Scribd
Upload
691 views3 pages

Soil Mechanics

This document provides information on a 5 credit course on Geotechnical Engineering - I. The course aims to enhance knowledge of the subject. It is divided into 5 units covering topics like soil composition, properties, permeability, strength, and slope stability. Students will learn testing methods for moisture content, density, permeability, shear strength, and more through 9 listed experiments. The course references 6 books on subjects like soil mechanics and foundation engineering.

Uploaded by

Pradum Kumar Gupta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
691 views3 pages

Soil Mechanics

This document provides information on a 5 credit course on Geotechnical Engineering - I. The course aims to enhance knowledge of the subject. It is divided into 5 units covering topics like soil composition, properties, permeability, strength, and slope stability. Students will learn testing methods for moisture content, density, permeability, shear strength, and more through 9 listed experiments. The course references 6 books on subjects like soil mechanics and foundation engineering.

Uploaded by

Pradum Kumar Gupta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

II B.E.

( Civil
Devi Ahilya University Indore, India
Engineering)
Institute of Engineering & Technology ( Full Time)

Subject Code and Name Instruction Hours Credits

VLR5E1: Geotechnical L Per Week


T P L T P Total
Engineering - I

Duration of Theory Paper: 3


hours 3 1 2 3 1 1 5

Learning Objectives:

To enhance the knowledge on the subject Geotechnical Engineering.

COURSE CONTENTS

UNIT -1

Definition and scope of soil mechanics, soil origin and it’s composition, influence of clay
minerals on engineering behavior. Soil texture and structure. Three phase system, index
properties and their determination. Classification systems based on partical size, texture,
consistency limits unified and AASHTO. Details of it’s classification.

UNIT-2

Soil properties, density, void ratio porosity, moisture- content, grain size analysis. Dry and wet
sieve analysis and sedimentation soil consistency. Atterberg Limits, explanation of various
indices like Flow- Index, plasticity- index, toughness index, liquid index, activity ratio.

UNIT-3

Capillary and gravitational water. Permeability of soil, Darcy’s law, laboratory determination of
permeability and affecting factors. Seepage and flow net, effective neutral and total pressure,
quick sand phenomenon. Compaction characteristics of soil , moisture/density relationship,
factor affecting compaction and control. Compressibility and consolidation of soil, Terzaghi’s
one Dimensional Consolidation theory, pressure valid ratio relationship.

UNIT-4

Strength of soils, stress distribution beneath loaded areas by Boussinesq and water guard’s
analysis, Newmark’s influence chart, contact pressure distribution Mohr-coulomb’s theory of
shear failure of soils. Measurement of shear strength. Shear box test, triaxial and unconfined
compression test, vane shear test. Measurement of pore pressure parameters, critical void ratio,
liquification.

UNIT-5

Stability of slopes, infinite and finite slopes, types of slope failures, rotational slips, stability
number, effect of ground water. Selection of shear strength parameters in slope stability analysis.
Analytical and graphical methods of stability analysis, stability of earth dams.

LIST OF EXPERIMENTS:-

1. Determination of moisture content of soil

2. Determination of specific gravity of soil

3. Determination of field density by sand replacement method

4. Determination of field density by core cutter method

5. Sieve analysis of soil and sedimentation analysis

6. Determination of liquid limit of soil by Casagrande method and cone penetrometer

7. Determination of plastic limit and shrinkage limit of soil.

8. Determination of permeability of soil by:

(a)constant head method (b) variable head method

9. Determination of OMC of soil by Standard proctor compaction test.

Books and references:-

1. Soil Mech. & found. By Dr. B.C. Punmia Lakshmi Publications, Delhi

2. Modern Geotech Engg. By Dr. I Aram Singh- IBT Publishers Delhi

3. Geotech. Engg. By C Venkatramaiah- New Age International Publishers, Delhi

4. Soil Testing for Engg. By T.W. Lambe- John Wiley and Sons. Inc

5. Soil Mech. & Found. By S.K. Garg-Khanna Publishers, Delhi


6. Geotechnical Engineering- Shashi.k.Gulhati & Manoj Datta- MC Craw Hill Education(India)
Pvt. Ltd. New Delhi.

You might also like