Feeding of paper with length 98.4 - 134.9mm has limitations such as envelope skew and trailing edge
damage.

*4: No fixed auto-detect function

6.1.14.3 Remaining Paper Amount Detection

Table 2
Tray Detection & Notification
Tray1 0% and 100%, 2-step
MSI 0% "with paper", 2-step
Tray2 (STM optional) 5 levels - 0%, 25%, 50%, 75%, and 100%

• In the case of Tray2 (STM optional) with the lift-up mechanism, the power is turned OFF during lift-
up, if the power is turned ON again without removing the Tray, and the Tray is inserted again while
the Bottom Plate has not dropped, the remaining paper amount cannot be detected correctly.
6.1.15 Tray Size Factory Settings 6.1.16 Classifications and Functions
The Factory Default Size Settings are as follows: 6.1.16.1 Classifications and Functions
This section describes the relationship between paper type selection and paper feeding.
Table 1
Tray APO/GCO The Paper Type Settings for Trays can be set at the Key Operator Tools mode (KO) or Control Panel
(CO). The Tools allows you to change settings so that you can enter a paper type from the settings
IOT Main Unit Tray1 Not defined
screen that is displayed when a tray is installed (Default: Display OFF). The paper type for the MSI can
STM Tray2 Not defined be set using the Control Panel.

O: Possible, X: Not Possible

Table 1
Standard
Tray STM MSI Duplex
Driver Cont Paper IOT Paper Weight
Display Quality Quality (gsm) 60-90 60-256 60-216 60-169
(gsm) (gsm) (gsm) (gsm)
Plain Plain paper L Plain A 60~79 O O O O
(B/W)
Plain paper L Plain A O O O O
(Color)
Plain paper H Plain D 80~90 O O O O
(B/W)
Plain paper H Plain D O O O O
(Color)
Recycled Recycled (B/W) Plain C 60~89 O O O O
Recycled paper Plain C O O O O
(Color)
Bond High-quality Plain F 90~105 X O O O
paper (B/W)
High-quality Plain F X O O O
paper (Color)
Heavyweight Heavyweight L Heavyweight 106~169 X O O O
(B/W)
Heavyweight L X O O O
(Color)
Extra Heavy- Heavy Paper H Extra Heavy- 170-216 X O 256 O 216 X
weight (B/W) weight (MSI
Heavyweight H 170~256 X O 256 O 216 X
(Color) (STM)
Label Label L (B/W) Labels 106~169 X O O X
Label L (Color) Labels X O O X
Label H (B/W) HW Labels 170~256 X O O X
256 216
Label H (Color) HW Labels X O O X
256 216

Version 1.1 05/2014 6.1.15 Tray Size Factory Settings

6-17
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-18 6.1.16 Classifications and Functions
Table 1 Table 1
Standard Standard
Tray STM MSI Duplex Tray STM MSI Duplex
Driver Cont Paper IOT Paper Weight Driver Cont Paper IOT Paper Weight
Display Quality Quality (gsm) 60-90 60-256 60-216 60-169 Display Quality Quality (gsm) 60-90 60-256 60-216 60-169
(gsm) (gsm) (gsm) (gsm) (gsm) (gsm) (gsm) (gsm)
Envelope Envelope Envelope - X X O X Heavy- Heavyweight L Heavy- 106~169 X O O -
Postcard Postcard Postcard - X X O X weight back(B/W) weight 1
Reload (Side2)
Gloss Gloss L (B/W) Gloss 106~169 X O O O
Heavyweight L Heavy- X O O -
Gloss L (Color) Gloss X O O O
back (Color) weight 1
Heavy- Gloss M (B/W) Heavy- 170~256 X O O X
(Side2)
weight Gloss weight Gloss 256 216
Extra Heavy- Heavyweight H Heavy- 170-216 X O 256 O 216 -
Gloss M (Color) Heavy- X O O X weight back (B/W) weight 2 (MSI)
weight Gloss 256 216
Reload (Side2) 170~256
Pre-Punched Plain L Plain A 60~79 O O O O (STM)
Heavyweight H Heavy- X O 256 O 216 -
Plain H Plain D 80~89 O O O O back (Color) weight 2
Preprinted Plain L Plain A 60~79 O O O O (Side2)
Plain H Plain D 80~89 O O O O Gloss Gloss back L Gloss 1 106~169 X O O -
Colored Plain L Plain A 60~79 O O O O Reload (B/W) (Side2)
paper Plain H Plain D 80~89 O O O O Gloss L back Gloss 1 X O O -
Letterhead Plain L Plain A 60~79 O O O O (Color) (Side2)

Plain H Plain D 80~89 O O O O Heavy- Gloss M back Gloss 2 170~256 X O 256 O 216 -
weight Gloss (B/W) (Side2)
Plain Reload Plain Paper L Plain paper 60~79 O O O -
Reload Gloss M back Gloss 2 X O 256 O 216 -
back (B/W) A (Side2)
(Color) (Side2)
Plain Paper L Plain paper O O O -
Postcard Postcard back Postcard - X X O -
back (Color) A (Side2)
back side (Side2)
Plain Paper H Plain paper 80~90 O O O -
Back (B/W) D (Side2)
Plain paper H Plain paper O O O -
back (Color) D (Side2)
Recycled Recycled paper Plain paper 60~89 O O O -
paper back back (B/W) C (Side2)
side Recycled paper Plain paper O O O -
back (Color) C (Side2)
High-quality High-quality Plain paper 90~105 X O O -
paper back paper back (B/ F (Side2)
side W)
High quality Plain paper X O O -
paper back F (Side2)
(Color)
6.1.17 Auto 2 Sided Printing 6.1.18 Output Function
The paper sizes and weights that can be used for 2 sided print are as follows. 6.1.18.1 Center Tray
Supported Size: All paper sizes handled by the machine
1. Paper Size
• Main scanning direction: 128.0mm - 297.0mm Capacity: The average values of the no. of sheets that can be accommodated are as follows (using fresh
• Sub-scanning direction: 139.7mm - 431.8mm paper).

Table 1
2. Paper Weight
• 60 gsm~110gsm Configuration Output Tray Paper Type Output Capacity
None Output Tray body P Paper - A4 LEF 250 sheets
P Paper - A3 SEF 200 sheets

• The above is Simplex print

• The ability to accommodate A4 SEF and Letter SEF is not defined.
• Full Stack detection: None
• Finishing Capability
– Can easily sort without folding or messing up the order
– Paper with width of 177 mm or smaller may have problems with folding and collating.
• Output orientation: Face down

6.1.18.2 OCT
OCT (Offset Catch Tray) output function not available.

6.1.18.3 Side Tray

Side Tray output function not available.

Version 1.1 05/2014 6.1.17 Auto 2 Sided Printing

6-19
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-20 6.1.19 Resolution/Gradation

6.1.19 Resolution/Gradation 6.1.20 Image Loss

6.1.19.1 IOT Unit Each paper size has the following image loss.
• Resolution
• Lead Edge: 5.5mm or lighter
Fast Scan: 1200 dots/25.4mm (by the ESS), Slow Scan: 2400 dots/25.4mm
• Side Edge: 5.5mm or lighter
• Tail edge: 5.5mm or less
• Gradation
256-Gradation

6.1.19.2 Copy Quality/Resolution

• Data resolution: Processing resolution for IPS output

Table 1
Document Type ALL
Black (BW Data Resolution (dpi) 600x600
Mode) Depth 1bit
Gradation 256
Color Data Resolution (dpi) 600x600
Depth 1bit
Gradation 256

• Output Resolution: IOT resolution to print

Table 2
Document Type ALL
Black (BW Output Resolution (dpi) 1200x2400dpi
Mode) Depth 1bit
Gradation 256
Process Speed 126mm/s
Image Enhancement No features
Color Output Resolution (dpi) 1200x2400dpi 1bit
Depth
Gradation 256
Process Speed 126mm/s
Image Enhancement No features
 6.1.21 Print Area 6.1.21.2 Maximum Printable Area
6.1.21.1 Paper Sizes that Can be Transported The printable area defines the area where the image can be printed. The maximum printable area of the
Main Unit is as follows.
The minimum and maximum paper sizes that can be transported in the Main Unit are as follows:
• Maximum printable area during Print Job: Width: 291.0mm, Length: 425.8mm
• Minimum transportable paper size: Width 88.9mm x Length 98.4mm
• Maximum printable area during Copy Job: Width: 291.0mm, Length: 425.8mm
• Maximum transportable paper size: Width 297.0mm x Length 432.0mm *1
(Platen and DADF both)

*1: When non-standard envelope size is printed on or copied on, the operation by the user is to be "Set- 6.1.21.3 Guaranteed Print Area
ting, on which flap portion is not included in size in paper feed direction". The area where the image quality is guaranteed is referred to as Print Guaranteed Area. The Print Guar-
anteed Area of the Main Unit is as follows.
• When the printer detects that an envelope is carried in, control with the size of the paper feed direc-
tion set in the UI with 60mm added as the flap portion. • Maximum guaranteed printing area during Print Job: Width: 289.0mm, Length: 423.4mm
• If the paper feed direction size set in the UI added with 60mm is greater than the maximum paper • Maximum guaranteed printing area during Copy Job: Width: 289.0mm, Length: 423.4mm
feed direction size (432mm), do not scale it to fit into the maximum paper feed direction size
(Platen and DADF both)
(432mm).
However, this print area is fully applied only when the Print Job and Copy Job uses paper with size A3
• If the paper feed direction size set in the UI added with 60mm is greater than the maximum paper
SEF in width or 11x17" SEF in length.
feed direction size (432mm), it operates at the same productivity as the maximum paper feed direc-
tion size (432mm).
6.1.22 Alignment Specification

Table 1
SYSTEM Spec *1 (Platen) IOT (non-consolidated) (Reference)
Item IIT (non-consolidated) DADF (non-consolidated)
Tray MSI *2 SYSTEM Spec (DADF) Tray MSI*2
Lead Registration +/-2.1mm +/-2.7mm +/-2.6mm +/-1.9mm +/-2.6mm +/-0.7mm +/-1.5mm
+/-2.5mm - +/-2.9mm +/-2.3mm - - +/-1.5mm
Side Registration +/-2.2mm +/-3.1mm +/-2.9mm +/-2.0mm +/-3.0mm +/-0.75mm +/-1.5mm
+/-2.6mm - +/-3.2mm +/-2.4mm - - +/-1.5mm
Lead Skew (200 mm) +/-1.7mm +/-2.2mm +/-2.3mm +/-1.5mm +/-2.0mm +/-0.8mm +/-1.0mm
+/-2.2mm - +/-2.7mm +/-2.0mm - - +/-1.0mm
Side Skew (400 mm) +/-3.3mm +/-4.2mm +/-4.6mm +/-3.0mm +/-4.0mm +/-1.2mm +/-2.2mm
+/-4.2mm - +/-5.4mm +/-4.0mm - - +/-2.0mm
Horizontal Reduce/Enlarge Precision (All area) (280 mm) +/-0.7% - +/-1.2% +/-0.6% - +/-0.31% +/-0.5%
Applicable for 100% +/-0.7% - +/-1.2% +/-0.6% - - +/-0.5%
Horizontal Reduce/Enlarge Precision (All area) (280 mm) +/-1.4% - +/-2.4% - - - -
Applicable for 25 to 200% +/-1.4% - +/-2.4% - - - -
Horizontal Reduce/Enlarge Precision (All area) (280 mm) +/-2.8% - +/-4.8% - - - -
Applicable for 201 to 400% +/-2.8% - +/-4.8% - - - -
Vertical Magnification Ratio Precision (All area) (400 mm) +/-0.7% - +/-1.2% +/-0.6% - +/-0.31% +/-0.5%
Applicable for 100% +/-0.7% +/-1.2% +/-0.6% - +/-0.5%
Vertical Magnification Ratio Precision (All area) (400 mm) +/-1.4% - +/-2.4% - - - -
Applicable for 25 to 200% +/-1.4% - +/-2.4% - - - -
Vertical Magnification Ratio Precision (All area) (400 mm) +/-2.8% - +/-4.8% - - - -
Applicable for 201 to 400% +/-2.8% - +/-4.8% - - - -

Version 1.1 05/2014 6.1.21 Print Area

6-21
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-22 6.1.22 Alignment Specification
Table 1
SYSTEM Spec *1 (Platen) IOT (non-consolidated) (Reference)
Item IIT (non-consolidated) DADF (non-consolidated)
Tray MSI *2 SYSTEM Spec (DADF) Tray MSI*2
Perpendicularity (400 mm) +/-2.5mm - +/-3.4mm +/-2.1mm - +/-1.7mm +/-2.2mm
+/-2.8mm +/-4.0mm Adjusted +/-1.7mm*3 +/-2.0mm
+/-2.5mm
Adjusted +/-2.1mm*3
Linearity (vertical) (400 mm span) 1.6mm - 2.0mm 0.8mm - 0.8mm 0.5mm
1.6mm 2.0mm 0.8mm - - 0.5mm
Linearity (horizontal) (280 mm span) 1.2mm - 1.4mm 0.8mm - - -
1.2mm 1.4mm 0.8mm
Linearity (diagonal) (280 mm span) 1.2mm - 1.4mm 0.8mm - - -
1.2mm 1.4mm 0.8mm
Trapezoid Correction (400 mm) +/-2.2mm - +/-3.0mm +/-2.0mm - +/-0.7mm +/-1.8mm (400mm)
+/-2.2mm +/-3.0mm +/-2.0mm +/-1.5mm (280mm)

*1: The center of the document must be set correctly at the center of the scan. How to Measure

*2: Specified in the state where the Side Guide is set correctly. Table 2
Measurement Item How to Measure
*3: This specification should be applied on the assumption that it is adjustable by the operation on UI
after set up. Lead Regi [mm] (P1 to P2) - Reference value *1
Side Regi [mm] (P7 to P8) - Reference value *1
• DC Test Pattern (FX STP3600) (Figure 1) Lead Skew (200 mm) [mm] (P5~P6) - (P3~P4)
Side Skew (400 mm) [mm] (P9~P10) - (P11~P12)
Horizontal R/E Precision (All area) [%] [(P8~P13) - 280]/280x100
Vertical R/E Precision (All area) [%] [(P2~P14) - 400]/400x100
Perpendicularity [mm] The shift between P14 and the perpendicular line that extends
from the intersection of the straight line connecting P4 and P6
and the line A.
Linearity (Vertical) (400 mm) [mm] The maximum shift between the intersections of the vertical line
B with the various horizontal lines and the straight line connect-
ing P10 and P12.
Linearity (Horizontal) (280 mm) [mm] The maximum shift between the intersections of the horizontal
line C with the various vertical lines and the straight line con-
necting P10 and P15.
Linearity (Diagonal) (280 mm) [mm] The maximum shift between the intersections of the diagonal
line D with the various lines and the straight line connecting P17
and P13, or the maximum shift of the intersections of the diago-
nal line E with the various lines and the straight line connecting
Figure 1 j0ch61015 P8 and P18, whichever is larger.
Parallelism [mm] (P10~P12) - (P15~P16)

*1: For the reference value in the table, measure the length of the corresponding position on the FX
STP3600.
6.1.23 I/F specification 6.1.24 Print Feature
6.1.23.1 I/F Layout Sketch
Table 1
Item Contents
Type Built-in Type
Continuous Print Speed*1 Conforms with the Basic Feature/Copy Feature
Resolution*1 Output Resolution: 1200 x 2400dpi
Data Processing Resolution: 600 x 600dpi
Page-Description Language Standard: PCL6/5e, HBPL
Options: None
Supported Protocols TCP/IP (lpd, IPP/IPPS, Port9100, SMB,WSD)
Ethernet (Standard)
Supported OS*2 Windows XP (32bit), Windows Server 2003 (32bit), Windows Vista
(32bit), Windows Server 2008 (32bit), Windows 7 (32bit), Windows
8 (32bit), Windows 8.1 (32bit), Windows XP Professional (64bit),
Windows Server 2003 (64bit), Windows Vista (64bit), Windows
Server 2008 (64bit), Windows 7 (64bit), Windows 8 (64bit), Win-
dows Server 2008 R2 (64bit), Windows Server 2012 (64bit), Win-
Figure 1 j0bs60008 dows 8.1 (64bit), Windows Server 2012 R2 (64bit),
Mac OS X 10.5/10.6/10.7/10.8/10.9
6.1.23.2 I/F Overview Built-in Fonts Standard: PCL6/5: 81 European fonts, 36 Symbol set
Options: None
The overview of the supported I/F is as follows.
Interface Standard: Ethernet 100BASE-TX/10BASE-T, USB 2.0
Table 1
I/F Protocol *1: The speed may also drop due to Image Quality adjustment. The print speed may also drop depending
on the document.
Ethernet100Base-TX/10Base-T TCP/IP, : lpd, IPP, Port9100, WSDPrint, etc.
USB2.0 Device *2: The latest supported OS information can be found at our web site.

Version 1.1 05/2014 6.1.23 I/F specification

6-23
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-24 6.1.25 Scan Feature Specifications

6.1.25 Scan Feature Specifications 6.1.26 Fax functions

6.1.26.1 Fax functions
Table 1
Item Contents Table 1
Type Color Scanner Item Contents
Scan Size Conforms with the Basic Feature/Copy Feature Sent document size Maximum: A3,11 x 17”
Scan Resolution Monochrome: 600x600dpi, 400x400dpi, 300x300dpi, Record paper size Maximum: A3,11 x 17”, Minimum: A5
200x200dpi, 150x150dpiColor: 400x400dpi, 300x300dpi, Electrical transmission time 2 to 3 seconds*1
200x200dpi, 150x150dpi
Communication Mode G3 (ITU-T)
Scan Gradation 10bit input and 8bit output for each color of RGB
Scan line density Standard: 8x3.85 lines/mm, 200x100dpi
Document Scan Speed*1 Monochrome: 24 sheets/min
High Quality: 8x7.7 lines/mm, 200x100dpi
[Standard document (A4 Landscape), 200dpi]
Superfine (400dpi): 16x15.4 lines/mm, 400x100dpi
Color: 19 sheets/min
[Standard document (A4 Landscape), 200dpi,] Encoding Method MH, MR, MMR, JBIG
Interface Ethernet 100BASE-TX/10BASE-T,USB2.0 Communication speed G3: 33.6 / 31.2 / 28.8 / 26.4 / 24.0 / 21.6 / 19.2 / 16.8 / 14.4 /
12.0 / 9.6 / 7.2 / 4.8 / 2.4kbps
Scan to PC Supported Protocols: TCP/IP (SMB, FTP,WSD)
Applicable line Subscribed telephone line, PBX, FAX communication network
Supported OS*2:
(PSTN), Maximum 1 port
Windows XP (32bit), Windows Server 2003 (32bit), Windows
Vista (32bit), Windows Server 2008 (32bit), Windows 7 (32bit),
Windows 8 (32bit), Windows 8.1 (32bit), Windows XP Profes- *1: When sending A4 type 700 letter document in standard image quality (8x3.85lines/mm), high speed
sional (64bit), Windows Server 2003 (64bit), Windows Vista mode (28.8kbps or more: JBIG). This is the electrical transmission time for image information only and
(64bit), Windows Server 2008 (64bit), Windows 7 (64bit), Win- does not include the control time of communication. The actual communication time may vary depending
dows 8 (64bit), Windows Server 2008 R2 (64bit), Windows on the content of the document, the device of the opposite party and the status of the line.
Server 2012 (64bit), Windows 8.1 (64bit), Windows Server
2012 R2 (64bit), Mac OS X 10.5/10.6/10.7/10.8/10.9 6.1.26.2 Direct Fax function
Output Format:
Monochrome binary: PDF/TIFF/DocuWorks documents Gray- Table 2
scale / Color: PDF/JPEG/TIFF/DocuWorks documents
Item Contents
Scan to E-mail Supported Protocols: TCP/IP (SMTP )
Output Format: Sent document size A3, B4, A4
Monochrome binary: PDF/TIFF/DocuWorks documents Scan line density According to the Fax Function
Grayscale / Color: PDF/JPEG/TIFF/DocuWorks documents Communication speed According to the Fax Function
Applicable line According to the Fax Function
*1: The Read Only speed varies depending on the document. Supported OS*1 Windows XP (32bit), Windows Server 2003 (32bit), Windows
Vista (32bit), Windows Server 2008 (32bit), Windows 7 (32bit),
*2: Please refer to the Fuji Xerox web site for the latest supported operating systems. Windows 8 (32bit), Windows 8.1 (32bit), Windows XP Profes-
sional (64bit), Windows Server 2003 (64bit), Windows Vista
(64bit), Windows Server 2008 (64bit), Windows 7 (64bit), Win-
dows 8 (64bit), Windows Server 2008 R2 (64bit), Windows
Server 2012 (64bit), Windows 8.1 (64bit), Windows Server
2012 R2 (64bit)
Mac OS X 10.5/10.6/10.7/10.8/10.9

*1: Please refer to the Fuji Xerox web site for the latest supported operating systems.
6.1.27 Document Feeder (DADF) 6.1.28 Duplex Kit
Table 1 Table 1
Item Contents Item Contents
Type of Document Feeder Duplex Auto Document Feeder Paper Size Conforms with the Basic Feature/Copy Feature
Originals Size/Type Max: A3, 11x17" Paper Weight 60 to 169gsm
Min: A5
38-128 gsm (double-sided: 50~128gsm)
Document capacity *1 110 sheets
Document replacement speed Monochrome: 20 sheets/min
(A4 LEF 1 Sided Copy) Color: 18 sheets/min
Size/Weight W540 x D492 x H119 mm (Includes Document Set Tray pro-
truding part)
6.5kg

*1: When using 80gsm Paper.

Version 1.1 05/2014 6.1.27 Document Feeder (DADF)

6-25
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-26 6.1.29 One Tray Module (Optional)

6.1.29 One Tray Module (Optional) 6.1.30 Billing Counter

6.1.30.1 Billing Counter
Table 1
1. Type of Billing Counter
Item Contents
• There are 13 Billing Counters.
Paper Size Conforms with the Basic Feature/Copy Feature Billing Counter prepared specifically as Table 1.
Paper Weight 60 to 256gsm O: Implement Billing Counter
Paper Tray Capacity*1 500 sheets x 1 tray X: Do not implement Billing Counter
Dimensions/ Weight W 541 x D 586 x H 113 mm, 11 kg
Table 1
*1: When using 80gsm Paper. Destination

Counter Type APO/GCO

Full Color Print O
Full Color Copy O
Full Color FAX (APO/GCO) X
Color1 Print O
Color2 Print O
B&W Print O
B&W Copy O
B&W FAX O
Large Size Color O
Large Size B&W X
Modal Color X
Modal B&W X

2. Form of Billing Counter

• Two billing counter sets prescribed in the type of billing counter must be installed including the
back up. These billing counters are equipped on the following PWBA.

Table 2
Operation when the upper
limit is reached
Stored in Counter upper limit
*2 Fail Occurs
ESS PWB1*1 1,000,000 117-347
ESS PWB2*1 1,000,000 117-347

*1: Controller NVMs are stored in each of the two EEPROM which are physically separated.
*2: Continuous counting up is not performed. When the upper limit is reached, a system failure
occurs.

3. Billing meter
(1) Display of billing meter
• Displays the electronic Billing count value.
 • The default value for system data Billing Meter Type is Billing1.

Table 3
Color B&W Large
Billing Meter Size
Type Print Copy FAX Print Copy FAX Color
Billing1 Meter1 Meter2 Meter3
Meter4
Billing2 Meter2 Meter1 Meter3
Meter4
Billing3 Meter1 Meter2 Meter3
Meter4
Billing4 Meter1 Meter2 Meter3
Meter4
Billing5 Meter1 Meter2 Meter3
Meter4

(2) Billing Meter Notification

• Provides a notification by SNMP protocol only function.
• SNMP protocol allows the following information to be retrieved.
• Color Impressions (1.3.6.1.4.1.253.8.53.13.2.1.6.1.20.33): The total counter value related
to "Color" of the billing counter mentioned above
• Black Impressions (1.3.6.1.4.1.253.8.53.13.2.1.6.1.20.34): The total counter value related
to "B&W" of the billing counter mentioned above

Version 1.1 05/2014 6.1.30 Billing Counter

6-27
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-28 6.1.30 Billing Counter
6.2.1 Tools and Service Consumables 6.2.2 Consumables
6.2.1.1 Tools
Table 1
The following tools can be stored in the CE Basic Tool Set as standard.
CRU/
Table 1 Consumables Product Code ERU Life End

No. TOOL No. TOOL NAME GCO TonerCartridge (K) T&M: CRU 9KPV
CT202242
1 499T 00247 Test Pattern (Mono A3X1)
TonerCartridge (Y) T&M: CRU 3 KPV
2 499T 00283 Test Pattern (A3) for DADF Adjustment
CT202245
3 499T 00301 Screw Driver (-) 3X50
TonerCartridge T&M: CRU 3KPV
4 499T 00353 Stubby Driver (M) CT202244
5 499T 00355 Screw Driver (+) 100mm TonerCartridge (C) T&M: CRU 3KPV
6 499T 01423 Box Driver with Magnet (5.5mm) CT202243
7 499T 01901 Side Cutting Nipper APO (Except TonerCartridge (K) T&M: CRU 9KPV
8 499T 02005 Round Nose Plier-Safety GCO) CT202246
9 499T 02327 Digital Multi-Meter Set TonerCartridge (Y) T&M: CRU 3KPV
10 499T 02601 Silver Scale 150mm CT202249

11 499T 08104 Flash Light (U-3) TonerCartridge T&M: CRU 3KPV

(M) CT202248
12 499T 08902 Brush
TonerCartridge (C) T&M CRU 3KPV
13 499T 09588 Needle Adapter
:CT202247
14 499T 07776 USB CABLE For PSW
APO/GCO- TonerCartridge (K) FSMA: CRU 9KPV
15 499T 00276 Color Test Pattern Common CT202238
TonerCartridge (Y) FSMA: CRU 3KPV
6.2.1.2 Service Consumables CT202241
There are no Service Consumables unique to this model. TonerCartridge FSMA: CRU 3KPV
(M) CT202240
Whenever special consumables for the machine are required, it will be notified in a separate technical TonerCartridge (C) FSMA CRU 3KPV
information. :CT202239
TonerCartridge (K) Conver- CRU 9KPV
sion:CT20223
7*1
TonerCartridge (K) Initial for: CRU 4KPV
APO/GCO- Without prod-
Common uct code
TonerCartridge (Y) Initial for: CRU 2.5KPV
Without prod-
uct code
TonerCartridge Initial for: CRU 2.5KPV
(M) Without prod-
uct code
TonerCartridge (C) Initial for: CRU 2.5KPV
Without prod-
uct code

Version 1.1 05/2014 6.2.1 Tools and Service Consumables

6-29
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-30 6.2.2 Consumables
Table 1
CRU/
Consumables Product Code ERU Life End
APO/GCO- Toner collection- CWAA0869 CRU 15KPV
Common Bottle *2
DrumCartridge CT351053 ERU*3 BW 89.6KPV equivalent (700K Cycle)
FC 68.2KPV equivalent (700K Cycle)

*1: Switched to FSMA from T&M.

*2: User carries out print head cleaning when replacing the toner collection bottle.

*3: Configuration similar to CRU (The worker basically is an engineer but can request work to the user.
Drivers available. Instructions included).
6.3.3 NVM DADF
Table 1 NVM DADF
Setting Default
Chain-Link NVM Name Range Value step Description
711-001 DADF Lead Reg. Adjustment (Side 1) (220.0 mm/s) 105-135 120 0.1 mm 1) Default Value: 0 mm
(When 711-140 value is Default and 711-001 value is 120)
2) Adjustment Range (when 711-140 value is Default)
: +1.5 mm (105 pulse) / -1.5 mm (135 pulse)
3) Adjustment Range (when 711-140 value is 80 to 230)
: +5.5 mm (80 pulse) / -12.5 mm (230 pulse)
711-002 DADF Lead Reg. Adjustment (Side 1) (165.0 mm/s) 105-135 120 0.1 mm 1) Default Value: 0 mm
(When 711-140 value is Default and 711-002 value is 120)
2) Adjustment Range (when 711-140 value is Default)
: +1.5 mm (105 pulse) / -1.5 mm (135 pulse)
3) Adjustment Range (when 711-140 value is 80 to 230)
: +5.5 mm (80 pulse) / -12.5 mm (230 pulse)
711-003 DADF Lead Reg. Adjustment (Side 1) (110.0 mm/s) 105-135 120 0.1 mm 1) Default Value: 0 mm
(When 711-140 value is Default and 711-003 value is 120)
2) Adjustment Range (when 711-140 value is Default)
: +1.5 mm (105 pulse) / -1.5 mm (135 pulse)
3) Adjustment Range (when 711-140 value is 80 to 230)
: +5.5 mm (80 pulse) / -12.5 mm (230 pulse)
711-004 DADF Lead Reg. Adjustment (Side 1) (82.5 mm/s) 105-135 120 0.1 mm 1) Default Value: 0 mm
(When 711-140 value is Default and 711-004 value is 120)
2) Adjustment Range (when 711-140 value is Default)
: +1.5 mm (105 pulse) / -1.5 mm (135 pulse)
3) Adjustment Range (when 711-140 value is 80 to 230)
: +5.5 mm (80 pulse) / -12.5 mm (230 pulse)
711-021 DADF Lead Reg. Adjustment (Side 2) (220.0 mm/s) 105-135 120 0.1 mm 1) Default Value: 0 mm
(When 711-141 value is Default and 711-021 value is 120)
2) Adjustment Range (when 711-141 value is Default)
: +1.5 mm (105 pulse) / -1.5 mm (135 pulse)
3) Adjustment Range (when 711-141 value is 80 to 230)
: +5.5 mm (80 pulse) / -12.5 mm (230 pulse)
711-022 DADF Lead Reg. Adjustment (Side 2) (165.0 mm/s) 105-135 120 0.1 mm 1) Default Value: 0 mm
(When 711-141 value is Default and 711-022 value is 120)
2) Adjustment Range (when 711-141 value is Default)
: +1.5 mm (105 pulse) / -1.5 mm (135 pulse)
3) Adjustment Range (when 711-141 value is 80 to 230)
: +5.5 mm (80 pulse) / -12.5 mm (230 pulse)
711-023 DADF Lead Reg. Adjustment (Side 2) (110.0 mm/s) 105-135 120 0.1 mm 1) Default Value: 0 mm
(When 711-141 value is Default and 711-023 value is 120)
2) Adjustment Range (when 711-141 value is Default)
: +1.5 mm (105 pulse) / -1.5 mm (135 pulse)
3) Adjustment Range (when 711-141 value is 80 to 230)
: +5.5 mm (80 pulse) / -12.5 mm (230 pulse)

Version 1.1 05/2014 6.3.3 NVM DADF

6-31
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-32 6.3.3 NVM DADF
Table 1 NVM DADF
Setting Default
Chain-Link NVM Name Range Value step Description
711-024 DADF Lead Reg. Adjustment (Side 2) (82.5 mm/s) 105-135 120 0.1 mm 1) Default Value: 0 mm
(When 711-141 value is Default and 711-024 value is 120)
2) Adjustment Range (when 711-141 value is Default)
: +1.5 mm (105 pulse) / -1.5 mm (135 pulse)
3) Adjustment Range (when 711-141 value is 80 to 230)
: +5.5 mm (80 pulse) / -12.5 mm (230 pulse)
711-041 DADF Tail Edge Adjustment (Side 1) (220.0 mm/s) 0-255 151 0.0718 mm Default Value: 0 mm (151 pulse), +10.8 mm (-151 pulse) / -7.5 mm (+104 pulse)
Tail Edge adjustment = Lead Regi adjustment value + Tail Edge fine adjustment value
711-042 DADF Tail Edge Adjustment (Side 1) (165.0 mm/s) 0-255 151 0.0718 mm Default Value: 0 mm (151 pulse), +10.8 mm (-151 pulse) / -7.5 mm (+104 pulse)
Tail Edge adjustment = Lead Regi adjustment value + Tail Edge fine adjustment value
711-043 DADF Tail Edge Adjustment (Side 1) (110.0 mm/s) 0-255 151 0.0718 mm Default Value: 0 mm (151 pulse), +10.8 mm (-151 pulse) / -7.5 mm (+104 pulse)
Tail Edge adjustment = Lead Regi adjustment value + Tail Edge fine adjustment value
711-044 DADF Tail Edge Adjustment (Side 1) (82.5 mm/s) 0-255 151 0.0718 mm Default Value: 0 mm (151 pulse), +10.8 mm (-151 pulse) / -7.5 mm (+104 pulse)
Tail Edge adjustment = Lead Regi adjustment value + Tail Edge fine adjustment value
711-061 DADF Tail Edge Adjustment (Side 2) (220.0 mm/s) 0-255 151 0.0718 mm Default Value: 0 mm (151 pulse), +10.8 mm (-151 pulse) / -7.5 mm (+104 pulse)
Tail Edge adjustment = Lead Regi adjustment value + Tail Edge fine adjustment value
711-062 DADF Tail Edge Adjustment (Side 2) (165.0 mm/s) 0-255 151 0.0718 mm Default Value: 0 mm (151 pulse), +10.8 mm (-151 pulse) / -7.5 mm (+104 pulse)
Tail Edge adjustment = Lead Regi adjustment value + Tail Edge fine adjustment value
711-063 DADF Tail Edge Adjustment (Side 2) (110.0 mm/s) 0-255 151 0.0718 mm Default Value: 0 mm (151 pulse), +10.8 mm (-151 pulse) / -7.5 mm (+104 pulse)
Tail Edge adjustment = Lead Regi adjustment value + Tail Edge fine adjustment value
711-064 DADF Tail Edge Adjustment (Side 2) (82.5 mm/s) 0-255 151 0.0718 mm Default Value: 0 mm (151 pulse), +10.8 mm (-151 pulse) / -7.5 mm (+104 pulse)
Tail Edge adjustment = Lead Regi adjustment value + Tail Edge fine adjustment value
711-081 Vertical Reduce/Enlarge Fine Adjustment 1 0-40 20 0.001 Default Value: 0% (20), +/-2% (+/-20), 0.1% increments
(High: TBD, Mid: 220.0 mm/s, Low: TBD) Adjusts only the Top Speed for Feed Motor.
711-082 Vertical Reduce/Enlarge Fine Adjustment 2 0-40 20 0.001 Default Value: 0% (20), +/-2% (+/-20), 0.1% increments
(High: TBD, Mid: 165.0 mm/s, Low: TBD) Adjusts only the Top Speed for Feed Motor.
711-083 Vertical Reduce/Enlarge Fine Adjustment 3 0-40 20 0.001 Default Value: 0% (20), +/-2% (+/-20), 0.1% increments
(High: TBD, Mid: 110.0 mm/s, Low: TBD) Adjusts only the Top Speed for Feed Motor.
711-084 Vertical Reduce/Enlarge Fine Adjustment 4 0-40 20 0.001 Default Value: 0% (20), +/-2% (+/-20), 0.1% increments
(High: TBD, Mid: 82.5 mm/s, Low: TBD) Adjusts only the Top Speed for Feed Motor.
711-140 DADF Lead Regi Offset NVM (Side 1) 80-230 120 0.1 mm Default Value: 0 mm (120 pulse), +4.0 mm (80 pulse) / -11.0 mm (230 pulse)
711-141 DADF Lead Regi Offset NVM (Side 2) 80-230 120 0.1 mm Default Value: 0 mm (120 pulse), +4.0 mm (80 pulse) / -11.0 mm (230 pulse)
711-142 DADF Tail Edge Replace All NVM (Side 1) 0-255 151 0.0718 mm Default Value: 0 mm (151 pulse), +10.8 mm (-151 pulse) / -7.5 mm (+104 pulse)
(x2 for Soft) Rewrites all data of 711-041 to 711-044 with the specified data.
711-143 DADF Tail Edge Replace All NVM (Side 2) 0-255 151 0.0718 mm Default Value: 0 mm (151 pulse), +10.8 mm (-151 pulse) / -7.5 mm (+104 pulse)
(x2 for Soft) Rewrites all data of 711-061 to 711-064 with the specified data.
711-144 Vertical Ratio Fine Adjustment - Replace All 0-40 20 0.001 Default Value: 0% (20), +/-2% (+/-20), 0.1% increments
Adjusts only the Top Speed for Feed Motor.
Rewrites all data of 711-081 to 711-084 with the specified data.
711-150 Loop Amount Adjustment (Side 1) (x1 Pulse) 0-9 6 40 Pulse Feed Roll Step: 0.026112
NVM 1Count: 0.026112 * 40 = 1.044 mm
711-151 Loop Amount Adjustment (Side 2) (x6 Pulse) 0-14 5 30 Pulse Exit Roll Step: 0.035904
NVM 1Count: 0.035904 * 30 = 1.077 mm
 Table 1 NVM DADF
Setting Default
Chain-Link NVM Name Range Value step Description
711-155 Feed Gear Initialize Operation 0-1 0 - 0: Do not perform initialize operation
1: Perform initialize operation
711-158 Stop Position Adjustment During Invert (T27) 0-40 20 0.2 mm Sets the adjustment time so that the distance (step distance) is the same for every speed.
Adjustment Value (ms) = (NVM Input Value - NVM Default Value) / Transport Speed x 1000 x 0.2
(mm step).
711-159 TA Clutch OFF Timing (T21) 0-20 0 0.2 mm Sets the adjustment time so that the distance (step distance) is the same for every speed.
Adjustment Value (ms) = (NVM Input Value - NVM Default Value) / Transport Speed x 1000 x 0.2
(mm step).
711-160 Feed Clutch OFF Timing 0-40 20 0.2 mm Sets the adjustment time so that the distance (step distance) is the same for every speed.
(Side 1 Loop Unravel Timing) (T20) Adjustment Value (ms) = (NVM Input Value - NVM Default Value) / Transport Speed x 1000 x 0.2
(mm step).
711-161 Solenoid ON Timing 0-40 20 0.2 mm Sets the adjustment time so that the distance (step distance) is the same for every speed.
(Side 2 Loop Unravel Timing) (T22) Adjustment Value (ms) = (NVM Input Value - NVM Default Value) / Transport Speed x 1000 x 0.2
(mm step).
711-164 Document Slow Scan Size Correction Value 0-100 50 0.1 mm Correction value for [Size Detection Auto-Correction Function]
Document Size Correction Value: +/-5 mm
711-174 Nudger Lift Up Adjustment (High) (T26 ms) 0-40 20 4ms Default value: 0 ms +/-80 ms, 4 ms increments
711-175 Nudger Lift Up Adjustment (Middle) (T26 ms) 0-40 20 4ms Default value: 0 ms +/-80 ms, 4 ms increments
711-176 Nudger Lift Up Adjustment (Low) (T26 ms) 0-40 20 4ms Default value: 0 ms +/-80 ms, 4 ms increments
711-187 Letter Mode Setting 0-15 0 - Operation setting for letter documents
711-188 Prohibited Combination Jam Detection Settings (No 0-1 1 - When in No Mixed Mode:
Mixed Mode) 0: Do not detect Jams due to prohibited combinations
1: Detect Jams due to prohibited combinations
711-190 Too Long Jam Settings Switch 0-165 40 15 mm Default value: 1275 mm (40), -600 mm/+1875 mm, 15 mm increments
711-191 Too Short Jam Detection Settings 0-1 1 - 0: Do not detect Jams
1: Detect Jams
711-198 DADF OPEN SENSOR Availability 0-1 0 There is a DADF OPEN SENSOR at the DADF: 0 (DC S2010/S1810)
There is no DADF OPEN SENSOR at the DADF: 1
711-199 Drive Type 0-3 1 - 0: High, 1: Middle, 2: Low, 3: Dummy
711-202 Speed Up Start Position Adjustment During Duplex 0-40 20 0.2 mm Sets the adjustment time so that the distance (step distance) is the same for every speed.
(T25) Adjustment Value (ms) = (NVM Input Value - NVM Default Value) / Transport Speed x 1000 x 0.2
(mm step).
711-204 Solenoid ON Timing During Invert Output (T24) 0-20 10 0.2 mm Sets the adjustment time so that the distance (step distance) is the same for every speed.
Adjustment Value (ms) = (NVM Input Value - NVM Default Value) / Transport Speed x 1000 x 0.2
(mm step).
711-205 Feed Motor Reverse Start Time Adjustment Value at 0-20 4 4 ms Default Value: 0 ms, +80 ms/-20 ms, 4 ms increments
Side 2 (T1 ms)
711-209 Invert Start Time Adjustment Value (T6 ms) 0-25 5 4 ms Default Value: 0 ms, +80 ms/-20 ms, 4 ms increments
711-213 DADF Stamp Solenoid ON Time Adjustment 0-20 5 2 ms Default value: 10 ms, +30 ms/-4 ms, 2 ms increments
711-214 DADF Stamp Position Adjustment Side 1 (T23) 0-30 15 0.5 mm Default Value: 0 mm, +7.5 mm/-7.5 mm, approx. 0.5 mm increments
Default Value is 10 mm from Tail Edge

Version 1.1 05/2014 6.3.3 NVM DADF

6-33
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-34 6.3.3 NVM DADF
Table 1 NVM DADF
Setting Default
Chain-Link NVM Name Range Value step Description
711-215 DADF Stamp Position Adjustment Side 2 (T28) 0-40 20 0.2 mm Sets the adjustment time so that the distance (step distance) is the same for every speed.
Adjustment Value (ms) = (NVM Input Value - NVM Default Value) / Transport Speed x 1000 x 0.2
(mm step).
711-220 Usage of DPM Control Parameter Instructed from the 0-1 1 - 0: Cont DPM Parameter Reject
Controller 1: Cont DPM Parameter Accept
711-221 DADF DPM Control Parameter 0-255 101 - 100th Digit: Drive Type (0: High, 1: Middle, 2: Low)
10th Digit: Loop Control
1st Digit: Pre Regist Speed
711-262 DOF Adjustment 0-10 5 - Change the emphasis level of image processing.If 5 is considered as the mid level, as the number
becomes bigger (approaching 10), the emphasis level will become high. As the number becomes
smaller (approaching 0), the emphasis level will become low.
711-272 Side 1 Side Regi Adjustment Value 0-240 120 - Side 1 Side Regi Adjustment Value
(ADF-IIT Combine Adjustment Value Data 3)
711-274 Side 2 Side Regi Adjustment Value 0-240 120 - Side 2 Side Regi Adjustment Value
(ADF-IIT Combine Adjustment Value Data 5)
711-276 ADF-IIT Combine Adjustment Value Data 7 0-255 0 - Adjustment Value Data 7 sent to IIT during ADF-IIT Combine
711-277 ADF-IIT Combine Adjustment Value Data 8 0-255 0 - Adjustment Value Data 8 sent to IIT during ADF-IIT Combine
711-278 ADF-IIT Combine Adjustment Value Data 9 0-255 0 - Adjustment Value Data 9 sent to IIT during ADF-IIT Combine
711-279 ADF-IIT Combine Adjustment Value Data 10 0-255 0 - Adjustment Value Data 10 sent to IIT during ADF-IIT Combine
711-280 ADF-IIT Combine Adjustment Value Data 11 0-255 0 - Adjustment Value Data 11 sent to IIT during ADF-IIT Combine
711-281 ADF-IIT Combine Adjustment Value Data 12 0-255 0 - Adjustment Value Data 12 sent to IIT during ADF-IIT Combine
711-282 ADF-IIT Combine Adjustment Value Data 13 0-255 0 - Adjustment Value Data 13 sent to IIT during ADF-IIT Combine
711-283 ADF-IIT Combine Adjustment Value Data 14 0-255 0 - Adjustment Value Data 14 sent to IIT during ADF-IIT Combine
711-284 ADF-IIT Combine Adjustment Value Data 15 0-255 0 - Adjustment Value Data 15 sent to IIT during ADF-IIT Combine
711-297 Communication Fail Bypass 0-1 0 - 0: Communication Fail Bypass OFF
1: Communication Fail Bypass ON
6.3.4 NVM IIT
Table 1 NVM IIT
Setting Setting
Range Range
(Minimum (Maximum Default
Chain-Link NVM Name Value) Value) Value Read/Write Description
715-010 Energy Saver Disable 0 1 0 O When Setting Value: 0,
At Power OFF: Move the CRG to the W-Ref board position. *Note
At Power ON: Initialize the CRG.
Returning from Energy Saver: Do not initialize the CRG.

When Setting Value: 1,

At Power OFF: Do not move the CRG.
At Power ON: Initialize the CRG.
Returning from Energy Saver: Initialize the CRG.

*Depending on the setting value of 719-999, there might be no movement instead.

For more details, refer to the Meaning column of 719-999.
715-018 Config Fail Bypass 0 1 0 O Controls whether to perform Fail bypass for the [Configuration Check] function of IIT-
Elect Request.
Furthermore, this NVM is not involved with the separate SelectConfig that is performed
internally by the IISS.
0: Fail Bypass OFF
1: Fail Bypass ON
715-020 Number Of APS Sensor 0 1 0 O 0: 1 APS
1: 2 APS
715-030 IIT Failure Part Diagnosis 0 65535 0 O Writing 1 starts the IIT Faulty Parts Diagnosis.
After that, the write value of this NVM will be changed from ’1’ to the presumed faulty
Parts No.
After the Faulty Part Diagnosis has completed, reading this NVM displays the pre-
sumed faulty Part No.
When a Fail occurs during the Faulty Part Diagnosis, the Faulty Part Diagnosis ends
after the Fail code is recorded in this NVM.

* If other than ’1’ has been written, it will follow the usual NVM-Write operation.
(Faulty Parts Diagnosis will not be performed)
715-050 Platen SS Registration Adjustment 16 184 100 O Regi Correction in Slow Scan Direction
"Factory Settings"
715-051 Platen SS Magnification Adjustment 44 56 50 O Slow Scan Direction Regi Correction Value (0.1% increments)
"Factory Settings"
715-053 Platen PRadjF 0 240 120 O Fast Scan Regi Correction Value (Dot)
VLSS = PROMVLSS + (PRadjF -120) X 2
"Factory Settings"
715-092 WREF_ADJ__R 70 255 140 O Red W-Ref correction coefficient, "Factory Settings"
715-093 WREF_ADJ__G 70 255 140 O Green W-Ref correction coefficient, "Factory Settings"
715-094 WREF_ADJ__B 70 255 140 O Blue W-Ref correction coefficient, "Factory Settings"

Version 1.1 05/2014 6.3.4 NVM IIT

6-35
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-36 6.3.4 NVM IIT
Table 1 NVM IIT
Setting Setting
Range Range
(Minimum (Maximum Default
Chain-Link NVM Name Value) Value) Value Read/Write Description
715-095 WREF_ADJ__BWX 70 255 140 O BW-X W-Ref correction coefficient, "Factory Settings"
715-096 WREF_ADJ__BWY 70 255 140 O BW-Y W-Ref correction coefficient, "Factory Settings"
715-097 CVT_Density_Level_ADJ_R 1 255 100 O CVT Scan Density correction coefficient Red (Use 1/100: 100= x1)
715-098 CVT_Density_Level_ADJ_G 1 255 100 O CVT Scan Density correction coefficient Green (Use 1/100)
715-099 CVT_Density_Level_ADJ_B 1 255 100 O CVT Scan Density correction coefficient Green (Use 1/100)
715-100 CVT_Density_Level_ADJ_K 1 255 100 O CVT Scan Density correction coefficient Green (Use 1/100)
715-101 Density_Level_ADJ_RGBK 80 120 100 O Highlight Fine Adjustment (Use 1/100, common for RGBK)
715-102 WREF_Offset_R 0 127 63 O Red W-Ref correction coefficient for each individual paper type.
715-103 WREF_Offset_G 0 127 63 O Green W-Ref correction coefficient for each individual paper type.
715-104 WREF_Offset_B 0 127 63 O Blue W-Ref correction coefficient for each individual paper type.
715-105 WREF_Offset_K 0 127 63 O BW W-Ref correction coefficient for each individual paper type.
715-106 IIT Paper Code 0 8 0 O 0: Use NVM Individual Paper Coefficient
1: J paper 2: P paper 3: C2 paper
4: Green100 paper 5: Digital Color Xpression
6: Color Tech+ 7: Xerox4200 paper
8: Xerox Business
715-110 CVT FS Side 1 Standard Adjustment 0 240 120 O Fast Scan Regi Reference Adjustment Value (0.1 mm/step) during CVT Side 1
"Factory Settings"
At Power ON, this will be overwritten by the DADF NVM (711-272) value.
715-111 CVT FS Side 2 Standard Adjustment 0 240 120 O Fast Scan Regi Reference Adjustment Value (0.1 mm/step) during CVT Side 2
"Factory Settings"
At Power ON, this will be overwritten by the DADF NVM (711-274) value.
715-112 CVT FS Side 3 Standard Adjustment 0 240 120 O Fast Scan Regi Reference Adjustment Value (0.1 mm/step) during CVT Side 3
"Factory Settings"
At Power ON, this will be overwritten by the DADF NVM (711-274) value.
715-113 CVT FS Side 4 Standard Adjustment 0 240 120 O Fast Scan Regi Reference Adjustment Value (0.1 mm/step) during CVT Side 4
"Factory Settings"
At Power ON, this will be overwritten by the DADF NVM (711-274) value.
715-158 DOF correction level DADF 0 10 5 O
715-159 DOF correction level PLT 0 10 5 O
715-165 600dpi centroidal correction level 0 10 5 O
715-166 400dpi centrioidal correction level 0 10 5 O
715-280 HOSEI_SCAN 0 6 3 O b* correction coefficient no., "Factory Settings"
715-281 LED_HOSEI_SCAN 0 19 5 O LED correction coefficient no., "Factory Settings"
Used for parameter selection at ENL
715-282 CCD Calib Y Scan Red 0 1023 O Red when scanning CCD Calib Y Patch (Reflective Ratio LSB)
"Factory Settings"
715-283 CCD Calib Y Scan Green 0 1023 0 O Red when scanning CCD Calib Y Patch (Reflective Ratio LSB)
"Factory Settings"
 Table 1 NVM IIT
Setting Setting
Range Range
(Minimum (Maximum Default
Chain-Link NVM Name Value) Value) Value Read/Write Description
715-284 CCD Calib Y Scan Blue 0 1023 0 O Red when scanning CCD Calib Y Patch (Reflective Ratio LSB)
"Factory Settings"
715-285 CCD Calib M Scan Red 0 1023 0 O Red when scanning CCD Calib Y Patch (Reflective Ratio LSB)
"Factory Settings"
715-286 CCD Calib M Scan Green 0 1023 0 O Red when scanning CCD Calib Y Patch (Reflective Ratio LSB)
"Factory Settings"
715-287 CCD Calib M Scan Blue 0 1023 0 O Red when scanning CCD Calib Y Patch (Reflective Ratio LSB)
"Factory Settings"
715-288 CCD Calib C Scan Red 0 1023 0 O Red when scanning CCD Calib Y Patch (Reflective Ratio LSB)
"Factory Settings"
715-289 CCD Calib C Scan Green 0 1023 0 O Red when scanning CCD Calib Y Patch (Reflective Ratio LSB)
"Factory Settings"
715-290 CCD Calib C Scan Blue 0 1023 0 O Red when scanning CCD Calib Y Patch (Reflective Ratio LSB)
"Factory Settings"
715-291 CCD Calib PK Scan Red 0 1023 0 O Red when scanning CCD Calib Y Patch (Reflective Ratio LSB)
"Factory Settings"
715-292 CCD Calib PK Scan Green 0 1023 0 O Red when scanning CCD Calib Y Patch (Reflective Ratio LSB)
"Factory Settings"
715-293 CCD Calib PK Scan Blue 0 1023 0 O Red when scanning CCD Calib Y Patch (Reflective Ratio LSB)
"Factory Settings"
715-300 A6 / Postcard Detection 0 2 0 O 0: The default in the Table
1: A6 SEF
2: Japanese Postcard SEF (mm series) or Postcard SEF (inch series)
715-302 A4S/8.5in Detection 2 0 6 3 O 0: 210 mm 1: 211 mm 2: 212 mm 3: 213 mm
4: 214 mm 5: 215 mm 6: 216 mm
715-303 B5/8x10 Detection 0 3 0 O 0: The default in the Table
1: Detect as B5 LEF or Executive LEF
2: Detect as 8x10 LEF/8x10.5 LEF Mixed
3: For design verification, performance not guaranteed
715-305 8.5x13/8.5x14 Detection 0 3 0 O 0: The default in the Table
1: For design verification, performance not guaranteed
2: 13 inch
3: 14 inch
715-306 Original detection table for special paper 0 2 0 O 0: Special documents not supported
1: A4 LEF when APS is OFF and A3 when APS in ON
2: Letter LEF when APS is OFF and 17 inch when APS in ON
715-307 Change Size Table 1 5 2 O 1: Inch 13-2
2: mm-2
3: mm
4: Inch 13-1
5: Inch 14

Version 1.1 05/2014 6.3.4 NVM IIT

6-37
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-38 6.3.4 NVM IIT
Table 1 NVM IIT
Setting Setting
Range Range
(Minimum (Maximum Default
Chain-Link NVM Name Value) Value) Value Read/Write Description
715-310 A3/11x17 Detection 0 3 0 O 0: The default in the Table
1: A3 SEF
2: For design verification, performance not guaranteed
3: Detect as A3 SEF/11x17 SEF Mixed
715-311 A4/8.5x11 Detection 0 3 0 O 0: The default in the Table
1: A4 LEF
2: For design verification, performance not guaranteed
3: Detect as 8.5x11 LEF/A4 LEF Mixed
715-312 A6 SEF Threshold 50 110 90 O Changes the Fast Scan direction threshold value for Non-standard, as well as Japa-
nese Postcard SEF, Postcard SEF, and A6 SEF. When other than 50 to 110 has been
set, the Fast Scan direction threshold value is 90 mm.
50: 50 mm
[Down] (1 mm increment/step)
110: 110 mm
715-317 No. of AOC Fail 0 65535 0 O
715-344 Document Size Detection 0 3 0 O (IISS)
0: Detection by 4 registers
1: Detection by 3 registers (countermeasure for dirt)
(IPoC)
0: Detection by 4 registers
1: Detection by 3 registers (countermeasure for dirt); 2 at open + the document edge at
close
2: Detection by 3 registers (countermeasure for dirt); 2 at open + the ladder edge at
close
3: Detection by 2 registers (countermeasure for dirt); 2 at open
715-345 GCO/TFX Size Detection 0 1 1 O 0: GCO (16K/8K = 270x195/270x390)
1: TFX (16K/8K = 267x194/267x388)
715-346 B4/8-Kai Detection 0 6 3 O 0: 256 mm 1: 258 mm 2: 260 mm 3: 262 mm
4: 264 mm 5: 266 mm 6: 268 mm
715-347 8-Kai/11x17 Detection 0 6 3 O 0: 269 mm 1: 271 mm 2: 273 mm 3: 275 mm
4: 277 mm 5: 279 mm 6: 281 mm
715-349 B6/5x7 Detection 0 2 0 O 0: The default in the Table
1: B6 SEF
2: 5x7 SEF
715-418 AOCerr 0 255 0 O No. of times the AOC flow has ended abnormally
6.3.5 NVM 740_IOT Manager List
Table 1 NVM 740_IOT Manager List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
740-002 Cycle Down Timer for Sheet Empty 7000 0 20000 Cycle down timer for Sheet Empty. 1 [ms] O O
Timer for starting Cycle Down after the machine becomes the Sheet Empty status while
printing.
When Cycle Down starts at abnormal failure or when a stop instruction is issued, Cycle
Down starts immediately without using this timer.
740-006 PAR Receive Timeout Error 0 0 255 No. of Sending Timeouts - O O
740-007 PAR Receive Sequence Bit Error 0 0 255 No. of Sequence Bit errors - O O
740-008 PAR Receive Check Sum Error 0 0 255 No. of Check Sum errors - O O
740-009 PAR Send Error 0 0 255 No. of IOT Resends - O O
740-028 ACS Wait Timer 20 0 255 The maximum activation wait time until a color mode is determined when the ACS stan- 100 [ms] O O
dard switching mode is set.
740-029 ACS BW Plate Count 5 3 255 The B/W Continuous Sheets Threshold Value, which is used to judge if the machine Side O O
has switched to the B/W mode when the ACS standard switching mode is set.
740-030 ACS Sheet Read Count 3 0 255 The number of look-ahead sheets, which is used to judge if the machine has switched Sheet O O
to the B/W mode when the ACS standard switching mode is set.
740-033 Normal Smear Countermeasure Switch 0 0 1 Operate in FC Mode without following the instruction from the Controller. - O X
0: OFF, 1: ON
740-034 Heavyweight1 Type Smear Countermeasure 0 0 1 Operate in FC Mode without following the instruction from the Controller. - O X
Switch 0: OFF, 1: ON
740-035 HW Heavyweight Type Smear Countermea- 0 0 1 Operate in FC Mode without following the instruction from the Controller. - O X
sure Switch 0: OFF, 1: ON
740-036 Gloss1 Type Smear Countermeasure 0 0 1 Operate in FC Mode without following the instruction from the Controller. - O X
Switch 0: OFF, 1: ON
740-037 HW Gloss Type Smear Countermeasure 0 0 1 Operate in FC Mode without following the instruction from the Controller. - O X
Switch 0: OFF, 1: ON
740-038 Access Detector Selection Switch 0 0 1 Select Execute/Do not execute the Access Detector. - O X
0: Perform (Accept the SC Prestart Marking from the Controller.)
1: Do not perform (Ignore the SC Prestart Marking from the Controller.)
740-042 Diagnostic Device Data Send Cycle 0 0 12 Send cycle for diagnostic device usage status (Local) - O O
1-12: Send Cycle Time (TIme)
0: Do not send
740-061 EEPROM Information 0 0 2 2: High, 1: Mid, 0: Low - X X
740-109 Productivity Modification Switch (Heavy- 0 0 1 Change the productivity with Heavyweight Smear Countermeasure. - O X
weight Smear Countermeasure)* This is 0: OFF (Do not perform), 1: ON (Perform)
valid only for 25-sheet and 35-sheet models.
740-110 Custom Toner Mode Switch History 0 0 1 Custom Toner Mode Entry History - O X

Version 1.1 05/2014 6.3.5 NVM 740_IOT Manager List

6-39
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-40 6.3.5 NVM 740_IOT Manager List
6.3.6 NVM 742_Paper Handling List
Table 1 NVM 742_Paper Handling List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Protected initialized
742-001 Side Regi Adjustment (ALL) 0 -50 50 Main Scanning Direction Regi Adjustment. ALL (All Tray/Side/Paper type/Effect PS)_0.105[mm/step] O O
Adjustment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-002 Side Regi Adjustment (Tray1 Side1) 0 -50 50 Main Scanning Direction Regi Adjustment. Tray1 Side1 (All Paper Type/Effect PS)_0.105[mm/step] O O
Adjustment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-003 Side Regi Adjustment (Tray2 Side1) 0 -50 50 Main Scanning Direction Regi Adjustment. Tray2 Side1 (All Paper Type/Effect PS)_0.105[mm/step] O O
Adjustment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-006 Side Regi Adjustment (MSI Side1) 0 -50 50 Main Scanning Direction Regi Adjustment. MSI Side1 (All Paper Type/Effect PS)_0.105[mm/step] O O
Adjustment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-021 Side Regi Adjustment (Duplex) 0 -50 50 Main Scanning Direction Regi Adjustment. Duplex (All Tray/Paper Type/Effect PS)_0.105[mm/step] O O
Adjustment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-022 Side Regi Adjustment (Tray1 Side1) 0 -50 50 Main Scanning Direction Regi Adjustment. Tray1 Side2 (All Paper Type/Effect PS)_0.105[mm/step] O O
Adjustment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-023 Side Regi Adjustment (Tray2 Side2) 0 -50 50 Main Scanning Direction Regi Adjustment. Tray2 Side2 (All Paper Type/Effect PS)_0.105[mm/step] O O
Adjustment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-026 Side Regi Adjustment (MSI Side1) 0 -50 50 Main Scanning Direction Regi Adjustment. MSI Side2 (All Paper Type/Effect PS)_0.105[mm/step] O O
Adjustment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-041 Lead Regi Adjustment (ALL) 80 0 160 Sub Scanning Direction Regi Adjustment. ALL (All Tray/Side/Paper Type/Effect PS)_0.126[mm/step] O O
Adjustment
*Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-042 Lead Regi Adjustment (Tray1) 40 0 80 Sub Scanning Direction Regi Adjustment. Tray1 (All Paper Type/Effect PS)_0.126[mm/step] Adjust- O O
ment
*Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-043 Lead Regi Adjustment (Tray2) 40 0 80 Sub Scanning Direction Regi Adjustment. Tray2 (All Paper Type/Effect PS)_0.126[mm/step] Adjust- O O
ment
*Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-046 Lead Regi Adjustment (MSI) 40 0 80 Sub Scanning Direction Regi Adjustment. MSI (All Paper Type/Effect PS)_0.126[mm/step] Adjustment O O
*Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-061 Lead Regi Adjustment (Duplex) 40 0 80 Sub Scanning Direction Regi Adjustment. Duplex (All Tray/Paper Type/effect PS)_0.126[mm/step] O O
Adjustment
*Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-062 No Paper Run & Jam Bypass 0 0 15 0: Normal Mode, 1: Jam Bypass, 2: No Paper Run, 3: IBT Check O O

Version 1.1 05/2014 6.3.6 NVM 742_Paper Handling List

6-41
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-42 6.3.6 NVM 742_Paper Handling List
Table 1 NVM 742_Paper Handling List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Protected initialized
742-064 Side Regi Adjustment (Tray1/Side1/ 0 -50 50 Main Scanning Direction Side Regi Adjustment (Tray1/Side1/Plain/126[mm/s])_0.105[mm/step] Adjust- O O
Plain/126[mm/s]) ment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-065 Side Regi Adjustment (Tray2/Side1/ 0 -50 50 Main Scanning Direction Side Regi Adjustment (Tray2/Side1/Plain/126[mm/s])_0.105[mm/step] Adjust- O O
Plain/126[mm/s]) ment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-066 Side Regi Adjustment 0 -50 50 Main Scanning Direction Side Regi Adjustment (Tray2/Side1/Heavyweight1/126[mm/s])_0.105[mm/ O O
(Tray2/Side1/Heavyweight1/126[mm/ step] Adjustment
s]) *Adjusting the value in the plus (+) direction makes the left margin narrower.
742-067 Side Regi Adjustment 0 -50 50 Main Scanning Direction Side Regi Adjustment (Tray2/Side1/Heavyweight1/63[mm/s])_0.105[mm/step] O O
(Tray2/Side1/Heavyweight1/63[mm/s]) Adjustment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-068 Side Regi Adjustment 0 -50 50 Main Scanning Direction Side Regi Adjustment (Tray2/Side1/Extra Heavyweight/63[mm/s])_0.105[mm/ O O
(Tray2/Side1/Extra Heavyweight/ step] Adjustment
63[mm/s]) *Adjusting the value in the plus (+) direction makes the left margin narrower.
742-069 Side Regi Adjustment (Tray2/Side1/ 0 -50 50 Main Scanning Direction Side Regi Adjustment (Tray2/Side1/Labels1/126[mm/s])_0.105[mm/ O O
Labels1/126[mm/s]) step]Adjustment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-070 Side Regi Adjustment (Tray2/Side1/ 0 -50 50 Main Scanning Direction Side Regi Adjustment (Tray2/Side1/Labels1/63[mm/s])_0.105[mm/ O O
Labels1/63[mm/s]) step]Adjustment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-071 Side Regi Adjustment (Tray2/Side1/HW 0 -50 50 Main Scanning Direction Side Regi Adjustment (Tray2/Side1/HW Labels/63[mm/s])_0.105[mm/ O O
Labels/63[mm/s]) step]Adjustment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-072 Side Regi Adjustment 0 -50 50 Main Scanning Direction Side Regi Adjustment (MSI/Side1/Plain/126[mm/s])_0.105[mm/step] Adjust- O O
(MSI/Side1/Plain/126[mm/s]) ment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-073 Side Regi Adjustment 0 -50 50 Main Scanning Direction Side Regi Adjustment (MSI/Side1/Heavyweight1/126[mm/s])_0.105[mm/step] O O
(MSI/Side1/Heavyweight1/126[mm/s]) Adjustment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-074 Side Regi Adjustment 0 -50 50 Main Scanning Direction Side Regi Adjustment (MSI/Side1/Heavyweight1/63[mm/s])_0.105[mm/step] O O
(MSI/Side1/Heavyweight1/63[mm/s]) Adjustment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-075 Side Regi Adjustment 0 -50 50 Main Scanning Direction Side Regi Adjustment (MSI/Side1/Extra Heavyweight/63[mm/s])_0.105[mm/ O O
(MSI/Side1/Extra Heavyweight/63[mm/ step] Adjustment
s]) *Adjusting the value in the plus (+) direction makes the left margin narrower.
742-076 Side Regi Adjustment (MSI/Side1/ 0 -50 50 Main Scanning Direction Side Regi Adjustment (MSI/Side1/Labels1/126[mm/s])_0.105[mm/step] O O
Labels1/126[mm/s]) Adjustment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-077 Side Regi Adjustment (MSI/Side1/ 0 -50 50 Main Scanning Direction Side Regi Adjustment (MSI/Side1/Labels1/63[mm/s])_0.105[mm/step] Adjust- O O
Labels1/63[mm/s]) ment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
 Table 1 NVM 742_Paper Handling List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Protected initialized
742-078 Side Regi Adjustment (MSI/Side1/ 0 -50 50 Main Scanning Direction Side Regi Adjustment (MSI/Side1/Labels2/63[mm/s])_0.105[mm/step] Adjust- O O
Labels2/63[mm/s]) ment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-079 Side Regi Adjustment (Tray1/Side2/ 0 -50 50 Main Scanning Direction Side Regi Adjustment (Tray1/Side2/Plain/126[mm/s])_0.105[mm/step] Adjust- O O
Plain/126[mm/s]) ment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-080 Side Regi Adjustment (Tray2/Side2/ 0 -50 50 Main Scanning Direction Side Regi Adjustment (Tray2/Side2/Plain/126[mm/s])_0.105[mm/step] Adjust- O O
Plain/126[mm/s]) ment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-081 Side Regi Adjustment 0 -50 50 Main Scanning Direction Side Regi Adjustment (Tray2/Side2/Heavyweight1/126[mm/s])_0.105[mm/ O O
(Tray2/Side2/Heavyweight1/126[mm/ step] Adjustment
s]) *Adjusting the value in the plus (+) direction makes the left margin narrower.
742-082 Side Regi Adjustment 0 -50 50 Main Scanning Direction Side Regi Adjustment (Tray2/Side2/Heavyweight1/63[mm/s])_0.105[mm/step] O O
(Tray2/Side2/Heavyweight1/63[mm/s]) Adjustment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-083 Side Regi Adjustment 0 -50 50 Main Scanning Direction Side Regi Adjustment (MSI/Side2/Plain/126[mm/s])_0.105[mm/step] Adjust- O O
(MSI/Side2/Plain/126[mm/s]) ment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-084 Side Regi Adjustment 0 -50 50 Main Scanning Direction Side Regi Adjustment (MSI/Side2/Heavyweight1/126[mm/s])_0.105[mm/step] O O
(MSI/Side2/Heavyweight1/126[mm/s]) Adjustment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-085 Side Regi Adjustment 0 -50 50 Main Scanning Direction Side Regi Adjustment (MSI/Side2/Heavyweight1/63[mm/s])_0.105[mm/step] O O
(MSI/Side2/Heavyweight1/63[mm/s]) Adjustment
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-086 Side Regi Adjustment 0 -4 4 Main Scanning Direction from the UI Side Regi Adjustment (MSI)_0.525[mm/step] Adjustment O O
(UI Adjustment ValueMSI) (=0.105mm/stepX5step)
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-087 Side Regi Adjustment 0 -4 4 Main Scanning Direction from the UI Side Regi Adjustment (Tray1)_0.525[mm/step] Adjustment O O
(UI Adjustment Value Tray1) (=0.105mm/stepX5step)
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-088 Side Regi Adjustment 0 -4 4 Main Scanning Direction from the UI Side Regi Adjustment (Tray2)_0.525[mm/step] Adjustment O O
(UI Adjustment Value Tray2) (=0.105mm/stepX5step)
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-089 Side Regi Adjustment 0 -4 4 Main Scanning Direction from the UI Side Regi Adjustment (Duplex)_0.525[mm/step] Adjustment O O
(UI Adjustment Value Duplex) (=0.105mm/stepX5step)
*Adjusting the value in the plus (+) direction makes the left margin narrower.
742-090 Side Regi Adjustment 0 -50 50 Side Regi Adjustment Value when delivering the Tray Module (Tray2)_0.105[mm/step] units X O
(Tray2 Delivery Adjustment Value)
742-091 Lead Regi Adjustment 40 0 80 Sub Scanning Direction Regi Adjustment (Tray1/Plain/126[mm/s])_0.126[mm/step] Adjustment O O
(Tray1/Plain/126[mm/s]) *Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-092 Lead Regi Adjustment 40 0 80 Sub Scanning Direction Regi Adjustment (Tray2/Plain/126[mm/s])_0.126[mm/step] Adjustment O O
(Tray2/Plain/126[mm/s]) *Adjusting the value in the plus (+) direction makes the lead edge margin wider.

Version 1.1 05/2014 6.3.6 NVM 742_Paper Handling List

6-43
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-44 6.3.6 NVM 742_Paper Handling List
Table 1 NVM 742_Paper Handling List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Protected initialized
742-093 Lead Regi Adjustment 40 0 80 Sub Scanning Direction Regi Adjustment (Tray2/Heavyweight1/126[mm/s])_0.126[mm/step] Adjust- O O
(Tray2/Heavyweight1/126[mm/s]) ment
*Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-094 Lead Regi Adjustment 40 0 80 Sub Scanning Direction Regi Adjustment (Tray2/Heavyweight1/63[mm/s])_0.126[mm/step] Adjustment O O
(Tray2/Heavyweight1/63[mm/s]) *Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-095 Lead Regi Adjustment 40 0 80 Sub Scanning Direction Regi Adjustment (Tray2/Extra Heavyweight/63[mm/s])_0.126[mm/step] Adjust- O O
(Tray2/Extra Heavyweight/63[mm/s]) ment
*Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-096 Lead Regi Adjustment 40 0 80 Sub Scanning Direction Regi Adjustment (Tray2/Labels1/126[mm/s])_0.126[mm/step] Adjustment O O
(Tray2/Labels1/126[mm/s]) *Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-097 Lead Regi Adjustment 40 0 80 Sub Scanning Direction Regi Adjustment (Tray2/Labels1/63[mm/s])_0.126[mm/step] Adjustment O O
(Tray2/Labels1/63[mm/s]) *Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-098 Lead Regi Adjustment 40 0 80 Sub Scanning Direction Regi Adjustment (Tray2/Labels2/63[mm/s])_0.126[mm/step] Adjustment O O
(Tray2/Labels2/63[mm/s]) *Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-099 Lead Regi Adjustment 40 0 80 Sub Scanning Direction Regi Adjustment (MSI/Plain/126[mm/s])_0.126[mm/step] Adjustment O O
(MSI/Plain/126[mm/s]) *Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-100 Lead Regi Adjustment 40 0 80 Sub Scanning Direction Regi Adjustment (MSI/Heavyweight1/126[mm/s])_0.126[mm/step] Adjustment O O
(MSI/Heavyweight1/126[mm/s]) *Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-101 Lead Regi Adjustment 40 0 80 Sub Scanning Direction Regi Adjustment (MSI/Heavyweight1/63[mm/s])_0.126[mm/step] Adjustment O O
(MSI/Heavyweight1/63[mm/s]) *Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-102 Lead Regi Adjustment 40 0 80 Sub Scanning Direction Regi Adjustment (MSI/Extra Heavyweight/63[mm/s])_0.126[mm/step] Adjust- O O
(MSI/Extra Heavyweight/63[mm/s]) ment
*Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-103 Lead Regi Adjustment 40 0 80 Sub Scanning Direction Regi Adjustment (MSI/Labels1/126[mm/s])_0.126[mm/step] Adjustment O O
(MSI/Labels1/126[mm/s]) *Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-104 Lead Regi Adjustment 40 0 80 Sub Scanning Direction Regi Adjustment (MSI/Labels1/63[mm/s])_0.126[mm/step] Adjustment O O
(MSI/Labels1/63[mm/s]) *Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-105 Lead Regi Adjustment 40 0 80 Sub Scanning Direction Regi Adjustment (MSI/Labels2/63[mm/s])_0.126[mm/step] Adjustment O O
(MSI/Labels2/63[mm/s]) *Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-106 Lead Regi Adjustment 40 0 80 Sub Scanning Direction Regi Adjustment (Duplex/Plain/126[mm/s])_0.126[mm/step] Adjustment O O
(Duplex/Plain/126[mm/s]) *Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-107 Lead Regi Adjustment 40 0 80 Sub Scanning Direction Regi Adjustment (Duplex/Heavyweight1/126[mm/s])_0.126[mm/step] Adjust- O O
(Duplex/Heavyweight1/126[mm/s]) ment
*Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-108 Lead Regi Adjustment 40 0 80 Sub Scanning Direction Regi Adjustment (Duplex/Heavyweight1/63[mm/s])_0.126[mm/step] Adjust- O O
(Duplex/Heavyweight1/63[mm/s]) ment
*Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-109 Lead Regi Adjustment 0 -4 4 Sub Scanning Direction from the UI Regi Adjustment (MSI)_0.504[mm/step] Adjustment (=0.126mm/ O O
(UI Adjustment ValueMSI) stepX4step)
*Adjusting the value in the plus (+) direction makes the lead edge margin wider.
 Table 1 NVM 742_Paper Handling List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Protected initialized
742-110 Lead Regi Adjustment 0 -4 4 Sub Scanning Direction from the UI Regi Adjustment (Tray1)_0.504[mm/step] Adjustment (=0.126mm/ O O
(UI Adjustment Value Tray1) stepX4step)
*Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-111 Lead Regi Adjustment 0 -4 4 Sub Scanning direction from the UI Regi Adjustment (Tray2)_0.504[mm/step] Adjustment (=0.126mm/ O O
(UI Adjustment Value Tray2) stepX4step)
*Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-112 Lead Regi Adjustment 0 -4 4 Sub Scanning Direction from the UI Regi Adjustment (Duplex)_0.504[mm/step] Adjustment O O
(UI Adjustment Value Duplex) (=0.126mm/stepX4step)
*Adjusting the value in the plus (+) direction makes the lead edge margin wider.
742-114 Dup Option Availability Switch 0 0 1 Decide whether the Dup Unit is present or not. O X
0: Dup Option No, 1: Dup Option Yes
742-117 Tray1 Feed Control Start Timing 1st 0 -100 100 Tray1 Feed Start Timing Adjustment (126[mm/s]) 1st page_1[ms/step] Adjustment O O
page (126[mm/s]) (Feed Start~"Tray1 *Adjusting the value in the plus (+) direction delays the Feed Start timing.
Feed Clutch On") +/-100ms Adjustment possible as 0 = -1350.
742-118 Tray1 Feed Control Start Timing 2nd 0 -100 100 Tray1 Feed Start Timing Adjustment (126[mm/s]) 2nd page and after_1[ms/step] Adjustment O O
page and after (126[mm/s]) (Feed- *Adjusting the value in the plus (+) direction delays the Feed Start timing.
Start~"Tray1 Feed Clutch On") +/-100ms Adjustment possible as 0 = -1150.
742-119 Tray2 Feed Control Start Timing 0 -25 100 Tray2 Feed Start Timing Adjustment (63[mm/s])_2[ms/step] Adjustment O O
(63[mm/s]) (Feed Start~"Feed Req *Adjusting the value in the plus (+) direction delays the Feed Start timing.
Command On")
742-120 Tray2 Feed Control Start Timing 0 -25 100 Tray2 Feed Start Timing Adjustment (126[mm/s])_2[ms/step] Adjustment O O
(126[mm/s]) (Feed Start~"Feed Req *Adjusting the value in the plus (+) direction delays the Feed Start timing.
Command On")
742-121 MSI Feed Control Start Timing (63[mm/ 0 -100 100 MSI Feed Start Timing Adjustment (63[mm/s]/Other than Plain)_1[ms/step] Adjustment O O
s]) (Feed Start~"MSI Feed Clutch On") *Adjusting the value in the plus (+) direction delays the Feed Start timing.
+/-100ms Adjustment possible as 0 = -2910.
742-122 MSI Feed Control Start Timing 0 -100 100 MSI Feed Start Timing Adjustment (126[mm/s]/Plain)_1[ms/step] Adjustment O O
(126[mm/s]) (Feed Start~"MSI Feed *Adjusting the value in the plus (+) direction delays the Feed Start timing.
Clutch On") +/-100ms Adjustment possible as 0 = -1530.
742-137 PreRegi Start Timing (Tray2/63[mm/s]) 0 -100 100 TM Takeaway Motor Drive Timing Adjustment (Tray 2/63[mm/s]). O O
("Tray2 Feed Start" ~ "TM TA Control *This parameter is notified to the TM through the communication at P-ON.
Start") Adjusts by 2[ms/step].
742-138 PreRegi Start Timing (Tray2/126[mm/ 0 -100 100 TM Takeaway Motor Drive Timing Adjustment (Tray 2/126[mm/s]). O O
s]) ("Tray2 Feed Start" ~ "TM TA Con- *This parameter is notified to the TM through the communication at P-ON.
trol Start") Adjusts by 2[ms/step].
742-141 Loop Amount Adjustment 0 -125 125 Adjusts the timing of when the Dup Control should stop after the Regi Snr ON (ALL)_1[ms/step] Adjust- O O
(ALL) ment
("Regi Snr On Detection"~"Regi Loop *This NVM is used in the Individual Support mode.
Control Stop") *The Invert Mot will only engage in single sheet feed mode.
*Adjusting the value in the plus (+) direction delays the timing.

Version 1.1 05/2014 6.3.6 NVM 742_Paper Handling List

6-45
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-46 6.3.6 NVM 742_Paper Handling List
Table 1 NVM 742_Paper Handling List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Protected initialized
742-142 Loop Amount Adjustment 0 -125 125 Adjusts the timing of when the Tray1 Feed CL should stop after the Regi Snr ON (Tray1/126[mm/s]/ O X
(Tray 1/126[mm/s]/Plain); Plain)
("Regi Snr On Detection"~"Tray1 Feed Adjusts by 1[ms/step].
CL Stop") *Adjusting the value in the plus (+) direction delays the Tray1 Feed CLL OFF timing.
+/-125ms Adjustment possible as 0 = 157.
742-143 Loop Amount Adjustment 0 -125 125 Adjusts the timing of when the TM Regi should stop after the Regi Snr ON (Tray2/126[mm/s]/Plain) O X
(Tray 2/126[mm/s]/Plain) Adjusts by 1[ms/step].
("Regi Snr On Detection"~"TM Regi *Adjusting the value in the plus (+) direction delays the TM Regi Stop (HotLine) ON timing.
Stop") +/-125ms Adjustment possible as 0 = 138.
742-144 Loop Amount Adjustment -21 -125 125 Adjusts the timing of when the TM Regi should stop after the Regi Snr ON (Tray2/126[mm/s]/Heavy- O X
(Tray 2/126[mm/s]/Extra Heavyweight) weight)
("Regi Snr On Detection"~"TM Regi Adjusts by 1[ms/step].
Stop") *Adjusting the value in the plus (+) direction delays the TM Regi Stop (HotLine) ON timing.
+/-125ms Adjustment possible as 0 = 138.
742-145 Loop Amount Adjustment -21 -125 125 Adjusts the timing of when the TM Regi should stop after the Regi Snr ON (Tray2/63[mm/s]/Heavy- O X
(Tray 2/63[mm/s]/Extra Heavyweight) weight)
("Regi Snr On Detection"~TM Regi Adjusts by 1[ms/step].
Stop") *Adjusting the value in the plus (+) direction delays the TM Regi Stop (HotLine) ON timing.
+/-125ms Adjustment possible as 0 = 138.
742-146 Loop Amount Adjustment -32 -125 125 Adjusts the timing of when the TM Regi should stop after the Regi Snr ON (Tray2/63[mm/s]/Extra O X
(Tray 2/63[mm/s]/Extra Heavyweight) Heavyweight)
("Regi Snr On Detection"~"TM Regi Adjusts by 1[ms/step].
Stop") *Adjusting the value in the plus (+) direction delays the TM Regi Stop (HotLine) ON timing.
+/-125ms Adjustment possible as 0 = 138.
742-147 Loop Amount Adjustment -24 -125 125 Adjusts the timing of when the TM Regi should stop after the Regi Snr ON (Tray2/126[mm/s]/Labels) O X
(Tray 2/126[mm/s]/HW Labels) Adjusts by 1[ms/step].
("Regi Snr On Detection"~"TM Regi *Adjusting the value in the plus (+) direction delays the TM Regi Stop (HotLine) ON timing.
Stop") +/-125ms Adjustment possible as 0 = 138.
742-148 Loop Amount Adjustment -24 -125 125 Adjusts the timing of when the TM Regi should stop after the Regi Snr ON (Tray2/63[mm/s]/Labels) O X
(Tray 2/63[mm/s]/HW Labels) Adjusts by 1[ms/step].
("Regi Snr On Detection"~"TM Regi *Adjusting the value in the plus (+) direction delays the TM Regi Stop (HotLine) ON timing.
Stop") +/-125ms Adjustment possible as 0 = 138.
742-149 Loop Amount Adjustment -24 -125 125 Adjusts the timing of when the TM Regi should stop after the Regi Snr ON (Tray2/63[mm/s]/Labels2) O X
(Tray 2/63[mm/s]/HW Labels) Adjusts by 1[ms/step].
("Regi Snr On Detection"~"TM Regi *Adjusting the value in the plus (+) direction delays the TM Regi Stop (HotLine) ON timing.
Stop") +/-125ms Adjustment possible as 0 = 138.
742-150 Loop Amount Adjustment -16 -125 125 Adjusts the timing of when the MSI Feed CL should stop after the Regi Snr ON (Tray1/126[mm/s]/Plain) O X
(MSI/126[mm/s]/Plain) Adjusts by 1[ms/step].
("Regi Snr On detection"~"MSI Feed *Adjusting the value in the plus (+) direction delays the Tray1 Feed CLL OFF timing.
CL Stop") +/-125ms Adjustment possible as 0 = 157.
 Table 1 NVM 742_Paper Handling List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Protected initialized
742-151 Loop Amount Adjustment 0 -125 125 Adjusts the timing of when the MSI Feed CL should stop after the Regi Snr ON (MSI/126[mm/s]/Heavy- O X
(MSI/126[mm/s]/Heavyweight) weight)
("Regi Snr On detection"~"MSI Feed Adjusts by 1[ms/step].
CL Stop") *Adjusting the value in the plus (+) direction delays the MSI Feed CLL OFF timing.
+/-125ms Adjustment possible as 0 = 157.
742-152 Loop Amount Adjustment 0 -125 125 Adjusts the timing of when the MSI Feed CL should stop after the Regi Snr ON (Tray1/63[mm/s]/Heavy- O X
(MSI/63[mm/s]/Heavyweight) weight)
("Regi Snr On detection"~"MSI Feed Adjusts by 1[ms/step].
CL Stop") *Adjusting the value in the plus (+) direction delays the MSI Feed CLL OFF timing.
+/-125ms Adjustment possible as 0 = 314.
742-153 Loop Amount Adjustment 0 -125 125 Adjusts the timing of when the MSI Feed CL should stop after the Regi Snr ON (Tray1/63[mm/s]/Heavy- O X
(MSI/63[mm/s]/Extra Heavyweight) weight)
("Regi Snr On detection"~"MSI Feed Adjusts by 1[ms/step].
CL Stop") *Adjusting the value in the plus (+) direction delays the MSI Feed CLL OFF timing.
+/-125ms Adjustment possible as 0 = 314.
742-154 Loop Amount Adjustment 0 -125 125 Adjusts the timing of when the MSI Feed CL should stop after the Regi Snr ON (MSI/126[mm/s]/Labels) O X
(MSI/126[mm/s]/Labels) Adjusts by 1[ms/step].
("Regi Snr On detection"~"MSI Feed *Adjusting the value in the plus (+) direction delays the MSI Feed CLL OFF timing.
CL Stop") +/-125ms Adjustment possible as 0 = 157.
742-155 Loop Amount Adjustment 0 -125 125 Adjusts the timing of when the MSI Feed CL should stop after the Regi Snr ON (MSI/63[mm/s]/Labels) O X
(MSI/63[mm/s]/Labels) Adjusts by 1[ms/step].
("Regi Snr On detection"~"MSI Feed *Adjusting the value in the plus (+) direction delays the MSI Feed CLL OFF timing.
CL Stop") +/-125ms Adjustment possible as 0 = 314.
742-156 Loop Amount Adjustment 0 -125 125 Adjusts the timing of when the MSI Feed CL should stop after the Regi Snr ON (MSI/63[mm/s]/Labels2) O X
(MSI/63[mm/s]/HW Labels) Adjusts by 1[ms/step].
("Regi Snr On detection"~"MSI Feed *Adjusting the value in the plus (+) direction delays the MSI Feed CLL OFF timing.
CL Stop") +/-125ms Adjustment possible as 0 = 157.
742-157 Loop Amount Adjustment -16 -125 125 Adjusts the timing of when the Duplex CL should stop after the Regi Snr ON (Duplex/126[mm/s]/Plain) O O
(Duplex/126[mm/s]/Plain); Adjusts by 1[ms/step].
("Regi Snr On Detection"~"Dup CL *Adjusting the value in the plus (+) direction delays the Duplex Clutch OFF timing.
Stop") +/-125ms Adjustment possible as 0 = 157.
742-158 Loop Amount Adjustment -48 -125 125 Adjusts the timing of when the Duplex CL should stop after the Regi Snr ON (Duplex/126[mm/s]/Heavy- O O
(Duplex/126[mm/s]/Heavyweight); weight)
("Regi Snr On Detection"~"Dup CL Adjusts by 1[ms/step].
Stop") *Adjusting the value in the plus (+) direction delays the Duplex Clutch OFF timing.
+/-125ms Adjustment possible as 0 = 157.
742-159 Loop Amount Adjustment -96 -125 125 Adjusts the timing of when the Duplex CL should stop after the Regi Snr ON (Duplex/63[mm/s]/Heavy- O O
(Duplex/63[mm/s]/Heavyweight); weight)
("Regi Snr On Detection"~"Dup CL Adjusts by 1[ms/step].
Stop") *Adjusting the value in the plus (+) direction delays the Duplex Clutch OFF timing.
+/-125ms Adjustment possible as 0 = 314.

Version 1.1 05/2014 6.3.6 NVM 742_Paper Handling List

6-47
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-48 6.3.6 NVM 742_Paper Handling List
Table 1 NVM 742_Paper Handling List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Protected initialized
742-160 Loop Amount Adjustment 0 -125 125 Adjusts the timing of when the Invert Motor should stop after the Regi Snr ON (Invert/126[mm/s]/Plain) O O
(Invert/126[mm/s]/Plain) *Only engage in single sheet feed mode.
("Regi Snr On Detection"~"Invert Motor Adjusts by 1[ms/step].
Stop") *Adjusting the value in the plus (+) direction delays the Invert Motor Stop timing.
+/-125ms Adjustment possible as 0 = 137.
742-161 Loop Amount Adjustment 0 -125 125 Adjusts the timing of when the Invert Motor should stop after the Regi Snr ON (Invert/126[mm/s]/ O O
(Invert/126[mm/s]/Heavyweight1) Heavyweight1)
("Regi Snr On Detection"~"Invert Motor *Only engage in single sheet feed mode.
Stop") Adjusts by 1[ms/step].
*Adjusting the value in the plus (+) direction delays the Invert Motor Stop timing.
+/-125ms Adjustment possible as 0 = 137.
742-162 Loop Amount Adjustment 0 -125 125 Adjusts the timing of when the Invert Motor should stop after the Regi Snr ON (Invert/63[mm/s]/ O O
(Invert/63[mm/s]/Heavyweight1) Heavyweight1)
("Regi Snr On Detection"~"Invert Motor *Only engage in single sheet feed mode.
Stop") Adjusts by 1[ms/step].
*Adjusting the value in the plus (+) direction delays the Invert Motor Stop timing.
+/-125ms Adjustment possible as 0 = 306.
742-163 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (Tray1/MSI/Common Tray2) O O
(Tray1/MSI/Tray2 Common) **Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-164 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (MSI)_1[mm/step] O O
(MSI) **Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-165 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (Tray2)_1[mm/step] O O
(Tray2) **Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-166 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (1G)_1[mm/step] O O
(1G) **Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-167 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (2G)_1[mm/step] O O
(2G) **Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-168 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (3G)_1[mm/step] O O
(3G) **Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-169 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (4G)_1[mm/step] O O
(4G) **Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-170 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (Tray1/126[mm/s]/Plain)_1[mm/step] O O
(Tray 1/126[mm/s]/Plain); **Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-171 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (MSI/126[mm/s]/Plain)_1[mm/step] O O
(MSI/126[mm/s]/Plain) **Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-172 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (MSI/63[mm/s]/Heavyweight)_1[mm/ O O
(MSI/63[mm/s]/Heavyweight) step]
**Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-173 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (MSI/126[mm/s]/Heavyweight)_1[mm/ O O
(MSI/126[mm/s]/Heavyweight) step]
**Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
 Table 1 NVM 742_Paper Handling List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Protected initialized
742-174 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (MSI/63[mm/s]/Extra Heavy- O O
(MSI/63[mm/s]/Extra Heavyweight) weight)_1[mm/step]
**Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-175 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (MSI/63[mm/s]/Labels1)_1[mm/step] O O
(MSI/63[mm/s]/Labels1) **Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-176 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (MSI/126[mm/s]/Labels1)_1[mm/step] O O
(MSI/126[mm/s]/Labels1) **Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-177 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (MSI/63[mm/s]/Labels2)_1[mm/step] O O
(MSI/63[mm/s]/Labels2) **Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-178 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (Tray2/126[mm/s]/Plain)_1[mm/step] O O
(Tray 2/126[mm/s]/Plain) **Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-179 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (Tray2/63[mm/s]/Heavyweight)_1[mm/ O O
(Tray 2/63[mm/s]/Extra Heavyweight) step]
**Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-180 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (Tray2/126[mm/s]/Heavyweight)_1[mm/ O O
(Tray 2/126[mm/s]/Extra Heavyweight) step]
**Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-181 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (Tray2/63[mm/s]/Extra Heavy- O O
(Tray 2/63[mm/s]/Extra Heavyweight) weight)_1[mm/step]
**Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-182 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (Tray2/63[mm/s]/Labels1)_1[mm/step] O O
(Tray2/63[mm/s]/Labels1) **Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-183 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (Tray2/126[mm/s]/Labels1)_1[mm/step] O O
(Tray2/126[mm/s]/Labels1) **Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-184 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (Tray2/63[mm/s]/Labels2)_1[mm/step] O O
(Tray2/63[mm/s]/Labels2) **Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-185 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (Duplex/126[mm/s]/Plain)_1[mm/step] O O
(Duplex/126[mm/s]/Plain); **Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-186 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (Duplex/63[mm/s]/Heavyweight)_1[mm/ O O
(Duplex/63[mm/s]/Heavyweight); step]
**Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-187 Regi Assist Start Timing Adjustment 0 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (Duplex/126[mm/s]/Heavyweight)_1[mm/ O O
(Duplex/126[mm/s]/Heavyweight); step]
**Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-188 Regi Assist Start Timing Adjustment -18 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (Invert/126[mm/s]/Plain)_1[mm/step] O O
(Invert/126[mm/s]/Plain) **Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-189 Regi Assist Start Timing Adjustment 28 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (Invert/63[mm/s]/Heavyweight)_1[mm/ O O
(Invert/63[mm/s]/Heavyweight1) step]
**Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.
742-190 Regi Assist Start Timing Adjustment -18 -127 127 Adjusts the Assist Operation start timing when Regi is ejected (Invert/126[mm/s]/Heavyweight)_1[mm/ O O
(Invert/126[mm/s]/Heavyweight1) step]
**Adjusting the value in the plus (+) direction delays the Assist Operation Start timing.

Version 1.1 05/2014 6.3.6 NVM 742_Paper Handling List

6-49
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-50 6.3.6 NVM 742_Paper Handling List
Table 1 NVM 742_Paper Handling List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Protected initialized
742-191 Regi Assist Stop Timing Adjustment 0 0 961 Adjusts the timing of Regi Feed start to stop (Tray1/Common MSI)_1[ms/step] O O
(Tray1/MSI Common) *Adjusting the value in the plus (+) direction delays the Stop timing.
742-192 Regi Assist Stop Timing Adjustment 0 0 961 Adjusts the timing of Regi Feed start to stop (MSI)_1[ms/step] O O
(MSI) *Adjusting the value in the plus (+) direction delays the Stop timing.
742-193 Regi Assist Stop Timing Adjustment 0 0 961 Adjusts the timing of Regi Feed start to stop (1G)_1[ms/step] O O
(1G) *Adjusting the value in the plus (+) direction delays the Stop timing.
742-194 Regi Assist Stop Timing Adjustment 0 0 961 Adjusts the timing of Regi Feed start to stop (2G)_1[ms/step] O O
(2G) *Adjusting the value in the plus (+) direction delays the Stop timing.
742-195 Regi Assist Stop Timing Adjustment 0 0 961 Adjusts the timing of Regi Feed start to stop (3G)_1[ms/step] O O
(3G) *Adjusting the value in the plus (+) direction delays the Stop timing.
742-196 Regi Assist Stop Timing Adjustment 0 0 961 Adjusts the timing of Regi Feed start to stop (4G)_1[ms/step] O O
(4G) *Adjusting the value in the plus (+) direction delays the Stop timing.
742-197 Regi Assist Stop Timing Adjustment 0 0 395 Adjusts the timing of when the Tray1 Feed CL should stop after the Regi Feed starts (Tray1/126[mm/s]/ O O
(Tray 1/126[mm/s]/Plain); Plain)
Adjusts by 1[ms/step].
*Adjusting the value in the plus (+) direction delays the Tray1 Feed CLL OFF timing.
742-198 Regi Assist Stop Timing Adjustment 0 0 526 Adjusts the timing of when the MSI Feed CL should stop after the Regi Feed starts (MSI/126[mm/s]/ O O
(MSI/126[mm/s]/Plain) Plain)
Adjusts by 1[ms/step].
*Adjusting the value in the plus (+) direction delays the MSI Feed CLL OFF timing.
742-199 Regi Assist Stop Timing Adjustment 0 0 961 Adjusts the timing of when the MSI Feed CL should stop after the Regi Feed starts (MSI/126[mm/s]/ O O
(MSI/63[mm/s]/Heavyweight) Heavyweight1)
Adjusts by 1[ms/step].
*Adjusting the value in the plus (+) direction delays the MSI Feed CLL OFF timing.
742-200 Regi Assist Stop Timing Adjustment 0 0 526 Adjusts the timing of when the MSI Feed CL should stop after the Regi Feed starts (MSI/126[mm/s]/ O O
(MSI/126[mm/s]/Heavyweight) Heavyweight1)
Adjusts by 1[ms/step].
*Adjusting the value in the plus (+) direction delays the MSI Feed CLL OFF timing.
742-201 Regi Assist Stop Timing Adjustment 0 0 961 Adjusts the timing of when the MSI Feed CL should stop after the Regi Feed starts (MSI/63[mm/s]/ O O
(MSI/63[mm/s]/Extra Heavyweight) Extra Heavyweight)
Adjusts by 1[ms/step].
*Adjusting the value in the plus (+) direction delays the MSI Feed CLL OFF timing.
742-202 Regi Assist Stop Timing Adjustment 0 0 961 Adjusts the timing of when the MSI Feed CL should stop after the Regi Feed starts (MSI/126[mm/s]/ O O
(MSI/63[mm/s]/Labels1) Labels1)
Adjusts by 1[ms/step].
*Adjusting the value in the plus (+) direction delays the MSI Feed CLL OFF timing.
742-203 Regi Assist Stop Timing Adjustment 0 0 526 Adjusts the timing of when the MSI Feed CL should stop after the Regi Feed starts (MSI/126[mm/s]/ O O
(MSI/126[mm/s]/Labels1) Labels1)
Adjusts by 1[ms/step].
*Adjusting the value in the plus (+) direction delays the MSI Feed CLL OFF timing.
 Table 1 NVM 742_Paper Handling List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Protected initialized
742-204 Regi Assist Stop Timing Adjustment 0 0 961 Adjusts the timing of when the MSI Feed CL should stop after the Regi Feed starts (MSI/126[mm/s]/ O O
(MSI/63[mm/s]/Labels2) Labels2)
Adjusts by 1[ms/step].
*Adjusting the value in the plus (+) direction delays the MSI Feed CLL OFF timing.
742-205 Registration Operation Stop Timing 0 0 100 Regi CL Stop Timing Adjustment (63[mm/s])_1[ms/step] Adjustment O O
(63[mm/s]) +/-100ms Adjustment possible as 0 = 165.
(Regi Snr Off)(RT4)
742-206 Registration Operation Stop Timing 0 0 100 Regi CL Stop Timing Adjustment (126[mm/s])_1[ms/step] Adjustment O O
(126[mm/s]) +/-100ms Adjustment possible as 0 = 83.
(Regi Snr Off)(RT4)
742-207 Invert Motor Current Value Weak Cur- 2 0 15 Invert Motor Weak Current Value O O
rent 0.1[A] Adjustment
742-208 Invert Motor Current Value Mid-current 4 0 15 Invert Motor Mid-current Value (63[mm/s]) O O
(63[mm/s]) 0.1[A] Adjustment
742-209 Invert Motor Current Value Weak Cur- 4 0 15 Invert Motor Weak Current Value (126[mm/s]) O O
rent (126[mm/s]) 0.1[A] Adjustment
742-210 CW->CCW Switch Timing (126[mm/s]/ -48 -100 100 Adjusts the timing of when the Invert Motor forward rotation should stop for the purpose of paper inver- O O
Plain)(IT3) sion after the paper transport Exit Sensor 1 Off (126[mm/s]/Plain)_1[ms/step]
+/-100ms Adjustment possible as 0 = 321.
742-211 CW->CCW Switch Timing (63[mm/s]/ -87 -200 200 Adjusts the timing of when the Invert Motor forward rotation should stop for the purpose of paper inver- O O
Heavyweight1)(IT3) sion after the paper transport Exit Sensor 1 Off (126[mm/s]/Heavyweight1)_1[ms/step]
+/-200ms Adjustment possible as 0 = 672.
742-212 CW->CCW Switch Timing (126[mm/s]/ -53 -100 100 Adjusts the timing of when the Invert Motor forward rotation should stop for the purpose of paper inver- O O
Heavyweight1)(IT3) sion after the paper transport Exit Sensor 1 Off (126[mm/s]/Heavyweight1)_1[ms/step]
+/-100ms Adjustment possible as 0 = 321.
742-213 CCW->CW Switch Timing (Case 1) 0 -100 100 Adjusts the timing of when the Invert Motor reverse rotation should stop for the purpose of paper inver- O O
(126[mm/s]/Plain)(IT1) sion after the Side2 Regi Start (126[mm/s]/Plain)_1[ms/step]
+/-100ms Adjustment possible as 0 = 242.
742-214 CCW->CW Switch Timing (Case 1) 0 -200 200 Adjusts the timing of when the Invert Motor reverse rotation should stop for the purpose of paper inver- O O
(63[mm/s]/Heavyweight1)(IT1) sion after the Side2 Regi Start (63[mm/s]/Heavyweight1)_1[ms/step]
+/-200ms Adjustment possible as 0 = 681.
742-215 CCW->CW Switch Timing (Case 1) 0 -100 100 Adjusts the timing of when the Invert Motor reverse rotation should stop for the purpose of paper inver- O O
(126[mm/s]/Heavyweight1)(IT1) sion after the Side2 Regi Start (126[mm/s]/Heavyweight1)_1[ms/step]
+/-100ms Adjustment possible as 0 = 242.
742-216 CCW->CW Switch Timing (Case 2) 0 -100 100 Adjusts the timing of when the Invert Motor reverse rotation should stop for the purpose of paper inver- O O
(126[mm/s]/Plain)(IT1) sion after the Side2 Exit Snr ON (126[mm/s]/Plain)_1[ms/step]
+/-100ms Adjustment possible as 0 = 242.
742-217 CCW->CW Switch Timing (Case 2) 0 -200 200 Adjusts the timing of when the Invert Motor reverse rotation should stop for the purpose of paper inver- O O
(63[mm/s]/Heavyweight1)(IT1) sion after the Side2 Exit Snr ON (63[mm/s]/Heavyweight1)_1[ms/step]
+/-200ms Adjustment possible as 0 = 681.
742-218 CCW->CW Switch Timing (Case 2) 0 -100 100 Adjusts the timing of when the Invert Motor reverse rotation should stop for the purpose of paper inver- O O
(126[mm/s]/Heavyweight1)(IT1) sion after the Side2 Exit Snr ON (126[mm/s]/Heavyweight1)_1[ms/step]
+/-100ms Adjustment possible as 0 = 242.

Version 1.1 05/2014 6.3.6 NVM 742_Paper Handling List

6-51
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-52 6.3.6 NVM 742_Paper Handling List
Table 1 NVM 742_Paper Handling List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Protected initialized
742-219 Duplex Transport Operation Start Tim- 0 0 100 Duplex Clutch ON Timing at invert intake (126[mm/s]/Plain) O O
ing (126[mm/s]/Plain) Adjusts by 1[ms/step].
742-220 Duplex Transport Operation Start Tim- 0 0 200 Duplex Clutch ON Timing at invert intake (63[mm/s]/Heavyweight1) O O
ing (63[mm/s]/Heavyweight1) Adjusts by 1[ms/step].
742-221 Duplex Transport Operation Start Tim- 0 0 100 Duplex Clutch ON Timing at invert intake (126[mm/s]/Heavyweight1) O O
ing (126[mm/s]/Heavyweight1) Adjusts by 1[ms/step].
742-222 Duplex Transport Operation Pause 0 -100 100 The Duplex Clutch OFF Timing for temporary stoppage at Duplex Path O O
Timing (2-sheet feed/126[mm/s]/Plain)_1[ms/step] Adjustment
(2-sheet feed/126[mm/s]/Plain)(DT1) *Adjusting the value in the plus (+) direction delays the Duplex Clutch OFF timing.
+/-100ms Adjustment possible as 0 = 2206.
742-223 Duplex Transport Operation Pause 0 -200 200 The Duplex Clutch OFF Timing for temporary stoppage at Duplex Path O O
Timing (2-sheet feed/63[mm/s]/Heavyweight1)_1[ms/step]Adjustment
(2-sheet feed/63[mm/s]/ *Adjusting the value in the plus (+) direction delays the Duplex Clutch OFF timing.
Heavyweight1)(DT1) +/-200ms Adjustment possible as 0 = 4377.
742-224 Duplex Transport Operation Pause 0 -100 100 The Duplex Clutch OFF Timing for temporary stoppage at Duplex Path O O
Timing (2-sheet feed/126[mm/s]/Heavyweight1)_1[ms/step]Adjustment
(2-sheet feed/126[mm/s]/ *Adjusting the value in the plus (+) direction delays the Duplex Clutch OFF timing.
Heavyweight1)(DT1) +/-100ms Adjustment possible as 0 = 2206.
742-225 Duplex Feed Operation Start Timing 0 -100 100 Duplex Clutch ON timing after the temporary stoppage at Duplex Path O O
(2-sheet feed/126[mm/s]/Plain)(DT2) (2-sheet feed/126[mm/s]/Plain)_1[ms/step] Adjustment
*Adjusting the value in the plus (+) direction delays the Duplex Clutch OFF timing.
+/-100ms Adjustment possible as 0 = -870.
742-226 Duplex Feed Operation Start Timing 0 -200 200 Duplex Clutch ON timing after the temporary stoppage at Duplex Path O O
(2-sheet feed/63[mm/s]/ (2-sheet feed/63[mm/s]/Heavyweight1)_1[ms/step]Adjustment
Heavyweight1)(DT2) *Adjusting the value in the plus (+) direction delays the Duplex Clutch OFF timing.
+/-200ms Adjustment possible as 0 = -1807.
742-227 Duplex Feed Operation Start Timing 0 -100 100 Duplex Clutch ON timing after the temporary stoppage at Duplex Path O O
(2-sheet feed/126[mm/s]/ (2-sheet feed/126[mm/s]/Heavyweight1)_1[ms/step]Adjustment
Heavyweight1)(DT2) *Adjusting the value in the plus (+) direction delays the Duplex Clutch OFF timing.
+/-100ms Adjustment possible as 0 = -870.
742-232 MSI Jam Clear Assist Control Feed 0 -50 50 Adjusts the cause paper transport duration when Regi Sensor On Jam generates (63[mm/s])_10[ms/ O O
Time (63[mm/s]) step]
*Adjusting the value in the plus (+) direction makes the duration longer.
742-233 MSI Jam Clear Assist Control Feed 0 -50 50 Adjusts the cause paper transport duration when Regi Sensor On Jam generates (126[mm/s])_10[ms/ O O
Time (126[mm/s]) step]
*Adjusting the value in the plus (+) direction makes the duration longer.
742-234 Sub Motor Speed Fine Adjustment 24711 16000 26000 Adjusts the Sub Motor Regi Transport Speed. (Plain/126 Speed/Tray1) [Division Ratio] O O
(Plain/126 Speed/Tray1)
742-235 Sub Motor Speed Fine Adjustment 24711 16000 26000 Adjusts the Sub Motor Regi Transport Speed. (Plain/126 Speed/MSI) [Division Ratio] O O
(Plain/126 Speed/MSI)
742-236 Sub Motor Speed Fine Adjustment 24932 16000 26000 Adjusts the Sub Motor Regi Transport Speed. (Plain/126 Speed/Tray2) [Division Ratio] O O
(Plain/126 Speed/Tray2)
 Table 1 NVM 742_Paper Handling List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Protected initialized
742-237 Sub Motor Speed Fine Adjustment 24858 16000 26000 Adjusts the Sub Motor Regi Transport Speed. (Heavyweight1/126 Speed/MSI) [Division Ratio] O O
(Heavyweight1/126 Speed/MSI)
742-238 Sub Motor Speed Fine Adjustment 24858 16000 26000 Adjusts the Sub Motor Regi Transport Speed. (Heavyweight1/126 Speed/Tray2) [Division Ratio] O O
(Heavyweight1/126 Speed/Tray2)
742-239 Sub Motor Speed Fine Adjustment 24858 16000 26000 Adjusts the Sub Motor Regi Transport Speed. (Labels1/126 Speed/MSI) [Division Ratio] O O
(Labels1/126 Speed/MSI)
742-240 Sub Motor Speed Fine Adjustment 24858 16000 26000 Adjusts the Sub Motor Regi Transport Speed. (Labels1/126 Speed/Tray2) [Division Ratio] O O
(Labels1/126 Speed/Tray2)
742-241 Sub Motor Speed Fine Adjustment 24858 16000 26000 Adjusts the Sub Motor Regi Transport Speed. (Gloss1/126 Speed/MSI) [Division Ratio] O O
(Gloss1/126 Speed/MSI)
742-242 Sub Motor Speed Fine Adjustment 24858 16000 26000 Adjusts the Sub Motor Regi Transport Speed. (Gloss1/126 Speed/Tray2) [Division Ratio] O O
(Gloss1/126 Speed/Tray2)
742-243 Sub Motor Speed Fine Adjustment 49715 40000 50000 Adjusts the Sub Motor Regi Transport Speed. (Heavyweight1/63 Speed/MSI) [Division Ratio] O O
(Heavyweight1/63 Speed/MSI)
742-244 Sub Motor Speed Fine Adjustment 49715 40000 50000 Adjusts the Sub Motor Regi Transport Speed. (Heavyweight1/63 Speed/Tray2) [Division Ratio] O O
(Heavyweight1/63 Speed/Tray2)
742-245 Sub Motor Speed Fine Adjustment 49814 40000 50000 Adjusts the Sub Motor Regi Transport Speed. (Extra Heavyweight/63 Speed/MSI) [Division Ratio] O O
(Extra Heavyweight/63 Speed/MSI)
742-246 Sub Motor Speed Fine Adjustment 49814 40000 50000 Adjusts the Sub Motor Regi Transport Speed. (Extra Heavyweight/63 Speed/Tray2) [Division Ratio] O O
(Extra Heavyweight/63 Speed/Tray2)
742-247 Sub Motor Speed Fine Adjustment 49715 40000 50000 Adjusts the Sub Motor Regi Transport Speed. (Labels1/63 Speed/MSI) [Division Ratio] O O
(Labels1/63 Speed/MSI)
742-248 Sub Motor Speed Fine Adjustment 49715 40000 50000 Adjusts the Sub Motor Regi Transport Speed. (Labels1/63 Speed/Tray2) [Division Ratio] O O
(Labels1/63 Speed/Tray2)
742-249 Sub Motor Speed Fine Adjustment 49814 40000 50000 Adjusts the Sub Motor Regi Transport Speed. (Labels2/63 Speed/MSI) [Division Ratio] O O
(Labels2/63 Speed/MSI)
742-250 Sub Motor Speed Fine Adjustment 49814 40000 50000 Adjusts the Sub Motor Regi Transport Speed. (Labels2/63 Speed/Tray2) [Division Ratio] O O
(Labels2/63 Speed/Tray2)
742-251 Sub Motor Speed Fine Adjustment 49715 40000 50000 Adjusts the Sub Motor Regi Transport Speed. (Gloss1/63 Speed/MSI) [Division Ratio] O O
(Gloss1/63 Speed/MSI)
742-252 Sub Motor Speed Fine Adjustment 49715 40000 50000 Adjusts the Sub Motor Regi Transport Speed. (Gloss1/63 Speed/Tray2) [Division Ratio] O O
(Gloss1/63 Speed/Tray2)
742-253 Sub Motor Speed Fine Adjustment 49715 40000 50000 Adjusts the Sub Motor Regi Transport Speed. (Gloss2/63 Speed/MSI) [Division Ratio] O O
(Gloss2/63 Speed/MSI)
742-254 Sub Motor Speed Fine Adjustment 49715 40000 50000 Adjusts the Sub Motor Regi Transport Speed. (Gloss2/63 Speed/Tray2) [Division Ratio] O O
(Gloss2/63 Speed/Tray2)

Version 1.1 05/2014 6.3.6 NVM 742_Paper Handling List

6-53
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-54 6.3.6 NVM 742_Paper Handling List
6.3.7 NVM 744_Fusing Unit List
Table 1 NVM 744_Fusing Unit List
Write
Default Minimum Maximu Allowed/ Can be
Chain-Link NVM Name Value value m value Description Unit Protected initialized
744-001 B/W Plain S Setting Temperature 5 0 5 Control Table No. - O O
0: 1-1, 1: 1-2, 2: 1-3, 3: 2-1, 4: 2-2, 5: 2-3
744-002 B/W Heavyweight S Setting Temperature 1 0 2 Control Table No. - O O
0: 3-1: Heavyweight (Setting Temperature: L)
1: 3-2: Heavyweight (Standard)
2: 3-3: Heavyweight (Setting Temperature: H)
744-003 B/W Extra Heavyweight S Setting Temperature 2 0 2 Control Table No. - O O
0: 4-1, 1: 4-2, 2: 4-3
744-004 F/C Plain S Setting Temperature 5 0 5 Control Table No. - O O
0: 6-1, 1: 6-2, 2: 6-3, 3: 7-1, 4: 7-2, 5: 7-3
744-005 F/C Heavyweight S Setting Temperature 1 0 5 Control Table No. - O O
0: 8-1: Heavyweight1 (Setting Temperature: L)
1: 8-2: Heavyweight (Standard)
2: 8-3: Heavyweight1 (Setting Temperature: H)
3: 6-1: Plain1 (Setting Temperature: L)
4: 6-2: Plain1 (Standard)
5: 6-3: Plain1 (Setting Temperature: H)
744-006 F/C Extra Heavyweight S Setting Temperature 2 0 2 Control Table No. - O O
0: 9-1, 1: 9-2, 2: 9-3
744-007 Fusing Failure Individual Support Mode 12 0 15 Set the bit to "1" for the paper type on which to perform the individual support - O O
mode.
Bit0: Plain 1
Bit1: Plain 2
Bit2: Heavyweight
Bit3: Extra Heavyweight
Bit4~7: Not used
744-012 Fusing Motor Speed Fine Adjustment -140 -300 300 NVM for Fusing Motor Speed Fine Adjustment. Adjust by setting the division ratio. - O O
(126[mm/s]/Plain 1 = Plain AFG) (126[mm/s]/Plain1) (-0.6%)
744-013 Fusing Motor Speed Fine Adjustment -140 -300 300 NVM for Fusing Motor Speed Fine Adjustment. Adjust by setting the division ratio. - O O
(126[mm/s]/Plain 2 = Plain DEFG) (126[mm/s]/Plain2) (-0.6%)
744-014 Fusing Motor Speed Fine Adjustment -232 -300 300 NVM for Fusing Motor Speed Fine Adjustment. Adjust by setting the division ratio. - O O
(126[mm/s]/Plain S) (126[mm/s]/PlainS) (-0.2%)
744-015 Fusing Motor Speed Fine Adjustment -186 -300 300 NVM for Fusing Motor Speed Fine Adjustment. Adjust by setting the division ratio. - O O
(126[mm/s]/Heavyweight, Labels/BW) (126[mm/s]/Heavyweight/BW) (-0.4%)
744-016 Fusing Motor Speed Fine Adjustment -232 -300 300 NVM for Fusing Motor Speed Fine Adjustment. Adjust by setting the division ratio. - O O
(126[mm/s]/Gloss/BW) (126[mm/s]/Gloss/BW) (-0.2%)
744-017 Fusing Motor Speed Fine Adjustment -373 -600 600 NVM for Fusing Motor Speed Fine Adjustment. Adjust by setting the division ratio. - O O
(63[mm/s]/Heavyweight, Labels/FC) (63[mm/s]/Heavyweight/FC) (-0.4%)
744-018 Fusing Motor Speed Fine Adjustment -465 -600 600 NVM for Fusing Motor Speed Fine Adjustment. Adjust by setting the division ratio. - O O
(63[mm/s]/Gloss/FC) (63[mm/s]/Gloss/FC) (-0.2%)

Version 1.1 05/2014 6.3.7 NVM 744_Fusing Unit List

6-55
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-56 6.3.7 NVM 744_Fusing Unit List
Table 1 NVM 744_Fusing Unit List
Write
Default Minimum Maximu Allowed/ Can be
Chain-Link NVM Name Value value m value Description Unit Protected initialized
744-019 Fusing Motor Speed Fine Adjustment -465 -600 600 NVM for Fusing Motor Speed Fine Adjustment. Adjust by setting the division ratio. - O O
(63[mm/s]/Heavyweight2,Labels2,Envelope) (63[mm/s]/Extra Heavyweight) (-0.2%)
744-020 Fusing Motor Speed Fine Adjustment -465 -600 600 NVM for Fusing Motor Speed Fine Adjustment. Adjust by setting the division ratio. - O O
(63[mm/s]/HW Gloss) (63[mm/s]/HW Gloss) (-0.2%)
744-021 Fusing Failure Individual Support Mode Shift Tem- 5 0 20 The shift temperature for run temperature 1 O O
perature Plain 1 1 count = 1 [Degree] [degree]
744-022 Fusing Failure Individual Support Mode Shift Tem- 5 0 20 The shift temperature for run temperature 1 O O
perature Plain 2 1 count = 1 [Degree] [degree]
744-023 Fusing Failure Individual Support Mode Shift Tem- 5 0 20 The shift temperature for run temperature 1 O O
perature - Heavyweight 1 count = 1 [Degree] [degree]
744-024 Fusing Failure Individual Support Mode Shift Tem- 5 0 20 The shift temperature for run temperature 1 O O
perature - Extra Heavyweight 1 count = 1 [Degree] [degree]
744-025 Toner Blocking Countermeasure Applied Paper 0 0 255 Specify the combined bits for the paper types to apply the countermeasure. - O O
Type (Plain) 0: Do not apply, 1: PlainA, 2: PlainB, 4: PlainC, 8: PlainD, 16: PlainE, 32: PlainF,
64: PlainG, 128: Plain S
744-026 Toner Blocking Countermeasure Applied Paper 0 0 63 Specify the combined bits for the paper types to apply the countermeasure. - O O
Type (Heavyweight BW) 0: Do not apply, 1: Heavyweight1A (BW), 2: Heavyweight1B (BW), 4: Heavyweight
C (BW)
8: Heavyweight1S (BW), 16: Gloss1 (BW), 32: Labels (BW)
744-027 Toner Blocking Countermeasure Applied Paper 0 0 63 Specify the combined bits for the paper types to apply the countermeasure. - O O
Type (Heavyweight FC) 0: Do not apply, 1: Heavyweight1A (FC), 2: Heavyweight1B (FC), 4: Heavyweight
C (FC)
8: Heavyweight1S (FC), 16: Gloss1 (FC), 32: Labels (FC)
744-028 Toner Blocking Countermeasure Applied Paper 0 0 127 Specify the combined bits for the paper types to apply the countermeasure. - O O
Type (Extra Heavyweight) 0: Do not apply, 1: Heavyweight2A (Include envelopes), 2: Extra Heavyweight B, 4:
Extra Heavyweight C,
8: Extra Heavyweight D, 16: Extra Heavyweight S, 32: HW Gloss, 64: Heavyweight
Labels
744-029 Toner Blocking Countermeasure Interval Adjust- 0 0 50000 Interval adjustment value 1 [ms] O O
ment Value 1count=1[ms]
(126mm/s)
744-030 Toner Blocking Countermeasure Interval Adjust- 0 0 100000 Interval adjustment value 1 [ms] O O
ment Value 1count=1[ms]
(63mm/s)
744-031 HFSI Warning Threshold Value 400000 0 1200000 Notifies the time for Fusing Unit replacement - O O
Warning Value = HFSI Threshold Value - HFSI Warning Threshold Value
6.3.8 NVM 746_Xfer 1 List
Table 1 NVM 746_Xfer 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
746-001 Primary Transfer Output Control SW 2 0 2 Control Switch of the Primary Transfer Output - O O
0: Fixed Output, 1: Environment Control, 2: Vh Interlocking Con-
trol
746-002 Primary Transfer Output Fixed Output (63 Speed/BW Mode) 50 0 800 Output value when Primary Transfer Output Control is not exe- 0.1[A] O O
cuted
746-003 Primary Transfer Output Fixed Output (63 Speed/FC Mode) 200 0 800 Output value when Primary Transfer Output Control is not exe- 0.1[A] O O
cuted
746-004 Primary Transfer Output Fixed Output (126 Speed/BW Mode) 100 0 800 Output value when Primary Transfer Output Control is not exe- 0.1[A] O O
cuted
746-005 Primary Transfer Output Fixed Output (126 Speed/FC Mode) 400 0 800 Output value when Primary Transfer Output Control is not exe- 0.1[A] O O
cuted
746-006 Primary Transfer Output Heat Haze/Mock Heat Haze Correction 9 1 10 The run environment threshold value for Primary Transfer Output - O O
Run Environment Heat Haze/Mock Heat Haze Correction
746-007 Primary Transfer Output Heat Haze/Mock Heat Haze Area Cov- 1 0 10 Primary Transfer Output Heat Haze Area Coverage Threshold 1[%] O O
erage Threshold Value Value
746-008 Primary Transfer Output Heat Haze/Mock Heat Haze Correction 135 0 255 Primary Transfer Output Heat Haze/Mock Heat Haze Correction 1[%] O O
Coefficient (63mm/s) Coefficient
746-009 Primary Transfer Output Heat Haze/Mock Heat Haze Correction 135 0 255 Primary Transfer Output Heat Haze/Mock Heat Haze Correction 1[%] O O
Coefficient (126mm/s) Coefficient
746-010 Resistance Detection Execution SW 1 0 1 Resistance Detection Execution Switch SW - O O
0: Do not perform, 1: Perform
746-011 Secondary Transfer Fixed Output_Side 1 (When Resistance 200 0 600 The transfer bias output value when Resistance Detection is not 10[V] O O
Detection Not Performed) performed
746-012 Secondary Transfer Fixed Output_Side 2 (When Resistance 200 0 600 The transfer bias output value when Resistance Detection is not 10[V] O O
Detection Not Performed) performed
746-013 Secondary Transfer Resistance Detection Output (For Other than 100 0 600 The resistance detection bias output value (for other than Environ- 10[V] O O
Environment No. 9) ment No. 9)
746-014 Secondary Transfer Resistance Detection Output (For Environ- 200 0 600 The resistance detection bias output value (for Environment No. 10[V] O O
ment No. 9) 9)
746-015 Secondary Transfer Output Group Correction Coefficient (For 100 0 255 Secondary Transfer Output Group Correction Coefficient (For 1[%] O O
Side 1) Side 1)
746-016 Secondary Transfer Output Group Correction Coefficient (For 100 0 255 Secondary Transfer Output Group Correction Coefficient (For 1[%] O O
Side 2) Side 2)
746-017 IBT Cleaner Initial Toner Band Density 100 0 100 IBT Cleaner Initial Toner Band Density 1[%] O O
746-018 IBT Cleaner Initial Toner Band Length in Process Direction 10 0 10 IBT Cleaner Initial Toner Band Length in Process Direction 1[mm] O O
746-019 IBT CLN Ban Process Direction Length 4 0 4 IBT Cleaner Curling Prevention Band Length in Process Direction 1[mm] O O
746-020 IBT CLN Band Concentration 60 0 100 IBT Cleaner Curling Prevention Band Density 1[%] O O
746-021 Heat Haze/Mock Heat Haze Prevention K Band Length in Pro- 80 0 100 Heat Haze/Mock Heat Haze Prevention K Band Length in Process 1[mm] O O
cess Direction Direction

Version 1.1 05/2014 6.3.8 NVM 746_Xfer 1 List

6-57
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-58 6.3.8 NVM 746_Xfer 1 List
Table 1 NVM 746_Xfer 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
746-022 Heat Haze/Mock Heat Haze Prevention K Band Density 100 0 100 Heat Haze/Mock Heat Haze Prevention K Band Density 1[%] O O
746-023 Heat Haze/Mock Heat Haze Prevention K Band Run Environment 9 1 10 Heat Haze/Mock Heat Haze Prevention K Band Run Environment - O O
No. Threshold Value No. Threshold Value
746-024 Heat Haze/Mock Heat Haze Prevention K Band Area Coverage 1 0 10 Heat Haze/Mock Heat Haze Prevention K Band Area Coverage 1[%] O O
Threshold Value Threshold Value
746-025 Heat Haze/Mock Heat Haze Prevention K Band Stop Time 0 0 255 Heat Haze/Mock Heat Haze Prevention K Band Stop Time 1[Hr] O O
Threshold Value Threshold Value
746-026 Non Paper Pass Section Density Fluctuation Countermeasure 0 0 1 Non Paper Pass Section Density Fluctuation Countermeasure - O O
Band SW Band SW
0: Do not perform, 1: Perform
746-027 Non Paper Pass Section Density Fluctuation Countermeasure 1000 0 5000 Non Paper Pass Section Density Fluctuation Countermeasure 1[PV] O O
Band Execution PV Threshold Value for End Set Up Band Execution PV Threshold Value for End Set Up
746-028 Non Paper Pass Section Density Fluctuation Countermeasure 100 0 500 Non Paper Pass Section Density Fluctuation Countermeasure 1[PV] O O
Band Execution Addition PV Threshold Value for Mid Set Up Band Execution Addition PV Threshold Value for Mid Set Up
746-029 Non Paper Pass Section Density Fluctuation Countermeasure 70 0 100 Non Paper Pass Section Density Fluctuation Countermeasure 1[%] O O
Band K Color Density Band K Color Density
746-030 Bleed Recovery Mode Execution SW 0 0 1 Bleed Recovery Mode Execution SW - O O
0: Do not perform, 1: Perform
746-031 Bleed Recovery Mode Temperature Threshold Value 250 -85 32767 Bleed Recovery Mode Temperature Threshold Value 0.1 O O
[degree]
746-032 Bleed Recovery Mode Humidity Threshold Value 700 0 65535 Bleed Recovery Mode Humidity Threshold Value 0.1[%RH] O O
746-033 Bleed Recovery Mode Resting Time Threshold Value 1440 0 3000 Bleed Recovery Mode Resting Time Threshold Value 1[min] O O
746-034 Bleed Recovery Mode Execution Length 9540 0 30160 Bleed Recovery Mode Execution Length 1[mm] O O
746-035 IBT Reverse Rotation Execution SW 1 0 2 IBT Reverse Rotation Execution SW - O O
0: Do not perform, 1: Execute with Job End, 2: Split Job and exe-
cute
746-036 IBT reverse Rotation PV Threshold Value (Job End) 7000 0 100000 IBT reverse Rotation PV Threshold Value (Job End) 0.01[PV] O O
746-037 IBT Reverse Rotation PV Threshold Value (Job Split) 7000 0 100000 IBT Reverse Rotation PV Threshold Value (Job Split) 0.01[PV] O O
746-038 IBT Reverse Rotation Environment No. Threshold Value 7 1 10 IBT Reverse Rotation Environment No. Threshold Value - O O
746-039 Smear Measures Execution SW 0 0 1 Smear Measures Execution SW - O O
0: Do not perform, 1: Perform
746-045 Secondary Transfer Output (During Diag) 100 0 600 Secondary Transfer Output Value during Diag 10[V] O O
746-048 TES Final Stage Output Duty (Normal Type/Environment No.1-3) 100 0 100 TES Final Stage Output Duty (Normal Type/Environment No.1-3) % O O
746-049 TES Final Stage Output Duty (Normal Type/Environment No.4-7) 100 0 100 TES Final Stage Output Duty (Normal Type/Environment No.4-7) % O O
746-050 TES Final Stage Output Duty (Normal Type/Environment No.8-9) 100 0 100 TES Final Stage Output Duty (Normal Type/Environment No.8-9) % O O
746-051 TES Final Stage Output Duty (Heavyweight 1 Type/Environment 100 0 100 TES Final Stage Output Duty (Heavyweight 1 Type/Environment % O O
No.1-3) No.1-3)
746-052 TES Final Stage Output Duty (Heavyweight 1 Type/Environment 100 0 100 TES Final Stage Output Duty (Heavyweight 1 Type/Environment % O O
No.4-7) No.4-7)
746-053 TES Final Stage Output Duty (Heavyweight 1 Type/Environment 100 0 100 TES Final Stage Output Duty (Heavyweight 1 Type/Environment % O O
No.8-9) No.8-9)
 Table 1 NVM 746_Xfer 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
746-054 TES Final Stage Output Duty (Heavyweight 2 Type/Environment 100 0 100 TES Final Stage Output Duty (Heavyweight 2 Type/Environment % O O
No.1-3) No.1-3)
746-055 TES Final Stage Output Duty (Heavyweight 2 Type/Environment 100 0 100 TES Final Stage Output Duty (Heavyweight 2 Type/Environment % O O
No.4-7) No.4-7)
746-056 TES Final Stage Output Duty (Heavyweight 2 Type/Environment 100 0 100 TES Final Stage Output Duty (Heavyweight 2 Type/Environment % O O
No.8-9) No.8-9)
746-057 TES Final Stage Output Duty (Gloss1 Type/Environment No.1-3) 100 0 100 TES Final Stage Output Duty (Gloss1 Type/Environment No.1-3) % O O
746-058 TES Final Stage Output Duty (Gloss1 Type/Environment No.4-7) 100 0 100 TES Final Stage Output Duty (Gloss1 Type/Environment No.4-7) % O O
746-059 TES Final Stage Output Duty (Gloss1 Type/Environment No.8-9) 100 0 100 TES Final Stage Output Duty (Gloss1 Type/Environment No.8-9) % O O
746-060 TES Final Stage Output Duty (Gloss2 Type/Environment No.1-3) 100 0 100 TES Final Stage Output Duty (Gloss2 Type/Environment No.1-3) % O O
746-061 TES Final Stage Output Duty (Gloss2 Type/Environment No.4-7) 100 0 100 TES Final Stage Output Duty (Gloss2 Type/Environment No.4-7) % O O
746-062 TES Final Stage Output Duty (Gloss2 Type/Environment No.8-9) 100 0 100 TES Final Stage Output Duty (Gloss2 Type/Environment No.8-9) % O O
746-065 Secondary Transfer Cleaning Forward Bias Applied Cycle Count 1 0 5 Secondary Transfer Cleaning Forward Bias Applied Cycle Count 1[Spin] O O
746-066 Secondary Transfer Cleaning Reverse Bias Applied Cycle Count 1 0 5 Secondary Transfer Cleaning Reverse Bias Applied Cycle Count 1[Spin] O O
746-067 Secondary Transfer Cleaning Cycle Repetition Count (After Pro- 4 1 20 Secondary Transfer Cleaning Cycle Repetition Count (After Pro- 1 [times] O O
Con) Con)
746-068 Secondary Transfer Cleaning Cycle Repetition Count (After Regi- 4 1 20 Secondary Transfer Cleaning Cycle Repetition Count (After Regi- 1 [times] O O
Con) Con)
746-069 Secondary Transfer Cleaning Cycle Repetition Count 4 1 20 Secondary Transfer Cleaning Cycle Repetition Count 1 [times] O O
(When creating Toner Band) (When creating Toner Band)
746-070 Secondary Transfer Cleaning Cycle Repetition Count 12 1 20 Secondary Transfer Cleaning Cycle Repetition Count 1 [times] O O
(During Jam Recovery/MSI Standard Size Detection, etc.) (During Jam Recovery/MSI Standard Size Detection, etc.)
746-071 Secondary Transfer Cleaning Cycle Repetition Count (After TC 4 1 20 Secondary Transfer Cleaning Cycle Repetition Count (TC Setup) 1 [times] O O
Setup)
746-072 Secondary Transfer Output Offset Increment Width 10 0 50 Secondary Transfer Output Offset Increment Width (per 1 Step) 1[%] O O
746-073 Primary Transfer Output Offset Increment Width 5 0 10 Primary Transfer Output Offset Increment Width in the Primary 1[%] O X
Transfer Voltage Offset Adjustment Function
746-075 Secondary Transfer Cleaning Reverse Bias Output Value (Diag) 140 0 140 Secondary Transfer Cleaning Reverse Bias Output Value 10[V] O O
746-078 Hard Stop SW during IBT Unit Dead End 0 0 1 Hard Stop SW during IBT Unit Dead End - O X
0: Do not perform, 1: Perform
746-079 Hard Stop SW during 2nd BTR Unit Dead End 0 0 1 Hard Stop SW during 2nd BTR Unit Dead End - O X
0: Do not perform, 1: Perform

Version 1.1 05/2014 6.3.8 NVM 746_Xfer 1 List

6-59
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-60 6.3.8 NVM 746_Xfer 1 List
6.3.9 NVM 747_Xfer 2 List
Table 1 NVM 747_Xfer 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
747-001 Selected Primary Transfer Normal Output Value Storage 0 0 800 Stores the Primary Transfer Standard Output Value selected from 0.1[A] O O
(63 Speed/BW Mode) the Environment No. when Primary Transfer Output Control is per-
formed
747-002 Selected Primary Transfer Normal Output Value Storage 0 0 800 Stores the Primary Transfer Standard Output Value selected from 0.1[A] O O
(63 Speed/FC Mode) the Environment No. when Primary Transfer Output Control is per-
formed
747-003 Selected Primary Transfer Normal Output Value Storage 0 0 800 Stores the Primary Transfer Standard Output Value selected from 0.1[A] O O
(126 Speed/BW Mode) the Environment No. when Primary Transfer Output Control is per-
formed
747-004 Selected Primary Transfer Normal Output Value Storage 0 0 800 Stores the Primary Transfer Standard Output Value selected from 0.1[A] O O
(126 Speed/FC Mode) the Environment No. when Primary Transfer Output Control is per-
formed
747-005 Primary Transfer Final Output (63 Speed/BW Mode) 0 0 800 Stores the Primary Transfer Final Output Value when Primary 0.1[A] O O
Transfer Output Control is performed
747-006 Primary Transfer Final Output (63 Speed/FC Mode) 0 0 800 Stores the Primary Transfer Final Output Value when Primary 0.1[A] O O
Transfer Output Control is performed
747-007 Primary Transfer Final Output (126 Speed/BW Mode) 0 0 800 Stores the Primary Transfer Final Output Value when Primary 0.1[A] O O
Transfer Output Control is performed
747-008 Primary Transfer Final Output (126 Speed/FC Mode) 0 0 800 Stores the Primary Transfer Final Output Value when Primary 0.1[A] O O
Transfer Output Control is performed
747-009 Primary Transfer Final Output Digital Value (63 Speed/BW 0 0 255 Stores the Primary Transfer Final Output Value when Primary - O O
Mode) Transfer Output Control is performed
<Digital Value> (63 Speed/BW Mode)
747-010 Primary Transfer Final Output Digital Value (63 Speed/FC 0 0 255 Stores the Primary Transfer Final Output Value when Primary - O O
Mode) Transfer Output Control is performed
<Digital Value> (63 Speed/FC Mode)
747-011 Primary Transfer Final Output Digital Value (126 Speed/BW 0 0 255 Stores the Primary Transfer Final Output Value when Primary - O O
Mode) Transfer Output Control is performed
<Digital Value> (126 Speed/BW Mode)
747-012 Primary Transfer Final Output Digital Value (126 Speed/ 0 0 255 Stores the Primary Transfer Final Output Value when Primary - O O
FCW Mode) Transfer Output Control is performed
<Digital Value> (126 Speed/FC Mode)
747-013 Secondary Transfer Resistance Detection I Monitor Result 0 0 4000 Stores the I Monitor Result (average value calculation result) when 0.1[A] O O
(Average Value Calculation Result) Resistance Detection is performed
747-014 Secondary Transfer System Resistance Calculation Result 0 0 1000 Secondary Transfer System Resistance Calculation Result when 1[MO] O O
Resistance Detection is performed
747-015 Selected Secondary Transfer Slant Coefficient: An (Side1) 0 0 255 Selected Secondary Transfer Slant Coefficient: An (Side1) [X1] - O O
747-016 Selected Secondary Transfer Slant Coefficient: An (Side2) 0 0 255 Selected Secondary Transfer Slant Coefficient: An (Side2) [X1] - O O
747-017 Selected Secondary Transfer Segment Coefficient: Bn 0 0 6000 Selected Secondary Transfer Segment Coefficient: Bn (Side1) [X1] - O O
(Side1)

Version 1.1 05/2014 6.3.9 NVM 747_Xfer 2 List

6-61
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-62 6.3.9 NVM 747_Xfer 2 List
Table 1 NVM 747_Xfer 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
747-018 Selected Secondary Transfer Segment Coefficient: Bn 0 0 6000 Selected Secondary Transfer Segment Coefficient: Bn (Side2) [X1] - O O
(Side2)
747-019 Selected Secondary Transfer Correction Coefficient: Pn 0 0 255 Selected Secondary Transfer Correction Coefficient: Pn (Side 1) 1[%] O O
(Side 1)
747-020 Selected Secondary Transfer Correction Coefficient: Pn 0 0 255 Selected Secondary Transfer Correction Coefficient: Pn (Side 2) 1[%] O O
(Side 2)
747-021 Secondary Transfer Reference Output (Side 1) 0 0 100000 Secondary Transfer Reference Output (Side 1) 10[V] O O
747-022 Secondary Transfer Reference Output (Side 2) 0 0 100000 Secondary Transfer Reference Output (Side 2) 10[V] O O
747-023 Secondary Transfer Final Output (Side 1) 0 0 600 Secondary Transfer Final Output (Side 1) 10[V] O O
747-024 Secondary Transfer Final Output (Side 2) 0 0 600 Secondary Transfer Final Output (Side 2) 10[V] O O
747-025 Secondary Transfer Final Output Digital Value (Side1) 0 0 255 Secondary Transfer Final Output Digital Value (Side1) - O O
747-026 Secondary Transfer Final Output Digital Value (Side2) 0 0 255 Secondary Transfer Final Output Digital Value (Side2) - O O
747-027 Non Paper Pass Section Density Fluctuation Countermea- 0 0 6000 Non Paper Pass Section Density Fluctuation Countermeasure 1 [PV] O O
sure Band Accumulated PV Counter Band Accumulated PV Counter
747-028 Bleed Recovery Mode Time when Main Motor stopped dur- 0 0 4294967295 Save the time when Main Motor stopped during the previous Job - O O
ing the previous Job
747-029 IBT Reverse Rotation PV Counter 0 0 100000 IBT Reverse Rotation PV Counter 0.01 [PV] O O
747-032 Secondary Transfer Resistance Detection I Monitor Result 0 0 4000 Secondary Transfer Resistance Detection I Monitor Result (Point 1) 0.1[A] O O
(Point 1)
747-033 Secondary Transfer Resistance Detection I Monitor Result 0 0 4000 Secondary Transfer Resistance Detection I Monitor Result (Point 2) 0.1[A] O O
(Point 2)
747-034 Secondary Transfer Resistance Detection I Monitor Result 0 0 4000 Secondary Transfer Resistance Detection I Monitor Result (Point 3) 0.1[A] O O
(Point 3)
747-035 Secondary Transfer Resistance Detection I Monitor Result 0 0 4000 Secondary Transfer Resistance Detection I Monitor Result (Point 4) 0.1[A] O O
(Point 4)
747-036 Secondary Transfer Resistance Detection I Monitor Result 0 0 4000 Secondary Transfer Resistance Detection I Monitor Result (Point 5) 0.1[A] O O
(Point 5)
747-037 Secondary Transfer Resistance Detection I Monitor Result 0 0 4000 Secondary Transfer Resistance Detection I Monitor Result (Point 6) 0.1[A] O O
(Point 6)
747-038 Secondary Transfer Resistance Detection I Monitor Result 0 0 4000 Secondary Transfer Resistance Detection I Monitor Result (Point 7) 0.1[A] O O
(Point 7)
747-039 Secondary Transfer Resistance Detection I Monitor Result 0 0 4000 Secondary Transfer Resistance Detection I Monitor Result (Point 8) 0.1[A] O O
(Point 8)
747-040 Secondary Transfer Resistance Detection I Monitor Result 0 0 4000 Secondary Transfer Resistance Detection I Monitor Result (Point 9) 0.1[A] O O
(Point 9)
747-041 Secondary Transfer Resistance Detection I Monitor Result 0 0 4000 Secondary Transfer Resistance Detection I Monitor Result (Point 0.1[A] O O
(Point 10) 10)
747-042 Secondary Transfer Resistance Detection I Monitor Result 0 0 4000 Secondary Transfer Resistance Detection I Monitor Result (Point 0.1[A] O O
(Point 11) 11)
747-043 Secondary Transfer Resistance Detection I Monitor Result 0 0 4000 Secondary Transfer Resistance Detection I Monitor Result (Point 0.1[A] O O
(Point 12) 12)
6.3.10 NVM 749_LPH List
Table 1 NVM 749_LPH List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
749-001 LPH_DL_WAIT 400 0 1023 Download waiting time from LPH ROM to IBY in IBY Initial DL Sequence. 1[ms] O O
749-002 LPH_DL_FAIL_COLOR 0 0 15 Update (overwrite) the value during IBY Initial DL Sequence when No of Initial DL is 3 or - O O
more.
(The (each) color generated from Fail on the 3rd initial DL will be saved. )
bit0: Y, bit1: M, bit2: C, bit3: K
749-003 LPH_DL_FAIL_POWER_COUNT 0 0 511 Count the No. of LPH_DL_FAIL_POWER occurred during IBY Initial Sequence. 1 [times] O O
749-004 LPH_IBY_STATUS_Y 0 0 128 During IBY Initial DL, store the IBY (Y) status register value only when Read is possible. - O O
Return to default value when starting Initial DL Sequence.
If status register is Read multiple times after conducting Initial DL Process again, only
the 3rd value will be stored.
· bit0: CHECKSUM: Check result of Check sum 0=Check sum OK/1=Check sum NG)
· bit1: NO_ACK vs EEPROM ACK Error Flag (0=ack Normal/1=NO ack (ACK does
come back))
· bit2: BLANK_CHK Blank check result (0=BLANK Check OK/1=BLANK Check NG)
· bit3: VIF_ERR_FLAG VIDEOIF Error Flag (Refer to VIDEOIF Specification)(0=OK/
1=NG)
749-005 LPH_IBY_STATUS_M 0 0 128 During IBY Initial DL, store the IBY (M) status register value only when Read is possible. - O O
Return to default value when starting Initial DL Sequence.
If status register is Read multiple times after conducting Initial DL Process again, only
the 3rd value will be stored.
· bit0: CHECKSUM: Check result of Check sum 0=Check sum OK/1=Check sum NG)
· bit1: NO_ACK vs EEPROM ACK Error Flag (0=ack Normal/1=NO ack (ACK does
come back))
· bit2: BLANK_CHK Blank check result (0=BLANK Check OK/1=BLANK Check NG)
· bit3: VIF_ERR_FLAG VIDEOIF Error Flag (Refer to VIDEOIF Specification)(0=OK/
1=NG)
749-006 LPH_IBY_STATUS_C 0 0 128 During IBY Initial DL, store the IBY (C) status register value only when Read is possible. - O O
Return to default value when starting Initial DL Sequence.
If status register is Read multiple times after conducting Initial DL Process again, only
the 3rd value will be stored.
· bit0: CHECKSUM: Check result of Check sum 0=Check sum OK/1=Check sum NG)
· bit1: NO_ACK vs EEPROM ACK Error Flag (0=ack Normal/1=NO ack (ACK does
come back))
· bit2: BLANK_CHK Blank check result (0=BLANK Check OK/1=BLANK Check NG)
· bit3: VIF_ERR_FLAG VIDEOIF Error Flag (Refer to VIDEOIF Specification)(0=OK/
1=NG)

Version 1.1 05/2014 6.3.10 NVM 749_LPH List

6-63
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-64 6.3.10 NVM 749_LPH List
Table 1 NVM 749_LPH List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
749-007 LPH_IBY_STATUS_K 0 0 128 During IBY Initial DL, store the IBY (K) status register value only when Read is possible. - O O
Return to default value when starting Initial DL Sequence.
If status register is Read multiple times after conducting Initial DL Process again, only
the 3rd value will be stored.
· bit0: CHECKSUM: Check result of Check sum 0=Check sum OK/1=Check sum NG)
· bit1: NO_ACK vs EEPROM ACK Error Flag (0=ack Normal/1=NO ack (ACK does
come back))
· bit2: BLANK_CHK Blank check result (0=BLANK Check OK/1=BLANK Check NG)
· bit3: VIF_ERR_FLAG VIDEOIF Error Flag (Refer to VIDEOIF Specification)(0=OK/
1=NG)
749-008 LPH_DL_FAIL_STATUS_Y 0 0 255 Maintain the Fail type generated from Y color. - O O
bit0: LPH Ack Fail, bit1: LPH Read Fail, bit2: LPH DL_Status Fail,
bit3: LPH REG access Fail, bit4: LPH ROM_access Fail, bit5: LPH Write Fail
749-009 LPH_DL_FAIL_STATUS_M 0 0 255 Maintain the Fail type generated in M color. - O O
bit0: LPH Ack Fail, bit1: LPH Read Fail, bit2: LPH DL_Status Fail,
bit3: LPH REG access Fail, bit4: LPH ROM_access Fail, bit5: LPH Write Fail
749-010 LPH_DL_FAIL_STATUS_C 0 0 255 Maintain the Fail type generated in C color. - O O
bit0: LPH Ack Fail, bit1: LPH Read Fail, bit2: LPH DL_Status Fail,
bit3: LPH REG access Fail, bit4: LPH ROM_access Fail, bit5: LPH Write Fail
749-011 LPH_DL_FAIL_STATUS_K 0 0 255 Maintain the Fail type generated in K color. - O O
bit0: LPH Ack Fail, bit1: LPH Read Fail, bit2: LPH DL_Status Fail,
bit3: LPH REG access Fail, bit4: LPH ROM_access Fail, bit5: LPH Write Fail
749-012 LPH_DL_COUNT_Y 0 0 511 Counts the no. of Fail detection of Y color during IBY initial DL. 1 [times] O O
749-013 LPH_DL_COUNT_M 0 0 511 Counts the no. of Fail detection of M color during IBY initial DL. 1 [times] O O
749-014 LPH_DL_COUNT_C 0 0 511 Counts the no. of Fail detection of C color during IBY initial DL. 1 [times] O O
749-015 LPH_DL_COUNT_K 0 0 511 Counts the no. of Fail detection of K color during IBY initial DL. 1 [times] O O
749-016 LPH_SERIAL_NO1_Y 0 0 255 Identification No.1 of Y color LPH - O X
749-017 LPH_SERIAL_NO1_M 0 0 255 Identification No.1 of M color LPH - O X
749-018 LPH_SERIAL_NO1_C 0 0 255 Identification No.1 of C color LPH - O X
749-019 LPH_SERIAL_NO1_K 0 0 255 Identification No.1 of K color LPH - O X
749-020 LPH_SERIAL_NO2_Y 0 0 255 Identification No.2 of Y color LPH - O X
749-021 LPH_SERIAL_NO2_M 0 0 255 Identification No.2 of M color LPH - O X
749-022 LPH_SERIAL_NO2_C 0 0 255 Identification No.2 of C color LPH - O X
749-023 LPH_SERIAL_NO2_K 0 0 255 Identification No.2 of K color LPH - O X
749-024 LPH_SERIAL_NO3_Y 0 0 255 Identification No.3 of Y color LPH - O X
749-025 LPH_SERIAL_NO3_M 0 0 255 Identification No.3 of M color LPH - O X
749-026 LPH_SERIAL_NO3_C 0 0 255 Identification No.3 of C color LPH - O X
749-027 LPH_SERIAL_NO3_K 0 0 255 Identification No.3 of K color LPH - O X
749-028 LPH_SERIAL_NO4_Y 0 0 255 Identification No.4 of Y color LPH - O X
749-029 LPH_SERIAL_NO4_M 0 0 255 Identification No.4 of M color LPH - O X
749-030 LPH_SERIAL_NO4_C 0 0 255 Identification No.4 of C color LPH - O X
 Table 1 NVM 749_LPH List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
749-031 LPH_SERIAL_NO4_K 0 0 255 Identification No.4 of K color LPH - O X
749-032 LPH_SERIAL_NO5_Y 0 0 255 Identification No.5 of Y color LPH - O X
749-033 LPH_SERIAL_NO5_M 0 0 255 Identification No.5 of M color LPH - O X
749-034 LPH_SERIAL_NO5_C 0 0 255 Identification No.5 of C color LPH - O X
749-035 LPH_SERIAL_NO5_K 0 0 255 Identification No. 5 of K color LPH - O X
749-036 LPH_SERIAL_NO6_Y 0 0 255 Identification No.6 of Y color LPH - O X
749-037 LPH_SERIAL_NO6_M 0 0 255 Identification No.6 of M color LPH - O X
749-038 LPH_SERIAL_NO6_C 0 0 255 Identification No.6 of C color LPH - O X
749-039 LPH_SERIAL_NO6_K 0 0 255 Identification No.6 of K color LPH - O X
749-040 LPH_SERIAL_NO7_Y 0 0 255 Identification No.7 of Y color LPH - O X
749-041 LPH_SERIAL_NO7_M 0 0 255 Identification No.7 of M color LPH - O X
749-042 LPH_SERIAL_NO7_C 0 0 255 Identification No.7 of C color LPH - O X
749-043 LPH_SERIAL_NO7_K 0 0 255 Identification No.7 of K color LPH - O X
749-044 LPH_DC_POWER_COR_Y 180 0 511 Light amount standard value that corrects the Y color LPH light amount individual differ- - O O
ence.
bit0~7: Light amount standard value of IBY Register LPH (Lower)
bit8~15: Light amount standard value of IBY Register LPH (Upper)
749-045 LPH_DC_POWER_COR_M 180 0 511 Light mount standard value that corrects the M color LPH light amount individual differ- - O O
ence.
bit0~7: Light amount standard value of IBY Register LPH (Lower)
bit8~15: Light amount standard value of IBY Register LPH (Upper)
749-046 LPH_DC_POWER_COR_C 180 0 511 Light mount standard value that corrects the C color LPH light amount individual differ- - O O
ence.
bit0~7: Light amount standard value of IBY Register LPH (Lower)
bit8~15: Light amount standard value of IBY Register LPH (Upper)
749-047 LPH_DC_POWER_COR_K 180 0 511 Light mount standard value that corrects the K color LPH light amount individual differ- - O O
ence.
bit0~7: Light amount standard value of IBY Register LPH (Lower)
bit8~15: Light amount standard value of IBY Register LPH (Upper)
749-048 LPH_DOT_NUM_0 32 10 255 Sets to IBY Register DOT_NUM when changing the process speed. - O O
(During HSYNC Fixed Mode) (During Process Speed=63mm/s)
749-049 LPH_DOT_NUM_1 16 10 255 Sets to IBY Register DOT_NUM when changing the process speed. - O O
(During HSYNC Fixed Mode) (During Process Speed=126mm/s)
749-051 LPH_DOT_NUM_SUB_0 111 0 255 Sets to IBY Register DOT_NUM_SUB when changing the process speed. - O O
(During HSYNC Fixed Mode) (During Process Speed=63mm/s)
749-052 LPH_DOT_NUM_SUB_1 37 0 255 Sets to IBY Register DOT_NUM_SUB when changing the process speed. - O O
(During HSYNC Fixed Mode) (During Process Speed=126mm/s)
749-054 LPH_HSYNC_CYCLE_0 8339 0 65535 Sets to IBY Register HSYNC_CYC_H,L when changing the process speed. - O O
(During HSYNC Fixed Mode) (During Process Speed=63mm/s)
749-055 LPH_HSYNC_CYCLE_1 4169 0 65535 Sets to IBY Register HSYNC_CYC_H,L when changing the process speed. - O O
(During HSYNC Fixed Mode) (During Process Speed=126mm/s)

Version 1.1 05/2014 6.3.10 NVM 749_LPH List

6-65
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-66 6.3.10 NVM 749_LPH List
Table 1 NVM 749_LPH List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
749-057 LPH_VREFLPH_THERM_A_RESULT_Y 0 0 255 Stores the IBY Register THERM_A_RESULT value when setting the light amount (when - O O
Procon light amount is requested).
749-058 LPH_VREFLPH_THERM_A_RESULT_ 0 0 255 Stores the IBY Register THERM_A_RESULT value when setting the light amount (when - O O
M Procon light amount is requested).
749-059 LPH_VREFLPH_THERM_A_RESULT_C 0 0 255 Stores the IBY Register THERM_A_RESULT value when setting the light amount (when - O O
Procon light amount is requested).
749-060 LPH_VREFLPH_THERM_A_RESULT_K 0 0 255 Stores the IBY Register THERM_A_RESULT value when setting the light amount (when - O O
Procon light amount is requested).
749-061 LPH_VREFLPH_THERM_B_RESULT_Y 0 0 255 Stores the IBY Register THERM_B_RESULT value when setting the light amount (when - O O
Procon light amount is requested).
749-062 LPH_VREFLPH_THERM_B_RESULT_ 0 0 255 Stores the IBY Register THERM_B_RESULT value when setting the light amount (when - O O
M Procon light amount is requested).
749-063 LPH_VREFLPH_THERM_B_RESULT_C 0 0 255 Stores the IBY Register THERM_B_RESULT value when setting the light amount (when - O O
Procon light amount is requested).
749-064 LPH_VREFLPH_THERM_B_RESULT_K 0 0 255 Stores the IBY Register THERM_B_RESULT value when setting the light amount (when - O O
Procon light amount is requested).
749-065 LPH_OUT_Y 1023 0 2047 Light amount of Procon demand (Refer to Procon specification) - O O
749-066 LPH_OUT_M 1023 0 2047 Light amount of Procon demand (Refer to Procon specification) - O O
749-067 LPH_OUT_C 1023 0 2047 Light amount of Procon demand (Refer to Procon specification) - O O
749-068 LPH_OUT_K 1023 0 2047 Light amount of Procon demand (Refer to Procon specification) - O O
749-069 LPH_VREFLPH_THERM_REF 40 0 255 Reference Value to derivate the light amount difference from temperature (unit degrees) - O O
749-070 LPH_VREFLPH_THERM_K 25 0 255 Temperature difference contribution (use with /1000) to derivate the light amount differ- - O O
ence from temperature
Example: 25 => 0.025%
749-071 LPH_OUT_LOCAL_Y 1024 0 2047 Value to be set in VREF_LPH which was calculated from LPH_OUT - O O
749-072 LPH_OUT_LOCAL_M 1024 0 2047 Value to be set in VREF_LPH which was calculated from LPH_OUT - O O
749-073 LPH_OUT_LOCAL_C 1024 0 2047 Value to be set in VREF_LPH which was calculated from LPH_OUT - O O
749-074 LPH_OUT_LOCAL_K 1024 0 2047 Value to be set in VREF_LPH which was calculated from LPH_OUT - O O
749-076 LPH_STY_I_ON_A 245 0 65535 Static for coefficient that derivate the value that specifies the reset signal timing from - O O
lighting time, IOT operation. (Use with /10000)
Default Value: 245 => 0.0245
749-077 LPH_STY_I_ON_B 13 0 255 Static for coefficient that derivate the value that specifies the reset signal timing from - O O
lighting time, IOT operation.
749-078 LPH_STY_I_ON_C 63 0 255 Value that specifies the reset signal timing from lighting time that exceeded the specified - O O
amount of time.
749-079 LPH_STY_I_ON_D 2047 0 2047 Use LPH_OUT_LOCAL to derivate the Light Amount Setting Register. Threshold Value - O O
to compare to LPH_OUT_LOCAL.
749-080 LPH_MAX_PLS_A 319 0 65535 Static for coefficient that derivate the maximum no. of light pulse, IOT operation. (Use - O O
with /10000)
Default Value: 329 => 0.0329
749-081 LPH_MAX_PLS_B 9 0 255 Static for coefficient that derivate the maximum no. of light pulse, IOT operation. - O O
 Table 1 NVM 749_LPH List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
749-082 LPH_MAX_PLS_C 0 0 255 Maximum No. of Light Pulse when lighting time exceeds the specified amount of time - O O
749-083 LPH_MAX_PLS_D 2047 0 2047 Use LPH_OUT_LOCAL to derivate the Light Amount Setting Register. Threshold Value - O O
to compare to LPH_OUT_LOCAL.
749-084 LPH_MIN_PLS_A 171 0 65535 Static for coefficient that derivate the minimum no. of light pulse, IOT operation. (Use - O O
with /10000)
Default Value: 158 => 0.0158
749-085 LPH_MIN_PLS_B -3 -127 127 Static for coefficient that derivate the minimum no. of light pulse, IOT operation. - O O
749-086 LPH_MIN_PLS_C 2 0 255 Minimum No. of Light Pulse when lighting time is under the specified amount of time - O O
749-087 LPH_MIN_PLS_D 352 0 2047 Use LPH_OUT_LOCAL to derivate the Light Amount Setting Register. Threshold Value - O O
to compare to LPH_OUT_LOCAL.
749-088 LPH_LIGHT_ON 255 0 255 Perform Determination Switch for LPH Light Setting. - O O
When the following each bit is 0, write "0" to the supported IBY register.
0bit: Y Color SERIAL_SLED_ON Setting
1bit: Y Color WIDTH Setting
2bit: M Color SERIAL_SLED_ON Setting
3bit: M Color WIDTH Setting
4bit: C Color SERIAL_SLED_ON Setting
5bit: C Setting WIDTH Setting
6bit: K Color SERIAL_SLED_ON Setting
7bit: K Color WIDTH Setting
749-089 LPH_PIXCEL_SUM_Y 0 0 4294967295 Store the IBY Pixel Count Register Lead Value to NVM. - O O
· bit0~7: IBY Register Pixel Count Result Output (0~7bit)
· bit8~15: IBY Register Pixel Count Result Output (8~15bit)
· bit16~23: IBY Register Pixel Count Result Output (16~23bit)
· bit24~31: Pixel Count Result Output (24~31bit)
749-090 LPH_PIXCEL_SUM_M 0 0 4294967295 Store the IBY Pixel Count Register Lead Value to NVM. - O O
· bit0~7: IBY Register Pixel Count Result Output (0~7bit)
· bit8~15: IBY Register Pixel Count Result Output (8~15bit)
· bit16~23: IBY Register Pixel Count Result Output (16~23bit)
· bit24~31: Pixel Count Result Output (24~31bit)
749-091 LPH_PIXCEL_SUM_C 0 0 4294967295 Store the IBY Pixel Count Register Lead Value to NVM. - O O
· bit0~7: IBY Register Pixel Count Result Output (0~7bit)
· bit8~15: IBY Register Pixel Count Result Output (8~15bit)
· bit16~23: IBY Register Pixel Count Result Output (16~23bit)
· bit24~31: Pixel Count Result Output (24~31bit)
749-092 LPH_PIXCEL_SUM_K 0 0 4294967295 Store the IBY Pixel Count Register Lead Value to NVM. - O O
· bit0~7: IBY Register Pixel Count Result Output (0~7bit)
· bit8~15: IBY Register Pixel Count Result Output (8~15bit)
· bit16~23: IBY Register Pixel Count Result Output (16~23bit)
· bit24~31: Pixel Count Result Output (24~31bit)
749-093 LPH_LIFE_Y 0 0 4294967295 Save the LPH_PIXCEL_SUM accumulated value, Total no. of LPH light dot. - O X
(6 bytes is needed for NVM restriction, but lower 2 bytes shall be round off. )

Version 1.1 05/2014 6.3.10 NVM 749_LPH List

6-67
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-68 6.3.10 NVM 749_LPH List
Table 1 NVM 749_LPH List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
749-094 LPH_LIFE_M 0 0 4294967295 Save the LPH_PIXCEL_SUM accumulated value, Total no. of LPH light dot. - O X
(6 bytes is needed for NVM restriction, but lower 2 bytes shall be round off. )
749-095 LPH_LIFE_C 0 0 4294967295 Save the LPH_PIXCEL_SUM accumulated value, Total no. of LPH light dot. - O X
(6 bytes is needed for NVM restriction, but lower 2 bytes shall be round off. )
749-096 LPH_LIFE_K 0 0 4294967295 Save the LPH_PIXCEL_SUM accumulated value, Total no. of LPH light dot. - O X
(6 bytes is needed for NVM restriction, but lower 2 bytes shall be round off. )
749-097 LPH_THERM_A_RESULT_Y 0 0 255 Store the IBY Register THERM_A_RESULT Value. - O O
749-098 LPH_THERM_A_RESULT_M 0 0 255 Store the IBY Register THERM_A_RESULT Value. - O O
749-099 LPH_THERM_A_RESULT_C 0 0 255 Store the IBY Register THERM_A_RESULT Value. - O O
749-100 LPH_THERM_A_RESULT_K 0 0 255 Store the IBY Register THERM_A_RESULT Value. - O O
749-101 LPH_THERM_B_RESULT_Y 0 0 255 Store the IBY Register THERM_B_RESULT Value. - O O
749-102 LPH_THERM_B_RESULT_M 0 0 255 Store the IBY Register THERM_B_RESULT Value. - O O
749-103 LPH_THERM_B_RESULT_C 0 0 255 Store the IBY Register THERM_B_RESULT Value. - O O
749-104 LPH_THERM_B_RESULT_K 0 0 255 Store the IBY Register THERM_B_RESULT Value. - O O
749-105 LPH_TP5_CHIP_ENB_A_Y 255 0 255 Specify turning the light ON/OFF in 0~7Chip Forcible Lighting Mode. For Erase Pattern - O O
749-106 LPH_TP5_CHIP_ENB_A_M 255 0 255 Specify turning the light ON/OFF in 0~7Chip Forcible Lighting Mode. For Erase Pattern - O O
749-107 LPH_TP5_CHIP_ENB_A_C 255 0 255 Specify turning the light ON/OFF in 0~7Chip Forcible Lighting Mode. For Erase Pattern - O O
749-108 LPH_TP5_CHIP_ENB_A_K 255 0 255 Specify turning the light ON/OFF in 0~7Chip Forcible Lighting Mode. For Erase Pattern - O O
749-109 LPH_TP5_CHIP_ENB_B_Y 255 0 255 Specify turning the light ON/OFF in 8~15Chip Forcible Lighting Mode. For Erase Pattern - O O
749-110 LPH_TP5_CHIP_ENB_B_M 255 0 255 Specify turning the light ON/OFF in 8~15Chip Forcible Lighting Mode. For Erase Pattern - O O
749-111 LPH_TP5_CHIP_ENB_B_C 255 0 255 Specify turning the light ON/OFF in 8~15Chip Forcible Lighting Mode. For Erase Pattern - O O
749-112 LPH_TP5_CHIP_ENB_B_K 255 0 255 Specify turning the light ON/OFF in 8~15Chip Forcible Lighting Mode. For Erase Pattern - O O
749-113 LPH_TP5_CHIP_ENB_C_Y 255 0 255 Specify turning the light ON/OFF in 16~23Chip Forcible Lighting Mode. For Erase Pat- - O O
tern
749-114 LPH_TP5_CHIP_ENB_C_M 255 0 255 Specify turning the light ON/OFF in 16~23Chip Forcible Lighting Mode. For Erase Pat- - O O
tern
749-115 LPH_TP5_CHIP_ENB_C_C 255 0 255 Specify turning the light ON/OFF in 16~23Chip Forcible Lighting Mode. For Erase Pat- - O O
tern
749-116 LPH_TP5_CHIP_ENB_C_K 255 0 255 Specify turning the light ON/OFF in 16~23Chip Forcible Lighting Mode. For Erase Pat- - O O
tern
749-117 LPH_TP5_CHIP_ENB_D_Y 63 0 63 Specify turning the light ON/OFF in 24~29Chip Forcible Lighting Mode. For Erase Pat- - O O
tern
749-118 LPH_TP5_CHIP_ENB_D_M 63 0 63 Specify turning the light ON/OFF in 24~29Chip Forcible Lighting Mode. For Erase Pat- - O O
tern
749-119 LPH_TP5_CHIP_ENB_D_C 63 0 63 Specify turning the light ON/OFF in 24~29Chip Forcible Lighting Mode. For Erase Pat- - O O
tern
749-120 LPH_TP5_CHIP_ENB_D_K 63 0 63 Specify turning the light ON/OFF in 24~29Chip Forcible Lighting Mode. For Erase Pat- - O O
tern
749-121 LPH_TP5_LIGHT_PATTERN1_Y 170 0 255 Light Pattern 1 of TP5 forcible lighting - O O
749-122 LPH_TP5_LIGHT_PATTERN1_M 170 0 255 Light Pattern 1 of TP5 forcible lighting - O O
 Table 1 NVM 749_LPH List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
749-123 LPH_TP5_LIGHT_PATTERN1_C 170 0 255 Light Pattern 1 of TP5 forcible lighting - O O
749-124 LPH_TP5_LIGHT_PATTERN1_K 170 0 255 Light Pattern 1 of TP5 forcible lighting - O O
749-125 LPH_TP5_LIGHT_PATTERN2_Y 85 0 255 Light Pattern 2 of TP5 forcible lighting - O O
749-126 LPH_TP5_LIGHT_PATTERN2_M 85 0 255 Light Pattern 2 of TP5 forcible lighting - O O
749-127 LPH_TP5_LIGHT_PATTERN2_C 85 0 255 Light Pattern 2 of TP5 forcible lighting - O O
749-128 LPH_TP5_LIGHT_PATTERN2_K 85 0 255 Light Pattern 2 of TP5 forcible lighting - O O
749-130 LPH_PG_SEL 15 0 255 0~3bit: Specify the color to output with Built-in Pattern. - O O
0bit: Y, 1bit: M, 2bit: C, 3bit: K
Do not use the following in ComponentControl.
4~7bit: Perform Built-in PG Overlay Output when printing
4bit: Y Overlay, 5bit: M Overlay, 6bit: C Overlay, 7bit: K Overlay
749-131 LPH_TP5_LINE 33 0 255 End the forcible lighting after time specified in NVM of component control has passed. 100[ms] O O
Setting ValueX100msec
749-132 LPH_Fail_BYPASS_Y 144 0 255 bit0: LPH Ack Fail, bit1: LPH Read Fail, bit2: LPH_Write_Fail, bit3: LPH_DL_Fail, - O O
bit4: LPH_config_Fail, bit5: LPH_VData_Fail, bit6: LPH_Latch_Fail,
bit7: LPH_ResetDetect_Fail
If each bit is "1", ignore even that Fail generates.
749-133 LPH_Fail_BYPASS_M 144 0 255 bit0: LPH Ack Fail, bit1: LPH Read Fail, bit2: LPH_Write_Fail, bit3: LPH_DL_Fail, - O O
bit4: LPH_config_Fail, bit5: LPH_VData_Fail, bit6: LPH_Latch_Fail,
bit7: LPH_ResetDetect_Fail
If each bit is "1", ignore even that Fail generates.
749-134 LPH_Fail_BYPASS_C 144 0 255 bit0: LPH Ack Fail, bit1: LPH Read Fail, bit2: LPH_Write_Fail, bit3: LPH_DL_Fail, - O O
bit4: LPH_config_Fail, bit5: LPH_VData_Fail, bit6: LPH_Latch_Fail,
bit7: LPH_ResetDetect_Fail
If each bit is "1", ignore even that Fail generates.
749-135 LPH_Fail_BYPASS_K 144 0 255 bit0: LPH Ack Fail, bit1: LPH Read Fail, bit2: LPH_Write_Fail, bit3: LPH_DL_Fail, - O O
bit4: LPH_config_Fail, bit5: LPH_VData_Fail, bit6: LPH_Latch_Fail,
bit7: LPH_ResetDetect_Fail
If each bit is "1", ignore even that Fail generates.
749-136 LPH_LIFE_CLEAR_ON 0 0 1 Determine whether to clear LPH_LIFE or not when LPH_SERIAL is determined for - O O
replacement.
0: Do not clear, 1: Clear
749-137 LPH_FAIL_ADDRESS_Y 0 0 32768 Save the accessed IBY address when LPH_ACK_FAIL, READ_FAIL, WRITE_FAIL - O O
occurred. Maximum Value 256kROM => 0x8000
749-138 LPH_FAIL_ADDRESS_M 0 0 32768 Save the accessed IBY address when LPH_ACK_FAIL, READ_FAIL, WRITE_FAIL - O O
occurred. Maximum Value 256kROM => 0x8000
749-139 LPH_FAIL_ADDRESS_C 0 0 32768 Save the accessed IBY address when LPH_ACK_FAIL, READ_FAIL, WRITE_FAIL - O O
occurred. Maximum Value 256kROM => 0x8000
749-140 LPH_FAIL_ADDRESS_K 0 0 32768 Save the accessed IBY address when LPH_ACK_FAIL, READ_FAIL, WRITE_FAIL - O O
occurred. Maximum Value 256kROM => 0x8000
749-141 LPH_VDATA_CHK 0 0 1 Determine whether to conduct Video Data Interruption Detection Sequence or not. - O O
Perform in the case of 1

Version 1.1 05/2014 6.3.10 NVM 749_LPH List

6-69
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-70 6.3.10 NVM 749_LPH List
Table 1 NVM 749_LPH List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
749-142 LPH_LATCH_CHK 0 0 1 Determine whether to conduct Video Data Latch Teaming Inspection Sequence or not. - O O
Perform in the case of 1
749-143 LPH_VDATA_BP0_Y 15 0 15 Black Data Result of OPEN_CHK_DATA0. - O O
Rewrite only when fail occurs with default value 1111. Overwrite if it occurs a multiple
no. of times.
749-144 LPH_VDATA_BP0_M 15 0 15 Black Data Result of OPEN_CHK_DATA0. - O O
Rewrite only when fail occurs with default value 1111. Overwrite if it occurs a multiple
no. of times.
749-145 LPH_VDATA_BP0_C 15 0 15 Black Data Result of OPEN_CHK_DATA0. - O O
Rewrite only when fail occurs with default value 1111. Overwrite if it occurs a multiple
no. of times.
749-146 LPH_VDATA_BP0_K 15 0 15 Black Data Result of OPEN_CHK_DATA0. - O O
Rewrite only when fail occurs with default value 1111. Overwrite if it occurs a multiple
no. of times.
749-147 LPH_VDATA_BP1_Y 15 0 15 Black Data Result of OPEN_CHK_DATA1. - O O
Rewrite only when fail occurs with default value 1111. Overwrite if it occurs a multiple
no. of times.
749-148 LPH_VDATA_BP1_M 15 0 15 Black Data Result of OPEN_CHK_DATA1. - O O
Rewrite only when fail occurs with default value 1111. Overwrite if it occurs a multiple
no. of times.
749-149 LPH_VDATA_BP1_C 15 0 15 Black Data Result of OPEN_CHK_DATA1. - O O
Rewrite only when fail occurs with default value 1111. Overwrite if it occurs a multiple
no. of times.
749-150 LPH_VDATA_BP1_K 15 0 15 Black Data Result of OPEN_CHK_DATA1. - O O
Rewrite only when fail occurs with default value 1111. Overwrite if it occurs a multiple
no. of times.
749-151 LPH_VDATA_BP2_Y 15 0 15 Black Data Result of OPEN_CHK_DATA2. - O O
Rewrite only when fail occurs with default value 1111. Overwrite if it occurs a multiple
no. of times.
749-152 LPH_VDATA_BP2_M 15 0 15 Black Data Result of OPEN_CHK_DATA2. - O O
Rewrite only when fail occurs with default value 1111. Overwrite if it occurs a multiple
no. of times.
749-153 LPH_VDATA_BP2_C 15 0 15 Black Data Result of OPEN_CHK_DATA2. - O O
Rewrite only when fail occurs with default value 1111. Overwrite if it occurs a multiple
no. of times.
749-154 LPH_VDATA_BP2_K 15 0 15 Black Data Result of OPEN_CHK_DATA2. - O O
Rewrite only when fail occurs with default value 1111. Overwrite if it occurs a multiple
no. of times.
749-155 LPH_VDATA_LATCH0_Y 0 0 6 Maximum Value is 6 for No. of failed Data acquiring when VD_LATCH_SEL=0 - O O
749-156 LPH_VDATA_LATCH0_M 0 0 6 Maximum Value is 6 for No. of failed Data acquiring when VD_LATCH_SEL=0 - O O
749-157 LPH_VDATA_LATCH0_C 0 0 6 Maximum Value is 6 for No. of failed Data acquiring when VD_LATCH_SEL=0 - O O
749-158 LPH_VDATA_LATCH0_K 0 0 6 Maximum Value is 6 for No. of failed Data acquiring when VD_LATCH_SEL=0 - O O
 Table 1 NVM 749_LPH List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
749-159 LPH_VDATA_LATCH1_Y 0 0 6 Maximum Value is 6 for No. of failed Data acquiring when VD_LATCH_SEL=1 - O O
749-160 LPH_VDATA_LATCH1_M 0 0 6 Maximum Value is 6 for No. of failed Data acquiring when VD_LATCH_SEL=1 - O O
749-161 LPH_VDATA_LATCH1_C 0 0 6 Maximum Value is 6 for No. of failed Data acquiring when VD_LATCH_SEL=1 - O O
749-162 LPH_VDATA_LATCH1_K 0 0 6 Maximum Value is 6 for No. of failed Data acquiring when VD_LATCH_SEL=1 - O O
749-163 LPH_VDATA_LATCH2_Y 0 0 6 Maximum Value is 6 for No. of failed Data acquiring when VD_LATCH_SEL=2 - O O
749-164 LPH_VDATA_LATCH2_M 0 0 6 Maximum Value is 6 for No. of failed Data acquiring when VD_LATCH_SEL=2 - O O
749-165 LPH_VDATA_LATCH2_C 0 0 6 Maximum Value is 6 for No. of failed Data acquiring when VD_LATCH_SEL=2 - O O
749-166 LPH_VDATA_LATCH2_K 0 0 6 Maximum Value is 6 for No. of failed Data acquiring when VD_LATCH_SEL=2 - O O
749-167 LPH_VDATA_LATCH3_Y 0 0 6 Maximum Value is 6 for No. of failed Data acquiring when VD_LATCH_SEL=3 - O O
749-168 LPH_VDATA_LATCH3_M 0 0 6 Maximum Value is 6 for No. of failed Data acquiring when VD_LATCH_SEL=3 - O O
749-169 LPH_VDATA_LATCH3_C 0 0 6 Maximum Value is 6 for No. of failed Data acquiring when VD_LATCH_SEL=3 - O O
749-170 LPH_VDATA_LATCH3_K 0 0 6 Maximum Value is 6 for No. of failed Data acquiring when VD_LATCH_SEL=3 - O O
749-171 LPH_VDATA_WP0_Y 0 0 15 White Data Result of OPEN_CHK_DATA0. - O O
Write over only when Failed with Initial Value0000. Overwrite if it occurs a multiple no. of
times.
749-172 LPH_VDATA_WP0_M 0 0 15 White Data Result of OPEN_CHK_DATA0. - O O
Write over only when Failed with Initial Value0000. Overwrite if it occurs a multiple no. of
times.
749-173 LPH_VDATA_WP0_C 0 0 15 White Data Result of OPEN_CHK_DATA0. - O O
Write over only when Failed with Initial Value0000. Overwrite if it occurs a multiple no. of
times.
749-174 LPH_VDATA_WP0_K 0 0 15 White Data Result of OPEN_CHK_DATA0. - O O
Write over only when Failed with Initial Value0000. Overwrite if it occurs a multiple no. of
times.
749-175 LPH_VDATA_WP1_Y 0 0 15 White Data Result of OPEN_CHK_DATA1. - O O
Write over only when Failed with Initial Value0000. Overwrite if it occurs a multiple no. of
times.
749-176 LPH_VDATA_WP1_M 0 0 15 White Data Result of OPEN_CHK_DATA1. - O O
Write over only when Failed with Initial Value0000. Overwrite if it occurs a multiple no. of
times.
749-177 LPH_VDATA_WP1_C 0 0 15 White Data Result of OPEN_CHK_DATA1. - O O
Write over only when Failed with Initial Value0000. Overwrite if it occurs a multiple no. of
times.
749-178 LPH_VDATA_WP1_K 0 0 15 White Data Result of OPEN_CHK_DATA1. - O O
Write over only when Failed with Initial Value0000. Overwrite if it occurs a multiple no. of
times.
749-179 LPH_VDATA_WP2_Y 0 0 15 White Data Result of OPEN_CHK_DATA2. - O O
Write over only when Failed with Initial Value0000. Overwrite if it occurs a multiple no. of
times.

Version 1.1 05/2014 6.3.10 NVM 749_LPH List

6-71
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-72 6.3.10 NVM 749_LPH List
Table 1 NVM 749_LPH List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
749-180 LPH_VDATA_WP2_M 0 0 15 White Data Result of OPEN_CHK_DATA2. - O O
Write over only when Failed with Initial Value0000. Overwrite if it occurs a multiple no. of
times.
749-181 LPH_VDATA_WP2_C 0 0 15 White Data Result of OPEN_CHK_DATA2. - O O
Write over only when Failed with Initial Value0000. Overwrite if it occurs a multiple no. of
times.
749-182 LPH_VDATA_WP2_K 0 0 15 White Data Result of OPEN_CHK_DATA2. - O O
Write over only when Failed with Initial Value0000. Overwrite if it occurs a multiple no. of
times.
749-183 LPH_VD_LATCH_SEL_Y 3 0 7 Store the set value in NVM when Video Data Latch Timing Inspection is conducted. - O O
(00,0110,11)
Set the NVM value to IBY VD_LATCH_SEL Register.
749-184 LPH_VD_LATCH_SEL_M 3 0 7 Store the set value in NVM when Video Data Latch Timing Inspection is conducted. - O O
(00,0110,11)
Set the NVM value to IBY VD_LATCH_SEL Register.
749-185 LPH_VD_LATCH_SEL_C 3 0 7 Store the set value in NVM when Video Data Latch Timing Inspection is conducted. - O O
(00,0110,11)
Set the NVM value to IBY VD_LATCH_SEL Register.
749-186 LPH_VD_LATCH_SEL_K 3 0 7 Store the set value in NVM when Video Data Latch Timing Inspection is conducted. - O O
(00,0110,11)
Set the NVM value to IBY VD_LATCH_SEL Register.
749-187 LPH_XTALK_CHK 0 0 1 Determine whether to conduct XTALK Detection or not - O O
749-188 LPH_VDATA_CHK_ALL 1 0 1 Determine whether to conduct Video Data Interruption Detection Sequence or not - O O
749-189 Thin Line Correction Switch 0 0 1 The Thin Line Correction Settings ON/OFF Switch - O O
0: Do not correct, 1: Correct
749-190 Thin Line Correction_ADC_SW 0 0 1 Thin Line Correction Control off Operation - O O
0: Forcible OFF the Thin Line Correction, 1: Do not forcible OFF the Thin Line Correc-
tion
749-191 Sub-Scanning Direction Patch Size No 1 0 3 Specify the sub-scanning direction size of Cin Determine Window - O O
749-192 Thin Line Correction Low Cin 20 0 110 Saturation Point of Low Cin (L_cin) % O O
749-193 Thin Line Correction High Cin 80 0 110 Saturation Point of High Cin (H_cin) % O O
749-194 Delta density up Y 200 140 255 Thin Line Correction Amount [0.5%] Y Color - O O
749-195 Delta density up M 200 140 255 Thin Line Correction Amount [0.5%] M Color - O O
749-196 Delta density up C 200 140 255 Thin Line Correction Amount [0.5%] C Color - O O
749-197 Delta density up K 200 140 255 Thin Line Correction Amount [0.5%] K Color - O O
749-198 Smile Correction Switch 0 0 1 Smile Correction Setting Switch [ 0: Do not perform, 1: Perform] - O O
749-199 Smile Position Y B 52 1 308 Smile Correction Peak Position Point B (distance from O/B edge) Y Color mm O O
749-200 Smile Position M B 52 1 308 Smile Correction Peak Position Point B (distance from O/B edge) M Color mm O O
749-201 Smile Position C B 52 1 308 Smile Correction Peak Position Point B (distance from O/B edge) C Color mm O O
749-202 Smile Position K B 52 1 308 Smile Correction Peak Position Point B (distance from O/B edge) K Color mm O O
749-203 Smile Position Y C 103 1 308 Smile Correction Peak Position Point C (distance from O/B edge) Y Color mm O O
 Table 1 NVM 749_LPH List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
749-204 Smile Position M C 103 1 308 Smile Correction Peak Position Point C (distance from O/B edge) M Color mm O O
749-205 Smile Position C C 103 1 308 Smile Correction Peak Position Point C (distance from O/B edge) C Color mm O O
749-206 Smile Position K C 103 1 308 Smile Correction Peak Position Point C (distance from O/B edge) K Color mm O O
749-207 Smile Position Y D 154 1 308 Smile Correction Peak Position Point D (distance from O/B edge) Y Color mm O O
749-208 Smile Position M D 154 1 308 Smile Correction Peak Position Point D (distance from O/B edge) M Color mm O O
749-209 Smile Position C D 154 1 308 Smile Correction Peak Position Point D (distance from O/B edge) C Color mm O O
749-210 Smile Position K D 154 1 308 Smile Correction Peak Position Point D (distance from O/B edge) K Color mm O O
749-211 Smile Position Y E 206 1 308 Smile Correction Peak Position Point E (distance from O/B edge) Y Color mm O O
749-212 Smile Position M E 206 1 308 Smile Correction Peak Position Point E (distance from O/B edge) M Color mm O O
749-213 Smile Position C E 206 1 308 Smile Correction Peak Position Point E (distance from O/B edge) C Color mm O O
749-214 Smile Position K E 206 1 308 Smile Correction Peak Position Point E (distance from O/B edge) K Color mm O O
749-215 Smile Position Y F 257 1 308 Smile Correction Peak Position Point F (distance from O/B edge) Y Color mm O O
749-216 Smile Position M F 257 1 308 Smile Correction Peak Position Point F (distance from O/B edge) M Color mm O O
749-217 Smile Position C F 257 1 308 Smile Correction Peak Position Point F (distance from O/B edge) C Color mm O O
749-218 Smile Position K F 257 1 308 Smile Correction Peak Position Point F (distance from O/B edge) K Color mm O O
749-219 In Out Tendency Y 0 -20 20 The IN OUT Slant Selection Y Color % O O
749-220 In Out Tendency M 0 -20 20 The IN OUT Slant Selection M Color % O O
749-221 In Out Tendency C 0 -20 20 The IN OUT Slant Selection C Color % O O
749-222 In Out Tendency K 0 -20 20 The IN OUT Slant Selection K Color % O O
749-223 Smile Pattern Y 1 1 6 The Smile Correction Pattern Selection Y Color - O O
749-224 Smile Pattern M 1 1 6 The Smile Correction Pattern Selection M Color - O O
749-225 Smile Pattern C 1 1 6 The Smile Correction Pattern Selection C Color - O O
749-226 Smile Pattern K 1 1 6 The Smile Correction Pattern Selection K Color - O O
749-227 Smile Level Y 1 1 6 The Smile Correction Level Selection Y Color - O O
[(Value - 1) x 4%]
749-228 Smile Level M 1 1 6 The Smile Correction Level Selection M Color - O O
[(Value - 1) x 4%]
749-229 Smile Level C 1 1 6 The Smile Correction Level Selection C Color - O O
[(Value - 1) x 4%]
749-230 Smile Level K 1 1 6 The Smile Correction Level Selection K Color - O O
[(Value - 1) x 4%]
749-231 Smile Custom Y A 0 -20 20 The Smile Custom Correction Ratio Y Color % O O
749-232 Smile Custom M A 0 -20 20 The Smile Custom Correction Ratio M Color % O O
749-233 Smile Custom C A 0 -20 20 The Smile Custom Correction Ratio C Color % O O
749-234 Smile Custom K A 0 -20 20 The Smile Custom Correction Ratio K Color % O O
749-235 Smile Custom Y B 0 -20 20 The Smile Custom Correction Ratio Y Color % O O
749-236 Smile Custom M B 0 -20 20 The Smile Custom Correction Ratio M Color % O O
749-237 Smile Custom C B 0 -20 20 The Smile Custom Correction Ratio C Color % O O
749-238 Smile Custom K B 0 -20 20 The Smile Custom Correction Ratio K Color % O O

Version 1.1 05/2014 6.3.10 NVM 749_LPH List

6-73
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-74 6.3.10 NVM 749_LPH List
Table 1 NVM 749_LPH List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
749-239 Smile Custom Y C 0 -20 20 The Smile Custom Correction Ratio Y Color % O O
749-240 Smile Custom M C 0 -20 20 The Smile Custom Correction Ratio M Color % O O
749-241 Smile Custom C C 0 -20 20 The Smile Custom Correction Ratio C Color % O O
749-242 Smile Custom K C 0 -20 20 The Smile Custom Correction Ratio K Color % O O
749-243 Smile Custom Y D 0 -20 20 The Smile Custom Correction Ratio Y Color % O O
749-244 Smile Custom M D 0 -20 20 The Smile Custom Correction Ratio M Color % O O
749-245 Smile Custom C D 0 -20 20 The Smile Custom Correction Ratio C Color % O O
749-246 Smile Custom K D 0 -20 20 The Smile Custom Correction Ratio K Color % O O
749-247 Smile Custom Y E 0 -20 20 The Smile Custom Correction Ratio Y Color % O O
749-248 Smile Custom M E 0 -20 20 The Smile Custom Correction Ratio M Color % O O
749-249 Smile Custom C E 0 -20 20 The Smile Custom Correction Ratio C Color % O O
749-250 Smile Custom K E 0 -20 20 The Smile Custom Correction Ratio K Color % O O
749-251 Smile Custom Y F 0 -20 20 The Smile Custom Correction Ratio Y Color % O O
749-252 Smile Custom M F 0 -20 20 The Smile Custom Correction Ratio M Color % O O
749-253 Smile Custom C F 0 -20 20 The Smile Custom Correction Ratio C Color % O O
749-254 Smile Custom K F 0 -20 20 The Smile Custom Correction Ratio K Color % O O
749-255 Smile Custom Y G 0 -20 20 The Smile Custom Correction Ratio Y Color % O O
749-256 Smile Custom M G 0 -20 20 The Smile Custom Correction Ratio M Color % O O
749-257 Smile Custom C G 0 -20 20 The Smile Custom Correction Ratio C Color % O O
749-258 Smile Custom K G 0 -20 20 The Smile Custom Correction Ratio K Color % O O
749-259 LPH_LIMIT_SEL 0 0 1 From which mode to bring the LPH Light Amount Upper/Lower Limit. - O O
0: LPF Light Amount Upper/Lower Limit when FC is full speed
1: LPF Light Amount Upper/Lower Limit when BW is full speed
749-260 SMILE_COMP_RATIO 100 0 100 Compression Ratio of Smile Correction % O O
749-261 UPPER_LIMIT_FLAG 0 0 1 Make it 1 if compressed with upper limit of LPH light amount when correcting Smile. - O O
Everything else is 0
749-262 LOWER_LIMIT_FLAG 0 0 1 Make it 1 if compressed with lower limit of LPH light amount when correcting Smile. - O O
Everything else is 0
749-263 LPH_THERMK_Y 10 0 255 Auto Feedback Correction Coefficient of Temperature of IBY Temperature Light Amount - O O
Correction
749-264 LPH_THERMK_M 10 0 255 Auto Feedback Correction Coefficient of Temperature of IBY Temperature Light Amount - O O
Correction
749-265 LPH_THERMK_C 10 0 255 Auto Feedback Correction Coefficient of Temperature of IBY Temperature Light Amount - O O
Correction
749-266 LPH_THERMK_K 10 0 255 Auto Feedback Correction Coefficient of Temperature of IBY Temperature Light Amount - O O
Correction
749-267 LPH_YMC_CLK_ENB 0 0 1 0: Do not perform YMC setting during Single K Print. (Initial Value) - O O
1: Stop the IBY clock during Single K Print.
 Table 1 NVM 749_LPH List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
749-268 LPH_YMC_INHIBIT_TRANS_ON 0 0 1 If LPH_YMC_INHIBIT_TRANS_ON (NVM) = 1, to stop the transmission of IBY of YMC - O O
during Single K Print, put INHIBIT_TRANS to 1 (ON).
If LPH_YMC_INHIBIT_TRANS_ON (NVM) = 0, to not stop the transmission of IBY of
YMC during Single K Print, put INHIBIT_TRANS to 0 (OFF).
0: Transmit with YMC, 1: Do not transmit with YMC
749-269 LPH_WARM_ON 0 0 1 0: Do not perform default value, Heat Cycle - O O
1: Perform Heat Cycle
749-270 LPH_WARM_WAIT 10 0 255 Unit: 100msec, Default Value: 10 (1.0 sec) 100[ms] O O
749-271 LPH_PG_MODE_Y 1 0 7 PATTERN GENERATER MODE - O O
Select TP1~6 ON/OFF.
749-272 LPH_PG_MODE_M 1 0 7 PATTERN GENERATER MODE - O O
Select TP1~6 ON/OFF.
749-273 LPH_PG_MODE_C 1 0 7 PATTERN GENERATER MODE - O O
Select TP1~6 ON/OFF.
749-274 LPH_PG_MODE_K 1 0 7 PATTERN GENERATER MODE - O O
Select TP1~6 ON/OFF.
749-275 LPH_SMILE_USHAPE_ON 6 0 255 Switches the ON/OFF for usage in IOT for Light Amount Correction Function of IBY. - O O
bit0: NotUsed
bit1: Specify whether to conduct USHAPE Correction SW, Ushapa Correction or not
bit2: Specify whether to mirror image invert the Ushape Correction of Even Number Chip
bit3: NotUsed
bit4~bit5: SW to select CRATIO_THERM_SEL
bit6~bit7: NotUsed
749-276 LPH_CRATIO_THERM_SEL 0 0 255 Select the IBY Vitta Correction Function - O O
0: C_RATIO_CUL_S=CRATIO_SIGN
1: Integer part of C_RATIO_CUL_S =THERM_DELTA * THERM_K/64
2, 3: C_RATIO_CUL_S =NOD_LIGHTON_NUM[7: 0] * XTALK_M[7: 0]/64 Integer Part
749-332 LPH_UC_Y 650 0 2047 Coefficient to use when deriving USHAPE_A[0](calculation value), USHAPE_B[0](calcu- - O O
lation value)
749-333 LPH_UC_M 650 0 2047 Coefficient to use when deriving USHAPE_A[0](calculation value), USHAPE_B[0](calcu- - O O
lation value)
749-334 LPH_UC_C 650 0 2047 Coefficient to use when deriving USHAPE_A[0](calculation value), USHAPE_B[0](calcu- - O O
lation value)
749-335 LPH_UC_K 650 0 2047 Coefficient to use when deriving USHAPE_A[0](calculation value), USHAPE_B[0](calcu- - O O
lation value)
749-336 LPH_OUT_LOCAL_OFFSET_Y 0 0 2047 Comparison reference value with LPH_OUT_LOCAL. - O O
749-337 LPH_OUT_LOCAL_OFFSET_M 0 0 2047 Comparison reference value with LPH_OUT_LOCAL. - O O
749-338 LPH_OUT_LOCAL_OFFSET_C 0 0 2047 Comparison reference value with LPH_OUT_LOCAL. - O O
749-339 LPH_OUT_LOCAL_OFFSET_K 0 0 2047 Comparison reference value with LPH_OUT_LOCAL. - O O
749-428 LPH_HSYNC_BLANK 19 0 255 Interval of 1 Line Lap (usec) - O O
Idle Period=(LPH_HSYNC_BLANK+1)/10
0.1~25.5usec

Version 1.1 05/2014 6.3.10 NVM 749_LPH List

6-75
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-76 6.3.10 NVM 749_LPH List
Table 1 NVM 749_LPH List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
749-429 HSYNC Fixed Mode 0 0 255 When changing the Process Speed, - O O
0: Set the Calculation Value to IBY.
1: Set the NVM Value to IBY.
749-430 SOS_CYC_E0 30787 0 1048575 Setting Value of SOS Lap when light comes on during half speed - O O
749-431 SOS_CYC_E1 15393 0 1048575 Setting Value of SOS Lap when light comes on during full speed - O O
749-432 LPH_DOT_NUM_E0 32 10 255 Sets to IBY Register DOT_NUM when changing the process speed. (During half speed) - O O
(When light goes on forcibly)
749-433 LPH_DOT_NUM_E1 16 10 255 Sets to IBY Register DOT_NUM when changing the process speed. (During full speed) - O O
(When light goes on forcibly)
749-434 LPH_DOT_NUM_SUB_E0 173 0 255 Sets to IBY Register DOT_NUM_SUB when changing the process speed. - O O
(When light goes on forcibly)(During half speed)
749-435 LPH_DOT_NUM_SUB_E1 36 0 255 Sets to IBY Register DOT_NUM_SUB when changing the process speed. - O O
(When light goes on forcibly)(During full speed)
749-436 LPH_HSYNC_CYCLE_E0 8466 0 65535 Sets to IBY Register HSYNC_CYC_H,L when changing the process speed. - O O
(When light goes on forcibly)(During half speed)
749-437 LPH_HSYNC_CYCLE_E1 4233 0 65535 Sets to IBY Register HSYNC_CYC_H,L when changing the process speed. - O O
(When light goes on forcibly)(During full speed)
749-438 LPH_VDATA_CHK_COLOR 3 0 3 When conducting Video Data Interruption Detection Sequence for 1 color, store the last - O O
color.
0: Y, 1: M, 2: C, 3: K
749-439 LPH_FAIL_LATCH_PRIORITY 27 0 255 Priority when there is multiple Latch Timing which was not determined as Fail/ - O O
Priority: bit0, 1
2nd Priority: bit2, 3
3rd Priority: bit4, 5
4th Priority: bit6, 7
3, 2, 1, 0 in the order of (default Value 11, 10, 01, 00)
= > 00 01 10 11 => 1B
749-440 LPH_YMC_INH_FAIL 0 0 1 0: The IBY Register accessed by this operation is not subject to read, write, ack Fail. - O O
(Target Fail does not generate)
1: The IBY Register accessed by this operation is subject to read, write, ack Fail. (Target
Fail generates)
749-441 LPH_YMC_INHIBIT_TRANS_GAP 0 0 1 0: Do not switch the INHIBIT_TRANCE setting to YMC to by Page when Single K Print. - O O
(Initial Value)
1: Switch the INHIBIT_TRANCE setting to YMC to by Page when Single K Print.
749-442 LPH_PG_SEL_LM1 4 0 4 Color setting when printing in DC612 LPH Vitta Evaluation Chart (LM1) - O O
0: Single Color Y, 1: Single Color M, 2: Single Color C, 3: Single Color K, 4: FC
6.3.11 NVM 750_Xero/Clean 1 List
Table 1 NVM 750_Xero/Clean 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
750-001 #Y Drum Cycle (Total Cycle of all PS) 0 0 4294967295 Drum Life Management Counter: Number of all PS Drum rotation from Drum Mot 0.1[Cycle] O O
ON to OFF
750-002 #M Drum Cycle (Total Cycle of all PS) 0 0 4294967295 Drum Life Management Counter: Number of all PS Drum rotation from Drum Mot 0.1[Cycle] O O
ON to OFF
750-003 #C Drum Cycle (Total Cycle of all PS) 0 0 4294967295 Drum Life Management Counter: Number of all PS Drum rotation from Drum Mot 0.1[Cycle] O O
ON to OFF
750-004 #K Drum Cycle (Total Cycle of all PS) 0 0 4294967295 Drum Life Management Counter: Number of all PS Drum rotation from Drum Mot 0.1[Cycle] O O
ON to OFF
750-005 #Y Drum PV (Total PV of all PS) 0 0 4294967295 Drum Life Management Counter: PV O O
750-006 #M Drum PV (Total PV of all PS) 0 0 4294967295 Drum Life Management Counter: PV O O
750-007 #C Drum PV (Total PV of all PS) 0 0 4294967295 Drum Life Management Counter: PV O O
750-008 #K Drum PV (Total PV of all PS) 0 0 4294967295 Drum Life Management Counter: PV O O
750-009 #Y Total Cycle (Total Cycle of all PS) 0 0 4294967295 Number of cycle as a Drum Cartridge: Number of all PS Drum rotation from Drum 0.1[Cycle] O O
Mot ON to OFF
750-010 #M Total Cycle (Total Cycle of all PS) 0 0 4294967295 Number of cycle as a Drum Cartridge: Number of all PS Drum rotation from Drum 0.1[Cycle] O O
Mot ON to OFF
750-011 #C Total Cycle (Total Cycle of all PS) 0 0 4294967295 Number of cycle as a Drum Cartridge: Number of all PS Drum rotation from Drum 0.1[Cycle] O O
Mot ON to OFF
750-012 #K Total Cycle (Total Cycle of all PS) 0 0 4294967295 Number of cycle as a Drum Cartridge: Number of all PS Drum rotation from Drum 0.1[Cycle] O O
Mot ON to OFF
750-013 #Y Total PV (Total PV of all PS) 0 0 4294967295 PV as a Drum Cartridge PV O O
750-014 #M Total PV (Total PV of all PS) 0 0 4294967295 PV as a Drum Cartridge PV O O
750-015 #C Total PV (Total PV of all PS) 0 0 4294967295 PV as a Drum Cartridge PV O O
750-016 #K Total PV (Total PV of all PS) 0 0 4294967295 PV as a Drum Cartridge PV O O
750-017 #Y Drum Cycle #63mm/s 0 0 4294967295 Number of Drum rotation by process speed from Drum Mot ON to OFF. 0.1[Cycle] O O
750-018 #M Drum Cycle #63mm/s 0 0 4294967295 Number of Drum rotation by process speed from Drum Mot ON to OFF. 0.1[Cycle] O O
750-019 #C Drum Cycle #63mm/s 0 0 4294967295 Number of Drum rotation by process speed from Drum Mot ON to OFF. 0.1[Cycle] O O
750-020 #K Drum Cycle #63mm/s 0 0 4294967295 Number of Drum rotation by process speed from Drum Mot ON to OFF. 0.1[Cycle] O O
750-021 #Y Drum Cycle #126mm/s 0 0 4294967295 Number of Drum rotation by process speed from Drum Mot ON to OFF. 0.1[Cycle] O O
750-022 #M Drum Cycle #126mm/s 0 0 4294967295 Number of Drum rotation by process speed from Drum Mot ON to OFF. 0.1[Cycle] O O
750-023 #C Drum Cycle #126mm/s 0 0 4294967295 Number of Drum rotation by process speed from Drum Mot ON to OFF. 0.1[Cycle] O O
750-024 #K Drum Cycle #126mm/s 0 0 4294967295 Number of Drum rotation by process speed from Drum Mot ON to OFF. 0.1[Cycle] O O
750-025 #Y Total PV #63mm/s 0 0 4294967295 Counter by Process Speed PV O O
750-026 #M Total PV #63mm/s 0 0 4294967295 Counter by Process Speed PV O O
750-027 #C Total PV #63mm/s 0 0 4294967295 Counter by Process Speed PV O O
750-028 #K Total PV #63mm/s 0 0 4294967295 Counter by Process Speed PV O O
750-029 #Y Total PV #126mm/s 0 0 4294967295 Counter by Process Speed PV O O

Version 1.1 05/2014 6.3.11 NVM 750_Xero/Clean 1 List

6-77
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-78 6.3.11 NVM 750_Xero/Clean 1 List
Table 1 NVM 750_Xero/Clean 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
750-030 #M Total PV #126mm/s 0 0 4294967295 Counter by Process Speed PV O O
750-031 #C Total PV #126mm/s 0 0 4294967295 Counter by Process Speed PV O O
750-032 #K Total PV #126mm/s 0 0 4294967295 Counter by Process Speed PV O O
750-033 M/C Total Cycle 0 0 4294967295 M/C Total Number of Drum Rotation. Maintain the Total Cycle as M/C even CRU 0.1[Cycle] O O
is replaced
750-034 #Y Predicted Film Thickness 22000000 0 4294967295 The estimated film thickness value of the Drum is updated to the CRUM NVM [pm] O O
750-035 #M Predicted Film Thickness 22000000 0 4294967295 The estimated film thickness value of the Drum is updated to the CRUM NVM [pm] O O
750-036 #C Predicted Film Thickness 22000000 0 4294967295 The estimated film thickness value of the Drum is updated to the CRUM NVM [pm] O O
750-037 #K Predicted Film Thickness 22000000 0 4294967295 The estimated film thickness value of the Drum is updated to the CRUM NVM [pm] O O
750-038 #Y Low A/C Band ICDC Integrated Value 0 0 15000000 Low A/C Band ICDC Integrated Value ICDC O O
750-039 #M Low A/C Band ICDC Integrated Value 0 0 15000000 Low A/C Band ICDC Integrated Value ICDC O O
750-040 #C Low A/C Band ICDC Integrated Value 0 0 15000000 Low A/C Band ICDC Integrated Value ICDC O O
750-041 #K Low A/C Band ICDC Integrated Value 0 0 15000000 Low A/C Band ICDC Integrated Value ICDC O O
6.3.12 NVM 751_Xero/Clean 2 List
Table 1 NVM 751_Xero/Clean 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
751-001 #Y BCR DC Vm0 Output Value 0 0 1300 Resolution: 6.5V/Step, Output NVM: 01300 V O O
751-002 #M BCR DC Vm0 Output Value 0 0 1300 Resolution: 6.5V/Step, Output NVM: 01300 V O O
751-003 #C BCR DC Vm0 Output Value 0 0 1300 Resolution: 6.5V/Step, Output NVM: 01300 V O O
751-004 #K BCR DC Vm0 Output Value 0 0 1300 Resolution: 6.5V/Step, Output NVM: 01300 V O O
751-005 #Y BCR DC Vm1 Output Value 0 0 1300 Resolution: 6.5V/Step, Output NVM: 01300 V O O
751-006 #M BCR DC Vm1 Output Value 0 0 1300 Resolution: 6.5V/Step, Output NVM: 01300 V O O
751-007 #C BCR DC Vm1 Output Value 0 0 1300 Resolution: 6.5V/Step, Output NVM: 01300 V O O
751-008 #K BCR DC Vm1 Output Value 0 0 1300 Resolution: 6.5V/Step, Output NVM: 01300 V O O
751-009 #Y BCR DC Vm2 Output Value 0 0 1300 Resolution: 6.5V/Step, Output NVM: 01300 V O O
751-010 #M BCR DC Vm2 Output Value 0 0 1300 Resolution: 6.5V/Step, Output NVM: 01300 V O O
751-011 #C BCR DC Vm2 Output Value 0 0 1300 Resolution: 6.5V/Step, Output NVM: 01300 V O O
751-012 #K BCR DC Vm2 Output Value 0 0 1300 Resolution: 6.5V/Step, Output NVM: 01300 V O O
751-013 #Y BCR DC Vm3 Output Value 0 0 1300 Resolution: 6.5V/Step, Output NVM: 01300 V O O
751-014 #M BCR DC Vm3 Output Value 0 0 1300 Resolution: 6.5V/Step, Output NVM: 01300 V O O
751-015 #C BCR DC Vm3 Output Value 0 0 1300 Resolution: 6.5V/Step, Output NVM: 01300 V O O
751-016 #K BCR DC Vm3 Output Value 0 0 1300 Resolution: 6.5V/Step, Output NVM: 01300 V O O
751-017 #Y BCR DC Vm4 Output Value 0 0 1300 Resolution: 6.5V/Step, Output NVM: 01300 V O O
751-018 #M BCR DC Vm4 Output Value 0 0 1300 Resolution: 6.5V/Step, Output NVM: 01300 V O O
751-019 #C BCR DC Vm4 Output Value 0 0 1300 Resolution: 6.5V/Step, Output NVM: 01300 V O O
751-020 #K BCR DC Vm4 Output Value 0 0 1300 Resolution: 6.5V/Step, Output NVM: 01300 V O O
751-021 #Y BCR DC Vm0 Correction #63mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-022 #M BCR DC Vm0 Correction #63mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-023 #C BCR DC Vm0 Correction #63mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-024 #K BCR DC Vm0 Correction #63mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-025 #Y BCR DC Vm1 Correction #63mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-026 #M BCR DC Vm1 Correction #63mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-027 #C BCR DC Vm1 Correction #63mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-028 #K BCR DC Vm1 Correction #63mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-029 #Y BCR DC Vm2 Correction #63mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-030 #M BCR DC Vm2 Correction #63mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-031 #C BCR DC Vm2 Correction #63mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-032 #K BCR DC Vm2 Correction #63mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-033 #Y BCR DC Vm3 Correction #63mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-034 #M BCR DC Vm3 Correction #63mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-035 #C BCR DC Vm3 Correction #63mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-036 #K BCR DC Vm3 Correction #63mm/s 0 -1024 1023 BCR DC Output Correction Value V O O

Version 1.1 05/2014 6.3.12 NVM 751_Xero/Clean 2 List

6-79
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-80 6.3.12 NVM 751_Xero/Clean 2 List
Table 1 NVM 751_Xero/Clean 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
751-037 #Y BCR DC Vm4 Correction #63mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-038 #M BCR DC Vm4 Correction #63mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-039 #C BCR DC Vm4 Correction #63mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-040 #K BCR DC Vm4 Correction #63mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-041 #Y BCR DC Vm0 Correction #126mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-042 #M BCR DC Vm0 Correction #126mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-043 #C BCR DC Vm0 Correction #126mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-044 #K BCR DC Vm0 Correction #126mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-045 #Y BCR DC Vm1 Correction #126mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-046 #M BCR DC Vm1 Correction #126mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-047 #C BCR DC Vm1 Correction #126mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-048 #K BCR DC Vm1 Correction #126mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-049 #Y BCR DC Vm2 Correction #126mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-050 #M BCR DC Vm2 Correction #126mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-051 #C BCR DC Vm2 Correction #126mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-052 #K BCR DC Vm2 Correction #126mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-053 #Y BCR DC Vm3 Correction #126mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-054 #M BCR DC Vm3 Correction #126mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-055 #C BCR DC Vm3 Correction #126mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-056 #K BCR DC Vm3 Correction #126mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-057 #Y BCR DC Vm4 Correction #126mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-058 #M BCR DC Vm4 Correction #126mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-059 #C BCR DC Vm4 Correction #126mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-060 #K BCR DC Vm4 Correction #126mm/s 0 -1024 1023 BCR DC Output Correction Value V O O
751-061 BCR Type SW 0 0 1 0: Refer to CRUM, 1: Refer to NVM - O O
751-062 #Y BCR Class Coefficient #Environment No.1 128 1 255 BCR Class Coefficient - O O
751-063 #M BCR Class Coefficient #Environment No.1 128 1 255 BCR Class Coefficient - O O
751-064 #C BCR Class Coefficient #Environment No.1 128 1 255 BCR Class Coefficient - O O
751-065 #K BCR Class Coefficient #Environment No.1 128 1 255 BCR Class Coefficient - O O
751-066 #Y BCR Class Coefficient #Environment No.2 128 1 255 BCR Class Coefficient - O O
751-067 #M BCR Class Coefficient #Environment No.2 128 1 255 BCR Class Coefficient - O O
751-068 #C BCR Class Coefficient #Environment No.2 128 1 255 BCR Class Coefficient - O O
751-069 #K BCR Class Coefficient #Environment No.2 128 1 255 BCR Class Coefficient - O O
751-070 #Y BCR Class Coefficient #Environment No.3 128 1 255 BCR Class Coefficient - O O
751-071 #M BCR Class Coefficient #Environment No.3 128 1 255 BCR Class Coefficient - O O
751-072 #C BCR Class Coefficient #Environment No.3 128 1 255 BCR Class Coefficient - O O
751-073 #K BCR Class Coefficient #Environment No.3 128 1 255 BCR Class Coefficient - O O
751-074 #Y BCR Class Coefficient #Environment No.4 128 1 255 BCR Class Coefficient - O O
 Table 1 NVM 751_Xero/Clean 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
751-075 #M BCR Class Coefficient #Environment No.4 128 1 255 BCR Class Coefficient - O O
751-076 #C BCR Class Coefficient #Environment No.4 128 1 255 BCR Class Coefficient - O O
751-077 #K BCR Class Coefficient #Environment No.4 128 1 255 BCR Class Coefficient - O O
751-078 #Y BCR Class Coefficient #Environment No.5 128 1 255 BCR Class Coefficient - O O
751-079 #M BCR Class Coefficient #Environment No.5 128 1 255 BCR Class Coefficient - O O
751-080 #C BCR Class Coefficient #Environment No.5 128 1 255 BCR Class Coefficient - O O
751-081 #K BCR Class Coefficient #Environment No.5 128 1 255 BCR Class Coefficient - O O
751-082 #Y BCR Class Coefficient #Environment No.6 128 1 255 BCR Class Coefficient - O O
751-083 #M BCR Class Coefficient #Environment No.6 128 1 255 BCR Class Coefficient - O O
751-084 #C BCR Class Coefficient #Environment No.6 128 1 255 BCR Class Coefficient - O O
751-085 #K BCR Class Coefficient #Environment No.6 128 1 255 BCR Class Coefficient - O O
751-086 #Y BCR Class Coefficient #Environment No.7 128 1 255 BCR Class Coefficient - O O
751-087 #M BCR Class Coefficient #Environment No.7 128 1 255 BCR Class Coefficient - O O
751-088 #C BCR Class Coefficient #Environment No.7 128 1 255 BCR Class Coefficient - O O
751-089 #K BCR Class Coefficient #Environment No.7 128 1 255 BCR Class Coefficient - O O
751-090 #Y BCR Class Coefficient #Environment No.8 128 1 255 BCR Class Coefficient - O O
751-091 #M BCR Class Coefficient #Environment No.8 128 1 255 BCR Class Coefficient - O O
751-092 #C BCR Class Coefficient #Environment No.8 128 1 255 BCR Class Coefficient - O O
751-093 #K BCR Class Coefficient #Environment No.8 128 1 255 BCR Class Coefficient - O O
751-094 #Y BCR Class Coefficient #Environment No.9 128 1 255 BCR Class Coefficient - O O
751-095 #M BCR Class Coefficient #Environment No.9 128 1 255 BCR Class Coefficient - O O
751-096 #C BCR Class Coefficient #Environment No.9 128 1 255 BCR Class Coefficient - O O
751-097 #K BCR Class Coefficient #Environment No.9 128 1 255 BCR Class Coefficient - O O
751-098 #Y BCR Class Coefficient #Environment No.10 128 1 255 BCR Class Coefficient - O O
751-099 #M BCR Class Coefficient #Environment No.10 128 1 255 BCR Class Coefficient - O O
751-100 #C BCR Class Coefficient #Environment No.10 128 1 255 BCR Class Coefficient - O O
751-101 #K BCR Class Coefficient #Environment No.10 128 1 255 BCR Class Coefficient - O O
751-102 #Y BCR Class Offset Value #Environment No.1 0 -128 127 BCR Class Offset Value - O O
751-103 #M BCR Class Offset Value #Environment 0 -128 127 BCR Class Offset Value - O O
No.1
751-104 #C BCR Class Offset Value #Environment No.1 0 -128 127 BCR Class Offset Value - O O
751-105 #K BCR Class Offset Value #Environment No.1 0 -128 127 BCR Class Offset Value - O O
751-106 #Y BCR Class Offset Value #Environment No.2 0 -128 127 BCR Class Offset Value - O O
751-107 #M BCR Class Offset Value #Environment 0 -128 127 BCR Class Offset Value - O O
No.2
751-108 #C BCR Type Offset Value #Environment No.2 0 -128 127 BCR Class Offset Value - O O
751-109 #K BCR Type Offset Value #Environment No.2 0 -128 127 BCR Class Offset Value - O O
751-110 #Y BCR Type Offset Value #Environment No.3 0 -128 127 BCR Class Offset Value - O O

Version 1.1 05/2014 6.3.12 NVM 751_Xero/Clean 2 List

6-81
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-82 6.3.12 NVM 751_Xero/Clean 2 List
Table 1 NVM 751_Xero/Clean 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
751-111 #M BCR Class Offset Value #Environment 0 -128 127 BCR Class Offset Value - O O
No.3
751-112 #C BCR Class Offset Value #Environment No.3 0 -128 127 BCR Class Offset Value - O O
751-113 #K BCR Class Offset Value #Environment No.3 0 -128 127 BCR Class Offset Value - O O
751-114 #Y BCR Class Offset Value #Environment No.4 0 -128 127 BCR Class Offset Value - O O
751-115 #M BCR Class Offset Value #Environment 0 -128 127 BCR Class Offset Value - O O
No.4
751-116 #C BCR Class Offset Value #Environment No.4 0 -128 127 BCR Class Offset Value - O O
751-117 #K BCR Class Offset Value #Environment No.4 0 -128 127 BCR Class Offset Value - O O
751-118 #Y BCR Class Offset Value #Environment No.5 0 -128 127 BCR Class Offset Value - O O
751-119 #M BCR Class Offset Value #Environment 0 -128 127 BCR Class Offset Value - O O
No.5
751-120 #C BCR Class Offset Value #Environment No.5 0 -128 127 BCR Class Offset Value - O O
751-121 #K BCR Class Offset Value #Environment No.5 0 -128 127 BCR Class Offset Value - O O
751-122 #Y BCR Class Offset Value #Environment No.6 0 -128 127 BCR Class Offset Value - O O
751-123 #M BCR Class Offset Value #Environment 0 -128 127 BCR Class Offset Value - O O
No.6
751-124 #C BCR Class Offset Value #Environment No.6 0 -128 127 BCR Class Offset Value - O O
751-125 #K BCR Class Offset Value #Environment No.6 0 -128 127 BCR Class Offset Value - O O
751-126 #Y BCR Class Offset Value #Environment No.7 0 -128 127 BCR Class Offset Value - O O
751-127 #M BCR Class Offset Value #Environment 0 -128 127 BCR Class Offset Value - O O
No.7
751-128 #C BCR Class Offset Value #Environment No.7 0 -128 127 BCR Class Offset Value - O O
751-129 #K BCR Class Offset Value #Environment No.7 0 -128 127 BCR Class Offset Value - O O
751-130 #Y BCR Class Offset Value #Environment No.8 0 -128 127 BCR Class Offset Value - O O
751-131 #M BCR Class Offset Value #Environment 0 -128 127 BCR Class Offset Value - O O
No.8
751-132 #C BCR Class Offset Value #Environment No.8 0 -128 127 BCR Class Offset Value - O O
751-133 #K BCR Class Offset Value #Environment No.8 0 -128 127 BCR Class Offset Value - O O
751-134 #Y BCR Class Offset Value #Environment No.9 0 -128 127 BCR Class Offset Value - O O
751-135 #M BCR Class Offset Value #Environment 0 -128 127 BCR Class Offset Value - O O
No.9
751-136 #C BCR Class Offset Value #Environment No.9 0 -128 127 BCR Class Offset Value - O O
751-137 #K BCR Class Offset Value #Environment No.9 0 -128 127 BCR Class Offset Value - O O
751-138 #Y BCR Class Offset Value #Environment 0 -128 127 BCR Class Offset Value - O O
No.10
751-139 #M BCR Class Offset Value #Environment 0 -128 127 BCR Class Offset Value - O O
No.10
751-140 #C BCR Class Offset Value #Environment 0 -128 127 BCR Class Offset Value - O O
No.10
 Table 1 NVM 751_Xero/Clean 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
751-141 #K BCR Class Offset Value #Environment 0 -128 127 BCR Class Offset Value - O O
No.10
751-142 #Y 1st BTR Neutralizing Output Value 400 0 800 1st BTR Neutralizing Output Value calculated for each Color 0.1[A] O O
751-143 #M 1st BTR Neutralizing Output Value 400 0 800 1st BTR Neutralizing Output Value calculated for each Color 0.1[A] O O
751-144 #C 1st BTR Neutralizing Output Value 400 0 800 1st BTR Neutralizing Output Value calculated for each Color 0.1[A] O O
751-145 #K 1st BTR Neutralizing Output Value 400 0 800 1st BTR Neutralizing Output Value calculated for each Color 0.1[A] O O
751-146 #Y LPH Neutralizing Output Value 0 0 2046 Neutralized Exposure Output Value calculated for each Color (0~1023: V O O
0~TBDV)
751-147 #M LPH Neutralizing Output Value 0 0 2046 Neutralized Exposure Output Value calculated for each Color (0~1023: V O O
0~TBDV)
751-148 #C LPH Neutralizing Output Value 0 0 2046 Neutralized Exposure Output Value calculated for each Color (0~1023: V O O
0~TBDV)
751-149 #K LPH Neutralizing Output Value 0 0 2046 Neutralized Exposure Output Value calculated for each Color (0~1023: V O O
0~TBDV)
751-150 Waste Toner Container Status 0 0 4 0: Ready, 1: Hold, 2: Near Full, 3: Bottle Full, 4: Hold2 - O O
751-151 Waste Toner Container Full Detection SW 1 0 1 0: Do not perform Full Detection, 1: Perform Full Detection - O O
751-152 Waste Toner Container Full Judgment SW 0 0 2 0: Judge using both PV and ICDC (the faster one has priority), 1: Decide - O O
with PV, 2: Decide with ICDC
751-153 PV Threshold Value (Near Full~Full) 1000 0 65000 Total PV Threshold Value from Near Full to Full (Upper Limit Value up to PV O O
Bottle Full)
751-154 ICDC Threshold Value (Near Full~Full) 6500 0 20000 ICDC Threshold Value from Near Full to Full (Upper Limit Value up to Bottle 100[ICDC] O O
Full)
751-155 Hold1 PV Threshold Value (Hold1) 100 0 65000 Total PV Threshold Value from Hold1 to Near PV O O
751-156 Hold2 PV Threshold Value (Hold2) 1500 0 65000 Total PV Threshold Value from Hold2 to New Judgement PV O O
751-157 Waste Toner Container PV (Near Full~Full) 0 0 65000 Total PV from Near Full to Full PV O O
751-158 Waste Toner Container ICDC (Near Full~Full) 0 0 65000 ICDC from Near Full to Full 100 [ICDC] O O
751-159 #Y Waste Toner Container Image ICDC (Near 0 0 4294967295 ICDC of #Y from Near Full to Full (Image) ICDC O O
Full~Full)
751-160 #M Waste Toner Container Image ICDC (Near 0 0 4294967295 ICDC of #M from Near Full to Full (Image) ICDC O O
Full~Full)
751-161 #C Waste Toner Container Image ICDC (Near 0 0 4294967295 ICDC of #C from Near Full to Full (Image) ICDC O O
Full~Full)
751-162 #K Waste Toner Container Image ICDC (Near 0 0 4294967295 ICDC of #K from Near Full to Full (Image) ICDC O O
Full~Full)
751-163 #Y Waste Toner Container Patch ICDC (Near 0 0 4294967295 ICDC of #Y from Near Full to Full (Patch) ICDC O O
Full~Full)
751-164 #M Waste Toner Container Patch ICDC (Near 0 0 4294967295 ICDC of #M from Near Full to Full (Patch) ICDC O O
Full~Full)
751-165 #C Waste Toner Container Patch ICDC (Near 0 0 4294967295 ICDC of #C from Near Full to Full (Patch) ICDC O O
Full~Full)

Version 1.1 05/2014 6.3.12 NVM 751_Xero/Clean 2 List

6-83
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-84 6.3.12 NVM 751_Xero/Clean 2 List
Table 1 NVM 751_Xero/Clean 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
751-166 #K Waste Toner Container Patch ICDC (Near 0 0 4294967295 ICDC of #K from Near Full to Full (Patch) ICDC O O
Full~Full)
751-167 Waste toner Container Hold1 PV 0 0 65000 Total PV from Hold1 to Near PV O O
751-168 #Y Image ICDC Coefficient 50 10 255 Coefficient in #Y ICDC Count (Image) % O O
751-169 #M Image ICDC Coefficient 50 10 255 Coefficient in #M ICDC Count (Image) % O O
751-170 #C Image ICDC Coefficient 50 10 255 Coefficient in #C ICDC Count (Image) % O O
751-171 #K Image ICDC Coefficient 50 10 255 Coefficient in #K ICDC Count (Image) % O O
751-172 #Y Patch ICDC Coefficient 100 10 255 Coefficient in #Y ICDC Count (Patch) % O O
751-173 #M Patch ICDC Coefficient 100 10 255 Coefficient in #M ICDC Count (Patch) % O O
751-174 #C Patch ICDC Coefficient 100 10 255 Coefficient in #C ICDC Count (Patch) % O O
751-175 #K Patch ICDC Coefficient 100 10 255 Coefficient in #Y ICDC Count (Patch) % O O
751-176 Waste toner Container Hold2 PV 0 0 65000 Total PV to decide from Hold2 to New PV O O
751-177 #Y Waste Toner Container Hold2 Image ICDC 0 0 4294967295 ICDC of #Y to decide from Hold2 to New (Image) ICDC O O
751-178 #M Waste Toner Container Hold2 Image ICDC 0 0 4294967295 ICDC of #M to decide from Hold2 to New (Image) ICDC O O
751-179 #C Waste Toner Container Hold2 Image ICDC 0 0 4294967295 ICDC of #C to decide from Hold2 to New (Image) ICDC O O
751-180 #K Waste Toner Container Hold2 Image ICDC 0 0 4294967295 ICDC of #K to decide from Hold2 to New (Image) ICDC O O
751-181 #Y Waste Toner Container Hold2 Patch ICDC 0 0 4294967295 ICDC of #Y to decide from Hold2 to New (Patch) ICDC O O
751-182 #M Waste Toner Container Hold2 Patch ICDC 0 0 4294967295 ICDC of #M to decide from Hold2 to New (Patch) ICDC O O
751-183 #C Waste Toner Container Hold2 Patch ICDC 0 0 4294967295 ICDC of #C to decide from Hold2 to New (Patch) ICDC O O
751-184 #K Waste Toner Container Hold2 Patch ICDC 0 0 4294967295 ICDC of #K to decide from Hold2 to New (Patch) ICDC O O
751-185 Waste Toner Container PV 0 0 4294967295 Total PV for Waste Toner Container PV O O
751-186 Waste Toner Container ICDC 0 0 4294967295 ICDC for Waste Toner Container 100[ICDC] O O
751-187 #Y Waste Toner Container Image ICDC 0 0 4294967295 Image ICDC of #Y for Waste Toner Container 100[ICDC] O O
751-188 #M Waste Toner Container Image ICDC 0 0 4294967295 Image ICDC of #M for Waste Toner Container 100[ICDC] O O
751-189 #C Waste Toner Container Image ICDC 0 0 4294967295 Image ICDC of #C for Waste Toner Container 100[ICDC] O O
751-190 #K Waste Toner Container Image ICDC 0 0 4294967295 Image ICDC of #K for Waste Toner Container 100[ICDC] O O
751-191 #Y Waste Toner Container Patch ICDC 0 0 4294967295 Patch ICDC of #Y for Waste Toner Container 100[ICDC] O O
751-192 #M Waste Toner Container Patch ICDC 0 0 4294967295 Patch ICDC of #M for Waste Toner Container 100[ICDC] O O
751-193 #C Waste Toner Container Patch ICDC 0 0 4294967295 Patch ICDC of #C for Waste Toner Container 100[ICDC] O O
751-194 #K Waste Toner Container Patch ICDC 0 0 4294967295 Patch ICDC of #K for Waste Toner Container 100[ICDC] O O
751-195 Waste Toner Container PV (Near~Full) 0 0 4294967295 Total PV from Near Full to Full PV O O
751-196 #Y Waste Toner Container Image ICDC 0 0 4294967295 ICDC of #Y from Near Full to Full (Image) ICDC O O
(Near~Full)
751-197 #M Waster Toner Container Image ICDC 0 0 4294967295 ICDC of #M from Near Full to Full (Image) ICDC O O
(Near~Full)
751-198 #C Waste Toner Container Image ICDC 0 0 4294967295 ICDC of #C from Near Full to Full (Image) ICDC O O
(Near~Full)
751-199 #K Waste Toner Container Image ICDC 0 0 4294967295 ICDC of #K from Near Full to Full (Image) ICDC O O
(Near~Full)
 Table 1 NVM 751_Xero/Clean 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
751-200 #Y Waste Toner Container Patch ICDC 0 0 4294967295 ICDC of #Y from Near Full to Full (Patch) ICDC O O
(Near~Full)
751-201 #M Waste Toner Container Patch ICDC 0 0 4294967295 ICDC of #M from Near Full to Full (Patch) ICDC O O
(Near~Full)
751-202 #C Waste Toner Container Patch ICDC 0 0 4294967295 ICDC of #C from Near Full to Full (Patch) ICDC O O
(Near~Full)
751-203 #K Waste Toner Container Patch ICDC 0 0 4294967295 ICDC of #K from Near Full to Full (Patch) ICDC O O
(Near~Full)
751-204 No. of #Y Xero Low A/C Toner Band performed 0 0 1023 No. of #Y Xero Low A/C Toner Band performed for Waste Toner Container No. of O O
Times
751-205 No. of #M Xero Low A/C Toner Band performed 0 0 1023 No. of #M Xero Low A/C Toner Band performed for Waste Toner Container No. of O O
Times
751-206 No. of #C Xero Low A/C Toner Band performed 0 0 1023 No. of #C Xero Low A/C Toner Band performed for Waste Toner Container No. of O O
Times
751-207 No. of #K Xero Low A/C Toner Band performed 0 0 1023 No. of #K Xero Low A/C Toner Band performed for Waste Toner Container No. of O O
Times
751-208 No. of #Y Deve Low A/C Toner Band performed 0 0 1023 No. of #Y Deve Low A/C Toner Band performed for Waste Toner Container No. of O O
Times
751-209 No. of #M Deve Low A/C Toner Band per- 0 0 1023 No. of #M Deve Low A/C Toner Band performed for Waste Toner Container No. of O O
formed Times
751-210 No. of #C Deve Low A/C Toner Band per- 0 0 1023 No. of #C Deve Low A/C Toner Band performed for Waste Toner Container No. of O O
formed Times
751-211 No. of #K Deve Low A/C Toner Band performed 0 0 1023 No. of #K Deve Low A/C Toner Band performed for Waste Toner Container No. of O O
Times
751-212 No. of #Y Toner recovery Toner Band per- 0 0 1023 No. of #Y Toner recovery Toner Band performed for Waste Toner Container No. of O O
formed Times
751-213 No. of #M Toner recovery Toner Band per- 0 0 1023 No. of #M Toner recovery Toner Band performed for Waste Toner Container No. of O O
formed Times
751-214 No. of #C Toner recovery Toner Band per- 0 0 1023 No. of #C Toner recovery Toner Band performed for Waste Toner Container No. of O O
formed Times
751-215 No. of #K Toner recovery Toner Band per- 0 0 1023 No. of #K Toner recovery Toner Band performed for Waste Toner Container No. of O O
formed Times
751-216 #Y Dispense Time 0 0 4294967295 #Y Color Toner Dispense Time for Waste Toner Container ms O O
751-217 #M Dispense Time 0 0 4294967295 #M Color Toner Dispense Time for Waste Toner Container ms O O
751-218 #C Dispense Time 0 0 4294967295 #C Color Toner Dispense Time for Waste Toner Container ms O O
751-219 #K Dispense Time 0 0 4294967295 #K Color Toner Dispense Time for Waste Toner Container ms O O
751-220 #Environment No.1 No. of Prints 0 0 4294967295 No. of Prints by Environment for Waste Toner Container PV O O
751-221 #Environment No.2 No. of Prints 0 0 4294967295 No. of Prints by Environment for Waste Toner Container PV O O
751-222 #Environment No.3 No. of Prints 0 0 4294967295 No. of Prints by Environment for Waste Toner Container PV O O
751-223 #Environment No.4 No. of Prints 0 0 4294967295 No. of Prints by Environment for Waste Toner Container PV O O
751-224 #Environment No.5 No. of Prints 0 0 4294967295 No. of Prints by Environment for Waste Toner Container PV O O

Version 1.1 05/2014 6.3.12 NVM 751_Xero/Clean 2 List

6-85
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-86 6.3.12 NVM 751_Xero/Clean 2 List
Table 1 NVM 751_Xero/Clean 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
751-225 #Environment No.6 No. of Prints 0 0 4294967295 No. of Prints by Environment for Waste Toner Container PV O O
751-226 #Environment No.7 No. of Prints 0 0 4294967295 No. of Prints by Environment for Waste Toner Container PV O O
751-227 #Environment No.8 No. of Prints 0 0 4294967295 No. of Prints by Environment for Waste Toner Container PV O O
751-228 #Environment No.9 No. of Prints 0 0 4294967295 No. of Prints by Environment for Waste Toner Container PV O O
751-229 #Environment No.10 No. of Prints 0 0 4294967295 No. of Prints by Environment for Waste Toner Container PV O O
751-230 Plain Paper No. of Prints 0 0 4294967295 No. of Prints by Paper Type Category for Waste Toner Container (Plain) PV O O
Maintain the M/C counter value right after replacing waste container, calcu-
late the difference with M/C counter when acquiring diagnosis data and
make it as Diagnosis Data.
751-231 Heavyweight1 No. of Prints 0 0 4294967295 No. of Prints by Paper Type Category for Waste Toner Container PV O O
(Heavyweight1)
Maintain the M/C counter value right after replacing waste container, calcu-
late the difference with M/C counter when acquiring diagnosis data and
make it as Diagnosis Data.
751-232 Extra Heavyweight No. of Prints 0 0 4294967295 No. of Prints by Paper Type Category for Waste Toner Container (Extra PV O O
Heavyweight)
Maintain the M/C counter value right after replacing waste container, calcu-
late the difference with M/C counter when acquiring diagnosis data and
make it as Diagnosis Data.
751-233 Gloss1 No. of Prints 0 0 4294967295 No. of Prints by Paper Type Category for Waste Toner Container (Gloss1) PV O O
Maintain the M/C counter value right after replacing waste container, calcu-
late the difference with M/C counter when acquiring diagnosis data and
make it as Diagnosis Data.
751-234 Gloss2 No. of Prints 0 0 4294967295 No. of Prints by Paper Type Category for Waste Toner Container (Gloss2) PV O O
Maintain the M/C counter value right after replacing waste container, calcu-
late the difference with M/C counter when acquiring diagnosis data and
make it as Diagnosis Data.
751-235 Other Paper Type No. of Prints 0 0 4294967295 No. of Prints by Paper Type Category for Waste Toner Container (Other PV O O
paper type)
Maintain the M/C counter value right after replacing waste container, calcu-
late the difference with M/C counter when acquiring diagnosis data and
make it as Diagnosis Data.
751-236 Simp No. of Prints 0 0 4294967295 No. of Prints by Tray for Waste Toner Container (Tray1~4, MSI) PV O O
Maintain the M/C counter value right after replacing waste container, calcu-
late the difference with M/C counter when acquiring diagnosis data and
make it as Diagnosis Data.
751-237 Dup No. of Prints 0 0 4294967295 No. of Prints by Tray for Waste Toner Container (Duplex) PV O O
Maintain the M/C counter value right after replacing waste container, calcu-
late the difference with M/C counter when acquiring diagnosis data and
make it as Diagnosis Data.
 Table 1 NVM 751_Xero/Clean 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
751-238 #63mm/s No. of Prints 0 0 4294967295 No. of Prints by Process Speed Category for Waste Toner Container (#PS) PV O O
Maintain the M/C counter value right after replacing waste container, calcu-
late the difference with M/C counter when acquiring diagnosis data and
make it as Diagnosis Data.
751-239 #126mm/s No. of Prints 0 0 4294967295 No. of Prints by Process Speed Category for Waste Toner Container (#PS) PV O O
Maintain the M/C counter value right after replacing waste container, calcu-
late the difference with M/C counter when acquiring diagnosis data and
make it as Diagnosis Data.
751-240 B4S-G No. of Prints 0 0 4294967295 No. of Prints by Size Category for Waste Toner Container (B4S-G) PV O O
Maintain the M/C counter value right after replacing waste container, calcu-
late the difference with M/C counter when acquiring diagnosis data and
make it as Diagnosis Data.
751-241 11X17-G No. of Prints 0 0 4294967295 No. of Prints by Size Category for Waste Toner Container (11X17-G) PV O O
Maintain the M/C counter value right after replacing waste container, calcu-
late the difference with M/C counter when acquiring diagnosis data and
make it as Diagnosis Data.
751-242 11X19-G No. of Prints 0 0 4294967295 No. of Prints by Size Category for Waste Toner Container (11X19-G) PV O O
Maintain the M/C counter value right after replacing waste container, calcu-
late the difference with M/C counter when acquiring diagnosis data and
make it as Diagnosis Data.
751-243 BW No. of Prints 0 0 4294967295 No. of Prints by Color Category for Waste Toner Container (BW) PV O O
Maintain the M/C counter value right after replacing waste container, calcu-
late the difference with M/C counter when acquiring diagnosis data and
make it as Diagnosis Data.
751-244 4Color No. of Prints 0 0 4294967295 No. of Prints by Color Category for Waste Toner Container (4Color) PV O O
Maintain the M/C counter value right after replacing waste container, calcu-
late the difference with M/C counter when acquiring diagnosis data and
make it as Diagnosis Data.
751-245 Blank No. of Prints 0 0 4294967295 No. of Prints by Color Category for Waste Toner Container (Blank) PV O O
Maintain the M/C counter value right after replacing waste container, calcu-
late the difference with M/C counter when acquiring diagnosis data and
make it as Diagnosis Data.
751-246 Xero Initial Band SW 1 0 2 0: Do not perform, 1: Perform, 2: Force Perform - O O
751-247 Xero Initial Band Threshold Value 1000 0 1000 Xero Initial Band Cycle Threshold Value 0.1[Cycle] O O
751-248 #Y Xero Initial Band Cin 100 0 100 Xero Initial Band Cin 0 = 0%, 100 = 100%, Setting is in the increment of 10% % O O
(round down 0~9)
751-249 #M Xero Initial Band Cin 100 0 100 Xero Initial Band Cin 0 = 0%, 100 = 100%, Setting is in the increment of 10% % O O
(round down 0~9)
751-250 #C Xero Initial Band Cin 100 0 100 Xero Initial Band Cin 0 = 0%, 100 = 100%, Setting is in the increment of 10% % O O
(round down 0~9)
751-251 #K Xero Initial Band Cin 100 0 100 Xero Initial Band Cin 0 = 0%, 100 = 100%, Setting is in the increment of 10% % O O
(round down 0~9)
751-252 #Y Xero Initial Band Length 50 0 300 Xero Initial Band Length mm O O

Version 1.1 05/2014 6.3.12 NVM 751_Xero/Clean 2 List

6-87
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-88 6.3.12 NVM 751_Xero/Clean 2 List
Table 1 NVM 751_Xero/Clean 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
751-253 #M Xero Initial Band Length 50 0 300 Xero Initial Band Length mm O O
751-254 #C Xero Initial Band Length 50 0 300 Xero Initial Band Length mm O O
751-255 #K Xero Initial Band Length 50 0 300 Xero Initial Band Length mm O O
751-256 Low A/C Band SW 1 0 1 0: Do not perform, 1: Perform - O O
751-257 #Y Low A/C Band Cin 90 0 100 0 = 0%, 100 = 100%, Setting is in the increments of 10% (round down 0~9) % O O
751-258 #M Low A/C Band Cin 90 0 100 0 = 0%, 100 = 100%, Setting is in the increments of 10% (round down 0~9) % O O
751-259 #C Low A/C Band Cin 90 0 100 0 = 0%, 100 = 100%, Setting is in the increments of 10% (round down 0~9) % O O
751-260 #K Low A/C Band Cin 90 0 100 0 = 0%, 100 = 100%, Setting is in the increments of 10% (round down 0~9) % O O
751-261 #Y Low A/C Band Length 20 0 50 Low A/C Band Length mm O O
751-262 #M Low A/C Band Length 20 0 50 Low A/C Band Length mm O O
751-263 #C Low A/C Band Length 20 0 50 Low A/C Band Length mm O O
751-264 #K Low A/C Band Length 20 0 50 Low A/C Band Length mm O O
751-265 Low A/C Band Threshold Value 30 0 255 Low A/C Band Area Coverage Threshold Value 0.1[%] O O
751-266 #Y Low A/C Band Average A/C 0 0 1000 Low A/C Band Average A/C 0.1[%] O O
751-267 #M Low A/C Band Average A/C 0 0 1000 Low A/C Band Average A/C 0.1[%] O O
751-268 #C Low A/C Band Average A/C 0 0 1000 Low A/C Band Average A/C 0.1[%] O O
751-269 #K Low A/C Band Average A/C 0 0 1000 Low A/C Band Average A/C 0.1[%] O O
751-278 A4L Drum Cycle count Reduced Value (In High 67 0 255 No. of Drum Rotation equivalent to A4L 0.1[Cycle] O O
R/L Mode)
751-279 A4L Drum Cycle count Reduced Value (In Low 67 0 255 No. of Drum Rotation equivalent to A4L 0.1[Cycle] O O
R/L Mode)
751-280 Low R/L Mode Determination Threshold Value 40 0 255 Low R/L Mode Determination Threshold Value 0.1[PV] O O
751-283 Low Speed Band SW 1 0 2 0: Do not perform, 1: Perform after PV count only the Low Speed, 2: Perform - O O
with All Speed
751-284 Low Speed Band Interval 20 0 1023 Low Speed Band Interval PV O O
751-285 #Y Low Speed Band Cin 90 0 100 0 = 0%, 100 = 100%, Setting is in the increments of 10% (round down 0~9) % O O
751-286 #M Low Speed Band Cin 90 0 100 0 = 0%, 100 = 100%, Setting is in the increments of 10% (round down 0~9) % O O
751-287 #C Low Speed Band Cin 90 0 100 0 = 0%, 100 = 100%, Setting is in the increments of 10% (round down 0~9) % O O
751-288 #K Low Speed Band Cin 90 0 100 0 = 0%, 100 = 100%, Setting is in the increments of 10% (round down 0~9) % O O
751-289 #Y Low Speed Band Length 140 0 255 Low Speed Band Length mm O O
751-290 #M Low Speed Band Length 140 0 255 Low Speed Band Length mm O O
751-291 #C Low Speed Band Length 140 0 255 Low Speed Band Length mm O O
751-292 #K Low Speed Band Length 140 0 255 Low Speed Band Length mm O O
751-301 Low Speed Band Temperature Threshold 0 0 1070 Low Speed Band Temperature Threshold Value 0.1 O O
Value [degree]
751-302 Recovery Band SW 1 0 3 0: Do not perform, 1: Perform after charged, 2: Perform when ATC detecting - O O
for Disp calculation, 3: Perform both 1,2
751-303 #Y Recovery Band Cin 90 0 100 0 = 0%, 100 = 100%, Setting is in the increments of 10% (round down 0~9) % O O
751-304 #M Recovery Band Cin 90 0 100 0 = 0%, 100 = 100%, Setting is in the increments of 10% (round down 0~9) % O O
 Table 1 NVM 751_Xero/Clean 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
751-305 #C Recovery Band Cin 90 0 100 0 = 0%, 100 = 100%, Setting is in the increments of 10% (round down 0~9) % O O
751-306 #K Recovery Band Cin 90 0 100 0 = 0%, 100 = 100%, Setting is in the increments of 10% (round down 0~9) % O O
751-307 #Y Recovery Band Length 40 0 50 Recovery Band Length mm O O
751-308 #M Recovery Band Length 40 0 50 Recovery Band Length mm O O
751-309 #C Recovery Band Length 40 0 50 Recovery Band Length mm O O
751-310 #K Recovery Band Length 40 0 50 Recovery Band Length mm O O
751-311 Recovery VH Adjustment Value 0 -1024 1023 Adjust in VH calculated in Procon specification V O O
751-312 Drum Cartridge M/C Operation Switching 0 0 15 M/C Operation switch in Life End/Dead End - O O
751-313 Drum Cartridge Life Determination SW 0 0 1 0: Determine No. of Cycle, 1: Determine PV - O O
751-314 Drum Cartridge Life Determination Threshold 0 0 1 0: Refer to CRUM, 1: Refer to NVM - O O
Value SW
751-315 #Y Life End Film Thickness Threshold Value 13600000 0 30000000 The Drum film thickness threshold value that indicates Life End pm O O
751-316 #M Life End Film Thickness Threshold Value 13600000 0 30000000 The Drum film thickness threshold value that indicates Life End pm O O
751-317 #C Life End Film Thickness Threshold Value 13600000 0 30000000 The Drum film thickness threshold value that indicates Life End pm O O
751-318 #K Life End Film Thickness Threshold Value 13600000 0 30000000 The Drum film thickness threshold value that indicates Life End pm O O
751-319 #Y Dead End Film Thickness Threshold Value 9000000 0 30000000 The Drum film thickness threshold value that indicates Dead End pm O O
751-320 #M Dead End Film Thickness Threshold Value 9000000 0 30000000 The Drum film thickness threshold value that indicates Dead End pm O O
751-321 #C Dead End Film Thickness Threshold Value 9000000 0 30000000 The Drum film thickness threshold value that indicates Dead End pm O O
751-322 #K Dead End Film Thickness Threshold Value 9000000 0 30000000 The Drum film thickness threshold value that indicates Dead End pm O O
751-323 #Y Delta Pre Near Film Thickness Threshold 168000 0 30000000 The Drum film thickness threshold value between Pre Near and Life End pm O O
Value
751-324 #M Delta Pre Near Film Thickness Threshold 168000 0 30000000 The Drum film thickness threshold value between Pre Near and Life End pm O O
Value
751-325 #C Delta Pre Near Film Thickness Threshold 168000 0 30000000 The Drum film thickness threshold value between Pre Near and Life End pm O O
Value
751-326 #K Delta Pre Near Film Thickness Threshold 168000 0 30000000 The Drum film thickness threshold value between Pre Near and Life End pm O O
Value
751-327 #Y Delta Near Film Thickness Threshold Value 50400 0 30000000 The Drum film thickness threshold value between Near and Life End pm O O
751-328 #M Delta Near Film Thickness Threshold Value 50400 0 30000000 The Drum film thickness threshold value between Near and Life End pm O O
751-329 #C Delta Near Film Thickness Threshold Value 50400 0 30000000 The Drum film thickness threshold value between Near and Life End pm O O
751-330 #K Delta Near Film Thickness Threshold Value 50400 0 30000000 The Drum film thickness threshold value between Near and Life End pm O O
751-331 #Y Life End Cycle Threshold Value 7000 0 65535 The Drum Cycle threshold value that indicates Life End 100[Cycle] O O
751-332 #M Life End Cycle Threshold Value 7000 0 65535 The Drum Cycle threshold value that indicates Life End 100[Cycle] O O
751-333 #C Life End Cycle Threshold Value 7000 0 65535 The Drum Cycle threshold value that indicates Life End 100[Cycle] O O
751-334 #K Life End Cycle Threshold Value 7000 0 65535 The Drum Cycle threshold value that indicates Life End 100[Cycle] O O
751-335 #Y Dead End Cycle Threshold Value 10830 0 65535 The Drum Cycle threshold value that indicates Dead End 100[Cycle] O O
751-336 #M Dead End Cycle Threshold Value 10830 0 65535 The Drum Cycle threshold value that indicates Dead End 100[Cycle] O O
751-337 #C Dead End Cycle Threshold Value 10830 0 65535 The Drum Cycle threshold value that indicates Dead End 100[Cycle] O O
751-338 #K Dead End Cycle Threshold Value 10830 0 65535 The Drum Cycle threshold value that indicates Dead End 100[Cycle] O O

Version 1.1 05/2014 6.3.12 NVM 751_Xero/Clean 2 List

6-89
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-90 6.3.12 NVM 751_Xero/Clean 2 List
Table 1 NVM 751_Xero/Clean 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
751-339 #Y Delta Pre Near Cycle Threshold Value 140 0 65535 The Drum Cycle threshold value between Pre Near and Life End 100[Cycle] O O
751-340 #M Delta Pre Near Cycle Threshold Value 140 0 65535 The Drum Cycle threshold value between Pre Near and Life End 100[Cycle] O O
751-341 #C Delta Pre Near Cycle Threshold Value 140 0 65535 The Drum Cycle threshold value between Pre Near and Life End 100[Cycle] O O
751-342 #K Delta Pre Near Cycle Threshold Value 140 0 65535 The Drum Cycle threshold value between Pre Near and Life End 100[Cycle] O O
751-343 #Y Delta Near Cycle Threshold Value 42 0 65535 The Drum Cycle threshold value between Near and Life End 100[Cycle] O O
751-344 #M Delta Near Cycle Threshold Value 42 0 65535 The Drum Cycle threshold value between Near and Life End 100[Cycle] O O
751-345 #C Delta Near Cycle Threshold Value 42 0 65535 The Drum Cycle threshold value between Near and Life End 100[Cycle] O O
751-346 #K Delta Near Cycle Threshold Value 42 0 65535 The Drum Cycle threshold value between Near and Life End 100[Cycle] O O
751-347 #Y Life End PV Threshold Value 1000 0 65535 The Drum PV threshold value that indicates Life End 100[PV] O O
751-348 #M Life End PV Threshold Value 1000 0 65535 The Drum PV threshold value that indicates Life End 100[PV] O O
751-349 #C Life End PV Threshold Value 1000 0 65535 The Drum PV threshold value that indicates Life End 100[PV] O O
751-350 #K Life End PV Threshold Value 1000 0 65535 The Drum PV threshold value that indicates Life End 100[PV] O O
751-351 #Y Dead End PV Threshold Value 1547 0 65535 The Drum PV threshold value that indicates Dead End 100[PV] O O
751-352 #M Dead End PV Threshold Value 1547 0 65535 The Drum PV threshold value that indicates Dead End 100[PV] O O
751-353 #C Dead End PV Threshold Value 1547 0 65535 The Drum PV threshold value that indicates Dead End 100[PV] O O
751-354 #K Dead End PV Threshold Value 1547 0 65535 The Drum PV threshold value that indicates Dead End 100[PV] O O
751-355 #Y Delta Pre Near PV Threshold Value 20 0 65535 The Drum PV threshold value between Pre Near and Life End 100[PV] O O
751-356 #M Delta Pre Near PV Threshold Value 20 0 65535 The Drum PV threshold value between Pre Near and Life End 100[PV] O O
751-357 #C Delta Pre Near PV Threshold Value 20 0 65535 The Drum PV threshold value between Pre Near and Life End 100[PV] O O
751-358 #K Delta Pre Near PV Threshold Value 20 0 65535 The Drum PV threshold value between Pre Near and Life End 100[PV] O O
751-359 #Y Delta Near PV Threshold Value 6 0 65535 The Drum PV threshold value between Near and Life End 100[PV] O O
751-360 #M Delta Near PV Threshold Value 6 0 65535 The Drum PV threshold value between Near and Life End 100[PV] O O
751-361 #C Delta Near PV Threshold Value 6 0 65535 The Drum PV threshold value between Near and Life End 100[PV] O O
751-362 #K Delta Near PV Threshold Value 6 0 65535 The Drum PV threshold value between Near and Life End 100[PV] O O
751-363 #Y Drum Status 0 0 255 Drum Cartridge Status - O O
bit0=1: Ready
bit1=2: Pre Near
bit2=4: Near
bit3=8: Life End (QualityLifeEnd)
bit4=16: Life Over
bit5=32: Life End (Dead End)
751-364 #M Drum Status 0 0 255 Drum Cartridge Status - O O
751-365 #C Drum Status 0 0 255 Drum Cartridge Status - O O
751-366 #K Drum Status 0 0 255 Drum Cartridge Status - O O
751-367 #Y Drum Maximum Usable Amount 3480 0 20000 Estimate Value of Drum PV Life 100[PV] O O
751-368 #M Drum Maximum Usable Amount 3480 0 20000 Estimate Value of Drum PV Life 100[PV] O O
751-369 #C Drum Maximum Usable Amount 3480 0 20000 Estimate Value of Drum PV Life 100[PV] O O
751-370 #K Drum Maximum Usable Amount 3480 0 20000 Estimate Value of Drum PV Life 100[PV] O O
 Table 1 NVM 751_Xero/Clean 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
751-371 #Y Drum Low AC/DC Cycle (Total Cycle of All 0 0 4294967295 No. of Drum Rotation when BCR Low AC or DC output is ON 0.1[Cycle] O O
PS)
751-372 #M Drum Low AC/DC Cycle (Total Cycle of All 0 0 4294967295 No. of Drum Rotation when BCR Low AC or DC output is ON 0.1[Cycle] O O
PS)
751-373 #C Drum Low AC/DC Cycle (Total Cycle of All 0 0 4294967295 No. of Drum Rotation when BCR Low AC or DC output is ON 0.1[Cycle] O O
PS)
751-374 #K Drum Low AC/DC Cycle (Total Cycle of All 0 0 4294967295 No. of Drum Rotation when BCR Low AC or DC output is ON 0.1[Cycle] O O
PS)
751-375 #Y Drum Low AC/DC Cycle #63mm/s 0 0 4294967295 No. of Drum Rotation by Process Speed when BCR Low AC or DC output is 0.1[Cycle] O O
ON
751-376 #M Drum Low AC/DC Cycle #63mm/s 0 0 4294967295 No. of Drum Rotation by Process Speed when BCR Low AC or DC output is 0.1[Cycle] O O
ON
751-377 #C Drum Low AC/DC Cycle #63mm/s 0 0 4294967295 No. of Drum Rotation by Process Speed when BCR Low AC or DC output is 0.1[Cycle] O O
ON
751-378 #K Drum Low AC/DC Cycle #63mm/s 0 0 4294967295 No. of Drum Rotation by Process Speed when BCR Low AC or DC output is 0.1[Cycle] O O
ON
751-379 #Y Drum Low AC/DC Cycle #126mm/s 0 0 4294967295 No. of Drum Rotation by Process Speed when BCR Low AC or DC output is 0.1[Cycle] O O
ON
751-380 #M Drum Low AC/DC Cycle #126mm/s 0 0 4294967295 No. of Drum Rotation by Process Speed when BCR Low AC or DC output is 0.1[Cycle] O O
ON
751-381 #C Drum Low AC/DC Cycle #126mm/s 0 0 4294967295 No. of Drum Rotation by Process Speed when BCR Low AC or DC output is 0.1[Cycle] O O
ON
751-382 #K Drum Low AC/DC Cycle #126mm/s 0 0 4294967295 No. of Drum Rotation by Process Speed when BCR Low AC or DC output is 0.1[Cycle] O O
ON
751-383 #Y #Environment No.1 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-384 #M #Environment No.1 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-385 #C #Environment No.1 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-386 #K #Environment No.1 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-387 #Y #Environment No.2 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-388 #M #Environment No.2 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-389 #C #Environment No.2 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-390 #K #Environment No.2 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF

Version 1.1 05/2014 6.3.12 NVM 751_Xero/Clean 2 List

6-91
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-92 6.3.12 NVM 751_Xero/Clean 2 List
Table 1 NVM 751_Xero/Clean 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
751-391 #Y #Environment No.3 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-392 #M #Environment No.3 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-393 #C #Environment No.3 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-394 #K #Environment No.3 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-395 #Y #Environment No.4 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-396 #M #Environment No.4 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-397 #C #Environment No.4 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-398 #K #Environment No.4 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-399 #Y #Environment No.5 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-400 #M #Environment No.5 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-401 #C #Environment No.5 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-402 #K #Environment No.5 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-403 #Y #Environment No.6 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-404 #M #Environment No.6 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-405 #C #Environment No.6 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-406 #K #Environment No.6 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-407 #Y #Environment No.7 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-408 #M #Environment No.7 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-409 #C #Environment No.7 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-410 #K #Environment No.7 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-411 #Y #Environment No.8 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
 Table 1 NVM 751_Xero/Clean 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
751-412 #M #Environment No.8 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-413 #C #Environment No.8 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-414 #K #Environment No.8 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-415 #Y #Environment No.9 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-416 #M #Environment No.9 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-417 #C #Environment No.9 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-418 #K #Environment No.9 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-419 #Y #Environment No.10 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-420 #M #Environment No.10 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-421 #C #Environment No.10 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-422 #K #Environment No.10 Drum Cycle 0 0 4294967295 Number of Drum rotation by Transfer Environment from Drum Mot ON to 0.1[Cycle] O O
OFF
751-423 #K PV Color (Total Cycle of All PS) 0 0 4294967295 #K Color PV Counter during Color Output PV O O
751-424 #Y Drum Cartridge Replacement Date [Year] 0 0 99 The year Drum Cartridge was replaced - O O
751-425 #M Drum Cartridge Replacement Date [Year] 0 0 99 The year Drum Cartridge was replaced - O O
751-426 #C Drum Cartridge Replacement Date [Year] 0 0 99 The year Drum Cartridge was replaced - O O
751-427 #K Drum Cartridge Replacement Date [Year] 0 0 99 The year Drum Cartridge was replaced - O O
751-428 #Y Drum Cartridge Replacement Date [Month] 0 0 12 The month Drum Cartridge was replaced - O O
751-429 #M Drum Cartridge Replacement Date [Month] 0 0 12 The month Drum Cartridge was replaced - O O
751-430 #C Drum Cartridge Replacement Date [Month] 0 0 12 The month Drum Cartridge was replaced - O O
751-431 #K Drum Cartridge Replacement Date [Month] 0 0 12 The month Drum Cartridge was replaced - O O
751-432 #Y Drum Cartridge Replacement Date [Day] 0 0 31 The day Drum Cartridge was replaced - O O
751-433 #M Drum Cartridge Replacement Date [Day] 0 0 31 The day Drum Cartridge was replaced - O O
751-434 #C Drum Cartridge Replacement Date [Day] 0 0 31 The day Drum Cartridge was replaced - O O
751-435 #K Drum Cartridge Replacement Date [Day] 0 0 31 The day Drum Cartridge was replaced - O O
751-436 Environment Control Switch NVM 1 0 1 Xero Environment Control Switch - O O
(ENV_CTRL_SW)
751-437 #Y Initial Film Thickness 22 0 255 Initial Film Thickness Value of the Drum Micro-m O O
751-438 #M Initial Film Thickness 22 0 255 Initial Film Thickness Value of the Drum Micro-m O O
751-439 #C Initial Film Thickness 22 0 255 Initial Film Thickness Value of the Drum Micro-m O O

Version 1.1 05/2014 6.3.12 NVM 751_Xero/Clean 2 List

6-93
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-94 6.3.12 NVM 751_Xero/Clean 2 List
Table 1 NVM 751_Xero/Clean 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
751-440 #K Initial Film Thickness 22 0 255 Initial Film Thickness Value of the Drum Micro-m O O
751-441 #Y WEAR_CE 12 0 255 Film Thinning Coefficient per Drum Cycle pm/Cycle O O
751-442 #M WEAR_CE 12 0 255 Film Thinning Coefficient per Drum Cycle pm/Cycle O O
751-443 #C WEAR_CE 12 0 255 Film Thinning Coefficient per Drum Cycle pm/Cycle O O
751-444 #K WEAR_CE 12 0 255 Film Thinning Coefficient per Drum Cycle pm/Cycle O O
751-445 Deletion Restore Mode SW 0 0 1 0: Do not perform - O O
1: Perform
751-446 Deletion Temperature Threshold Value 26 -8 60 Deletion Temperature Threshold Value Degree O O
751-447 Deletion Humidity Threshold Value 55 0 107 Deletion Humidity Threshold Value % O O
751-448 Deletion A/C Threshold Value 150 0 1000 Deletion A/C Threshold Value 0.1[%] O O
751-449 #Y Deletion Average A/C 0 0 1000 Deletion Average A/C 0.1[%] O O
751-450 #M Deletion Average A/C 0 0 1000 Deletion Average A/C 0.1[%] O O
751-451 #C Deletion Average A/C 0 0 1000 Deletion Average A/C 0.1[%] O O
751-452 #K Deletion Average A/C 0 0 1000 Deletion Average A/C 0.1[%] O O
751-453 Rest Time Threshold Value 100 0 3000 1440min = 24h min O O
751-454 Stored Rest Time (K) 0 0 4294967295 Stored Sleep Time for Rest Time Calculation (Stored during Drum Mot Stop) - O O
751-455 Stored Rest Time (FC) 0 0 4294967295 Stored Sleep Time for Rest Time Calculation (Stored during Drum Mot Stop - O O
after FC Mode)
751-456 Deletion Restore Mode Run Length 9425 0 30160 9425mm = 100Cycle, 30160mm = 320Cycle (4 minutes) mm O O
751-457 #Y Deletion ICDC Integrated Value 0 0 4294967295 Deletion ICDC Integrated Value ICDC O O
751-458 #M Deletion ICDC Integrated Value 0 0 4294967295 Deletion ICDC Integrated Value ICDC O O
751-459 #C Deletion ICDC Integrated Value 0 0 4294967295 Deletion ICDC Integrated Value ICDC O O
751-460 #K Deletion ICDC Integrated Value 0 0 4294967295 Deletion ICDC Integrated Value ICDC O O
751-461 #Y Deletion Cycle 0 0 4294967295 Drive Time/Drum 0.1 Rotation Time of Drum Mot ON to OFF 0.1[Cycle] O O
751-462 #M Deletion Cycle 0 0 4294967295 Drive Time/Drum 0.1 Rotation Time of Drum Mot ON to OFF 0.1[Cycle] O O
751-463 #C Deletion Cycle 0 0 4294967295 Drive Time/Drum 0.1 Rotation Time of Drum Mot ON to OFF 0.1[Cycle] O O
751-464 #K Deletion Cycle 0 0 4294967295 Drive Time/Drum 0.1 Rotation Time of Drum Mot ON to OFF 0.1[Cycle] O O
751-465 #Y BCR DC Output Value (For I/O Check) 1000 0 1300 The output bias value when performing "#Y BCR DC" at the Component V O O
Control
751-466 #M BCR DC Output Value (For I/O Check) 1000 0 1300 The output bias value when performing "#M BCR DC" at the Component V O O
Control
751-467 #C BCR DC Output Value (For I/O Check) 1000 0 1300 The output bias value when performing "#C BCR DC" at the Component V O O
Control
751-468 #K BCR DC Output Value (For I/O Check) 1000 0 1300 The output bias value when performing "#K BCR DC" at the Component V O O
Control
751-469 #Y Drum Cartridge Reset 0 0 1 Counter Reset only Drum is replaced - O O
751-470 #M Drum Cartridge Reset 0 0 1 Counter Reset only Drum is replaced - O O
751-471 #C Drum Cartridge Reset 0 0 1 Counter Reset only Drum is replaced - O O
751-472 #K Drum Cartridge Reset 0 0 1 Counter Reset only Drum is replaced - O O
 Table 1 NVM 751_Xero/Clean 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
751-473 LetterL-G Print Copies 0 0 4294967295 No. of Prints by Process Speed Category for Waste Toner Container (Let- PV O O
terL-G)
Maintain the M/C counter value right after replacing waste container, calcu-
late the difference with M/C counter when acquiring diagnosis data and
make it as Diagnosis Data.
751-474 A4S-G Print Copies 0 0 4294967295 No. of Prints by Process Speed Category for Waste Toner Container (A4S- PV O O
G)
Maintain the M/C counter value right after replacing waste container, calcu-
late the difference with M/C counter when acquiring diagnosis data and
make it as Diagnosis Data.
751-475 #Y No. of Drum Replacement 0 0 255 No. of Replacement for Drum only Times O O
751-476 #M No. of Drum Replacement 0 0 255 No. of Replacement for Drum only Times O O
751-477 #C No. of Drum Replacement 0 0 255 No. of Replacement for Drum only Times O O
751-478 #K No. of Drum Replacement 0 0 255 No. of Replacement for Drum only Times O O
751-479 #Y HVPS Correction 0 -20 20 5.6V/Step Step O O
751-480 #M HVPS Correction 0 -20 20 5.6V/Step Step O O
751-481 #C HVPS Correction 0 -20 20 5.6V/Step Step O O
751-482 #K HVPS Correction 0 -20 20 5.6V/Step Step O O
751-483 HVPS Correction Amount 56 0 255 0.1[V] O O
751-484 #Y HVPS Correction Value 0 -128 127 V O O
751-485 #M HVPS Correction Value 0 -128 127 V O O
751-486 #C HVPS Correction Value 0 -128 127 V O O
751-487 #K HVPS Correction Value 0 -128 127 V O O
751-488 Altitude Setting Parameter 0 0 10 Step O O
751-489 Altitude Correction Amount -8 -128 127 0.1[V] O O
751-490 Altitude Correction Value 0 -128 127 V O O
751-491 #Y Abrasion Rate 12 0 255 Abrasion Rate per Drum Cycle pm/Cycle O O
751-492 #M Abrasion Rate 12 0 255 Abrasion Rate per Drum Cycle pm/Cycle O O
751-493 #C Abrasion Rate 12 0 255 Abrasion Rate per Drum Cycle pm/Cycle O O
751-494 #K Abrasion Rate 12 0 255 Abrasion Rate per Drum Cycle pm/Cycle O O
751-495 Hold1 ICDC Threshold Value (Hold1) 600 0 65000 ICDC Threshold Value from Hold1 to Near 100[ICDC] O O
751-496 Waste Toner Container Hold1 ICDC 0 0 65000 ICDC from Hold1 to Near 100[ICDC] O O
751-497 #Y Waste Toner Container Hold1 Image ICDC 0 0 4294967295 ICDC of #Y from Hold1 to Near (Image) ICDC O O
751-498 #M Waste Toner Container Hold1 Image ICDC 0 0 4294967295 ICDC of #M from Hold1 to Near (Image) ICDC O O
751-499 #C Waste Toner Container Hold1 Image ICDC 0 0 4294967295 ICDC of #C from Hold1 to Near (Image) ICDC O O
751-500 #K Waste Toner Container Hold1 Image ICDC 0 0 4294967295 ICDC of #K from Hold1 to Near (Image) ICDC O O
751-501 #Y Waste Toner Container Hold1 Patch ICDC 0 0 4294967295 ICDC of #Y from Hold1 to Near (Patch) ICDC O O
751-502 #M Waste Toner Container Hold1 Patch ICDC 0 0 4294967295 ICDC of #M from Hold1 to Near (Patch) ICDC O O
751-503 #C Waste Toner Container Hold1 Patch ICDC 0 0 4294967295 ICDC of #C from Hold1 to Near (Patch) ICDC O O

Version 1.1 05/2014 6.3.12 NVM 751_Xero/Clean 2 List

6-95
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-96 6.3.12 NVM 751_Xero/Clean 2 List
Table 1 NVM 751_Xero/Clean 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
751-504 #K Waste Toner Container Hold1 Patch ICDC 0 0 4294967295 ICDC of #K from Hold1 to Near (Patch) ICDC O O
6.3.13 NVM 752_Process Control 1 List
Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-001 Disp Control SW [YMC] 2 0 2 Toner Refill Control Mode Switch - O O
752-002 Disp Control SW [K] 2 0 2 Toner Refill Control Mode Switch - O O
752-003 Potential Control SW 0 0 2 Potential Control Mode Switch - O O
752-004 ADC Tone Control SW 0 0 1 ADC Tone Control Mode Switch - O O
752-005 TRC Manual Adjustment SW 0 0 1 The TRC manual adjustment mode switch. - O O
752-006 Calibration SW 0 0 3 Auto Gradation Adjustment Application Switch - O O
752-007 Empty Detection SW 0 0 2 Empty Detection Switch (0: OFF 1: ON 2: Detection OFF) - O O
752-008 ProConSetup_SW 1 0 1 Switch for all Procon Setup (0: OFF, 1: ON) - O O
752-009 MiniSetup_SW 1 0 1 MiniSetup Switch (0: OFF, 1: ON) - O O
752-010 MidSetup_SW 1 0 1 MidSetup Switch (0: OFF, 1: ON) - O O
752-011 EndSetup_SW 1 0 1 EndSetup Switch (0: OFF, 1: ON) - O O
752-012 TCSetup_SW 0 0 1 TCSetup Switch (0: OFF, 1: ON) - O O
752-013 MiniSetup Forced Execution Flag 1 0 2 MiniSetup Force Execution Flag (0: Force Execute, 1: Enter - O O
FC_MiniSetup, 2: Enter BW_MiniSetup)
752-014 Front_Interlock_Open_MiniSetup_SW 0 0 1 Switch to Allow/Forbid MiniSetup Execution when Power ON/Sleep - O O
Recovery in Front Interlock Open Status (0: Allow: 1 Disable)
752-015 BW_MiniSetup Priority SW 1 0 1 BW_MiniSetup Priority Switch (0: OFF, 1: ON) - O O
752-016 Setup Continuous Execution after Mini SW 0 0 1 Setup Continuous Execution SW after Mini (0: [Prohibit, 1: Allow) - O O
752-017 CycleDown_SW after MiniSetup 0 0 1 CycleDown_SW after MiniSetup (0: Normal Operation, 1: Always - O O
CycleDown)
752-018 MidSetup_Vcln Create SW 0 0 2 MidSetup Vcln Create Switch (0: Do not always create Vcln, 1: - O O
Always create Vcln, 2: Create Vcin according to Flag)
752-019 EndSetup_Vcln Create SW 2 0 2 EndSetup Vcln Create Switch (0: Do not always create Vcln, 1: - O O
Always create Vcln, 2: Create Vcin according to Flag)
752-020 TCSetup_Vcln Create Switch 0 0 2 TCSetup Vcln Create Switch (0: Do not always create Vcln, 1: - O O
Always create Vcln, 2: Create Vcin according to Flag)
752-021 Vcln Sync Calculation Switch 0 0 1 Vcln Sync Calculation Switch (0: Use All Vcln Mean, 1: Use Vcln - O O
Sync)
752-022 High Image Density Mix Switch 1 0 2 Switch to determine the Mixing Execution during High Image Density - O O
Output (0: No Mixing, 1 With Mixing, 2: With Mixing & Toner Band)
752-023 Vdeve Limit Band Switch 0 0 1 Vdeve Limit Band Switch (0: OFF, 1: ON) - O O
752-024 Deve_Bias_AC_SW 1 0 1 Developing Bias AC Mode Switch (0: OFF, 1: ON) - O O
752-025 ADCLED_SW 0 0 2 ADCLED ON/OFF Switch - O O
752-026 Delta RADC_Potential_Target All Correcting SW 0 0 1 Delta RADC_Potential_Target All Correcting Switch - O O
752-027 Delta RADC_Tone_Target All Correcting SW[Patch1] 1 0 1 Delta RADC_Tone_Target All Correcting Switch - O O
752-028 Delta RADC_Tone_Target All Correcting SW[Patch2] 1 0 1 Delta RADC_Tone_Target All Correcting Switch - O O
752-029 Delta RADC_Tone_Target All Correcting SW[Patch3] 1 0 1 Delta RADC_Tone_Target All Correcting Switch - O O

Version 1.1 05/2014 6.3.13 NVM 752_Process Control 1 List

6-97
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-98 6.3.13 NVM 752_Process Control 1 List
Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-030 Delta RADC_Tone_Target All Correcting SW[Patch4] 1 0 1 Delta RADC_Tone_Target All Correcting Switch - O O
752-031 Delta RADC_TC_Target All Correcting SW 1 0 1 Delta RADC_TC_Target All Correcting Switch - O O
752-032 Delta RADC_TC_Target RDP Correction Amount Clear 0 0 1 Delta RADC_TC_Target RDP Correction Amount Clear SW - O O
SW
752-033 Delta RADC_TC_Target Toner Refill Control Correction 0 0 1 Delta RADC_TC_Target Toner Refill Control Correction Amount - O O
Amount Clear SW Clear SW
752-034 Disp Control SW_Long Length 0 0 1 Dispense Control Switch for Long Length Paper (0: OFF, 1: ON) - O O
752-035 No. of FlagDispMotor Rotation Correction_New Toner 1 0 1 Selection Flag for No. of DispMotor Rotation Correction of New Car- - O O
Cartridge tridge Period
752-036 Correct No. of FlagDispMotor Rotation_recovery Mode 0 0 1 Selection Flag for No. of DispMotor Rotation Correction during Ton- - O O
erRecovery Operation
752-037 No. of FlagDispMotor Rotation Correction_NearEmpty 0 0 1 Selection Flag for No. of DispMotor Rotation Correction after - O O
Detection NearEmpty Detection
752-038 No. of FlagDispMotor Rotation_Normal Operation 0 0 1 Selection Flag for No. of DispMotor Rotation Correction during Nor- - O O
mal Operation
752-039 ADC Toner Refill Control SW[YMC] 0 0 3 SW to instruct to perform ADC Toner Refill Process - O O
752-040 ADC Toner Refill Control SW[K] 0 0 3 SW to instruct to perform ADC Toner Refill Process - O O
752-041 Contrast Ratio Maintenance Control SW 0 0 1 Contrast Ratio Maintenance Control Switch (0: OFF, 1: ON) - O O
* This is for Image CF and there is a separate one for Mini Patch
752-042 Contrast Ratio Maintenance Control SW_Mini Patch 0 0 1 Contrast Ratio Maintenance Control Switch for Mini Patch - O O
0: OFF, 1: ON
752-043 Reflecting Split SW after Mid/TCSetup 0 0 1 Reflecting Split Switch after Mid/TCSetup (0: Batch Reflect, 1: Split - O O
Reflect)
752-044 Potential Reference Selection SW_Standard 1 0 1 Potential Reference Selection SW_Standard (0: VB Reference, 1: RP - O O
Reference)
752-045 Potential Reference Selection SW_Mini 1 0 1 Potential Reference Selection SW_Mini (0: VB Reference, 1: RP Ref- - O O
erence)
752-046 Potential Reference Selection SW_TC 1 0 1 Potential Reference Selection SW_TC (0: VB Reference, 1: RP Ref- - O O
erence)
752-047 Potential Reference Selection SW_PCON 1 0 1 Potential Reference Selection SW_PCON (0: VB Reference, 1: RP - O O
Reference)
752-048 CF_PCON Calculation SW 0 0 1 CF_PCON Calculation Method SW - O O
0: Contrast Ration Standard, 1: Setting CF
752-049 VH Upper Limit Value Calculation SW[Y] 0 0 2 VH Upper Limit Calculate SW (0: VH Upper Limit Fixed Value, 1: - O O
Variable Value with type/altitude correction, 2: Variable Value without
type/altitude correction)
752-050 VH Upper Limit Value Calculation SW[M] 0 0 2 VH Upper Limit Calculate SW (0: VH Upper Limit Fixed Value, 1: - O O
Variable Value with type/altitude correction, 2: Variable Value without
type/altitude correction)
 Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-051 VH Upper Limit Value Calculation SW[C] 0 0 2 VH Upper Limit Calculate SW (0: VH Upper Limit Fixed Value, 1: - O O
Variable Value with type/altitude correction, 2: Variable Value without
type/altitude correction)
752-052 VH Upper Limit Value Calculation SW[K] 0 0 2 VH Upper Limit Calculate SW (0: VH Upper Limit Fixed Value, 1: - O O
Variable Value with type/altitude correction, 2: Variable Value without
type/altitude correction)
752-053 Ghost supported SW[YMC] 0 0 2 Ghost supported SW - O O
0: OFF, 1: VH Lower Limit, 3: Fixed Delta V Offset
752-054 Ghost supported SW[K] 0 0 2 Ghost supported SW - O O
0: OFF, 1: VH Lower Limit, 3: Fixed Delta V Offset
752-055 Barcode ModeSW 0 0 2 Barcode Mode Switch - O X
Default Value 0: Follow the Mode, 1: Force ON, 2: Force OFF
752-056 Custom Mode 1 0 1 0: Normal Mode, 1: Custom Mode - O O
752-057 Toner Recovery SW 0 0 1 Normal Recovery·During Job Recovery Performing Switch (0: OFF, - O O
1: ON)
752-058 Powe ON Determination for Recovery_SW 0 0 1 Perform Determination SW for Power ON Determination (0: Not per- - O O
formed, 1: Perform
752-059 Installed Used CTRG supported SW 0 0 1 Installed Toner Conveyance Path Filling Operation SW in used - O O
CTRG
752-060 Remaining Amount Estimate Method SW 0 0 1 0: Disp Time Integrated Estimate, 1: ICDC Integrated Estimate - O O
752-061 Remaining Notification SW 0 0 1 0: Normal, 1: Always PreNear - O O
752-062 Filling Toner Amount supported SW 1 0 1 0: Filling Toner Amount supported Indication OFF, 1: Filling Toner - O O
Amount supported Indication ON
752-063 PreNear Correction during SW_EP Connection 0 0 1 SW to setup whether to conduct PreNear correction during EP Con- - O O
nection
0: PreNear Correction OFF, 1: PreNear Correction ON
752-064 Delta Humidity Selection SW_Setup Performing Require- 1 0 1 Delta Humidity Selection SW_Setup Performing Requirement - O O
ment
752-065 Delta Humidity Selection SW_Target Value 1 0 1 Delta Humidity Selection SW_Target Value - O O
752-066 Delta Humidity Selection SW_Disp 1 0 1 Delta Humidity Selection SW_Disp - O O
752-067 Delta Humidity Selection SW_Potential 1 0 1 Delta Humidity Selection SW_Potential - O O
752-068 Delta Humidity Selection SW_Device 1 0 1 Delta Humidity Selection SW_Device - O O
752-069 Transfer VH Send Information SW 1 0 1 Transfer VH Send Information SW - O O
752-070 Transfer LUT_SW[Copy] 1 0 1 Transfer LUT Selection SW - O O
752-071 Transfer LUT_SW[Print] 1 0 1 Transfer LUT Selection SW - O O
752-072 ADC Sensor System Fail 0 0 65535 ADC Sensor System Fail - O O
752-073 ADC Sensor Fail Counter 0 0 65535 ADC Sensor Fail Counter - O O
752-074 ADC Potential Patch Fail Counter[Y] 0 0 65535 ADC Potential Patch Fail Counter - O O
752-075 ADC Potential Patch Fail Counter[M] 0 0 65535 ADC Potential Patch Fail Counter - O O
752-076 ADC Potential Patch Fail Counter[C] 0 0 65535 ADC Potential Patch Fail Counter - O O

Version 1.1 05/2014 6.3.13 NVM 752_Process Control 1 List

6-99
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-100 6.3.13 NVM 752_Process Control 1 List
Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-077 ADC Potential Patch Fail Counter[K] 0 0 65535 ADC Potential Patch Fail Counter - O O
752-078 ADC Tone Patch Fail_All Tone[Y] 0 0 1 ADC Tone Patch Fail_All Tone (either one occur) - O O
752-079 ADC Tone Patch Fail_All Tone[M] 0 0 1 ADC Tone Patch Fail_All Tone (either one occur) - O O
752-080 ADC Tone Patch Fail_All Tone[C] 0 0 1 ADC Tone Patch Fail_All Tone (either one occur) - O O
752-081 ADC Tone Patch Fail_All Tone[K] 0 0 1 ADC Tone Patch Fail_All Tone (either one occur) - O O
752-082 ADC Tone Patch Fail Counter [Y][Patch1] 0 0 65535 ADC Tone Patch Fail Counter - O O
752-083 ADC Tone Patch Fail Counter [Y][Patch2] 0 0 65535 ADC Tone Patch Fail Counter - O O
752-084 ADC Tone Patch Fail Counter [Y][Patch3] 0 0 65535 ADC Tone Patch Fail Counter - O O
752-085 ADC Tone Patch Fail Counter [Y][Patch4] 0 0 65535 ADC Tone Patch Fail Counter - O O
752-086 ADC Tone Patch Fail Counter [M][Patch1] 0 0 65535 ADC Tone Patch Fail Counter - O O
752-087 ADC Tone Patch Fail Counter [M][Patch2] 0 0 65535 ADC Tone Patch Fail Counter - O O
752-088 ADC Tone Patch Fail Counter [M][Patch3] 0 0 65535 ADC Tone Patch Fail Counter - O O
752-089 ADC Tone Patch Fail Counter [M][Patch4] 0 0 65535 ADC Tone Patch Fail Counter - O O
752-090 ADC Tone Patch Fail Counter [C][Patch1] 0 0 65535 ADC Tone Patch Fail Counter - O O
752-091 ADC Tone Patch Fail Counter [C][Patch2] 0 0 65535 ADC Tone Patch Fail Counter - O O
752-092 ADC Tone Patch Fail Counter [C][Patch3] 0 0 65535 ADC Tone Patch Fail Counter - O O
752-093 ADC Tone Patch Fail Counter [C][Patch4] 0 0 65535 ADC Tone Patch Fail Counter - O O
752-094 ADC Tone Patch Fail Counter[K][Patch1] 0 0 65535 ADC Tone Patch Fail Counter - O O
752-095 ADC Tone Patch Fail Counter[K][Patch2] 0 0 65535 ADC Tone Patch Fail Counter - O O
752-096 ADC Tone Patch Fail Counter[K][Patch3] 0 0 65535 ADC Tone Patch Fail Counter - O O
752-097 ADC Tone Patch Fail Counter[K][Patch4] 0 0 65535 ADC Tone Patch Fail Counter - O O
752-098 ADC_TC Patch Fail Counter[Y] 0 0 65535 ADC_TC Patch Fail Counter - O O
752-099 ADC_TC Patch Fail Counter[M] 0 0 65535 ADC_TC Patch Fail Counter - O O
752-100 ADC_TC Patch Fail Counter[C] 0 0 65535 ADC_TC Patch Fail Counter - O O
752-101 ADC_TC Patch Fail Counter[K] 0 0 65535 ADC_TC Patch Fail Counter - O O
752-102 ADC_Vpatch Storing Address 0 0 4294967295 ADC Patch Output Measurement Value Storing Address on RAM - O O
(For Soft Debug)
752-103 Creating Flag Toner Band[Y] 0 0 1 Flag for Toner Band Create Determination - O O
752-104 Creating Flag Toner Band[M] 0 0 1 Flag for Toner Band Create Determination - O O
752-105 Creating Flag Toner Band[C] 0 0 1 Flag for Toner Band Create Determination - O O
752-106 Creating Flag Toner Band[K] 0 0 1 Flag for Toner Band Create Determination - O O
752-107 No. of MiniSetup Execution_Total[BW] 0 0 65535 Total No. of Execution of MidSetup - O O
752-108 No. of MiniSetup Execution_Total[FC] 0 0 65535 Total No. of Execution of MidSetup - O O
752-109 No. of MidSetup Execution_Total[BW] 0 0 65535 Total No. of Execution of MidSetup - O O
752-110 No. of MidSetup Execution_Total[FC] 0 0 65535 Total No. of Execution of MidSetup - O O
752-111 No. of EndSetup Execution_Total[BW] 0 0 65535 Total No. of Execution of EndSetup - O O
752-112 No. of EndSetup Execution_Total[FC] 0 0 65535 Total No. of Execution of EndSetup - O O
752-113 No. of TCSetup Execution_Total[BW] 0 0 65535 Total No. of Execution of TCSetup - O O
 Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-114 No. of TCSetup Execution_Total[FC] 0 0 65535 Total No. of Execution of TCSetup - O O
752-115 MiniSetup Execution Requirement [1] 0 0 255 Monitor MiniSetup Execution Requirement - O O
752-116 MiniSetup Execution Requirement [2] 0 0 255 Monitor MiniSetup Execution Requirement - O O
752-117 MiniSetup Execution Requirement [3] 0 0 255 Monitor MiniSetup Execution Requirement - O O
752-118 MiniSetup Execution Requirement_For Entry[1] 0 0 255 MiniSetup Execution Requirement for Entry - O O
752-119 MiniSetup Execution Requirement_For Entry[2] 0 0 255 MiniSetup Execution Requirement for Entry - O O
752-120 MiniSetup Execution Requirement_For Entry[3] 0 0 255 MiniSetup Execution Requirement for Entry - O O
752-123 MiniSetup Execution Time Interval[BW] 480 0 65535 Minisetup Execution Time Interval minute O O
752-124 MiniSetup Execution Time Interval[FC] 360 0 65535 Minisetup Execution Time Interval minute O O
752-125 MiniSetup Execution TIme Interval_JobStart 14400 0 2628000 MiniSetup Execution Time Interval for JobStart minute O O
752-126 MiniSetup Execution Time Interval_FCwhen Black and 360 0 2628000 FC_ MiniSetup Execution Time Interval during Black and White Prior- minute O O
White priority_MiniSetup ity Mode
752-127 ADC_MidSetup Creating interval[Min][BW] 100 0 1023 MidSetup Patch Creating Interval PV O O
752-128 ADC_MidSetup Creating interval[Min][FC] 30 0 1023 MidSetup Patch Creating Interval PV O O
752-129 ADC_MidSetup Creating Interval[Short][BW] 100 0 1023 MidSetup Patch Creating Interval PV O O
752-130 ADC_MidSetup Creating Interval[Short][FC] 30 0 1023 MidSetup Patch Creating Interval PV O O
752-131 ADC_MidSetup Creating Interval[Low AC][BW] 100 0 1023 MidSetup Patch Creating Interval PV O O
752-132 ADC_MidSetup Creating Interval[Low AC][FC] 30 0 1023 MidSetup Patch Creating Interval PV O O
752-133 ADC_MidSetup Creating Interval[Low/High AC][BW] 100 0 1023 MidSetup Patch Creating Interval PV O O
752-134 ADC_MidSetup Creating Interval[Low/High AC][FC] 30 0 1023 MidSetup Patch Creating Interval PV O O
752-135 ADC_MidSetup Creating Interval[Normal][BW] 125 0 1023 MidSetup Patch Creating Interval PV O O
752-136 ADC_MidSetup Creating Interval[Normal][FC] 65 0 1023 MidSetup Patch Creating Interval PV O O
752-137 ADC_EndSetup Creating interval[Min][BW] 42 0 1023 EndSetup Patch Creating Interval PV O O
752-138 ADC_EndSetup Creating interval[Min][FC] 20 0 1023 EndSetup Patch Creating Interval PV O O
752-139 ADC_EndSetup Creating Interval[Short][BW] 42 0 1023 EndSetup Patch Creating Interval PV O O
752-140 ADC_EndSetup Creating Interval[Short][FC] 20 0 1023 EndSetup Patch Creating Interval PV O O
752-141 ADC_EndSetup Creating Interval[Low AC][BW] 42 0 1023 EndSetup Patch Creating Interval PV O O
752-142 ADC_EndSetup Creating Interval[Low AC][FC] 20 0 1023 EndSetup Patch Creating Interval PV O O
752-143 ADC_EndSetup Creating Interval[Low/High AC][BW] 42 0 1023 EndSetup Patch Creating Interval PV O O
752-144 ADC_EndSetup Creating Interval[Low/High AC][FC] 20 0 1023 EndSetup Patch Creating Interval PV O O
752-145 ADC_EndSetup Creating Interval[Normal][BW] 50 0 1023 EndSetup Patch Creating Interval PV O O
752-146 ADC_EndSetup Creating Interval[Normal][FC] 40 0 1023 EndSetup Patch Creating Interval PV O O
752-147 ADC_TCSetup Creating interval[Min][BW] 8 0 1023 TCSetup Patch Creating Interval PV O O
752-148 ADC_TCSetup Creating interval[Min][FC] 8 0 1023 TCSetup Patch Creating Interval PV O O
752-149 ADC_TCSetup Creating Interval[Short][BW] 130 0 1023 TCSetup Patch Creating Interval PV O O
752-150 ADC_TCSetup Creating Interval[Short][FC] 130 0 1023 TCSetup Patch Creating Interval PV O O
752-151 ADC_TCSetup Creating interval[Max][BW] 130 0 1023 TCSetup Patch Creating Interval PV O O
752-152 ADC_TCSetup Creating interval[Max][FC] 130 0 1023 TCSetup Patch Creating Interval PV O O

Version 1.1 05/2014 6.3.13 NVM 752_Process Control 1 List

6-101
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-102 6.3.13 NVM 752_Process Control 1 List
Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-153 ADC_Mid_Disp Request Time_Buffer Threshold 6600 -32768 200000 Buffer Threshold Value for MidSetup Shortened Performance Deter- 1 [ms] O O
Value[YMC] mination
752-154 ADC_Mid_Disp Request Time_Buffer Threshold Value[K] 6600 -32768 200000 Buffer Threshold Value for MidSetup Shortened Performance Deter- 1 [ms] O O
mination
752-155 ADC_End_Disp Request Time_Buffer Threshold 6600 -32768 200000 Buffer Threshold Value for EndSetup Shortened Performance Deter- 1 [ms] O O
Value[YMC] mination
752-156 ADC_End_Disp Request Time_Buffer Threshold 6600 -32768 200000 Buffer Threshold Value for EndSetup Shortened Performance Deter- 1 [ms] O O
Value[K] mination
752-157 ADC_TC_Disp Request Time_Buffer Threshold 6600 -32768 200000 Buffer Threshold Value for TCSetup Shortened Performance Deter- 1 [ms] O O
Value[YMC] mination
752-158 ADC_TC_Disp Request Time_Buffer Threshold Value[K] 6600 -32768 200000 Buffer Threshold Value for TCSetup Shortened Performance Deter- 1 [ms] O O
mination
752-161 ADC_Mid/End Low/High AC Counter[Y] 0 0 255 MidEndSetup Performance Counter during Low->High AC - O O
752-162 ADC_Mid/End Low/High AC Counter[M] 0 0 255 MidEndSetup Performance Counter during Low->High AC - O O
752-163 ADC_Mid/End Low/High AC Counter[C] 0 0 255 MidEndSetup Performance Counter during Low->High AC - O O
752-164 ADC_Mid/End Low/High AC Counter[K] 0 0 255 MidEndSetup Performance Counter during Low->High AC - O O
752-165 High Image Density Band Length 30 0 255 SS Direction Length of HIgh Image Density mm O O
752-166 High Image Density Band Density 85 0 100 High Image Density Band Density % O O
752-167 HIgh Image Density Mixing Panel Length 7 0 255 Panel Length of Mixing Cycle in HIgh Image Density 100[mm] O O
752-168 K Color Mixture Prevention Band Length 160 0 255 Length of SS Direction of K Color Mixture Prevention Band mm O O
752-169 K Color Mixture Prevention Band Density 100 0 100 K Color Mixture Prevention Band Density % O O
752-170 K Color Mixture Prevention Band PV[YMC] 0 0 65535 PV to determine creating K Color Mixture Band - O O
752-171 K Color Mixture Prevention Band PV[K] 0 0 65535 PV to determine creating K Color Mixture Band - O O
752-172 K Color Mixture Prevention Band Determination PV 5000 0 65535 PV Threshold Value to determine creating K Color Mixing Band - O O
Threshold Value
752-173 K Color Mixture Prevention Band Determination Ratio 1000 0 65535 Ratio Threshold Value for determine creating K Color Mixture Pre- - O O
Threshold Value vention Band
752-174 Vdeve Upper Limit Band Length 120 0 255 SS Direction Length of Vdeve Upper Limit Band mm O O
752-175 Vdeve Upper Limit Band Density 100 0 100 Vdeve Upper Limit Band Density % O O
752-176 Vdeve Upper Limit Band Threshold Value 10 1 255 Vdeve Upper Limit Band Threshold Value - O O
752-177 Vdeve Upper Limit Band ICDC Mean Threshold Value1 20 0 65535 ICDC Mean Threshold Value for creating Vdeve Upper Limit Band - O O
752-178 Vdeve Upper Limit Band ICDC Mean Threshold Value2 15 0 65535 ICDC Mean Threshold Value for creating Vdeve Upper Limit Band - O O
752-179 Delta PR Film Decrease Amount Threshold Value_Vdeve 250 0 1023 PR Film Decrease Amount Threshold Value for creating Vdeve 0.1[m] O O
Upper Limit Band Upper Limit Band
752-180 Paper Size 0 0 4 0: A4L/Letter/A4S type, 1: B4S type, 2: A3/"17/"19 type, 3: Long - O O
Length1 type, 4: Long Length2 type
752-181 Screen PV[Copy][YMC] 0 0 4294967295 Screen Individual PV count - O O
752-182 Screen PV[Copy][K] 0 0 4294967295 Screen Individual PV count - O O
752-183 Screen PV[Print2 Value][YMC] 0 0 4294967295 Screen Individual PV count - O O
752-184 Screen PV[Print2 Value][K] 0 0 4294967295 Screen Individual PV count - O O
 Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-185 Screen PV[Print Multi-Value][YMC] 0 0 4294967295 Screen Individual PV count - O O
752-186 Screen PV[Print Multi-Value][K] 0 0 4294967295 Screen Individual PV count - O O
752-187 Previous Panel Speed [YMC] 0 0 1 Process Speed of Last Panel (0: 63mm/s, 1: 126mm/s) - O O
752-188 Previous Panel Speed [K] 0 0 1 Process Speed of Last Panel (0: 63mm/s, 1: 126mm/s) - O O
752-189 Last Setup Speed [YMC] 0 0 1 Process Speed of Last Setup (0: 63mm/s, 1: 126mm/s) - O O
752-190 Last Setup Speed [K] 0 0 1 Process Speed of Last Setup (0: 63mm/s, 1: 126mm/s) - O O
752-191 EndSetup_ADC_Vcln Create Time Interval 60 0 65535 EndSetup_ADC_Vcln Create Time Interval minute O O
752-192 ICDC Moving Average Value Minority][Y] 0 0 65535 The ICDC moving average value obtained using an algorithm similar - O O
to moving average
752-193 ICDC Moving Average Value [Minority] [M] 0 0 65535 The ICDC moving average value obtained using an algorithm similar - O O
to moving average
752-194 ICDC Moving Average Value [Minority] [C] 0 0 65535 The ICDC moving average value obtained using an algorithm similar - O O
to moving average
752-195 ICDC Moving Average Value [Minority] [K] 0 0 65535 The ICDC moving average value obtained using an algorithm similar - O O
to moving average
752-196 ICDC Moving Average Value [Majority] [Y] 0 0 65535 The ICDC moving average value obtained using an algorithm similar - O O
to moving average
752-197 ICDC Moving Average Value [Majority] [M] 0 0 65535 The ICDC moving average value obtained using an algorithm similar - O O
to moving average
752-198 ICDC Moving Average Value [Majority] [C] 0 0 65535 The ICDC moving average value obtained using an algorithm similar - O O
to moving average
752-199 ICDC Moving Average Value [Majority] [K] 0 0 65535 The ICDC moving average value obtained using an algorithm similar - O O
to moving average
752-202 Delta Deve Rotation No. of Sheet[Y] 0 0 65535 Developing Machine Rotation No. of Sheet from Initial Developer 100 [PV] O O
752-203 Delta Deve Rotation No. of Sheet[M] 0 0 65535 Developing Machine Rotation No. of Sheet from Initial Developer 100 [PV] O O
752-204 Delta Deve Rotation No. of Sheet[C] 0 0 65535 Developing Machine Rotation No. of Sheet from Initial Developer 100 [PV] O O
752-205 Delta Deve Rotation No. of Sheet[K] 0 0 65535 Developing Machine Rotation No. of Sheet from Initial Developer 100 [PV] O O
752-206 Delta PR Film Decrease Amount[Y] 0 0 1023 Photoreceptor Film Decrease Amount from Photoreceptor Initial Film 0.1[m] O O
752-207 Delta PR Film Decrease Amount[M] 0 0 1023 Photoreceptor Film Decrease Amount from Photoreceptor Initial Film 0.1[m] O O
752-208 Delta PR Film Decrease Amount[C] 0 0 1023 Photoreceptor Film Decrease Amount from Photoreceptor Initial Film 0.1[m] O O
752-209 Delta PR Film Decrease Amount[K] 0 0 1023 Photoreceptor Film Decrease Amount from Photoreceptor Initial Film 0.1[m] O O
752-210 After Temperature_Fail Determination 0 -128 127 Temperature after Sensor Fail Determination (times1 value) - O O
752-211 After Humidity_Fail Determination 0 0 127 Humidity after Sensor Fail Determination (times 1 value) - O O
752-212 Absolute Humidity 0 0 1023 Absolute Humidity (10times the value of Capacity Absolute Humidity - O O
g/m3)
752-213 Maximum Temperature 0 -1024 1023 Maximum Temperature (times10 value) - O O
752-214 Maximum Humidity 0 0 2047 Maximum Humidity (times10 value) - O O
752-215 RADC_Potential_Reference Target Value[Y] 365 0 1023 RADC Reference Target Value for Potential Control - O O
752-216 RADC_Potential_Reference Target Value[M] 365 0 1023 RADC Reference Target Value for Potential Control - O O

Version 1.1 05/2014 6.3.13 NVM 752_Process Control 1 List

6-103
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-104 6.3.13 NVM 752_Process Control 1 List
Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-217 RADC_Potential_Reference Target Value[C] 352 0 1023 RADC Reference Target Value for Potential Control - O O
752-218 RADC_Potential_Reference Target Value[K] 229 0 1023 RADC Reference Target Value for Potential Control - O O
752-219 RADC_Tone_Reference Target Value[Y][Patch1] 869 0 1023 RADC Reference Target Value for Tone Control - O O
752-220 RADC_Tone_Reference Target Value[Y][Patch2] 654 0 1023 RADC Reference Target Value for Tone Control - O O
752-221 RADC_Tone_Reference Target Value[Y][Patch3] 527 0 1023 RADC Reference Target Value for Tone Control - O O
752-222 RADC_Tone_Reference Target Value[Y][Patch4] 421 0 1023 RADC Reference Target Value for Tone Control - O O
752-223 RADC_Tone_Reference Target Value[M][Patch1] 886 0 1023 RADC Reference Target Value for Tone Control - O O
752-224 RADC_Tone_Reference Target Value[M][Patch2] 637 0 1023 RADC Reference Target Value for Tone Control - O O
752-225 RADC_Tone_Reference Target Value[M][Patch3] 494 0 1023 RADC Reference Target Value for Tone Control - O O
752-226 RADC_Tone_Reference Target Value[M][Patch4] 391 0 1023 RADC Reference Target Value for Tone Control - O O
752-227 RADC_Tone_Reference Target Value[C][Patch1] 868 0 1023 RADC Reference Target Value for Tone Control - O O
752-228 RADC_Tone_Reference Target Value[C][Patch2] 633 0 1023 RADC Reference Target Value for Tone Control - O O
752-229 RADC_Tone_Reference Target Value[C][Patch3] 513 0 1023 RADC Reference Target Value for Tone Control - O O
752-230 RADC_Tone_Reference Target Value[C][Patch4] 390 0 1023 RADC Reference Target Value for Tone Control - O O
752-231 RADC_Tone_Reference Target Value [K][Patch1] 793 0 1023 RADC Reference Target Value for Tone Control - O O
752-232 RADC_Tone_Reference Target Value [K][Patch2] 551 0 1023 RADC Reference Target Value for Tone Control - O O
752-233 RADC_Tone_Reference Target Value [K][Patch3] 399 0 1023 RADC Reference Target Value for Tone Control - O O
752-234 RADC_Tone_Reference Target Value [K][Patch4] 275 0 1023 RADC Reference Target Value for Tone Control - O O
752-235 RADC_TC_Reference Target Value [Y] 596 0 1023 RADC Reference Target Value for TC Control - O O
752-236 RADC_TC_Reference Target Value [M] 566 0 1023 RADC Reference Target Value for TC Control - O O
752-237 RADC_TC_Reference Target Value [C] 576 0 1023 RADC Reference Target Value for TC Control - O O
752-238 RADC_TC_Reference Target Value [K] 417 0 1023 RADC Reference Target Value for TC Control - O O
752-239 RADC_Potential_Correction Target Value[Y] 365 0 1023 RADC_Potential_Correction Target Value - O O
752-240 RADC_Potential_Correction Target Value[M] 365 0 1023 RADC_Potential_Correction Target Value - O O
752-241 RADC_Potential_Correction Target Value[C] 352 0 1023 RADC_Potential_Correction Target Value - O O
752-242 RADC_Potential_Correction Target Value[K] 229 0 1023 RADC_Potential_Correction Target Value - O O
752-243 RADC_Tone_Correction Target Value[Y][Patch1] 869 0 1023 RADC_Tone_Correction Target Value - O O
752-244 RADC_Tone_Correction Target Value[Y][Patch2] 654 0 1023 RADC_Tone_Correction Target Value - O O
752-245 RADC_Tone_Correction Target Value[Y][Patch3] 527 0 1023 RADC_Tone_Correction Target Value - O O
752-246 RADC_Tone_Correction Target Value[Y][Patch4] 421 0 1023 RADC_Tone_Correction Target Value - O O
752-247 RADC_Tone_Correction Target Value[M][Patch1] 886 0 1023 RADC_Tone_Correction Target Value - O O
752-248 RADC_Tone_Correction Target Value[M][Patch2] 637 0 1023 RADC_Tone_Correction Target Value - O O
752-249 RADC_Tone_Correction Target Value[M][Patch3] 494 0 1023 RADC_Tone_Correction Target Value - O O
752-250 RADC_Tone_Correction Target Value[M][Patch4] 391 0 1023 RADC_Tone_Correction Target Value - O O
752-251 RADC_Tone_Correction Target Value[C][Patch1] 868 0 1023 RADC_Tone_Correction Target Value - O O
752-252 RADC_Tone_Correction Target Value[C][Patch2] 633 0 1023 RADC_Tone_Correction Target Value - O O
752-253 RADC_Tone_Correction Target Value[C][Patch3] 513 0 1023 RADC_Tone_Correction Target Value - O O
752-254 RADC_Tone_Correction Target Value[C][Patch4] 390 0 1023 RADC_Tone_Correction Target Value - O O
 Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-255 RADC_Tone_Correction Target Value[K][Patch1] 793 0 1023 RADC_Tone_Correction Target Value - O O
752-256 RADC_Tone_Correction Target Value[K][Patch2] 551 0 1023 RADC_Tone_Correction Target Value - O O
752-257 RADC_Tone_Correction Target Value[K][Patch3] 399 0 1023 RADC_Tone_Correction Target Value - O O
752-258 RADC_Tone_Correction Target Value[K][Patch4] 275 0 1023 RADC_Tone_Correction Target Value - O O
752-259 RADC_TC_Correction Target Value [Y] 596 0 1023 RADC_TC_Correction Target Value - O O
752-260 RADC_TC_Correction Target Value [M] 566 0 1023 RADC_TC_Correction Target Value - O O
752-261 RADC_TC_Correction Target Value [C] 576 0 1023 RADC_TC_Correction Target Value - O O
752-262 RADC_TC_Correction Target Value [K] 417 0 1023 RADC_TC_Correction Target Value - O O
752-263 RADC_Potential_Mini1[Y] 0 0 1023 RADC_Potential_Mini1 Value - O O
752-264 RADC_Potential_Mini1[M] 0 0 1023 RADC_Potential_Mini1 Value - O O
752-265 RADC_Potential_Mini1[C] 0 0 1023 RADC_Potential_Mini1 Value - O O
752-266 RADC_Potential_Mini1[K] 0 0 1023 RADC_Potential_Mini1 Value - O O
752-267 RADC_Potential_Mini2[Y] 0 0 1023 RADC_Potential_Mini2 Value - O O
752-268 RADC_Potential_Mini2[M] 0 0 1023 RADC_Potential_Mini2 Value - O O
752-269 RADC_Potential_Mini2[C] 0 0 1023 RADC_Potential_Mini2 Value - O O
752-270 RADC_Potential_Mini2[K] 0 0 1023 RADC_Potential_Mini2 Value - O O
752-271 RADC_Potential[Y] 0 0 1023 RADC_Potential Value - O O
752-272 RADC_Potential[M] 0 0 1023 RADC_Potential Value - O O
752-273 RADC_Potential[C] 0 0 1023 RADC_Potential Value - O O
752-274 RADC_Potential[K] 0 0 1023 RADC_Potential Value - O O
752-275 RADC_Tone[Y][Patch1] 0 0 1023 RADC_Tone - O O
752-276 RADC_Tone[Y][Patch2] 0 0 1023 RADC_Tone - O O
752-277 RADC_Tone[Y][Patch3] 0 0 1023 RADC_Tone - O O
752-278 RADC_Tone[Y][Patch4] 0 0 1023 RADC_Tone - O O
752-279 RADC_Tone[M][Patch1] 0 0 1023 RADC_Tone - O O
752-280 RADC_Tone[M][Patch2] 0 0 1023 RADC_Tone - O O
752-281 RADC_Tone[M][Patch3] 0 0 1023 RADC_Tone - O O
752-282 RADC_Tone[M][Patch4] 0 0 1023 RADC_Tone - O O
752-283 RADC_Tone[C][Patch1] 0 0 1023 RADC_Tone - O O
752-284 RADC_Tone[C][Patch2] 0 0 1023 RADC_Tone - O O
752-285 RADC_Tone[C][Patch3] 0 0 1023 RADC_Tone - O O
752-286 RADC_Tone[C][Patch4] 0 0 1023 RADC_Tone - O O
752-287 RADC_Tone[K][Patch1] 0 0 1023 RADC_Tone - O O
752-288 RADC_Tone[K][Patch2] 0 0 1023 RADC_Tone - O O
752-289 RADC_Tone[K][Patch3] 0 0 1023 RADC_Tone - O O
752-290 RADC_Tone[K][Patch4] 0 0 1023 RADC_Tone - O O
752-291 RADC_TC[Y] 0 0 1023 RADC_TC Value - O O
752-292 RADC_TC[M] 0 0 1023 RADC_TC Value - O O

Version 1.1 05/2014 6.3.13 NVM 752_Process Control 1 List

6-105
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-106 6.3.13 NVM 752_Process Control 1 List
Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-293 RADC_TC[C] 0 0 1023 RADC_TC Value - O O
752-294 RADC_TC[K] 0 0 1023 RADC_TC Value - O O
752-295 ADC_Potential_Cin[Y] 148 0 255 ADC_Potential_Patch Cin - O O
752-296 ADC_Potential_Cin[M] 148 0 255 ADC_Potential_Patch Cin - O O
752-297 ADC_Potential_Cin[C] 148 0 255 ADC_Potential_Patch Cin - O O
752-298 ADC_Potential_Cin[K] 148 0 255 ADC_Potential_Patch Cin - O O
752-299 ADC_Tone_Cin[Y][Patch1] 36 0 255 ADC_Tone_Patch Cin - O O
752-300 ADC_Tone_Cin[Y][Patch2] 76 0 255 ADC_Tone_Patch Cin - O O
752-301 ADC_Tone_Cin[Y][Patch3] 112 0 255 ADC_Tone_Patch Cin - O O
752-302 ADC_Tone_Cin[Y][Patch4] 148 0 255 ADC_Tone_Patch Cin - O O
752-303 ADC_Tone_Cin[M][Patch1] 36 0 255 ADC_Tone_Patch Cin - O O
752-304 ADC_Tone_Cin[M][Patch2] 76 0 255 ADC_Tone_Patch Cin - O O
752-305 ADC_Tone_Cin[M][Patch3] 112 0 255 ADC_Tone_Patch Cin - O O
752-306 ADC_Tone_Cin[M][Patch4] 148 0 255 ADC_Tone_Patch Cin - O O
752-307 ADC_Tone_Cin[C][Patch1] 36 0 255 ADC_Tone_Patch Cin - O O
752-308 ADC_Tone_Cin[C][Patch2] 76 0 255 ADC_Tone_Patch Cin - O O
752-309 ADC_Tone_Cin[C][Patch3] 112 0 255 ADC_Tone_Patch Cin - O O
752-310 ADC_Tone_Cin[C][Patch4] 148 0 255 ADC_Tone_Patch Cin - O O
752-311 ADC_Tone_Cin[K][Patch1] 36 0 255 ADC_Tone_Patch Cin - O O
752-312 ADC_Tone_Cin[K][Patch2] 76 0 255 ADC_Tone_Patch Cin - O O
752-313 ADC_Tone_Cin[K][Patch3] 112 0 255 ADC_Tone_Patch Cin - O O
752-314 ADC_Tone_Cin[K][Patch4] 148 0 255 ADC_Tone_Patch Cin - O O
752-315 ADC_TC_Cin[Y] 128 0 255 ADC_TC_Patch Cin - O O
752-316 ADC_TC_Cin[M] 128 0 255 ADC_TC_Patch Cin - O O
752-317 ADC_TC_Cin[C] 128 0 255 ADC_TC_Patch Cin - O O
752-318 ADC_TC_Cin[K] 128 0 255 ADC_TC_Patch Cin - O O
752-319 ADC_Vcln_Block Minimum Value 0 0 1023 Minimum Value of ADC_Vcln belt 1 Lap - O O
752-320 ADC_Vcln_Block Maximum Value 0 0 1023 Maximum Value of ADC_Vcln Belt 1 Lap - O O
752-322 ADC_Potential_Mini1_Vpatch[Y] 0 0 1023 ADC_Potential_Mini1 Patch Output - O O
752-323 ADC_Potential_Mini1_Vpatch[M] 0 0 1023 ADC_Potential_Mini1 Patch Output - O O
752-324 ADC_Potential_Mini1_Vpatch[C] 0 0 1023 ADC_Potential_Mini1 Patch Output - O O
752-325 ADC_Potential_Mini1_Vpatch[K] 0 0 1023 ADC_Potential_Mini1 Patch Output - O O
752-326 ADC_Potential_Mini2_Vpatch[Y] 0 0 1023 ADC_Potential_Mini2 Patch Output - O O
752-327 ADC_Potential_Mini2_Vpatch[M] 0 0 1023 ADC_Potential_Mini2 Patch Output - O O
752-328 ADC_Potential_Mini2_Vpatch[C] 0 0 1023 ADC_Potential_Mini2 Patch Output - O O
752-329 ADC_Potential_Mini2_Vpatch[K] 0 0 1023 ADC_Potential_Mini2 Patch Output - O O
752-330 ADC_Potential_Vpatch[Y] 0 0 1023 ADC_Potential Patch Output - O O
752-331 ADC_Potential_Vpatch[M] 0 0 1023 ADC_Potential Patch Output - O O
 Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-332 ADC_Potential_Vpatch[C] 0 0 1023 ADC_Potential Patch Output - O O
752-333 ADC_Potential_Vpatch[K] 0 0 1023 ADC_Potential Patch Output - O O
752-334 ADC_Tone_Vpatch[Y][Patch1] 0 0 1023 ADC_Tone Patch Output - O O
752-335 ADC_Tone_Vpatch[Y][Patch2] 0 0 1023 ADC_Tone Patch Output - O O
752-336 ADC_Tone_Vpatch[Y][Patch3] 0 0 1023 ADC_Tone Patch Output - O O
752-337 ADC_Tone_Vpatch[Y][Patch4] 0 0 1023 ADC_Tone Patch Output - O O
752-338 ADC_Tone_Vpatch[M][Patch1] 0 0 1023 ADC_Tone Patch Output - O O
752-339 ADC_Tone_Vpatch[M][Patch2] 0 0 1023 ADC_Tone Patch Output - O O
752-340 ADC_Tone_Vpatch[M][Patch3] 0 0 1023 ADC_Tone Patch Output - O O
752-341 ADC_Tone_Vpatch[M][Patch4] 0 0 1023 ADC_Tone Patch Output - O O
752-342 ADC_Tone_Vpatch[M][Patch1] 0 0 1023 ADC_Tone Patch Output - O O
752-343 ADC_Tone_Vpatch[M][Patch2] 0 0 1023 ADC_Tone Patch Output - O O
752-344 ADC_Tone_Vpatch[M][Patch3] 0 0 1023 ADC_Tone Patch Output - O O
752-345 ADC_Tone_Vpatch[M][Patch4] 0 0 1023 ADC_Tone Patch Output - O O
752-346 ADC_Tone_Vpatch[K][Patch1] 0 0 1023 ADC_Tone Patch Output - O O
752-347 ADC_Tone_Vpatch[K][Patch2] 0 0 1023 ADC_Tone Patch Output - O O
752-348 ADC_Tone_Vpatch[K][Patch3] 0 0 1023 ADC_Tone Patch Output - O O
752-349 ADC_Tone_Vpatch[K][Patch4] 0 0 1023 ADC_Tone Patch Output - O O
752-350 ADC_TC_Vpatch[Y] 0 0 1023 ADC_TC Patch output - O O
752-351 ADC_TC_Vpatch[M] 0 0 1023 ADC_TC Patch output - O O
752-352 ADC_TC_Vpatch[C] 0 0 1023 ADC_TC Patch output - O O
752-353 ADC_TC_Vpatch[K] 0 0 1023 ADC_TC Patch output - O O
752-354 Delta RADC_Potential[Y] 0 -1024 1023 Delta RADC_Potential Value - O O
752-355 Delta RADC_Potential[M] 0 -1024 1023 Delta RADC_Potential Value - O O
752-356 Delta RADC_Potential[C] 0 -1024 1023 Delta RADC_Potential Value - O O
752-357 Delta RADC_Potential[K] 0 -1024 1023 Delta RADC_Potential Value - O O
752-358 Delta RADC_Tone[Y][Patch1] 0 -1024 1023 Delta RADC_Tone Value - O O
752-359 Delta RADC_Tone[Y][Patch2] 0 -1024 1023 Delta RADC_Tone Value - O O
752-360 Delta RADC_Tone[Y][Patch3] 0 -1024 1023 Delta RADC_Tone Value - O O
752-361 Delta RADC_Tone[Y][Patch4] 0 -1024 1023 Delta RADC_Tone Value - O O
752-362 Delta RADC_Tone[M][Patch1] 0 -1024 1023 Delta RADC_Tone Value - O O
752-363 Delta RADC_Tone[M][Patch2] 0 -1024 1023 Delta RADC_Tone Value - O O
752-364 Delta RADC_Tone[M][Patch3] 0 -1024 1023 Delta RADC_Tone Value - O O
752-365 Delta RADC_Tone[M][Patch4] 0 -1024 1023 Delta RADC_Tone Value - O O
752-366 Delta RADC_Tone[C][Patch1] 0 -1024 1023 Delta RADC_Tone Value - O O
752-367 Delta RADC_Tone[C][Patch2] 0 -1024 1023 Delta RADC_Tone Value - O O
752-368 Delta RADC_Tone[C][Patch3] 0 -1024 1023 Delta RADC_Tone Value - O O
752-369 Delta RADC_Tone[C][Patch4] 0 -1024 1023 Delta RADC_Tone Value - O O

Version 1.1 05/2014 6.3.13 NVM 752_Process Control 1 List

6-107
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-108 6.3.13 NVM 752_Process Control 1 List
Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-370 Delta RADC_Tone [K][Patch1] 0 -1024 1023 Delta RADC_Tone Value - O O
752-371 Delta RADC_Tone[K][Patch2] 0 -1024 1023 Delta RADC_Tone Value - O O
752-372 Delta RADC_Tone[K][Patch3] 0 -1024 1023 Delta RADC_Tone Value - O O
752-373 Delta RADC_Tone[K][Patch4] 0 -1024 1023 Delta RADC_Tone Value - O O
752-374 Delta RADC_TC[Y] 0 -1024 1023 Delta RADC_TC Value - O O
752-375 Delta RADC_TC[M] 0 -1024 1023 Delta RADC_TC Value - O O
752-376 Delta RADC_TC[C] 0 -1024 1023 Delta RADC_TC Value - O O
752-377 Delta RADC_TC[K] 0 -1024 1023 Delta RADC_TC Value - O O
752-378 Delta RADC_Potential_Target Manual Correction 0 -1024 1023 Manual Correction Amount of RADC_Potential_Standard Target - O O
Amount[Y] Value
752-379 Delta RADC_Potential_Target Manual Correction 0 -1024 1023 Manual Correction Amount of RADC_Potential_Standard Target - O O
Amount[M] Value
752-380 Delta RADC_Potential_Target Manual Correction 0 -1024 1023 Manual Correction Amount of RADC_Potential_Standard Target - O O
Amount[C] Value
752-381 Delta RADC_Potential_Target Manual Correction 0 -1024 1023 Manual Correction Amount of RADC_Potential_Standard Target - O O
Amount[K] Value
752-382 Delta RADC_Tone_Target Manual Correction Amount 0 -1024 1023 Manual Correction Amount of RADC_Tone_Standard Target Value - O O
[Y][Patch1]
752-383 Delta RADC_Tone_Target Manual Correction Amount 0 -1024 1023 Manual Correction Amount of RADC_Tone_Standard Target Value - O O
[Y][Patch2]
752-384 Delta RADC_Tone_Target Manual Correction Amount 0 -1024 1023 Manual Correction Amount of RADC_Tone_Standard Target Value - O O
[Y][Patch3]
752-385 Delta RADC_Tone_Target Manual Correction Amount 0 -1024 1023 Manual Correction Amount of RADC_Tone_Standard Target Value - O O
[Y][Patch4]
752-386 Delta RADC_Tone_Target Manual Correction Amount 0 -1024 1023 Manual Correction Amount of RADC_Tone_Standard Target Value - O O
[M][Patch1]
752-387 Delta RADC_Tone_Target Manual Correction Amount 0 -1024 1023 Manual Correction Amount of RADC_Tone_Standard Target Value - O O
[M][Patch2]
752-388 Delta RADC_Tone_Target Manual Correction Amount 0 -1024 1023 Manual Correction Amount of RADC_Tone_Standard Target Value - O O
[M][Patch3]
752-389 Delta RADC_Tone_Target Manual Correction Amount 0 -1024 1023 Manual Correction Amount of RADC_Tone_Standard Target Value - O O
[M][Patch4]
752-390 Delta RADC_Tone_Target Manual Correction Amount 0 -1024 1023 Manual Correction Amount of RADC_Tone_Standard Target Value - O O
[C][Patch1]
752-391 Delta RADC_Tone_Target Manual Correction Amount 0 -1024 1023 Manual Correction Amount of RADC_Tone_Standard Target Value - O O
[C][Patch2]
752-392 Delta RADC_Tone_Target Manual Correction Amount 0 -1024 1023 Manual Correction Amount of RADC_Tone_Standard Target Value - O O
[C][Patch3]
752-393 Delta RADC_Tone_Target Manual Correction Amount 0 -1024 1023 Manual Correction Amount of RADC_Tone_Standard Target Value - O O
[C][Patch4]
 Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-394 Delta RADC_Tone_Target Manual Correction Amount 0 -1024 1023 Manual Correction Amount of RADC_Tone_Standard Target Value - O O
[K][Patch1]
752-395 Delta RADC_Tone_Target Manual Correction Amount 0 -1024 1023 Manual Correction Amount of RADC_Tone_Standard Target Value - O O
[K][Patch2]
752-396 Delta RADC_Tone_Target Manual Correction Amount 0 -1024 1023 Manual Correction Amount of RADC_Tone_Standard Target Value - O O
[K][Patch3]
752-397 Delta RADC_Tone_Target Manual Correction Amount 0 -1024 1023 Manual Correction Amount of RADC_Tone_Standard Target Value - O O
[K][Patch4]
752-398 Delta RADC_TC_Target Manual Correction Amount [Y] 0 -1024 1023 The manual Correction amount for RADC_TC Reference Target - O O
Value
752-399 Delta RADC_TC Target Manual Correction Amount [M] 0 -1024 1023 The manual Correction amount for RADC_TC Reference Target - O O
Value
752-400 Delta RADC_TC_Target Manual Correction Amount [C] 0 -1024 1023 The manual Correction amount for RADC_TC Reference Target - O O
Value
752-401 Delta RADC_TC_Target Manual Correction Amount [K] 0 -1024 1023 The manual Correction amount for RADC_TC Reference Target - O O
Value
752-402 Delta RADC_Potential_Target Manual Correction 0 -128 127 Environment Correction Amount of Potential Control RADC Refer- - O O
Amount[YMC] ence Target Value
752-403 Delta RADC_Potential_Target Manual Correction 0 -128 127 Environment Correction Amount of Potential Control RADC Refer- - O O
Amount[K] ence Target Value
752-404 Delta RADC_Potential_Target PR Correction Amount [Y] 0 -1024 1023 Delta RADC_Potential_PR Degradation Correction Amount of Target - O O
Value
752-405 Delta RADC_Potential_Target PR Correction Amount [M] 0 -1024 1023 Delta RADC_Potential_PR Degradation Correction Amount of Target - O O
Value
752-406 Delta RADC_Potential_Target PR Correction Amount [C] 0 -1024 1023 Delta RADC_Potential_PR Degradation Correction Amount of Target - O O
Value
752-407 Delta RADC_Potential_Target PR Correction Amount [K] 0 -1024 1023 Delta RADC_Potential_PR Degradation Correction Amount of Target - O O
Value
752-408 Delta RADC_Tone_Target Environment Correction 0 -128 127 Environment Correction Amount of Tone Control RADC Reference - O O
Amount [YMC][Patch1] Target Value
752-409 Delta RADC_Tone_Target Environment Correction 0 -128 127 Environment Correction Amount of Tone Control RADC Reference - O O
Amount [YMC][Patch2] Target Value
752-410 Delta RADC_Tone_Target Environment Correction 0 -128 127 Environment Correction Amount of Tone Control RADC Reference - O O
Amount [YMC][Patch3] Target Value
752-411 Delta RADC_Tone_Target Environment Correction 0 -128 127 Environment Correction Amount of Tone Control RADC Reference - O O
Amount [YMC][Patch4] Target Value
752-412 Delta RADC_Tone_Target Environment Correction 0 -128 127 Environment Correction Amount of Tone Control RADC Reference - O O
Amount [K][Patch1] Target Value
752-413 Delta RADC_Tone_Target Environment Correction 0 -128 127 Environment Correction Amount of Tone Control RADC Reference - O O
Amount [K][Patch2] Target Value

Version 1.1 05/2014 6.3.13 NVM 752_Process Control 1 List

6-109
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-110 6.3.13 NVM 752_Process Control 1 List
Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-414 Delta RADC_Tone_Target Environment Correction 0 -128 127 Environment Correction Amount of Tone Control RADC Reference - O O
Amount [K][Patch3] Target Value
752-415 Delta RADC_Tone_Target Environment Correction 0 -128 127 Environment Correction Amount of Tone Control RADC Reference - O O
Amount [K][Patch4] Target Value
752-416 Delta RADC_TC_Target Environment Correction Amount 0 -128 127 Environment Correction Amount of TC Control RADC Reference Tar- - O O
[YMC] get Value
752-417 Delta RADC_TC_Target Environment Correction Amount 0 -128 127 Environment Correction Amount of TC Control RADC Reference Tar- - O O
[K] get Value
752-418 Delta RADC_TC_Target Environment OpeTC Correction 0 -1024 1023 Environment OpeTC Correction Amount of TC Control RADC Refer- - O O
Amount [YMC] ence Target Value
752-419 Delta RADC_TC_Target Environment OpeTC Correction 0 -1024 1023 Environment OpeTC Correction Amount of TC Control RADC Refer- - O O
Amount [K] ence Target Value
752-420 Delta RADC_TC_Target Deve Correction Amount [Y] 0 -1024 1023 Deve Degradation Correction Amount of Delta RADC_TC_Target - O O
Value[Y]
752-421 Delta RADC_TC_Target Deve Correction Amount [M] 0 -1024 1023 Deve Degradation Correction Amount of Delta RADC_TC_Target - O O
Value[Y]
752-422 Delta RADC_TC_Target Deve Correction Amount [C] 0 -1024 1023 Deve Degradation Correction Amount of Delta RADC_TC_Target - O O
Value[Y]
752-423 Delta RADC_TC_Target Deve Correction Amount [K] 0 -1024 1023 Deve Degradation Correction Amount of Delta RADC_TC_Target - O O
Value[Y]
752-424 Delta RADC_TC_Target PR Correction Amount [Y] 0 -1024 1023 PR Degradation Correction Amount of Delta RADC_TC_Target - O O
Value[Y]
752-425 Delta RADC_TC_Target PR Correction Amount [M] 0 -1024 1023 PR Degradation Correction Amount of Delta RADC_TC_Target - O O
Value[Y]
752-426 Delta RADC_TC_Target PR Correction Amount [C] 0 -1024 1023 PR Degradation Correction Amount of Delta RADC_TC_Target - O O
Value[Y]
752-427 Delta RADC_TC_Target PR Correction Amount [K] 0 -1024 1023 PR Degradation Correction Amount of Delta RADC_TC_Target - O O
Value[Y]
752-428 ADC Patch SS Start Timing[PS0] 88 -128 127 ADC Patch SS Direction Start Timing ms O O
752-429 ADC Patch SS Start Timing[PS1] 44 -128 127 ADC Patch SS Direction Start Timing ms O O
752-430 ADC Sensor Warning Counter 0 0 65535 ADC Sensor Warning Counter - O O
752-431 ADC Sensor System Fail 0 0 255 ADC Sensor System Fail - O O
752-432 ADC_Vdark_Fail Upper Limit Value 100 0 1023 ADC Dark Current Fail Upper Limit Value - O O
752-433 ADC_Vcln_Fail Lower Limit Value_All Mean Value 50 0 1023 ADC_Vcln_Fail Lower Limit Value_All Mean Value - O O
752-434 ADC_Vcln_Fail Upper Limit Value_All Mean Value 1000 0 1023 ADC_Vcln_Fail Upper Limit Value_All Mean Value - O O
752-435 ADC_Vcln_Fail Lower Limit Value_Patch Area 50 0 1023 ADC_Vcln_Fail Lower Limit Value_Patch Area - O O
752-436 ADC_Vcln_Fail Upper Limit Value_Patch Area 1000 0 1023 ADC_Vcln_Fail Upper Limit Value_Patch Area - O O
752-437 RADC_Potential_Mini reverse Rotation Threshold 0 0 1023 Mini1,2 RADC Difference Threshold Value - O O
Value[Y]
752-438 RADC_Potential_Mini reverse Rotation Threshold 0 0 1023 Mini1,2 RADC Difference Threshold Value - O O
Value[M]
 Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-439 RADC_Potential_Mini reverse Rotation Threshold 0 0 1023 Mini1,2 RADC Difference Threshold Value - O O
Value[C]
752-440 RADC_Potential_Mini reverse Rotation Threshold 0 0 1023 Mini1,2 RADC Difference Threshold Value - O O
Value[K]
752-441 RADC_Potential_Mini2 Saturation Determination Thresh- 1023 0 1023 RADC_Potential_Mini2 Saturation Determination Threshold Value - O O
old Value[Y]
752-442 RADC_Potential_Mini2 Saturation Determination Thresh- 1023 0 1023 RADC_Potential_Mini2 Saturation Determination Threshold Value - O O
old Value[M]
752-443 RADC_Potential_Mini2 Saturation Determination Thresh- 1023 0 1023 RADC_Potential_Mini2 Saturation Determination Threshold Value - O O
old Value[C]
752-444 RADC_Potential_Mini2 Saturation Determination Thresh- 1023 0 1023 RADC_Potential_Mini2 Saturation Determination Threshold Value - O O
old Value[K]
752-445 Delta RADC_Potential_Target Manual Correction Lower 0 0 1023 Delta RADC_Potential_Target Manual Correction Lower Limit - O O
Limit Value[K] Amount
752-446 Delta RADC_Potential_Target Manual Correction Lower 0 0 1023 Delta RADC_Potential_Target Manual Correction Lower Limit - O O
Limit Value[K] Amount
752-447 Delta RADC_Potential_Target Manual Correction Upper 0 0 1023 Delta RADC_Potential_Target Manual Correction Upper Limit - O O
Limit Value[YMC] Amount
752-448 Delta RADC_Potential_Target Manual Correction Upper 0 0 1023 Delta RADC_Potential_Target Manual Correction Upper Limit - O O
Limit Value[K] Amount
752-449 Delta RADC_Tone_Target Manual Correction Lower 0 0 1023 Delta RADC_Tone_Target Manual Correction Lower Limit Amount - O O
Limit Value[YMC][Patch1]
752-450 Delta RADC_Tone_Target Manual Correction Lower 0 0 1023 Delta RADC_Tone_Target Manual Correction Lower Limit Amount - O O
Limit Value[YMC][Patch2]
752-451 Delta RADC_Tone_Target Manual Correction Lower 0 0 1023 Delta RADC_Tone_Target Manual Correction Lower Limit Amount - O O
Limit Value[YMC][Patch3]
752-452 Delta RADC_Tone_Target Manual Correction Lower 0 0 1023 Delta RADC_Tone_Target Manual Correction Lower Limit Amount - O O
Limit Value[YMC][Patch4]
752-453 Delta RADC_Tone_Target Manual Correction Lower 0 0 1023 Delta RADC_Tone_Target Manual Correction Lower Limit Amount - O O
Limit Value[K][Patch1]
752-454 Delta RADC_Tone_Target Manual Correction Lower 0 0 1023 Delta RADC_Tone_Target Manual Correction Lower Limit Amount - O O
Limit Value[K][Patch2]
752-455 Delta RADC_Tone_Target Manual Correction Lower 0 0 1023 Delta RADC_Tone_Target Manual Correction Lower Limit Amount - O O
Limit Value[K][Patch3]
752-456 Delta RADC_Tone_Target Manual Correction Lower 0 0 1023 Delta RADC_Tone_Target Manual Correction Lower Limit Amount - O O
Limit Value[K][Patch4]
752-457 Delta RADC_Tone_Target Manual Correction Upper 0 0 1023 Delta RADC_Tone_Target Manual Correction Upper Limit Amount - O O
Limit Value [YMC][Patch1]
752-458 Delta RADC_Tone_Target Manual Correction Upper 0 0 1023 Delta RADC_Tone_Target Manual Correction Upper Limit Amount - O O
Limit Value[YMC][Patch2]

Version 1.1 05/2014 6.3.13 NVM 752_Process Control 1 List

6-111
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-112 6.3.13 NVM 752_Process Control 1 List
Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-459 Delta RADC_Tone_Target Manual Correction Upper 0 0 1023 Delta RADC_Tone_Target Manual Correction Upper Limit Amount - O O
Limit Value [YMC][Patch3]
752-460 Delta RADC_Tone_Target Manual Correction Upper 0 0 1023 Delta RADC_Tone_Target Manual Correction Upper Limit Amount - O O
Limit Value[YMC][Patch4]
752-461 Delta RADC_Tone_Target Manual Correction Upper 0 0 1023 Delta RADC_Tone_Target Manual Correction Upper Limit Amount - O O
Limit Value[K][Patch1]
752-462 Delta RADC_Tone_Target Manual Correction Upper 0 0 1023 Delta RADC_Tone_Target Manual Correction Upper Limit Amount - O O
Limit Value[K][Patch2]
752-463 Delta RADC_Tone_Target Manual Correction Upper 0 0 1023 Delta RADC_Tone_Target Manual Correction Upper Limit Amount - O O
Limit Value[K][Patch3]
752-464 Delta RADC_Tone_Target Manual Correction Upper 0 0 1023 Delta RADC_Tone_Target Manual Correction Upper Limit Amount - O O
Limit Value[K][Patch4]
752-465 Delta RADC_TC_Target Manual Correction Lower Limit 0 0 1023 Delta RADC_TC_Target Manual Correction Lower Limit Amount - O O
Value[YMC]
752-466 Delta RADC_TC_Target Manual Correction Lower Limit 0 0 1023 Delta RADC_TC_Target Manual Correction Lower Limit Amount - O O
Value[K]
752-467 Delta RADC_TC_Target Manual Correction Upper Limit 0 0 1023 Delta RADC_TC_Target Manual Correction Upper Limit Amount - O O
Value[YMC]
752-468 Delta RADC_TC_Target Manual Correction Upper Limit 0 0 1023 Delta RADC_TC_Target Manual Correction Upper Limit Amount - O O
Value[K]
752-469 Delta RADC_Potential_Target Dmax Correction Lower 0 0 1023 Delta RADC_Potential_Target Dmax Correction Lower Limit Value - O O
Limit Value[YMC]
752-470 Delta RADC_Potential_Target Dmax Correction Lower 0 0 1023 Delta RADC_Potential_Target Dmax Correction Lower Limit Value - O O
Limit Value[K]
752-471 Delta RADC_Potential_Target Dmax Correction Upper 0 0 1023 Delta RADC_Potential_Target Dmax Correction Upper Limit Value - O O
Limit Value[YMC]
752-472 Delta RADC_Potential_Target Dmax Correction Upper 0 0 1023 Delta RADC_Potential_Target Dmax Correction Upper Limit Value - O O
Limit Value
752-473 Delta RADC_TC_Target Dmax Correction Lower Limit 0 0 1023 Delta RA DC_TC_Target Dmax Correction Lower Limit Amount - O O
Value[YMC]
752-474 Delta RADC_TC_Target Dmax Correction Lower Limit 0 0 1023 Delta RA DC_TC_Target Dmax Correction Lower Limit Amount - O O
Value[K]
752-475 Delta RADC_TC_Target Dmax Correction Upper Limit 0 0 1023 Delta RA DC_TC_Target Dmax Correction Upper Limit Amount - O O
Value[YMC]
752-476 Delta RADC_TC_Target Dmax Correction Upper Limit 0 0 1023 Delta RA DC_TC_Target Dmax Correction Upper Limit Amount - O O
Value[K]
752-477 Delta RADC_TC_Target AC Correction Target Value[Y] 0 -32768 32767 Target Value of Delta RADC_TC_Target AC Correction Amount - O O
752-478 Delta RADC_TC_Target AC Correction Target Value[M] 0 -32768 32767 Target Value of Delta RADC_TC_Target AC Correction Amount - O O
752-479 Delta RADC_TC_Target AC Correction Target Value[C] 0 -32768 32767 Target Value of Delta RADC_TC_Target AC Correction Amount - O O
752-480 Delta RADC_TC_Target AC Correction Target Value[K] 0 -32768 32767 Target Value of Delta RADC_TC_Target AC Correction Amount - O O
752-481 RDP Calculation Value[Y] 0 0 65535 RDP Calculation Value - O O
 Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-482 RDP Calculation Value[M] 0 0 65535 RDP Calculation Value - O O
752-483 RDP Calculation Value[C] 0 0 65535 RDP Calculation Value - O O
752-484 RDP Calculation Value[K] 0 0 65535 RDP Calculation Value - O O
752-485 Disp Time for RDP Value Calculation[Y] 0 0 10000000 Disp Time for RDP Value Calculation - O O
752-486 Disp Time for RDP Value Calculation[M] 0 0 10000000 Disp Time for RDP Value Calculation - O O
752-487 Disp Time for RDP Value Calculation[C] 0 0 10000000 Disp Time for RDP Value Calculation - O O
752-488 Disp Time for RDP Value Calculation[K] 0 0 10000000 Disp Time for RDP Value Calculation - O O
752-489 Dmax_IIT Measurement Value[Y] 0 0 1023 IIT Measurement Value for Dmax Correction - O O
752-490 Dmax_IIT Measurement Value[M] 0 0 1023 IIT Measurement Value for Dmax Correction - O O
752-491 Dmax_IIT Measurement Value[C] 0 0 1023 IIT Measurement Value for Dmax Correction - O O
752-492 Dmax_IIT Measurement Value[K] 0 0 1023 IIT Measurement Value for Dmax Correction - O O
752-493 Dmax_IIT Target Value[Y] 0 0 1023 IIT Target Value for Dmax Correction - O O
752-494 Dmax_IIT Target Value[M] 0 0 1023 IIT Target Value for Dmax Correction - O O
752-495 Dmax_IIT Target Value[C] 0 0 1023 IIT Target Value for Dmax Correction - O O
752-496 Dmax_IIT Target Value[K] 0 0 1023 IIT Target Value for Dmax Correction - O O
752-498 Disp Request Time_ICDC[Y] 0 0 32767 Toner Refill Request Time from ICDC Control 1 [ms] O O
752-499 Disp Request Time_ICDC[M] 0 0 32767 Toner Refill Request Time from ICDC Control 1 [ms] O O
752-500 Disp Request Time_ICDC[C] 0 0 32767 Toner Refill Request Time from ICDC Control 1 [ms] O O
752-501 Disp Request Time_ICDC[K] 0 0 32767 Toner Refill Request Time from ICDC Control 1 [ms] O O
752-502 Disp Request Time_Timer [Y] 84 0 10000 Toner Refill Request Time from Timer Control 1 [ms] O O
752-503 Disp Request Time_Timer [M] 90 0 10000 Toner Refill Request Time from Timer Control 1 [ms] O O
752-504 Disp Request Time_Timer [C] 84 0 10000 Toner Refill Request Time from Timer Control 1 [ms] O O
752-505 Disp Request Time_Timer [K] 94 0 10000 Toner Refill Request Time from Timer Control 1 [ms] O O
752-506 Toner Band Disp Request Time [Y] 0 0 32767 Toner Band ICDC Disp Time 1 [ms] O O
752-507 Toner Band Disp Request Time [M] 0 0 32767 Toner Band ICDC Disp Time 1 [ms] O O
752-508 Toner Band Disp Request Time [C] 0 0 32767 Toner Band ICDC Disp Time 1 [ms] O O
752-509 Toner Band Disp Request Time [K] 0 0 32767 Toner Band ICDC Disp Time 1 [ms] O O
752-514 ICDC Coefficient_H[Y] 155 0 65535 High AC ICDC Coefficient - O O
752-515 ICDC Coefficient_H[M] 167 0 65535 High AC ICDC Coefficient - O O
752-516 ICDC Coefficient_H[C] 155 0 65535 High AC ICDC Coefficient - O O
752-517 ICDC Coefficient_H[K] 174 0 65535 High AC ICDC Coefficient - O O
752-518 ICDC Coefficient_L[Y] 155 0 65535 Low AC ICDC Coefficient - O O
752-519 ICDC Coefficient_L[M] 167 0 65535 Low AC ICDC Coefficient - O O
752-520 ICDC Coefficient_L[C] 155 0 65535 Low AC ICDC Coefficient - O O
752-521 ICDC Coefficient_L[K] 174 0 65535 Low AC ICDC Coefficient - O O
752-522 Delta TC Threshold Value_Recovery [Positive][YMC] 21 0 1023 Toner Recovery delta RADC_TC Threshold Value - O O
752-523 Delta TC Threshold Value_Recovery [Positive][K] 21 0 1023 Toner Recovery delta RADC_TC Threshold Value - O O
752-524 Delta TC Threshold Value_Recovery [Positive][YMC] 21 0 1023 Toner Recovery delta RADC_TC Threshold Value - O O

Version 1.1 05/2014 6.3.13 NVM 752_Process Control 1 List

6-113
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-114 6.3.13 NVM 752_Process Control 1 List
Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-525 Delta TC Threshold Value_Recovery [Negative][K] 21 0 1023 Toner Recovery delta RADC_TC Threshold Value - O O
752-526 PCON_Disp Coefficient [Positive][YMC] 1882 0 65535 PCON_Disp Coefficient - O O
752-527 PCON_Disp Coefficient [Positive][K] 1882 0 65535 PCON_Disp Coefficient - O O
752-528 PCON_Disp Coefficient [Negative][YMC] 3010 0 65535 PCON_Disp Coefficient - O O
752-529 PCON_Disp Coefficient [Negative][K] 3010 0 65535 PCON_Disp Coefficient - O O
752-530 PCON_Disp Offset [Positive][YMC] 0 0 65535 PCON_Disp Offset Time - O O
752-531 PCON_Disp Offset [Positive][K] 0 0 65535 PCON_Disp Offset Time - O O
752-532 PCON_Disp Offset [Negative][YMC] 0 0 65535 PCON_Disp Offset Time - O O
752-533 PCON_Disp Offset [Negative][K] 0 0 65535 PCON_Disp Offset Time - O O
752-534 PCON_Disp Upper Limit [Y] 13171 0 200000 PCON_Disp Upper Limit Value 1 [ms] O O
752-535 PCON_Disp Upper Limit [M] 13171 0 200000 PCON_Disp Upper Limit Value 1 [ms] O O
752-536 PCON_Disp Upper Limit [C] 13171 0 200000 PCON_Disp Upper Limit Value 1 [ms] O O
752-537 PCON_Disp Upper Limit [K] 13171 0 200000 PCON_Disp Upper Limit Value 1 [ms] O O
752-538 PCON_Disp Correction Coefficient [Y] 128 0 128 Correction Coefficient for PCON_Disp Correction - O O
752-539 PCON_Disp Correction Coefficient [M] 128 0 128 Correction Coefficient for PCON_Disp Correction - O O
752-540 PCON_Disp Correction Coefficient [C] 128 0 128 Correction Coefficient for PCON_Disp Correction - O O
752-541 PCON_Disp Correction Coefficient [K] 128 0 128 Correction Coefficient for PCON_Disp Correction - O O
752-550 EMP Determination ICDC Threshold Value_Job[Y] 27 0 4294967295 Empty Determination ICDC Threshold Value during Job - O O
752-551 EMP Determination ICDC Threshold Value_Job[M] 25 0 4294967295 Empty Determination ICDC Threshold Value during Job - O O
752-552 EMP Determination ICDC Threshold Value_Job[C] 27 0 4294967295 Empty Determination ICDC Threshold Value during Job - O O
752-553 EMP Determination ICDC Threshold Value_Job[K] 24 0 4294967295 Empty Determination ICDC Threshold Value during Job - O O
752-554 EMP Determination PV Threshold Value_Job[Y] 108 0 65535 Empty Determination PV Threshold Value during Job - O O
752-555 EMP Determination PV Threshold Value_Job[M] 100 0 65535 Empty Determination PV Threshold Value during Job - O O
752-556 EMP Determination PV Threshold Value_Job[C] 108 0 65535 Empty Determination PV Threshold Value during Job - O O
752-557 EMP Determination PV Threshold Value_Job[K] 96 0 65535 Empty Determination PV Threshold Value during Job - O O
752-558 Delta RADC_TC_Near Determination Threshold -42 -1024 1023 NearEmpty Release Determination Threshold Value of TC Patch - O O
Value1[Y]
752-559 Delta RADC_TC_Near Determination Threshold -42 -1024 1023 NearEmpty Release Determination Threshold Value of TC Patch - O O
Value1[M]
752-560 Delta RADC_TC_Near Determination Threshold -42 -1024 1023 NearEmpty Release Determination Threshold Value of TC Patch - O O
Value1[C]
752-561 Delta RADC_TC_Near Determination Threshold -42 -1024 1023 NearEmpty Release Determination Threshold Value of TC Patch - O O
Value1[K]
752-562 Delta RADC_TC_Near Determination Threshold 3 -1024 1023 NearEmpty Release Determination Threshold Value of TC Patch - O O
Value2[Y]
752-563 Delta RADC_TC_Near Determination Threshold 3 -1024 1023 NearEmpty Release Determination Threshold Value of TC Patch - O O
Value2[M]
752-564 Delta RADC_TC_Near Determination Threshold 3 -1024 1023 NearEmpty Release Determination Threshold Value of TC Patch - O O
Value2[C]
 Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-565 Delta RADC_TC_Near Determination Threshold 3 -1024 1023 NearEmpty Release Determination Threshold Value of TC Patch - O O
Value2[K]
752-566 Delta RADC_TC_Near Determination Last Difference 28 -1024 1023 NearEmpty Release Determination Threshold Value of TC Patch - O O
Threshold Value [Y]
752-567 Delta RADC_TC_Near Determination Last Difference 28 -1024 1023 NearEmpty Release Determination Threshold Value of TC Patch - O O
Threshold Value [M]
752-568 Delta RADC_TC_Near Determination Last Difference 28 -1024 1023 NearEmpty Release Determination Threshold Value of TC Patch - O O
Threshold Value [C]
752-569 Delta RADC_TC_Near Determination Last Difference 28 -1024 1023 NearEmpty Release Determination Threshold Value of TC Patch - O O
Threshold Value [K]
752-570 RADC_TC_Empty Determination Threshold Value [Y] 1023 0 1023 Empty Determination Threshold Value of TC Patch - O O
752-571 RADC_TC_Empty Determination Threshold Value [M] 1023 0 1023 Empty Determination Threshold Value of TC Patch - O O
752-572 RADC_TC_Empty Determination Threshold Value [C] 1023 0 1023 Empty Determination Threshold Value of TC Patch - O O
752-573 RADC_TC_Empty Determination Threshold Value [K] 1023 0 1023 Empty Determination Threshold Value of TC Patch - O O
752-574 No. of ADC_Empty [Y] 0 0 1023 No. of Empty Determination by ADC - O O
752-575 No. of ADC_Empty [M] 0 0 1023 No. of Empty Determination by ADC - O O
752-576 No. of ADC_Empty [C] 0 0 1023 No. of Empty Determination by ADC - O O
752-577 No. of ADC_Empty [K] 0 0 1023 No. of Empty Determination by ADC - O O
752-578 No. of ADC_NearEmpty [Y] 0 0 1023 NearEmpty Determination count by ADC - O O
752-579 No. of ADC_NearEmpty [M] 0 0 1023 NearEmpty Determination count by ADC - O O
752-580 No. of ADC_NearEmpty[C] 0 0 1023 NearEmpty Determination count by ADC - O O
752-581 No. of ADC_NearEmpty [K] 0 0 1023 NearEmpty Determination count by ADC - O O
752-582 PreNear Correction Amount Stored Value [Y][0] 0 -128 127 History of PreNear Correction Amount (by 10) - O O
752-583 PreNear Correction Amount Stored Value [Y][1] 0 -128 127 History of PreNear Correction Amount (by 10) - O O
752-584 PreNear Correction Amount Stored Value [Y][2] 0 -128 127 History of PreNear Correction Amount (by 10) - O O
752-585 PreNear Correction Amount Stored Value [M][0] 0 -128 127 History of PreNear Correction Amount (by 10) - O O
752-586 PreNear Correction Amount Stored Value [M][1] 0 -128 127 History of PreNear Correction Amount (by 10) - O O
752-587 PreNear Correction Amount Stored Value [M][2] 0 -128 127 History of PreNear Correction Amount (by 10) - O O
752-588 PreNear Correction Amount Stored Value [C][0] 0 -128 127 History of PreNear Correction Amount (by 10) - O O
752-589 PreNear Correction Amount Stored Value [C][1] 0 -128 127 History of PreNear Correction Amount (by 10) - O O
752-590 PreNear Correction Amount Stored Value [C][2] 0 -128 127 History of PreNear Correction Amount (by 10) - O O
752-591 PreNear Correction Amount Stored Value [K][0] 0 -128 127 History of PreNear Correction Amount (by 10) - O O
752-592 PreNear Correction Amount Stored Value [K][1] 0 -128 127 History of PreNear Correction Amount (by 10) - O O
752-593 PreNear Correction Amount Stored Value [K][2] 0 -128 127 History of PreNear Correction Amount (by 10) - O O
752-594 Disp Request Time_New Recovery [Y] 0 -128 127 Initial Recovery Disp Time in NewCTRG 1[sec] O O
752-595 Disp Request Time_New Recovery [M] 0 -128 127 Initial Recovery Disp Time in NewCTRG 1[sec] O O
752-596 Disp Request Time_New Recovery [C] 0 -128 127 Initial Recovery Disp Time in NewCTRG 1[sec] O O
752-597 Disp Request Time_New Recovery [K] 0 -128 127 Initial Recovery Disp Time in NewCTRG 1[sec] O O
752-598 Disp Request Time_Old Recovery [Y] 2 -128 127 Initial Recovery Disp Time in Old CTRG 1[sec] O O

Version 1.1 05/2014 6.3.13 NVM 752_Process Control 1 List

6-115
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-116 6.3.13 NVM 752_Process Control 1 List
Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-599 Disp Request Time_Old Recovery [M] 2 -128 127 Initial Recovery Disp Time in Old CTRG 1[sec] O O
752-600 Disp Request Time_Old Recovery [C] 2 -128 127 Initial Recovery Disp Time in Old CTRG 1[sec] O O
752-601 Disp Request Time_Old Recovery [K] 2 -128 127 Initial Recovery Disp Time in Old CTRG 1[sec] O O
752-602 Disp Request Time_Recovery Installation [Y] 22 -128 127 Recovery Disp Time of Initial Setup 1[sec] O O
752-603 Disp Request Time_Recovery Installation [M] 22 -128 127 Recovery Disp Time of Initial Setup 1[sec] O O
752-604 Disp Request Time_Recovery Installation [C] 22 -128 127 Recovery Disp Time of Initial Setup 1[sec] O O
752-605 Disp Request Time_Recovery Installation [K] 22 -128 127 Recovery Disp Time of Initial Setup 1[sec] O O
752-606 Disp Request Time_Normal Recovery [Y] 20 -128 127 Recovery Disp Time when Normal 1[sec] O O
752-607 Disp Request Time_Normal Recovery [M] 20 -128 127 Recovery Disp Time when Normal 1[sec] O O
752-608 Disp Request Time_Normal Recovery [C] 20 -128 127 Recovery Disp Time when Normal 1[sec] O O
752-609 Disp Request Time_Normal Recovery [K] 20 -128 127 Recovery Disp Time when Normal 1[sec] O O
752-610 Delta RADC_TC_Recovery Determination Threshold -28 -1024 1023 Recovery Release Determination Threshold Value of TC Patch - O O
Value1[Y]
752-611 Delta RADC_TC_Recovery Determination Threshold -28 -1024 1023 Recovery Release Determination Threshold Value of TC Patch - O O
Value1[M]
752-612 Delta RADC_TC_Recovery Determination Threshold -28 -1024 1023 Recovery Release Determination Threshold Value of TC Patch - O O
Value1[C]
752-613 Delta RADC_TC_Recovery Determination Threshold -28 -1024 1023 Recovery Release Determination Threshold Value of TC Patch - O O
Value1[K]
752-614 Delta RADC_TC_Recovery Determination Threshold 3 -1024 1023 Recovery Release Determination Threshold Value of TC Patch - O O
Value2[Y]
752-615 Delta RADC_TC_Recovery Determination Threshold 3 -1024 1023 Recovery Release Determination Threshold Value of TC Patch - O O
Value2[M]
752-616 Delta RADC_TC_Recovery Determination Threshold 3 -1024 1023 Recovery Release Determination Threshold Value of TC Patch - O O
Value2[C]
752-617 Delta RADC_TC_Recovery Determination Threshold 3 -1024 1023 Recovery Release Determination Threshold Value of TC Patch - O O
Value2[K]
752-618 Delta RADC_TC_Recovery Determination Last Differ- 14 -1024 1023 Recovery Release Determination Threshold Value of TC Patch - O O
ence Threshold Value[Y]
752-619 Delta RADC_TC_Recovery Determination Last Differ- 14 -1024 1023 Recovery Release Determination Threshold Value of TC Patch - O O
ence Threshold Value[M]
752-620 Delta RADC_TC_Recovery Determination Last Differ- 14 -1024 1023 Recovery Release Determination Threshold Value of TC Patch - O O
ence Threshold Value[C]
752-621 Delta RADC_TC_Recovery Determination Last Differ- 14 -1024 1023 Recovery Release Determination Threshold Value of TC Patch - O O
ence Threshold Value[K]
752-622 Disp Request Time_Recovery Maximum Value 15000 0 200000 Maximum Disp Time of Toner Recovery 1 [ms] O O
752-623 BCR_DC_OUT_Fixed[Y][PS0] 983 0 1300 Fixed potential mode BCR_DC_OUT - O O
752-624 BCR_DC_OUT_Fixed[Y][PS1] 983 0 1300 Fixed potential mode BCR_DC_OUT - O O
752-625 BCR_DC_OUT_Fixed[M][PS0] 983 0 1300 Fixed potential mode BCR_DC_OUT - O O
752-626 BCR_DC_OUT_Fixed[M][PS1] 983 0 1300 Fixed potential mode BCR_DC_OUT - O O
 Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-627 BCR_DC_OUT_Fixed[C][PS0] 983 0 1300 Fixed potential mode BCR_DC_OUT - O O
752-628 BCR_DC_OUT_Fixed[C][PS1] 983 0 1300 Fixed potential mode BCR_DC_OUT - O O
752-629 BCR_DC_OUT_Fixed[K][PS0] 983 0 1300 Fixed potential mode BCR_DC_OUT - O O
752-630 BCR_DC_OUT_Fixed[K][PS1] 983 0 1300 Fixed potential mode BCR_DC_OUT - O O
752-631 BIAS_DC_OUT_Fixed[YMC][PS0] 290 0 1023 Fixed Potential Mode BIAS_DC_OUT - O O
752-632 BIAS_DC_OUT_Fixed[YMC][PS1] 290 0 1023 Fixed Potential Mode BIAS_DC_OUT - O O
752-633 BIAS_DC_OUT_Fixed[K][PS0] 290 0 1023 Fixed Potential Mode BIAS_DC_OUT - O O
752-634 BIAS_DC_OUT_Fixed[K][PS1] 290 0 1023 Fixed Potential Mode BIAS_DC_OUT - O O
752-635 LPH_OUT_Fixed[Y][PS0] 677 0 2046 Fixed Potential Mode LPH_OUT - O O
752-636 LPH_OUT_Fixed[Y][PS1] 677 0 2046 Fixed Potential Mode LPH_OUT - O O
752-637 LPH_OUT_Fixed[M][PS0] 677 0 2046 Fixed Potential Mode LPH_OUT - O O
752-638 LPH_OUT_Fixed[M][PS1] 677 0 2046 Fixed Potential Mode LPH_OUT - O O
752-639 LPH_OUT_Fixed[C][PS0] 677 0 2046 Fixed Potential Mode LPH_OUT - O O
752-640 LPH_OUT_Fixed[C][PS1] 677 0 2046 Fixed Potential Mode LPH_OUT - O O
752-641 LPH_OUT_Fixed[K][PS0] 677 0 2046 Fixed Potential Mode LPH_OUT - O O
752-642 LPH_OUT_Fixed[K][PS1] 677 0 2046 Fixed Potential Mode LPH_OUT - O O
752-643 BCR_DC_OUT [Y] 983 0 1300 BCR Device Control Value - O O
752-644 BCR_DC_OUT [M] 983 0 1300 BCR Device Control Value - O O
752-645 BCR_DC_OUT [C] 983 0 1300 BCR Device Control Value - O O
752-646 BCR_DC_OUT[K] 983 0 1300 BCR Device Control Value - O O
752-647 BIAS_DC_OUT[YMC] 290 0 1023 BIAS Device Control Value - O O
752-648 BIAS_DC_OUT [K] 290 0 1023 BIAS Device Control Value - O O
752-649 LPH_OUT[Y] 677 0 2046 LPH Device Control Value - O O
752-650 LPH_OUT[M] 677 0 2046 LPH Device Control Value - O O
752-651 LPH_OUT[C] 677 0 2046 LPH Device Control Value - O O
752-652 LPH_OUT[K] 677 0 2046 LPH Device Control Value - O O
752-653 Vdeve_PCON_PS[Y] 270 0 1023 PS individual PCON Potential Vdeve Value - O O
752-654 Vdeve_PCON_PS[M] 270 0 1023 PS individual PCON Potential Vdeve Value - O O
752-655 Vdeve_PCON_PS[C] 270 0 1023 PS individual PCON Potential Vdeve Value - O O
752-656 Vdeve_PCON_PS[K] 270 0 1023 PS individual PCON Potential Vdeve Value - O O
752-657 Correction Vdeve Lower Limit_PS [Y] 250 0 1023 PS individual Correction Vdeve Lower Limit Value - O O
752-658 Correction Vdeve Lower Limit_PS [M] 250 0 1023 PS individual Correction Vdeve Lower Limit Value - O O
752-659 Correction Vdeve Lower Limit_PS [C] 250 0 1023 PS individual Correction Vdeve Lower Limit Value - O O
752-660 Correction Vdeve Lower Limit_PS [K] 250 0 1023 PS individual Correction Vdeve Lower Limit Value - O O
752-661 Correction Vdeve Upper Limit_PS [Y] 390 0 1023 PS individual Correction Vdeve Upper Limit Value - O O
752-662 Correction Vdeve Upper Limit_PS [M] 390 0 1023 PS individual Correction Vdeve Upper Limit Value - O O
752-663 Correction Vdeve Upper Limit_PS [C] 390 0 1023 PS individual Correction Vdeve Upper Limit Value - O O
752-664 Correction Vdeve Upper Limit_PS [K] 390 0 1023 PS individual Correction Vdeve Upper Limit Value - O O

Version 1.1 05/2014 6.3.13 NVM 752_Process Control 1 List

6-117
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-118 6.3.13 NVM 752_Process Control 1 List
Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-665 Delta Vdeve_PCON_Standard Difference [Y] 0 -1024 1023 Difference between POCON Potential and Standard potential of - O O
Vdeve Value
752-666 Delta Vdeve_PCON_Standard Difference[M] 0 -1024 1023 Difference between POCON Potential and Standard potential of - O O
Vdeve Value
752-667 Delta Vdeve_PCON_Standard Difference[C] 0 -1024 1023 Difference between POCON Potential and Standard potential of - O O
Vdeve Value
752-668 Delta Vdeve_PCON_Standard Difference[K] 0 -1024 1023 Difference between POCON Potential and Standard potential of - O O
Vdeve Value
752-669 VL_PCON [Y] 20 0 1023 PCON potential VL value - O O
752-670 VL_PCON [M] 20 0 1023 PCON potential VL value - O O
752-671 VL_PCON [C] 20 0 1023 PCON potential VL value - O O
752-672 VL_PCON [K] 20 0 1023 PCON potential VL value - O O
752-673 RP_PCON[Y] 20 0 1023 PCON potential RP value - O O
752-674 RP_PCON[M] 20 0 1023 PCON potential RP value - O O
752-675 RP_PCON[C] 20 0 1023 PCON potential RP value - O O
752-676 RP_PCON[K] 20 0 1023 PCON potential RP value - O O
752-677 BCR_DC_OUT_PCON [Y] 983 0 1300 PCON potential BCR_DC_OUT - O O
752-678 BCR_DC_OUT_PCON [M] 983 0 1300 PCON potential BCR_DC_OUT - O O
752-679 BCR_DC_OUT_PCON [C] 983 0 1300 PCON potential BCR_DC_OUT - O O
752-680 BCR_DC_OUT_PCON[K] 983 0 1300 PCON potential BCR_DC_OUT - O O
752-681 BCR_DC_OUT_PCON_Altitude Correction by Type [Y] 983 0 1300 PCON Potential BCR_DC_OUT after Altitude Correction by type - O O
752-682 BCR_DC_OUT_PCON_Altitude Correction by Type [M] 983 0 1300 PCON Potential BCR_DC_OUT after Altitude Correction by type - O O
752-683 BCR_DC_OUT_PCON_Altitude Correction by Type [C] 983 0 1300 PCON Potential BCR_DC_OUT after Altitude Correction by type - O O
752-684 BCR_DC_OUT_PCON_Altitude Correction by Type[K] 983 0 1300 PCON Potential BCR_DC_OUT after Altitude Correction by type - O O
752-685 BIAS_DC_OUT_PCON[YMC] 290 0 1023 PCON potential BIAS_DC_OUT - O O
752-686 BIAS_DC_OUT_PCON [K] 290 0 1023 PCON potential BIAS_DC_OUT - O O
752-687 LPH_OUT_PCON[Y] 677 0 2046 PCON Potential LPH_OUT - O O
752-688 LPH_OUT_PCON[M] 677 0 2046 PCON Potential LPH_OUT - O O
752-689 LPH_OUT_PCON[C] 677 0 2046 PCON Potential LPH_OUT - O O
752-690 LPH_OUT_PCON[K] 677 0 2046 PCON Potential LPH_OUT - O O
752-691 Contrast Ratio_Standard[Y] 314 1 65535 Standard Potential Contrast Ratio - O O
752-692 Contrast Ratio_Standard[M] 314 1 65535 Standard Potential Contrast Ratio - O O
752-693 Contrast Ratio_Standard[C] 314 1 65535 Standard Potential Contrast Ratio - O O
752-694 Contrast Ratio_Standard[K] 314 1 65535 Standard Potential Contrast Ratio - O O
752-695 VH_Standard[Y] 400 0 1023 Standard Potential VH Value - O O
752-696 VH_Standard[M] 400 0 1023 Standard Potential VH Value - O O
752-697 VH_Standard[C] 400 0 1023 Standard Potential VH Value - O O
752-698 VH_Standard[K] 400 0 1023 Standard Potential VH Value - O O
752-699 BCR_DC_OUT_Standard[Y] 983 0 1300 Standard Potential BCR_DC_OUT - O O
 Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-700 BCR_DC_OUT_Standard[M] 983 0 1300 Standard Potential BCR_DC_OUT - O O
752-701 BCR_DC_OUT_Standard[C] 983 0 1300 Standard Potential BCR_DC_OUT - O O
752-702 BCR_DC_OUT_Standard[K] 983 0 1300 Standard Potential BCR_DC_OUT - O O
752-703 BCR_DC_OUT_Standard_Altitude Correction by Type[Y] 983 0 1300 Standard Potential BCR_DC_OUT after Altitude Correction by Type - O O
752-704 BCR_DC_OUT_Standard_Altitude Correction by 983 0 1300 Standard Potential BCR_DC_OUT after Altitude Correction by Type - O O
Type[M]
752-705 BCR_DC_OUT_Standard_Altitude Correction by Type[C] 983 0 1300 Standard Potential BCR_DC_OUT after Altitude Correction by Type - O O
752-706 BCR_DC_OUT_Standard_Altitude Correction by Type[K] 983 0 1300 Standard Potential BCR_DC_OUT after Altitude Correction by Type - O O
752-707 LPH_OUT_Standard[Y] 677 0 2046 Standard Potential LPH_OUT - O O
752-708 LPH_OUT_Standard[M] 677 0 2046 Standard Potential LPH_OUT - O O
752-709 LPH_OUT_Standard[C] 677 0 2046 Standard Potential LPH_OUT - O O
752-710 LPH_OUT_Standard[K] 677 0 2046 Standard Potential LPH_OUT - O O
752-711 Vdeve_Mini1_PS[Y] 270 0 1023 PS individual Mini1 Patch Vdeve Value - O O
752-712 Vdeve_Mini1_PS[M] 270 0 1023 PS individual Mini1 Patch Vdeve Value - O O
752-713 Vdeve_Mini1_PS[C] 270 0 1023 PS individual Mini1 Patch Vdeve Value - O O
752-714 Vdeve_Mini1_PS[K] 270 0 1023 PS individual Mini1 Patch Vdeve Value - O O
752-715 Vdeve_Mini2_PS[Y] 270 0 1023 PS individual Mini2 Patch Vdeve Value - O O
752-716 Vdeve_Mini2_PS[M] 270 0 1023 PS individual Mini2 Patch Vdeve Value - O O
752-717 Vdeve_Mini2_PS[C] 270 0 1023 PS individual Mini2 Patch Vdeve Value - O O
752-718 Vdeve_Mini2_PS[K] 270 0 1023 PS individual Mini2 Patch Vdeve Value - O O
752-719 CF_Mini1_PS[Y] 110 1 1023 PS individual Mini1 Patch CF Value - O O
752-720 CF_Mini1_PS[M] 110 1 1023 PS individual Mini1 Patch CF Value - O O
752-721 CF_Mini1_PS[C] 110 1 1023 PS individual Mini1 Patch CF Value - O O
752-722 CF_Mini1_PS[K] 110 1 1023 PS individual Mini1 Patch CF Value - O O
752-723 CF_Mini2_PS[Y] 110 1 1023 PS individual Mini2 Patch CF Value - O O
752-724 CF_Mini2_PS[M] 110 1 1023 PS individual Mini2 Patch CF Value - O O
752-725 CF_Mini2_PS[C] 110 1 1023 PS individual Mini2 Patch CF Value - O O
752-726 CF_Mini2_PS[K] 110 1 1023 PS individual Mini2 Patch CF Value - O O
752-727 VH_Mini1[Y] 400 0 1023 Mini1 Patch VH Value - O O
752-728 VH_Mini1[M] 400 0 1023 Mini1 Patch VH Value - O O
752-729 VH_Mini1[C] 400 0 1023 Mini1 Patch VH Value - O O
752-730 VH_Mini1[K] 400 0 1023 Mini1 Patch VH Value - O O
752-731 VH_Mini2[Y] 400 0 1023 Mini2 Patch VH Value - O O
752-732 VH_Mini2[M] 400 0 1023 Mini2 Patch VH Value - O O
752-733 VH_Mini2[C] 400 0 1023 Mini2 Patch VH Value - O O
752-734 VH_Mini2[K] 400 0 1023 Mini2 Patch VH Value - O O
752-735 BCR_DC_OUT_Mini1[Y] 983 0 1300 Mini 1 Patch BCR Device Control Value - O O
752-736 BCR_DC_OUT_Mini1[M] 983 0 1300 Mini 1 Patch BCR Device Control Value - O O

Version 1.1 05/2014 6.3.13 NVM 752_Process Control 1 List

6-119
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-120 6.3.13 NVM 752_Process Control 1 List
Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-737 BCR_DC_OUT_Mini1[C] 983 0 1300 Mini 1 Patch BCR Device Control Value - O O
752-738 BCR_DC_OUT_Mini1[K] 983 0 1300 Mini 1 Patch BCR Device Control Value - O O
752-739 BCR_DC_OUT_Mini2[Y] 983 0 1300 Mini 2 Patch BCR Device Control Value - O O
752-740 BCR_DC_OUT_Mini2[M] 983 0 1300 Mini 2 Patch BCR Device Control Value - O O
752-741 BCR_DC_OUT_Mini2[C] 983 0 1300 Mini 2 Patch BCR Device Control Value - O O
752-742 BCR_DC_OUT_Mini2[K] 983 0 1300 Mini 2 Patch BCR Device Control Value - O O
752-743 BIAS_DC_OUT_Mini1[YMC] 290 0 1023 Mini 1 Patch BIAS Device Control Value - O O
752-744 BIAS_DC_OUT_Mini1[K] 290 0 1023 Mini 1 Patch BIAS Device Control Value - O O
752-745 BIAS_DC_OUT_Mini2[YMC] 290 0 1023 Mini 2 Patch BIAS Device Control Value - O O
752-746 BIAS_DC_OUT_Mini2[K] 290 0 1023 Mini 2 Patch BIAS Device Control Value - O O
752-747 LPH_OUT_Mini1[Y] 677 0 2046 Mini 1 Patch LPH Device Control Value - O O
752-748 LPH_OUT_Mini1[M] 677 0 2046 Mini 1 Patch LPH Device Control Value - O O
752-749 LPH_OUT_Mini1[C] 677 0 2046 Mini 1 Patch LPH Device Control Value - O O
752-750 LPH_OUT_Mini1[K] 677 0 2046 Mini 1 Patch LPH Device Control Value - O O
752-751 LPH_OUT_Mini2[Y] 677 0 2046 Mini 2 Patch LPH Device Control Value - O O
752-752 LPH_OUT_Mini2[M] 677 0 2046 Mini 2 Patch LPH Device Control Value - O O
752-753 LPH_OUT_Mini2[C] 677 0 2046 Mini 2 Patch LPH Device Control Value - O O
752-754 LPH_OUT_Mini2[K] 677 0 2046 Mini 2 Patch LPH Device Control Value - O O
752-755 Vdeve_TC[Y] 145 1 1023 TC Patch Vdeve Value - O O
752-756 Vdeve_TC[M] 145 1 1023 TC Patch Vdeve Value - O O
752-757 Vdeve_TC[C] 145 1 1023 TC Patch Vdeve Value - O O
752-758 Vdeve_TC[K] 145 1 1023 TC Patch Vdeve Value - O O
752-759 CF_TC[Y] 120 1 1023 TC Patch CF Value - O O
752-760 CF_TC[M] 120 1 1023 TC Patch CF Value - O O
752-761 CF_TC[C] 120 1 1023 TC Patch CF Value - O O
752-762 CF_TC[K] 120 1 1023 TC Patch CF Value - O O
752-763 RP_TC[Y] 5 0 1023 RP Value for TC Patch - O O
752-764 RP_TC[M] 5 0 1023 RP Value for TC Patch - O O
752-765 RP_TC[C] 5 0 1023 RP Value for TC Patch - O O
752-766 RP_TC[K] 5 0 1023 RP Value for TC Patch - O O
752-767 BCR_DC_OUT_TC[Y] 850 0 1300 TC Patch BCR Device Control Value - O O
752-768 BCR_DC_OUT_TC[M] 850 0 1300 TC Patch BCR Device Control Value - O O
752-769 BCR_DC_OUT_TC[C] 850 0 1300 TC Patch BCR Device Control Value - O O
752-770 BCR_DC_OUT_TC[K] 850 0 1300 TC Patch BCR Device Control Value - O O
752-771 BIAS_DC_OUT_TC[YMC] 150 0 1023 TC Patch BIAS Device Control Value - O O
752-772 BIAS_DC_OUT_TC[K] 150 0 1023 TC Patch BIAS Device Control Value - O O
752-773 LPH_OUT_TC[Y] 1232 0 2046 TC Patch LPH Device Control Value - O O
752-774 LPH_OUT_TC[M] 1232 0 2046 TC Patch LPH Device Control Value - O O
 Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-775 LPH_OUT_TC[C] 1232 0 2046 TC Patch LPH Device Control Value - O O
752-776 LPH_OUT_TC[K] 1232 0 2046 TC Patch LPH Device Control Value - O O
752-777 Reference Vdeve[Y] 270 1 1023 Reference Vdeve Value - O O
752-778 Reference Vdeve[M] 270 1 1023 Reference Vdeve Value - O O
752-779 Reference Vdeve[C] 270 1 1023 Reference Vdeve Value - O O
752-780 Reference Vdeve[K] 270 1 1023 Reference Vdeve Value - O O
752-781 Reference CF[Y] 110 1 1023 Reference CF Value - O O
752-782 Reference CF[M] 110 1 1023 Reference CF Value - O O
752-783 Reference CF[C] 110 1 1023 Reference CF Value - O O
752-784 Reference CF[K] 110 1 1023 Reference CF Value - O O
752-785 Reference RP[YMC] 10 0 1023 Reference RP Value - O O
752-786 Reference RP[K] 10 0 1023 Reference RP Value - O O
752-787 Reference VB_PCON[YMC] 290 0 1023 Reference VB Value - O O
752-788 Reference VB_PCON[K] 290 0 1023 Reference VB Value - O O
752-789 Reference VB_Standard [YMC] 290 0 1023 Reference VB Value - O O
752-790 Reference VB_Standard [K] 290 0 1023 Reference VB Value - O O
752-791 Reference VB_Mini1[YMC] 290 0 1023 Reference VB_Mini1 Value - O O
752-792 Reference VB_Mini1[K] 290 0 1023 Reference VB_Mini1 Value - O O
752-793 Reference VB_Mini2[YMC] 290 0 1023 Reference VB_Mini2 Value - O O
752-794 Reference VB_Mini2[K] 290 0 1023 Reference VB_Mini2 Value - O O
752-795 Reference VB_TC[YMC] 150 0 1023 Reference VB_TC Value - O O
752-796 Reference VB_TC[K] 150 0 1023 Reference VB_TC Value - O O
752-797 Vdeve Lower Limit [YMC] 250 1 1023 Vdeve Lower Limit Reference Value - O O
752-798 Vdeve Lower Limit [K] 250 1 1023 Vdeve Lower Limit Reference Value - O O
752-799 Vdeve Upper Limit [YMC] 390 1 1023 Vdeve Upper Limit Reference Valu - O O
752-800 Vdeve Upper Limit[K] 390 1 1023 Vdeve Upper Limit Reference Valu - O O
752-801 CF Lower Limit [YMC] 110 1 1023 CF Lower Limit Reference Value - O O
752-802 CF Lower Limit [K] 110 1 1023 CF Lower Limit Reference Value - O O
752-803 CF Upper Limit [YMC] 110 1 1023 CF Upper Limit Reference Value - O O
752-804 CF Upper Limit [K] 110 1 1023 CF Upper Limit Reference Value - O O
752-805 RP Lower Limit Value [YMC] 10 0 1023 RP Lower Limit Value - O O
752-806 RP Lower Limit Value [K] 10 0 1023 RP Lower Limit Value - O O
752-807 RP Upper Limit Value [YMC] 10 0 1023 RP Upper Limit Value - O O
752-808 RP Upper Limit Value [K] 10 0 1023 RP Upper Limit Value - O O
752-809 VH Lower Limit Value [YMC] 200 0 1023 Ghost supported VH Lower Limit Value - O O
752-810 VH Lower Limit Value [K] 200 0 1023 Ghost supported VH Lower Limit Value - O O
752-811 VH Upper Limit Value [Y] 1023 0 1023 VH Upper Limit Value - O O
752-812 VH Upper Limit Value [M] 1023 0 1023 VH Upper Limit Value - O O

Version 1.1 05/2014 6.3.13 NVM 752_Process Control 1 List

6-121
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-122 6.3.13 NVM 752_Process Control 1 List
Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-813 VH Upper Limit Value [C] 1023 0 1023 VH Upper Limit Value - O O
752-814 VH Upper Limit Value [K] 1023 0 1023 VH Upper Limit Value - O O
752-815 LPH_OUT Lower Limit Value [Y][PS0] 427 0 2046 LPH_OUT Lower Limit Value - O O
752-816 LPH_OUT Lower Limit Value [Y][PS1] 427 0 2046 LPH_OUT Lower Limit Value - O O
752-817 LPH_OUT Lower Limit Value [M][PS0] 427 0 2046 LPH_OUT Lower Limit Value - O O
752-818 LPH_OUT Lower Limit Value [M][PS1] 427 0 2046 LPH_OUT Lower Limit Value - O O
752-819 LPH_OUT Lower Limit Value [C][PS0] 427 0 2046 LPH_OUT Lower Limit Value - O O
752-820 LPH_OUT Lower Limit Value [C][PS1] 427 0 2046 LPH_OUT Lower Limit Value - O O
752-821 LPH_OUT Lower Limit Value [K][PS0] 427 0 2046 LPH_OUT Lower Limit Value - O O
752-822 LPH_OUT Lower Limit Value [K][PS1] 427 0 2046 LPH_OUT Lower Limit Value - O O
752-823 BCR_DC_OUT_Vm1[Y] 0 0 1300 BCR_DC_OUT_Vm1 - O O
752-824 BCR_DC_OUT_Vm1[M] 0 0 1300 BCR_DC_OUT_Vm1 - O O
752-825 BCR_DC_OUT_Vm1[C] 0 0 1300 BCR_DC_OUT_Vm1 - O O
752-826 BCR_DC_OUT_Vm1[K] 0 0 1300 BCR_DC_OUT_Vm1 - O O
752-827 BCR_DC_OUT_Vm2[Y] 0 0 1300 BCR_DC_OUT_Vm2 - O O
752-828 BCR_DC_OUT_Vm2[M] 0 0 1300 BCR_DC_OUT_Vm2 - O O
752-829 BCR_DC_OUT_Vm2[C] 0 0 1300 BCR_DC_OUT_Vm2 - O O
752-830 BCR_DC_OUT_Vm2[K] 0 0 1300 BCR_DC_OUT_Vm2 - O O
752-831 BCR_DC_OUT_Vm3[Y] 0 0 1300 BCR_DC_OUT_Vm3 - O O
752-832 BCR_DC_OUT_Vm3[M] 0 0 1300 BCR_DC_OUT_Vm3 - O O
752-833 BCR_DC_OUT_Vm3[C] 0 0 1300 BCR_DC_OUT_Vm3 - O O
752-834 BCR_DC_OUT_Vm3[K] 0 0 1300 BCR_DC_OUT_Vm3 - O O
752-835 BIAS_DC_OUT_Vd1[YMC] 0 0 1023 BIAS_DC_OUT_Vd1 - O O
752-836 BIAS_DC_OUT_Vd1[K] 0 0 1023 BIAS_DC_OUT_Vd1 - O O
752-837 BIAS_DC_OUT_Vd2[YMC] 0 0 1023 BIAS_DC_OUT_Vd2 - O O
752-838 BIAS_DC_OUT_Vd2[K] 0 0 1023 BIAS_DC_OUT_Vd2 - O O
752-839 BIAS_DC_OUT_Vd3[YMC] 0 0 1023 BIAS_DC_OUT_Vd3 - O O
752-840 BIAS_DC_OUT_Vd3[K] 0 0 1023 BIAS_DC_OUT_Vd3 - O O
752-841 Delta Vdeve_PCON_Target Difference [Y] 0 -1024 1023 Control Amount of PCON Potential Vdeve Value_ - O O
752-842 Delta Vdeve_PCON_Target Difference [M] 0 -1024 1023 Control Amount of PCON Potential Vdeve Value_ - O O
752-843 Delta Vdeve_PCON_Target Difference [C] 0 -1024 1023 Control Amount of PCON Potential Vdeve Value_ - O O
752-844 Delta Vdeve_PCON_Target Difference [K] 0 -1024 1023 Control Amount of PCON Potential Vdeve Value_ - O O
752-845 Before Delta Vdeve_PCON_Target Difference_Control 0 -1024 1023 Control Amount before the PCON Potential Vdeve Value control for - O O
[Y] each color
752-846 Before Delta Vdeve_PCON_Target Difference_Control 0 -1024 1023 Control Amount before the PCON Potential Vdeve Value control for - O O
[M] each color
752-847 Before Delta Vdeve_PCON_Target Difference_Control 0 -1024 1023 Control Amount before the PCON Potential Vdeve Value control for - O O
[C] each color
 Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-848 Before Delta Vdeve_PCON_Target Difference_Control 0 -1024 1023 Control Amount before the PCON Potential Vdeve Value control for - O O
[K] each color
752-849 No. of Vdeve_PCON Partition 1 1 255 PCON Potential Vdeve Value_Split Count from Delta Vdeve_Step - O O
752-850 Color Difference Delta Vdeve Max/Min Difference 0 0 1023 Difference of Max value and Min value of Color Difference PCON - O O
Potential Vdeve Value Control Amount
752-851 Correction Vdeve Lower Limit_Lower Limit Value[YMC] 240 1 1023 Correction Vdeve Lower Limit_Lower Limit Value - O O
752-852 Correction Vdeve Lower Limit_Lower Limit Value[K] 240 1 1023 Correction Vdeve Lower Limit_Lower Limit Value - O O
752-853 Correction Vdeve Lower Limit_Upper Limit Value [YMC] 260 1 1023 Correction Vdeve Lower Limit_Upper Limit Value - O O
752-854 Correction Vdeve Lower Limit_Upper Limit Value 260 1 1023 Correction Vdeve Lower Limit_Upper Limit Value - O O
752-855 Correction Vdeve Lower Limit_PS_Lower Limit Value 240 0 1023 PS individual Correction Vdeve Lower Limit_Lower Limit Value - O O
[YMC][PS0]
752-856 Correction Vdeve Lower Limit_PS_Lower Limit Value 240 0 1023 PS individual Correction Vdeve Lower Limit_Lower Limit Value - O O
[YMC][PS1]
752-857 Correction Vdeve Lower Limit_PS_Lower Limit Value 240 0 1023 PS individual Correction Vdeve Lower Limit_Lower Limit Value - O O
[K][PS0]
752-858 Correction Vdeve Lower Limit_PS_Lower Limit Value 240 0 1023 PS individual Correction Vdeve Lower Limit_Lower Limit Value - O O
[K][PS1]
752-859 Correction Vdeve Lower Limit_PS_Upper Limit 260 0 1023 PS individual Correction Vdeve Lower Limit_Upper Limit - O O
[YMC][PS0]
752-860 Correction Vdeve Lower Limit_PS_Upper Limit 260 0 1023 PS individual Correction Vdeve Lower Limit_Upper Limit - O O
[YMC][PS1]
752-861 Correction Vdeve Lower Limit_PS_Upper Limit Value 260 0 1023 PS individual Correction Vdeve Lower Limit_Upper Limit - O O
[K][PS0]
752-862 Correction Vdeve Lower Limit_PS_Upper Limit Value 260 0 1023 PS individual Correction Vdeve Lower Limit_Upper Limit - O O
[K][PS1]
752-863 Correction Vdeve Upper Limit_Lower Limit Value [YMC] 320 1 1023 Correction Vdeve Upper Limit_Lower Limit Value - O O
752-864 Correction Vdeve Upper Limit_Lower Limit Value [K] 320 1 1023 Correction Vdeve Upper Limit_Lower Limit Value - O O
752-865 Correction Vdeve Upper Limit_Upper Limit Value [YMC] 420 1 1023 Correction Vdeve Upper Limit_Upper Limit Value - O O
752-866 Correction Vdeve Upper Limit_Upper Limit Value [K] 420 1 1023 Correction Vdeve Upper Limit_Upper Limit Value - O O
752-867 Correction Vdeve Upper Limit_PS_Lower Limit Value 320 0 1023 PS individual Correction Vdeve Upper Limit_Lower Limit - O O
[YMC][PS0]
752-868 Correction Vdeve Upper Limit_PS_Lower Limit Value 320 0 1023 PS individual Correction Vdeve Upper Limit_Lower Limit - O O
[YMC][PS1]
752-869 Correction Vdeve Upper Limit_PS_Lower Limit Value 320 0 1023 PS individual Correction Vdeve Upper Limit_Lower Limit - O O
[K][PS0]
752-870 Correction Vdeve Upper Limit_PS_Lower Limit Value 320 0 1023 PS individual Correction Vdeve Upper Limit_Lower Limit - O O
[K][PS1]
752-871 Correction Vdeve Upper Limit_PS_Upper Limit Value 420 0 1023 PS individual Correction Vdeve Upper Limit_Upper Limit Value - O O
[YMC][PS0]
752-872 Correction Vdeve Upper Limit_PS_Upper Limit Value 420 0 1023 PS individual Correction Vdeve Upper Limit_Upper Limit Value - O O
[YMC][PS1]

Version 1.1 05/2014 6.3.13 NVM 752_Process Control 1 List

6-123
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-124 6.3.13 NVM 752_Process Control 1 List
Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-873 Correction Vdeve Upper Limit_PS_Upper Limit Value 420 0 1023 PS individual Correction Vdeve Upper Limit_Upper Limit Value - O O
[K][PS0]
752-874 Correction Vdeve Upper Limit_PS_Upper Limit Value 420 0 1023 PS individual Correction Vdeve Upper Limit_Upper Limit Value - O O
[K][PS1]
752-875 Correction CF Lower Limit_Lower Limit Value [YMC] 100 1 1023 Correction CF Lower Limit_Lower Limit Value - O O
752-876 Correction CF Lower Limit_Lower Limit Value [K] 100 1 1023 Correction CF Lower Limit_Lower Limit Value - O O
752-877 Correction CF Lower Limit_Upper Limit Value [YMC] 120 1 1023 Correction CF Lower Limit_Upper Limit Value - O O
752-878 Correction CF Lower Limit_Upper Limit Value [K] 120 1 1023 Correction CF Lower Limit_Upper Limit Value - O O
752-879 Correction CF Upper Limit_Lower Limit Value [YMC] 100 1 1023 Correction CF Upper Limit_Lower Limit Value - O O
752-880 Correction CF Upper Limit_Lower Limit Value [K] 100 1 1023 Correction CF Upper Limit_Lower Limit Value - O O
752-881 Correction CF Upper Limit_Upper Limit Value[YMC] 120 1 1023 Correction CF Upper Limit_Upper Limit Value - O O
752-882 Correction CF Upper Limit_Upper Limit Value 120 1 1023 Correction CF Upper Limit_Upper Limit Value - O O
752-883 Ghost supported DeltaV[YMC] 0 0 255 Ghost supported DeltaV Offset Value - O O
752-884 Ghost supported DeltaV[K] 0 0 255 Ghost supported DeltaV Offset Value - O O
752-885 VH Set Point[YMC] 1023 0 1023 Ghost Supported VH Set Point - O O
752-886 VH Set Point[K] 1023 0 1023 Ghost Supported VH Set Point - O O
752-887 Delta VHVB Correction Amount [Y] 0 0 255 Delta VHVB Correction Amount - O O
752-888 Delta VHVB Correction Amount [M] 0 0 255 Delta VHVB Correction Amount - O O
752-889 Delta VHVB Correction Amount [C] 0 0 255 Delta VHVB Correction Amount - O O
752-890 Delta VHVB Correction Amount [K] 0 0 255 Delta VHVB Correction Amount - O O
752-891 BCR Altitude Offset [Y] 0 -1024 1023 BCR Altitude Offset Value - O O
752-892 BCR Altitude Offset [M] 0 -1024 1023 BCR Altitude Offset Value - O O
752-893 BCR Altitude Offset[C] 0 -1024 1023 BCR Altitude Offset Value - O O
752-894 BCR Altitude Offset [K] 0 -1024 1023 BCR Altitude Offset Value - O O
752-895 BCR Altitude Coefficient [Y] 1024 0 2047 BCR Altitude Coefficient - O O
752-896 BCR Altitude Coefficient [M] 1024 0 2047 BCR Altitude Coefficient - O O
752-897 BCR Altitude Coefficient [C] 1024 0 2047 BCR Altitude Coefficient - O O
752-898 BCR Altitude Coefficient [K] 1024 0 2047 BCR Altitude Coefficient - O O
752-899 Delta LPH Environment Correction PR Correction 0 0 255 Film Thickness Correction of Environment Correction Amount - O O
Amount [Y]
752-900 Delta LPH Environment Correction PR Correction 0 0 255 Film Thickness Correction of Environment Correction Amount - O O
Amount [M]
752-901 Delta LPH Environment Correction PR Correction 0 0 255 Film Thickness Correction of Environment Correction Amount - O O
Amount [C]
752-902 Delta LPH Environment Correction PR Correction 0 0 255 Film Thickness Correction of Environment Correction Amount - O O
Amount [K]
752-903 Delta LPH Environment Correction Amount [YMC] 0 -1024 1023 Delta LPH Environment Correction Amount - O O
752-904 Delta LPH Environment Correction Amount [K] 0 -1024 1023 Delta LPH Environment Correction Amount - O O
 Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-905 P_LUTCin[YMC][LUT0] 25 0 255 Cin for P-LUT Value Calculation (invariable) (Refers to - O O
0<LUT0<LUT1<LUT2<LUT3<LUT4<LUT5)
752-906 P_LUTCin[YMC][LUT1] 36 0 255 Cin for P-LUT Value Calculation (invariable) (Refers to - O O
0<LUT0<LUT1<LUT2<LUT3<LUT4<LUT5)
752-907 P_LUTCin[YMC][LUT2] 76 0 255 Cin for P-LUT Value Calculation (invariable) (Refers to - O O
0<LUT0<LUT1<LUT2<LUT3<LUT4<LUT5)
752-908 P_LUTCin[YMC][LUT3] 112 0 255 Cin for P-LUT Value Calculation (invariable) (Refers to - O O
0<LUT0<LUT1<LUT2<LUT3<LUT4<LUT5)
752-909 P_LUTCin[YMC][LUT4] 148 0 255 Cin for P-LUT Value Calculation (invariable) (Refers to - O O
0<LUT0<LUT1<LUT2<LUT3<LUT4<LUT5)
752-910 P_LUTCin[YMC][LUT5] 255 0 255 Cin for P-LUT Value Calculation (invariable) (Refers to - O O
0<LUT0<LUT1<LUT2<LUT3<LUT4<LUT5)
752-911 P_LUTCin[K][LUT0] 25 0 255 Cin for P-LUT Value Calculation (invariable) (Refers to - O O
0<LUT0<LUT1<LUT2<LUT3<LUT4<LUT5)
752-912 P_LUTCin[K][LUT1] 36 0 255 Cin for P-LUT Value Calculation (invariable) (Refers to - O O
0<LUT0<LUT1<LUT2<LUT3<LUT4<LUT5)
752-913 P_LUTCin[K][LUT2] 76 0 255 Cin for P-LUT Value Calculation (invariable) (Refers to - O O
0<LUT0<LUT1<LUT2<LUT3<LUT4<LUT5)
752-914 P_LUTCin[K][LUT3] 112 0 255 Cin for P-LUT Value Calculation (invariable) (Refers to - O O
0<LUT0<LUT1<LUT2<LUT3<LUT4<LUT5)
752-915 P_LUTCin[K][LUT4] 148 0 255 Cin for P-LUT Value Calculation (invariable) (Refers to - O O
0<LUT0<LUT1<LUT2<LUT3<LUT4<LUT5)
752-916 P_LUTCin[K][LUT5] 255 0 255 Cin for P-LUT Value Calculation (invariable) (Refers to - O O
0<LUT0<LUT1<LUT2<LUT3<LUT4<LUT5)
752-917 Delta LUT[Y][LUT1] 0 -4080 8160 Delta LUT Value after Change Amount Check (times 16 value) - O O
752-918 Delta LUT[Y][LUT2] 0 -4080 8160 Delta LUT Value after Change Amount Check (times 16 value) - O O
752-919 Delta LUT[Y][LUT3] 0 -4080 8160 Delta LUT Value after Change Amount Check (times 16 value) - O O
752-920 Delta LUT[Y][LUT4] 0 -4080 8160 Delta LUT Value after Change Amount Check (times 16 value) - O O
752-921 Delta LUT[M][LUT1] 0 -4080 8160 Delta LUT Value after Change Amount Check (times 16 value) - O O
752-922 Delta LUT[M][LUT2] 0 -4080 8160 Delta LUT Value after Change Amount Check (times 16 value) - O O
752-923 Delta LUT[M][LUT3] 0 -4080 8160 Delta LUT Value after Change Amount Check (times 16 value) - O O
752-924 Delta LUT[M][LUT4] 0 -4080 8160 Delta LUT Value after Change Amount Check (times 16 value) - O O
752-925 Delta LUT[C][LUT1] 0 -4080 8160 Delta LUT Value after Change Amount Check (times 16 value) - O O
752-926 Delta LUT[C][LUT2] 0 -4080 8160 Delta LUT Value after Change Amount Check (times 16 value) - O O
752-927 Delta LUT[C][LUT3] 0 -4080 8160 Delta LUT Value after Change Amount Check (times 16 value) - O O
752-928 Delta LUT[C][LUT4] 0 -4080 8160 Delta LUT Value after Change Amount Check (times 16 value) - O O
752-929 Delta LUT[K][LUT1] 0 -4080 8160 Delta LUT Value after Change Amount Check (times 16 value) - O O
752-930 Delta LUT[K][LUT2] 0 -4080 8160 Delta LUT Value after Change Amount Check (times 16 value) - O O
752-931 Delta LUT[K][LUT3] 0 -4080 8160 Delta LUT Value after Change Amount Check (times 16 value) - O O
752-932 Delta LUT[K][LUT4] 0 -4080 8160 Delta LUT Value after Change Amount Check (times 16 value) - O O

Version 1.1 05/2014 6.3.13 NVM 752_Process Control 1 List

6-125
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-126 6.3.13 NVM 752_Process Control 1 List
Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-933 Manual LUT Adjustment Value [Y][L] 0 -128 127 The difference amount each corresponds -128~0~127. - O O
752-934 Manual LUT Adjustment Value [Y][M] 0 -128 127 The difference amount each corresponds -128~0~127. - O O
752-935 Manual LUT Adjustment Value [Y][H] 0 -128 127 The difference amount each corresponds -128~0~127. - O O
752-936 Manual LUT Adjustment Value [M][L] 0 -128 127 The difference amount each corresponds -128~0~127. - O O
752-937 Manual LUT Adjustment Value [M] [M] 0 -128 127 The difference amount each corresponds -128~0~127. - O O
752-938 Manual LUT Adjustment Value [M][H] 0 -128 127 The difference amount each corresponds -128~0~127. - O O
752-939 Manual LUT Adjustment Value [C][L] 0 -128 127 The difference amount each corresponds -128~0~127. - O O
752-940 Manual LUT Adjustment Value [C][M] 0 -128 127 The difference amount each corresponds -128~0~127. - O O
752-941 Manual LUT Adjustment Value [C][H] 0 -128 127 The difference amount each corresponds -128~0~127. - O O
752-942 Manual LUT Adjustment Value [K][L] 0 -128 127 The difference amount each corresponds -128~0~127. - O O
752-943 Manual LUT Adjustment Value [K][M] 0 -128 127 The difference amount each corresponds -128~0~127. - O O
752-944 Manual LUT Adjustment Value [K][H] 0 -128 127 The difference amount each corresponds -128~0~127. - O O
752-945 IIT_Calib Value [Y] 0 0 255 IOT_NVM IIT CCD_Calib Result Value - O O
752-946 IIT_Calib Value [M] 0 0 255 IOT_NVM IIT CCD_Calib Result Value - O O
752-947 IIT_Calib Value [C] 0 0 255 IOT_NVM IIT CCD_Calib Result Value - O O
752-948 IIT_Calib Value [K] 0 0 255 IOT_NVM IIT CCD_Calib Result Value - O O
752-949 MiniSetup Execution Time Stored Value [BW][0] 0 0 4294967295 Stored Value of MiniSetup Execution Time minute O O
752-950 MiniSetup Execution Time Stored Value [BW][1] 0 0 4294967295 Stored Value of MiniSetup Execution Time minute O O
752-951 MiniSetup Execution Time Stored Value [BW][2] 0 0 4294967295 Stored Value of MiniSetup Execution Time minute O O
752-952 MiniSetup Execution Time Stored Value [BW][3] 0 0 4294967295 Stored Value of MiniSetup Execution Time minute O O
752-953 MiniSetup Execution Time Stored Value [BW][4] 0 0 4294967295 Stored Value of MiniSetup Execution Time minute O O
752-954 MiniSetup Execution Time Stored Value [FC][0] 0 0 4294967295 Stored Value of MiniSetup Execution Time minute O O
752-955 MiniSetup Execution Time Stored Value [FC][1] 0 0 4294967295 Stored Value of MiniSetup Execution Time minute O O
752-956 MiniSetup Execution Time Stored Value [FC][2] 0 0 4294967295 Stored Value of MiniSetup Execution Time minute O O
752-957 MiniSetup Execution Time Stored Value [FC][3] 0 0 4294967295 Stored Value of MiniSetup Execution Time minute O O
752-958 MiniSetup Execution Time Stored Value [FC][4] 0 0 4294967295 Stored Value of MiniSetup Execution Time minute O O
752-959 MiniSetup Execution Requirement Stored Value [1][0] 0 0 255 Stored Value of MiniSetup Execution Requirement - O O
752-960 MiniSetup Execution Requirement Stored Value [1][1] 0 0 255 Stored Value of MiniSetup Execution Requirement - O O
752-961 MiniSetup Execution Requirement Stored Value [1][2] 0 0 255 Stored Value of MiniSetup Execution Requirement - O O
752-962 MiniSetup Execution Requirement Stored Value [1][3] 0 0 255 Stored Value of MiniSetup Execution Requirement - O O
752-963 MiniSetup Execution Requirement Stored Value [1][4] 0 0 255 Stored Value of MiniSetup Execution Requirement - O O
752-964 MiniSetup Execution Requirement Stored Value [2][0] 0 0 255 Stored Value of MiniSetup Execution Requirement - O O
752-965 MiniSetup Execution Requirement Stored Value [2][1] 0 0 255 Stored Value of MiniSetup Execution Requirement - O O
752-966 MiniSetup Execution Requirement Stored Value [2][2] 0 0 255 Stored Value of MiniSetup Execution Requirement - O O
752-967 MiniSetup Execution Requirement Stored Value [2][3] 0 0 255 Stored Value of MiniSetup Execution Requirement - O O
752-968 MiniSetup Execution Requirement Stored Value [2][4] 0 0 255 Stored Value of MiniSetup Execution Requirement - O O
752-969 MiniSetup Execution Requirement Stored Value [3][0] 0 0 255 Stored Value of MiniSetup Execution Requirement - O O
752-970 MiniSetup Execution Requirement Stored Value [3][1] 0 0 255 Stored Value of MiniSetup Execution Requirement - O O
 Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-971 MiniSetup Execution Requirement Stored Value [3][2] 0 0 255 Stored Value of MiniSetup Execution Requirement - O O
752-972 MiniSetup Execution Requirement Stored Value [3][3] 0 0 255 Stored Value of MiniSetup Execution Requirement - O O
752-973 MiniSetup Execution Requirement Stored Value [3][4] 0 0 255 Stored Value of MiniSetup Execution Requirement - O O
752-974 Last Setup Speed Stored Value_Mid/End[YMC][0] 0 0 1 Process Speed Stored Value after Mid/EndSetup is complete - O O
0: 63mm/s, 1: 126mm/s
752-975 Last Setup Speed Stored Value_Mid/End[YMC][1] 0 0 1 Process Speed Stored Value after Mid/EndSetup is complete - O O
0: 63mm/s, 1: 126mm/s
752-976 Last Setup Speed Stored Value_Mid/End[YMC][2] 0 0 1 Process Speed Stored Value after Mid/EndSetup is complete - O O
0: 63mm/s, 1: 126mm/s
752-977 Last Setup Speed Stored Value_Mid/End[YMC][3] 0 0 1 Process Speed Stored Value after Mid/EndSetup is complete - O O
0: 63mm/s, 1: 126mm/s
752-978 Last Setup Speed Stored Value_Mid/End[YMC][4] 0 0 1 Process Speed Stored Value after Mid/EndSetup is complete - O O
0: 63mm/s, 1: 126mm/s
752-979 Last Setup Speed Stored Value_Mid/End[YMC][5] 0 0 1 Process Speed Stored Value after Mid/EndSetup is complete - O O
0: 63mm/s, 1: 126mm/s
752-980 Last Setup Speed Stored Value_Mid/End[YMC][6] 0 0 1 Process Speed Stored Value after Mid/EndSetup is complete - O O
0: 63mm/s, 1: 126mm/s
752-981 Last Setup Speed Stored Value_Mid/End[YMC][7] 0 0 1 Process Speed Stored Value after Mid/EndSetup is complete - O O
0: 63mm/s, 1: 126mm/s
752-982 Last Setup Speed Stored Value_Mid/End[YMC][8] 0 0 1 Process Speed Stored Value after Mid/EndSetup is complete - O O
0: 63mm/s, 1: 126mm/s
752-983 Last Setup Speed Stored Value_Mid/End[YMC][9] 0 0 1 Process Speed Stored Value after Mid/EndSetup is complete - O O
0: 63mm/s, 1: 126mm/s
752-984 Last Setup Speed Stored Value_Mid/End[K][0] 0 0 1 Process Speed Stored Value after Mid/EndSetup is complete - O O
0: 63mm/s, 1: 126mm/s
752-985 Last Setup Speed Stored Value_Mid/End[K][1] 0 0 1 Process Speed Stored Value after Mid/EndSetup is complete - O O
0: 63mm/s, 1: 126mm/s
752-986 Last Setup Speed Stored Value_Mid/End[K][2] 0 0 1 Process Speed Stored Value after Mid/EndSetup is complete - O O
0: 63mm/s, 1: 126mm/s
752-987 Last Setup Speed Stored Value_Mid/End[K][3] 0 0 1 Process Speed Stored Value after Mid/EndSetup is complete - O O
0: 63mm/s, 1: 126mm/s
752-988 Last Setup Speed Stored Value_Mid/End[K][4] 0 0 1 Process Speed Stored Value after Mid/EndSetup is complete - O O
0: 63mm/s, 1: 126mm/s
752-989 Last Setup Speed Stored Value_Mid/End[K][5] 0 0 1 Process Speed Stored Value after Mid/EndSetup is complete - O O
0: 63mm/s, 1: 126mm/s
752-990 Last Setup Speed Stored Value_Mid/End[K][6] 0 0 1 Process Speed Stored Value after Mid/EndSetup is complete - O O
0: 63mm/s, 1: 126mm/s
752-991 Last Setup Speed Stored Value_Mid/End[K][7] 0 0 1 Process Speed Stored Value after Mid/EndSetup is complete - O O
0: 63mm/s, 1: 126mm/s
752-992 Last Setup Speed Stored Value_Mid/End[K][8] 0 0 1 Process Speed Stored Value after Mid/EndSetup is complete - O O
0: 63mm/s, 1: 126mm/s

Version 1.1 05/2014 6.3.13 NVM 752_Process Control 1 List

6-127
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-128 6.3.13 NVM 752_Process Control 1 List
Table 1 NVM 752_Process Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
752-993 Last Setup Speed Stored Value_Mid/End[K][9] 0 0 1 Process Speed Stored Value after Mid/EndSetup is complete - O O
0: 63mm/s, 1: 126mm/s
752-996 Disp Time Integrated Vaue_Refill[Y] 0 0 4294967295 Refill Determination Disp Integrated Value 1 [ms] O O
752-997 Disp Time Integrated Vaue_Refill[M] 0 0 4294967295 Refill Determination Disp Integrated Value 1 [ms] O O
752-998 Disp Time Integrated Vaue_Refill[C] 0 0 4294967295 Refill Determination Disp Integrated Value 1 [ms] O O
752-999 Disp Time Integrated Vaue_Refill[K] 0 0 4294967295 Refill Determination Disp Integrated Value 1 [ms] O O
6.3.14 NVM 753_Process Control 2 List
Table 1 NVM 753_Process Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
753-001 RADC_Potential_Mini1 Preserve Value_Mini[Y][0] 0 0 1023 MiniSetup Completed ADC _Potential_Mini1 Preserve Value - O O
753-002 RADC_Potential_Mini1 Preserve Value_Mini[Y][1] 0 0 1023 MiniSetup Completed ADC _Potential_Mini1 Preserve Value - O O
753-003 RADC_Potential_Mini1 Preserve Value_Mini[Y][2] 0 0 1023 MiniSetup Completed ADC _Potential_Mini1 Preserve Value - O O
753-004 RADC_Potential_Mini1 Preserve Value_Mini[Y][3] 0 0 1023 MiniSetup Completed ADC _Potential_Mini1 Preserve Value - O O
753-005 RADC_Potential_Mini1 Preserve Value_Mini[Y][4] 0 0 1023 MiniSetup Completed ADC _Potential_Mini1 Preserve Value - O O
753-006 RADC_Potential_Mini1 Preserve Value_Mini[M][0] 0 0 1023 MiniSetup Completed ADC _Potential_Mini1 Preserve Value - O O
753-007 RADC_Potential_Mini1 Preserve Value_Mini[M][1] 0 0 1023 MiniSetup Completed ADC _Potential_Mini1 Preserve Value - O O
753-008 RADC_Potential_Mini1 Preserve Value_Mini[M][2] 0 0 1023 MiniSetup Completed ADC _Potential_Mini1 Preserve Value - O O
753-009 RADC_Potential_Mini1 Preserve Value_Mini[M][3] 0 0 1023 MiniSetup Completed ADC _Potential_Mini1 Preserve Value - O O
753-010 RADC_Potential_Mini1 Preserve Value_Mini[M][4] 0 0 1023 MiniSetup Completed ADC _Potential_Mini1 Preserve Value - O O
753-011 RADC_Potential_Mini1 Preserve Value_Mini[C][0] 0 0 1023 MiniSetup Completed ADC _Potential_Mini1 Preserve Value - O O
753-012 RADC_Potential_Mini1 Preserve Value_Mini[C][1] 0 0 1023 MiniSetup Completed ADC _Potential_Mini1 Preserve Value - O O
753-013 RADC_Potential_Mini1 Preserve Value_Mini[C][2] 0 0 1023 MiniSetup Completed ADC _Potential_Mini1 Preserve Value - O O
753-014 RADC_Potential_Mini1 Preserve Value_Mini[C][3] 0 0 1023 MiniSetup Completed ADC _Potential_Mini1 Preserve Value - O O
753-015 RADC_Potential_Mini1 Preserve Value_Mini[C][4] 0 0 1023 MiniSetup Completed ADC _Potential_Mini1 Preserve Value - O O
753-016 RADC_Potential_Mini1 Preserve Value_Mini[K][0] 0 0 1023 MiniSetup Completed ADC _Potential_Mini1 Preserve Value - O O
753-017 RADC_Potential_Mini1 Preserve Value_Mini[K][1] 0 0 1023 MiniSetup Completed ADC _Potential_Mini1 Preserve Value - O O
753-018 RADC_Potential_Mini1 Preserve Value_Mini[K][2] 0 0 1023 MiniSetup Completed ADC _Potential_Mini1 Preserve Value - O O
753-019 RADC_Potential_Mini1 Preserve Value_Mini[K][3] 0 0 1023 MiniSetup Completed ADC _Potential_Mini1 Preserve Value - O O
753-020 RADC_Potential_Mini1 Preserve Value_Mini[K][4] 0 0 1023 MiniSetup Completed ADC _Potential_Mini1 Preserve Value - O O
753-021 RADC_Potential_Mini2 Preserve Value_Mini[Y][0] 0 0 1023 MiniSetup Completed ADC_Potential_Mini2 Preserve Value - O O
753-022 RADC_Potential_Mini2 Preserve Value_Mini[Y][1] 0 0 1023 MiniSetup Completed ADC_Potential_Mini2 Preserve Value - O O
753-023 RADC_Potential_Mini2 Preserve Value_Mini[Y][2] 0 0 1023 MiniSetup Completed ADC_Potential_Mini2 Preserve Value - O O
753-024 RADC_Potential_Mini2 Preserve Value_Mini[Y][3] 0 0 1023 MiniSetup Completed ADC_Potential_Mini2 Preserve Value - O O
753-025 RADC_Potential_Mini2 Preserve Value_Mini[Y][4] 0 0 1023 MiniSetup Completed ADC_Potential_Mini2 Preserve Value - O O
753-026 RADC_Potential_Mini2 Preserve Value_Mini[M][0] 0 0 1023 MiniSetup Completed ADC_Potential_Mini2 Preserve Value - O O
753-027 RADC_Potential_Mini2 Preserve Value_Mini[M][1] 0 0 1023 MiniSetup Completed ADC_Potential_Mini2 Preserve Value - O O
753-028 RADC_Potential_Mini2 Preserve Value_Mini[M][2] 0 0 1023 MiniSetup Completed ADC_Potential_Mini2 Preserve Value - O O
753-029 RADC_Potential_Mini2 Preserve Value_Mini[M][3] 0 0 1023 MiniSetup Completed ADC_Potential_Mini2 Preserve Value - O O
753-030 RADC_Potential_Mini2 Preserve Value_Mini[M][4] 0 0 1023 MiniSetup Completed ADC_Potential_Mini2 Preserve Value - O O
753-031 RADC_Potential_Mini2 Preserve Value_Mini[C][0] 0 0 1023 MiniSetup Completed ADC_Potential_Mini2 Preserve Value - O O
753-032 RADC_Potential_Mini2 Preserve Value_Mini[C][1] 0 0 1023 MiniSetup Completed ADC_Potential_Mini2 Preserve Value - O O
753-033 RADC_Potential_Mini2 Preserve Value_Mini[C][2] 0 0 1023 MiniSetup Completed ADC_Potential_Mini2 Preserve Value - O O
753-034 RADC_Potential_Mini2 Preserve Value_Mini[C][3] 0 0 1023 MiniSetup Completed ADC_Potential_Mini2 Preserve Value - O O
753-035 RADC_Potential_Mini2 Preserve Value_Mini[C][4] 0 0 1023 MiniSetup Completed ADC_Potential_Mini2 Preserve Value - O O
753-036 RADC_Potential_Mini2 Preserve Value_Mini[K][0] 0 0 1023 MiniSetup Completed ADC_Potential_Mini2 Preserve Value - O O

Version 1.1 05/2014 6.3.14 NVM 753_Process Control 2 List

6-129
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-130 6.3.14 NVM 753_Process Control 2 List
Table 1 NVM 753_Process Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
753-037 RADC_Potential_Mini2 Preserve Value_Mini[K][1] 0 0 1023 MiniSetup Completed ADC_Potential_Mini2 Preserve Value - O O
753-038 RADC_Potential_Mini2 Preserve Value_Mini[K][2] 0 0 1023 MiniSetup Completed ADC_Potential_Mini2 Preserve Value - O O
753-039 RADC_Potential_Mini2 Preserve Value_Mini[K][3] 0 0 1023 MiniSetup Completed ADC_Potential_Mini2 Preserve Value - O O
753-040 RADC_Potential_Mini2 Preserve Value_Mini[K][4] 0 0 1023 MiniSetup Completed ADC_Potential_Mini2 Preserve Value - O O
753-041 RADC_Potential Preserve Value_Mid/End[Y][0] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-042 RADC_Potential Preserve Value_Mid/End[Y][1] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-043 RADC_Potential Preserve Value_Mid/End[Y][2] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-044 RADC_Potential Preserve Value_Mid/End[Y][3] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-045 RADC_Potential Preserve Value_Mid/End[Y][4] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-046 RADC_Potential Preserve Value_Mid/End[Y][5] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-047 RADC_Potential Preserve Value_Mid/End[Y][6] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-048 RADC_Potential Preserve Value_Mid/End[Y][7] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-049 RADC_Potential Preserve Value_Mid/End[Y][8] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-050 RADC_Potential Preserve Value_Mid/End[Y][9] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-051 RADC_Potential Preserve Value_Mid/End[M][0] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-052 RADC_Potential Preserve Value_Mid/End[M][1] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-053 RADC_Potential Preserve Value_Mid/End[M][2] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-054 RADC_Potential Preserve Value_Mid/End[M][3] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-055 RADC_Potential Preserve Value_Mid/End[M][4] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-056 RADC_Potential Preserve Value_Mid/End[M][5] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-057 RADC_Potential Preserve Value_Mid/End[M][6] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-058 RADC_Potential Preserve Value_Mid/End[M][7] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-059 RADC_Potential Preserve Value_Mid/End[M][8] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-060 RADC_Potential Preserve Value_Mid/End[M][9] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-061 RADC_Potential Preserve Value_Mid/End[C][0] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-062 RADC_Potential Preserve Value_Mid/End[C][1] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-063 RADC_Potential Preserve Value_Mid/End[C][2] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-064 RADC_Potential Preserve Value_Mid/End[C][3] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-065 RADC_Potential Preserve Value_Mid/End[C][4] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-066 RADC_Potential Preserve Value_Mid/End[C][5] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-067 RADC_Potential Preserve Value_Mid/End[C][6] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-068 RADC_Potential Preserve Value_Mid/End[C][7] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-069 RADC_Potential Preserve Value_Mid/End[C][8] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-070 RADC_Potential Preserve Value_Mid/End[C][9] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-071 RADC_Potential Preserve Value_Mid/End[K][0] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-072 RADC_Potential Preserve Value_Mid/End[K][1] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-073 RADC_Potential Preserve Value_Mid/End[K][2] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-074 RADC_Potential Preserve Value_Mid/End[K][3] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
 Table 1 NVM 753_Process Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
753-075 RADC_Potential Preserve Value_Mid/End[K][4] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-076 RADC_Potential Preserve Value_Mid/End[K][5] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-077 RADC_Potential Preserve Value_Mid/End[K][6] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-078 RADC_Potential Preserve Value_Mid/End[K][7] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-079 RADC_Potential Preserve Value_Mid/End[K][8] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-080 RADC_Potential Preserve Value_Mid/End[K][9] 0 0 1023 Mid/EndSetup Completed ADC_Potential Preserve Value - O O
753-081 RADC_Potential Preserve Value_Mini[Y][0] 0 0 1023 MiniSetup Completed ADC_Potential Preserve Value - O O
753-082 RADC_Potential Preserve Value_Mini[Y][1] 0 0 1023 MiniSetup Completed ADC_Potential Preserve Value - O O
753-083 RADC_Potential Preserve Value_Mini[Y][2] 0 0 1023 MiniSetup Completed ADC_Potential Preserve Value - O O
753-084 RADC_Potential Preserve Value_Mini[Y][3] 0 0 1023 MiniSetup Completed ADC_Potential Preserve Value - O O
753-085 RADC_Potential Preserve Value_Mini[Y][4] 0 0 1023 MiniSetup Completed ADC_Potential Preserve Value - O O
753-086 RADC_Potential Preserve Value_Mini[M][0] 0 0 1023 MiniSetup Completed ADC_Potential Preserve Value - O O
753-087 RADC_Potential Preserve Value_Mini[M][1] 0 0 1023 MiniSetup Completed ADC_Potential Preserve Value - O O
753-088 RADC_Potential Preserve Value_Mini[M][2] 0 0 1023 MiniSetup Completed ADC_Potential Preserve Value - O O
753-089 RADC_Potential Preserve Value_Mini[M][3] 0 0 1023 MiniSetup Completed ADC_Potential Preserve Value - O O
753-090 RADC_Potential Preserve Value_Mini[M][4] 0 0 1023 MiniSetup Completed ADC_Potential Preserve Value - O O
753-091 RADC_Potential Preserve Value_Mini[C][0] 0 0 1023 MiniSetup Completed ADC_Potential Preserve Value - O O
753-092 RADC_Potential Preserve Value_Mini[C][1] 0 0 1023 MiniSetup Completed ADC_Potential Preserve Value - O O
753-093 RADC_Potential Preserve Value_Mini[C][2] 0 0 1023 MiniSetup Completed ADC_Potential Preserve Value - O O
753-094 RADC_Potential Preserve Value_Mini[C][3] 0 0 1023 MiniSetup Completed ADC_Potential Preserve Value - O O
753-095 RADC_Potential Preserve Value_Mini[C][4] 0 0 1023 MiniSetup Completed ADC_Potential Preserve Value - O O
753-096 RADC_Potential Preserve Value_Mini[K][0] 0 0 1023 MiniSetup Completed ADC_Potential Preserve Value - O O
753-097 RADC_Potential Preserve Value_Mini[K][1] 0 0 1023 MiniSetup Completed ADC_Potential Preserve Value - O O
753-098 RADC_Potential Preserve Value_Mini[K][2] 0 0 1023 MiniSetup Completed ADC_Potential Preserve Value - O O
753-099 RADC_Potential Preserve Value_Mini[K][3] 0 0 1023 MiniSetup Completed ADC_Potential Preserve Value - O O
753-100 RADC_Potential Preserve Value_Mini[K][4] 0 0 1023 MiniSetup Completed ADC_Potential Preserve Value - O O
753-101 RADC_Tone Preserve Value_Mini[Y][Patch1][0] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-102 RADC_Tone Preserve Value_Mini[Y][Patch1][1] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-103 RADC_Tone Preserve Value_Mini[Y][Patch1][2] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-104 RADC_Tone Preserve Value_Mini[Y][Patch1][3] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-105 RADC_Tone Preserve Value_Mini[Y][Patch1][4] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-106 RADC_Tone Preserve Value_Mini[Y][Patch2][0] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-107 RADC_Tone Preserve Value_Mini[Y][Patch2][1] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-108 RADC_Tone Preserve Value_Mini[Y][Patch2][2] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-109 RADC_Tone Preserve Value_Mini[Y][Patch2][3] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-110 RADC_Tone Preserve Value_Mini[Y][Patch2][4] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-111 RADC_Tone Preserve Value_Mini[Y][Patch3][0] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-112 RADC_Tone Preserve Value_Mini[Y][Patch3][1] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O

Version 1.1 05/2014 6.3.14 NVM 753_Process Control 2 List

6-131
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-132 6.3.14 NVM 753_Process Control 2 List
Table 1 NVM 753_Process Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
753-113 RADC_Tone Preserve Value_Mini[Y][Patch3][2] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-114 RADC_Tone Preserve Value_Mini[Y][Patch3][3] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-115 RADC_Tone Preserve Value_Mini[Y][Patch3][4] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-116 RADC_Tone Preserve Value_Mini[Y][Patch4][0] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-117 RADC_Tone Preserve Value_Mini[Y][Patch4][1] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-118 RADC_Tone Preserve Value_Mini[Y][Patch4][2] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-119 RADC_Tone Preserve Value_Mini[Y][Patch4][3] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-120 RADC_Tone Preserve Value_Mini[Y][Patch4][4] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-121 RADC_Tone Preserve Value_Mini[M][Patch1][0] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-122 RADC_Tone Preserve Value_Mini[M][Patch1][1] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-123 RADC_Tone Preserve Value_Mini[M][Patch1][2] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-124 RADC_Tone Preserve Value_Mini[M][Patch1][3] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-125 RADC_Tone Preserve Value_Mini[M][Patch1][4] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-126 RADC_Tone Preserve Value_Mini[M][Patch2][0] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-127 RADC_Tone Preserve Value_Mini[M][Patch2][1] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-128 RADC_Tone Preserve Value_Mini[M][Patch2][2] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-129 RADC_Tone Preserve Value_Mini[M][Patch2][3] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-130 RADC_Tone Preserve Value_Mini[M][Patch2][4] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-131 RADC_Tone Preserve Value_Mini[M][Patch3][0] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-132 RADC_Tone Preserve Value_Mini[M][Patch3][1] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-133 RADC_Tone Preserve Value_Mini[M][Patch3][2] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-134 RADC_Tone Preserve Value_Mini[M][Patch3][3] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-135 RADC_Tone Preserve Value_Mini[M][Patch3][4] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-136 RADC_Tone Preserve Value_Mini[M][Patch4][0] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-137 RADC_Tone Preserve Value_Mini[M][Patch4][1] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-138 RADC_Tone Preserve Value_Mini[M][Patch4][2] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-139 RADC_Tone Preserve Value_Mini[M][Patch4][3] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-140 RADC_Tone Preserve Value_Mini[M][Patch4][4] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-141 RADC_Tone Preserve Value_Mini[C][Patch1][0] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-142 RADC_Tone Preserve Value_Mini[C][Patch1][1] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-143 RADC_Tone Preserve Value_Mini[C][Patch1][2] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-144 RADC_Tone Preserve Value_Mini[C][Patch1][3] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-145 RADC_Tone Preserve Value_Mini[C][Patch1][4] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-146 RADC_Tone Preserve Value_Mini[C][Patch2][0] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-147 RADC_Tone Preserve Value_Mini[C][Patch2][1] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-148 RADC_Tone Preserve Value_Mini[C][Patch2][2] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-149 RADC_Tone Preserve Value_Mini[C][Patch2][3] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-150 RADC_Tone Preserve Value_Mini[C][Patch2][4] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
 Table 1 NVM 753_Process Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
753-151 RADC_Tone Preserve Value_Mini[C][Patch3][0] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-152 RADC_Tone Preserve Value_Mini[C][Patch3][1] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-153 RADC_Tone Preserve Value_Mini[C][Patch3][2] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-154 RADC_Tone Preserve Value_Mini[C][Patch3][3] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-155 RADC_Tone Preserve Value_Mini[C][Patch3][4] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-156 RADC_Tone Preserve Value_Mini[C][Patch4][0] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-157 RADC_Tone Preserve Value_Mini[C][Patch4][1] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-158 RADC_Tone Preserve Value_Mini[C][Patch4][2] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-159 RADC_Tone Preserve Value_Mini[C][Patch4][3] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-160 RADC_Tone Preserve Value_Mini[C][Patch4][4] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-161 RADC_Tone Preserve Value_Mini[K][Patch1][0] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-162 RADC_Tone Preserve Value_Mini[K][Patch1][1] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-163 RADC_Tone Preserve Value_Mini[K][Patch1][2] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-164 RADC_Tone Preserve Value_Mini[K][Patch1][3] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-165 RADC_Tone Preserve Value_Mini[K][Patch1][4] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-166 RADC_Tone Preserve Value_Mini[K][Patch2][0] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-167 RADC_Tone Preserve Value_Mini[K][Patch2][1] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-168 RADC_Tone Preserve Value_Mini[K][Patch2][2] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-169 RADC_Tone Preserve Value_Mini[K][Patch2][3] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-170 RADC_Tone Preserve Value_Mini[K][Patch2][4] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-171 RADC_Tone Preserve Value_Mini[K][Patch3][0] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-172 RADC_Tone Preserve Value_Mini[K][Patch3][1] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-173 RADC_Tone Preserve Value_Mini[K][Patch3][2] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-174 RADC_Tone Preserve Value_Mini[K][Patch3][3] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-175 RADC_Tone Preserve Value_Mini[K][Patch3][4] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-176 RADC_Tone Preserve Value_Mini[K][Patch4][0] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-177 RADC_Tone Preserve Value_Mini[K][Patch4][1] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-178 RADC_Tone Preserve Value_Mini[K][Patch4][2] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-179 RADC_Tone Preserve Value_Mini[K][Patch4][3] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-180 RADC_Tone Preserve Value_Mini[K][Patch4][4] 0 0 1023 MiniSetup Completed ADC_Tone Preserve Value - O O
753-181 RADC_Tone Preserve Value_Mid/End[Y][Patch1][0] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-182 RADC_Tone Preserve Value_Mid/End[Y][Patch1][1] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-183 RADC_Tone Preserve Value_Mid/End[Y][Patch1][2] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-184 RADC_Tone Preserve Value_Mid/End[Y][Patch1][3] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-185 RADC_Tone Preserve Value_Mid/End[Y][Patch1][4] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-186 RADC_Tone Preserve Value_Mid/End[Y][Patch1][5] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-187 RADC_Tone Preserve Value_Mid/End[Y][Patch1][6] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-188 RADC_Tone Preserve Value_Mid/End[Y][Patch1][7] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O

Version 1.1 05/2014 6.3.14 NVM 753_Process Control 2 List

6-133
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-134 6.3.14 NVM 753_Process Control 2 List
Table 1 NVM 753_Process Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
753-189 RADC_Tone Preserve Value_Mid/End[Y][Patch1][8] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-190 RADC_Tone Preserve Value_Mid/End[Y][Patch1][9] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-191 RADC_Tone Preserve Value_Mid/End[Y][Patch2][0] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-192 RADC_Tone Preserve Value_Mid/End[Y][Patch2][1] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-193 RADC_Tone Preserve Value_Mid/End[Y][Patch2][2] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-194 RADC_Tone Preserve Value_Mid/End[Y][Patch2][3] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-195 RADC_Tone Preserve Value_Mid/End[Y][Patch2][4] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-196 RADC_Tone Preserve Value_Mid/End[Y][Patch2][5] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-197 RADC_Tone Preserve Value_Mid/End[Y][Patch2][6] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-198 RADC_Tone Preserve Value_Mid/End[Y][Patch2][7] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-199 RADC_Tone Preserve Value_Mid/End[Y][Patch2][8] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-200 RADC_Tone Preserve Value_Mid/End[Y][Patch2][9] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-201 RADC_Tone Preserve Value_Mid/End[Y][Patch3][0] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-202 RADC_Tone Preserve Value_Mid/End[Y][Patch3][1] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-203 RADC_Tone Preserve Value_Mid/End[Y][Patch3][2] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-204 RADC_Tone Preserve Value_Mid/End[Y][Patch3][3] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-205 RADC_Tone Preserve Value_Mid/End[Y][Patch3][4] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-206 RADC_Tone Preserve Value_Mid/End[Y][Patch3][5] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-207 RADC_Tone Preserve Value_Mid/End[Y][Patch3][6] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-208 RADC_Tone Preserve Value_Mid/End[Y][Patch3][7] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-209 RADC_Tone Preserve Value_Mid/End[Y][Patch3][8] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-210 RADC_Tone Preserve Value_Mid/End[Y][Patch3][9] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-211 RADC_Tone Preserve Value_Mid/End[Y][Patch4][0] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-212 RADC_Tone Preserve Value_Mid/End[Y][Patch4][1] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-213 RADC_Tone Preserve Value_Mid/End[Y][Patch4][2] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-214 RADC_Tone Preserve Value_Mid/End[Y][Patch4][3] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-215 RADC_Tone Preserve Value_Mid/End[Y][Patch4][4] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-216 RADC_Tone Preserve Value_Mid/End[Y][Patch4][5] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-217 RADC_Tone Preserve Value_Mid/End[Y][Patch4][6] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-218 RADC_Tone Preserve Value_Mid/End[Y][Patch4][7] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-219 RADC_Tone Preserve Value_Mid/End[Y][Patch4][8] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-220 RADC_Tone Preserve Value_Mid/End[Y][Patch4][9] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-221 RADC_Tone Preserve Value_Mid/End[M][Patch1][0] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-222 RADC_Tone Preserve Value_Mid/End[M][Patch1][1] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-223 RADC_Tone Preserve Value_Mid/End[M][Patch1][2] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-224 RADC_Tone Preserve Value_Mid/End[M][Patch1][3] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-225 RADC_Tone Preserve Value_Mid/End[M][Patch1][4] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-226 RADC_Tone Preserve Value_Mid/End[M][Patch1][5] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
 Table 1 NVM 753_Process Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
753-227 RADC_Tone Preserve Value_Mid/End[M][Patch1][6] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-228 RADC_Tone Preserve Value_Mid/End[M][Patch1][7] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-229 RADC_Tone Preserve Value_Mid/End[M][Patch1][8] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-230 RADC_Tone Preserve Value_Mid/End[M][Patch1][9] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-231 RADC_Tone Preserve Value_Mid/End[M][Patch2][0] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-232 RADC_Tone Preserve Value_Mid/End[M][Patch2][1] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-233 RADC_Tone Preserve Value_Mid/End[M][Patch2][2] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-234 RADC_Tone Preserve Value_Mid/End[M][Patch2][3] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-235 RADC_Tone Preserve Value_Mid/End[M][Patch2][4] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-236 RADC_Tone Preserve Value_Mid/End[M][Patch2][5] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-237 RADC_Tone Preserve Value_Mid/End[M][Patch2][6] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-238 RADC_Tone Preserve Value_Mid/End[M][Patch2][7] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-239 RADC_Tone Preserve Value_Mid/End[M][Patch2][8] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-240 RADC_Tone Preserve Value_Mid/End[M][Patch2][9] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-241 RADC_Tone Preserve Value_Mid/End[M][Patch3][0] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-242 RADC_Tone Preserve Value_Mid/End[M][Patch3][1] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-243 RADC_Tone Preserve Value_Mid/End[M][Patch3][2] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-244 RADC_Tone Preserve Value_Mid/End[M][Patch3][3] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-245 RADC_Tone Preserve Value_Mid/End[M][Patch3][4] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-246 RADC_Tone Preserve Value_Mid/End[M][Patch3][5] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-247 RADC_Tone Preserve Value_Mid/End[M][Patch3][6] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-248 RADC_Tone Preserve Value_Mid/End[M][Patch3][7] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-249 RADC_Tone Preserve Value_Mid/End[M][Patch3][8] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-250 RADC_Tone Preserve Value_Mid/End[M][Patch3][9] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-251 RADC_Tone Preserve Value_Mid/End[M][Patch4][0] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-252 RADC_Tone Preserve Value_Mid/End[M][Patch4][1] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-253 RADC_Tone Preserve Value_Mid/End[M][Patch4][2] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-254 RADC_Tone Preserve Value_Mid/End[M][Patch4][3] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-255 RADC_Tone Preserve Value_Mid/End[M][Patch4][4] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-256 RADC_Tone Preserve Value_Mid/End[M][Patch4][5] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-257 RADC_Tone Preserve Value_Mid/End[M][Patch4][6] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-258 RADC_Tone Preserve Value_Mid/End[M][Patch4][7] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-259 RADC_Tone Preserve Value_Mid/End[M][Patch4][8] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-260 RADC_Tone Preserve Value_Mid/End[M][Patch4][9] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-261 RADC_Tone Preserve Value_Mid/End[C][Patch1][0] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-262 RADC_Tone Preserve Value_Mid/End[C][Patch1][1] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-263 RADC_Tone Preserve Value_Mid/End[C][Patch1][2] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-264 RADC_Tone Preserve Value_Mid/End[C][Patch1][3] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O

Version 1.1 05/2014 6.3.14 NVM 753_Process Control 2 List

6-135
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-136 6.3.14 NVM 753_Process Control 2 List
Table 1 NVM 753_Process Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
753-265 RADC_Tone Preserve Value_Mid/End[C][Patch1][4] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-266 RADC_Tone Preserve Value_Mid/End[C][Patch1][5] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-267 RADC_Tone Preserve Value_Mid/End[C][Patch1][6] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-268 RADC_Tone Preserve Value_Mid/End[C][Patch1][7] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-269 RADC_Tone Preserve Value_Mid/End[C][Patch1][8] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-270 RADC_Tone Preserve Value_Mid/End[C][Patch1][9] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-271 RADC_Tone Preserve Value_Mid/End[C][Patch2][0] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-272 RADC_Tone Preserve Value_Mid/End[C][Patch2][1] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-273 RADC_Tone Preserve Value_Mid/End[C][Patch2][2] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-274 RADC_Tone Preserve Value_Mid/End[C][Patch2][3] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-275 RADC_Tone Preserve Value_Mid/End[C][Patch2][4] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-276 RADC_Tone Preserve Value_Mid/End[C][Patch2][5] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-277 RADC_Tone Preserve Value_Mid/End[C][Patch2][6] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-278 RADC_Tone Preserve Value_Mid/End[C][Patch2][7] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-279 RADC_Tone Preserve Value_Mid/End[C][Patch2][8] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-280 RADC_Tone Preserve Value_Mid/End[C][Patch2][9] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-281 RADC_Tone Preserve Value_Mid/End[C][Patch3][0] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-282 RADC_Tone Preserve Value_Mid/End[C][Patch3][1] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-283 RADC_Tone Preserve Value_Mid/End[C][Patch3][2] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-284 RADC_Tone Preserve Value_Mid/End[C][Patch3][3] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-285 RADC_Tone Preserve Value_Mid/End[C][Patch3][4] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-286 RADC_Tone Preserve Value_Mid/End[C][Patch3][5] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-287 RADC_Tone Preserve Value_Mid/End[C][Patch3][6] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-288 RADC_Tone Preserve Value_Mid/End[C][Patch3][7] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-289 RADC_Tone Preserve Value_Mid/End[C][Patch3][8] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-290 RADC_Tone Preserve Value_Mid/End[C][Patch3][9] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-291 RADC_Tone Preserve Value_Mid/End[C][Patch4][0] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-292 RADC_Tone Preserve Value_Mid/End[C][Patch4][1] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-293 RADC_Tone Preserve Value_Mid/End[C][Patch4][2] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-294 RADC_Tone Preserve Value_Mid/End[C][Patch4][3] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-295 RADC_Tone Preserve Value_Mid/End[C][Patch4][4] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-296 RADC_Tone Preserve Value_Mid/End[C][Patch4][5] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-297 RADC_Tone Preserve Value_Mid/End[C][Patch4][6] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-298 RADC_Tone Preserve Value_Mid/End[C][Patch4][7] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-299 RADC_Tone Preserve Value_Mid/End[C][Patch4][8] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-300 RADC_Tone Preserve Value_Mid/End[C][Patch4][9] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-301 RADC_Tone Preserve Value_Mid/End[K][Patch1][0] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-302 RADC_Tone Preserve Value_Mid/End[K][Patch1][1] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
 Table 1 NVM 753_Process Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
753-303 RADC_Tone Preserve Value_Mid/End[K][Patch1][2] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-304 RADC_Tone Preserve Value_Mid/End[K][Patch1][3] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-305 RADC_Tone Preserve Value_Mid/End[K][Patch1][4] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-306 RADC_Tone Preserve Value_Mid/End[K][Patch1][5] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-307 RADC_Tone Preserve Value_Mid/End[K][Patch1][6] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-308 RADC_Tone Preserve Value_Mid/End[K][Patch1][7] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-309 RADC_Tone Preserve Value_Mid/End[K][Patch1][8] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-310 RADC_Tone Preserve Value_Mid/End[K][Patch1][9] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-311 RADC_Tone Preserve Value_Mid/End[K][Patch2][0] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-312 RADC_Tone Preserve Value_Mid/End[K][Patch2][1] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-313 RADC_Tone Preserve Value_Mid/End[K][Patch2][2] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-314 RADC_Tone Preserve Value_Mid/End[K][Patch2][3] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-315 RADC_Tone Preserve Value_Mid/End[K][Patch2][4] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-316 RADC_Tone Preserve Value_Mid/End[K][Patch2][5] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-317 RADC_Tone Preserve Value_Mid/End[K][Patch2][6] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-318 RADC_Tone Preserve Value_Mid/End[K][Patch2][7] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-319 RADC_Tone Preserve Value_Mid/End[K][Patch2][8] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-320 RADC_Tone Preserve Value_Mid/End[K][Patch2][9] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-321 RADC_Tone Preserve Value_Mid/End[K][Patch3][0] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-322 RADC_Tone Preserve Value_Mid/End[K][Patch3][1] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-323 RADC_Tone Preserve Value_Mid/End[K][Patch3][2] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-324 RADC_Tone Preserve Value_Mid/End[K][Patch3][3] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-325 RADC_Tone Preserve Value_Mid/End[K][Patch3][4] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-326 RADC_Tone Preserve Value_Mid/End[K][Patch3][5] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-327 RADC_Tone Preserve Value_Mid/End[K][Patch3][6] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-328 RADC_Tone Preserve Value_Mid/End[K][Patch3][7] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-329 RADC_Tone Preserve Value_Mid/End[K][Patch3][8] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-330 RADC_Tone Preserve Value_Mid/End[K][Patch3][9] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-331 RADC_Tone Preserve Value_Mid/End[K][Patch4][0] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-332 RADC_Tone Preserve Value_Mid/End[K][Patch4][1] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-333 RADC_Tone Preserve Value_Mid/End[K][Patch4][2] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-334 RADC_Tone Preserve Value_Mid/End[K][Patch4][3] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-335 RADC_Tone Preserve Value_Mid/End[K][Patch4][4] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-336 RADC_Tone Preserve Value_Mid/End[K][Patch4][5] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-337 RADC_Tone Preserve Value_Mid/End[K][Patch4][6] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-338 RADC_Tone Preserve Value_Mid/End[K][Patch4][7] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-339 RADC_Tone Preserve Value_Mid/End[K][Patch4][8] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O
753-340 RADC_Tone Preserve Value_Mid/End[K][Patch4][9] 0 0 1023 Mid/EndSetup Completed ADC_Tone Preserve Value - O O

Version 1.1 05/2014 6.3.14 NVM 753_Process Control 2 List

6-137
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-138 6.3.14 NVM 753_Process Control 2 List
Table 1 NVM 753_Process Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
753-341 RADC_TC Preserve Value_Mini[Y][0] 0 0 1023 MiniSetup Completed ADC_TC Preserve Value - O O
753-342 RADC_TC Preserve Value_Mini[Y][1] 0 0 1023 MiniSetup Completed ADC_TC Preserve Value - O O
753-343 RADC_TC Preserve Value_Mini[Y][2] 0 0 1023 MiniSetup Completed ADC_TC Preserve Value - O O
753-344 RADC_TC Preserve Value_Mini[Y][3] 0 0 1023 MiniSetup Completed ADC_TC Preserve Value - O O
753-345 RADC_TC Preserve Value_Mini[Y][4] 0 0 1023 MiniSetup Completed ADC_TC Preserve Value - O O
753-346 RADC_TC Preserve Value_Mini[M][0] 0 0 1023 MiniSetup Completed ADC_TC Preserve Value - O O
753-347 RADC_TC Preserve Value_Mini[M][1] 0 0 1023 MiniSetup Completed ADC_TC Preserve Value - O O
753-348 RADC_TC Preserve Value_Mini[M][2] 0 0 1023 MiniSetup Completed ADC_TC Preserve Value - O O
753-349 RADC_TC Preserve Value_Mini[M][3] 0 0 1023 MiniSetup Completed ADC_TC Preserve Value - O O
753-350 RADC_TC Preserve Value_Mini[M][4] 0 0 1023 MiniSetup Completed ADC_TC Preserve Value - O O
753-351 RADC_TC Preserve Value_Mini[C][0] 0 0 1023 MiniSetup Completed ADC_TC Preserve Value - O O
753-352 RADC_TC Preserve Value_Mini[C][1] 0 0 1023 MiniSetup Completed ADC_TC Preserve Value - O O
753-353 RADC_TC Preserve Value_Mini[C][2] 0 0 1023 MiniSetup Completed ADC_TC Preserve Value - O O
753-354 RADC_TC Preserve Value_Mini[C][3] 0 0 1023 MiniSetup Completed ADC_TC Preserve Value - O O
753-355 RADC_TC Preserve Value_Mini[C][4] 0 0 1023 MiniSetup Completed ADC_TC Preserve Value - O O
753-356 RADC_TC Preserve Value_Mini[K][0] 0 0 1023 MiniSetup Completed ADC_TC Preserve Value - O O
753-357 RADC_TC Preserve Value_Mini[K][1] 0 0 1023 MiniSetup Completed ADC_TC Preserve Value - O O
753-358 RADC_TC Preserve Value_Mini[K][2] 0 0 1023 MiniSetup Completed ADC_TC Preserve Value - O O
753-359 RADC_TC Preserve Value_Mini[K][3] 0 0 1023 MiniSetup Completed ADC_TC Preserve Value - O O
753-360 RADC_TC Preserve Value_Mini[K][4] 0 0 1023 MiniSetup Completed ADC_TC Preserve Value - O O
753-361 RADC_TC Preserve Value_Mid/End[Y][0] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-362 RADC_TC Preserve Value_Mid/End[Y][1] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-363 RADC_TC Preserve Value_Mid/End[Y][2] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-364 RADC_TC Preserve Value_Mid/End[Y][3] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-365 RADC_TC Preserve Value_Mid/End[Y][4] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-366 RADC_TC Preserve Value_Mid/End[Y][5] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-367 RADC_TC Preserve Value_Mid/End[Y][6] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-368 RADC_TC Preserve Value_Mid/End[Y][7] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-369 RADC_TC Preserve Value_Mid/End[Y][8] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-370 RADC_TC Preserve Value_Mid/End[Y][9] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-371 RADC_TC Preserve Value_Mid/End[M][0] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-372 RADC_TC Preserve Value_Mid/End[M][1] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-373 RADC_TC Preserve Value_Mid/End[M][2] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-374 RADC_TC Preserve Value_Mid/End[M][3] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-375 RADC_TC Preserve Value_Mid/End[M][4] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-376 RADC_TC Preserve Value_Mid/End[M][5] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-377 RADC_TC Preserve Value_Mid/End[M][6] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-378 RADC_TC Preserve Value_Mid/End[M][7] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
 Table 1 NVM 753_Process Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
753-379 RADC_TC Preserve Value_Mid/End[M][8] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-380 RADC_TC Preserve Value_Mid/End[M][9] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-381 RADC_TC Preserve Value_Mid/End[C][0] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-382 RADC_TC Preserve Value_Mid/End[C][1] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-383 RADC_TC Preserve Value_Mid/End[C][2] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-384 RADC_TC Preserve Value_Mid/End[C][3] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-385 RADC_TC Preserve Value_Mid/End[C][4] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-386 RADC_TC Preserve Value_Mid/End[C][5] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-387 RADC_TC Preserve Value_Mid/End[C][6] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-388 RADC_TC Preserve Value_Mid/End[C][7] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-389 RADC_TC Preserve Value_Mid/End[C][8] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-390 RADC_TC Preserve Value_Mid/End[C][9] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-391 RADC_TC Preserve Value_Mid/End[K][0] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-392 RADC_TC Preserve Value_Mid/End[K][1] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-393 RADC_TC Preserve Value_Mid/End[K][2] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-394 RADC_TC Preserve Value_Mid/End[K][3] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-395 RADC_TC Preserve Value_Mid/End[K][4] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-396 RADC_TC Preserve Value_Mid/End[K][5] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-397 RADC_TC Preserve Value_Mid/End[K][6] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-398 RADC_TC Preserve Value_Mid/End[K][7] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-399 RADC_TC Preserve Value_Mid/End[K][8] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-400 RADC_TC Preserve Value_Mid/End[K][9] 0 0 1023 Mid/EndSetup Completed ADC_TC Preserve Value - O O
753-401 Vdeve_PCON Preserve Value_Mini[Y][0] 0 0 1023 MiniSetup Completed Vdeve_PCON Preserve Value - O O
753-402 Vdeve_PCON Preserve Value_Mini[Y][1] 0 0 1023 MiniSetup Completed Vdeve_PCON Preserve Value - O O
753-403 Vdeve_PCON Preserve Value_Mini[Y][2] 0 0 1023 MiniSetup Completed Vdeve_PCON Preserve Value - O O
753-404 Vdeve_PCON Preserve Value_Mini[Y][3] 0 0 1023 MiniSetup Completed Vdeve_PCON Preserve Value - O O
753-405 Vdeve_PCON Preserve Value_Mini[Y][4] 0 0 1023 MiniSetup Completed Vdeve_PCON Preserve Value - O O
753-406 Vdeve_PCON Preserve Value_Mini[M][0] 0 0 1023 MiniSetup Completed Vdeve_PCON Preserve Value - O O
753-407 Vdeve_PCON Preserve Value_Mini[M][1] 0 0 1023 MiniSetup Completed Vdeve_PCON Preserve Value - O O
753-408 Vdeve_PCON Preserve Value_Mini[M][2] 0 0 1023 MiniSetup Completed Vdeve_PCON Preserve Value - O O
753-409 Vdeve_PCON Preserve Value_Mini[M][3] 0 0 1023 MiniSetup Completed Vdeve_PCON Preserve Value - O O
753-410 Vdeve_PCON Preserve Value_Mini[M][4] 0 0 1023 MiniSetup Completed Vdeve_PCON Preserve Value - O O
753-411 Vdeve_PCON Preserve Value_Mini[C][0] 0 0 1023 MiniSetup Completed Vdeve_PCON Preserve Value - O O
753-412 Vdeve_PCON Preserve Value_Mini[C][1] 0 0 1023 MiniSetup Completed Vdeve_PCON Preserve Value - O O
753-413 Vdeve_PCON Preserve Value_Mini[C][2] 0 0 1023 MiniSetup Completed Vdeve_PCON Preserve Value - O O
753-414 Vdeve_PCON Preserve Value_Mini[C][3] 0 0 1023 MiniSetup Completed Vdeve_PCON Preserve Value - O O
753-415 Vdeve_PCON Preserve Value_Mini[C][4] 0 0 1023 MiniSetup Completed Vdeve_PCON Preserve Value - O O
753-416 Vdeve_PCON Preserve Value_Mini[K][0] 0 0 1023 MiniSetup Completed Vdeve_PCON Preserve Value - O O

Version 1.1 05/2014 6.3.14 NVM 753_Process Control 2 List

6-139
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-140 6.3.14 NVM 753_Process Control 2 List
Table 1 NVM 753_Process Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
753-417 Vdeve_PCON Preserve Value_Mini[K][1] 0 0 1023 MiniSetup Completed Vdeve_PCON Preserve Value - O O
753-418 Vdeve_PCON Preserve Value_Mini[K][2] 0 0 1023 MiniSetup Completed Vdeve_PCON Preserve Value - O O
753-419 Vdeve_PCON Preserve Value_Mini[K][3] 0 0 1023 MiniSetup Completed Vdeve_PCON Preserve Value - O O
753-420 Vdeve_PCON Preserve Value_Mini[K][4] 0 0 1023 MiniSetup Completed Vdeve_PCON Preserve Value - O O
753-421 Vdeve_PCON Preserve Value_Mid/End[Y][0] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-422 Vdeve_PCON Preserve Value_Mid/End[Y][1] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-423 Vdeve_PCON Preserve Value_Mid/End[Y][2] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-424 Vdeve_PCON Preserve Value_Mid/End[Y][3] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-425 Vdeve_PCON Preserve Value_Mid/End[Y][4] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-426 Vdeve_PCON Preserve Value_Mid/End[Y][5] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-427 Vdeve_PCON Preserve Value_Mid/End[Y][6] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-428 Vdeve_PCON Preserve Value_Mid/End[Y][7] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-429 Vdeve_PCON Preserve Value_Mid/End[Y][8] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-430 Vdeve_PCON Preserve Value_Mid/End[Y][9] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-431 Vdeve_PCON Preserve Value_Mid/End[M][0] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-432 Vdeve_PCON Preserve Value_Mid/End[M][1] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-433 Vdeve_PCON Preserve Value_Mid/End[M][2] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-434 Vdeve_PCON Preserve Value_Mid/End[M][3] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-435 Vdeve_PCON Preserve Value_Mid/End[M][4] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-436 Vdeve_PCON Preserve Value_Mid/End[M][5] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-437 Vdeve_PCON Preserve Value_Mid/End[M][6] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-438 Vdeve_PCON Preserve Value_Mid/End[M][7] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-439 Vdeve_PCON Preserve Value_Mid/End[M][8] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-440 Vdeve_PCON Preserve Value_Mid/End[M][9] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-441 Vdeve_PCON Preserve Value_Mid/End[C][0] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-442 Vdeve_PCON Preserve Value_Mid/End[C][1] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-443 Vdeve_PCON Preserve Value_Mid/End[C][2] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-444 Vdeve_PCON Preserve Value_Mid/End[C][3] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-445 Vdeve_PCON Preserve Value_Mid/End[C][4] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-446 Vdeve_PCON Preserve Value_Mid/End[C][5] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-447 Vdeve_PCON Preserve Value_Mid/End[C][6] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-448 Vdeve_PCON Preserve Value_Mid/End[C][7] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-449 Vdeve_PCON Preserve Value_Mid/End[C][8] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-450 Vdeve_PCON Preserve Value_Mid/End[C][9] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-451 Vdeve_PCON Preserve Value_Mid/End[K][0] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-452 Vdeve_PCON Preserve Value_Mid/End[K][1] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-453 Vdeve_PCON Preserve Value_Mid/End[K][2] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-454 Vdeve_PCON Preserve Value_Mid/End[K][3] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
 Table 1 NVM 753_Process Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
753-455 Vdeve_PCON Preserve Value_Mid/End[K][4] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-456 Vdeve_PCON Preserve Value_Mid/End[K][5] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-457 Vdeve_PCON Preserve Value_Mid/End[K][6] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-458 Vdeve_PCON Preserve Value_Mid/End[K][7] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-459 Vdeve_PCON Preserve Value_Mid/End[K][8] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-460 Vdeve_PCON Preserve Value_Mid/End[K][9] 0 0 1023 Mid/EndSetup Completed Vdeve_PCON Preserve Value - O O
753-461 ADC_Tone_Cin Preserve Value_Mini[Y][Patch1][0] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-462 ADC_Tone_Cin Preserve Value_Mini[Y][Patch1][1] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-463 ADC_Tone_Cin Preserve Value_Mini[Y][Patch1][2] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-464 ADC_Tone_Cin Preserve Value_Mini[Y][Patch1][3] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-465 ADC_Tone_Cin Preserve Value_Mini[Y][Patch1][4] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-466 ADC_Tone_Cin Preserve Value_Mini[Y][Patch2][0] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-467 ADC_Tone_Cin Preserve Value_Mini[Y][Patch2][1] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-468 ADC_Tone_Cin Preserve Value_Mini[Y][Patch2][2] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-469 ADC_Tone_Cin Preserve Value_Mini[Y][Patch2][3] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-470 ADC_Tone_Cin Preserve Value_Mini[Y][Patch2][4] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-471 ADC_Tone_Cin Preserve Value_Mini[Y][Patch3][0] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-472 ADC_Tone_Cin Preserve Value_Mini[Y][Patch3][1] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-473 ADC_Tone_Cin Preserve Value_Mini[Y][Patch3][2] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-474 ADC_Tone_Cin Preserve Value_Mini[Y][Patch3][3] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-475 ADC_Tone_Cin Preserve Value_Mini[Y][Patch3][4] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-476 ADC_Tone_Cin Preserve Value_Mini[Y][Patch4][0] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-477 ADC_Tone_Cin Preserve Value_Mini[Y][Patch4][1] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-478 ADC_Tone_Cin Preserve Value_Mini[Y][Patch4][2] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-479 ADC_Tone_Cin Preserve Value_Mini[Y][Patch4][3] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-480 ADC_Tone_Cin Preserve Value_Mini[Y][Patch4][4] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-481 ADC_Tone_Cin Preserve Value_Mini[M][Patch1][0] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-482 ADC_Tone_Cin Preserve Value_Mini[M][Patch1][1] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-483 ADC_Tone_Cin Preserve Value_Mini[M][Patch1][2] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-484 ADC_Tone_Cin Preserve Value_Mini[M][Patch1][3] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-485 ADC_Tone_Cin Preserve Value_Mini[M][Patch1][4] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-486 ADC_Tone_Cin Preserve Value_Mini[M][Patch2][0] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-487 ADC_Tone_Cin Preserve Value_Mini[M][Patch2][1] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-488 ADC_Tone_Cin Preserve Value_Mini[M][Patch2][2] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-489 ADC_Tone_Cin Preserve Value_Mini[M][Patch2][3] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-490 ADC_Tone_Cin Preserve Value_Mini[M][Patch2][4] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-491 ADC_Tone_Cin Preserve Value_Mini[M][Patch3][0] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-492 ADC_Tone_Cin Preserve Value_Mini[M][Patch3][1] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O

Version 1.1 05/2014 6.3.14 NVM 753_Process Control 2 List

6-141
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-142 6.3.14 NVM 753_Process Control 2 List
Table 1 NVM 753_Process Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
753-493 ADC_Tone_Cin Preserve Value_Mini[M][Patch3][2] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-494 ADC_Tone_Cin Preserve Value_Mini[M][Patch3][3] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-495 ADC_Tone_Cin Preserve Value_Mini[M][Patch3][4] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-496 ADC_Tone_Cin Preserve Value_Mini[M][Patch4][0] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-497 ADC_Tone_Cin Preserve Value_Mini[M][Patch4][1] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-498 ADC_Tone_Cin Preserve Value_Mini[M][Patch4][2] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-499 ADC_Tone_Cin Preserve Value_Mini[M][Patch4][3] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-500 ADC_Tone_Cin Preserve Value_Mini[M][Patch4][4] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-501 ADC_Tone_Cin Preserve Value_Mini[C][Patch1][0] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-502 ADC_Tone_Cin Preserve Value_Mini[C][Patch1][1] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-503 ADC_Tone_Cin Preserve Value_Mini[C][Patch1][2] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-504 ADC_Tone_Cin Preserve Value_Mini[C][Patch1][3] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-505 ADC_Tone_Cin Preserve Value_Mini[C][Patch1][4] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-506 ADC_Tone_Cin Preserve Value_Mini[C][Patch2][0] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-507 ADC_Tone_Cin Preserve Value_Mini[C][Patch2][1] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-508 ADC_Tone_Cin Preserve Value_Mini[C][Patch2][2] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-509 ADC_Tone_Cin Preserve Value_Mini[C][Patch2][3] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-510 ADC_Tone_Cin Preserve Value_Mini[C][Patch2][4] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-511 ADC_Tone_Cin Preserve Value_Mini[C][Patch3][0] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-512 ADC_Tone_Cin Preserve Value_Mini[C][Patch3][1] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-513 ADC_Tone_Cin Preserve Value_Mini[C][Patch3][2] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-514 ADC_Tone_Cin Preserve Value_Mini[C][Patch3][3] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-515 ADC_Tone_Cin Preserve Value_Mini[C][Patch3][4] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-516 ADC_Tone_Cin Preserve Value_Mini[C][Patch4][0] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-517 ADC_Tone_Cin Preserve Value_Mini[C][Patch4][1] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-518 ADC_Tone_Cin Preserve Value_Mini[C][Patch4][2] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-519 ADC_Tone_Cin Preserve Value_Mini[C][Patch4][3] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-520 ADC_Tone_Cin Preserve Value_Mini[C][Patch4][4] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-521 ADC_Tone_Cin Preserved Value_Mini[K][Patch1][0] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-522 ADC_Tone_Cin Preserved Value_Mini[K][Patch1][1] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-523 ADC_Tone_Cin Preserved Value_Mini[K][Patch1][2] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-524 ADC_Tone_Cin Preserved Value_Mini[K][Patch1][3] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-525 ADC_Tone_Cin Preserved Value_Mini[K][Patch1][4] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-526 ADC_Tone_Cin Preserve Value_Mini[K][Patch2][0] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-527 ADC_Tone_Cin Preserve Value_Mini[K][Patch2][1] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-528 ADC_Tone_Cin Preserve Value_Mini[K][Patch2][2] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-529 ADC_Tone_Cin Preserve Value_Mini[K][Patch2][3] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-530 ADC_Tone_Cin Preserve Value_Mini[K][Patch2][4] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
 Table 1 NVM 753_Process Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
753-531 ADC_Tone_Cin Preserve Value_Mini[K][Patch3][0] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-532 ADC_Tone_Cin Preserve Value_Mini[K][Patch3][1] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-533 ADC_Tone_Cin Preserve Value_Mini[K][Patch3][2] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-534 ADC_Tone_Cin Preserve Value_Mini[K][Patch3][3] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-535 ADC_Tone_Cin Preserve Value_Mini[K][Patch3][4] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-536 ADC_Tone_Cin Preserve Value_Mini[K][Patch4][0] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-537 ADC_Tone_Cin Preserve Value_Mini[K][Patch4][1] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-538 ADC_Tone_Cin Preserve Value_Mini[K][Patch4][2] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-539 ADC_Tone_Cin Preserve Value_Mini[K][Patch4][3] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-540 ADC_Tone_Cin Preserve Value_Mini[K][Patch4][4] 0 0 255 MiniSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-541 ADC_Tone_Cin Preserve Value_Mid/End[Y][Patch1][0] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-542 ADC_Tone_Cin Preserve Value_Mid/End[Y][Patch1][1] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-543 ADC_Tone_Cin Preserve Value_Mid/End[Y][Patch1][2] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-544 ADC_Tone_Cin Preserve Value_Mid/End[Y][Patch1][3] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-545 ADC_Tone_Cin Preserve Value_Mid/End[Y][Patch1][4] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-546 ADC_Tone_Cin Preserve_Mid/End[Y][Patch2][0] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-547 ADC_Tone_Cin Preserve_Mid/End[Y][Patch2][1] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-548 ADC_Tone_Cin Preserve_Mid/End[Y][Patch2][2] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-549 ADC_Tone_Cin Preserve_Mid/End[Y][Patch2][3] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-550 ADC_Tone_Cin Preserve_Mid/End[Y][Patch2][4] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-551 ADC_Tone_Cin Preserve Value_Mid/End[Y][Patch3][0] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-552 ADC_Tone_Cin Preserve Value_Mid/End[Y][Patch3][1] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-553 ADC_Tone_Cin Preserve Value_Mid/End[Y][Patch3][2] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-554 ADC_Tone_Cin Preserve Value_Mid/End[Y][Patch3][3] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-555 ADC_Tone_Cin Preserve Value_Mid/End[Y][Patch3][4] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-556 ADC_Tone_Cin Preserve Value_Mid/End[Y][Patch4][0] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-557 ADC_Tone_Cin Preserve Value_Mid/End[Y][Patch4][1] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-558 ADC_Tone_Cin Preserve Value_Mid/End[Y][Patch4][2] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-559 ADC_Tone_Cin Preserve Value_Mid/End[Y][Patch4][3] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-560 ADC_Tone_Cin Preserve Value_Mid/End[Y][Patch4][4] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-561 ADC_Tone_Cin Preserve Value_Mid/End[M][Patch1][0] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-562 ADC_Tone_Cin Preserve Value_Mid/End[M][Patch1][1] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-563 ADC_Tone_Cin Preserve Value_Mid/End[M][Patch1][2] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-564 ADC_Tone_Cin Preserve Value_Mid/End[M][Patch1][3] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-565 ADC_Tone_Cin Preserve Value_Mid/End[M][Patch1][4] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-566 ADC_Tone_Cin Preserve Value_Mid/End[M][Patch2][0] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-567 ADC_Tone_Cin Preserve Value_Mid/End[M][Patch2][1] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-568 ADC_Tone_Cin Preserve Value_Mid/End[M][Patch2][2] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O

Version 1.1 05/2014 6.3.14 NVM 753_Process Control 2 List

6-143
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-144 6.3.14 NVM 753_Process Control 2 List
Table 1 NVM 753_Process Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
753-569 ADC_Tone_Cin Preserve Value_Mid/End[M][Patch2][3] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-570 ADC_Tone_Cin Preserve Value_Mid/End[M][Patch2][4] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-571 ADC_Tone_Cin Preserve Value_Mid/End[M][Patch3][0] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-572 ADC_Tone_Cin Preserve Value_Mid/End[M][Patch3][1] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-573 ADC_Tone_Cin Preserve Value_Mid/End[M][Patch3][2] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-574 ADC_Tone_Cin Preserve Value_Mid/End[M][Patch3][3] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-575 ADC_Tone_Cin Preserve Value_Mid/End[M][Patch3][4] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-576 ADC_Tone_Cin Preserve Value_Mid/End[M][Patch4][0] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-577 ADC_Tone_Cin Preserve Value_Mid/End[M][Patch4][1] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-578 ADC_Tone_Cin Preserve Value_Mid/End[M][Patch4][2] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-579 ADC_Tone_Cin Preserve Value_Mid/End[M][Patch4][3] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-580 ADC_Tone_Cin Preserve Value_Mid/End[M][Patch4][4] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-581 ADC_Tone_Cin Preserve Value_Mid/End[C][Patch1][0] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-582 ADC_Tone_Cin Preserve Value_Mid/End[C][Patch1][1] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-583 ADC_Tone_Cin Preserve Value_Mid/End[C][Patch1][2] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-584 ADC_Tone_Cin Preserve Value_Mid/End[C][Patch1][3] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-585 ADC_Tone_Cin Preserve Value_Mid/End[C][Patch1][4] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-586 ADC_Tone_Cin Preserve Value_Mid/End[C][Patch2][0] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-587 ADC_Tone_Cin Preserve Value_Mid/End[C][Patch2][1] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-588 ADC_Tone_Cin Preserve Value_Mid/End[C][Patch2][2] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-589 ADC_Tone_Cin Preserve Value_Mid/End[C][Patch2][3] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-590 ADC_Tone_Cin Preserve Value_Mid/End[C][Patch2][4] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-591 ADC_Tone_Cin Preserve Value_Mid/End[C][Patch3][0] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-592 ADC_Tone_Cin Preserve Value_Mid/End[C][Patch3][1] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-593 ADC_Tone_Cin Preserve Value_Mid/End[C][Patch3][2] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-594 ADC_Tone_Cin Preserve Value_Mid/End[C][Patch3][3] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-595 ADC_Tone_Cin Preserve Value_Mid/End[C][Patch3][4] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-596 ADC_Tone_Cin Preserve Value_Mid/End[C][Patch4][0] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-597 ADC_Tone_Cin Preserve Value_Mid/End[C][Patch4][1] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-598 ADC_Tone_Cin Preserve Value_Mid/End[C][Patch4][2] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-599 ADC_Tone_Cin Preserve Value_Mid/End[C][Patch4][3] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-600 ADC_Tone_Cin Preserve Value_Mid/End[C][Patch4][4] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-601 ADC_Tone_Cin Preserve Value_Mid/End[K][Patch1][0] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-602 ADC_Tone_Cin Preserve Value_Mid/End[K][Patch1][1] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-603 ADC_Tone_Cin Preserve Value_Mid/End[K][Patch1][2] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-604 ADC_Tone_Cin Preserve Value_Mid/End[K][Patch1][3] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-605 ADC_Tone_Cin Preserve Value_Mid/End[K][Patch1][4] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-606 ADC_Tone_Cin Preserve Value_Mid/End[K][Patch2][0] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
 Table 1 NVM 753_Process Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
753-607 ADC_Tone_Cin Preserve Value_Mid/End[K][Patch2][1] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-608 ADC_Tone_Cin Preserve Value_Mid/End[K][Patch2][2] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-609 ADC_Tone_Cin Preserve Value_Mid/End[K][Patch2][3] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-610 ADC_Tone_Cin Preserve Value_Mid/End[K][Patch2][4] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-611 ADC_Tone_Cin Preserve Value_Mid/End[K][Patch3][0] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-612 ADC_Tone_Cin Preserve Value_Mid/End[K][Patch3][1] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-613 ADC_Tone_Cin Preserve Value_Mid/End[K][Patch3][2] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-614 ADC_Tone_Cin Preserve Value_Mid/End[K][Patch3][3] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-615 ADC_Tone_Cin Preserve Value_Mid/End[K][Patch3][4] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-616 ADC_Tone_Cin Preserve Value_Mid/End[K][Patch4][0] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-617 ADC_Tone_Cin Preserve Value_Mid/End[K][Patch4][1] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-618 ADC_Tone_Cin Preserve Value_Mid/End[K][Patch4][2] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-619 ADC_Tone_Cin Preserve Value_Mid/End[K][Patch4][3] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-620 ADC_Tone_Cin Preserve Value_Mid/End[K][Patch4][4] 0 0 255 Mid/EndSetup Completed ADC_Tone Patch Cin Preserve Value - O O
753-621 D2[Y] 0 0 4294967295 Toner Supply Error Determine Value - O O
753-622 D2[M] 0 0 4294967295 Toner Supply Error Determine Value - O O
753-623 D2[C] 0 0 4294967295 Toner Supply Error Determine Value - O O
753-624 D2[K] 0 0 4294967295 Toner Supply Error Determine Value - O O
753-625 Filling Toner Amount Threshold Value1[Y] 80 0 65535 Threshold Value of Filling Toner Amount of Toner Cartridge 1[g] O O
753-626 Filling Toner Amount Threshold Value1[M] 80 0 65535 Threshold Value of Filling Toner Amount of Toner Cartridge 1[g] O O
753-627 Filling Toner Amount Threshold Value1[C] 80 0 65535 Threshold Value of Filling Toner Amount of Toner Cartridge 1[g] O O
753-628 Filling Toner Amount Threshold Value1[K] 80 0 65535 Threshold Value of Filling Toner Amount of Toner Cartridge 1[g] O O
753-629 Filling Toner Amount Threshold Value2[Y] 160 0 65535 Threshold Value of Filling Toner Amount of Toner Cartridge 1[g] O O
753-630 Filling Toner Amount Threshold Value2[M] 160 0 65535 Threshold Value of Filling Toner Amount of Toner Cartridge 1[g] O O
753-631 Filling Toner Amount Threshold Value2[C] 160 0 65535 Threshold Value of Filling Toner Amount of Toner Cartridge 1[g] O O
753-632 Filling Toner Amount Threshold Value2[K] 160 0 65535 Threshold Value of Filling Toner Amount of Toner Cartridge 1[g] O O
753-633 Disp Request Time_Recovery Filling Amount1[Y] 10 -128 127 Initial Recovery Disp Time according to CTRG Filling Amount 1[sec] O O
753-634 Disp Request Time_Recovery Filling Amount1[M] 10 -128 127 Initial Recovery Disp Time according to CTRG Filling Amount 1[sec] O O
753-635 Disp Request Time _Recovery Filling Amount1[C] 10 -128 127 Initial Recovery Disp Time according to CTRG Filling Amount 1[sec] O O
753-636 Disp Request Time_Recovery Filling Amount1[K] 10 -128 127 Initial Recovery Disp Time according to CTRG Filling Amount 1[sec] O O
753-637 Disp Request Time_Recovery Filling Amount2[Y] 5 -128 127 Initial Recovery Disp Time according to CTRG Filling Amount 1[sec] O O
753-638 Disp Request Time_Recovery Filling Amount2[M] 5 -128 127 Initial Recovery Disp Time according to CTRG Filling Amount 1[sec] O O
753-639 Disp Request Time_Recovery Filling Amount2[C] 5 -128 127 Initial Recovery Disp Time according to CTRG Filling Amount 1[sec] O O
753-640 Disp Request Time_Recovery Filling Amount2[K] 5 -128 127 Initial Recovery Disp Time according to CTRG Filling Amount 1[sec] O O
753-641 Disp Request Time_Recovery Filling Amount3[Y] 2 -128 127 Initial Recovery Disp Time according to CTRG Filling Amount 1[sec] O O
753-642 Disp Request Time_Recovery Filling Amount3[M] 2 -128 127 Initial Recovery Disp Time according to CTRG Filling Amount 1[sec] O O
753-643 Disp Request Time_Recovery Filling Amount3[C] 2 -128 127 Initial Recovery Disp Time according to CTRG Filling Amount 1[sec] O O
753-644 Disp Request Time_Recovery Filling Amount3[K] 2 -128 127 Initial Recovery Disp Time according to CTRG Filling Amount 1[sec] O O

Version 1.1 05/2014 6.3.14 NVM 753_Process Control 2 List

6-145
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-146 6.3.14 NVM 753_Process Control 2 List
Table 1 NVM 753_Process Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
753-645 Recovery Adjustment No. Maximum Value_Small Filling 4 0 255 Maximum No. of Retry for Small Filling CTRG Recovery - O O
753-646 ADC_Vcln_Patch Size 0 0 1023 ADC_Vcln Output Mean of Patch Size Vclean - O O
753-647 ADC Sensor Contamination State Counter 0 0 65535 ADC Sensor Contamination State Counter - O O
753-648 ADC Sensor Warning Counter_TC Patch[Y] 0 0 65535 ADC Sensor Warning Counter due to TC Patch Fail - O O
753-649 ADC Sensor Warning Counter_TC Patch[M] 0 0 65535 ADC Sensor Warning Counter due to TC Patch Fail - O O
753-650 ADC Sensor Warning Counter_TC Patch[C] 0 0 65535 ADC Sensor Warning Counter due to TC Patch Fail - O O
753-651 ADC Sensor Warning Counter_TC Patch[K] 0 0 65535 ADC Sensor Warning Counter due to TC Patch Fail - O O
753-652 Disp Switch SW in Image Profile LIFE 0 0 1 Disp Switch SW in Image Profile LIFE - O O
753-653 Delta RADC_Tone_Target Deve Correction Amount 0 -1024 1023 Delta RADC_Tone_Deve Correction Amount of Target Value - O O
[Y][Patch1]
753-654 Delta RADC_Tone_Target Deve Correction Amount 0 -1024 1023 Delta RADC_Tone_Deve Correction Amount of Target Value - O O
[Y][Patch2]
753-655 Delta RADC_Tone_Target Deve Correction Amount 0 -1024 1023 Delta RADC_Tone_Deve Correction Amount of Target Value - O O
[Y][Patch3]
753-656 Delta RADC_Tone_Target Deve Correction Amount 0 -1024 1023 Delta RADC_Tone_Deve Correction Amount of Target Value - O O
[Y][Patch4]
753-657 Delta RADC_Tone_Target Deve Correction Amount 0 -1024 1023 Delta RADC_Tone_Deve Correction Amount of Target Value - O O
[M][Patch1]
753-658 Delta RADC_Tone_Target Deve Correction Amount 0 -1024 1023 Delta RADC_Tone_Deve Correction Amount of Target Value - O O
[M][Patch2]
753-659 Delta RADC_Tone_Target Deve Correction Amount 0 -1024 1023 Delta RADC_Tone_Deve Correction Amount of Target Value - O O
[M][Patch3]
753-660 Delta RADC_Tone_Target Deve Correction Amount 0 -1024 1023 Delta RADC_Tone_Deve Correction Amount of Target Value - O O
[M][Patch4]
753-661 Delta RADC_Tone_Target Deve Correction Amount 0 -1024 1023 Delta RADC_Tone_Deve Correction Amount of Target Value - O O
[C][Patch1]
753-662 Delta RADC_Tone_Target Deve Correction Amount 0 -1024 1023 Delta RADC_Tone_Deve Correction Amount of Target Value - O O
[C][Patch2]
753-663 Delta RADC_Tone_Target Deve Correction Amount 0 -1024 1023 Delta RADC_Tone_Deve Correction Amount of Target Value - O O
[C][Patch3]
753-664 Delta RADC_Tone_Target Deve Correction Amount 0 -1024 1023 Delta RADC_Tone_Deve Correction Amount of Target Value - O O
[C][Patch4]
753-665 Delta RADC_Tone_Target Deve Correction Amount 0 -1024 1023 Delta RADC_Tone_Deve Correction Amount of Target Value - O O
j[K][Patch1]
753-666 Delta RADC_Tone_Target Deve Correction Amount 0 -1024 1023 Delta RADC_Tone_Deve Correction Amount of Target Value - O O
[K][Patch2]
753-667 Delta RADC_Tone_Target Deve Correction Amount 0 -1024 1023 Delta RADC_Tone_Deve Correction Amount of Target Value - O O
[K][Patch3]
753-668 Delta RADC_Tone_Target Deve Correction Amount 0 -1024 1023 Delta RADC_Tone_Deve Correction Amount of Target Value - O O
[K][Patch4]
 Table 1 NVM 753_Process Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
753-669 Delta RADC_Tone_Target PR Correction Amount 0 -1024 1023 Delta RADC_Tone_PR Correction Amount of Target Value - O O
[Y][Patch1]
753-670 Delta RADC_Tone_Target PR Correction Amount 0 -1024 1023 Delta RADC_Tone_PR Correction Amount of Target Value - O O
[Y][Patch2]
753-671 Delta RADC_Tone_Target PR Correction Amount 0 -1024 1023 Delta RADC_Tone_PR Correction Amount of Target Value - O O
[Y][Patch3]
753-672 Delta RADC_Tone_Target PR Correction Amount 0 -1024 1023 Delta RADC_Tone_PR Correction Amount of Target Value - O O
[Y][Patch4]
753-673 Delta RADC_Tone_Target PR Correction Amount 0 -1024 1023 Delta RADC_Tone_PR Correction Amount of Target Value - O O
[M][Patch1]
753-674 Delta RADC_Tone_Target PR Correction Amount 0 -1024 1023 Delta RADC_Tone_PR Correction Amount of Target Value - O O
[M][Patch2]
753-675 Delta RADC_Tone_Target PR Correction 0 -1024 1023 Delta RADC_Tone_PR Correction Amount of Target Value - O O
Amount[M][Patch3]
753-676 Delta RADC_Tone_Target PR Correction Amount 0 -1024 1023 Delta RADC_Tone_PR Correction Amount of Target Value - O O
[M][Patch4]
753-677 Delta RADC_Tone_Target PR Correction Amount 0 -1024 1023 Delta RADC_Tone_PR Correction Amount of Target Value - O O
[C][Patch1]
753-678 Delta RADC_Tone_Target PR Correction Amount 0 -1024 1023 Delta RADC_Tone_PR Correction Amount of Target Value - O O
[C][Patch2]
753-679 Delta RADC_Tone_Target PR Correction Amount 0 -1024 1023 Delta RADC_Tone_PR Correction Amount of Target Value - O O
[C][Patch3]
753-680 Delta RADC_Tone_Target PR Correction Amount 0 -1024 1023 Delta RADC_Tone_PR Correction Amount of Target Value - O O
[C][Patch4]
753-681 Delta RADC_Tone_Target PR Correction Amount 0 -1024 1023 Delta RADC_Tone_PR Correction Amount of Target Value - O O
[K][Patch1]
753-682 Delta RADC_Tone_Target PR Correction Amount 0 -1024 1023 Delta RADC_Tone_PR Correction Amount of Target Value - O O
[K][Patch2]
753-683 Delta RADC_Tone_Target PR Correction Amount 0 -1024 1023 Delta RADC_Tone_PR Correction Amount of Target Value - O O
[K][Patch3]
753-684 Delta RADC_Tone_Target PR Correction Amount 0 -1024 1023 Delta RADC_Tone_PR Correction Amount of Target Value - O O
[K][Patch4]
753-685 LPH_OUT Upper Limit Value [Y][PS0] 1232 0 2046 LPH_OUT Upper Limit Value - O O
753-686 LPH_OUT Upper Limit Value [Y][PS1] 1232 0 2046 LPH_OUT Upper Limit Value - O O
753-687 LPH_OUT Upper Limit Value [M][PS0] 1232 0 2046 LPH_OUT Upper Limit Value - O O
753-688 LPH_OUT Upper Limit Value [M][PS1] 1232 0 2046 LPH_OUT Upper Limit Value - O O
753-689 LPH_OUT Upper Limit Value [C][PS0] 1232 0 2046 LPH_OUT Upper Limit Value - O O
753-690 LPH_OUT Upper Limit Value [C][PS1] 1232 0 2046 LPH_OUT Upper Limit Value - O O
753-691 LPH_OUT Upper Limit Value [K][PS0] 1232 0 2046 LPH_OUT Upper Limit Value - O O
753-692 LPH_OUT Upper Limit Value [K][PS1] 1232 0 2046 LPH_OUT Upper Limit Value - O O
753-693 Refill Determine Threshold Value [Y] 3000 0 65535 Refill Determine Disp Time Threshold Value 1[sec] O O

Version 1.1 05/2014 6.3.14 NVM 753_Process Control 2 List

6-147
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-148 6.3.14 NVM 753_Process Control 2 List
Table 1 NVM 753_Process Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
753-694 Refill Determine Threshold Value [M] 3000 0 65535 Refill Determine Disp Time Threshold Value 1[sec] O O
753-695 Refill Determine Threshold Value [C] 3000 0 65535 Refill Determine Disp Time Threshold Value 1[sec] O O
753-696 Refill Determine Threshold Value [K] 3000 0 65535 Refill Determine Disp Time Threshold Value 1[sec] O O
753-697 FlagRefill_CST[Y] 0 0 1 Flag Refill in Custom Mode (0: Normal, 1: Refill) - O O
753-698 FlagRefill_CST[M] 0 0 1 Flag Refill in Custom Mode (0: Normal, 1: Refill) - O O
753-699 FlagRefill_CST[C] 0 0 1 Flag Refill in Custom Mode (0: Normal, 1: Refill) - O O
753-700 FlagRefill_CST[K] 0 0 1 Flag Refill in Custom Mode (0: Normal, 1: Refill) - O O
753-705 DispMotorFail[Y] 0 0 1 Dispense Motor Fail - O O
753-706 DispMotorFail[M] 0 0 1 Dispense Motor Fail - O O
753-707 DispMotorFail[C] 0 0 1 Dispense Motor Fail - O O
753-708 DispMotorFail[K] 0 0 1 Dispense Motor Fail - O O
753-709 Dispense Motor Revolution Time 135 40 3000 Revolution Opening of Dispense Motor of DC330 Component Con- - O O
trol
Time from Start to Auto Stop (Common YMCK)[10ms]
753-710 Toner Band ICDC[Y] 0 0 65535 Toner Band ICDC in relevant Setup Panel - O O
753-711 Toner Band ICDC[M] 0 0 65535 Toner Band ICDC in relevant Setup Panel - O O
753-712 Toner Band ICDC[C] 0 0 65535 Toner Band ICDC in relevant Setup Panel - O O
753-713 Toner Band ICDC[K] 0 0 65535 Toner Band ICDC in relevant Setup Panel - O O
753-714 Toner Full Filling Amount [Y] 290 0 1023 Filling amount when filling up full Toner Cartridge - O X
753-715 Toner Full Filling Amount [M] 290 0 1023 Filling amount when filling up full Toner Cartridge - O X
753-716 Toner Full Filling Amount [C] 290 0 1023 Filling amount when filling up full Toner Cartridge - O X
753-717 Toner Full Filling Amount [K] 290 0 1023 Filling amount when filling up full Toner Cartridge - O X
6.3.15 NVM 755_Process Control 4 List
Table 1 NVM 755_Process Control 4 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
755-001 ADC Sensor System Fail 0 0 1 ADC Sensor System Fail - O O
755-002 ADC Sensor Fail 0 0 1 ADC Sensor Fail - O O
755-003 ADC Potential Patch Fail [Y] 0 0 1 ADC Potential Patch Fail - O O
755-004 ADC Potential Patch Fail [M] 0 0 1 ADC Potential Patch Fail - O O
755-005 ADC Potential Patch Fail [C] 0 0 1 ADC Potential Patch Fail - O O
755-006 ADC Potential Patch Fail [K] 0 0 1 ADC Potential Patch Fail - O O
755-007 ADC Tone Patch Fail [Y][Patch1] 0 0 1 ADC Tone Patch Fail - O O
755-008 ADC Tone Patch Fail [Y][Patch2] 0 0 1 ADC Tone Patch Fail - O O
755-009 ADC Tone Patch Fail [Y][Patch3] 0 0 1 ADC Tone Patch Fail - O O
755-010 ADC Tone Patch Fail [Y][Patch4] 0 0 1 ADC Tone Patch Fail - O O
755-011 ADC Tone Patch Fail[M][Patch1] 0 0 1 ADC Tone Patch Fail - O O
755-012 ADC Tone Patch Fail[M][Patch2] 0 0 1 ADC Tone Patch Fail - O O
755-013 ADC Tone Patch Fail[M][Patch3] 0 0 1 ADC Tone Patch Fail - O O
755-014 ADC Tone Patch Fail[M][Patch4] 0 0 1 ADC Tone Patch Fail - O O
755-015 ADC Tone Patch Fail[C][Patch1] 0 0 1 ADC Tone Patch Fail - O O
755-016 ADC tone Patch Fail[C][Patch2] 0 0 1 ADC Tone Patch Fail - O O
755-017 ADC Tone Patch Fail[C][Patch3] 0 0 1 ADC Tone Patch Fail - O O
755-018 ADC Tone Patch Fail[C][Patch4] 0 0 1 ADC Tone Patch Fail - O O
755-019 ADC Tone Patch Fail[K][Patch1] 0 0 1 ADC Tone Patch Fail - O O
755-020 ADC Tone Patch Fail[K][Patch2] 0 0 1 ADC Tone Patch Fail - O O
755-021 ADC Tone Patch Fail[K][Patch3] 0 0 1 ADC Tone Patch Fail - O O
755-022 ADC Tone Patch Fail[K][Patch4] 0 0 1 ADC Tone Patch Fail - O O
755-023 ADC_TC Patch Fail[Y] 0 0 1 ADC_TC Patch Fail - O O
755-024 ADC_TC Patch Fail[M] 0 0 1 ADC_TC Patch Fail - O O
755-025 ADC_TC Patch Fail[C] 0 0 1 ADC_TC Patch Fail - O O
755-026 ADC_TC Patch Fail[K] 0 0 1 ADC_TC Patch Fail - O O
755-027 Flag Empty Detection Status [Y] 0 0 3 Flag Empty Detection Status (0: Normal, 1: PreNear, 2: NearEmpty, 3: - O O
Empty)
755-028 Flag Empty Detection Status [M] 0 0 3 Flag Empty Detection Status (0: Normal, 1: PreNear, 2: NearEmpty, 3: - O O
Empty)
755-029 Flag Empty Detection Status [C] 0 0 3 Flag Empty Detection Status (0: Normal, 1: PreNear, 2: NearEmpty, 3: - O O
Empty)
755-030 Flag Empty Detection Status [K] 0 0 3 Flag Empty Detection Status (0: Normal, 1: PreNear, 2: NearEmpty, 3: - O O
Empty)
755-031 Flag ADC Empty Detection Status [Y] 0 0 3 Empty Detection Status due to ADC (0: Normal, 1: Performing Empty - O O
Detection Count, 2: NearEmpty, 3: Empty)

Version 1.1 05/2014 6.3.15 NVM 755_Process Control 4 List

6-149
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-150 6.3.15 NVM 755_Process Control 4 List
Table 1 NVM 755_Process Control 4 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
755-032 Flag ADC Empty Detection Status[M] 0 0 3 Empty Detection Status due to ADC (0: Normal, 1: Performing Empty - O O
Detection Count, 2: NearEmpty, 3: Empty)
755-033 FlagADC Empty Detection Status [C] 0 0 3 Empty Detection Status due to ADC (0: Normal, 1: Performing Empty - O O
Detection Count, 2: NearEmpty, 3: Empty)
755-034 FlagADC Empty Detection Status [K] 0 0 3 Empty Detection Status due to ADC (0: Normal, 1: Performing Empty - O O
Detection Count, 2: NearEmpty, 3: Empty)
755-035 ADC_Vcln Create Flag 0 0 2 Flag to determine whether to create Vcln or not for each Setup Vcln (0: - O O
Normal and No Change, 1: Create Mid/End_Vcln, 2: Create Mid/End/
TC_Vcln)
755-036 Continuous Setup Execution after Flag_Mini 0 0 1 Continuous Setup Execution after Flag_Mini (0: Do not Execute, 1: Exe- - O O
cute)
755-037 Flag_Low/HighAC[Y] 0 0 1 MidEndSetup Performance Flag during Low->High AC - O O
755-038 Flag_Low/HighAC[M] 0 0 1 MidEndSetup Performance Flag during Low->High AC - O O
755-039 Flag_Low/HighAC[C] 0 0 1 MidEndSetup Performance Flag during Low->High AC - O O
755-040 Flag_Low/HighAC[K] 0 0 1 MidEndSetup Performance Flag during Low->High AC - O O
755-041 Perform Flag_RDP Correction 1[Y] 0 0 1 Perform Flag_RDP Correction 1 (For Disp) - O O
755-042 Perform Flag_RDP Correction 1[M] 0 0 1 Perform Flag_RDP Correction 1 (For Disp) - O O
755-043 Perform Flag_RDP Correction 1[C] 0 0 1 Perform Flag_RDP Correction 1 (For Disp) - O O
755-044 Perform Flag_RDP Correction 1[K] 0 0 1 Perform Flag_RDP Correction 1 (For Disp) - O O
755-045 Perform Flag_RDP Correction 2[Y] 0 0 1 Perform Flag_RDP Correction 2 (For PV) - O O
755-046 Perform Flag_RDP Correction 2[M] 0 0 1 Perform Flag_RDP Correction 2 (For PV) - O O
755-047 Perform Flag_RDP Correction 2[C] 0 0 1 Perform Flag_RDP Correction 2 (For PV) - O O
755-048 Perform Flag_RDP Correction 2[K] 0 0 1 Perform Flag_RDP Correction 2 (For PV) - O O
755-049 Disp Excess Flag[Y] 0 0 1 Disp Excess Flag - O O
755-050 Disp Excess Flag[M] 0 0 1 Disp Excess Flag - O O
755-051 Disp Excess Flag[C] 0 0 1 Disp Excess Flag - O O
755-052 Disp Excess Flag[K] 0 0 1 Disp Excess Flag - O O
755-053 Disp Shortage Flag[Y] 0 0 1 Disp Shortage Flag - O O
755-054 Disp Shortage Flag[M] 0 0 1 Disp Shortage Flag - O O
755-055 Disp Shortage Flag[C] 0 0 1 Disp Shortage Flag - O O
755-056 Disp Shortage Flag[K] 0 0 1 Disp Shortage Flag - O O
755-057 Flag_Vdeve Bounds [Y][Current] 0 0 1 Vdeve Limit Restriction Status Flag - O O
755-058 Flag_Vdeve Limit [Y][Last] 0 0 1 Vdeve Limit Restriction Status Flag - O O
755-059 Flag_Vdeve Limit [M][Current] 0 0 1 Vdeve Limit Restriction Status Flag - O O
755-060 Flag_Vdeve Limit [M][Current] 0 0 1 Vdeve Limit Restriction Status Flag - O O
755-061 Flag_Vdeve Limit [C][Current] 0 0 1 Vdeve Limit Restriction Status Flag - O O
755-062 Flag_Vdeve Limit [C][Last] 0 0 1 Vdeve Limit Restriction Status Flag - O O
755-063 Flag_Vdeve Limit [K][Current] 0 0 1 Vdeve Limit Restriction Status Flag - O O
755-064 Flag_Vdeve Limit [K][Last] 0 0 1 Vdeve Limit Restriction Status Flag - O O
 Table 1 NVM 755_Process Control 4 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
755-065 FlagRefill[Y] 0 0 1 0: Normal, 1: Refill - O O
755-066 FlagRefill[M] 0 0 1 0: Normal, 1: Refill - O O
755-067 FlagRefill[C] 0 0 1 0: Normal, 1: Refill - O O
755-068 FlagRefill[K] 0 0 1 0: Normal, 1: Refill - O O
755-069 Flag Installation [Y] 0 0 1 Installation Flag for conducting Toner Conveyance Path Filling - O O
0: Other than Installation Status, 1: Installation Status
755-070 Flag Installation [M] 0 0 1 Installation Flag for conducting Toner Conveyance Path Filling - O O
0: Other than Installation Status, 1: Installation Status
755-071 Flag Installation [C] 0 0 1 Installation Flag for conducting Toner Conveyance Path Filling - O O
0: Other than Installation Status, 1: Installation Status
755-072 Flag Installation [K] 0 0 1 Installation Flag for conducting Toner Conveyance Path Filling - O O
0: Other than Installation Status, 1: Installation Status
755-073 Flag_NewTonerCTRG[Y] 0 0 1 0: Old Toner Cartridge, 1: New Toner Cartridge - O O
755-074 Flag_NewTonerCTRG[M] 0 0 1 0: Old Toner Cartridge, 1: New Toner Cartridge - O O
755-075 Flag_NewTonerCTRG[C] 0 0 1 0: Old Toner Cartridge, 1: New Toner Cartridge - O O
755-076 Flag_NewTonerCTRG[K] 0 0 1 0: Old Toner Cartridge, 1: New Toner Cartridge - O O
755-077 Flag_TonerCTRG Replacement [Y] 0 0 1 Toner Cartridge Replacement Flag - O O
755-078 Flag_TonerCTRG Replacement [M] 0 0 1 Toner Cartridge Replacement Flag - O O
755-079 Flag_TonerCTRG Replacement [C] 0 0 1 Toner Cartridge Replacement Flag - O O
755-080 Flag_TonerCTRG Replacement [K] 0 0 1 Toner Cartridge Replacement Flag - O O
755-081 Flag Recovery Success [Y] 0 0 1 Flag Recovery Success - O O
755-082 Flag Recovery Success [M] 0 0 1 Flag Recovery Success - O O
755-083 Flag Recovery Success [C] 0 0 1 Flag Recovery Success - O O
755-084 Flag Recovery Success [K] 0 0 1 Flag Recovery Success - O O
755-085 Recovering Flag [Y] 0 0 1 Flag to determine whether the Recovery Operation was completed nor- - O O
mally or not
755-086 Recovering Flag [M] 0 0 1 Flag to determine whether the Recovery Operation was completed nor- - O O
mally or not
755-087 Recovering Flag [C] 0 0 1 Flag to determine whether the Recovery Operation was completed nor- - O O
mally or not
755-088 Recovering Flag [K] 0 0 1 Flag to determine whether the Recovery Operation was completed nor- - O O
mally or not
755-089 Flag_Toner Indication 0 0 1 Flag to determine the EP Connection (0: UI the Consumable Indication - O O
(No EP Connection), 1: Sensor notify the Consumable Indication (With
EP Connection))
755-090 No. of MiniSetup_Entry [BW] 0 0 10 Remaining No. of Execution of MiniSetup - O O
755-091 No. of MiniSetup_Entry [FC] 0 0 10 Remaining No. of Execution of MiniSetup - O O
755-092 MiniSetup_No. of Continuous Execution [BW] 0 0 10 No. of Continuous Execution of MiniSetup - O O
755-093 MiniSetup_No. of Continuous Execution [FC] 0 0 10 No. of Continuous Execution of MiniSetup - O O
755-094 PV for creating ADC_Mid/End[YMC] 0 0 65535 PV for determining Mid/EndSetup Patch creation - O O

Version 1.1 05/2014 6.3.15 NVM 755_Process Control 4 List

6-151
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-152 6.3.15 NVM 755_Process Control 4 List
Table 1 NVM 755_Process Control 4 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
755-095 PV for creating ADC_Mid/End[K] 0 0 65535 PV for determining Mid/EndSetup Patch creation - O O
755-096 PV for creating ADC_TC[YMC] 0 0 65535 PV for determining TCSetup Patch creation - O O
755-097 PV for creating ADC_TC[K] 0 0 65535 PV for determining TCSetup Patch creation - O O
755-098 ICDC Integrated Value for ADC [Y] 0 0 10000000 ICDC Count Integrated Value between ADC_Mini/Mid/End Patch - O O
755-099 ICDC Integrated Value for ADC [M] 0 0 10000000 ICDC Count Integrated Value between ADC_Mini/Mid/End Patch - O O
755-100 ICDC Integrated Value for ADC [C] 0 0 10000000 ICDC Count Integrated Value between ADC_Mini/Mid/End Patch - O O
755-101 ICDC Integrated Value for ADC [K] 0 0 10000000 ICDC Count Integrated Value between ADC_Mini/Mid/End Patch - O O
755-102 ICDC Integrated Value for ADC_TC[Y] 0 0 10000000 ICDC Count Integrated Value between ADC_TC Patch - O O
755-103 ICDC Integrated Value for ADC_TC[M] 0 0 10000000 ICDC Count Integrated Value between ADC_TC Patch - O O
755-104 ICDC Integrated Value for ADC_TC[C] 0 0 10000000 ICDC Count Integrated Value between ADC_TC Patch - O O
755-105 ICDC Integrated Value for ADC_TC[K] 0 0 10000000 ICDC Count Integrated Value between ADC_TC Patch - O O
755-106 ICDC Move Mean Integrated Value [Minor- 0 0 67042305 The ICDC moving average integrated value obtained using an algorithm - O O
ity][Y] similar to moving average
755-107 ICDC Move Mean Integrated Value [Minor- 0 0 67042305 The ICDC moving average integrated value obtained using an algorithm - O O
ity][M] similar to moving average
755-108 ICDC Move Mean Integrated Value [Minor- 0 0 67042305 The ICDC moving average integrated value obtained using an algorithm - O O
ity][C] similar to moving average
755-109 ICDC Move Mean Integrated Value [Minor- 0 0 67042305 The ICDC moving average integrated value obtained using an algorithm - O O
ity][K] similar to moving average
755-110 ICDC Move Mean Integrated Value [Major][Y] 0 0 67042305 The ICDC moving average integrated value obtained using an algorithm - O O
similar to moving average
755-111 ICDC Move Mean Integrated Value [Major][M] 0 0 67042305 The ICDC moving average integrated value obtained using an algorithm - O O
similar to moving average
755-112 ICDC Move Mean Integrated Value [Major][C] 0 0 67042305 The ICDC moving average integrated value obtained using an algorithm - O O
similar to moving average
755-113 ICDC Move Mean Integrated Value [Major][K] 0 0 67042305 The ICDC moving average integrated value obtained using an algorithm - O O
similar to moving average
755-114 Delta Temperature 0 -128 127 Delta Temperature - O O
755-115 Delta Temperature_Setup[BW] 0 -128 127 Delta Temperature during Setup - O O
755-116 Delta Temperature_Setup[FC] 0 -128 127 Delta Temperature during Setup - O O
755-117 Delta Humidity 0 -128 127 Delta Humidity - O O
755-118 Delta Humidity_Setup[BW] 0 -128 127 Delta Humidity during Setup - O O
755-119 Delta Humidity_Setup[FC] 0 -128 127 Delta Humidity during Setup - O O
755-120 Delta Absolute Humidity 0 -1024 1023 Delta Absolute Humidity (times 10 value) - O O
755-121 Delta Humidity_Setup Performing Requirement 0 -128 127 Delta Humidity_Setup Performing Requirement - O O
755-122 Delta Humidity_Target Value 0 -128 127 Delta Humidity_Target Value - O O
755-123 Delta Humidity_Disp 0 -128 127 Delta Humidity_Disp - O O
755-124 Delta Humidity_Potential 0 -128 127 Delta Humidity_Potential - O O
755-125 Delta Humidity_Device 0 -128 127 Delta Humidity_Device - O O
 Table 1 NVM 755_Process Control 4 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
755-126 ADC_Vdark 0 0 1023 ADC Dark Current Output - O O
755-127 ADC_Vcln_All Mean Value 0 0 1023 Output Mean Value of ADC_Vcln Belt 1 Lap - O O
755-128 Delta RADC_Potential_Target Dmax Correc- 0 -1024 1023 Dmax Correction Amount of RADC_Potential_Standard Target Value - O O
tion Amount[Y]
755-129 Delta RADC_Potential_Target Dmax Correc- 0 -1024 1023 Dmax Correction Amount of RADC_Potential_Standard Target Value - O O
tion Amount [M]
755-130 Delta RADC_Potential_Target Dmax Correc- 0 -1024 1023 Dmax Correction Amount of RADC_Potential_Standard Target Value - O O
tion Amount [C]
755-131 Delta RADC_Potential_Target Dmax Correc- 0 -1024 1023 Dmax Correction Amount of RADC_Potential_Standard Target Value - O O
tion Amount [K]
755-132 Delta RADC_TC_Target Dmax Correction 0 -1024 1023 Dmax Correction Amount of RADC_TC_Standard Target Value - O O
Amount [Y]
755-133 Delta RADC_TC_Target Dmax Correction 0 -1024 1023 Dmax Correction Amount of RADC_TC_Standard Target Value - O O
Amount M]
755-134 Delta RADC_TC_Target Dmax Correction 0 -1024 1023 Dmax Correction Amount of RADC_TC_Standard Target Value - O O
Amount [C]
755-135 Delta RADC_TC_Target Dmax Correction 0 -1024 1023 Dmax Correction Amount of RADC_TC_Standard Target Value - O O
Amount [K]
755-136 Delta RADC_TC_Target AC Correction 0 -32768 32767 Delta RADC_TC_Target AC Correction Amount - O O
Amount [Y]
755-137 Delta RADC_TC_Target AC Correction 0 -32768 32767 Delta RADC_TC_Target AC Correction Amount - O O
Amount [M]
755-138 Delta RADC_TC_Target AC Correction 0 -32768 32767 Delta RADC_TC_Target AC Correction Amount - O O
Amount [C]
755-139 Delta RADC_TC_Target AC Correction 0 -32768 32767 Delta RADC_TC_Target AC Correction Amount - O O
Amount [K]
755-140 Delta RADC_TC_Target Vdeve Correction 0 -1024 1023 Delta RADC_TC_Target Vdeve Correction Amount - O O
Amount [Y]
755-141 Delta RADC_TC_Target Vdeve Correction 0 -1024 1023 Delta RADC_TC_Target Vdeve Correction Amount - O O
Amount [M]
755-142 Delta RADC_TC_Target Vdeve Correction 0 -1024 1023 Delta RADC_TC_Target Vdeve Correction Amount - O O
Amount [C]
755-143 Delta RADC_TC_Target Vdeve Correction 0 -1024 1023 Delta RADC_TC_Target Vdeve Correction Amount - O O
Amount [K]
755-144 Delta RADC_TC_Target RDP Correction 0 -1024 1023 Delta RADC_TC_Target RDP Correction Amount - O O
Amount [Y]
755-145 Delta RADC_TC_Target RDP Correction 0 -1024 1023 Delta RADC_TC_Target RDP Correction Amount - O O
Amount [M]
755-146 Delta RADC_TC_Target RDP Correction 0 -1024 1023 Delta RADC_TC_Target RDP Correction Amount - O O
Amount [C]

Version 1.1 05/2014 6.3.15 NVM 755_Process Control 4 List

6-153
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-154 6.3.15 NVM 755_Process Control 4 List
Table 1 NVM 755_Process Control 4 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
755-147 Delta RADC_TC_Target RDP Correction 0 -1024 1023 Delta RADC_TC_Target RDP Correction Amount - O O
Amount [K]
755-148 Delta RADC_TC_Target Toner Refill Control 0 -1024 1023 Delta RADC_TC_Target Toner Refill Control Correction Amount - O O
Correction Amount [Y]
755-149 Delta RADC_TC_Target Toner Refill Control 0 -1024 1023 Delta RADC_TC_Target Toner Refill Control Correction Amount - O O
Correction Amount [M]
755-150 Delta RADC_TC_Target Toner Refill Control 0 -1024 1023 Delta RADC_TC_Target Toner Refill Control Correction Amount - O O
Correction Amount [C]
755-151 Delta RADC_TC_Target Toner Refill Control 0 -1024 1023 Delta RADC_TC_Target Toner Refill Control Correction Amount - O O
Correction Amount [K]
755-152 Disp Time Integrated Value for RDP Value Cal- 0 0 4294967295 Disp Time Integrated Value for RDP Value Calculation - O O
culation [Y][Current]
755-153 Disp Time Integrated Value for RDP Value Cal- 0 0 4294967295 Disp Time Integrated Value for RDP Value Calculation - O O
culation [Y][Last]
755-154 Disp Time Integrated Value for RDP Value Cal- 0 0 4294967295 Disp Time Integrated Value for RDP Value Calculation - O O
culation [M][Current]
755-155 Disp Time Integrated Value for RDP Value Cal- 0 0 4294967295 Disp Time Integrated Value for RDP Value Calculation - O O
culation [M][Last]
755-156 Disp Time Integrated Value for RDP Value Cal- 0 0 4294967295 Disp Time Integrated Value for RDP Value Calculation - O O
culation [C][Current]
755-157 Disp Time Integrated Value for RDP Value Cal- 0 0 4294967295 Disp Time Integrated Value for RDP Value Calculation - O O
culation [C][Last]
755-158 Disp Time Integrated Value for RDP Value Cal- 0 0 4294967295 Disp Time Integrated Value for RDP Value Calculation - O O
culation [K][Current]
755-159 Disp Time Integrated Value for RDP Value Cal- 0 0 4294967295 Disp Time Integrated Value for RDP Value Calculation - O O
culation [K][Last]
755-160 ICDC for Disp [Y] 0 0 65535 ICDC Count Value for Dispense - O O
755-161 Disp ICDC[M] 0 0 65535 ICDC Count Value for Dispense - O O
755-162 Disp ICDC[C] 0 0 65535 ICDC Count Value for Dispense - O O
755-163 Disp ICDC[K] 0 0 65535 ICDC Count Value for Dispense - O O
755-164 Disp Request TIme_Buffer[Y] 0 -32768 200000 Buffer Value of Toner Refill Request Time 1[ms] O O
755-165 Disp Request Time_Buffer[M] 0 -32768 200000 Buffer Value of Toner Refill Request Time 1[ms] O O
755-166 Disp Request Time_Buffer[C] 0 -32768 200000 Buffer Value of Toner Refill Request Time 1[ms] O O
755-167 Disp Request Time_Buffer[K] 0 -32768 200000 Buffer Value of Toner Refill Request Time 1[ms] O O
755-168 Disp Request Time_PCON[Y] 0 -32768 200000 Toner Refill Request Time from ADC Control 1[ms] O O
755-169 Disp Request Time_PCON[M] 0 -32768 200000 Toner Refill Request Time from ADC Control 1[ms] O O
755-170 Disp Request Time_PCON[C] 0 -32768 200000 Toner Refill Request Time from ADC Control 1[ms] O O
755-171 Disp Request Time_PCON[K] 0 -32768 200000 Toner Refill Request Time from ADC Control 1[ms] O O
755-172 DispMotor Rotation Direction [CK] 0 0 3 DispenseMotor Rotation Direction (Last: 1st bit, Current 0 bit) - O O
755-173 DispMotor Rotation Direction [YM] 0 0 3 DispenseMotor Rotation Direction (Last: 1st bit, Current 0 bit) - O O
 Table 1 NVM 755_Process Control 4 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
755-174 Disp Drive Setting Time [Y] 0 0 30000 Dispense Drive Setting Time 1[ms] O O
755-175 Disp Drive Setting Time [M] 0 0 30000 Dispense Drive Setting Time 1[ms] O O
755-176 Disp Drive Setting Time [C] 0 0 30000 Dispense Drive Setting Time 1[ms] O O
755-177 Disp Drive Setting Time [K] 0 0 30000 Dispense Drive Setting Time 1[ms] O O
755-178 Disp True Drive Time [Y] 0 0 30000 Dispense True Drive Time 1[ms] O O
755-179 Disp True Drive Time [M] 0 0 30000 Dispense True Drive Time 1[ms] O O
755-180 Disp True Drive Time [C] 0 0 30000 Dispense True Drive Time 1[ms] O O
755-181 Disp True Drive Time [K] 0 0 30000 Dispense True Drive Time 1[ms] O O
755-182 PCON_Disp Split Counter [Y] 0 0 255 PCON_Disp Split Counter - O O
755-183 PCON_Disp Split Counter [M] 0 0 255 PCON_Disp Split Counter - O O
755-184 PCON_Disp Split Counter [C] 0 0 255 PCON_Disp Split Counter - O O
755-185 PCON_Disp Split Counter [K] 0 0 255 PCON_Disp Split Counter - O O
755-186 No. of PCON_Disp Split [Y] 0 0 255 No. of PCON_Disp Split - O O
755-187 No. of PCON_Disp Split [M] 0 0 255 No. of PCON_Disp Split - O O
755-188 No. of PCON_Disp Split [C] 0 0 255 No. of PCON_Disp Split - O O
755-189 No. of PCON_Disp Split [K] 0 0 255 No. of PCON_Disp Split - O O
755-190 PCON_Disp Split Time [Y] 0 -32768 32767 PCON Toner Refill Split Time 1[ms] O O
755-191 PCON_Disp Split Time [M] 0 -32768 32767 PCON Toner Refill Split Time 1[ms] O O
755-192 PCON_Disp Split Time [C] 0 -32768 32767 PCON Toner Refill Split Time 1[ms] O O
755-193 PCON_Disp Split Time [K] 0 -32768 32767 PCON Toner Refill Split Time 1[ms] O O
755-194 PV_Mini for PCON_Disp Correction [YMC] 0 0 255 PCON_Disp Correcting PV after MiniSetup - O O
755-195 PCON_Disp Correcting PV_Mini[K] 0 0 255 PCON_Disp Correcting PV after MiniSetup - O O
755-196 PCON_Disp Correcting PV_PS[YMC] 0 0 255 PCON_Disp Correcting PV after PS change - O O
755-197 PCON_Disp Correcting PV_PS[K] 0 0 255 PCON_Disp Correcting PV after PS change - O O
755-198 Pixel_Disp Lower Limit [Y] 0 0 4294967295 Lower Limit Value of Disp Time Integrated Value for Toner Refill Deter- 1[ms] O O
mination
755-199 Pixel_Disp Lower Limit [M] 0 0 4294967295 Lower Limit Value of Disp Time Integrated Value for Toner Refill Deter- 1[ms] O O
mination
755-200 Pixel_Disp Lower Limit [C] 0 0 4294967295 Lower Limit Value of Disp Time Integrated Value for Toner Refill Deter- 1[ms] O O
mination
755-201 Pixel_Disp Lower Limit [K] 0 0 4294967295 Lower Limit Value of Disp Time Integrated Value for Toner Refill Deter- 1[ms] O O
mination
755-202 Pixel_Disp Upper Limit [Y] 4294967295 0 4294967295 Upper Limit Value of Disp Time Integrated Value for Toner Refill Deter- 1[ms] O O
mination
755-203 Pixel_Disp Upper Limit [M] 4294967295 0 4294967295 Upper Limit Value of Disp Time Integrated Value for Toner Refill Deter- 1[ms] O O
mination
755-204 Pixel_Disp Upper Limit [C] 4294967295 0 4294967295 Upper Limit Value of Disp Time Integrated Value for Toner Refill Deter- 1[ms] O O
mination

Version 1.1 05/2014 6.3.15 NVM 755_Process Control 4 List

6-155
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-156 6.3.15 NVM 755_Process Control 4 List
Table 1 NVM 755_Process Control 4 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
755-205 Pixel_Disp Upper Limit [K] 4294967295 0 4294967295 Upper Limit Value of Disp Time Integrated Value for Toner Refill Deter- 1[ms] O O
mination
755-206 Pixel_Disp Correction Ctrg Offset [Positive][Y] 0 - 2147483647 Upper/Lower Limit (Absolute Value) of tilt by Cartridge of Disp TIme - O O
2147483648 towards the ICDC1000count
755-207 Pixel_Disp Correction Ctrg Offset [Positive][M] 0 - 2147483647 Upper/Lower Limit (Absolute Value) of tilt by Cartridge of Disp TIme - O O
2147483648 towards the ICDC1000count
755-208 Pixel_Disp Correction Ctrg Offset [Positive][C] 0 - 2147483647 Upper/Lower Limit (Absolute Value) of tilt by Cartridge of Disp TIme - O O
2147483648 towards the ICDC1000count
755-209 Pixel_Disp Correction Ctrg Offset [Positive][K] 0 - 2147483647 Upper/Lower Limit (Absolute Value) of tilt by Cartridge of Disp TIme - O O
2147483648 towards the ICDC1000count
755-210 Pixel_Disp Correction Ctrg Offset [Negative][Y] 0 - 2147483647 Upper/Lower Limit (Absolute Value) of tilt by Cartridge of Disp TIme - O O
2147483648 towards the ICDC1000count
755-211 Pixel_Disp Correction Ctrg Offset [Nega- 0 - 2147483647 Upper/Lower Limit (Absolute Value) of tilt by Cartridge of Disp TIme - O O
tive][M] 2147483648 towards the ICDC1000count
755-212 Pixel_Disp Correction Ctrg Offset [Negative][C] 0 - 2147483647 Upper/Lower Limit (Absolute Value) of tilt by Cartridge of Disp TIme - O O
2147483648 towards the ICDC1000count
755-213 Pixel_Disp Correction Ctrg Offset [Negative][K] 0 - 2147483647 Upper/Lower Limit (Absolute Value) of tilt by Cartridge of Disp TIme - O O
2147483648 towards the ICDC1000count
755-214 Disp Time Integrated Value for Toner Refill 0 0 4294967295 Disp Time Integrated Value for Toner Refill Determination 1[ms] O O
Determination[Y]
755-215 Disp Time Integrated Value for Toner Refill 0 0 4294967295 Disp Time Integrated Value for Toner Refill Determination 1[ms] O O
Determination[M]
755-216 Disp Time Integrated Value for Toner Refill 0 0 4294967295 Disp Time Integrated Value for Toner Refill Determination 1[ms] O O
Determination[C]
755-217 Disp Time Integrated Value for Toner Refill 0 0 4294967295 Disp Time Integrated Value for Toner Refill Determination 1[ms] O O
Determination[K]
755-218 Disp Environment Correction Coefficient [Y] 128 1 255 Environment Correction Coefficient of DispRate - O O
755-219 Disp Environment Correction Coefficient [M] 128 1 255 Environment Correction Coefficient of DispRate - O O
755-220 Disp Environment Correction Coefficient [C] 128 1 255 Environment Correction Coefficient of DispRate - O O
755-221 Disp Environment Correction Coefficient [K] 128 1 255 Environment Correction Coefficient of DispRate - O O
755-222 ICDC Integrated Value for EMP Decision[Y] 0 0 4294967295 ICDC Count Integrated Value of NearEmpty and after - O O
755-223 ICDC Integrated Value for EMP Determin- 0 0 4294967295 ICDC Count Integrated Value of NearEmpty and after - O O
ing[M]
755-224 ICDC Integrated Value for EMP Decision[C] 0 0 4294967295 ICDC Count Integrated Value of NearEmpty and after - O O
755-225 ICDC Integrated Value for EMP Decision[K] 0 0 4294967295 ICDC Count Integrated Value of NearEmpty and after - O O
755-226 PV for EMP Determination [Y] 0 0 65535 PV for Toner Empty Determination - O O
755-227 PV for EMP Determination [M] 0 0 65535 PV for Toner Empty Determination - O O
755-228 PV for EMP Determination [C] 0 0 65535 PV for Toner Empty Determination - O O
755-229 PV for EMP Determination [K] 0 0 65535 PV for Toner Empty Determination - O O
755-230 PreNear Estimate Threshold Value [Y] 1229 0 65535 Toner Remaining Amount Estimate Integrated Value equivalent to Pre- - O O
Near
 Table 1 NVM 755_Process Control 4 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
755-231 PreNear Estimate Threshold Value [M] 1215 0 65535 Toner Remaining Amount Estimate Integrated Value equivalent to Pre- - O O
Near
755-232 PreNear Estimate Threshold Value [C] 1229 0 65535 Toner Remaining Amount Estimate Integrated Value equivalent to Pre- - O O
Near
755-233 PreNear Estimate Threshold Value [K] 1206 0 65535 Toner Remaining Amount Estimate Integrated Value equivalent to Pre- - O O
Near
755-234 ICDC Integrated Value for PreNear [Y] 0 0 4294967295 ICDC Count Integrated Value of PreNear Level and after - O O
755-235 ICDC Integrated Value for PreNear[M] 0 0 4294967295 ICDC Count Integrated Value of PreNear Level and after - O O
755-236 ICDC Integrated Value for PreNear[C] 0 0 4294967295 ICDC Count Integrated Value of PreNear Level and after - O O
755-237 ICDC Integrated Value for PreNear[K] 0 0 4294967295 ICDC Count Integrated Value of PreNear Level and after - O O
755-238 Remaining Toner Amount %[Y] 100 0 100 Remaining Toner Percentage - O O
755-239 Remaining Toner Amount %[M] 100 0 100 Remaining Toner Percentage - O O
755-240 Remaining Toner Amount %[C] 100 0 100 Remaining Toner Percentage - O O
755-241 Remaining Toner Amount%[K] 100 0 100 Remaining Toner Percentage - O O
755-242 No. of Recovery [Y] 0 0 255 No. of Toner Recovery Operation performed - O O
755-243 No. of Recovery [M] 0 0 255 No. of Toner Recovery Operation performed - O O
755-244 No. of Recovery [C] 0 0 255 No. of Toner Recovery Operation performed - O O
755-245 No. of Recovery [K] 0 0 255 No. of Toner Recovery Operation performed - O O
755-246 No. of Recovery Filling [Y] 0 0 255 No. of Filling Operation performed during Toner Recovery - O O
755-247 No. of Recovery Filling [M] 0 0 255 No. of Filling Operation performed during Toner Recovery - O O
755-248 No. of Recovery Filling [C] 0 0 255 No. of Filling Operation performed during Toner Recovery - O O
755-249 No. Recovery Filling [K] 0 0 255 No. of Filling Operation performed during Toner Recovery - O O
755-250 Standard Toner Ratio [Y] 1000 0 2000 Standard Toner Amount to Initial Toner Amount Ratio 0.1[%] O O
755-251 Standard Toner Ratio [M] 1000 0 2000 Standard Toner Amount to Initial Toner Amount Ratio 0.1[%] O O
755-252 Standard Toner Ratio [C] 1000 0 2000 Standard Toner Amount to Initial Toner Amount Ratio 0.1[%] O O
755-253 Standard Toner Ratio [K] 1000 0 2000 Standard Toner Amount to Initial Toner Amount Ratio 0.1[%] O O
755-254 Disp Time Integrated Value for Remaining 0 0 4294967295 Disp Integrated Value for Toner Remaining Amount 1[ms] O O
Amount Estimate[Y]
755-255 Disp Time Integrated Value for Remaining 0 0 4294967295 Disp Integrated Value for Toner Remaining Amount 1[ms] O O
Amount Estimate[M]
755-256 Disp Time Integrated Value for Remaining 0 0 4294967295 Disp Integrated Value for Toner Remaining Amount 1[ms] O O
Amount Estimate[C]
755-257 Disp Time Integrated Value for Remaining 0 0 4294967295 Disp Integrated Value for Toner Remaining Amount 1[ms] O O
Amount Estimate[K]
755-258 ICDC Integrated Value for Remaining Amount 0 0 4294967295 ICDC Count Integrated Value of Toner Cartridge - O O
Estimate[Y]
755-259 ICDC Integrated Value for Remaining Amount 0 0 4294967295 ICDC Count Integrated Value of Toner Cartridge - O O
Estimate [M]
755-260 ICDC Integrated Value for Remaining Estimate 0 0 4294967295 ICDC Count Integrated Value of Toner Cartridge - O O
[C]

Version 1.1 05/2014 6.3.15 NVM 755_Process Control 4 List

6-157
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-158 6.3.15 NVM 755_Process Control 4 List
Table 1 NVM 755_Process Control 4 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
755-261 ICDC Integrated Value for Remaining Estimate 0 0 4294967295 ICDC Count Integrated Value of Toner Cartridge - O O
[K]
755-262 Integrated Value for Remaining Estimate[Y] 0 0 4294967295 Integrated Value for remaining Toner Estimate - O O
755-263 Integrated Value for Remaining Estimate [M] 0 0 4294967295 Integrated Value for remaining Toner Estimate - O O
755-264 Integrated Value for Remaining Estimate [C] 0 0 4294967295 Integrated Value for remaining Toner Estimate - O O
755-265 Integrated Value for Remaining Estimate [K] 0 0 4294967295 Integrated Value for remaining Toner Estimate - O O
755-266 Filling Toner Amount [Y] 74 0 65535 Filling Toner Amount of Toner Cartridge 1[g] O O
755-267 Filling Toner Amount [M] 74 0 65535 Filling Toner Amount of Toner Cartridge 1[g] O O
755-268 Filling Toner Amount [C] 74 0 65535 Filling Toner Amount of Toner Cartridge 1[g] O O
755-269 Filling Toner Amount [K] 100 0 65535 Filling Toner Amount of Toner Cartridge 1[g] O O
755-270 Initial PV[YMC] 0 0 65535 PV from Initial Installation - O X
755-271 Initial PV[K] 0 0 65535 PV from Initial Installation - O X
755-272 Accumulated Toner Amount [Y] 0 0 4294967295 Accumulated Toner Usage Amount (1=0.1g) - O O
755-273 Accumulated Toner Amount [M] 0 0 4294967295 Accumulated Toner Usage Amount (1=0.1g) - O O
755-274 Accumulated Toner Amount [C] 0 0 4294967295 Accumulated Toner Usage Amount (1=0.1g) - O O
755-275 Accumulated Toner Amount [K] 0 0 4294967295 Accumulated Toner Usage Amount (1=0.1g) - O O
755-276 Integrated Value for old Remaining Amount 0 0 4294967295 Integrated Value for remaining Toner Estimate - O O
Estimate[Y]
755-277 Integrated Value for old Remaining Amount 0 0 4294967295 Integrated Value for remaining Toner Estimate - O O
Estimate[M]
755-278 Integrated Value for old Remaining Amount 0 0 4294967295 Integrated Value for remaining Toner Estimate - O O
Estimate[C]
755-279 Integrated Value for old Remaining Amount 0 0 4294967295 Integrated Value for remaining Toner Estimate - O O
Estimate[K]
755-280 Remaining Amount 0% Estimate Threshold 1420 0 65535 Toner Remaining Amount Estimate Integrated Value equivalent to 0% - O O
Value[Y] Remaining Amount
755-281 Remaining Amount 0% Estimate Threshold 1420 0 65535 Toner Remaining Amount Estimate Integrated Value equivalent to 0% - O O
Value[M] Remaining Amount
755-282 Remaining Amount 0% Estimate Threshold 1420 0 65535 Toner Remaining Amount Estimate Integrated Value equivalent to 0% - O O
Value[C] Remaining Amount
755-283 Remaining Amount 0% Estimate Threshold 1420 0 65535 Toner Remaining Amount Estimate Integrated Value equivalent to 0% - O O
Value[K] Remaining Amount
755-284 NearEMP Estimate Threshold Value[Y] 1321 0 65535 Toner Remaining Amount Estimate Integrated Value equivalent to - O O
NearEmpty
755-285 NearEMP Estimate Threshold Value[M] 1321 0 65535 Toner Remaining Amount Estimate Integrated Value equivalent to - O O
NearEmpty
755-286 NearEMP Estimate Threshold Value[C] 1321 0 65535 Toner Remaining Amount Estimate Integrated Value equivalent to - O O
NearEmpty
755-287 NearEMP Estimate Threshold Value[K] 1321 0 65535 Toner Remaining Amount Estimate Integrated Value equivalent to - O O
NearEmpty
 Table 1 NVM 755_Process Control 4 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
755-288 EMP Estimate Threshold Value[Y] 1420 0 65535 Toner Remaining Amount Estimate Integrated Value equivalent to - O O
Empty
755-289 EMP Estimate Threshold Value[M] 1420 0 65535 Toner Remaining Amount Estimate Integrated Value equivalent to - O O
Empty
755-290 EMP Estimate Threshold Value[C] 1420 0 65535 Toner Remaining Amount Estimate Integrated Value equivalent to - O O
Empty
755-291 EMP Estimate Threshold Value[K] 1420 0 65535 Toner Remaining Amount Estimate Integrated Value equivalent to - O O
Empty
755-292 Flag Remaining Amount Estimate Empty 0 0 3 0: Normal, 1: PreNear, 2: NearEmpty, 3: Empty - O O
Detection Status[Y]
755-293 Flag Remaining Amount Estimate Empty 0 0 3 0: Normal, 1: PreNear, 2: NearEmpty, 3: Empty - O O
Detection Status[M]
755-294 Flag Remaining Amount Estimate Empty 0 0 3 0: Normal, 1: PreNear, 2: NearEmpty, 3: Empty - O O
Detection Status[C]
755-295 Flag Remaining Amount Estimate Empty 0 0 3 0: Normal, 1: PreNear, 2: NearEmpty, 3: Empty - O O
Detection Status[K]
755-296 No. of TC Adjustment [Y] 0 0 255 No. of TC Adjustment - O O
755-297 No. of TC Adjustment [M] 0 0 255 No. of TC Adjustment - O O
755-298 No. of TC Adjustment [C] 0 0 255 No. of TC Adjustment - O O
755-299 No. of TC Adjustment [K] 0 0 255 No. of TC Adjustment - O O
755-300 No. of Density Determination_Normal [Y] 0 0 1023 No. of TC Adjustment when Normal - O O
755-301 No. of Density Determination_Normal [M] 0 0 1023 No. of TC Adjustment when Normal - O O
755-302 No. of Density Determination_Normal [C] 0 0 1023 No. of TC Adjustment when Normal - O O
755-303 No. of Density Determination_Normal [K] 0 0 1023 No. of TC Adjustment when Normal - O O
755-304 No. of Density Determination_PreNear [Y] 0 0 1023 No. of TC Adjustment when PreNear - O O
755-305 No. of Density Determination_PreNear [M] 0 0 1023 No. of TC Adjustment when PreNear - O O
755-306 No. of Density Determination_PreNear [C] 0 0 1023 No. of TC Adjustment when PreNear - O O
755-307 No. of Density Determination_PreNear [K] 0 0 1023 No. of TC Adjustment when PreNear - O O
755-308 Last RADC_TC[Y] 0 0 1023 Last RADC_TC - O O
755-309 Last RADC_TC[M] 0 0 1023 Last RADC_TC - O O
755-310 Last RADC_TC[C] 0 0 1023 Last RADC_TC - O O
755-311 Last RADC_TC[K] 0 0 1023 Last RADC_TC - O O
755-312 PreNear Correction Amount [Y] 0 -32768 32767 PreNear Correction Amount - O O
755-313 PreNear Correction Amount [M] 0 -32768 32767 PreNear Correction Amount - O O
755-314 PreNear Correction Amount [C] 0 -32768 32767 PreNear Correction Amount - O O
755-315 PreNear Correction Amount [K] 0 -32768 32767 PreNear Correction Amount - O O
755-316 No. of Recovery Adjustment [Y] 0 0 255 No. of Toner Recovery Adjustment - O O
755-317 No. of Recovery Adjustment [M] 0 0 255 No. of Toner Recovery Adjustment - O O
755-318 No. of Recovery Adjustment [C] 0 0 255 No. of Toner Recovery Adjustment - O O

Version 1.1 05/2014 6.3.15 NVM 755_Process Control 4 List

6-159
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-160 6.3.15 NVM 755_Process Control 4 List
Table 1 NVM 755_Process Control 4 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
755-319 No. of Recovery Adjustment [K] 0 0 255 No. of Toner Recovery Adjustment - O O
755-320 No. of Unsuccessful Recovery [Y] 0 0 1023 Integrated Value of No. of Unsuccessful Recovery - O O
755-321 No. of Unsuccessful Recovery [M] 0 0 1023 Integrated Value of No. of Unsuccessful Recovery - O O
755-322 No. of Unsuccessful Recovery [C] 0 0 1023 Integrated Value of No. of Unsuccessful Recovery - O O
755-323 No. of Unsuccessful Recovery [K] 0 0 1023 Integrated Value of No. of Unsuccessful Recovery - O O
755-324 Vdeve_PCON [Y] [Current] 270 0 1023 PCON potential Vdeve value - O O
755-325 Vdeve_PCON[Y][Last] 270 0 1023 PCON potential Vdeve value - O O
755-326 Vdeve_PCON [M] [Current] 270 0 1023 PCON potential Vdeve value - O O
755-327 Vdeve_PCON[M][Last] 270 0 1023 PCON potential Vdeve value - O O
755-328 Vdeve_PCON [C] [Current] 270 0 1023 PCON potential Vdeve value - O O
755-329 Vdeve_PCON[C][Last] 270 0 1023 PCON potential Vdeve value - O O
755-330 Vdeve_PCON [K] [Current] 270 0 1023 PCON potential Vdeve value - O O
755-331 Vdeve_PCON[K][Last] 270 0 1023 PCON potential Vdeve value - O O
755-332 Correction Vdeve Lower Limit [Y] 250 1 1023 Correction Vdeve lower limit value - O O
755-333 Correction Vdeve Lower Limit [M] 250 1 1023 Correction Vdeve lower limit value - O O
755-334 Correction Vdeve Lower Limit [C] 250 1 1023 Correction Vdeve lower limit value - O O
755-335 Correction Vdeve Lower Limit [K] 250 1 1023 Correction Vdeve lower limit value - O O
755-336 Correction Vdeve Upper Limit [Y] 390 1 1023 Correction Vdeve Upper Limit Value - O O
755-337 Correction Vdeve Upper Limit [M] 390 1 1023 Correction Vdeve Upper Limit Value - O O
755-338 Correction Vdeve Upper Limit [C] 390 1 1023 Correction Vdeve Upper Limit Value - O O
755-339 Vdeve Upper Limit [K] 390 1 1023 Correction Vdeve Upper Limit Value - O O
755-340 CF_PCON[Y][Current] 110 1 1023 PCON potential CF value - O O
755-341 CF_PCON[Y][Last] 110 1 1023 PCON potential CF value - O O
755-342 CF_PCON[M][Current] 110 1 1023 PCON potential CF value - O O
755-343 CF_PCON[M][Last] 110 1 1023 PCON potential CF value - O O
755-344 CF_PCON[C][Current] 110 1 1023 PCON potential CF value - O O
755-345 CF_PCON[C][Last] 110 1 1023 PCON potential CF value - O O
755-346 CF_PCON[K][Current] 110 1 1023 PCON potential CF value - O O
755-347 CF_PCON[K][Last] 110 1 1023 PCON potential CF value - O O
755-348 Correction CF Lower Limit [Y] 110 1 1023 Correction CF lower limit value - O O
755-349 Correction CF Lower Limit [M] 110 1 1023 Correction CF lower limit value - O O
755-350 Correction CF Lower Limit [C] 110 1 1023 Correction CF lower limit value - O O
755-351 Correction CF Lower Limit [K] 110 1 1023 Correction CF lower limit value - O O
755-352 Correction CF Upper Limit [Y] 110 1 1023 Correction CF upper limit value - O O
755-353 Correction CF Upper Limit [M] 110 1 1023 Correction CF upper limit value - O O
755-354 Correction CF Upper Limit [C] 110 1 1023 Correction CF upper limit value - O O
755-355 Correction CF Upper Limit [K] 110 1 1023 Correction CF upper limit value - O O
755-356 VH_PCON[Y] 400 0 1023 PCON potential VH value - O O
 Table 1 NVM 755_Process Control 4 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
755-357 VH_PCON[M] 400 0 1023 PCON potential VH value - O O
755-358 VH_PCON[C] 400 0 1023 PCON potential VH value - O O
755-359 VH_PCON[K] 400 0 1023 PCON potential VH value - O O
755-360 VB_PCON[YMC] 290 0 1023 PCON potential VB value - O O
755-361 VB_PCON[K] 290 0 1023 PCON potential VB value - O O
755-362 Vdeve_Standard [Y] 270 1 1023 Standard Potential Vdeve Value - O O
755-363 Vdeve_Standard [M] 270 1 1023 Standard Potential Vdeve Value - O O
755-364 Vdeve_Standard [C] 270 1 1023 Standard Potential Vdeve Value - O O
755-365 Vdeve_Standard [K] 270 1 1023 Standard Potential Vdeve Value - O O
755-366 CF_Standard [Y] 110 1 1023 Standard Potential CF Value - O O
755-367 CF_Standard [M] 110 1 1023 Standard Potential CF Value - O O
755-368 CF_Standard [C] 110 1 1023 Standard Potential CF Value - O O
755-369 CF_Standard [K] 110 1 1023 Standard Potential CF Value - O O
755-370 RP[Y] 10 0 1023 RP Value - O O
755-371 RP[M] 10 0 1023 RP Value - O O
755-372 RP[C] 10 0 1023 RP Value - O O
755-373 RP[K] 10 0 1023 RP Value - O O
755-374 Contrast Ratio_MiniSetup[Y] 314 1 65535 Contrast Ratio of MiniSetup used for CF_PCON Calculation SW=1:00 - O O
755-375 Contrast Ratio_MiniSetup[M] 314 1 65535 Contrast Ratio of MiniSetup used for CF_PCON Calculation SW=1:00 - O O
755-376 Contrast Ratio_MiniSetup[C] 314 1 65535 Contrast Ratio of MiniSetup used for CF_PCON Calculation SW=1:00 - O O
755-377 Contrast Ratio_MiniSetup[K] 314 1 65535 Contrast Ratio of MiniSetup used for CF_PCON Calculation SW=1:00 - O O
755-378 No. of Vdeve_PCON Partition 1 1 255 PCON Potential Vdeve Value_No. of Partition - O O
755-379 Delta VB_Vdeve Correction Amount 0 -511 511 Delta VB_Vdeve Correction Amount - O O
[YMC][Current]
755-380 Delta VB_Vdeve Correction Amount 0 -511 511 Delta VB_Vdeve Correction Amount - O O
[YMC][Last]
755-381 Delta VB_Vdeve Correction Amount [K][Cur- 0 -511 511 Delta VB_Vdeve Correction Amount - O O
rent]
755-382 Delta VB_Vdeve Correction Amount [K][Last] 0 -511 511 Delta VB_Vdeve Correction Amount - O O
755-383 BCR_DC Correction Offset_Estimate [Y] 572 -1024 1023 BCR for Estimate Potential_DC Correction Offset Value - O O
755-384 BCR_DC Correction Offset_Estimate [M] 572 -1024 1023 BCR for Estimate Potential_DC Correction Offset Value - O O
755-385 BCR_DC Correction Offset_Estimate [C] 572 -1024 1023 BCR for Estimate Potential_DC Correction Offset Value - O O
755-386 BCR_DC Correction Offset_Estimate [K] 572 -1024 1023 BCR for Estimate Potential_DC Correction Offset Value - O O
755-387 BCR_DC Correction Coefficient_Estimate [Y] 1054 0 65535 BCR for Estimate Potential_DC Correction Coefficient - O O
755-388 BCR_DC Correction Coefficient_Estimate [M] 1054 0 65535 BCR for Estimate Potential_DC Correction Coefficient - O O
755-389 BCR_DC Correction Coefficient_Estimate [C] 1054 0 65535 BCR for Estimate Potential_DC Correction Coefficient - O O
755-390 BCR_DC Correction Coefficient_Estimate [K] 1054 0 65535 BCR for Estimate Potential_DC Correction Coefficient - O O
755-391 Standard LPH[Y] 677 0 2046 Standard LPH - O O

Version 1.1 05/2014 6.3.15 NVM 755_Process Control 4 List

6-161
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-162 6.3.15 NVM 755_Process Control 4 List
Table 1 NVM 755_Process Control 4 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
755-392 Standard LPH[M] 677 0 2046 Standard LPH - O O
755-393 Standard LPH[C] 677 0 2046 Standard LPH - O O
755-394 Standard LPH[K] 677 0 2046 Standard LPH - O O
755-395 LPH_PS Correction Coefficient [Y][PS0] 1024 0 65535 LPH_PS Correction Coefficient - O O
755-396 LPH_PS Correction Coefficient [Y][PS1] 1024 0 65535 LPH_PS Correction Coefficient - O O
755-397 LPH_PS Correction Coefficient [M][PS0] 1024 0 65535 LPH_PS Correction Coefficient - O O
755-398 LPH_PS Correction Coefficient [M][PS1] 1024 0 65535 LPH_PS Correction Coefficient - O O
755-399 LPH_PS Correction Coefficient [C][PS0] 1024 0 65535 LPH_PS Correction Coefficient - O O
755-400 LPH_PS Correction Coefficient [C][PS1] 1024 0 65535 LPH_PS Correction Coefficient - O O
755-401 LPH_PS Correction Coefficient [K][PS0] 1024 0 65535 LPH_PS Correction Coefficient - O O
755-402 LPH_PS Correction Coefficient [K][PS0] 1024 0 65535 LPH_PS Correction Coefficient - O O
755-403 Delta LPH Speed Correction Amount [Y][PS0] 0 -1024 1023 Correction Amount of LPH_PS Correction Coefficient - O O
755-404 Delta LPH Speed Correction Amount [Y][PS1] 0 -1024 1023 Correction Amount of LPH_PS Correction Coefficient - O O
755-405 Delta LPH Speed Correction Amount [M][PS0] 0 -1024 1023 Correction Amount of LPH_PS Correction Coefficient - O O
755-406 Delta LPH Speed Correction Amount [M][PS1] 0 -1024 1023 Correction Amount of LPH_PS Correction Coefficient - O O
755-407 Delta LPH Speed Correction Amount [C][PS0] 0 -1024 1023 Correction Amount of LPH_PS Correction Coefficient - O O
755-408 Delta LPH Speed Correction Amount [C][PS1] 0 -1024 1023 Correction Amount of LPH_PS Correction Coefficient - O O
755-409 Delta LPH Speed Correction Amount [K][PS0] 0 -1024 1023 Correction Amount of LPH_PS Correction Coefficient - O O
755-410 Delta LPH Speed Correction Amount [K][PS1] 0 -1024 1023 Correction Amount of LPH_PS Correction Coefficient - O O
755-411 P_LUT[Y][LUT0] 25 0 511 Point LUT Value of 6 points - O O
755-412 P_LUT[Y][LUT1] 36 0 511 Point LUT Value of 6 points - O O
755-413 P_LUT[Y][LUT2] 76 0 511 Point LUT Value of 6 points - O O
755-414 P_LUT[Y][LUT3] 112 0 511 Point LUT Value of 6 points - O O
755-415 P_LUT[Y][LUT4] 148 0 511 Point LUT Value of 6 points - O O
755-416 P_LUT[Y][LUT5] 255 0 511 Point LUT Value of 6 points - O O
755-417 P_LUT[M][LUT0] 25 0 511 Point LUT Value of 6 points - O O
755-418 P_LUT[M][LUT1] 36 0 511 Point LUT Value of 6 points - O O
755-419 P_LUT[M][LUT2] 76 0 511 Point LUT Value of 6 points - O O
755-420 P_LUT[M][LUT3] 112 0 511 Point LUT Value of 6 points - O O
755-421 P_LUT[M][LUT4] 148 0 511 Point LUT Value of 6 points - O O
755-422 P_LUT[M][LUT5] 255 0 511 Point LUT Value of 6 points - O O
755-423 P_LUT[C][LUT0] 25 0 511 Point LUT Value of 6 points - O O
755-424 P_LUT[C][LUT1] 36 0 511 Point LUT Value of 6 points - O O
755-425 P_LUT[C][LUT2] 76 0 511 Point LUT Value of 6 points - O O
755-426 P_LUT[C][LUT3] 112 0 511 Point LUT Value of 6 points - O O
755-427 P_LUT[C][LUT4] 148 0 511 Point LUT Value of 6 points - O O
755-428 P_LUT[C][LUT5] 255 0 511 Point LUT Value of 6 points - O O
755-429 P_LUT[K][LUT0] 25 0 511 Point LUT Value of 6 points - O O
 Table 1 NVM 755_Process Control 4 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
755-430 P_LUT[K][LUT1] 36 0 511 Point LUT Value of 6 points - O O
755-431 P_LUT[K][LUT2] 76 0 511 Point LUT Value of 6 points - O O
755-432 P_LUT[K][LUT3] 112 0 511 Point LUT Value of 6 points - O O
755-433 P_LUT[K][LUT4] 148 0 511 Point LUT Value of 6 points - O O
755-434 P_LUT[K][LUT5] 255 0 511 Point LUT Value of 6 points - O O
755-435 P_LUT_Manual Adjustment ON[Y][LUT0] 25 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-436 P_LUT_Manual Adjustment ON[Y][LUT1] 36 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-437 P_LUT_Manual Adjustment ON[Y][LUT2] 76 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-438 P_LUT_Manual Adjustment ON[Y][LUT3] 112 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-439 P_LUT_Manual Adjustment ON[Y][LUT4] 148 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-440 P_LUT_Manual Adjustment ON[Y][LUT5] 255 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-441 P_LUT_Manual Adjustment ON[M][LUT0] 25 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-442 P_LUT_Manual Adjustment ON[M][LUT1] 36 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-443 P_LUT_Manual Adjustment ON[M][LUT2] 76 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-444 P_LUT_Manual Adjustment ON[M][LUT3] 112 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-445 P_LUT_Manual Adjustment ON[M][LUT4] 148 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-446 P_LUT_Manual Adjustment ON[M][LUT5] 255 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-447 P_LUT_Manual Adjustment ON[C][LUT0] 25 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-448 P_LUT_Manual Adjustment ON[C][LUT1] 36 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-449 P_LUT_Manual Adjustment ON[C][LUT2] 76 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-450 P_LUT_Manual Adjustment ON[C][LUT3] 112 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-451 P_LUT_Manual Adjustment ON[C][LUT4] 148 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-452 P_LUT_Manual Adjustment ON[C][LUT5] 255 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-453 P_LUT_Manual Adjustment ON[K][LUT0] 25 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-454 P_LUT_Manual Adjustment ON[K][LUT1] 36 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-455 P_LUT_Manual Adjustment ON[K][LUT2] 76 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-456 P_LUT_Manual Adjustment ON[K][LUT3] 112 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-457 P_LUT_Manual Adjustment ON[K][LUT4] 148 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-458 P_LUT_Manual Adjustment ON[K][LUT5] 255 -512 511 Point LUT Value after Manual Adjustment of Manual Adjustment ON - O O
755-459 Recovery Disp Time Integrated Value [Y] 0 0 1023 Disp Time Integrated Value during Toner Recovery 1[sec] O O
755-460 Recovery Disp Time Integrated Value [M] 0 0 1023 Disp Time Integrated Value during Toner Recovery 1[sec] O O
755-461 Recovery Disp Time Integrated Value [C] 0 0 1023 Disp Time Integrated Value during Toner Recovery 1[sec] O O
755-462 Recovery Disp Time Integrated Value [K] 0 0 1023 Disp Time Integrated Value during Toner Recovery 1[sec] O O
755-463 ADC Sensor Contamination State 0 0 1 ADC Sensor Contamination State - O O
755-464 ADC_LED Light Amount Value 800 0 2800 ADC Detection LED Light Amount Value 0.01[mA] O O
755-465 Flag_Image Profile LIFE[Y] 0 0 1 Flag_Image Profile LIFE - O O
755-466 Flag_Image Profile LIFE[M] 0 0 1 Flag_Image Profile LIFE - O O
755-467 Flag_Image Profile LIFE[C] 0 0 1 Flag_Image Profile LIFE - O O

Version 1.1 05/2014 6.3.15 NVM 755_Process Control 4 List

6-163
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-164 6.3.15 NVM 755_Process Control 4 List
Table 1 NVM 755_Process Control 4 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
755-468 Flag_Image Profile LIFE[K] 0 0 1 Flag_Image Profile LIFE - O O
755-473 VB_PCON_Mini[YMC] 290 0 1023 PCON Potential VB Value after Mini - O O
755-474 VB_PCON_Mini[K] 290 0 1023 PCON Potential VB Value after Mini - O O
755-475 ToneUp Timer Toner Refill Time 0 0 65535 ToneUp Timer Toner Refill Time 1[ms] O O
755-476 Timer Toner Refill Time for No ToneUpDown 0 0 65535 Timer Toner Refill Time in ToneUpDown Completion Status 1[ms] O O
755-477 No. of Recovery_MC[Y] 0 0 1023 MS Integrated Value of No. of Recovery - O X
755-478 No. of Recovery_MC[M] 0 0 1023 MS Integrated Value of No. of Recovery - O X
755-479 No. of Recovery_MC[C] 0 0 1023 MS Integrated Value of No. of Recovery - O X
755-480 No. of Recovery_MC[K] 0 0 1023 MS Integrated Value of No. of Recovery - O X
755-481 ADC Belt 1 Lap Vcln Fail Flag[BW] 0 0 1 FC/BW individual ADC Belt 1 Lap Vcln Fail Flag - O O
755-482 ADC Belt 1 Lap Vcln Fail Flag[FC] 0 0 1 FC/BW individual ADC Belt 1 Lap Vcln Fail Flag - O O
755-483 ADC LED Light Change Flag[BW] 0 0 1 FC/BW individual ADC Belt 1 Lap Vcln Fail Flag - O O
755-484 ADC LED Light Change Flag[FC] 0 0 1 FC/BW individual ADC Belt 1 Lap Vcln Fail Flag - O O
755-485 ADC_Vcln_All Mean_Classification[BW] 0 0 1023 Output Mean Value of ADC_Vcln Belt 1 Lap - O O
755-486 ADC_Vcln_All Mean_Classification[FC] 0 0 1023 Output Mean Value of ADC_Vcln Belt 1 Lap - O O
755-487 No. of Refill[Y] 0 0 255 Sync with Toner_Refill_Count of Count (for machine storage) CRUM - O O
No. of Refill
755-488 No. of Refill[M] 0 0 255 Sync with Toner_Refill_Count of Count (for machine storage) CRUM - O O
No. of Refill
755-489 No. of Refill[C] 0 0 255 Sync with Toner_Refill_Count of Count (for machine storage) CRUM - O O
No. of Refill
755-490 No. of Refill[K] 0 0 255 Sync with Toner_Refill_Count of Count (for machine storage) CRUM - O O
No. of Refill
755-491 No. of Disp[Y] 0 0 65535 Count Value of No. of Disp Execution - O O
755-492 No. of Disp[M] 0 0 65535 Count Value of No. of Disp Execution - O O
755-493 No. of Disp[C] 0 0 65535 Count Value of No. of Disp Execution - O O
755-494 No. of Disp[K] 0 0 65535 Count Value of No. of Disp Execution - O O
755-495 Setup Execution Time [BW] 0 0 4294967295 Setup Execution Time minute O O
755-496 Setup Execution Time [FC] 0 0 4294967295 Setup Execution Time minute O O
755-497 ADC_Mid/End Counter [YMC] 0 0 255 Mid/EndSetup Execution Counter after MiniSetup - O O
755-498 ADC_Mid/End Counter [K] 0 0 255 Mid/EndSetup Execution Counter after MiniSetup - O O
6.3.16 NVM 759_Registration Control 1 List
Table 1 NVM 759_Registration Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
759-006 SR_EXP_LIMIT_SW 0 0 2 Side Regi Correction Exposable Width Limit Switch - O O
759-007 MOBCAP_ERR_FLG 0 0 65535 MOB Captcha Error Flag - O O
759-022 Detected Value of Belt Clean Surface during Vhigh 0 0 1023 Detected Value of Belt Clean Surface during Vhigh Setting [p=0] - X O
Setting [p=0]
759-023 Detected Value of Belt Clean Surface during Vhigh 0 0 1023 Detected Value of Belt Clean Surface during Vhigh Setting [p=2] - X O
Setting [p=2]
759-024 Detected Value of Belt Clean Surface during Vlow Set- 0 0 1023 Detected Value of Belt Clean Surface during Vlow Setting [p=0] - X O
ting [p=0]
759-025 Detected Value of Belt Clean Surface during Vlow Set- 0 0 1023 Detected Value of Belt Clean Surface during Vlow Setting [p=2] - X O
ting [p=2]
759-026 MOB LED Light Setting [p=0] 1000 0 2800 Calculates and sets up OnDuty_PWM [%] corresponds to MOB LED - O O
Light Amount Setting [p=0]
759-027 MOB LED Light Setting [p=2] 1000 0 2800 Calculates and sets up OnDuty_PWM [%] corresponds to MOB LED - O O
Light Amount Setting [p=2]
759-028 Belt Clean Surface Output Voltage [p=0] 0 0 1023 Belt Clean Surface Output Voltage [p=0] OUT Side MOB Sensor Belt - X O
Clean Surface Output Voltage
759-029 Belt Clean Surface Output Voltage [p=2] 0 0 1023 Shown from Belt Clean Surface Output Voltage [p=2] IN Side MOB - X O
Sensor Belt Clean Surface Output Voltage Elec
759-031 E Patch Detection Output Voltage [p=0] 0 0 1023 E Patch Detection Output Voltage [p=0] OUT Side MOB Sensor E - X O
Patch Detection Output Voltage
759-032 E Patch Detection Output Voltage [p=2] 0 0 1023 E Patch detection Output Voltage [p=2] IN Side MOB Sensor E Patch - X O
Detection Output Voltage
759-035 MOB GainResult 0 0 1 Set to 0 when starting MOB GainResultMOB GainResultFlag MOB- - O O
Gain Correction Cycle. 0: Either IN/OUT or both of Final MOB Gain
Operation was unsuccessful (Fail occurred). 1: Both IN/OUT of final
MOB Gain Operation was successful (No Fail occurred).
759-036 Sensor Stability Fail Flag #OUT 0 0 1 Sensor Stability Fail Flag #OUT - O O
759-037 Sensor Stability Fail Flag #IN 0 0 1 Sensor Stability Fail Flag #IN - O O
759-038 Sensor LED Fail Flag #OUT 0 0 1 Sensor LED Fail Flag #OUT - O O
759-039 Sensor LED Fail Flag #IN 0 0 1 Sensor LED Fail Flag #IN - O O
759-040 Sensor TH Fail Flag #OUT 0 0 1 Sensor TH Fail Flag #OUT - O O
759-041 Sensor TH Fail Flag #IN 0 0 1 Sensor TH Fail Flag #IN - O O
759-081 Thresh Hold Level Voltage [p=0] 150 0 330 Thresh Hold Level Voltage [p=0] Outside MOB Sensor Thresh Hold - O O
level Voltage (1.8V)
759-082 Thresh Hold Level Voltage [p=2] 150 0 330 Thresh Hold Level Voltage [p=2] Inside MOB Sensor Thresh Hold - O O
Level Voltage (1.8V)
759-119 RC_Data_OverRange_Fail Flag 0 0 255 bit7: SSside1, bit6: SSside2, bit5: FSside1, bit4: FSside2, bit3: O O
PSKside1, bit2: PSKside2, bit1: -, bit0: -

Version 1.1 05/2014 6.3.16 NVM 759_Registration Control 1 List

6-165
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-166 6.3.16 NVM 759_Registration Control 1 List
Table 1 NVM 759_Registration Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
759-122 Error Detection Flag 0 0 3 0: Normal - O X
1: NCS-Center High Temp Error Detection
2: STS-Rear High Temp Error Detection
3: NCS, STS Temp Raise Error
759-123 Differential Amplification Error Detection Flag 0 0 1 0: Normal - O X
1: Differential Amplification Error Detection
759-129 0:00~5:59 Deve Cycle count Y 0 0 4294967295 Deve Cycle count driven in 0:00~5:59(Greenwich Time). 0.1[Cycle] O O
Uses for Drum Load Mode determination. * Soft Request
759-130 0:00~5:59 Deve Cycle count M 0 0 4294967295 Deve Cycle count driven in 0:00~5:59(Greenwich Time). 0.1[Cycle] O O
Uses for Drum Load Mode determination. * Soft Request
759-131 0:00~5:59 Deve Cycle count C 0 0 4294967295 Deve Cycle count driven in 0:00~5:59(Greenwich Time). 0.1[Cycle] O O
Uses for Drum Load Mode determination. * Soft Request
759-132 0:00~5:59 Deve Cycle count K 0 0 4294967295 Deve Cycle count driven in 0:00~5:59(Greenwich Time). 0.1[Cycle] O O
Uses for Drum Load Mode determination. * Soft Request
759-133 6:00~11:59 Deve Cycle count Y 0 0 4294967295 Deve Cycle count driven in 6:00~11:59(Greenwich Time). 0.1[Cycle] O O
Uses for Drum Load Mode determination. * Soft Request
759-134 6:00~11:59 Deve Cycle count M 0 0 4294967295 Deve Cycle count driven in 6:00~11:59(Greenwich Time). 0.1[Cycle] O O
Uses for Drum Load Mode determination. * Soft Request
759-135 6:00~11:59 Deve Cycle count C 0 0 4294967295 Deve Cycle count driven in 6:00~11:59(Greenwich Time). 0.1[Cycle] O O
Uses for Drum Load Mode determination. * Soft Request
759-136 6:00~11:59 Deve Cycle count K 0 0 4294967295 Deve Cycle count driven in 6:00~11:59(Greenwich Time). 0.1[Cycle] O O
Uses for Drum Load Mode determination. * Soft Request
759-137 12:00~17:59 Deve Cycle count Y 0 0 4294967295 Deve Cycle count driven in 12:00~17:59(Greenwich Time). 0.1[Cycle] O O
Uses for Drum Load Mode determination. * Soft Request
759-138 12:00~17:59 Deve Cycle count M 0 0 4294967295 Deve Cycle count driven in 12:00~17:59(Greenwich Time). 0.1[Cycle] O O
Uses for Drum Load Mode determination. * Soft Request
759-139 12:00~17:59 Deve Cycle count C 0 0 4294967295 Deve Cycle count driven in 12:00~17:59(Greenwich Time). 0.1[Cycle] O O
Uses for Drum Load Mode determination. * Soft Request
759-140 12:00~17:59 Deve Cycle count K 0 0 4294967295 Deve Cycle count driven in 12:00~17:59(Greenwich Time). 0.1[Cycle] O O
Uses for Drum Load Mode determination. * Soft Request
759-141 18:00~23:59 Deve Cycle count Y 0 0 4294967295 Deve Cycle count driven in 18:00~23:59(Greenwich Time). 0.1[Cycle] O O
Uses for Drum Load Mode determination. * Soft Request
759-142 18:00~23:59 Deve Cycle count M 0 0 4294967295 Deve Cycle count driven in 18:00~23:59(Greenwich Time). 0.1[Cycle] O O
Uses for Drum Load Mode determination. * Soft Request
759-143 18:00~23:59 Deve Cycle count C 0 0 4294967295 Deve Cycle count driven in 18:00~23:59(Greenwich Time). 0.1[Cycle] O O
Uses for Drum Load Mode determination. * Soft Request
759-144 18:00~23:59 Deve Cycle count K 0 0 4294967295 Deve Cycle count driven in 18:00~23:59(Greenwich Time). 0.1[Cycle] O O
Uses for Drum Load Mode determination. * Soft Request
759-145 0:00~5:59 Deve Cycle count Writing Date/Time Y 0 0 4294967295 Deve Cycle count Final Writing Time. * Soft Request minute O O
759-146 6:00~11:59 Deve Cycle count Writing Date/Time Y 0 0 4294967295 Deve Cycle count Final Writing Time. * Soft Request minute O O
759-147 12:00~17:59 Deve Cycle count Writing Date/Time Y 0 0 4294967295 Deve Cycle count Final Writing Time. * Soft Request minute O O
 Table 1 NVM 759_Registration Control 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
759-148 18:00~23:59 Deve Cycle count Writing Date/Time Y 0 0 4294967295 Deve Cycle count Final Writing Time. * Soft Request minute O O
759-149 0:00~5:59 Deve Cycle count Writing Date/Time M 0 0 4294967295 Deve Cycle count Final Writing Time. * Soft Request minute O O
759-150 6:00~11:59 Deve Cycle count Writing Date/Time M 0 0 4294967295 Deve Cycle count Final Writing Time. * Soft Request minute O O
759-151 12:00~17:59 Deve Cycle count Writing Date/Time M 0 0 4294967295 Deve Cycle count Final Writing Time. * Soft Request minute O O
759-152 18:00~23:59 Deve Cycle count Writing Date/Time M 0 0 4294967295 Deve Cycle count Final Writing Time. * Soft Request minute O O
759-153 0:00~5:59 Deve Cycle count Writing Date/Time C 0 0 4294967295 Deve Cycle count Final Writing Time. * Soft Request minute O O
759-154 6:00~11:59 Deve Cycle count Writing Date/Time C 0 0 4294967295 Deve Cycle count Final Writing Time. * Soft Request minute O O
759-155 12:00~17:59 Deve Cycle count Writing Date/Time C 0 0 4294967295 Deve Cycle count Final Writing Time. * Soft Request minute O O
759-156 18:00~23:59 Deve Cycle count Writing Date/Time C 0 0 4294967295 Deve Cycle count Final Writing Time. * Soft Request minute O O
759-157 0:00~5:59 Deve Cycle count Writing Date/Time K 0 0 4294967295 Deve Cycle count Final Writing Time. * Soft Request minute O O
759-158 6:00~11:59 Deve Cycle count Writing Date/Time K 0 0 4294967295 Deve Cycle count Final Writing Time. * Soft Request minute O O
759-159 12:00~17:59 Deve Cycle count Writing Date/Time K 0 0 4294967295 Deve Cycle count Final Writing Time. * Soft Request minute O O
759-160 18:00~23:59 Deve Cycle count Writing Date/Time K 0 0 4294967295 Deve Cycle count Final Writing Time. * Soft Request minute O O
759-165 #Y Low A/C Band Cycle 0 0 65535 Drive Time/Drum 0.1 Rotation Time of Drum Mot ON to OFF 0.1[Cycle] O O
759-166 #M Low A/C Band Cycle 0 0 65535 Drive Time/Drum 0.1 Rotation Time of Drum Mot ON to OFF 0.1[Cycle] O O
759-167 #C Low A/C Band Cycle 0 0 65535 Drive Time/Drum 0.1 Rotation Time of Drum Mot ON to OFF 0.1[Cycle] O O
759-168 #K Low A/C Band Cycle 0 0 65535 Drive Time/Drum 0.1 Rotation Time of Drum Mot ON to OFF 0.1[Cycle] O O
759-169 Job Counter for R/L Decision (BW) 0 0 1000 Job Counter for R/L Mode Decision Job O O
759-170 R/L Determination Job Counter (FC) 0 0 1000 Job Counter for R/L Mode Decision Job O O
759-171 #Y Low Speed Band PV Counter 0 0 65535 Continuous Count of PV during Low Speed Operation PV O O
759-172 #M Low Speed Band PV Counter 0 0 65535 Continuous Count of PV during Low Speed Operation PV O O
759-173 #C Low Speed Band PV Counter 0 0 65535 Continuous Count of PV during Low Speed Operation PV O O
759-174 #K Low Speed Band PV Counter 0 0 65535 Continuous Count of PV during Low Speed Operation PV O O
759-175 #Y Speed Band PV Counter 0 0 65535 Counts the PV during All Speed Operation PV O O
759-176 #M Speed Band PV Counter 0 0 65535 Counts the PV during All Speed Operation PV O O
759-177 #C Speed Band PV Counter 0 0 65535 Counts the PV during All Speed Operation PV O O
759-178 #K Speed Band PV Counter 0 0 65535 Counts the PV during All Speed Operation PV O O

Version 1.1 05/2014 6.3.16 NVM 759_Registration Control 1 List

6-167
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-168 6.3.16 NVM 759_Registration Control 1 List
6.3.17 NVM 760_Registration Control 2 List
Table 1 NVM 760_Registration Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
760-001 LM_ENB_SW 1 0 1 Switch for enabling Fast Scan - O O
760-003 PSK_ENB_SW 1 0 1 Slow Scan Skew Correction Enable SW - O O
760-004 PSKoffset 0 -20 20 Sub Scanning Skew Offset 1pixel@600dpi O O
760-005 PM Special SW 0 0 1 Special Paper Type Support Switch - O O
0: Do not perform, 1: Perform
760-006 PM_OFST_Special 0 -20 20 Special Paper Type Sub-scanning Magnification Offset 0.05[%] O O
760-008 SR_OFST1 0 -20 20 For Front Side Reg Offset IOT Delivery Adjustment 0.1[mm] O O
760-009 SR_OFST2 0 -20 20 For Back Side Reg Offset IOT Delivery Adjustment 0.1[mm] O O
760-015 IReCT_ENB_SW 1 0 1 IReCT Correction Enable SW - O O
760-017 PM_OFST_ORG[ProcessSpeedNum=0] -5 -20 20 PM_OFST_ORG_126 0.05[%] O O
760-018 PM_OFST_ORG[ProcessSpeedNum=1] -5 -20 20 PM_OFST_ORG_063 0.05[%] O O
760-019 Regicon Function Switch 1 0 1 RegiCon Function Switch (Upper switch of each function switch) - O O
0: Do not perform, 1: Perform
760-020 MOB Sensor LED Light Quantity Adjustment 1 0 1 MOB Sensor LED Light Quantity Adjustment Function Switch - O O
Function Switch 0: Do not perform, 1: Perform
760-021 CLRC Function Switch 1 0 1 ClosedLoopRegiCon Function Switch - O O
0: Do not perform, 1: Perform
760-022 MOB-Gain Start Requirement Time 8 0 255 MOB-Gain Start Requirement Threshold Value Time Time O O
760-023 CLRC Start Time1 480 0 65535 CLRC TIme Regcon Operation Start Requirement Threshold Value Time1 minute O O
760-024 CLRC Start Temp1 20 0 255 Temperature difference amount from RC Last Temp1 0.1 [degree] O O
760-025 CLRC Start Temp2 255 0 255 Temperature difference amount from RC Last Temp2 0.1 [degree] O O
760-026 CLRC Start Temp_LPH_Dif 255 0 255 Temperature difference amount for standard color 0.1 [degree] O O
760-037 V high Target [p=0] 260 0 330 V high Target [p=0] - O O
760-038 V low Target [p=0] 30 0 330 V low Target [p=0] - O O
760-039 V Target [p=0] 220 0 330 V Target [p=0] - O O
760-040 Vout Rip Interval 30 1 100 Vout Rip Interval - O O
760-041 No. of Vout Rip 19 1 100 No. of Vout Rip - O O
760-042 No. of Permissible Vout NG 10 0 100 No. of Permissible Vout NG - O O
760-043 MOB Sensor Output Voltage Threshold Value 300 0 330 MOB Sensor Output Voltage Threshold Value (For S1,S2)[p=0] - O O
(For S1,S2)[p=0]
760-047 Th_Offset[p=0] 20 0 255 Value to offset the threshold value [p=0] - O O
760-048 Th_Offset[p=2] 0 0 255 Value to offset the threshold value [p=2] - O O
760-049 V high Target [p=2] 300 0 330 V high Target [p=2] - O O
760-050 V low Target [p=2] 30 0 330 V low Target [p=2] - O O
760-051 V Target [p=2] 250 0 330 V Target [p=2] - O O
760-052 MOB Sensor Output Voltage Threshold Value 300 0 330 MOB Sensor Output Voltage Threshold Value (For S1,S2)[p=2]+/-3V - O O
(For S1,S2)[p=2]

Version 1.1 05/2014 6.3.17 NVM 760_Registration Control 2 List

6-169
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-170 6.3.17 NVM 760_Registration Control 2 List
Table 1 NVM 760_Registration Control 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
760-053 RCSetUp1_SW 7 0 255 ACCRS, MOB Setup Individual Enable Switch - O O
bit0~bit3
760-054 RCSetUp2_SW 14 0 255 CLRC Setup Individual Enable Switch - O O
bit0~bit6
760-055 RCSetUp3_SW 3 0 255 CLRC, RTRC Setup Individual Enable Individual Switch - O O
bit0~bit5
760-056 PSKoffset_PL 0 -20 20 PSKoffset_PL Adjustment for Delivery 1pixel@600dpi O O
760-057 BlockMaxA1C 16 1 24 A1/C Batch Maximum Block Amount items O O
6.3.18 NVM 761_Deve 1 List
Table 1 NVM 761_Deve 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
761-001 #Y Temperature Raise ICDC Integrated Value 0 0 4294967295 ICDC Integrated Value for Temperature Raise Band [1Count] Count O O
Make it 0 when performing ProCon Mid/End Setup.
* ICDC when A4 A/C 100% = 10000
761-002 #M Temperature Raise ICDC Integrated Value 0 0 4294967295 ICDC Integrated Value for Temperature Raise Band [1Count] Count O O
Make it 0 when performing ProCon Mid/End Setup.
* ICDC when A4 A/C 100% = 10000
761-003 #C Temperature Raise ICDC Integrated Value 0 0 4294967295 ICDC Integrated Value for Temperature Raise Band [1Count] Count O O
Make it 0 when performing ProCon Mid/End Setup.
* ICDC when A4 A/C 100% = 10000
761-004 #K Temperature Raise ICDC Integrated Value 0 0 4294967295 ICDC Integrated Value for Temperature Raise Band [1Count] Count O O
Make it 0 when performing ProCon Mid/End Setup.
* ICDC when A4 A/C 100% = 10000
761-005 #Y Temperature Raise Band Deve Cycle 0 0 65535 No. of Deve Cycle for Temperature Raise Band 0.1[Cycle] O O
Make it 0 when performing ProCon Mid/End Setup.
761-006 #M Temperature Raise Band Deve Cycle 0 0 65535 No. of Deve Cycle for Temperature Raise Band 0.1[Cycle] O O
Make it 0 when performing ProCon Mid/End Setup.
761-007 #C Temperature Raise Band Deve Cycle 0 0 65535 No. of Deve Cycle for Temperature Raise Band 0.1[Cycle] O O
Make it 0 when performing ProCon Mid/End Setup.
761-008 #K Temperature Raise Band Deve Cycle 0 0 65535 No. of Deve Cycle for Temperature Raise Band 0.1[Cycle] O O
Make it 0 when performing ProCon Mid/End Setup.
761-009 DEVE Reverse Rotation PV Counter YMC 0 0 1000 DEVE Reverse Rotation PV Counter YMC PV O O
761-010 DEVE Reverse Rotation PV Counter K 0 0 1000 DEVE Reverse Rotation PV Counter YMC PV O O
761-011 Auger Mark Countermeasure Sub Motor PS63 Drive Time 0 0 3000000 Drive Time in Sub Motor 63mm/s (YMC) ms O O
(YMC) Clear after driving for more than the given time with PS=126mm/s.
761-012 Auger Mark Countermeasure Sub Motor PS63 Drive Time 0 0 3000000 Drive Time in Sub Motor 63mm/s (K) ms O O
(K) Clear after driving for more than the given time with PS=126mm/s.
761-013 Auger Mark Countermeasure Sub Motor PS126 Drive 0 0 3000000 Drive Time in Sub Motor 126mm/s (YMC) *Clear at the same time as ms O O
Time (K) clearing of Auger Mark Countermeasure Sub Motor PS63 Drive Time
(YMC).
761-014 Auger Mark Countermeasure Sub Motor PS126 Drive 0 0 3000000 Drive Time in Sub Motor 126mm/s (K) *Clear at the same time as ms O O
Time (K) clearing of Auger Mark Countermeasure Sub Motor PS63 Drive Time
(YMC).
761-023 #Y Deve Low A/C Band Deve Cycle 0 0 65535 No. of Deve Low A/C Band Deve Cycle 0.1[Cycle] O O
761-024 #M Deve Low A/C Band Deve Cycle 0 0 65535 No. of Deve Low A/C Band Deve Cycle 0.1[Cycle] O O
761-025 #C Deve Low A/C Band Deve Cycle 0 0 65535 No. of Deve Low A/C Band Deve Cycle 0.1[Cycle] O O
761-026 #K Deve Low A/C Band Deve Cycle 0 0 65535 No. of Deve Low A/C Band Deve Cycle 0.1[Cycle] O O
761-027 R/L Determination Job Counter BW 0 0 1000 Counts the no. of Job during Procon ADC Setup Interval. Times O O
761-028 R/L Determination Job Counter FC 0 0 1000 Counts the no. of Job during Procon ADC Setup Interval. Times O O

Version 1.1 05/2014 6.3.18 NVM 761_Deve 1 List

6-171
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-172 6.3.18 NVM 761_Deve 1 List
6.3.19 NVM 762_Deve 2 List
Table 1 NVM 762_Deve 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
762-025 Deve Temperature Raise Band Switch 0 0 1 Temperature Raise Band Execution Selection Switch - O O
0: Do not Execute, 1: Perform
762-038 #Y Temperature Raise Bank Average A/C 0 0 1000 Average A/C calculated when Temperature Raise Band is decided 0.1[%] O O
762-039 #M Temperature Raise Band Average A/C 0 0 1000 Average A/C calculated when Temperature Raise Band is decided 0.1[%] O O
762-040 #C Temperature Raise Band Average A/C 0 0 1000 Average A/C calculated when Temperature Raise Band is decided 0.1[%] O O
762-041 #K Temperature Raise Band Average A/C 0 0 1000 Average A/C calculated when Temperature Raise Band is decided 0.1[%] O O
762-042 Y No. of times Temperature Raise Band was cre- 0 0 20000 No. of times Temperature Raise Band was created. * Clear with HFSI Times O O
ated reset
762-043 M No. of times Temperature Raise Band was cre- 0 0 20000 No. of times Temperature Raise Band was created. * Clear with HFSI Times O O
ated reset
762-044 C No. of times Temperature Raise Band was cre- 0 0 20000 No. of times Temperature Raise Band was created. * Clear with HFSI Times O O
ated reset
762-045 K No. of times Temperature Raise Band was cre- 0 0 20000 No. of times Temperature Raise Band was created. * Clear with HFSI Times O O
ated reset
762-046 Temperature Raise Band Width Integrated Value Y 0 0 50000000 Temperature Raise Band Width Integrated Value. * Clear with HFSI reset 0.1[mm] O O
762-047 Temperature raise Band Width Integrated Value M 0 0 50000000 Temperature Raise Band Width Integrated Value. * Clear with HFSI reset 0.1[mm] O O
762-048 Temperature Raise Band Width Integrated Value C 0 0 50000000 Temperature Raise Band Width Integrated Value. * Clear with HFSI reset 0.1[mm] O O
762-049 Temperature Raise Band Width Integrated Value K 0 0 50000000 Temperature Raise Band Width Integrated Value. * Clear with HFSI reset 0.1[mm] O O
762-050 Decay Agitation Execution SW 0 0 1 Decay Agitation Execution SW - O O
0: Do not execute Entry Determination, 1: Execute Entry determination
762-051 Decay Entry Threshold Value 7 0 30 Decay Entry Threshold Value [hour] - O O
(For comparison with the time from the Deve Motor Off to the Entry Deter-
mination)
762-052 Decay Temperature Determination Threshold Value 25 0 30 Decay Temperature Determination Threshold Value [degrees] (To com- - O O
pare with the temp during Entry)
762-053 Decay Humidity Determination Threshold Value 75 0 100 Decay Humidity Determination Threshold Value [%] (To compare with the - O O
temp during Entry)
762-054 Store SubMot Stop Time (BW) 0 0 4294967295 Acquires the stop time of Sub Motor during BW Mode. minute O O
762-055 Store SubMot Stop Time (FC) 0 0 4294967295 Acquires the stop time of Sub Motor during FC Mode. minute O O
762-056 Decay Setup Length 7560 0 30160 Decay Panel Length mm O O
762-057 DEVE Reverse Rotation SW 0 0 3 DEVE Reverse Rotation Perform SW - O O
0: Do not perform, 1: Execute only in BW, 2: Execute only in FC, 3: Exe-
cute in all Modes
762-058 DEVE Reverse Rotation PV Threshold Value 40 0 1000 DEVE Reverse Rotation PV Threshold Value PV O O
762-059 DEVE Reverse Rotation Time 100 50 200 DEVE Reverse Rotation PV 10[ms] O O
762-060 Auger Mark Countermeasure SW 0 0 1 Performance Switch for Auger Mark Countermeasure - O O
0: Do not perform, 1: Perform

Version 1.1 05/2014 6.3.19 NVM 762_Deve 2 List

6-173
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-174 6.3.19 NVM 762_Deve 2 List
Table 1 NVM 762_Deve 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
762-061 Auger Mark Countermeasure Temperature Thresh- 27 0 100 Performance Determination Temperature Threshold Value for Auger Mark Degree O O
old Value Countermeasure
Perform when the temperature is above than this.
762-062 Auger Mark Countermeasure Humidity Threshold 75 0 100 Performance Determination Humidity Threshold Value for Auger Mark % O O
Value Countermeasure
Perform when the humidity is above than this.
762-063 Auger Mark Countermeasure Time Threshold Value 45 0 2500 Performance Determination Time Threshold Value for Auger Mark Coun- Seconds O O
termeasure
Perform then the developing machine drive time with 63mm/s is more than
this threshold value.
762-064 Auger Mark Countermeasure YMC Time Threshold 50 1 100 YMC Auger Mark Countermeasure Time Threshold Value Adjustment % O O
Value Adjustment Ratio Ratio from Auger Mark Countermeasure of K is performed.
Make 1~100% of [Auger Mark Countermeasure Time Threshold Value].
762-065 Auger Mark Countermeasure Perform Time 40 1 100 No-Loading Time when Auger Mark Countermeasure is performed Seconds O O
762-080 Deve Low A/C Band Switch 1 0 2 Deve Low A/C Band Execution Selection Switch - O O
0: Do not Execute, 1: Perform, 2: Perform with Control Mode]
Performance Judgement A/C Threshold Value, A/C Target Value changes
in Control Mode
762-081 Deve Low A/C Band Creation Interval 40 0 200 ADC MID Demand determination Interval PV O O
762-082 ADC MID Request Judgement Band Width Thresh- 1950 1000 10000 ADC MID Request Judgement Band Width Threshold Value. *Use only 0.1[mm] O O
old Value when judging the MID SET Request when Deve Low A/C Band Determi-
nation Interval is reached
762-083 High Load Determination No. of sheets 600 0 8000 High Load Mode Determination Threshold Value sheets O O
762-084 Mid Load Determination No. of sheets 100 0 8000 Mid Load Mode Determination Threshold Value sheets O O
762-085 Low R/L Determination Threshold Value 32 0 255 If the PV per 1 Job is lower than this Threshold Value, conduct the Deve 0.1 O O
Low A/C Band Control in Low R/L Mode. [sheets]
762-086 A4L Deve Cycle count Reduced Value (In High R/L 157 10 250 No. of Deve rotation equivalent to A4L (For High R/L Mode): FC_R/L100 0.1[Cycle] O O
Mode) Trial Calculation Value
(Used for Load Determination as well)
762-087 A4L Deve Cycle count Reduced Value (In Low R/L 183 10 250 No. of Deve rotation equivalent to A4L (For Low R/L Mode): FC_R/L2 Trial 0.1[Cycle] O O
Mode) Calculation Value
762-088 Deve Low A/C Toner Band density 100 60 100 Deve Low A/C Toner Band Density % O O
762-089 Deve Low A/C Toner Band Width Upper Limit 2400 1000 10000 Deve Low A/C Toner Band Width Upper Limit 0.1[mm] O O
762-090 No. of Deve Low A/C Toner Band Created Y 0 0 20000 No. of Deve Low A/C Toner Band Created * Clear with HFSI reset Times O O
762-091 No. of Deve Low A/C Toner Band Created M 0 0 20000 No. of Deve Low A/C Toner Band Created * Clear with HFSI reset Times O O
762-092 No. of Deve Low A/C Toner Band Created C 0 0 20000 No. of Deve Low A/C Toner Band Created * Clear with HFSI reset Times O O
762-093 No. of Deve Low A/C Toner Band Created K 0 0 20000 No. of Deve Low A/C Toner Band Created * Clear with HFSI reset Times O O
762-094 Deve Low A/C Toner Band Width Integrated Value 0 0 50000000 Deve Low A/C Toner Band Width Integrated Value. * Clear with HFSI 0.1[mm] O O
Y reset
762-095 Deve Low A/C Toner Band Width Integrated Value 0 0 50000000 Deve Low A/C Toner Band Width Integrated Value. * Clear with HFSI 0.1[mm] O O
M reset
 Table 1 NVM 762_Deve 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
762-096 Deve Low A/C Toner Band Width Integrated Value 0 0 50000000 Deve Low A/C Toner Band Width Integrated Value. * Clear with HFSI 0.1[mm] O O
C reset
762-097 Deve Low A/C toner Band Width Integrated Value K 0 0 50000000 Deve Low A/C Toner Band Width Integrated Value. * Clear with HFSI 0.1[mm] O O
reset
762-098 Deve Low A/C Band Perform Determination A/C 20 0 1000 Deve Low A/C Band Perform Determination A/C Threshold Value 0.1[%] O O
Threshold Value During Low R/L, Low Load, Non-Control Mode
(Low R/L, Low Load, Non-Control Mode)
762-099 Deve Low A/C Band Perform Determination A/C 5 0 1000 Deve Low A/C Band Perform Determination A/C Threshold Value 0.1[%] O O
Threshold Value When Low R/L, Low Load, Control Mode
(Low R/L, Low Load, Control Mode)
762-100 Deve Low A/C Band Perform Determination A/C 20 0 1000 Deve Low A/C Band Perform Determination A/C Threshold Value 0.1[%] O O
Threshold Value During Low R/L, Mid Load, Non-Control Mode
(Low R/L, Mid Load, Non-Control Mode)
762-101 Deve Low A/C Band Perform Determination A/C 5 0 1000 Deve Low A/C Band Perform Determination A/C Threshold Value 0.1[%] O O
Threshold Value During Low R/L, Mid Load, Control Mode
(Low R/L, Mid Load, Control Mode)
762-102 Deve Low A/C Band Perform Determination A/C 20 0 1000 Deve Low A/C Band Perform Determination A/C Threshold Value 0.1[%] O O
Threshold Value During Low R/L, High Load, Non-Control Mode
(Low R/L, High Load, Non-Control Mode)
762-103 Deve Low A/C Band Perform Determination A/C 5 0 1000 Deve Low A/C Band Perform Determination A/C Threshold Value 0.1[%] O O
Threshold Value During Low R/L, High Load, Control Mode
(Low R/L, High Load, Control Mode)
762-104 Deve Low A/C Band Perform Determination A/C 23 0 1000 Deve Low A/C Band Perform Determination A/C Threshold Value 0.1[%] O O
Threshold Value During High R/L, Low Load, Non-Control Mode
(High R/L, Low Load, Non-Control Mode)
762-105 Deve Low A/C Band Perform Determination A/C 5 0 1000 Deve Low A/C Band Perform Determination A/C Threshold Value 0.1[%] O O
Threshold Value During High R/L, Low Load, Control Mode
(High R/L, Low Load, Control Mode)
762-106 Deve Low A/C Band Perform Determination A/C 23 0 1000 Deve Low A/C Band Perform Determination A/C Threshold Value 0.1[%] O O
Threshold Value During High R/L, Mid Load, Non-Control Mode
(High R/L, Mid Load, Non-Control Mode)
762-107 Deve Low A/C Band Perform Determination A/C 5 0 1000 Deve Low A/C Band Perform Determination A/C Threshold Value 0.1[%] O O
Threshold Value During High R/L, Mid Load, Control Mode
(High R/L, Mid Load, Control Mode)
762-108 Deve Low A/C Band Perform Determination A/C 23 0 1000 Deve Low A/C Band Perform Determination A/C Threshold Value 0.1[%] O O
Threshold Value During High R/L, High Load, Non-Control Mode
(High R/L, High Load, Non-Control Mode)
762-109 Deve Low A/C Band Perform Determination A/C 5 0 1000 Deve Low A/C Band Perform Determination A/C Threshold Value 0.1[%] O O
Threshold Value During High R/L, High Load, Control Mode
(High R/L, High Load, Control Mode)
762-110 A/C Target Value after performing Deve Low A/C 5 0 1000 Set the Band width to supplement the A/C shortage in this target value 0.1[%] O O
Band when performing Deve Low A/C Band. During Low R/L, Low Load, Non-
(Low R/L, Low Load, Non-Control Mode) Control Mode

Version 1.1 05/2014 6.3.19 NVM 762_Deve 2 List

6-175
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-176 6.3.19 NVM 762_Deve 2 List
Table 1 NVM 762_Deve 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
762-111 A/C Target Value after performing Deve Low A/C 5 0 1000 Set the Band width to supplement the A/C shortage in this target value 0.1[%] O O
Band when performing Deve Low A/C Band. When Low R/L, Low Load, Control
(Low R/L, Low Load, Control Mode) Mode
762-112 A/C Target Value after performing Deve Low A/C 10 0 1000 Set the Band width to supplement the A/C shortage in this target value 0.1[%] O O
Band when performing Deve Low A/C Band. During Low R/L, Mid Load, Non-
(Low R/L, Mid Load, Non-Control Mode) Control Mode
762-113 A/C Target Value after performing Deve Low A/C 5 0 1000 Set the Band width to supplement the A/C shortage in this target value 0.1[%] O O
Band when performing Deve Low A/C Band. During Low R/L, Mid Load, Control
(Low R/L, Mid Load, Control Mode) Mode
762-114 A/C Target Value after performing Deve Low A/C 22 0 1000 Set the Band width to supplement the A/C shortage in this target value 0.1[%] O O
Band when performing Deve Low A/C Band. During Low R/L, High Load, Non-
(Low R/L, High Load, Non-Control Mode) Control Mode
762-115 A/C Target Value after performing Deve Low A/C 5 0 1000 Set the Band width to supplement the A/C shortage in this target value 0.1[%] O O
Band when performing Deve Low A/C Band. During Low R/L, High Load, Con-
(Low R/L, High Load, Control Mode) trol Mode
762-116 A/C Target Value after performing Deve Low A/C 8 0 1000 Set the Band width to supplement the A/C shortage in this target value 0.1[%] O O
Band when performing Deve Low A/C Band. During Low R/L, Low Load, Non-
(High R/L, Low Load, Non-Control Mode) Control Mode
762-117 A/C Target Value after performing Deve Low A/C 5 0 1000 Set the Band width to supplement the A/C shortage in this target value 0.1[%] O O
Band when performing Deve Low A/C Band. When Low R/L, Low Load, Control
(High R/L, Low Load, Control Mode) Mode
762-118 A/C Target Value after performing Deve Low A/C 16 0 1000 Set the Band width to supplement the A/C shortage in this target value 0.1[%] O O
Band when performing Deve Low A/C Band. During Low R/L, Mid Load, Non-
(High R/L, Mid Load, Non-Control Mode) Control Mode
762-119 A/C Target Value after performing Deve Low A/C 5 0 1000 Set the Band width to supplement the A/C shortage in this target value 0.1[%] O O
Band when performing Deve Low A/C Band. During Low R/L, Mid Load, Control
(High R/L, Mid Load, Control Mode) Mode
762-120 A/C Target Value after performing Deve Low A/C 28 0 1000 Set the Band width to supplement the A/C shortage in this target value 0.1[%] O O
Band when performing Deve Low A/C Band. During Low R/L, High Load, Non-
(High R/L, High Load, Non-Control Mode) Control Mode
762-121 A/C Target Value after performing Deve Low A/C 5 0 1000 Set the Band width to supplement the A/C shortage in this target value 0.1[%] O O
Band when performing Deve Low A/C Band. During Low R/L, High Load, Con-
(High R/L, High Load, Control Mode) trol Mode
762-163 Deve Low A/C Band Calculation A/C Y 0 0 1000 Deve Low A/C Band Calculation A/C Value Y 0.1[%] O O
762-164 Deve Low A/C Band Calculation A/C M 0 0 1000 Deve Low A/C Band Calculation A/C Value M 0.1[%] O O
762-165 Deve Low A/C Band Calculation A/C C 0 0 1000 Deve Low A/C Band Calculation A/C Value C 0.1[%] O O
762-166 Deve Low A/C Band Calculation A/C K 0 0 1000 Deve Low A/C Band Calculation A/C Value K 0.1[%] O O
762-167 Deve Load A/C Band Calculation Load Mode Y 0 0 2 Deve Low A/C Band Calculation Load Mode Y - O O
0: Low Load, 1: Mid Load, 2: HIgh Load
762-168 Deve Low A/C Band Calculation Load Mode M 0 0 2 Deve Low A/C Band Calculation Load Mode M - O O
0: Low Load, 1: Mid Load, 2: HIgh Load
 Table 1 NVM 762_Deve 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
762-169 Deve Low A/C Band Calculation Load Mode C 0 0 2 Deve Low A/C Band Calculation Load Mode C - O O
0: Low Load, 1: Mid Load, 2: HIgh Load
762-170 Deve Low A/C Band Calculation Load Mode K 0 0 2 Deve Low A/C Band Calculation Load Mode K - O O
0: Low Load, 1: Mid Load, 2: HIgh Load
762-171 Deve Low A/C Band Calculation R/L Mode Y 0 0 1 Deve Low A/C Band Calculation R/L Load Mode Y - O O
0: Low R/L Mode, 1: High R/L Mode
762-172 Deve Low A/C Band Calculation R/L Mode M 0 0 1 Deve Low A/C Band Calculation R/L Load Mode M - O O
0: Low R/L Mode, 1: High R/L Mode
762-173 Deve Low A/C Band Calculation R/L Mode C 0 0 1 Deve Low A/C Band Calculation R/L Load Mode C - O O
0: Low R/L Mode, 1: High R/L Mode
762-174 Deve Low A/C Band Calculation R/L Mode K 0 0 1 Deve Low A/C Band Calculation R/L Load Mode K - O O
0: Low R/L Mode, 1: High R/L Mode

Version 1.1 05/2014 6.3.19 NVM 762_Deve 2 List

6-177
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-178 6.3.19 NVM 762_Deve 2 List
6.3.20 NVM 767_Marking System 1 List
Table 1 NVM 767_Marking System 1 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Unit Protected initialized
767-024 CRUM Mode Switch 0 0 1 Mode Change Switch - O O
0: N/A, 1: Change to Xerox Mode
767-042 Color Mode Determination Switch 1 0 1 0: Maintain the latest status, 1: Follow the Cont instruction - O O
767-043 Latest Color Mode 1 0 1 0: BW, 1: 4C - O O
767-047 1st BTR Initialize Operation Switch 1 0 2 0: Do not perform. - O O
1: Only perform when Power On.
2: Perform in Power On, Interlock Close, Sleep Recovery.
767-059 Lead Image Loss Amount 40 40 255 The amount of image erasure at the Lead Edge in the paper feed direction for the 0.1[mm] O O
printed image
767-060 Side Image Loss Amount 20 20 255 The amount of image erasure at the Lead Edge in the paper feed direction for the 0.1[mm] O O
printed image
767-061 End Image Loss Amount 20 20 255 The amount of image erasure at the Rear End in the paper feed direction for the printed 0.1[mm] O O
image
767-127 Lead Edge Erase Amount 40 40 255 Lead Edge Erase Amount 0.1[mm] O O
767-128 Side Erase Amount 20 20 255 Side Edge Erase Amount 0.1[mm] O O
767-129 Tail Edge Erase Amount 20 20 255 Tail Edge Erase Amount 0.1[mm] O O

Version 1.1 05/2014 6.3.20 NVM 767_Marking System 1 List

6-179
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-180 6.3.20 NVM 767_Marking System 1 List
6.3.21 NVM 980_Marking System 2 List
Table 1 NVM 980_Marking System 2 List
Write
Default Minimum Maximum Allowed/ Can be
Chain-Link NVM Name Value value value Description Protected initialized
980-001 CRUM Mode Information 0 0 3 Stores the CRUM control status. X X
= 0: Xerox Mode (with communications with the CRUM)
= 1: 3rd Party Mode (no communications with the Drum/Toner CRUM)
= 2: 3rd Party Mode (no communications with the Toner CRUM only)
= 3: Cooperation Verification Mode (No communication with DRUM/TONER
CRUM)

Version 1.1 05/2014 6.3.21 NVM 980_Marking System 2 List

6-181
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-182 6.3.21 NVM 980_Marking System 2 List
6.3.22 System Data (FAX Service)
Table 1 6.3.22 System_Data (FAX Service)
Chain-Link NVM Name Detailed Description OFF/ON Default Value Setting Range
701-009 Destination Secondary Priority Order Indication 1 0: Destination Name (Displayed only
Setting of Communication Maintenance Report during original protocol)
1: Tel Number
701-010 FAX Receiving Sending Setting O 0 0: Do not transfer
1: Transmit only during error
2: Always transmit
3: Always Email transmit
4: Always Server transmit
701-011 Print Setting during FAX Receiving Sending O 0 0: Do not print when transmit
1: Print when transmit
701-012 Process when Print setting does not print dur- O 1 0: Do not print
ing sending error and transmitting of FAX 1: Print
receiving and sending
790-401 Specify the resolution when receiving 0x00 0x00: Normal
0x01: 400,300,200,100
0x02: R16x15.4, R8x15.4, R8x7.7,
R8x3.85
0x04: R8x15.4, R8x7.7, RR8x3, 85
0x08: 300, 200, 100
0x10: 200, 100
0x20: R8x7.7, R8x3.85
0x40: 100
0x80: R8x3.85
821-101 Operation Mode Needs to be set to [1] if FAX communication Monitor sounds 0 0: Normal Mode
are coming out from speakers. 1: Maintenance Mode
821-201 Operation after error such as memory over from Decides the operation when error occurs during sending accu- 1 0: Erase All
sending accumulation mulation. [1] when sending FAX up to the end of Read page, 1: Issue Accumulated Document
[0] when deleting all read page.
821-202 Pause FAX receiving, 0 0~100:0%~100%
Memory remaining value (%) threshold value
for No FAX Receiving (when Color FAX is dis-
abled)
821-203 Move to Immediate Receiving 20 0~99:0%~99%
Remaining Memory (%)Threshold Value
821-204 Stop Sending Accumulation, 0 0~100:0%~100%
Do not allow Sending Accumulation Start
Remaining Memory (%)Threshold Value
821-205 Color FAX Disable/Enable O 0 0: Disabled
1: Enabled
821-206 Memory remaining value (%) threshold value 0 0: 0.5MB
for No FAX Receiving (when Color FAX is 1: 1.0MB
enabled) 2: 1.5MB

Version 1.1 05/2014 6.3.22 System_Data (FAX Service)

6-183
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-184 6.3.22 System_Data (FAX Service)
Table 1 6.3.22 System_Data (FAX Service)
Chain-Link NVM Name Detailed Description OFF/ON Default Value Setting Range
821-207 Start Garbage Collection 50 0~99:0%~99%
Remaining Memory (%)Threshold Value
821-401 Page Split Margin 20 0~127: 0mm~127mm
(When RECEIVE_REDUCTION is 2)
821-403 Auto Reduce O 2 0: Page Break
1: Discard without Page Break
2: Auto Reduce On
821-406 Maximum Value of 1 page data amount for 16 0~64: 0~4MB
color receiving (1step=64KB)
821-407 Duple Print Setting when Printing O 0 0: OFF
1: ON
821-411 Auto Eject Communication Maintenance Report 1 0: OFF
1: ON
821-412 Page Split Margin 30 0~127:0mm~127mm
(When RECEIVE_REDUCTION is 2)
821-413 Print on a large recording paper O 1 0: Do not Print
1: Print
825-002 Line Type O 0 0: PSTN
1: PBX
825-003 Dial Type 0 0: PB
1: DP10
2: DP20
825-004 Time until relay is switched when pulse dialing Time until PB is switched when pulse dialing in [:]. PB will be 1 0~255: 0ms~2550ms
(waiting time for line to stabilize) sent after waiting for this system data value time after dial 1STEP/10ms
pulse.
825-005 Allow/Prohibit DRPD Setting DISTINCTIVE RING Setting O 1 0: Prohibit
1: Allowed
825-006 DRPD Setting Fax Auto Switch O 4 0: reserve
1: pattern1
2: pattern2
3: pattern3
4: pattern4
5: pattern5
6: pattern6
7: pattern7
825-013 20PPS Pulse Dial If this is prohibited, even 20PPS is instructed for Dial Type 1 0: Allow DP20
[DIAL_TYPE] it will still operate in 10PPS. 1: Prohibit
825-014 Auto Receiving Switch Mode 1 0: Tel Only
1: FAX Only
2: TEL/FAX
3: ANS/FAX
4: DRPD
825-015 CNG Detection Time 165 0~255: 0s~25.5s
 Table 1 6.3.22 System_Data (FAX Service)
Chain-Link NVM Name Detailed Description OFF/ON Default Value Setting Range
825-016 External Telephone Call Time 21 0~255: 0s~255s
(Time to Ring a sound from speaker if CNG is
not detected after incoming call)
825-017 External Telephone Call Time during TEL/FAX O 6 0~255: 0s~255s
Switch Mode
825-018 External Telephone Call Time during Answer- O 21 0~255: 0s~255s
ing Machine Connection Mode
825-019 Call Time for FAX only O 0 0~255: 0s~255s
825-025 (14/0.5)Ring Signal Cycle Minimum Value Setting of detection possible cycle of Ring Signal 28 8~255: 4ms~127.5ms
(1step=0.5ms)
825-026 (100/0.5)Ring Signal Cycle Maximum Value Setting of detection possible cycle of Ring Signal 200 8~255: 4ms~127.5ms
(1step=0.5ms)
825-027 Dial Tone Frequency Dial Tone Detection possible frequency setting. 3 0: 350Hz~450Hz
It is unused. 1: 300Hz~500Hz
2: 450Hz~650Hz
3: 245Hz~650Hz
825-028 Busy Tone Frequency Busy Tone Detection possible frequency setting 3 0: 400Hz
1: 350Hz~450Hz
2: 300Hz~500Hz
3: 450Hz~650Hz
4: 245Hz~650Hz
825-029 Busy Tone Pattern Busy Tone Detection possible Pattern Setting 1 0: ON/OFF 0.4~0.6s (2 times)
1: ON/OFF 0.2~0.3s (4 times), ON/
OFF 0.4~0.6s (2 times)
2: ON/OFF 0.2~0.3s (4 times)
3: ON/OFF 0.12~0.44s (3 times)
4: ON/OFF 0.3~0.8s (2 times)
5: ON/OFF 0.2~0.6s (2 times)
6: ON/OFF 0.5~1s (2 times)
7: ON/OFF 0.12~1.2s (2 times)
8: ON 800~1.2S,OFF 3.2~4.8s (2
times)
825-030 Allow/Prohibit Busy Tone Detection during out- Busy Tone Detection Setting 1 0: Prohibit
going call 1: Allowed
825-031 No. of Resend Making the outgoing call again for no. of this system data shall O 1 0~5: 0time~5times
be decided by the following requirements.
[When Busy Tone Detection[Prohibited]]
· Error occurred during FAX communication
[When Busy Tone Detection[Allowed]]
· Error occurred during FAX communication
· End when destination does not answer

Version 1.1 05/2014 6.3.22 System_Data (FAX Service)

6-185
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-186 6.3.22 System_Data (FAX Service)
Table 1 6.3.22 System_Data (FAX Service)
Chain-Link NVM Name Detailed Description OFF/ON Default Value Setting Range
825-032 Redial Attempt Making the outgoing call again for no. of this system data shall O 3 0~9: 0time~9times
be decided by the following requirements.
[When Busy Tone Detection[Prohibited]]
· End when destination does not answer
[When Busy Tone Detection[Allowed]]
· End by Busy Tone Detection
825-033 Maximum No. of Redial 14 0~255: 0time~255times
825-034 Redial Interval O 1 1~15: 1min~15min
825-035 FAX Communication Interval Interval time for independent communication interval. Always O 8 3~255: 3s~255s
wait for this system data time between outgoing call and out- 1STEP/1S
going call.
825-036 Same Destination Check for Re-Outgoing Call 1 0: OFF
1: ON
825-037 Interval time to same destination 60 1~255: 1s~255s
825-045 RingThreshold This is the setting of DAA Register 730. 0xE8 0x00~0xFF
825-046 Complex This is the setting of DAA Register 731. 0x02 0x00~0x02
825-047 DCCurve This is the setting of SiDAA Register 733. 0x02 0x00~0x04
825-048 Rmake This is the setting of SiDAA Register 734. 0x01 0x00~0xFF
825-049 FastEdgePulseDial This is the setting of SiDAA Register 74F. 0x01 0x00~0x01
825-050 SiDAA Operation Mode By [OR] each Bit in this system data, you can decide the sys- 0x00 0x00~0xFF
tem data usage of setting value by country. 0x01: Reserve
0x01:Reserve 0x02: Reserve
0x02:Reserve 0x04: RING check with line monitor
0x04:Decide whether to detect RING when Line Monitor is ON
ON. 0x08:Reserve
0x08:Reserve 0x10: Reserve
0x10:Reserve 0x20: Reserve
0x20:Reserve 0x40: Reserve
0x40:Reserve 0x80: Reserve
0x80:Reserve
825-054 Off HOOK Threshold Value Selection Selecting External Telephone HOOK Detection Threshold O 1 0: Low
Value 1: Medium
2: High
825-060 DM Prevention Function O 0 0: Prohibit
1: Allowed
825-062 No. of Dial Pulse Select No. of DP Pulse 0 0: N
1: 10-N
2: N+1
825-063 PB Output Time PB (DTMF) Signal Sending Time 100 0~255: 0ms~255ms
1STEP/1ms
825-064 PB Pause Time PB Minimum pause time 120 0~255: 0ms~255ms
1STEP/1ms
825-065 DTMF Sending Attenuator Level DTMF Sending Level Setting 6 4~15: -4dbm~-15dBm
 Table 1 6.3.22 System_Data (FAX Service)
Chain-Link NVM Name Detailed Description OFF/ON Default Value Setting Range
825-066 DTMF Highh/Low Frequency Level Difference High frequency, Low frequency level difference setting for PB 0 0: 0dB
(DTMF) Dial. 1: 2.5dB
Level Difference: High frequency/Low frequency 2: 3.0dB
3: 3.5dB
4: 4.0dB
5: 4.5dB
6: 5.0dB
12: 0dB
13: 0.5dB
14: 1.0dB
15: 1.5dB
825-067 10PPS Make TIme 31 1~106: 1ms~106ms
1STEP/1ms
825-068 10PPS Break Time 67 1~106: 1ms~106ms
1STEP/1ms
825-069 10PPS Make TIme 16 1~106: 1ms~106ms
1STEP/1ms
825-070 10PPS Break Time 34 1~106: 1ms~106ms
1STEP/1ms
825-071 DP Inter Digit Pause Time 36 0~255: 0ms~5110ms
1STEP/20ms
825-072 (4/0.1) Pause Time This is the Pause Down Time. When dialing Pause[-], dial the 40 0~255: 0ms~25500ms
next next dial data after waiting for the system data time. 1STEP/100ms
825-073 Blind Dial Time Time to start dialing after line closed when connecting to PBX 3 3~255: 3s~255s
(1.3secs will be added to the setting value from the Modem -- Apply the following setting range
Restriction) only for South Africa setting
1~255: 1s~255s
825-074 Dial Tone Detection Timeout Time This will be used as Timeout when Dial Tone cannot be 20 0~255: 0s~255s
detected. 1STEP/1S
825-079 ONHOOK Detection Time This is the time it takes to determine the external telephone is 65 10~255: 200ms~5100ms
ONHOOK. 1STEP/20ms
825-080 OFFHOOK Detection Time when there is no This is the time it takes to determine the external telephone is 15 15~255s: 300ms~5100ms
RING signal in line OFFHOOK when there is no RING signal coming in. 1STEP/20ms
825-081 OFFHOOK Detection time when there is RING This is the time it takes to determine the external telephone is 15 15~255ms 300ms~5100ms
signal in the line. OFFHOOK when there is RING signal coming in. 1STEP/20ms
825-083 Ring Volume Setting O 3 0: Mute
1: Soft
2: Normal
3: Loud
825-084 External Telephone Call frequency ON 1step/0.5 micro-s 62500 6250~65535: 3125 micro-s~31250
micro-s
825-085 External Telephone Call frequency OFF 1step/0.5 micro-s 62500 6250~65535: 3125 micro-s~31250
micro-s

Version 1.1 05/2014 6.3.22 System_Data (FAX Service)

6-187
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-188 6.3.22 System_Data (FAX Service)
Table 1 6.3.22 System_Data (FAX Service)
Chain-Link NVM Name Detailed Description OFF/ON Default Value Setting Range
825-086 External Telephone Call ON TimeT1 Rumbling Pattern during quasi-RING Back tone/External 50 5~250: 100ms~5000ms
Speaker Rumbling ON Time1 1STEP/20ms
825-087 External telephone call OFF Time T2 Rumbling Pattern during quasi-RING Back tone/External 100 5~250: 100ms~5000ms
Speaker Rumbling OFF Time1 1STEP/20ms
825-088 External Telephone Call ON TimeT3 Rumbling Pattern during quasi-RING Back tone/External 50 5~250: 100ms~5000ms
Speaker Rumbling ON Time2 1STEP/20ms
825-089 External telephone call ON Time T4 Rumbling Pattern during quasi-RING Back tone/External 100 5~250: 100ms~5000ms
Speaker Rumbling OFF Time2 1STEP/20ms
825-090 Detect Dial Tone in Public Line Dial Tone Detection Setting during PSTN connection 1 0: Detect
1: Do not Detect
825-092 CED Signal Sending Start Time when manual 1STEP/100ms 0 0~255: 0ms~25500ms
receiving
825-093 CNG Signal Sending Start Time 1STEP/100ms 30 0~255: 0ms~25500ms
825-094 CNG Sending Start Time when manual sending 1STEP/100ms 0 0~255: 0ms~25500ms
825-096 Remote Receiving O 0 0: OFF
1: ON
825-097 Remote Receiving DTMF No.1 O 0 0~9
825-098 Remote Receiving DTMF No.2 O 0 0~9
825-099 Ring ON Decision Time 155 0~255 1step/1ms
825-100 Ring OFF Decision Time 120 0~255 1step/10ms
825-101 Time to determine the Ring has disappeared 55 0~255 1step/100ms
from line
825-102 PrefixDial O 0 0: Do not attach
1: Attach
825-103 PrefixDial Number1 O 0 NULL,’1’,’2’,’3’,’4’,’5’,’6’,’7’,’8’,’9’,’0’,’#’,
’*’
825-104 PrefixDial Number2 O 0 NULL,’1’,’2’,’3’,’4’,’5’,’6’,’7’,’8’,’9’,’0’,’#’,
’*’
825-105 PrefixDial Number3 O 0 NULL,’1’,’2’,’3’,’4’,’5’,’6’,’7’,’8’,’9’,’0’,’#’,
’*’
825-106 PrefixDial Number4 O 0 NULL,’1’,’2’,’3’,’4’,’5’,’6’,’7’,’8’,’9’,’0’,’#’,
’*’
825-107 PrefixDial Number5 O 0 NULL,’1’,’2’,’3’,’4’,’5’,’6’,’7’,’8’,’9’,’0’,’#’,
’*’
825-108 SiDAA Manual Calibration 0 0: OFF
1: ON
825-110 Dial Tone Pattern Detection 0 0: Do not detect Pattern (detect with
more than continuous 800ms
1: Detect Pattern
825-111 Dial Tone ON/OFF Time Lower Limit 10 8~255 1step/10ms
825-112 Dial Tone ON/OFF Time Upper Limit 100 8~255 1step/10ms
825-201 NCU Country Relay Setting Add for South Africa/Mexico Testing. 0 0: Disabled
1: Enabled
 Table 1 6.3.22 System_Data (FAX Service)
Chain-Link NVM Name Detailed Description OFF/ON Default Value Setting Range
825-202 FastEdgePulseDial2 This is the setting of DAA Register 732. 0x00 0x00~0x02
825-203 DAA SSD Register 0x02 Setting 0xFD 0x00~0xFF
825-601 Line Monitor Setting O 1 0: OFF
1: ON
825-602 Line Monitor Volume O 2 0: Mute
1: Soft
2: Normal
3: Loud
825-604 CED Detection Time 1STEP/20ms 25 25~255:
825-666 Manual Sending CNG Sending 1 0: Off
1: On
825-605 Select CNG Sending Stop Determination 0 0,1,2
0: CED & V.21 Preamble Detection
1: CED Detection
2: V21 Preamble Detection
825-608 RTN Command Sending Reference (Ratio) 1STEP/1% 5 0~100: 0%~100%
825-609 RTN Command Sending Reference (No. of 1STEP/1line 5 0~255: 0line~255line
continuous line)
825-610 T1 Timer Value immediately after outgoing call 1STEP/1S 50 0~255: 0s~255s
825-611 T1 Timer Value when sending 1STEP/1S 36 0~255: 0s~255s
825-612 T1 Timer Value when receiving 1STEP/1S 39 0~255: 0s~255s
825-613 T2 Timer Value 1STEP/100ms 60 0~255: 0s~25.5s
825-614 T3 Timer Value 1STEP/100ms 150 0~255: 0s~25.5s
825-615 Auto Sending/receiving T4 Timer Value 1STEP/100ms 30 0~255: 0s~25.5s
825-616 Manual Sending/receiving T4 Timer Value 1STEP/100ms 45 0~255: 0s~25.5s
825-617 Silent Time Timer Value 1STEP/1ms 75 0~255: 0ms~255ms
825-618 FSK Monitoring Timer Value 1STEP/1ms 200 0~255: 0ms~255ms
825-619 Image Information Sending Delay Time 1STEP/10ms 50 0~255: 0ms~2500ms
825-620 Image Information receiving Drop Out Monitor- 1STEP/10ms 100 0~255: 0ms~2500ms
ing Timer Value
825-621 NSF · DIS Sending Time 0 0: 3sec
1: 3.45sec
2: 2.55sec
3: 4.5sec

Version 1.1 05/2014 6.3.22 System_Data (FAX Service)

6-189
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-190 6.3.22 System_Data (FAX Service)
Table 1 6.3.22 System_Data (FAX Service)
Chain-Link NVM Name Detailed Description OFF/ON Default Value Setting Range
825-622 Communication Mode when sending (Speed) 0 0: Fall back from maximum ability of
destination machine
1: V27ter 2400
2: V27ter 2400, V27ter 4800
3: V27ter 2400, V27ter 4800, V29
7200, V29 9600
4: V27ter 2400, V27ter 4800, V29
7200, V29 9600
5: V27ter 2400, V27ter 4800, V29
7200, V29 9600, V17 7200, V17 9600,
V17 12000, V17 14400
825-623 Communication Mode when receiving (Speed) 0 0: V27ter+V29+V17
1: V27ter Fall back Mode (only 2400)
2: V27ter (2400,4800)
3: V29 (7200, 9600)
4: V27ter+V29
5: V27ter+V29
825-625 No. of DIS Ignored 0 0~255: 0time~255times
825-626 TSI · CIG Sending Timing 0 0: AUTO
1: Always send
2: Do not send
825-627 CSI Sending 0 0: Send
1: Do not send
825-628 No. of FTT until Fall Back 0 0: All 2FTT
2: All 2FTT
825-629 TCF Signal Determination Reference 0 0: 1.2sec
1: 1sec
825-630 Sending Cable Equalizer 0 0: 0db (0km)
1: 4db (1.9km)
2: 8db (3.6km)
3: 12db (7.2km)
825-631 Receiving Cable Equalizer If the [DAA_REG731:Complex] value is [1], it will fulfill the 0 0: 0db (0km)
communication performance and needs to be set to 1: 4db (1.9km)
[G3M_RX_CABLE_EQU=4]. 2: 8db (3.6km)
(Refer to each country value of current DAA_REG731 and set 3: 12db (7.2km)
the value.) 4: Complex=For 1
825-632 TAP HOLD 0 0: OFF
1: Do TAP Hold
825-633 EP Tone 0 0: Do not give
1: Give
 Table 1 6.3.22 System_Data (FAX Service)
Chain-Link NVM Name Detailed Description OFF/ON Default Value Setting Range
825-634 No. of FIF bytes for sending DIS/DTC signal 10 0: 4Byte System
1: 5Byte System
2: 6Byte System
3: 7Byte System
4: 8Byte System
5: 9Byte System
6: 10Byte System
7: 11Byte System
8: 12Byte System
9: 13Byte System
10: 14Byte System (Maximum Ability)
825-635 ECM Ability 1 0: Without Ability
1: With Ability
825-636 No. of ECM · CTC Send 5 0~7: 0time~7times
825-637 RNR Signal Timer 1STEP/1S 65 0~255: 0s~255s
825-638 4800bps EQM Comparison Value 0x0D 0x00~0x7F
825-639 7200bps EQM Comparison Value 0x10 0x00~0x7F
825-640 9600bps EQM Comparison Value 0x07 0x00~0x7F
825-641 1200bps EQM Comparison Value 0x1c 0x00~0x7F
825-642 14400bps EQM Comparison Value 0x24 0x00~0x7F
825-643 TCM7200bps EQM Comparison Value 0x16 0x00~0x7F
825-644 TCM9600bps EQM Comparison Value 0x22 0x00~0x7F
825-645 Symbol Speed Maximum Permissible Value 5 0: 2400baund
(Valid only when receiving) 1: 2743baund (Unsupported)
2: 2800baund
3: 3000baund
4: 3200baund
5: 3429baund
825-646 Maximum Bit Speed 14 1: 2400 bps
2: 4800 bps
3: 7200 bps
4: 9600bps
5: 12000 bps
6: 14400 bps
7: 16800 bps
8: 19200 bps
9: 21600 bps
10: 24000 bps
11: 26400 bps
12: 28800bps
13: 31200bps
14: 33600bps

Version 1.1 05/2014 6.3.22 System_Data (FAX Service)

6-191
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-192 6.3.22 System_Data (FAX Service)
Table 1 6.3.22 System_Data (FAX Service)
Chain-Link NVM Name Detailed Description OFF/ON Default Value Setting Range
825-647 Symbol Speed Enabling Instruction 0x3D 0x00~0x3D
0x01: 2400baund
0x02: 2743baund (Unsupported)
0x04: 2800baund
0x08: 3000baund
0x10: 3200baund
0x20: 3429baund
825-648 Bit Speed Enabling Instruction1 0xff 0x00~0xFF
0x01: 2400 bps
0x02: 4800 bps
0x04: 7200 bps
0x08: 9600 bps
0x10: 12000 bps
0x20: 14400 bps
0x40: 16800 bps
0x80: 19200 bps
825-649 Bit Speed Enabling Instruction2 0x3F 0x00~0x3F
0x01: 21600 bps
0x02: 24000 bps
0x04: 26400 bps
0x08: 28800 bps
0x10: 31200 bps
0x20: 33600 bps
825-650 Control Channel Bit Speed 0 0: 1200bps
1: 2400 bps
825-653 Bit Speed Selection Threshold Value 0x09 0x00 ~ 0xFF
825-655 V8Te Time 11 0~255: 0~25.5S
1Step/100ms
825-656 Timeout Time from V34 Mode (Phase2) to Con- 30 5~255: 5~255 Sec
trol Channel 1Step/1Sec
825-657 Sets whether to move to G3 Mode or not 1 0: Prohibit
duringV34_CC_TIMER Timeout 1: Allowed
825-658 V34 Ability V.34 Ability Setting 1 0: Without Ability
1: With Ability
825-659 ANSam Signal Maximum Sending Time 1STEP/100ms 40 1~255: 0.1s~25.5s
825-660 Time it takes from Line Closing to ANSam Sig- 1STEP/100ms 22 22~255: 2.2s~25.5s
nal Sending
(1.3secs will be added to the setting value from
the Modem Restriction)
825-661 Sending Encoding Method 3 0: MH
1: MR
2: MMR
3: JBIG
 Table 1 6.3.22 System_Data (FAX Service)
Chain-Link NVM Name Detailed Description OFF/ON Default Value Setting Range
825-662 Receiving Encoding Method 3 0: MH
1: MR
2: MMR
3: JBIG
825-664 Receiving Gain Corrected Value Shifts the Receiving Level Range. 1 -128 ~ 127
(1Step/0.75dB)
825-665 V34 1 Frame Size 0 0: 256octets
1: 64octets
825-667 Tone Sending Level Sending Level Setting 10 0~15: 0dBm ~ -15dBm
825-668 Incoming Call Level Incoming Call Level Setting 0 0: -43dBm
1: -33dBm
2: -21dBm
3: -16dBm
825-669 Accumulate Decode Error occurred Page 1 0: Do not accumulate
1: Accumulate
825-673 LRLTWO (Reference Line) Value 0 0: 3 Line
1: 2 Line
825-701 Fax Communication Speed Setting of Panel Change the following 3 system data all at once 4 0: 2400,
Indication 2400: 1: 4800,
CAPAB_V34= No Ability 2: 9600,
G3M_TX_MODEM_SPEED=1 3: 14400,
G3M_RX_MODEM_SPEED=1 4: 33600
4800:
CAPAB_V34= No Ability
G3M_TX_MODEM_SPEED=2
G3M_RX_MODEM_SPEED=2
9600:
CAPAB_V34= No Ability
G3M_TX_MODEM_SPEED=3
G3M_RX_MODEM_SPEED=4
14400:
CAPAB_V34= No Ability
G3M_TX_MODEM_SPEED=5
G3M_RX_MODEM_SPEED=0
33600:
CAPAB_V34= With Ability
G3M_TX_MODEM_SPEED=0
G3M_RX_MODEM_SPEED=0
825-702 External Telephone HOOK Detection Thresh- Use as External Telephone HOOK Detection Threshold Value 6 0 ~ 255V
old Value 0 when ONHOOK_LVS_THRESH_HI is [0].
If External Telephone HOOK false detection still occurs even
after changing ONHOOK_LVS_THRESH_HI, change either of
EXTEL_HOOK_THRESH_0~2. When doing so, The Voltage
difference value used as the threshold value shall be decided
by using the measured value of line that problem occurred.

Version 1.1 05/2014 6.3.22 System_Data (FAX Service)

6-193
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-194 6.3.22 System_Data (FAX Service)
Table 1 6.3.22 System_Data (FAX Service)
Chain-Link NVM Name Detailed Description OFF/ON Default Value Setting Range
825-703 External Telephone HOOK Detection Thresh- Use as External Telephone HOOK Detection Threshold Value 10 0 ~ 255V
old Value 1 when ONHOOK_LVS_THRESH_HI is [1].
If External Telephone HOOK false detection still occurs even
after changing ONHOOK_LVS_THRESH_HI, change either of
EXTEL_HOOK_THRESH_0~2. When doing so, The Voltage
difference value used as the threshold value shall be decided
by using the measured value of line that problem occurred.
825-704 External Telephone HOOK Detection Thresh- Use as External Telephone HOOK Detection Threshold Value 20 0 ~ 255V
old Value 2 when ONHOOK_LVS_THRESH_HI is [2].
If External Telephone HOOK false detection still occurs even
after changing ONHOOK_LVS_THRESH_HI, change either of
EXTEL_HOOK_THRESH_0~2. When doing so, The Voltage
difference value used as the threshold value shall be decided
by using the measured value of line that problem occurred.
825-705 ETSI standard supported External Telephone Enable/Disable Starting the External Telephone Supplemen- 0 0: Disabled
HOOK Detection Supplementary Processing tary Processing 1: Enabled
825-706 ETSI standard supported External Telephone Voltage Value that determines the External Telephone OFF- 15 10, 15, 20(V)
HOOK Detection Supplementary Processing HOOK of External Telephone Supplementary Processing
825-707 Voltage Threshold Value used for Line Voltage 40 10 ~ 50
Detection 1Step/1V
825-708 Call Time Lower Limit in Auto Receiving Mode If AUTO_ANSWER_DELAY, O 0 0: Disabled
(FAX only, TEL/FAX, ANS/FAX) AUTO_ANSWER_TIME_TELFAX, AUTO_ANSWER_RUSU 1 to 255sec
is setting value or less, make the setting value +100ms.
825-709 Call Time Upper Limit in Auto Receiving Mode If AUTO_ANSWER_DELAY is bigger than the setting value, O 0 0: Disabled
(FAX only, DRPD) change it to setting time 1 to 255sec
825-710 Forbid Dial Pulse If this is prohibited, even 10PPS/20PPS is instructed for Dial O 0 0: Allow DP20
Type [DIAL_TYPE] it will still operate in PB. 1: Prohibit
6.4.1 CE Mode Overview 6.4.2 How To Enter the CE Mode
The CE mode is for the service engineers working for solving troubles at customer sites, and helps them 1. Hold down the [2], and [8] buttons and turn on the power of the MFP.
identify which replaceable part of the MFP causes of the trouble.

Figure 1 j0bs64002

2. Press the [8] button twice, and then press the [5] button once.

Figure 2 j0bs64003

Version 1.1 05/2014 6.4.1 CE Mode Overview

6-195
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-196 6.4.3 Overview of the CE Mode Operation

6.4.3 Overview of the CE Mode Operation 6.4.4 How to Exit the CE Mode
After the CE mode is started, you can use the buttons displayed in the touch panel to operate the CE You can exit the CE mode both from Printer Diag and Fax/Scanner Diag.
mode.
1. Return to the top level of Printer Diag or Fax/Scanner Diag, and use the [Up arrow] or [Down arrow]
There are two types of the diagnostic procedure: Printer Diag and Fax/Scanner Diag. button until the [Complete] appears, and then press the [OK] button.
(e.g.: To exit the CE mode from Printer Diag, display the message below.)
1. Selecting the item to execute the diagnosis
Use the [Up arrow] and [Down arrow] buttons to select the item to execute diagnosis.
2. Confirming the item to execute the diagnosis
Press the [OK] button to confirm the item selected.
3. Executing the diagnosis for the item selected
Follow the message and keep holding down the [OK] button until the diagnosis is started.
If the diagnosis requires changing the parameter value, use the [Up arrow] and [Down arrow] but-
tons and then press the [OK] button.
To execute the diagnosis for other items, press the [<--] (Back) button until the screen returns to the item
to evaluate.

If any error occurs while in the diagnosis or in the middle of selecting parameter values, an error mes-
sage will appear and the processing will stop.

To cancel the error message and return to the menu screen, press the [<--] (Back) button or the [OK] but-
ton. Figure 1 j0bs64004

2. Press the [OK] button.

Figure 2 j0bs64005

3. Press the [OK] button again, and the MPF will exit the CE mode and re-start (same as the power
on).
6.4.5 Menu Tree Table 1 Printer Diag

• Printer Diag Top Menu 1st hierarchy 2nd hierarchy 3rd hierarchy 4th hierarchy
Copy Service
Table 1 Printer Diag
FAX Service
Top Menu 1st hierarchy 2nd hierarchy 3rd hierarchy 4th hierarchy Scan Service
CE Mode Printer Diag ESS Diag All Test Copy Counter M to B
FlashROM Test Copy Counter B to M
EEPROM Test Clear All NVM
DRAM Test Clear Job History
MAC+PHY Test Clear Auditron PV
ASIC Test Clear Device Data
IOT Test
RTC Test Test Print Total Chart ESS
HT Cyan ESS
IOT Diag Digital Input HT Magenta ESS
Digital Output HT Yellow ESS
Analog Input HT Black ESS
NVM Settings Edit NVM HT CMY ESS
Clear IOT NVM IOT NVM HT CMYK ESS
HT Red ESS
Print Info Config Page HT Green ESS
Print Settings HT Blue ESS
Grid2 ESS
Installation Serial No.1 Gradation ESS
Serial No.2 No Image IOT
Serial No.3 Procon OFF ESS
Product No.1 Procon ON ESS
Product No.2 LPH Chart LM1
Product No.3 LPH Chart IBY
HexDump ToneUp [C] 5P
Tone Correction ToneUp [M] 5P
Pixel Counter ToneUp [Y] 5P
Configuration Dip Switch 0 ToneUp [K] 5P
Dip Switch 1 ToneDown [C] 10P
Dip Switch 2 ToneDown [M]10P
Dip Switch 3 ToneDown [Y] 10P
Meter Type Type1 ToneDown [K] 10P
Type2 Calibration Chart
Type3 Parameter Life Deve HSG PV Y
Type4 Deve HSG PV M
Type5 Deve HSG PV C
Print Counter Print Service Deve HSG PV K

Version 1.1 05/2014 6.4.5 Menu Tree

6-197
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-198 6.4.5 Menu Tree
Table 1 Printer Diag Table 2 Fax/Scanner Diag
Top Menu 1st hierarchy 2nd hierarchy 3rd hierarchy 4th hierarchy Top Menu 1st hierarchy 2nd hierarchy 3rd hierarchy 4th hierarchy
Y Drum Ctrg PV Information Scan Counter
M Drum Ctrg PV
C Drum Ctrg PV Scanner Mainte- Scan Counter Clear Counter Clear (FB)
K Drum Ctrg PV nance
IBT Unit Counter Clear
(DADF)
2nd BTR Unit
Auto Shading (Ready to Start)
Fusing Print Count
CVT Auto Shading (Ready to Start)
Fusing Time Count
(Color)
Deodorant Filter
CVT Auto Shading (Ready to Start)
EEPROM Write Cnt
(Gray)
Tray1 F/R/N Roll
LED Calibration (Ready to Start)
Tray2 F/R/N Roll
Componet Check IIT Input
MSI FR Pad
IIT Output
Life Print
DADF Componet DADF IIT Input
Procon Print Check
DADF IIT Output
RTC Set DADF Size Detect (Ready to Start)
Auto Adj.
Exit Mode Complete Exit
Parameter Chain Link

• Fax/Scanner Diag Backup Data All Clear

User Clear
Table 2 Fax/Scanner Diag
System Clear
Top Menu 1st hierarchy 2nd hierarchy 3rd hierarchy 4th hierarchy
User & System Clear
CE Mode Fax/Scanner Diag Board Test All Test System Data Init
Fax Memory Test Fax Flash W/R Test Document Clear
MRAM W/R Test DADF Clear
I/F Test Fax Card I/F Test
FX Chip Test (Ready to Start) Complete
Relay/Signal Test Relay Test
Hook Test
Single Tone Send
DTMF Send
Dial Pulse Send
Ring Back Tone
Data Send
Line Voltage
Line Current
6.4.6 CE Mode Functions Overview Table 1 Function Names and Details (Printer)

Items available to test or execute the diagnosis in the CE mode are listed in the table below. Function Description See
Meter Type Displays the current information of the MeterType.
Table 1 Function Names and Details (Printer)
Function Description See Print Print Ser- Displays the current count of the Print Service.
Counter vice
ESS Diag All Test All Test Performs all ESS Diag tests except for 6.4.7.1
MAC+PHY/USB Host/RTC. Copy Ser- Displays the current count of the Copy Service.
FlashROM Test Calculates the checksum per Flash ROM header 6.4.7.2 vice
area and compares the result with the each area’s FAX Ser- Displays the current count of the FAX Service.
prepared checksum stored in the ROM. vice
EEPROM Test EEPROM Test Writes/reads/verifies the test pattern 6.4.7.3 Scan Ser- Displays the current count of the Scan Service.
in the EEPROM area to be evaluated. vice
DRAM Test Writes the test data in the DRAM area to be evalu- 6.4.7.4 Copy Counter M to B Copies the Master NVM values to the Backup NVM. 6.4.10
ated. (Values will be overwritten with the original
value afterthe test) Copy Counter B to M Copies the Backup NVM values to the Master NVM. 6.4.10
MAC+PHY Test MAC+PHY Test Performs the loopback test for MAC 6.4.7.5
(Media Access Control) and PHY (Physical Layer). Clear All NVM Initializes NVM. ESS (EEPROM) of ESS PWB
ASIC Test Perfoms the Register check test. 6.4.7.6
IOT Test Performs the communication test between IOT. 6.4.7.7 Clear Job History Initializes the job data (log).
RTC Test Performs the RTC test. 6.4.7.8
Clear Auditron PV Clear total counter, or user account, restricted infor-
IOT Diag Digital Input Digital Input Checks the status of the IOT sensor. 6.4.8.1
mation, etc.
Digital Output Digital Output Checks the status of the motor drive. 6.4.8.2 Clear Device Data Deletes all data in the devices (EEPROM, SRAM,
FaxMemory).
Test Print TotalChart ESS Print delivery inspection chart. HBPL data for built-in 6.4.11.2
Analog Input Monitors the A/D converted analog value of the sen- 6.4.8.3
ESS.
sor while each component is being operated.
HT Cyan ESS Print halftone pattern (C) in the PCL6. Density be 6.4.11.3
NVM Set- Edit NVM Writes the NVM values. 6.4.8.4
tings specified in increments of 10%. Up to 100%.
Clear IOT NVM Clear the NVM data of IOT. 6.4.8.5 HT Magenta ESS Print halftone pattern (M) in the PCL6. Density be 6.4.11.4
specified in increments of 10%. Up to 100%.
Print Info Config Page Config Page Prints the printer configuration informa- 6.4.9.1
HT Yellow ESS Print halftone pattern (Y) in the PCL6. Density be 6.4.11.5
tion on A4 paper.
specified in increments of 10%. Up to 100%.
Print Settings Print Settings Prints the printer setting information on 6.4.9.2
HT Black ESS Print halftone pattern (K) in the PCL6. Density be 6.4.11.6
A4 paper.
specified in increments of 10%. Up to 100%.
Installation Serial No. Displays/specifies the serial number. 6.4.10
HT CMY ESS Print halftone pattern (CMY) in the PCL6. Density be 6.4.11.7
specified in increments of 10%. Up to 80%.
Product No. Displays the product number.
HT CMYK ESS Print halftone pattern (CMYK) in the PCL6. Density 6.4.11.8
HexDump Specifies whether to set HexDump to ON or OFF.
be specified in increments of 10%. Up to 60%.
HT Red ESS Print halftone pattern (R) in the PCL6. Density be 6.4.11.9
Tone Correction Specifies whether to set IOT Tone Correction to ON
specified in increments of 10%. Up to 100%.
(IOT tone correction) or OFF.
HT Green ESS Print halftone pattern (G) in the PCL6. Density be 6.4.11.10
Pixel Counter Displays the last print pixel coverage (%) for 4 mm specified in increments of 10%. Up to 100%.
square meter in A4 paper, per Y/M/C/K color.
HT Blue ESS Print halftone pattern (B) in the PCL6. Density be 6.4.11.11
Configuration Operates the DIP switches on the NVM in ESS.
specified in increments of 10%. Up to 100%.

Version 1.1 05/2014 6.4.6 CE Mode Functions Overview

6-199
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-200 6.4.6 CE Mode Functions Overview
Table 1 Function Names and Details (Printer) Table 1 Function Names and Details (Printer)
Function Description See Function Description See
Grid2 ESS Print ESS built-in grid pattern. This is to check the 6.4.11.12 C Drum Displays the Print Volume of Drum Cartridge C was 6.4.12.1
print function. Ctrg PV used.
Gradation ESS Print ESS built-in tiled pattern C, M, Y, and K from 0 6.4.11.13 K Drum Displays the Print Volume of Drum Cartridge K was 6.4.12.1
up to 100% density. Ctrg PV used.
No Image IOT Print a blank pattern of built-in IOT. This is to check 6.4.11.14 IBT Unit Displays the Print Volume of IBT Unit was used. 6.4.12.1
the IOT print function. 2nd BTR Displays the Print Volume of 2nd BTR Unit was used. 6.4.12.1
Procon OFF ESS Built-in ESS Procon chart with Procon: printed in OFF 6.4.11.15 Unit
mode. Fusing Displays the Print Volume of Fusing Unit was used. 6.4.12.1
Procon ON ESS Built-in ESS Procon chart with Procon: printed in ON 6.4.11.16 Print
mode. Count
LPH Chart LM1 Print LPH line evaluation chart (LM1) of integrated 6.4.11.17 Fusing Displays time used with the Fusing Unit. 6.4.12.1
IOT. Time
LPH Chart IBY Print LPH line evaluation chart (IBY) of integrated 6.4.11.18 Count
IOT. Deodor- Displays the Print Volume with deodorant Filter. 6.4.12.1
ToneUp [C]5P Print Tone up Cyan chart. HBPL data for built-in ESS. 6.4.11.19 ant Filter
EEPROM Displays number of times written to EEPROM. 6.4.12.1
ToneUp [M]5P Print Tone up Magenta chart. HBPL data for built-in 6.4.11.20 Write Cnt
ESS. Tray1 F/R/ Displays the Print Volume using Tray1 Feed Roll/ 6.4.12.1
ToneUp [Y]5P Print Tone up Yellow chart. HBPL data for built-in 6.4.11.21 N Roll Retard Roll/Nudger Roll.
ESS. Tray2 F/R/ Displays the Print Volume using the Tray2 Feed Roll/ 6.4.12.1
ToneUp [K]5P Print Tone up Black chart. HBPL data for built-in ESS. 6.4.11.22 N Roll Retard Roll/Nudger Roll.
MSI FR Displays the Print Volume using the MSI Feed Roll/ 6.4.12.1
ToneDown [C]10P Print Tone down Cyan chart. HBPL data for built-in 6.4.11.23 Pad Retard Pad.
ESS. Life Print Print the Print Volume using the periodic replacement 6.4.12.2
ToneDown [M]10P Print Tone down Magenta chart. HBPL data for built- 6.4.11.24 parts.
in ESS. Procon Print current value of NVM used in Procon. 6.4.12.3
ToneDown [Y]10P Print Tone down Yellow chart. HBPL data for built-in 6.4.11.25 Print ADJ 8.1.5
ESS. RTC Set RTC Set Set the RTC (Real Time Clock). 6.4.13
ToneDown [K]10P Print Tone down Black chart. HBPL data for built-in 6.4.11.26 Exit Mode Com- Exits from the CE Mode and reboots. 6.4.4
ESS. plete Exit
Parameter Life Deve Displays the Print Volume of Deve Unit Y was used. 6.4.12.1
HSG PV Y Table 2 Function Names and Details (Fax/Scanner)
Deve Displays the Print Volume of Deve Unit M was used. 6.4.12.1 Function Description See
HSG PV
Board Diag All Test Continually performs the Fax Memory, Fax Card I/F, 6.4.14.1
M
AFE Serial I/F, IIT I/F, and ASIC tests.
Deve Displays the Print Volume of Deve Unit C was used. 6.4.12.1
Fax Mem- Fax Flash Performs write/read tests of the Fax Flash Memory. 6.4.14.2
HSG PV
C ory Test W/R Test

Deve Displays the Print Volume of Deve Unit K was used. 6.4.12.1 MRAM Performs write/read tests of the Fax MRAM. 6.4.14.2
W/R Test
HSG PV K
I/F Test Fax Card Performs the communication test between Fax Card, 6.4.14.3
Y Drum Displays the Print Volume of Drum Cartridge Y was 6.4.12.1
I/F Test AFE, and IIT.
Ctrg PV used.
FX Chip Ready to Performs the ASIC built-in IJAC/JBIG test. 6.4.14.4
M Drum Displays the Print Volume of Drum Cartridge M was 6.4.12.1
Ctrg PV used. Test start
 Table 2 Function Names and Details (Fax/Scanner) Table 2 Function Names and Details (Fax/Scanner)
Function Description See Function Description See
Relay/Sig- Relay Toggles the Relay signal at the specified frequency. 6.4.14.5 LED Cali- (Ready to Performs correction on the dispersion that is caused 6.4.16.5
nal Test Test bration Start) by the LED lamp color sensitivity. Calculates a* and
Hook Toggles the Hook signal at the specified frequency. 6.4.14.5 b* from the Y Patch scan value of Calibration Chart
Test (STP5001) and then compares them with reference
values that were pre-set in the NVM to select the
Single Continuously sends the tone at the selected fre- 6.4.14.5
Correction Coefficient No. to set in the NVM.
Tone quency.
Send Componet IIT Input Digital Input Checks the status of the IIT sensor. 6.4.16.6
DTMF Continuously sends the DTMF signal. 6.4.14.5 Check
Send IIT Output Digital Output Checks the status of the motor drive. 6.4.16.6
Dial Sends the multi-digits Dial Pulse (10/20pps) signal. 6.4.14.5 DADF DADF IIT Digital Input Checks the status of the DADF sensor. 6.4.16.7
Pulse Componet Input
Send Check
Ring Sends the ringback tone. 6.4.14.5 DADF IIT Digital Output Checks the status of the motor drive. 6.4.16.7
Back Output
Tone DADF Size (Ready to Performs troubleshooting for the IIT and displays the 6.4.16.8
Data Specifies the speed and pattern for checking data 6.4.14.5 Detect Start) presumed Faulty Parts No. on the UI.
Send forwarding(no pattern for V.34) Auto Adj.
Line Volt- Checks the status of the Line Voltage. 6.4.14.5 Parameter Chain Link Specifies the system data setting using ChainLink. 6.4.17
age BackupData All Clear Deletes the SRAM/EEPROM backup data. 6.4.18
Line Cur- Checks the status of the Line Current. 6.4.14.5 User Clear Deletes the SRAM/EEPROM backup data. 6.4.18
rent Sysytem Clear Deletes the SRAM/EEPROM backup data. 6.4.18
Information Scan Counter Displays the Scan counter value. 6.4.15.1 User&Sysytem Clear Deletes the SRAM/EEPROM backup data. 6.4.18
Scanner Scan Counter Clears the number of times were scanned using the 6.4.16.1 System Data Init Deletes the SRAM/EEPROM backup data. 6.4.18
Maintenance Counter Clear Platen. Document Clear Deletes the document data in the Fax Flash Memory. 6.4.18
Clear (FB)
DADF Clear Deletes the DADF data . 6.4.18
Counter Clears the number of times were scanned using the 6.4.16.1
Complete Complete Exits the CE mode and restarts the MPF. 6.4.4
Clear DADF.
(DADF)
Auto Shad- (Ready to (Platen) Performs auto correction for the White Ref- 6.4.16.2
ing Start) erence Board’s uneven density and degradation due
to the passage of time.
CVT Auto (Ready to This diagnostic function performs correction on the 6.4.16.3
Shading Start) density dispersion that is caused by floating DADF.
(Color) Scans in Color and calculates the Color Density
Coefficient.
CVT Auto (Ready to This diagnostic function performs correction on the 6.4.16.4
Shading Start) density dispersion that is caused by floating DADF.
(Gray) Scans in Gray and calculates the Gray Density Coef-
ficient.

Version 1.1 05/2014 6.4.6 CE Mode Functions Overview

6-201
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-202 6.4.6 CE Mode Functions Overview
6.4.7.1 All Test
All Test allows you to execute a series of FlashROM, EEPROM, DRAM, ASIC, and IOT tests in one
go.(MAC+PHY/PANEL/USB Host/RTC tests are not carried out.)

Table 1 All Test

Display After Diag

Normal Error Note

CHECK OK *** Error ***: Displays the name of the test ended in error.(Flash ROM /
EEPROM / DRAM / ASIC / IOT)

Operation Procedure
1. Enter the CE mode. (See "6.4.2 How To Enter the CE Mode".)
2. Confirm that the [Printer Diag] is selected, and then press the [OK] button.

Figure 2 j0bs64006

4. Press the [OK] button to start the test.

Figure 1 j0bs64147

3. Press the [OK] button.

Figure 3 j0bs64008

5. Press the [<--] (Back) button to return to the [Printer Diag] screen.

Figure 4 j0bs64009

Version 1.1 05/2014 6.4.7.1 All Test

6-203
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-204 6.4.7.2 Flash ROM Test
6. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode".) 6.4.7.2 Flash ROM Test
Flash ROM Test calculates the checksum per Flash ROM header area and compares the result with the
each area’s checksum prepared in ROM. The status will be regarded as "normal" when the all results
coincide with the checksums stored in ROM.

Table 1 FlashROM Test

Display After Diag

Normal Error
CHECK OK FlashROM ERROR xxxxxx
6.4.7.3 EEPROM Test 6.4.7.4 DRAM Test
EEPROM Test allows you to execute read/write/verify of the test pattern (0xff, 0xaa, 0x55, 0x00) from the DRAM Test checks whether the writing of the test data, 4-byte unit (0x00000000 -> 0x55555555 ->
head of the EEPROM for one byte in every 0 x 400. 0xaaaaaaaa -> 0xffffffff -> 0x00000000 -> ...), in the area available for the diagnosis is possible or not.
Values will be overwritten with the original value after the test.
Table 1 EEPROM Test
Area available for the diagnosis: Work areas other than the stack area and the task acquiring area.
Display After Diag

Normal Error Table 1 DRAM Test

CHECK OK EEPROM ID* ERROR (*: 1, 2) Display After Diag

Normal Error
CHECK OK DRAM slot* ERROR (*: 0, 1)

Version 1.1 05/2014 6.4.7.3 EEPROM Test

6-205
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-206 6.4.7.5 MAC+PHY Test

6.4.7.5 MAC+PHY Test 6.4.7.6 ASIC Test

MAC+PHY Test allows you to perform the loopback test for MAC (Media Access Control) and PHY ASIC Test reads the device ID of the REMORA-EX via ZoranQuatro4530 and performs the Zoran
(Physical Layer). Quatro4530 and REMORA-EX tests.

Table 1 MAC+PHY Test Table 1 ASIC Test

Display After Diag Display After Diag

Normal Error Normal Error

CHECK OK MAC+PHY ERROR CHECK OK ASIC CHECK NG
6.4.7.7 IOT Test 6.4.7.8 RTC Test
IOT Test provides the communication test between the IOT. In this communication test, the IOT status RTC Test checks the time by backing up the current time and writing the default values, and then check-
register is read for checking whether the commands are exchanged normally. ing, after a certain period of time, whether the time reaches the expected time.* Performing RTC Test will
delay the internal clock of the printer by 2 seconds.
Table 1 IOT Test
Table 1 RTC Test
Display After Diag
Display After Diag
Normal Error
Normal Error
CHECK OK IOT ERROR
CHECK OK RTC ERROR

Version 1.1 05/2014 6.4.7.7 IOT Test

6-207
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-208 6.4.7.8 RTC Test
6.4.8.1 Digital Input
Digital Input checks whether the digital input (DI) components function properly.

The display shows [0] when the digital input test is started, and the value will be increased when the DI
components are switched from OFF to ON, which is used for confirming that the component functions
normally.The test targets all DI components.

Table 1 Digital Input Parameter

Chain Link Parameter
042 200 YMC Link Sensor
071 101 #1 No Paper Sensor
071 104 #1 TRAY Paper Size Sensor Digital
072 101 #2 No Paper Sensor
072 102 #2 Level Sensor
072 103 #2 Feed Out Sensor Figure 1 j0bs64010
072 104 #2 TRAY Paper Size SensorDigital
075 100 MSI No Paper Sensor Tray1 4. Press the [OK] button.
077 101 #1 Exit Sensor
077 104 Regi Sensor
077 121 TM Regi Stop Signal input
077 300 Left Hand Interlock Switch
077 303 Front Interlock Switch
077 306 TM Left Hand Interlock Switch
091 200 Waste Toner Full Sensor

Digital Input Test Example

This section explains Digital Input Text using [077-303: Front Interlock Switch] as an example.

1. Enter the CE mode. (See "6.4.2 How To Enter the CE Mode".)

2. Confirm that the [Printer Diag] is selected, and then press the [OK] button.
3. Use the [Down arrow] button to select [IOT Diag], and press the [OK] button.
Figure 2 j0bs64011

5. Use the [Down arrow] or [Up arrow] button to select [077-303], and press the [OK] button.

Figure 3 j0bs64012

Version 1.1 05/2014 6.4.8.1 Digital Input

6-209
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-210 6.4.8.1 Digital Input
6. Press the [OK] button.

Figure 7 j0bs64016
Figure 4 j0bs64013
10. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode".)
7. Open and shut the front cover to check that the display changes as shown below.

Figure 5 j0bs64014

8. Press the [<--] (Back) button to stop the test.

Figure 6 j0bs64015

9. Press the [<--] (Back) button to return to the [Printer Diag] screen.
6.4.8.2 Digital Output Table 1 Digital Output Parameter

This function is used to check the operation of digital output (DO) component.The operation can be Chain Link Parameter
enabled for every DO component, and whether or not the component is operating normally can be 093 001 DISPENSE MOTOR-Y
judged by checking the operation from outside.
093 002 DISPENSE MOTOR-M
The Digital Output components can operate at the same time during the Digital Output test. When the 093 003 DISPENSE MOTOR-C
Interlock is opened during the Motor test, components stop their operations. 093 004 DISPENSE MOTOR-K
093 005 DEVE BIAS-DC-YMC
Table 1 Digital Output Parameter 093 006 DEVE BIAS-DC-K
Chain Link Parameter 093 007 DEVE BIAS-AC-YMC
042 001 Main Motor (126mm/s) 093 008 DEVE BIAS-AC-K
042 002 Main Motor (63mm/s) 094 001 2nd BTR (-)
042 003 Sub Motor (126mm/s) 094 002 2nd BTR (+)
042 004 Sub Motor (63mm/s) 094 003 1st BTR YMC Contact
042 005 Fusing Motor (126mm/s) 094 004 1st BTR YMC Retract
042 006 Fusing Motor (63mm/s) 094 005 1st BTR
042 007 YMC Link Solenoid
042 009 1st BTR Initialize Digital output test cases example
042 010 Fusing EXHAUST FAN The following shows an example of running tests to verify the behavior Invert Drive Motor (63-speed Fwd/
061 001 LPH forced lights (all-solid) MAX): tests to verify the operation of Sub Motor (126mm/s), 077-014 more here: 042-003.

061 002 LPH forced lights (Cin50%)

1. Enter the CE Mode. (Refer to "6.4.2 How to Enter the CE Mode")
061 003 LPH forced light (thyristor transfer)
2. Make sure [Printer Diag] is selected, and then press [OK] button.
071 001 #1 TRAY Feed Clutch
3. [Down arrow] "IOT Diag" button to select, and then press [OK] button.
072 001 #2 Feed Motor 2-phase (CW 2) Feed Direction
072 002 #2 Feed Motor 2-phase (CCW 2) Lift Up Direction
072 003 #2 Feed Motor 1-2-phase (CW 1-2) Feed Direction
072 004 #2 Feed Motor 1-2-phase (CW 1-3) Lift Up direction
075 001 MSI Feed Clutch
077 002 Regi Clutch
077 003 Duplex Clutch
077 014 Invert Drive Motor (63-speed Fwd/max)
077 015 Invert Drive Motor (126-speed Fwd/max)
077 016 Invert Drive Motor (63-speed reverse/max )
077 017 Invert Drive Motor (126-speed reverse/max )
077 031 IOT Regi Stop Signal Output
077 033 TM T/A Motor Full Speed
077 034 TM T/A Motor Half Speed
091 001 BCR Y DC Figure 1 j0bs64010
091 002 BCR M DC
091 003 BCR C DC 4. [Down arrow] "Digital Output" button to select, and then press [OK] button.
091 004 BCR K DC
092 001 R_RAD_COM_DA (ADC/MOB Sensor LED)

Version 1.1 05/2014 6.4.8.2 Digital Output

6-211
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-212 6.4.8.2 Digital Output

Figure 5 j0bs64023

8. Press the [OK] button. Check the operating sound.

Figure 2 j0bs64018

5. Press [Down arrow] button or [Up arrow] button to select the "042-003".

Figure 6 j0bs64024

9. If you want to stop the operation of Invert Drive Motor, and then press [Cancel Print] button.

Figure 3 j0bs64021

6. Press the [OK] button. Check the operating sound.

Figure 7 j0bs64023

10. If you want to stop the operation of the Sub Motor (126 mm/s), select "042-003" with [Up arrow] but-
ton, and then press [Cancel Print] button.

Figure 4 j0bs64022

NOTE: To stop the test, press the [Cancel Print] button.

7. Then at the same time if you want to check the operation of Invert Drive Motor (63-speed Fwd/
MAX), or press [Up arrow] button and the [Down arrow] button without pressing the [Cancel Print]
button to display "077-014".
 6.4.8.3 Analog Input
A feature to check the Analog Input (AI) component works correctly.

If you run the analog input test, values are displayed in hexadecimal (16).

Analog input test will qualify all of AI components.

Table 1 Analig Input Parameter

Chain Link Parameter
010 200 Heat Roll NC Sensor: Inf
010 201 Heat Roll NC Sensor: Temp
010 202 Heat Roll NC Sensor: Diff
010 203 Heat Roll STS
071 200 Tray1 Size Sensor Analog
Figure 8 j0bs64026 072 200 Tray2 Size Sensor Analog
089 200 R_RAD_LED (ADC Sensor)
11. Press the [<--] (Back) button to return to the [Printer Diag] screen. 089 202 R_RAD_LOW_LED (MOB Sensor)

Analog input test cases example

The following shows the example where a test is performed to check the 010-203: Heat Roll STS opera-
tion.

1. Enter the CE Mode. (Refer to "6.4.2 How to Enter the CE Mode")

2. Make sure [Printer Diag] is selected, and then press [OK] button.
3. [Down arrow] "IOT Diag" button to select, and then press [OK] button.
Figure 9 j0bs64016 4. [Down arrow] "Analog Input" button to select, and then press [OK] button.
5. Select "010-203" with the [Down arrow] button, and then press [OK] button.
12. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode".)

Figure 1 j0bs64148

Version 1.1 05/2014 6.4.8.3 Analog Input

6-213
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-214 6.4.8.4 NVM Setting
6. The current value of the Heat Roll STS is displayed in hexadecimal (16). 6.4.8.4 NVM Setting
NVM (EEPROM of IOT) can access control panel key operation.

Reserve the following features.

• Able to read/write the contents from/to the IOT NVM.

NOTE: NVM List of IOT can be found in 6.3.3 - 6.3.21.

Figure 2 j0bs640149 6.4.8.4.1 Read/Write from/to NVM (Edit NVM)

Read/Write the contents from/to the IOT NVM.
7. Press the [<--] (Back) button to return to the [Printer Diag] screen.
CAUTION
"Read/Write NVM (Edit NVM)" is to change the device-specific settings and the inadvertent operation or
missing settings may be an unrecoverable failure.
Operation Procedure
1. Enter the CE Mode. (Refer to "6.4.2 How to Enter the CE Mode")
2. Make sure [Printer Diag] is selected, and then press [OK] button.
3. [Down arrow] "IOT Diag" button to select, and then press [OK] button.

Figure 3 j0bs64016

8. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode".)

Figure 1 j0bs64010

4. [Down arrow] "NVM Settings" button to select, and then press [OK] button.
 Figure 2 j0bs64029 Figure 4 j0bs64031

5. Press the [OK] button. 8. Change the NVM value.

6. Type the Chain-Link No.. • [Move the Cursor (A) to the left or the right by pressing the [<] [>] buttons.
• [Move the Cursor (A) to the left or the right by pressing the [<] [>] buttons. • By pressing the [Down arrow] button [Up arrow] button, numerical value of the cursor (A) will
• By pressing the [Down arrow] button [Up arrow] button, numerical value of the cursor (A) will change.
change.

Figure 5 j0bs64032
Figure 3 j0bs64030
9. Press [OK] button to write the changed the NVM value.
7. Press [OK] button to confirm the Chain-Link number.
• If the Chain-Link No. is applicable, the current NVM value and the cursor will be displayed.
• If the Chain-Link No. is not applicable, the NG screen will be displayed. In this case, return to
the Chain-Link No. input screen using the [Cancel Print] button.

Figure 6 j0bs64033

10. Press the [Cancel Print] button to return to the previous screen.

Version 1.1 05/2014 6.4.8.4 NVM Setting

6-215
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-216 6.4.8.5 Clear IOT NVM

6.4.8.5 Clear IOT NVM

• Clear the NVM data of IOT.

Operation Procedure
1. Enter the CE Mode. (Refer to "6.4.2 How to Enter the CE Mode")
2. Make sure [Printer Diag] is selected, and then press [OK] button.
3. Select "IOT Diag" with the [Down arrow] button and press the [OK] button.

Figure 7 j0bs64034

11. Press the [<--] (Back) button to return to the [Printer Diag] screen.

Figure 1 j0bs64010

4. Select "Clear IOT NVM" with the [Down arrow] button and press the [OK] button.
Figure 8 j0bs64016

12. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode".)

Figure 2 j0bs64196

5. [Confirmation Screen] to clear [IOT NVM] will be displayed.

 Figure 3 j0bs64197

6. Press the [OK] button.

7. Once the Clear task is completed, the following screen will be displayed.

Figure 4 j0bs64198

Version 1.1 05/2014 6.4.8.5 Clear IOT NVM

6-217
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-218 6.4.8.5 Clear IOT NVM
6.4.9.1 Print Printer Configuration Data Config Page 5. Press the [OK] button to print the printer configuration data.
• When the print has completed, it returns to the "Ready" screen.
Prints the printer configuration data (below) (printable paper size is A4).

• Optional Products Status (IOT mounting tray)

• IOT ROM Revision No (IOT ROM version)

Operation Procedure
1. Enter the CE Mode. (Refer to "6.4.2 How to Enter the CE Mode")
2. Make sure [Printer Diag] is selected, and then press [OK] button.
3. Select the "Print Info" in the [Down arrow] button, and then press [OK] button.

Figure 3 j0bs64057

6. Press the [<--] (Back) button to return to the [Printer Diag] screen.

Figure 1 j0bs64055

4. Press the [OK] button. Figure 4 j0bs64058

7. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode".)

Figure 2 j0bs64056

Version 1.1 05/2014 6.4.9.1 Print Printer Configuration Data Config Page
6-219
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-220 6.4.9.2 Print Settings (Print Printer Settings Data)

6.4.9.2 Print Settings (Print Printer Settings Data) • FAX Total BackUp Count
• FAX To Server Page BackUp Count
Prints the printer settings data (Below) (printable paper size is A4).
• FAX To Email Page BackUp Count
• Serial No. (Serial No.) • FAX Color Error Count
• HexDump (HexDump ON/OFF data) • FAX B/W Error Count
• Tone Correction (IOT tone correction ON/OFF data) • FAX To Server Page Error Count
• MeterType (meter type data) • FAX To Email Page Error Count

• Print Full Color Count (Print Full Color Count) • Scan To Server Page Count
• Print Color 1 Count (toner save print count) • Scan To Email Page Count
• Print Color 2 Count (few-colored color printing count) • Scan To Server Page BackUp Count
• Print B/W Count (monochrome print count) • Scan To Email Page BackUp Count
• Print Total Count (total print count) • Scan To Server Page Error Count
• Print Full Color BackUp Count (full color print backup count) • Scan To Email Page Error Count
• Print Color 1 BackUp Count (toner save backup print count)
• Print Color 2 BackUp Count (few-colored backup color printing count) Operation Procedure
• Print B/W BackUp Count (backup monochrome print count) 1. To enter the CE mode, select the "Print Settings" in the "Print Info", and then press [OK] button.
• Print Total BackUp Count (backup total print count) (Refer to "6.4.2 How to Enter the CE Mode")
• Print Full Color Error Count (full color print error count)
• Print Color 1 Error Count (toner save print error count)
• Print Color 2 Error Count (few-colored color error print count)
• Print B/W Error Count (monochrome print error count)

• Copy Full Color Count

• Copy Color 2 Count
• Copy B/W Count
• Copy Total Count
• Copy Full Color BackUp Count
• Copy Color 2 BackUp Count
• Copy B/W BackUp Count
• Copy Total BackUp Count
• Copy Full Color Error Count
• Copy Color 2 Error Count Figure 1 j0bs64059
• Copy B/W Error Count
2. Press the [OK] button to print the printer settings data.
• When the print has completed, it returns to the "Ready" screen.
• FAX Color Count
• FAX B/W Count
• FAX Total Count
• FAX To Server Page Count
• FAX To Email Page Count
• FAX Color Count BackUp Count
• FAX B/W BackUp Count
 6.4.10 Installation Settings
Display/set/clear the following parameter.

Depending on the item, it can be displayed/set, only to display, or only to clear.

Table 1 Installatin Settings

Item Range Description
Serial No.1 9 digits Displays or changes the 9 digits serial number.
Serial No.2
Serial No.3
Product No.1
Product No.2
Product No.3
HexDump ON,OFF Specifies whether HexDump to set to ON or
Figure 2 j0bs64059 OFF.
Tone Correction (IOT ON,OFF Specifies whether IOT Tone Correction to set
3. Press the [<--] (Back) button to return to the [Printer Diag] screen. tone control) to ON or OFF.
Pixel Counter 0-100% Displays the last print pixel coverage (%) for
4mm square meter in A4 paper, per Y/M/C/K
color.
Configuration Dip Switch 0 - Operates the DIP switches on the NVM in ESS.
Dip Switch 1
Dip Switch 2
Dip Switch 3
Meter Type Type1~5 Displays the current setup information of the
Figure 3 j0bs64058 meter type
Print Counter Full Color Displays the current count of the following.- Normal Full Color
4. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode".) (Print Service) Print Count
Color1 Displays the current count of the following.- Toner Saver Print
Count
Color2 Displays the current count of the following.- Specific Color
Print Count
B/W Displays the current count of the following.- Normal Mono-
chrome Print Count- Toner Saver Monochrome Print Count-
Report Print Count
Total Displays the total count of the full color print and themono-
chrome print.
Full Color Displays the current count of the following.- Full Color Print
Backup Count Backup
Color1 Backup Displays the count backup of the following.- Toner Saver Print
Count Backup
Color2 Backup Displays the count backup of the following.- Specific Color
Print Count Backup
B/W Backup Displays the count backup of the monochrome print.

Version 1.1 05/2014 6.4.10 Installation Settings

6-221
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-222 6.4.10 Installation Settings
Table 1 Installatin Settings Table 1 Installatin Settings
Item Range Description Item Range Description
Total Backup Displays the total count backup of the full color print and the- Total Backup Display the total no. of copies of received Color FAX and
monochrome print. Black&White FAX. (Backup)
Full Color Displays the number of auto-recoveries performed when the SMB/FTP Display the no. of copies of FAX received from SMB or FTP.
Error number of the full color printis different from the count backup. Backup (Backup)
Color1 Error Displays the number of auto-recoveries performed when the Email Backup Display the no. of copies of FAX received from Email.
number of the color1 print isdifferent from the count backup. (Backup)
Color2 Error Displays the number of auto-recoveries performed when the Color Error No. of Auto Recovery performed when there was a difference
number of the color2 print isdifferent from the count backup. between Color FAX and backup Color FAX.
B/W Error Displays the number of auto-recoveries performedwhen the B/W Error No. of Auto Recovery performed when there was a difference
number of the monochromeprint is different from the count between Black&White FAX and backup Black&White FAX.
backup. SMB/FTP No. of Auto Recovery performed when there was a difference
Print Counter Full Color Displays the count of the full color (4 colors) copy count. Error between SMB/FTP FAX and backup SMB/FTP FAX.
(Copy Service) Email Error No. of Auto Recovery performed when there was a difference
Color 2 Displays the count of the single color or the dual color print. between Email FAX and backup Email FAX.
B/W Displays the monochrome copy count. Print Counter SMB/FTP Displays the count of pages transferred via Scan To SMB
Total Displays the total count of the full color, the single color, thed- (Scan Service) andScan To FTP.
ual color, and the monochrome copy. Email Displays the count of pages transferred via Scan To Email.
Full Color Displays the count backup of the full color (4 colors) copy. SMB/FTP Displays the SMB/FTP count backup.
Backup Backup
Color 2 Displays the count backup of the single color and the dual- Email Backup Displays the Email count backup.
Backup color copy. SMB/FTP Displays the number of auto-recoveries performed when the
B/W Backup Displays the count backup of the monochrome copy. Error number of SMB/FTP count isdifferent from the count backup.
Total Backup Displays the total count backup of the full color, the single- Email Error Displays the number of auto-recoveries performed when the
color, the dual color, and the monochrome copy. number of E-mail count isdifferent from the count backup.
Full Color Displays the number of auto-recoveries performed when the Copy Counter M to B - Copies data from Master NVM of ESS to the
Error number of the full color copycounter is different from the count Backup NVM.
backup. Copy Counter B to M - Copies data from Backup NVM of ESS to the
Color 2 Error Displays the number of auto-recoveries performed when the Master NVM.
number of the single/dualcolor copy is different from the count Clear All NVM - Erasing NVM (EEPROM)
backup.
Clear Job History - Erasing job history
B/W Error Displays the number of auto-recoveries performed when the • Initialized in the "Clear All NVM".
number of monochromecopy is different from the count Clear Auditron PV - Erasing aggregate counter or user account,
backup.
limited information, etc.
Print Counter Color Displays the count of the Color FAX received. • Initialized in the "Clear All NVM".
(FAX Service)
PrintVolume and Auditron share a setting area
B/W Displays the count of the monochrome FAXreceived. in an exclusive feature. Therefore, if Auditron is
Total Displays the total count of the color and the monochrome enabled, it performs clear user accounts, the
FAX. restriction information, etc. And Print Volume
SMB/FTP the no. of copies of FAX received from SMB or FTP. initializes the count counter.
Email the no. of copies of FAX received from Email.
Color Backup Display the no. of copies of Color FAX received. (Backup)
B/W Backup Display the no. of copies of received Black&White FAX.
(Backup)
 Table 1 Installatin Settings
Item Range Description
Clear Device Data - Erasing the following data
• Error Log data in EEPROM
• Jam Log data in EEPROM
• Job Log data in EEPROM
• FW Parameter data in EEPROM
• NET Parameter data in EEPROM
• Auditron in EEPROM/ Print Volume data
per user
• MRAM Adr
• FAX Log

6.4.10.1 Serial No. setting (Serial No.)

Shows the serial number setting operation procedure as an example. Figure 2 j0bs64101

1. Enter the CE Mode. (Refer to "6.4.2 How to Enter the CE Mode") 5. Change the serial number.
2. Make sure [Printer Diag] is selected, and then press [OK] button. • [Move the Cursor (A) to the left or the right by pressing the [<] [>] buttons.
3. Select "Installation" in the [Down arrow] button, and then press [OK] button. • Change the number of the cursor (A) by pressing the [Up arrow] button and [Down arrow] but-
ton.
• If you have changed the value, * mark disappears, it indicates serial number current value has
changed.

Figure 1 j0bs64100

4. Press the [OK] button.

Figure 3 j0bs64061

6. Press the [OK] button.

• The modified value is written, return to the previous screen.

Version 1.1 05/2014 6.4.10 Installation Settings

6-223
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-224 6.4.10 Installation Settings

Figure 4 j0bs64062

7. Press the [<--] (Back) button to return to the [Printer Diag] screen.

Figure 6 j0bs64100

4. Select "Copy Counter M to B" in the [Down arrow] button, and then press [OK] button.

Figure 5 j0bs64063

8. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode".)

6.4.10.2 Copy Counter M to B/Copy Counter B to M
1. Copy Counter M to B
• Copies data from Master NVM of ESS to the Backup NVM.

Figure 7 j0bs64176
2. Copy Counter B to M
• Copies data from Backup NVM of ESS to the Master NVM. 5. Press the [OK] button.

For example, here is the operating procedure of "Copy Counter M to B".

1. Enter the CE Mode. (Refer to "6.4.2 How to Enter the CE Mode")

2. Make sure [Printer Diag] is selected, and then press [OK] button.
3. Select "Installation" in the [Down arrow] button, and then press [OK] button.

Figure 8 j0bs64177

6. Copy is started by pressing the [OK] button, the following screen is displayed when you exit.
 Figure 9 j0bs641180

7. Press the [<--] (Back) button to return to the [Printer Diag] screen.

Figure 10 j0bs64063

8. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode".)

Version 1.1 05/2014 6.4.10 Installation Settings

6-225
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-226 6.4.10 Installation Settings
6.4.11.1 Printing function test operation procedure 5. Press the [OK] button, and then print a test pattern.
• When the print has completed, it returns to the "Ready" screen.
Prints the specified pattern. If Jam or No Paper error occurs during the print, the machine will wait until it
is cleared.

NOTE: Do not pull out and reinsert the Cassette. This will cause the machine to be unable to print.
Before performing the test print, check that you have sufficient paper for the task.

Describes the steps to print a Grid2 ESS pattern as an example.

1. Enter the CE Mode. (Refer to "6.4.2 How to Enter the CE Mode")

2. Make sure [Printer Diag] is selected, and then press [OK] button.
3. Select the "Test Print" in the [Down arrow] button, and then press [OK] button.

Figure 3 j0bs64066

6. Press the [<--] (Back) button to return to the [Printer Diag] screen.

Figure 1 j0bs64064

Figure 4 j0bs64067
4. Select "Grid2 ESS" in the [Down arrow] button, and then press [OK] button.

7. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode".)

Figure 2 j0bs64065

Version 1.1 05/2014 6.4.11.1 Printing function test operation procedure

6-227
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-228 6.4.11.2 TotalChart ESS

6.4.11.2 TotalChart ESS 6.4.11.3 HT Cyan ESS

Print delivery inspection chart. HBPL data for built-in ESS. Print halftone pattern (C) in the PCL6. Density be specified in increments of 10%. Up to 100%.

Paper size is A3 only. Paper size is A3 and A4L.

Figure 1 j0bs64102 Figure 1 j0bs64103

6.4.11.4 HT Magenta ESS 6.4.11.5 HT Yellow ESS
Print halftone pattern (M) in the PCL6. Density be specified in increments of 10%. Up to 100%. Print halftone pattern (Y) in the PCL6. Density be specified in increments of 10%. Up to 100%.

Paper size is A3 and A4L. Paper size is A3 and A4L.

Figure 1 j0bs64104 Figure 1 j0bs64105

Version 1.1 05/2014 6.4.11.4 HT Magenta ESS

6-229
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-230 6.4.11.6 HT Black ESS

6.4.11.6 HT Black ESS 6.4.11.7 HT CMY ESS

Print halftone pattern (K) in the PCL6. Density be specified in increments of 10%. Up to 100%. Print halftone pattern (CMY) in the PCL6. Density be specified in increments of 10%. Up to 80%.

Paper size is A3 and A4L. Paper size is A3 and A4L.

Figure 1 j0bs64106 Figure 1 j0bs64107

6.4.11.8 HT CMYK ESS 6.4.11.9 HT Red ESS
Print halftone pattern (CMYK) in the PCL6. Density be specified in increments of 10%. Up to 60%. Print halftone pattern (R) in the PCL6. Density be specified in increments of 10%. Up to 100%.

Paper size is A3 and A4L. Paper size is A3 and A4L.

Figure 1 j0bs64108 Figure 1 j0bs64109

Version 1.1 05/2014 6.4.11.8 HT CMYK ESS

6-231
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-232 6.4.11.10 HT Green ESS

6.4.11.10 HT Green ESS 6.4.11.11 HT Blue ESS

Print halftone pattern (G) in the PCL6. Density be specified in increments of 10%. Up to 100%. Print halftone pattern (B) in the PCL6. Density be specified in increments of 10%. Up to 100%.

Paper size is A3 and A4L. Paper size is A3 and A4L.

Figure 1 j0bs64110 Figure 1 j0bs64111

6.4.11.12 Grid2 ESS 6.4.11.13 Gradation ESS
Print ESS built-in grid pattern. This is to check the print function. Print ESS built-in tiled pattern C, M, Y, and K from 0 up to 100% density.

Paper size is A3 only. Paper size is A3 only.

Figure 1 j0bs64112 Figure 1 j0bs64113

Version 1.1 05/2014 6.4.11.12 Grid2 ESS

6-233
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-234 6.4.11.14 No Image IOT

6.4.11.14 No Image IOT 6.4.11.15 Procon OFF ESS

Print a blank pattern of built-in IOT. This is to check the IOT print function. Built-in ESS Procon chart with Procon: printed in OFF mode.

Paper size is A4L only.

Figure 1 j0bs64114

Figure 1 j0bs64115
6.4.11.16 Procon ON ESS 6.4.11.17 LPH Chart LM1
Built-in ESS Procon chart with Procon: printed in ON mode. Print LPH line evaluation chart (LM1) of integrated IOT.

Paper size is A4L only.

Figure 1 j0bs64117

Figure 1 j0bs64116

Version 1.1 05/2014 6.4.11.16 Procon ON ESS

6-235
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-236 6.4.11.18 LPH Chart IBY

6.4.11.18 LPH Chart IBY

Print LPH line evaluation chart (IBY) of integrated IOT.

Figure 2 j0bs64118

Figure 1 j0bs64119
6.4.11.19 ToneUp [C] 5P 6.4.11.20 ToneUp [M] 5P
Print Tone up Cyan chart. HBPL data for built-in ESS. Print Tone up Magenta chart. HBPL data for built-in ESS.

Paper size is A4L only. Paper size is A4L only.

Figure 1 j0bs64120 Figure 1 j0bs64121

Version 1.1 05/2014 6.4.11.19 ToneUp [C] 5P

6-237
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-238 6.4.11.21 ToneUp [Y] 5P

6.4.11.21 ToneUp [Y] 5P 6.4.11.22 ToneUp [K] 5P

Print Tone up Yellow chart. HBPL data for built-in ESS. Print Tone up Black chart. HBPL data for built-in ESS.

Paper size is A4L only. Paper size is A4L only.

Figure 1 j0bs64122 Figure 1 j0bs64123

6.4.11.23 ToneDown [C] 10P 6.4.11.24 ToneDown [M] 10P
Print Tone down Cyan chart. HBPL data for built-in ESS. Print Tone down Magenta chart. HBPL data for built-in ESS.

Paper size is A4L only. Paper size is A4L only.

Figure 1 j0bs64124 Figure 1 j0bs64125

Version 1.1 05/2014 6.4.11.23 ToneDown [C] 10P

6-239
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-240 6.4.11.25 ToneDown [Y] 10P

6.4.11.25 ToneDown [Y] 10P 6.4.11.26 ToneDown [K] 10P

Print Tone down Yellow chart. HBPL data for built-in ESS. Print Tone down Black chart. HBPL data for built-in ESS.

Paper size is A4L only. Paper size is A4L only.

Figure 1 j0bs64126 Figure 1 j0bs64127

6.4.11.27 Calibration Chart
Print the Confirmation Chart after Auto Tone Correction. ESS built-in HBPL Data.

Paper size is A3 and A4L.

Figure 1 j0bs64195

Version 1.1 05/2014 6.4.11.27 Calibration Chart

6-241
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-242 6.4.11.27 Calibration Chart
6.4.12.1 Initialization (Life) and the display of life counter 3. "Parameter" in the [Down arrow] button to select, and then press [OK] button.
4. "Life" in the [Down arrow] button to select, and then press [OK] button.
Conduct life and display counter value of IIOT and life counter value initialization.

Table 1 Life counter

Display/
Item Threshold initialization
Deve HSG PV Y 38000 Display/initializa-
tion
Deve HSG PV M 38000 Display/initializa-
tion
Deve HSG PV C 38000 Display/initializa-
Life tion
Deve HSG PV K 38000 Display/initializa-
tion
Y Drum Ctrg PV 68200 Display/initializa-
tion
M Drum Ctrg PV 68200 Display/initializa-
tion Figure 1 j0bs64089
C Drum Ctrg PV 68200 Display/initializa-
5. Press the [<--] (Back) button to return to the [Printer Diag] screen.
tion
K Drum Ctrg PV 68200 Display/initializa-
tion
IBT Unit 120000 Display/initializa-
tion
2nd BTR Unit 120000 Display/initializa-
tion
Fusing Print Count 100000 Display/initializa-
tion
Fusing Time Count 18000000 Display/initializa-
tion
Deodorant Filter 120000 Display/initializa-
tion
EEPROM Write Cnt - Display
Tray1 F/R/N Roll 50000 Display/initializa-
tion
Tray2 F/R/N Roll 50000 Display/initializa- Figure 2 j0bs64090
tion
6. Press the [OK] button, it displays the value.
MSI FR Pad 50000 Display/initializa-
tion

Operation Procedure
Here are example how to initialize and verify the 2nd BTR Unit life counter value.

1. Enter the CE Mode. (Refer to "6.4.2 How to Enter the CE Mode")

2. Make sure [Printer Diag] is selected, and then press [OK] button.

Version 1.1 05/2014 6.4.12.1 Initialization (Life) and the display of life counter
6-243
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-244 6.4.12.1 Initialization (Life) and the display of life counter

Figure 3 j0bs64091 Figure 6 j0bs64087

7. To initialize the life counter value of 2nd BTR Unit, press the [Cancel Print] button, back to previous 10. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode".)
screen.

Figure 4 j0bs64092

8. Select "Initialize" in the [Down arrow] button, and then press [OK] button.

Figure 5 j0bs64093

9. Press the [<--] (Back) button to return to the [Printer Diag] screen.
6.4.12.2 Life Print
Output of life count value maintained by IIOT.

NOTE:
Perform this with A4 paper loaded in Tray 1. (Reports are fit into A4 size)Although they still will be printed
even if any other paper size is loaded, parts of the images may be lost.If a paper size other than A4 is set
as a default settings for Paper Tray Settings, the reports will not be printed, while the Control Panel will
continue to display "Processing...".When that happens, turn the power OFF then ON, set the paper size
to A4 in Paper Tray Settings, and then instruct to print again in the CE Mode.

Operation Procedure
1. Enter the CE Mode. (Refer to "6.4.2 How to Enter the CE Mode")
2. Make sure [Printer Diag] is selected, and then press [OK] button.
3. "Parameter" in the [Down arrow] button to select, and then press [OK] button.
4. "Life Print" in the [Down arrow] button to select, and then press [OK] button.
Figure 2 j0bs64096

6. Press the [<--] (Back) button to return to the [Printer Diag] screen.

Figure 3 j0bs64087

7. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode".)

Figure 1 j0bs64095

5. Press the [OK] button, and then outputs "life count value".

Version 1.1 05/2014 6.4.12.2 Life Print

6-245
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-246 6.4.12.3 Procon Print

6.4.12.3 Procon Print 6. Press the [<--] (Back) button to return to the [Printer Diag] screen.

• Print current value of NVM used in Procon.

The actual sample that will be printed out is described in "ADJ 8.1.5 ProCon/RegCon Print".

Operation Procedure
1. Enter the CE Mode. (Refer to "6.4.2 How to Enter the CE Mode")
2. Make sure [Printer Diag] is selected, and then press [OK] button.
3. Select [Parameter] with the [Down arrow] button and press the [OK] button.
4. Select [Procon Print] with the [Down arrow] button and press the [OK] button. Figure 3 j0bs64087

7. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode".)

Figure 1 j0bs64199

5. Print out "Procon Print" by pressing the [OK] button.

Figure 2 j0bs64200
6.4.13 RTC Set
Setting of RTC (Real Time Clock).

Operation Procedure
1. Enter the CE Mode. (Refer to "6.4.2 How to Enter the CE Mode")
2. Make sure [Printer Diag] is selected, and then press [OK] button.
3. "RTC Set" in the [Down arrow] button to select, and then press [OK] button.

Figure 3 j0bs64099

Figure 1 j0bs64097

4. Change the NVM value.

• [Move the Cursor (A) to the left or the right by pressing the [<] [>] buttons.
• Change the number of the cursor (A) by pressing the [Up arrow] button and [Down arrow] but-
ton.

Figure 2 j0bs64098

5. Press the [OK] button.

New RTC is set and press the [OK] button and printer will restart automatically.

Version 1.1 05/2014 6.4.13 RTC Set

6-247
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-248 6.4.13 RTC Set
6.4.14.1 All Test 6.4.14.2 Fax Memory Test
All Test allows you to execute a series of Fax Memory, Fax Card I/F, AFE Serial I/F, IIT I/F, ASIC in one Fax Memory Test allows you to check the read and write ability of the Fax memory.
go.
Table 1 Fax Memory Test
Table 1 All Test Display After Diag
Display After Diag
Normal Error Note
Normal Error Note CHECK OK *** Test Check ***: Displays the name of the test ended in error.
CHECK OK *** Test Check ***: Displays the name of the test ended in error. NG (Fax Flash W/R / MRAM W/R)
NG (Fax Flash W/R / MRAM W/R / Fax Card I/F / AFE Serial I/F / IIT
I/F/ ASIC IJAC / ASIC JBIG)

Version 1.1 05/2014 6.4.14.1 All Test

6-249
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-250 6.4.14.3 I/F Test

6.4.14.3 I/F Test 6.4.14.4 Fx Chip Test

I/F Test provides the communication test between Fax Card, AFE Serial I/F, and IIT. TBD

Table 1 I/F Test Table 1 Fx Chip Test

Display After Diag Display After Diag

Normal Error Note Normal Error Note

CHECK OK *** Test Check ***: Displays the name of the test ended in error. CHECK OK *** Test Check ***: Displays the name of the test ended in error.
NG (Fax Card I/F) NG
6.4.14.5 Relay/Signal Test Table 1 Relay/Signal Test
Item Range Description
Table 1 Relay/Signal Test
Data Send V.34 33600bps - Sends the data specified with speed and
Item Range Description V.34 31200bps pattern (no pattern for V.34).
Relay Test Relay Toggle Test 50 - 9999 Toggles the Relay signal within the speci- V.34 28800bps
fied frequency. V.34 26400bps
Relay Set Test ON, OFF Outputs the Relay signal at a specified V.34 24000bps
level.
V.34 21600bps
Hook Test Hook Toggle Test 0150 - 9999 Toggles the Hook signal within the speci-
V.34 19200bps
fied frequency.
Hook Set Test ON, OFF Outputs the Hook signal at a specified
level. V.34 16800bps

Single Tone 0Hz - Continuously sends the selected frequency V.34 14400bps
Send 400Hz tone. V.34 12000bps
462Hz V.34 9600bps
V.34 7200bps
V.34 4800bps
1100Hz
V.34 2400bps
1300Hz
V.29 9600bps 5 patterns Sends the data specified with speed and
1500Hz
V.29 7200bps pattern.

V.27ter 4800bps 5 patterns Sends the data specified with speed and
2100Hz
V.27ter 2400bps pattern.
500Hz
V.21 300bps 5 patterns Sends the data specified with speed and
600Hz
pattern.
900Hz
V.17 14400bps 5 patterns Sends the data specified with speed and
1000Hz pattern.
V.17 12000bps
DTMF Send DTMF Continuous 0 - 9, A - D, *, # Continuously sends the DTMF signal.
V.17 9600bps
DTMF Individually 16 digits Sends the multiple digits DTMF signal.
(each digit 0 - 9, A V.17 7200bps
- D, *, #) Line Voltage - Checks the Line Voltage status.
Dial Pulse DP10 Individually 10 digits Sends the multiple digits dial pulse (10pps) Line Current - Checks the Line Voltage status.
Send (each digit: 0 - 9) signal.
DP20 Individually 10 digits Sends the multiple digits dial pulse (20pps) Procedure
(each digit: 0 - 9) signal. The procedure below explains [DTMF Send] > [DTMF Continuous] as an example.
Ring Back Tone - Sends the ringback tone.
1. Enter the CE mode. (See "6.4.2 How To Enter the CE Mode")
2. Use the [Down arrow] button to select [Fax/Scanner Diag], and press the [OK] button.

Version 1.1 05/2014 6.4.14.5 Relay/Signal Test

6-251
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-252 6.4.14.5 Relay/Signal Test

Figure 1 j0bs64170 Figure 3 j0bs64129

3. Use the [Down arrow] button to select [Fax/Scanner Diag], and press the [OK] button. 6. Use the [Down arrow] button to select [DTMF Send], and press the [OK] button.
4. Press the [OK] button.

Figure 4 j0bs64130
Figure 2 j0bs64128
7. Press the [OK] button.
5. Use the [Down arrow] button to select [Relay/Signal Test], and press the [OK] button.

Figure 5 j0bs64131
8. Use the [Up arrow] or [Down arrow] button to change the value and then press the [OK] button to
start sending the signal.

Figure 6 j0bs64132

9. To stop sending the signal, press the [<--] (Back) button.

Figure 7 j0bs64133

10. Press the [<--] (Back) button to return to the [Fax Scanner Diag] screen.

Figure 8 j0bs64134

11. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode")

Version 1.1 05/2014 6.4.14.5 Relay/Signal Test

6-253
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-254 6.4.14.5 Relay/Signal Test
6.4.15.1 Scan Counter
Displays the scan counter value.

Procedure
1. Enter the CE mode. (See "6.4.2 How To Enter the CE Mode")
2. Use the [Down arrow] button to select [Fax/Scanner Diag], and press the [OK] button.

Figure 3 j0bs64136

5. Press the [<--] (Back) button to return to the [Fax/ Scanner Diag] screen.

Figure 4 j0bs64137

6. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode")

Figure 1 j0bs64170

3. Use the [Down arrow] button to select [Information], and press the [OK] button.

Figure 2 j0bs64135

4. Press the [OK] button.

Version 1.1 05/2014 6.4.15.1 Scan Counter

6-255
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-256 6.4.15.1 Scan Counter
6.4.16.1 Scan Counter Clear 4. Press the [OK] button.

Table 1 IIT I/O Check

Item Sensor Status
Counter Clear (FB) Clears the value of the FB scan counter.
Counter Clear (DADF) Clears the value of the DADF scan counter.

Procedure
1. Enter the CE mode. (See "6.4.2 How To Enter the CE Mode") Figure 3 j0bs64172
2. Use the [Down arrow] button to select [Fax/Scanner Diag], and press the [OK] button.
5. Press the [OK] button.

Figure 4 j0bs64173

6. Clears the value of the FB scan counter.

Figure 1 j0bs64170

3. Use the [Down arrow] button to select [Scanner Maintenance], and press the [OK] button.

Figure 5 j0bs64174

7. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode")

Figure 2 j0bs641171

Version 1.1 05/2014 6.4.16.1 Scan Counter Clear

6-257
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-258 6.4.16.2 Auto Shading

6.4.16.2 Auto Shading

Purpose
Performs auto correction for the White Reference Board’s uneven density and degradation due to the
passage of time.

NOTE: Auto Shading is to be performed during CE Image Quality adjustment after replacing the Top
Cover or CIS Unit.

Procedure Figure 2 j0bs64151

1. Enter the CE Diag Mode (FAX/Scanner Diag -> Parameter) and input 715-106 in the Chain-Link to
set the Paper Type used during Auto Shading. 4. Load a stack of 10 A3 size blank sheets on the Platen and press <OK> to start the Auto Shading.
• Performs shading to stabilize the IIT state.
Table 1 • Obtains the shading data.
Default Setting • Performs sampling of white paper data to calculate and set the White Reference Correction
Chain-Link No. Value Paper Type Value Range Coefficient. (Written into NVMs [715-092 to 715-095].)
715-106 0 Use NVM Individual Paper Coeffi- 0 0~8 • Performs shading to reflect the result after the White Reference Adjustment.
IIT Paper Code cient 5. When the Auto Shading has completed, the following measured values will be displayed .
1 J paper
2 P paper
3 C2 paper
4 Green100 paper
5 Digital Color Xpression
6 Color Tech+
7 Xerox4200 paper
8 Xerox Business
Figure 3 j0bs64152

2. Use the [Down arrow] button to select [Auto Shading], and press the [OK] button. 6. Press the [<--] (Back) button to return to the [Fax/ Scanner Diag] screen.

Figure 1 j0bs64150 Figure 4 j0bs64175

3. Press the [OK] button. 7. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode")
6.4.16.3 CVT Auto Shading (Color)
Purpose
This diagnostic function performs correction on the density dispersion that is caused by floating DADF.

• DADF Density Correction Mode (Color): Scans in Color and calculates the Color Density Coeffi-
cient.

NOTE: Auto Shading is to be performed during CE Image Quality adjustment after replacing the
DADF, Top Cover, or CIS Unit.
Figure 2 j0bs64154
Procedure
4. Load 1 A3 size blank sheet on the DADF and press <OK> to start the Auto Shading.
1. Enter the CE Diag Mode (FAX/Scanner Diag -> Parameter) and input 715-106 in the Chain-Link to
• Performs shading to stabilize the IIT state.
set the Paper Type used during Auto Shading.
• Obtains the shading data.
Table 1 • Performs sampling of white paper data to calculate and set the White Reference Correction
Coefficient. (Written into NVMs [715-097 to 715-099].)
Default Setting
Chain-Link No. Value Paper Type Value Range • Performs shading to reflect the result after the White Reference Adjustment.

715-106 0 Use NVM Individual Paper Coeffi- 0 0~8

IIT Paper Code cient
1 J paper
2 P paper
3 C2 paper
4 Green100 paper
5 Digital Color Xpression
6 Color Tech+ Figure 3 j0bs64155
7 Xerox4200 paper
8 Xerox Business 5. [When the Auto Shading has completed, the following measured values will be displayed .

2. Use the [Down arrow] button to select [CVT Auto Shading (Color)], and press the [OK] button.

Figure 4 j0bs64156

6. Press the [<--] (Back) button to return to the [Fax/ Scanner Diag] screen.
Figure 1 j0bs64153

3. Press the [OK] button.

Version 1.1 05/2014 6.4.16.3 CVT Auto Shading (Color)

6-259
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-260 6.4.16.4 CVT Auto Shading (Gray)

6.4.16.4 CVT Auto Shading (Gray)

Purpose
This diagnostic function performs correction on the density dispersion that is caused by floating DADF.

• DADF Density Correction Mode (BW): Scans in BW and calculates the BW Density Coefficient.

NOTE: Auto Shading is to be performed during CE Image Quality adjustment after replacing the
DADF, Top Cover, or CIS Unit.

Procedure Figure 2 j0bs64158

1. Enter the CE Diag Mode and input 715-106 in the Chain-Link to set the Paper Type used during 4. Load 1 A3 size blank sheet on the DADF and press <Start> to start the Auto Shading.
Auto Shading.
• Performs shading to stabilize the IIT state.
Table 1 • Obtains the shading data.
• Performs sampling of white paper data to calculate and set the White Reference Correction
Default Setting
Coefficient. (Written into NVM [715-100].)
Chain-Link No. Value Paper Type Value Range
• Performs shading to reflect the result after the White Reference Adjustment.
715-106 0 Use NVM Individual Paper Coeffi- 0 0~8
IIT Paper Code cient
1 J paper
2 P paper
3 C2 paper
4 Green100 paper
5 Digital Color Xpression
6 Color Tech+
7 Xerox4200 paper Figure 3 j0bs64159
8 Xerox Business
5. When the Auto Shading has completed, the following measured values will be displayed .
2. Use the [Down arrow] button to select [CVT Auto Shading (Gray)], and press the [OK] button.

Figure 4 j0bs64160
Figure 1 j0bs64157
6. Press the [<--] (Back) button to return to the [Fax/ Scanner Diag] screen.
3. Press the [OK] button.
6.4.16.5 LED Caliblation 4. When the LED Calibration has completed, the following measured values will be displayed .
Use <Up> and <Down> on the control panel to scroll through the display and select [OK] to display-
Purpose the result. Select [Back] to return to the previous screen.
1. Performs correction on the dispersion that is caused by the LED lamp color sensitivity. Calculates a*
and b* from the Y Patch scan value of Calibration Chart (STP5001) and then compares them with
reference values that were pre-set in the NVM to select the Correction Coefficient No. to set in the
NVM.
2. At the same time, IIT Calibration is also performed to obtain the Reflective Ratio of each color by
scanning each YMCK Patch of Calibration Chart (STP5001) and store them in the NVM.

NOTE: LED Calibration is to be performed during CE Image Quality adjustment after replacing the LED
Lamp PWB or CIS Unit.

Procedure Figure 4 j0bs64164

1. Use the [Down arrow] button to select [LED Calibration], and press the [OK] button.
(1) IIT Reflectivity
• R, G, B/ Y, M, C, K: numeric display (IIT Reflectivity_NVMs [715-282 to 715-293])
• Result: displays [OK] or [NG].

(2) Scan Image (for ENL/FMC), Result: displays [OK] or [NG]

• LED correction coefficient (NVM715-281)
• Calculated Value Before b* Correction (NVM715-269) b*: Reference value

Figure 1 j0bs64161 (3) Scan Image (for FLC), Result: displays [OK] or [NG]
• b*correction coefficient (NVM715-280)
2. Press the [OK] button.
• Calculated Value After b* Correction (NVM715-263) b*: Reference value

5. Press the [<--] (Back) button to return to the [Fax/ Scanner Diag] screen.

Figure 2 j0bs64162

3. Place the chart (STP5001) on the Platen and press <OK> to start the LED Calibration.

Figure 3 j0bs64163

Version 1.1 05/2014 6.4.16.5 LED Caliblation

6-261
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-262 6.4.16.6 Component Check (IIT)

6.4.16.6 Component Check (IIT) Table 1 Component Check Input

Checks the IIT I/O components operation. Chain Link Parameter

062 240 ADF Exist
6.4.16.6.1 IIT Input 062 251 APS Sensor1
Procedure 062 253 APS Sensor2
1. Use the [Down arrow] button to select [Component Check], and press the [OK] button. 062 272 ScanStart
062 300 Platen I/L Switch
062 301 Angle Sensor

6.4.16.6.2 IIT Output

Procedure
1. Use the [Down arrow] button to select [Component Check], and press the [OK] button.

Figure 1 j0bs64181

2. Press the [OK] button to select [IT Input].

Figure 4 j0bs64181

2. Use the [Down arrow] button to select [IIT Output], and press the [OK] button.

Figure 2 j0bs64182

3. Press the [OK] button.

Figure 5 j0bs64184

3. Press the [OK] button.

Figure 3 j0bs64183

Table 1 Component Check Input

Chain Link Parameter
062 201 Sheet Abort
062 212 IIT Regi Sensor
 6.4.16.7 DADF Component Check
Checks the DADF I/O components operation.

6.4.16.7.1 DADF IIT Input

Procedure
1. Use the [Down arrow] button to select [DADF Component Check], and press the [OK] button.

Figure 6 j0bs64190

Table 2 Component Check Output

Chain Link Parameter
062 002 IIT Exposure Lamp
062 005 IIT Scan Motor (Scan direction)
062 006 IIT Scan Motor (Return direction) Figure 1 j0bs64185
062 091 Exchange To ADF
2. Press the [OK] button to select [DADF IIT Input].

Figure 2 j0bs64188

3. Press the [OK] button.

Figure 3 j0bs64187

Table 1 DADF Component Check Input

Chain Link Parameter
005 102 Document Sensor
005 110 Regi Sensor

Version 1.1 05/2014 6.4.16.7 DADF Component Check

6-263
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-264 6.4.16.7 DADF Component Check
Table 1 DADF Component Check Input
Chain Link Parameter
005 206 CVT Pre-Reg. Sensor
005 211 CVT Invert Sensor
005 212 CVT Feeder Cover Interlock Switch
005 213 DADF Open Sensor
005 215 CVT #1 Tray APS Sensor
005 216 CVT #2 Tray APS Sensor Figure 6 j0bs64189
005 217 CVT #3 Tray APS Sensor
005 221 CVT Tray Size SNR No.1 4. Press the [OK] button.
005 222 CVT Tray Size SNR No.2
005 224 ScanStart
005 228 APS

6.4.16.7.2 DADF IIT Output

Procedure
1. Use the [Down arrow] button to select [DADF Component Check], and press the [OK] button.

Figure 7 j0bs64191

Table 2 DADF Component Check Output

Chain Link Parameter
005 004 CVT Feed Motor
005 005 CVT Feed Motor
005 008 CVT Feed Motor
Figure 4 j0bs64185 005 010 CVT Feed Motor
005 046 CVT Platen Motor
2. Use the [Down arrow] button to select [DADF IIT Input], and press the [OK] button. 005 047 CVT Platen Motor
005 048 CVT Exit. Motor
005 049 CVT Exit. Motor
005 062 CVT Feed Clutch
005 072 CVT Nip Release Sol
005 083 Doc Ready
005 088 Image Area ON
005 098 TA Clutch

Figure 5 j0bs64188

3. Press the [OK] button.

6.4.16.8 DADF Size Detect Auto Adj.
Purpose
To automatically adjust the original size during DADF scan to the desired original size.

Procedure
1. Use the [Down arrow] button to select [DADF Size Detect Auto Adj.], and press the [OK] button.

Figure 4 j0bs64168

7. Press the [<--] (Back) button to return to the [Fax/ Scanner Diag] screen.

Figure 1 j0bs64165

2. Press the [OK] button.

NOTE: Pressing <OK> for machines that do not have a DADF will cause an Error to be displayed.

Figure 2 j0bs64166

3. Load 3 sheets of A4 LEF size originals.

4. Load the originals on the DADF and press <OK>.
5. The DADF Size Detect Auto Adjust will be performed. When this is in progress, the message [Pro-
cessing] is displayed on the UI.

Figure 3 j0bs64167

6. When the DADF Size Detect Auto Adjust has completed, the following measured values will be dis-
played . (Adjust OK or Adjust NG)

Version 1.1 05/2014 6.4.16.8 DADF Size Detect Auto Adj.

6-265
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-266 6.4.17 Parameter (System Data Setting)

6.4.17 Parameter (System Data Setting)

You can specify the Fax and Scan system data settings.

• 6.3.22 System Data List

• 6.3.3 DADF NVM List
• 6.3.4 IIT NVM List

Procedure
1. Enter the CE mode. (See "6.4.2 How To Enter the CE Mode")
2. Use the [Down arrow] button to select [Fax/Scanner Diag], and press the [OK] button.
3. Use the [Down arrow] button to select [Parameter], and press the [OK] button.

Figure 2 j0bs64139

5. Change the setting value, and press the [OK] button.

• * (asterisk) will appear when the value is set.

Figure 1 j0bs64138 Figure 3 j0bs64140

4. Change the Chain Link number, and press the [OK] button. 6. Press the [<--] (Back) button to return to the [Fax Scanner Diag] screen.
• Use the [<-] and [->] buttons to move the cursor to right and left.
• Use the [Up arrow] and [Down arrow] buttons to increase or decrease the value where the cur-
sor is placed.
• Press the [OK] button, and the Chain Link number changed will appear.

Figure 4 j0bs64141

7. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode")

6.4.18 Backup Data Table 2 Initialization Data

Backup data in SRAM and EEPROM can be cleared. User and System
Data All User System Sys Document Data DADF
Table 1 Calling Table * * * * *
Normal Error Broadcast CRB Document * * *
Number
All Clear
Management Data in Broad- * * *
User Clear
Refer to Table 2 cast 1 Job
System Clear
Broadcast 1 Job Result * * *
User and System Clear
Substitute Queue * * * * *
System Data Init
Receiving Document Informa- * * * * *
Document Clear tion
DADFClear Document Number * * * * *
Document Management Table * * * * *
Table 2 Initialization Data
Directory Management Table * * * * *
User and System
FAT Chain Table * * * * *
Data All User System Sys Document Data DADF
FAT Chain Save Range * * * * *
EEPROM System Data * * * * *
FAT Delete Status Table * * * * *
SRAM System Data * * * * *
Table of Number of Sector *
System Error History * * * Erase Times
SW Bug History * * * Garbage Correction Information * * * * *
Diag History * * * Sector for Garbage Correction * * * * *
Local ID G3 * * * Garbage Correction Preparation * * * * *
Local Name * * * Sector
TX Header Logo * * * Fax Communication Speed *
Forward Dial Number * * * Counter
System Counter * ADF Scan Counter *
Speed Dial Block (Speed Dial * * * Platen Scan Counter *
Control Block) Total Signal Number * * *
Dial Group Block (Group Dial * * * Signal Data Buffer Pointer * * *
Registration Block) Signal Information Table * * *
SCAN to FTP/SMB Address * * * Signal Data Buffer * * *
Book
Number of SCJL Job Log Reg- * * *
SCAN to Email Address Book * * * istrations
Email Group Block (E-mail * * * SCJL Job Log Data * * *
Group Registration Block) Backup Check Data 2 *
Email Subject * * * Backup Data Status *
Email Text * * * Backup RAM Bottom *
Block for Communication Result * * *
Registration
Procedure
Communication Result Regis- * * *
The following procedure explains how to clear the data using [User Clear] as an example.
tration for Protocol Monitor
Report
1. Enter the CE mode. (See "6.4.2 How To Enter the CE Mode")
Backup Check Data1 *

Version 1.1 05/2014 6.4.18 Backup Data

6-267
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-268 6.4.18 Backup Data
2. Use the [Down arrow] button to select [Fax/Scanner Diag], and press the [OK] button.
3. Use the [Down arrow] button to select [BackUp Data], and press the [OK] button.

Figure 3 j0bs64144

Figure 1 j0bs64142 6. Press the [<--] (Back) button to return to the [BackUp Data] screen.

4. Use the [Down arrow] button to select [User Clear], and press the [OK] button.

Figure 4 j0bs64145

7. Press the [<--] (Back) button to return to the [Fax Scanner Diag] screen.

Figure 2 j0bs64143

5. Press the [OK] button. Figure 5 j0bs64146

8. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode")

6.5.1 Diagnosis Function Overview 6.5.2 Switch to Panel Diag Mode
Provide the diagnosis function as shown in the following chart as the Panel Device diagnosis function Press multiple keys ([0][5][8]) simultaneously from the Panel Device when the Power is ON to switch to
Panel Diag Mode.
Table 1
No. Diagnosis Function Name Function Overview
1 Memory Test Perform the test for access (read/write) to the memory, Flash-
Memory (ROM)/SDRAM (RAM)/EEPROM (NVM) that will be
installed in the Panel Device.
2 Hardware Key Test Check the hardware key. Display the character string that
supports all of the hardware keys on the LCD screen and
change the color of the letter of the key that is pressed.
3 Adjust Touch Screen Test Set the correction value of the Touch Panel.
Perform calibration for touch coordination of the Touch Panel.
4 Touch Screen Test Check the Touch Panel. Press the 9 buttons on the Touch
Panel in order and complete the Touch Panel test by pressing
all the buttons.
5 LED Test Perform the LED test. Turn ON the LED by pressing the but-
ton displayed on the LCD screen. The LED will turn OFF by
pressing the Stop button. It is possible to test blinks as well.
6 Buzzer Test Perform the buzzer test. Set the volume and press the Start
button to sound the buzzer. The buzzer will stop by pressing
the Stop button.
7 Brightness Test Check the Panel brightness.
Change the Panel brightness to 10 stages and check to see if
the brightness changes.
8 Display Test Check the PLCD screen display.
Display in the order of Red Screen, Green Screen, Blue
Screen, White Screen, Black Screen, Perimeter Frame
Screen, Color Bar Screen, Grayscale Screen, and check to
see if there is no Data Line Bit missing.
9 Adjust Sense of Touch Adjust the touch sensitivity.
Set the sensitivity with the numeric keypad and use that
adjusted value for the Panel touch operation to detect the
touch.

Version 1.1 05/2014 6.5.1 Diagnosis Function Overview

6-269
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-270 6.5.3 Panel Diag Menu

6.5.3 Panel Diag Menu 6.5.4 Memory Test

6.5.3.1 Function Explanation 6.5.4.1 Function Explanation
• Displays the Panel Diag Function Menu. • Perform the test for access (read/write) to the memory, Flash-Memory (ROM)/SDRAM (RAM)/
EEPROM (NVM) that will be installed in the Panel Device.
• The screen can be switched by pressing the button on the LCD but can also be switched by specify- • If Flash-Memory test is selected, calculate the sum value of the Flash-Memory program area and
ing the diagnosis item number using the Hardware Key. compare it with the sum value stored in the Flash-Memory.
• If SDRAM test is selected, write 0xAAAAAAAA, 0x55555555, 0xFFFFFFFF, 0x00000000 in the
unused area of SDRAM and check to see if the written value can be read correctly.
6.5.3.2 Screen Layout
• If EEPROM (NVM) test is selected, write 0xAA, 0x55, 0xFF, 0x00 in the unused area of EEPROM
(A) shows the button is being pressed.
and check to see if the written value can be read correctly.

6.5.4.2 Screen Layout

(A) Status Display Area

Figure 1 j0bs65001

Figure 1 j0bs65003

6.5.4.3 Operating Explanation

• Select the type of memory to test from the check box. (Multiple selection shall be enabled and all
items should be selected by default.)
• Perform the test for the selected memory by pressing the [Start] button.
• The [Start] button is invalid if no check boxes are selected.
• Display the progress of the memory test in Status Display Area (A).

Table 1
Status Display Meaning Remarks
Figure 2 j0bs65002
Checking ... Checking memory... If this state continues for a long period of
time, there is a possibility that it froze during
reading/writing.The state can be restored by
turning the power OFF/ON since it cannot be
operated from the Panel.
Check OK Memory check result: Normal
Memory ERROR Memory check result: Abnormal
• The [Start] button and [<-] button/[Delete] key do not do anything if any memory check is in 6.5.5 Hardware Key Test
progress.
• Return to the Panel Diag Menu using the [<-] button/[Delete] key.
6.5.5.1 Function Explanation
• Perform a test to see if the Hardware Key will be detected by pressing it.

• Enable the detecting diagnosis of the Hardware Key when it is simultaneous pressed as well.

• The Hardware Key character string displayed on the LCD will change its color while the Hardware
Key is being pressed. By releasing the Hardware Key, the character string color will remain changed
indicating that it has been pressed.

• The Hardware Key used in tests are as follows:

Table 1 Hardware Key List

Hardware Key Display Name
Services Services
Job Status Job Status
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
0 0
* *
# #
C C
Redial/Pause Redial
Pause
Clear All Clear All
Stop Stop
Start Start
Energy Saver Energy
Saver

Version 1.1 05/2014 6.5.5 Hardware Key Test

6-271
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-272 6.5.6 Adjust Touch Screen Test
6.5.5.2 Screen Layout 6.5.6 Adjust Touch Screen Test
6.5.6.1 Function Explanation
• Set the correction value of the Touch Panel.

• Use a 3-point calibration method for the 4.3inch Touch Panel.

6.5.6.2 Screen Layout

1. 1. Switch to the Touch Correction Screen if the Menu is selected.

Figure 1 j0bs65004

6.5.5.3 Operating Explanation

• Display the character string that corresponds to the Hardware Key and change the corresponding
character string color to Dark Green while the Hardware Key is being pressed.
The pressed Hardware Key will change the corresponding character string letters to Orange.

• Support simultaneous pressing of the Hardware Key as well, and if simultaneous pressing is Figure 1 j0bs65005
detected, change the corresponding multiple character string letter to Red (Even if it has already
been pressed, change to Red when multiple pressing occurs). 2. The color is changed if the "+" mark is touched.

• Return to the Panel Diag Menu using the [<-] button.

• Display the character string of the energy saving key in Gray.

Figure 2 j0bs65006

6.5.6.3 Operating Explanation

• Return to the Panel Diag Menu when the [Delete] key of the Hardware Key is pressed.

• Proceed to the Touch Screen Test screen after touching the last mark (First & middle marks need to
be touched before).

• Display the touched coordinate with a red "+" mark in the Panel Diag and CE Diag.
(In most cases, do not display if it was started up from the Maintenance Menu.)
6.5.7 Touch Screen Test 6.5.8 LED Test
6.5.7.1 Function Explanation 6.5.8.1 Function Explanation
• Display the Touch mark on the LCD and compare to see if the place matches with the place the user • Perform light test for the LED installed in the Panel Device to see if it turns ON/OFF.
has touched. If it matches after comparing, change the Touch mark color to indicate that it has been
touched correctly. Do not change the color of the Touch mark if it does not match.
• Energy saving LED is connected to the port in the ESS board. Due to this, the LED light control uses
USB I/F and the Panel Device instructs the energy saving LED control to the ESS.
6.5.7.2 Screen Layout
1. Switch to the touch test screen when the Menu is selected. (It will automatically switch to this screen 6.5.8.2 Screen Layout
once the touch correction is completed)

Figure 1 j0bs65007 Figure 1 j0bs65009

2. The color can be changed by touching. 6.5.8.3 Operating Explanation

• Each button forms 1 group button (referred to as LED button group hereinafter) and operates alter-
natively. The default display is All Off.

• If there is anything selected from the LED button group, turn ON the corresponding LED. If it is not
selected, turn OFF the corresponding LED.

• If the [ALL LED] button is selected, select the LED button group and turn all LEDs ON. If there is a
LED button that is not selected, turn OFF the [ALL LED] button.

• Return to the Panel Diag Menu using the [<-]button/[Delete]key.

Figure 2 j0bs65008
• Disable the display of the Energy Saving Button.
6.5.7.3 Operating Explanation
• Refer to Operation Flow of the Screen Layout for basic operation specifications.
• Guide the Touch in a Z shape (Parallel from the left (upper left) to right (lower right).
• This test should be able to be terminated if any abnormality is detected on the Touch. The method
of termination shall be the "Delete" key of the Hardware Key and not the Touch Panel.
• Return to the Panel Diag Menu after the lower right mark is touched (Return to the Menu when the
lower right mark is touched even if everything not been touched).
• Display the corrected coordination with a blue "+" mark.
(In most cases, do not display if it was started up from the Maintenance Menu.)

Version 1.1 05/2014 6.5.7 Touch Screen Test

6-273
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-274 6.5.9 Buzzer Test

6.5.9 Buzzer Test 6.5.10 Brightness Test

6.5.9.1 Function Explanation 6.5.10.1 Function Explanation
• Perform buzzer sounding and buzzer stop test. • Perform Panel Device brightness test.

• The buzzer volume can be switched between 3 volumes: Low, Mid, High • The value changed with the Panel diagnosis function will not be reflected on the system data since
the purpose is to diagnose. The Panel brightness adjustment is open to KO and it can be set from
• The buzzer will sound by sounding instructions and will stop sounding by stopping the buzzer. Do the corresponding screen.
not stop the buzzer sound automatically.
6.5.10.2 Screen Layout
• Enable the buzzer volume to be specified and buzzer to be turned on/off using the Hardware Key.
NOTE: The default value is 1.

6.5.9.2 Screen Layout

NOTE: The default value is 1.

Figure 1 j0bs65011

6.5.10.3 Operating Explanation

• Adjust the brightness with Spinbox. The value range is from 1 (dark) to 10 (bright).
Figure 1 j0bs65010

6.5.9.3 Operating Explanation • The brightness can be changed with the numeric keypad as well. If a number that exceeds the max-
imum value is entered, the numeric keypad input will be invalid. The numeric keypad [0] of first row
• Adjust the volume with Spinbox.1: Volume Low, 2: Volume Mid, 3:Volume High
is invalid as well.
• Volume adjustment can be done using the numeric keypad as well. If a number that exceeds the
maximum value is entered, the numeric keypad input will be invalid. Numeric keypad [0] is invalid as
well. • Return to the Panel Diag Menu using the [<-] button.
• Sound the buzzer by pressing the [Start] button.
• The buzzer will stop by pressing the [Stop] button. • By pressing the [Delete] key, the brightness will return to default.
• The [Stop] button should always be enabled. In other words, buzzer stop instructions should always
be enabled even if the buzzer is not sounding. • Disable the "+"/"-" button display when the counter value reaches its Max/Min.
• The [Start] key/[Stop] key of the Hardware Key shall also be able to control buzzer sounding instead
of the [Start]button/[Stop]button.
• Return to the Panel Diag Menu using the [<-] button.
• By pressing the [Delete] key, the volume will return to default.
• Disable the "+"/"-" button display when the counter value reaches its Max/Min.
6.5.11 Display Test
6.5.11.1 Function Explanation
• Display in the order of Red Screen, Green Screen, Blue Screen, White Screen, Black Screen,
Perimeter Frame Screen, Color Bar Screen, Grayscale Screen on the LCD and check to see if there
is no Data Line Bit missing.
6.5.11.2 Screen Layout
• Red Screen

Figure 3 j0bs65014

• White Screen

Figure 1 j0bs65012

• Green Screen

Figure 4 j0bs65015

• Black Screen

Figure 2 j0bs65013

• Blue Screen

Figure 5 j0bs65016

• Perimeter Frame Screen

Version 1.1 05/2014 6.5.11 Display Test

6-275
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-276 6.5.12 Adjust Sense of Touch

6.5.12 Adjust Sense of Touch

6.5.12.1 Function Explanation
• Acquire the PD4 (Y coordinate) voltage during the touch operation of the Panel and set the adjust-
ment value for determining whether the acquired value is standard value or above.

• Maintain the adjusted value in NVM of the Touch Panel Device.

• When touch operating the Panel, use the adjusted value that was set with this device and detect the
touch.

Figure 6 j0bs65017
6.5.12.2 Screen Layout
• Color Bar Screen NOTE: The default value is 2801.

Figure 7 j0bs65018

Figure 1 j0bs65020
• Grayscale Screen

6.5.12.3 Operating Explanation

• Sensitivity adjustment value can be changed only with the numeric keypad.

• The value range is from 0 (low) to 915 (high). If a number that exceeds the maximum value is
entered, the numeric keypad input will be invalid.

• Set the value with the [OK] button/[Start] key and return to the Panel Diag Menu. The [x] button/
[Delete] key will not set the value and will return to the Panel Diag Menu.

• Return the sensitivity to its default value by pressing the [All Clear] key.
Figure 8 j0bs65019

6.5.11.3 Operating Explanation

• Move to the next screen with the [Start] key. Go back to the previous screen with the [Stop] key.
(The display shall be all Red when entering from the Menu and the it shall return to the Panel Diag
Menu when the [Start] key is pressed at the Grayscale screen.)

• Return to the Panel Diag Menu using the [Delete] key.

6.6.1 Activity Report (User Mode) 6.6.2 Activity Report (CE Mode)
**Send** **Send**

Table 1 Table 1
Document Recipien Start Time No. of Communicatio Communicatio Document Recipien Start Time No. of Mod Communicatio Communicatio
No. No. t Time used pages Mode n Contents n Result No. No. t Time used pages e n Contents n Result
1 xx xxx xx: xx x min xx x xx xxx xxxx 1 xx xxx xx: xx x min xx x xx xxx xxxx
2 xx xxx xx: xx sec xx xx xxx xxxx 2 xx xxx xx: xx sec xx xx xxx xxxx
x min xx x min xx
sec sec

**Receive** **Receive**

Table 2 Table 2
Document Start Time No. of Communicatio Communicatio Document Recipien Start Time No. of Communicatio Communicatio
No. No. Recipient Time used pages Mode n Contents n Result No. No. t Time used pages Mode n Contents n Result
1 xx xxx xx: xx x min xx x xx xxx xxxx 1 xx xxx xx: xx x min xx x xx xxx xxxx
2 xx xxx xx: xx sec xx xx xxx xxxx 2 xx xxx xx: xx sec xx xx xxx xxxx
x min xx x min xx
sec sec

In the following order, 1 Remote Station is recorded.

Table 3

During Registration Dialing Outgoing Call Recipient Name > Telephone Number > Remote ID >
Communication Mode

Table 4
Communication Result Contents
Ready Print or Store to Mailbox completes without any errors.
Line Busy The specified number of redials was exceeded
Auto Resend Call for resend without exceeding the limit on resending
Disconnect The operator forced a specific call to stop on the panel
Recipient Verification Required Error during communication caused by the recipient or the network
xxx-xxx Error Code has occurred (Chain-Link Code)

Version 1.1 05/2014 6.6.1 Activity Report (User Mode)

6-277
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-278 6.6.3 Protocol Monitor

6.6.3 Protocol Monitor Recorded G3 Signal Name and Implication

Format Overview Table 2

The implication of the symbol which appears in the arrow Signal Name Description
CED Called Station Identification Signal
In G3 mode, the command for displaying added information in the arrow is displayed.
CNG Outgoing Calling Tone
< [Added Information] - CI Function Display Signal
Example) ANSam Varied Answering Tone
< @- , < #- CM Calling Menu Signal
Implication of added information JM Common Menu Signal
CJ CM Terminal Signal
Table 1
NSF Non-standard Features
Added Information
CSI Called Station Identification
Code When sending When receiving
DIS Digital Identification Signal
- Normal signal Normal signal
NSC Non-Standard Function Command
@ Undefined Undefined
CIG Calling Terminal Identification
X Undefined CRC Error Detection
DTC Digital Send Command
# Undefined Undefined
SEP Selection Polling
! Undefined Carrier disconnected for 1sec in image information
PSA Polling Sub-Address
= Undefined Intermittent discontinuity in image information
PWD Password
/ Undefined Undefined
NSS Non-Standard Function Settings
* Undefined Undefined
TSI Transmission Terminal Identification
+ Undefined Undefined
DCS Digital Command Signal
: Undefined Undefined
SUB Sub Address
A Undefined Undefined
SID Sending Station Identification
B Undefined Undefined
TCF Training Check
C Undefined Undefined
CFR Reception Preparation Verification
D Undefined Undefined
FTT Training Failed
E Undefined Undefined
CTC Correction Continuation (ECM)
F Undefined Undefined
CTR Correction Continuation Response (ECM) [Response for CTC]
NSSX Non-Standard Function Settings
TCFX Training Check
PIX Image Information
TRN Training
CPIX Image Information (ECM)
EOM Note
EOP Message Ends
EOS Procedure Ends
MCF Message Confirmation
MPS Multi-Page Signal
PIN Procedure Disruption Reject
PIP Procedure Disruption Affirmation
 Table 2
Signal Name Description
PRI-EOM Procedure Disruption EOM
PRI-MPS Procedure Disruption MPS
PRI-EOP Procedure Disruption EOP
RTN Retraining Reject
RTP Retraining Affirmation
EOR. EOM Resend Ends / Message Ends (ECM)
EOR. EOP Resend Ends / Procedure Ends (ECM)
EOR. MPS Resend Ends / Multi-Page Signal (ECM)
EOR.NULL Resend Ends / Partial Page Boundary (ECM)
EOR.PEOM Resend Ends / Procedure Disruption EOM (ECM)
EOR.PEOP Resend Ends / Procedure Disruption EOP (ECM)
EOR.PMPS Resend Ends / Procedure Disruption MPS (ECM)
ERR Resend Completion Response (ECM) [Response for EOR]
PPR Partial Page Request (ECM)
PPS. EOM Partial Page Signal / Message Ends (ECM)
PPS. EOP Partial Page Signal / Procedure Ends (ECM)
PPS. MPS Partial Page Signal / Multi-Page Signal (ECM)
PPS. NULL Partial Page Signal / Partial Page Boundary (ECM)
PPS. PEOM Partial Page Signal / Procedure Disruption EOM (ECM)
PPS. PEOP Partial Page Signal / Procedure Disruption EOP (ECM)
PPS. PMPS Partial Page Signal / Procedure Disruption MPS (ECM)
RNR Reception Not Allowed (ECM)
RR Reception Allowed (ECM)
EOMX Message Ends (Xerox)
EOR.EOMX Resend Ends / Message Ends (Xerox, ECM)
EOR.MPSX Resend Ends / Multi-Page Signal (Xerox, ECM)
EOR.PEOX Resend Ends / Procedure Disruption EOM (Xerox, ECM)
EOR.PMPX Resend Ends / Procedure Disruption MPS (Xerox, ECM)
MPSX Multi-Page Signal (Xerox)
PPS. EOMX Partial Page Signal / Message Ends (Xerox, ECM)
PPS. MPSX Partial Page Signal / Multi-Page Signal (Xerox, ECM)
PPS. PEOX Partial Page Signal / Procedure Disruption EOM (Xerox, ECM)
PPS. PMPX Partial Page Signal / Procedure Disruption MPS (Xerox, ECM)
PRI-MPSX Procedure Disruption MPS (Xerox)
PRI-EOMX Procedure Disruption EOM (Xerox)
CRP Command Resend
DCN Disconnection Command

Version 1.1 05/2014 6.6.3 Protocol Monitor

6-279
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-280 6.6.4.1 Protocol Trace

6.6.4.1 Protocol Trace

T.30 PROTOCOL TRACE DIS/DCS (Year 2000 version)

According to the recommendation in year 2000 ITU-T (previously, CCITT), FIF Bit assignment of DIS,
DCS, DTC signals was modified and reached the maximum of 12 bytes (96 bits). According to the new
recommendation (F Code/Color Fax/Internet Fax unctions, etc), the assignment of individual Bits is dis-
played as follows. (DIS FIF=20EEFAC4801F is used as an example)

Table 1
Hexadecimal
number Binary
0 0000
1 0001
2 0010
3 0011
4 0100
5 0101
6 0110
7 0111
8 1000
9 1001
A 1010
B 1011
C 1100
D 1101 Figure 1 j0mf2701
E 1110
F 1111

Link is provided inside each Bit in the following illustration described in the Electronic Manual. Press the
button of the item to link to its contents description.

NOTE: *The stamp sets the reserved Bit to '0'.

NOTE: JBIG: Joint Bi-level Image Coding Experts Group... Binary Image Encoding Method, Reversible
(can be restored to original data after compression/expansion), for BW Fax Use
JPEG: Joint Photographic Coding Experts Group... Multi-Value Natural Image Encoding Method,
Non-Reversible (cannot be restored to original data once compressed or expanded), for Color Fax
Use
6.6.4.2 FCF/FIF Description 6.6.4.3 Bit 7 Description
DIS: 80 64: ECM Frame size (DCS is invalid)

DCS: 82/83 0 -> 256 Octet

1 -> 64 Octet
DTC: 81
Refer to ’EFS’ of Bit 28 (6.6.4.15)

Frame (Signal) List Table sent by Sending Station during F-Code Communication... Frame Name is
printed in protocol

Table 1
Frame Name FCF Name/Contents
PWD C1 Password. Enter password in FIF.
Sending permitted only when Bit 50 of DIS is 1.
SEP A1 Selective Polling. Enter the Sub Address in FIF.
Displays the specific document number when used with PSA concurrently.
Sending permitted only when Bit 47 of DIS is 1.
PSA 61 Polling Sub Address. Enter the Sub Address in FIF.
Sending permitted only when Bit 35 of DIS is 1.
SUB C2/C3 Sub Address. Enter the Sub Address of the called party in FIF.
Sending permitted only when Bit 49 of DIS is 1.
SID A2/A3 Sending Station ID. Enter the identification number (Local Station ID) of the
Sending Station in FIF.
Sending permitted only when Bit 50 of DIS is 1.

The frame (signal) that can be used is decided according to the capability of the Receiving Station
declared by DIS.

Every frame in the table has to be sent prior to DCS.

When sending, Bit 49 and 50 of DCS and Bit 35, 47, and 50 of DTC must be set to ’1’.

Enter 20 characters for Password in ASCII code (0-9, #, *) and 20 characters for Sub Address in ASCII
code (0-9).

Version 1.1 05/2014 6.6.4.2 FCF/FIF Description

6-281
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-282 6.6.4.4 Bit 6 Description

6.6.4.4 Bit 6 Description 6.6.4.5 Bit 16 Description

V8: V.8 Capability (28.8Kbps MODEM Function, SG3) D2: Two Dimension Coding (Encoding Capability)

0 -> Off 0 -> MH only

1 -> On (DCS is invalid) 1 -> MH and MR
6.6.4.6 Bit 15 Description 6.6.4.7 Bit 14~11 Description
VR: Vertical Resolution (Slow Scan Linear Density) DSR: Data Signaling Rate (Electrical Transmission Speed), [ ] corresponds to the past machine only

0 -> 3.85l/mm 1 -> 3.85l/mm and 7.7l/mm Table 1

Also see Bit 44 and 45 14 13 12 11 DIS/DTC DCS

• Bit 44: Refer to 6.6.4.22 0 0 0 0 V27ter Fall Back 2400 Bit/s: V27ter

• Bit 45: Refer to 6.6.4.21 0 0 1 0 V27ter 4800 Bit/s: V27ter

0 0 0 1 V29 9600 Bit/s: V29
0 0 1 1 V27ter and V29 7200 Bit/s: V29
0 1 0 0 Not Used Invalid [14400 Bit/s: V33]
0 1 1 0 Preset Invalid [12000 Bit/s: V33]
0 1 0 1 Not Used Preset
0 1 1 1 Invalid [V27ter, V29, Preset
V33]
1 0 0 0 Not Used 14400 Bit/s: V17
1 0 1 0 Preset 12000 Bit/s: V17
1 0 0 1 Not Used 9600 Bit/s: V17
1 0 1 1 V27ter, V29, [V33] V17 7200 Bit/s: V17
1 1 0 0 Not Used Preset
1 1 1 0 Preset Preset
1 1 0 1 Not Used Preset
1 1 1 1 Preset Preset

Version 1.1 05/2014 6.6.4.6 Bit 15 Description

6-283
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-284 6.6.4.8 Bit 10 Description

6.6.4.8 Bit 10 Description 6.6.4.9 Bit 9 Description

RX: Reception Capability TX: Preparation of Send Originals or Documents for Public Polling

0 -> Off 0 -> Send Document Not Available (DCS is fixed at 0)

1 -> On 1 -> Ready
6.6.4.10 Bit 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112 6.6.4.11 Bit 21~23 Description
Description MSL: Minimum Scan Line (Minimum Scan Line Electrical Transmission Time Capability)
EXT: Extend Field (Extended Field)
Table 1
0 -> Indicates no data in the subsequent byte DIS (Minimum Scan Line Time
1 -> Indicates data in the subsequent byte 23 22 21 Capability) DCS (Minimum Scan Line Time)
0 0 0 20ms (3.85l/mm): T7.7=T3.85 20ms
1 0 0 40ms (3.85l/mm): T7.7=T3.85 40ms
0 1 0 10ms (3.85l/mm): T7.7=T3.85 10ms
0 0 1 5ms (3.85l/mm): T7.7=T3.85 5ms
1 1 0 10ms (3.85l/mm): T7.7=1/2 T3.85 Not Used
0 1 1 20ms (3.85l/mm): T7.7=1/2 T3.85 Not Used
1 0 1 40ms (3.85l/mm): T7.7=1/2 T3.85 Not Used
1 1 1 0ms (3.85l/mm): T7.7=T3.85 0ms

• Displays the minimum scanning time per scan line for 7.7l/mm (High Quality) and 3.85l/mm (Stan-
dard) Slow Scan Linear Density of T7.7 and T3.85 respectively.
• T7.7=1/2 T3.85 means that the scanning time in High Quality mode is reduced to half of the scan-
ning time in Standard Mode.
• MSL is being ignored at ECM Communication.

Version 1.1 05/2014 6.6.4.10 Bit 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112 Description
6-285
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-286 6.6.4.12 Bit 19, 20 Description

6.6.4.12 Bit 19, 20 Description 6.6.4.13 Bit 17, 18 Description

UL: Unlimited (Unlimited length=Roll Paper) WA3: Width of A3 (A3 Width)

LB4: Length of B4 (B4 length) WB4: Width of B4 (B4 Width)

Table 1 Table 1
Maximum Record Length (Slow Scan WA3 WB4 Maximum Record Width (Fast Scan Width)
UL LB4 Length) 0 0 A4 width (215mm)
0 0 A4 length (297mm) 0 1 Below B4 width (255mm) (A4 included)
0 1 B4 length (364mm) and A4 length (297mm) 1 0 Below A3 width (303mm) (B4 and A4 included)
1 0 Unlimited length (Roll Paper) 1 1 Invalid (Selection not allowed)
1 1 Invalid (Selection not allowed)
6.6.4.14 Bit 31 Description 6.6.4.15 Bit 28 Description
T6: T.6 Coding (MMR Coding) EFS: ECM Frame size (ECM Frame Octet Count)

0 -> MMR Coding Disabled 0 -> 256 Octet (DIS is fixed at 0)

1 -> MMR Coding Enabled 1 -> 64 Octet

NOTE: Among Bit 7 data, when DIS Bit 7 is '1', DCS Bit 28 will be declared as '1', and ECM frame will
become 64 Octet Mode. (For Description of Bit 7, refer to 6.6.4.3)

Version 1.1 05/2014 6.6.4.14 Bit 31 Description

6-287
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-288 6.6.4.16 Bit 27 Description

6.6.4.16 Bit 27 Description 6.6.4.17 Bit 26 Description

ECM: Error Correction Mode UCM: Uncompressed Mode

0 -> ECM Disabled 0 -> Off

1 -> ECM Enabled 1 -> On
6.6.4.18 Bit 25 Description 6.6.4.19 Bit 1, 3, 33~38, 47, 49~51, 53~55, 57, 59, 60, 62, 65~71,
HSM: 2400BPS Handshaking 73~75, 81~84, 87, 92~95, 97~99, 101, 102 Description
0 -> Off Table 1
1 -> On
Divisio Contents [For DIS/DTC -> 1: With capability, 0: No capability; For
HSM is pertinent to past models. New recommended machine is set to ’0’. n Bit No. Item Name DCS -> 1: Send the relevant signal, 0: Do not send]
I Bit 1 SIM Internet Fax Simple Mode Capability
I Bit 3 REAL Internet Fax Real time Internet Fax
- Bit 33 IGN Invalid Field Signal Capability
F Bit 34 SPC F Code Multiple Selection Polling Capability. DCS is set to 0. (Refer to
the table in 6.6.4.2)
F Bit 35 SUB F-Code Polling Sub Address CapabilityDCS is set to 0.
(Refer to the table in 6.6.4.2)
C Bit 36 T43 Color Fax T.43 Encoding Capability. Select T.43 or JPEG (Bit 68) as the
Encoding Method
C Bit 37 INT Color Fax Plain Interleave Capability. Valid only when Bit 36 is 1.
F Bit 34 SPC F Code Multiple Selection Polling Capability. DCS is set to 0.
(Refer to the table in 6.6.4.2)
F Bit 47 SEP F Code Selection Polling Capability. DCS is set to 0.
(Refer to the table in 6.6.4.2)
F Bit 49 SAC F Code Sub Address Capability
(Refer to the table in 6.6.4.2)
F Bit 50 PWC F Code Password Capability
(Refer to the table in 6.6.4.2)
- Bit - File Transfer Capability
51~51
- Bit - Mixed Mode / Bit 66 and 67
59~65
C Bit 68 JPG Color Fax JPEG Encoding Capability. Bit 27 (ECM) is set to 1 if this is
set to 1.
C Bit 69 FC Color Fax Full Color Capability. Valid only when Bit 68 is 1.
C Bit 70 HUF Huffman Code Table Command. Valid only when Bit 68 is 1. DIS is set
to 0. (Change the compression rate based on the Code Table)
C Bit 71 12 12bit/pixel Capability. For 0, image data is 8bit/pixel. Valid only when Bit
68 is 1.
C Bit 73 SAM Color Fax Sub Sampling Disabled (L*, a*, b* is 1: 1: 1). 0 is 4: 1: 1. Valid
only when Bit 68 is 1.
C Bit 74 ILL Color Fax Non-Standard Irradiated Light. 0 uses CIE Standard Irradi-
ated Light D50. Valid only when Bit 68 is 1.
C Bit 75 GAR Color Fax Non-Standard Gamut Range. 0 uses the standard range.
Valid only when Bit 68 is 1.
- Bit 81 HKM HKM key
- Bit 82 RSA RSA key
- Bit 83 OVR Overwrite Mode

Version 1.1 05/2014 6.6.4.18 Bit 25 Description

6-289
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-290 6.6.4.20 Bit 46 Description
Table 1 6.6.4.20 Bit 46 Description
Divisio Contents [For DIS/DTC -> 1: With capability, 0: No capability; For HMSL: Super High Quality Mode MSL Time (Valid for DIS only)
n Bit No. Item Name DCS -> 1: Send the relevant signal, 0: Do not send]
- Bit 84 HFX HFX40 Code 0 -> T15.4=T7.71 -> T15.4=1/2 T7.7
- Bit 87 HFI HFX40-I Hashing Capability • If HMSL is ’1’ and T7.7 is 10, 20, 40ms, the linear scan time for Super High Quality Mode is reduced
- Bit T44 Mixed Raster Contents Mode to 1/2 of High Quality Mode.
92~95 • If DIS T7.7 is 0ms or 5ms (Bit 23, 22 and 21 are 111, 001, and 110 respectively), Bit 46 must be set
C Bit 97 C34 Color Fax 300x300, or 400x400 pixels/25.4mm Capability to ’0’.

C Bit 98 C100 Color Fax 100x100 pixels/25.4mm Capability

- Bit 99 BFT Binary File Transfer Capability
I Bit 101 IP Internet Fax Selective Polling. DCS is set to 0.
I Bit 102 IA Internet Fax Routing Address. When used in DCS, other F-Code Bit 49
and 50 may be set to 1.

Division Description

Table 2
Division Contents
C: Color Fax Scan a color document with a Scanner of 200 dpi or more and encode (com-
press) the image data with 8x8 bits pixel elements (or more) (CIELAB data
Expressed by L*, a*, b*) to JPEG or T43 for transmission purposes. ECM is
required for G3. a*: +Red<->Green- (’+’ value for Red and ’-’ value for Green),
b*: +Yellow<->Blue-(same) CIELAB Data Color Component Sampling L*,a*,b* -
> 4: 1: 1 shows that a*, b* components are reduced to 1/4 of L* component
(Brightness element data).1: 1: 1 indicates that Sub Sampling is not performed
(not thinned out).
Moreover, if only L* component is being used while a*,b* value is set to 0, 0, it
will become BW Fax.
F: F-Code (Refer to Table 2 for F-Code) F-Code Communication also supports password-
protected Mail Box communication with machine of other brands. Registers the
password or sub-address to the receiving station and notifies the setup avail-
ability in DIS.
Add password, sub address, and others in the function frame at the Sending
Station and send. The Receiving station will receive only if the settings match. If
the Sending Station does not have the capability, the frame will not be sent.
T: File Transfer -
M: Mixed Mode -
6.6.4.21 Bit 45 Description 6.6.4.22 Bit 44 Description
MBR: Meteric Based Resolution Preferred IBR: Inch Based Resolution Preferred

(mm series resolution capability ... DIS only) (Inch Series Resolution Capability) DIS

DIS 0 -> Off

1 -> On
0 -> Off DCS
1 -> On (DCS is optional)
When Bit 15 is ’1’* 0 -> mm series
1 -> Inch series
Table 1
Resolution (relationship between Bit 15 and Bit 43, 44, and
MBR IBR 45)
0 0 Invalid (Selection not allowed)
0 1 200x200 pel/inch
1 0 8x7.7 l/mm
1 1 8x7.7l/mm and 200x200pel/inch

When Bit 43 is ’1’*

Table 2
Resolution (relationship between Bit 15 and Bit 43, 44, and
MBR IBR 45)
0 0 Invalid (Selection not allowed)
0 1 400x400 pel/inch
1 0 16x15.4 l/mm
1 1 16x15.4 l/mm and 400x400 pel/inch

* When Bit 41~43 is 0, the contents of Bit 15 becomes valid.

Version 1.1 05/2014 6.6.4.21 Bit 45 Description

6-291
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-292 6.6.4.23 Bit 43 Description

6.6.4.23 Bit 43 Description 6.6.4.24 Bit 42 Description

Super High Quality Capability 300x300 pel/inch (TC7033 Super High Quality-equivalent)

0 -> Off 0 -> Off

1 -> On 1 -> On
DIS 16x15.4 l/mm and/or 400x400 pel/inch

DCS 16x15.4 l/mm or 400x400 pel/inch

6.6.4.25 Bit 41 Description 6.6.4.26 Bit 79 Description
8x15.4 l/mm (7017/7045 High Quality 2-equivalent) 85O: T.85 JBIG Option Capabilities

0 -> Off 0-> OFF

1 -> On 1->On (Bit 78 and 27 are set to ’1’)

Version 1.1 05/2014 6.6.4.25 Bit 41 Description

6-293
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-294 6.6.4.27 Bit 78 Description

6.6.4.27 Bit 78 Description 6.6.4.28 Bit 77 Description

85B: T.85 JBIG Basic Capacity LEG: North America Legal Size (215.9x355.6mm)

0: OFF 0: OFF
1: On (Bit 27: ECM is set to ’1’) 1: On (when DIS/DTC is 1, the reception capability of A4 size is required)
6.6.4.29 Bit 76 Description 6.6.4.30 Bit 105~109 Description
LET: North America Letter Size (215.9x279.4mm)
Table 1
0: OFF Bit NO Contents Description Value
1: On (when DIS/DTC is 1, the reception capability of A4 size is required)
105 600 600x600 pixels/25.4mm 1: ON
0: OFF
106 1200 1200x1200 pixels/25.4mm 1: ON
0: OFF
107 3x6 300x600 pixels/25.4mm 1: ON
0: OFF
108 4x8 400x800 pixels/25.4mm 1: ON
0: OFF
109 6x12 600x1200 pixels/25.4mm 1: ON
0: OFF

Version 1.1 05/2014 6.6.4.29 Bit 76 Description

6-295
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-296 6.6.4.30 Bit 105~109 Description
6.6.5.1 Super G3 Fax
In 1996 ITU-T, [Super G3 Fax] is recommended.[Super G3 Fax] supports 28.8Kbps Fax communication,
has modem capability of V.8 and V.34, and its protocol consists of V.8 and V.34 parts....33.6Kbps is also
available as an option. With [Super G3 Fax], 28.8Kbps communication with the other companies Fax is
made possible, and so is the communication with the conventional 14.4K/9600 bps G3 Fax.

• When communicating via [Super G3] mode, [SG3] is recorded in the Report Mode column.
• [Super G3] Image Information Transmission is performed in ’ECM (Error Correction Mode)’.
• V.34 is the standard for 28.8K (option: 33.6K) to 2400 bps modem; V.8 is the standard for deciding
on the procedure to select the optimal mode for the preceding line condition to V.34.FIF configura-
tion (Table 1) of CM and JM signals used in V.8 and the details of every bit are as follows.
[Super G3 Fax] can communicate with conventional Fax in standards other than V.34 (28.8K), such as
V.17 (14.4K) and V.29/V.27ter(9600/4800), and has V.8 feature which supports the procedure for select-
ing the optimal speed for verifying the line condition.

• TCF signal (in Phase B) is not used in V.34.

• The command (such as NSF/DIS) speed for the conventional procedure is 1200bps in V.34.

Figure 1 j0mf2716

NOTE1 Signal Names and Contents

CNG (Calling signal):

The signal for showing the communication function from the outgoing terminal is sent continu-
ously until ANSam arrives.
CNG is not recorded in Trace.
During Manual Send, ’CI’ signal is sent as V.8 Calling signal
When Phase B is entered without ANSam being detected and DIS V.8 capability is available
(bit 6=1)’, send CI from the outgoing side and return to the V.8 procedure in Super G3 mode.
ANSam (Response signal):

Version 1.1 05/2014 6.6.5.1 Super G3 Fax

6-297
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-298 6.6.5.2 V.8 CM/JM Signal
Stops after the signal with amplitude of 2100Hz modulated by15Hz is being sent continuously 6.6.5.2 V.8 CM/JM Signal
for 4sec, or once CM is detected. Fax without Super G3 capability is detected as CED.
FIF configuration (Table 1) of CM and JM signals used in V.8 and the details of every bit are as follows.
CM (Calling Menu Signal):
300bps signal (*) that declares the modem mode that can be used at outgoing terminal. V.8 is the standard that decides the procedure for modem with multiple capabilities to auto select the opti-
JM (Joined Menu Signal): mal mode corresponding to the line condition.
Stops when 300bps signal, which declares the modem mode that can be used on the outgoing/
incoming terminal, and CJ are detected (For CM or JM FIF, refer to No. 2 ’V.8 CM/JM Signal’)
CJ (CM terminator):
Continuation of 300bps and 3 octet ’0’ by signals which indicate the end of CM and verify JM.
NOTE2 Signal Names and Contents

V.34ph2 (Phase 2): Probing

Measures the line attribute using Probing signal.
V.34ph3 (Phase 3): Equalizer Training
Set up the modem equalizer by the TRN signal
V.34ph4 (Phase 4): Final Training
Determines the signal speed
(V.34 Phase 1 is V.8 procedure)
This section (Phase 2 to 4) is automatically performed by the modem at the outgoing and incoming
terminals. Send Level, Equalizer, and Modulator Speed are determined. The value determined here
takes precedence over the NSF/DIS contents.

Figure 1 j0mf2717
 6.6.5.3 V.8 Operation / Auto Send
[Super G3 Fax] can communicate with conventional Fax in standards other than V.34 (28.8K), such as
V.17 (14.4K) and V.29/V.27ter (9600/4800). Communication procedure is selected following the flow
below based on the capability of the remote station/detected signal.

Below is the flow when either the incoming or outgoing terminal or both has [Super G3 Fax] capability
and Auto Send takes place at the outgoing terminal.

Figure 2 j0mf2718

Figure 1 j0mf2719

Version 1.1 05/2014 6.6.5.3 V.8 Operation / Auto Send

6-299
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-300 6.6.5.4 V.8 Operation/Manual Send

6.6.5.4 V.8 Operation/Manual Send 6.6.5.5 Troubleshooting of Super G3 Fax

Below is the flow for Manual Send at the Sending Terminal. As Super G3 Fax belongs to analog communication, its basic troubleshooting is the same as G3 Fax. As
differences exist due to the fast communication speed and the different communication procedure, trou-
bleshooting unique in Super G3 mode will be described.

Super G3 Fax can communicate up to a maximum speed of 28800bit/s with V.34 modem. With option, it
can communicate up to 33600bit/s.

As the conventional communication speed is 14400bit/s (V.17), to achieve high speed communication by
V.34, you have to perform data transmission of 2 times or above the conventional speed at one time.
Therefore, communication is affected by the quality of telephone line now more than before. Even with
telephone lines that can communicate without errors in 14400/9600bit/s, communication errors may
occur in Super G3.

Normal analog public lines have satisfactory frequency characteristics in 300-3400Hz zone. Even if
Super G3 communication sends or receives using the same remote party or telephone line, the commu-
nication speed may differ. This is because the speed is decided based on the line quality measured at the
sending side using the Probing feature performed in V.34 procedure, and when sending or receiving is
done in Super G3, the result from Probing is changed. That is, Super G3 mode cannot always communi-
cate at the highest speed (33600bit/s). Domestic Super G3 communication can achieve a speed of
21600bit/s and above in most cases.

The conventional Fax at 14400bit/s or lower uses half-duplex communication which sends the signal
alternately whereas Super G3 Fax is performed using full-duplex communication which has a different
communication procedure. In full-duplex communication, Fax from both sides will send signal concur-
rently and each side can monitor the signal of the remote party while sending its own signal. Therefore,
until now, the communication status can be verified by monitoring the sound of the line but Super G3
communication is unable to judge by the monitor sound. That is, when communication error occurs, pro-
tocol monitor analysis is required now more than ever, and the frequency in which the Traces between
the incoming and outgoing stations are compared increases.

Super G3 Troubleshooting Precautions

ECM: ECM is required in Super G3 communication. Set the ECM feature to OFF and communicate via
V.17/V.29(1400/9600bit/s) instead of V.34, even if Super G3 mode is available.

Communication Procedure: Super G3 communication procedure consists of V.8 and V.34 procedures.
Figure 1 j0mf2720
V.8 procedure will determine the verification of Super G3 mode and the communication speed. Once the
V.8 procedure has completed, it will proceed to V.34 procedure and transmit image information via V.34
procedure. V.34 procedure has the same command names as G3 procedure (such as V.17/V.29) and
most of their protocol traces are the same, but as it uses full-duplex communication, its command trans-
mission speed is 1200bit/s.
V.8 procedure uses CNG (or CI: for Manual Send) sent by the outgoing terminal and ANSam tonal Line Frequency Characteristics (F attribute): Attributes for telephone line frequency is known as [Fre-
(sound) signal sent by the incoming terminal. If the line is noisy or the signal level is low, these tonal sig- quency Characteristic], and ideally, the characteristic is uniform between 300 to 3400Hz used by the tele-
nals cannot be recognized properly by the remote station and resulting in errors. Procure the protocol of phone. However, for public lines, it is normal for the lower frequency and the higher frequency to
the remote station and determine whether the signals (recorded in one’s Trace) sent from here are deteriorate (attenuation distortion, delayed signals), and the deterioration extent increases as the ground
recorded. distance (accurately speaking, the line distance for the analog section) becomes longer. As compared to
normal telephone calls and G3 Fax communication, the Frequency Characteristics for Super G3 commu-
V.34 procedure is being carried out in order of Phase 2, 3, and 4, and [V34ph2], [V34ph3], and [V34ph4] nication is greatly affected. Even for lines that can carry out 14000/9600bps communication normally,
is recorded in the Protocol Trace. If Phase 4 has completed successfully, proceed to Phase B, C, D, and error may occur in Super G3 communication. As audio compression is being performed in most of the
E. Please refer to the procedure in the past for the troubleshooting here. Corporate Leased Lines (digital lines), the Frequency Characteristic is worst than the NTT public line,
resulting in a high level of error occurrences in Super G3 communication.
When the line is noisy or the signal is low, the procedure is not carried out properly. When Phase 2, 3,
and 4 is being carried out repeatedly, [V34ph2], [V34ph3], [V34ph4], [V34ph2], [V34ph3], [V34ph4]... will
be recorded in the Protocol Trace repeatedly. If error occurred in the procedure of Phase 2, [V34ph2] is
recorded but not [V34ph3] and [V34ph4].

It can determine whether there is a problem with the analog characteristics of the telephone line in both
examples described here and determine if the Send level is not appropriate.

Send level: As Super G3 Fax is analog communication, the signal level is very important. Especially
when the noise level ratio (known as S/N ratio) becomes an issue. To detect the signal correctly, the S/N
ratio must be above a certain level. Verify the Protocol Trace, if the remote station indicates ’Same signal
is sent repeatedly’, ’Do not advance to the next procedure’, or the likes, it will mean that the remote sta-
tion cannot recognize the signal from here.

In such cases, you can try changing the Send Level. If the Send Level is increased with the same noise
level, S/N ratio becomes larger. When changing the Send Level, slowly increase or decrease the level (1-
2dB) and test the communication several times with the changed value to find the best value.

However, if digital lines (ISDN/Corporate Digital Leased Line) or digital devices (such as digital PBX/TA)
are used, analog signal with too high a level will cause the wave pattern to become erratic and the com-
munication cannot take place normally (when performing analog-digital modulation, the wave pattern of
high level signals is erratic). In line environment like this, lower the Send Level for satisfactory communi-
cation.

Speed: The highest speed is 33600bit/s for Super G3 mode; however, most of the PSTN communica-
tions in Japan are performed in 31200~21600 bit/s. If the line condition is very bad, the speed may be
reduced to 9600bit/s. Communication speed is determined by the result of Phase 2 procedure for V.34
Send Terminal. Therefore, even if the same line is used, a change in the Send Terminal will affect the
communication speed.

Version 1.1 05/2014 6.6.5.5 Troubleshooting of Super G3 Fax

6-301
DC SC2020 General
DC SC2020 05/2014
General
Version 1.1 6-302 6.6.5.5 Troubleshooting of Super G3 Fax