Global LCD Panel Exchange Center www.panelook.

com

PRODUCT SPECIFICATION

Doc. Number:

ϭʳ Tentative Specification
ϭʳ Preliminary Specification
Ϯʳ Approval Specification

MODEL NO.: N156B6

SUFFIX: L0B

Customer: Lenovo International

APPROVED BY SIGNATURE

Note

Please return 1 copy for your confirmation with your

signature and comments.

Approved By Checked By Prepared By

ᄘ࿚ໃ ຫၝᎮ ‫ි׆‬ੳ
2011-01-10 2011-01-10 2010-12-21
11:12:46 CST 08:07:22 CST 17:16:14 CST

Version 3.5 10 January 2011 1 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

CONTENTS
1. GENERAL DESCRIPTION .........................................................................................................4
1.1 OVERVIEW ................................................................................................................................ 4
1.2 GENERAL SPECIFICATI0NS ................................................................................................... 4
2. MECHANICAL SPECIFICATIONS ............................................................................................. 4
2.1 CONNECTOR TYPE .................................................................................................................. 4
3. ABSOLUTE MAXIMUM RATINGS ............................................................................................. 4
3.1 ABSOLUTE RATINGS OF ENVIRONMENT .......................................................................... 5
3.2 ELECTRICAL ABSOLUTE RATINGS...................................................................................... 5
3.2.1 TFT LCD MODULE ............................................................................................................5
4. ELECTRICAL SPECIFICATIONS............................................................................................... 6
4.1 FUNCTION BLOCK DIAGRAM............................................................................................... 6
4.2. INTERFACE CONNECTIONS ................................................................................................. 6
4.3 ELECTRICAL CHARACTERISTICS........................................................................................ 8
4.3.1 LCD ELETRONICS SPECIFICATION...............................................................................8
4.3.2 LED CONVERTER SPECIFICATION..............................................................................10
4.3.3 BACKLIGHT UNIT...........................................................................................................11
4.4 LVDS INPUT SIGNAL TIMING SPECIFICATIONS ............................................................. 13
4.4.1 LVDS DC SPECIFICATIONS ...........................................................................................13
4.4.2 LVDS DATA FORMAT ......................................................................................................13
4.4.3 COLOR DATA INPUT ASSIGNMENT ............................................................................14
4.5 DISPLAY TIMING SPECIFICATIONS ................................................................................... 15
4.6 POWER ON/OFF SEQUENCE ................................................................................................ 16
5. OPTICAL CHARACTERISTICS ............................................................................................... 17
5.1 TEST CONDITIONS................................................................................................................. 17
5.2 OPTICAL SPECIFICATIONS .................................................................................................. 17
6. RELIABILITY TEST ITEM ...................................................................................................... 201
7. PACKING................................................................................................................................ 222
7.1 MODULE LABEL .................................................................................................................. 222
7.2 CARTON ................................................................................................................................. 244
7.3 PALLET................................................................................................................................... 255
8. PRECAUTIONS ...................................................................................................................... 266
8.1 HANDLING PRECAUTIONS................................................................................................ 266
8.2 STORAGE PRECAUTIONS .................................................................................................. 266
8.3 OPERATION PRECAUTIONS............................................................................................... 266
Appendix. EDID DATA STRUCTURE......................................................................................... 277
Appendix. OUTLINE DRAWING .................................................................................................. 30

Version 3.5 10 January 2011 2 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

REVISION HISTORY

Version Date Page Description

1.0 Aug.20, 2010 All Spec Ver.1.0 was first issued.

3.5 Nov.01, 2010 All Spec Ver.3.5 was updated for 40pcs LED structure and new spec format.

Version 3.5 10 January 2011 3 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

1. GENERAL DESCRIPTION
1.1 OVERVIEW
N156B6-L0B is a 15.6” (15.547” diagonal) TFT Liquid Crystal Display module with LED Backlight
unit and 40 pins LVDS interface. This module supports 1366 x 768 HD mode and can display
262,144 colors. The optimum viewing angle is at 6 o’clock direction.
1.2 GENERAL SPECIFICATI0NS
Item Specification Unit Note
Screen Size 15.547 diagonal
Driver Element a-si TFT active matrix - -
Pixel Number 1366 x R.G.B. x 768 pixel -
Pixel Pitch 0.252 (H) x 0.252 (V) mm -
Pixel Arrangement RGB vertical stripe - -
Display Colors 262,144 color -
Transmissive Mode Normally white - -
Surface Treatment Hard coating (3H), Glare - -
Luminance, White 220 Cd/m2
Power Consumption Total 5.184 W (Max.) @ cell 0.9 W (Max.), BL 4.284W (Max.) (1)
Note (1) The specified power consumption (with converter efficiency) is under the conditions at VCCS =
3.3 V, fv = 60 Hz, LED_VCCS = Typ, fPWM = 200 Hz, Duty=100% and Ta = 25 ± 2 ºC, whereas mosaic
pattern is displayed.
2. MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal (H) 358.8 359.3 359.8 mm
Module Size Vertical (V) 209 209.5 210 mm (1)
Thickness (T) - 5.2 5.5 mm
Horizontal 349.28 349.58 349.88 mm
Bezel Area
Vertical 197.99 198.29 198.59 mm
Horizontal - 344.232 - mm
Active Area
Vertical - 193.536 - mm
Weight - 430 445 g
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
2.1 CONNECTOR TYPE
Pin40 Pin1

Please refer Appendix Outline Drawing for detail design.

Connector Part No.: IPEX-20455-040E-12 or Tyco 5-2069716-3
User’s connector Part No: IPEX-20453-040T-01

Version 3.5 10 January 2011 4 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

3. ABSOLUTE MAXIMUM RATINGS

3.1 ABSOLUTE RATINGS OF ENVIRONMENT
Value
Item Symbol Unit Note
Min. Max.
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient Temperature TOP 0 +50 ºC (1), (2)
Note (1) (a) 90 %RH Max. (Ta <= 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel surface should be 0 ºC min. and 60 ºC max.

Relative Humidity (%RH)

100
95

80

60
Operating
40

20
8
5 S

-40 -20 0 20 40 60 80
Temperature (ºC)

3.2 ELECTRICAL ABSOLUTE RATINGS

3.2.1 TFT LCD MODULE
Value
Item Symbol Unit Note
Min. Max.
Power Supply Voltage VCCS -0.3 +4.0 V
(1)
Logic Input Voltage VIN -0.3 VCCS+0.3 V
Converter Input Voltage LED_VCCS -0.3 24 V (1)
Converter Control Signal Voltage LED_PWM, -0.3 5 V (1)
Converter Control Signal Voltage LED_EN -0.3 5 V (1)
Note (1) Stresses beyond those listed in above “ELECTRICAL ABSOLUTE RATINGS” may cause
permanent damage to the device. Normal operation should be restricted to the conditions
described in “ELECTRICAL CHARACTERISTICS”.

Version 3.5 10 January 2011 5 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

4. ELECTRICAL SPECIFICATIONS
4.1 FUNCTION BLOCK DIAGRAM

SCAN DRIVER IC
LVDS Display TIMING ONTROLLER
Data & Clock
TFT LCD
PANEL
INPUT CONNECTOR

VCCS DC/DC CONVERTER &

REFERENCE VOLTAGE
GND GENERATOR

DataEDID DATA DRIVER IC

CLKEDID EDID
EEPROM
VEDID

Converter LED CONVERTER BACKLIGHT UNIT

Input Signals

4.2. INTERFACE CONNECTIONS

PIN ASSIGNMENT
Pin Symbol Description Remark
1 NC No Connection (Reserve)
2 VCCS Power Supply (3.3V typ.)
3 VCCS Power Supply (3.3V typ.)
4 VEDID DDC 3.3V power
5 NC No Connection (Reserved for CMI test)
6 CLKEDID DDC clock
7 DATAEDID DDC data
8 Rxin0- LVDS differential data input
R0-R5, G0
9 Rxin0+ LVDS differential data input
10 VSS Ground
11 Rxin1- LVDS differential data input
G1~G5, B0, B1
12 Rxin1+ LVDS differential data input
13 VSS Ground
14 Rxin2- LVDS Differential Data Input
B2-B5,HS,VS, DE
15 Rxin2+ LVDS Differential Data Input
16 VSS Ground
17 RxCLK- LVDS differential clock input
LVDS CLK
18 RxCLK+ LVDS differential clock input
19 VSS Ground
20 NC No Connection (Reserve)
21 NC No Connection (Reserve)
22 VSS Ground
23 NC No Connection (Reserve)

Version 3.5 10 January 2011 6 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

24 NC No Connection (Reserve)
25 VSS Ground
26 NC No Connection (Reserve)
27 NC No Connection (Reserve)
28 VSS Ground
29 NC No Connection (Reserve)
30 NC No Connection (Reserve)
31 LED_GND LED Ground
32 LED_GND LED Ground
33 LED_GND LED Ground
34 NC No Connection (Reserve)
35 LED_PWM PWM Control Signal of LED Converter
36 LED_EN Enable Control Signal of LED Converter
37 NC No Connection (Reserve)
38 LED_VCCS LED Power Supply
39 LED_VCCS LED Power Supply
40 LED_VCCS LED Power Supply

Note (1) The first pixel is odd as shown in the following figure.

1,1 1,2 1,3 1,4 1,Xmax

(odd) (even) (odd) (even)

2,1 2,2
3,1

Pitch

Pitch

Ymax,
Ymax,1
Xmax

Version 3.5 10 January 2011 7 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

4.3 ELECTRICAL CHARACTERISTICS

4.3.1 LCD ELETRONICS SPECIFICATION
Value
Parameter Symbol Unit Note
Min. Typ. Max.
Power Supply Voltage VCCS 3.0 3.3 3.6 V (1)-
Ripple Voltage VRP - 50 - mV (1)-
Inrush Current IRUSH - - 1.5 A (1),(2)
Mosaic ˀ 260 270 mA (3)a
Black ˀ 320 350 mA (3)b
Power Supply Current lcc
Win XP ˀ 265 290 mA
1H2V - 310 340 mA
Note (1) The ambient temperature is Ta = 25 ± 2 ºC.
Note (2) IRUSH: the maximum current when VCCS is rising
IIS: the maximum current of the first 100ms after power-on
Measurement Conditions: Shown as the following figure. Test pattern: black.
+3.3V
Q1 2SK1475

VCCS
C3
FUSE (LCD Module Input)

R1 1uF

47K

(High to Low)
(Control Signal)
Q2
R2

SW 2SK1470

1K
+12V

VR1 47K C2

C1
0.01uF

1uF

VCCS rising time is 0.5ms

Version 3.5 10 January 2011 8 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

Note (3) The specified power supply current is under the conditions at VCCS = 3.3 V, Ta = 25 ± 2 ºC, DC
Current and fv = 60 Hz, whereas a power dissipation check pattern below is displayed.

a. Mosaic Pattern b. Black Pattern

Active Area Active Area

Version 3.5 10 January 2011 9 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

4.3.2 LED CONVERTER SPECIFICATION

Value
Parameter Symbol Unit Note
Min. Typ. Max.

Converter Input power supply voltage LED_Vccs 6.0 12.0 21.0 V

Converter Inrush Current ILEDRUSH - - 1.5 A (1)

Backlight On 2.0 - 5 V
EN Control Level
Backlight Off 0 - 0.5 V

PWM High Level 2.3 - 5 V

PWM Control Level
PWM Low Level 0 - 0.5 V

10 - 100 %
PWM Control Duty Ratio
1 - 100 % (2)
PWM Control Permissive Ripple
VPWM_pp - - 100 mV
Voltage
PWM Control Frequency fPWM 100 - 2K Hz (3)

LED Power Current LED_VCCS =Typ. ILED 288 339 398 mA (4)

Note (1) ILEDRUSH: the maximum current when LED_VCCS is rising,

ILEDIS: the maximum current of the first 100ms after power-on,
Measurement Conditions: Shown as the following figure. LED_VCCS = Typ, Ta = 25 ± 2 ºC, fPWM
= 200 Hz, Duty=100%.

LED_VCCS(Typ)
Q1 IRL3303

C3
FUSE (LED Converter Input)

R1 1uF

47K

(High to Low)
(Control Signal)
Q2
R2

SW=24V IRL3303

1K
LED_VCCS(Typ)

VR1 47K C2

C1
0.01uF

1uF

Version 3.5 10 January 2011 10 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

VLED rising time is 0.5ms

0.5ms
90%

LED_VCC 0V 10%

LED_PWM 0V

100ms
LED_EN 0V
ILEDIS
ILEDRush

ILED

Note (2) If the PWM control duty ratio is less than 10%, there is some possibility that acoustic noise or
backlight flash can be found. And it is also difficult to control the brightness linearity.

Note (3) If PWM control frequency is applied in the range less than 1KHz, the “waterfall” phenomenon on
the screen may be found. To avoid the issue, it’s a suggestion that PWM control frequency should
follow the criterion as below.

PWM control frequency fPWM should be in the range

( N  0.33) f d fPWM d ( N  0.66) f
N : Integer ( N t 3)
f : Frame rate

Note (4) The specified LED power supply current is under the conditions at “LED_VCCS = Typ.”, Ta = 25
± 2 ºC, fPWM = 200 Hz, Duty=100%.

4.3.3 BACKLIGHT UNIT

Ta = 25 ± 2 ºC
Value
Parameter Symbol Unit Note
Min. Typ. Max.
LED Light Bar Power
VL 22.4 25.6 27.2 V (1)(2)(Duty100%)
Supply Voltage

Version 3.5 10 January 2011 11 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

LED Light Bar Power

IL 114 120 126 mA
Supply Current
Power Consumption PL 2.554 3.072 3.472 W (3)
LED Life Time LBL 15000 - - Hrs (4)

Note (1) LED current is measured by utilizing a high frequency current meter as shown below :

VL, IL

LED
Light Bar
Light Bar Feedback
Channels

Note (2) For better LED light bar driving quality, it is recommended to utilize the adaptive boost converter
with current balancing function to drive LED light-bar.
Note (3) PL = IL ×VL (Without LED converter transfer efficiency)
Note (4) The lifetime of LED is defined as the time when it continues to operate under the conditions at Ta =
25 ±2 oC and IL = 24 mA(Per EA) until the brightness becomes Љ 50% of its original value.

Version 3.5 10 January 2011 12 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

4.4 LVDS INPUT SIGNAL TIMING SPECIFICATIONS

4.4.1 LVDS DC SPECIFICATIONS
Value
Parameter Symbol Unit Note
Min. Typ. Max.
(1),
LVDS Differential Input High Threshold VTH(LVDS) - - +100 mV
VCM=1.2V
(1)
LVDS Differential Input Low Threshold VTL(LVDS) -100 - - mV
VCM=1.2V
LVDS Common Mode Voltage VCM 1.125 - 1.375 V (1)

LVDS Differential Input Voltage |VID| 100 - 600 mV (1)

LVDS Terminating Resistor RT - 100 - Ohm -

Note (1) The parameters of LVDS signals are defined as the following figures.

VCM |VID|
Single Ended

0V

VTH(LVDS)
|VID|
Differential 0V
VTL(LVDS)

4.4.2 LVDS DATA FORMAT

CLK+

T/7
Rxin2 IN20 IN19 IN18 IN17 IN16 IN15 IN14

DE Vsync Hsync B5 B4 B3 B2
Rxin1 IN13 IN12 IN11 IN10 IN9 IN8 IN7

B1 B0 G5 G4 G3 G2 G1
Rxin0
IN6 IN5 IN4 IN3 IN2 IN1 IN0

G0 R5 R4 R3 R2 R1 R0

Signal for 1 DCLK Cycle (T)

Version 3.5 10 January 2011 13 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

4.4.3 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input
for the color. The higher the binary input the brighter the color. The table below provides the assignment
of color versus data input.
Data Signal
Color Red Green Blue
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
Green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0
Basic Blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
Colors Cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1
Magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1
Yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Red(0)/Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red(1) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0
Gray Red(2) 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0
Scale : : : : : : : : : : : : : : : : : : :
Of : : : : : : : : : : : : : : : : : : :
Red Red(61) 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0
Red(62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0
Red(63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
Green(0)/Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green(1) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0
Gray Green(2) 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0
Scale : : : : : : : : : : : : : : : : : : :
Of : : : : : : : : : : : : : : : : : : :
Green Green(61) 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0
Green(62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0
Green(63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0
Blue(0)/Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Blue(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
Gray Blue(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
Scale : : : : : : : : : : : : : : : : : : :
Of : : : : : : : : : : : : : : : : : : :
Blue Blue(61) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1
Blue(62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0
Blue(63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
Note (1) 0: Low Level Voltage, 1: High Level Voltage

Version 3.5 10 January 2011 14 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

4.5 DISPLAY TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.
Refresh rate 60Hz
Signal Item Symbol Min. Typ. Max. Unit Note
DCLK Frequency 1/Tc 62.4 69.3 72.8 MHz -
Vertical Total Time TV 772 788 793 TH -
Vertical Active Display Period TVD 768 768 768 TH -
Vertical Active Blanking Period TVB TV-TVD 20 TV-TVD TH -
DE
Horizontal Total Time TH 1456 1466 1492 Tc -
Horizontal Active Display Period THD 1366 1366 1366 Tc -
Horizontal Active Blanking Period THB TH-THD 100 TH-THD Tc -
Refresh rate 50Hz
Signal Item Symbol Min. Typ. Max. Unit Note
DCLK Frequency 1/Tc 57.418 60.44 63.462 MHz -
Vertical Total Time TV 772 788 793 TH -
Vertical Active Display Period TVD 768 768 768 TH -
Vertical Active Blanking Period TVB TV-TVD 20 TV-TVD TH -
DE
Horizontal Total Time TH 1523 1534 1561 Tc -
Horizontal Active Display Period THD 1366 1366 1366 Tc -
Horizontal Active Blanking Period THB TH-THD 168 TH-THD Tc -
Refresh rate 40Hz
Signal Item Symbol Min. Typ. Max. Unit Note
DCLK Frequency 1/Tc 45.93 48.35 50.77 MHz -
Vertical Total Time TV 772 788 793 TH -
Vertical Active Display Period TVD 768 768 768 TH -
Vertical Active Blanking Period TVB TV-TVD 20 TV-TVD TH -
DE
Horizontal Total Time TH 1523 1534 1561 Tc -
Horizontal Active Display Period THD 1366 1366 1366 Tc -
Horizontal Active Blanking Period THB TH-THD 168 TH-THD Tc -
Note (1) Because this module is operated by DE only mode, Hsync and Vsync are ignored.

INPUT SIGNAL TIMING DIAGRAM

Tv
TVD

DE

TH

DCLK
TC
THD
DE

DATA

Version 3.5 10 January 2011 15 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

4.6 POWER ON/OFF SEQUENCE

The power sequence specifications are shown as the following table and diagram.
Value
Symbol Unit Note
Min. Typ. Max.
t1 0.5 - 10 ms
t2 0 - 50 ms
t3 0 - ˀ ms
t4 150 - - ms
t5 200 - - ms
t6 0 - - ms
t7 0 - 10 ms
tA 0.5 - 10 ms
tB 0 ˀ ms
tC 0 - - ms
tD 0 - - ms
tE 0 - - ms
tF 0 - - ms

Power On Power Off

t7
90% 90%

- Power Supply 10% 10%

10%
for LCD, VCCS 0V
t1
t4
t2 t3

- Interface Signal Valid Data

(LVDS Signal of 0V
Transmitter), VI t5 t6
90% 90%

- Power Supply for

10% 10%
LED Converter, 0V
tA tB
LED_VCCS
tC tD

- LED Converter PWM Signal

Dimming Signal, 0V
LED_PWM
tE tF

- LED Converter
Enable Signal, 0V
LED_EN

Note (1) Please don’t plug or unplug the interface cable when system is turned on.
Note (2) Please avoid floating state of the interface signal during signal invalid period.
Note (3) It is recommended that the backlight power must be turned on after the power supply for LCD and the
interface signal is valid.

Version 3.5 10 January 2011 16 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

5. OPTICAL CHARACTERISTICS
5.1 TEST CONDITIONS
Item Symbol Value Unit
o
Ambient Temperature Ta 25r2 C
Ambient Humidity Ha 50r10 %RH
Supply Voltage VCC 3.3 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
LED Light Bar Input Current IL 120 mA
The measurement methods of optical characteristics are shown in Section 5.2. The following items
should be measured under the test conditions described in Section 5.1 and stable environment shown in
Note (5).

5.2 OPTICAL SPECIFICATIONS

Item Symbol Condition Min. Typ. Max. Unit Note

Contrast Ratio CR 500 650 - - (2),(5),(8)
TR - 3 8 ms
Response Time (3),(8)
TF - 8 13 ms
Luminance of White (5P) LAVE 185 220 - cd/m2 (4),(5),(8)
White Variation (5P) GW 80 -- % (5),(6),(8)
White Variation (13P) GW 65 -- % (5),(6),(8)
Color gamut C.G 55 60 % (5),(7),(8)
Tx=0q, TY =0q
Rx 0.617 -
Red Viewing Normal Angle
Ry 0.340 -
Gx 0.320 -
Green
Color Gy Typ.- 0.598 Typ.+ - (1), (5)
Chromaticity Bx 0.03 0.160 0.03 - (8)
Blue
By 0.084 -
Wx 0.313 -
White
Wy 0.329 -
Tx+ 40 45 -
Horizontal
Tx- 40 45 -
Viewing Angle CRt10 Deg. (1),(5),(8)
TY+ 15 20 -
Vertical
TY- 40 45 -

Version 3.5 10 January 2011 17 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

Note (1) Definition of Viewing Angle (Tx, Ty):

Normal
Tx = Ty = 0º

Ty- Ty

TX- = 90º x- 12 o’clock direction

y+
Tx Ty+ = 90º
Tx

6 o’clock
y- x+ TX+ = 90º
Ty- = 90º

Note (2) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.
Contrast Ratio (CR) = L63 / L0
L63: Luminance of gray level 63
L 0: Luminance of gray level 0
CR = CR (1)
CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).

Note (3) Definition of Response Time (TR, TF):

Gray Level 63 Gray Level 63

100%

90%

Optical
Response

Gray Level 0
10%

0%

Time
TR TF

66.67 ms 66.67 ms

Version 3.5 10 January 2011 18 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

Note (4) Definition of Average Luminance of White (LAVE):

Measure the luminance of gray level 63 at 5 points
LAVE = [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5
L (x) is corresponding to the luminance of the point X at Figure in Note (6)
Note (5) Measurement Setup:
The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt
temperature change during measuring. In order to stabilize the luminance, the measurement
should be executed after lighting Backlight for 20 minutes in a windless room.

LCD Module

LCD Panel

USB2000 or equivalent CS-2000T or equivalent

Center of the Screen

Light Shield Room
500 mm
(Ambient Luminance < 2 lux)
ʳ

Note (6) Definition of White Variation (GW):

Measure the luminance of gray level 63 at 5 points
GW5p = {Minimum [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / Maximum [L (1)+ L (2)+ L (3)+ L (4)+ L (5)]}*100%
˄˃̀̀

ˉ ˊ ˋ
˛˂ˇ

˅ ˆ

X : Test Point
˛˂ˇ

X=1 to 13
ˌ ˄ ˄˃
˛
˛˂ˇ

ˇ ˈ
˛˂ˇ

˄˄ ˄˅ ˄ˆ

˄˃̀̀ ˄˃̀̀
˄˃̀̀

˪˂ˇ ˪˂ˇ ˪˂ˇ ˪˂ˇ

˪
Active area

Version 3.5 10 January 2011 19 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

Note (7) Definition of color gamut (C.G%):

C.G%= ΓR G B /ΓR0 G0 B0,*100%
R0, G0, B0 : color coordinates of red, green, and blue defined by NTSC, respectively.
R, G, B : color coordinates of module on 63 gray levels of red, green, and blue, respectively.
ΓR0 G0 B0 : area of triangle defined by R0, G0, B0
ΓR G B: area of triangle defined by R, G, B

˖˜˘ʳ˄ˌˆ˄

˃ˁˌ
˃ˁˋ

˃ˁˊ G0
˃ˁˉ

˃ˁˈ
G
˃ˁˇ

˃ˁˆ R R0
˃ˁ˅
B
˃ˁ˄ B0
˃
˃ ˃ˁ˅ ˃ˁˇ ˃ˁˉ ˃ˁˋ

Note (8) The listed optical specifications refer to the initial value of manufacture, but the condition of
the specifications after long-term operation will not be warranted.

Version 3.5 10 January 2011 20 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

6. RELIABILITY TEST ITEM

Test Item Test Condition Note

High Temperature Storage Test 60ºC, 240 hours
Low Temperature Storage Test -20ºC, 240 hours
Thermal Shock Storage Test -20ºC, 0.5hou̅ЧШ60к, 0.5hour; 100cycles, 1hour/cycle
High Temperature Operation Test 50ºC, 240 hours (1) (2)
Low Temperature Operation Test 0ºC, 240 hours

High Temperature & High Humidity

50ºC, RH 80%, 240hours
Operation Test

150pF, 330Ө, 1sec/cycle

ESD Test (Operation) Condition 1 : Contact Discharge, ̈́8KV (1)
Condition 2 : Air Discharge, ̈́15KV

220G, 2ms, half sine wave,1 time for each direction of

Shock (Non-Operating) (1)(3)
±X,±Y,±Z

1.5G / 10-500 Hz, Sine wave, 30 min/cycle, 1cycle for each

Vibration (Non-Operating) (1)(3)
X, Y, Z

Note (1) criteria : Normal display image with no obvious non-uniformity and no line defect.
Note (2) Evaluation should be tested after storage at room temperature for more than two hour
Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough
so that the module would not be twisted or bent by the fixture.

Version 3.5 10 January 2011 21 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

7. PACKING
7.1 MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.

N156B6-L0B

XXXXX33YMDLNNNN

P/N 93P5714
11S93P5714Z1ZHY7SSSSSS YMM FRU93P5715

(a) Model Name: N156B6 - L0B

(b) Revision: Rev. XX, for example: C1, C2 …etc.
(c) Serial ID: X X X X X X X Y M D L N N N N

Serial No.

Product Line

Year, Month, Date

CMO Internal Use

Revision

CMO Internal Use

Serial ID includes the information as below:

(a) Manufactured Date: Year: 0~9, for 2010~2019
Month: 1~9, A~C, for Jan. ~ Dec.
Day: 1~9, A~Y, for 1st to 31st, exclude I , O and U
(b) Revision Code: cover all the change
(c) Serial No.: Manufacturing sequence of product
(d) Product Line: 1 -> Line1, 2 -> Line 2, …etc.

Version 3.5 10 January 2011 22 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

Version 3.5 10 January 2011 23 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

7.2 CARTON

Figure. 7-2 Packing method

Version 3.5 10 January 2011 24 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

7.3 PALLET

Figure. 7-3 Packing method

Version 3.5 10 January 2011 25 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

8. PRECAUTIONS
8.1 HANDLING PRECAUTIONS
(1) The module should be assembled into the system firmly by using every mounting hole. Be careful
not to twist or bend the module.
(2) While assembling or installing modules, it can only be in the clean area. The dust and oil may cause
electrical short or damage the polarizer.
(3) Use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and
assembly process.
(4) Do not press or scratch the surface harder than a HB pencil lead on the panel because the polarizer
is very soft and easily scratched.
(5) If the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. Do not
use Ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It
might permanently damage the polarizer due to chemical reaction.
(6) Wipe off water droplets or oil immediately. Staining and discoloration may occur if they left on panel
for a long time.
(7) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In
case of contacting with hands, legs or clothes, it must be washed away thoroughly with soap.
(8) Protect the module from static electricity, it may cause damage to the C-MOS Gate Array IC.
(9) Do not disassemble the module.
(10) Do not pull or fold the LED wire.
(11) Pins of I/F connector should not be touched directly with bare hands.

8.2 STORAGE PRECAUTIONS

(1) High temperature or humidity may reduce the performance of module. Please store LCD module
within the specified storage conditions.
(2) It is dangerous that moisture come into or contacted the LCD module, because the moisture may
damage LCD module when it is operating.
(3) It may reduce the display quality if the ambient temperature is lower than 10 ºC. For example, the
response time will become slowly, and the starting voltage of LED will be higher than the room
temperature.

8.3 OPERATION PRECAUTIONS

(1) Do not pull the I/F connector in or out while the module is operating.
(2) Always follow the correct power on/off sequence when LCD module is connecting and operating.
This can prevent the CMOS LSI chips from damage during latch-up.
(3) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while
assembling with converter. Do not disassemble the module or insert anything into the Backlight unit.

Version 3.5 10 January 2011 26 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

Appendix. EDID DATA STRUCTURE

The EDID (Extended Display Identification Data) data formats are to support displays as defined in the
VESA Plug & Display and FPDI standards.
Byte # Byte # Value Value
Field Name and Comments
(decimal) (hex) (hex) (binary)
0 0 Header 00 00000000
1 1 Header FF 11111111
2 2 Header FF 11111111
3 3 Header FF 11111111
4 4 Header FF 11111111
5 5 Header FF 11111111
6 6 Header FF 11111111
7 7 Header 00 00000000
8 8 ID system manufacturer name (LSB) 30 00110000
9 9 ID system manufacturer name (MSB) AE 10101110
10 0A ID system Product Code (LSB) B0 10110000
11 0B ID system Product Code (MSB) 40 01000000
12 0C ID Serial Number (32-bit serial number) 00 00000000
13 0D ID Serial Number (32-bit serial number) 00 00000000
14 0E ID Serial Number (32-bit serial number) 00 00000000
15 0F ID Serial Number (32-bit serial number) 00 00000000
16 10 Week of Manufacture 35 00110101
17 11 Year of Manufacture 13 00010011
18 12 EDID Structure version 01 00000001
19 13 EDID Revision 03 00000011
20 14 Video Input Definition 80 10000000
21 15 Active Area Horizontal Image Size (cm) - 35 cm 23 00100011
22 16 Active Area Vertical Image Size (cm) - 19cm 13 00010011
23 17 Display gamma (gamma x 100)-100, (Gamma 2.2) 78 01111000
24 18 Feature support EA 11101010
25 19 Rx1, Rx0, Ry1, Ry0, Gx1, Gx0, Gy1, Gy0 7B 01111011
26 1A Bx1, Bx0, By1, By0, Wx1, Wx0, Wy1, Wy0 95 10010101
27 1B Rx=0.61 9C 10011100
28 1C Ry=0.343 57 01010111
29 1D Gx=0.342 57 01010111
30 1E Gy=0.581 94 10010100
31 1F Bx=0.162 29 00101001
32 20 By=0.083 15 00010101
33 21 Wx=0.313 50 01010000
34 22 Wy=0.329 54 01010100
35 23 Established Timing 1 00 00000000
36 24 Established Timing 2 00 00000000
37 25 Manufacturer's Timings 00 00000000
38 26 Standard Timing Identification #1 01 00000001
39 27 Standard Timing Identification #1 01 00000001
40 28 Standard Timing Identification #2 01 00000001
41 29 Standard Timing Identification #2 01 00000001

Version 3.5 10 January 2011 27 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

42 2A Standard Timing Identification #3 01 00000001

43 2B Standard Timing Identification #3 01 00000001
44 2C Standard Timing Identification #4 01 00000001
45 2D Standard Timing Identification #4 01 00000001
46 2E Standard Timing Identification #5 01 00000001
47 2F Standard Timing Identification #5 01 00000001
48 30 Standard Timing Identification #6 01 00000001
49 31 Standard Timing Identification #6 01 00000001
50 32 Standard Timing Identification #7 01 00000001
51 33 Standard Timing Identification #7 01 00000001
52 34 Standard Timing Identification #8 01 00000001
53 35 Standard Timing Identification #8 01 00000001
Detailed timing description # 1 Pixel clock (“69.3MHz”, According to
54 12 00010010
36 VESA CVT Rev1.1)
55 37 # 1 Pixel clock (hex LSB first) 1B 00011011
56 38 # 1 H active (“1366”) 56 01010110
57 39 # 1 H blank (“100”) 64 01100100
58 3A # 1 H active : H blank (“1366 :100”) 50 01010000
59 3B # 1 V active (”768”) 00 00000000
60 3C # 1 V blank (”20”) 14 00010100
61 3D # 1 V active : V blank (”768 :20”) 30 00110000
62 3E # 1 H sync offset (”16”) 10 00010000
63 3F # 1 H sync pulse width ("34”) 22 00100010
64 40 # 1 V sync offset : V sync pulse width (”2 : 6”) 26 00100110
# 1 H sync offset : H sync pulse width : V sync offset : V sync width
65 00 00000000
41 (”16: 34 : 2 : 6”)
66 42 # 1 H image size (”344 mm”) 58 01011000
67 43 # 1 V image size (”193 mm”) C1 11000001
68 44 # 1 H image size : V image size (”344 : 193”) 10 00010000
69 45 # 1 H boarder (”0”) 00 00000000
70 46 # 1 V boarder (”0”) 00 00000000
# 1 Non-interlaced, Normal, no stereo, Separate sync, H/V pol
71 18 00011000
47 Negatives
Detailed timing description # 2 Pixel clock (“60.44MHz”, According to
72 9C 10011100
48 VESA CVT Rev1.1)
73 49 #2 Pixel clock (hex LSB first) 17 00010111
74 4A #2 H active (“1366”) 56 01010110
75 4B # 2 H blank (“168”) A8 10101000
76 4C # 2 H active : H blank (“1366 : 168”) 50 01010000
77 4D # 2 V active (”768”) 00 00000000
78 4E # 2 V blank (”20”) 14 00010100
79 4F # 2 V active : V blank (”768 :20”) 30 00110000
80 50 # 2 H sync offset (”51”) 33 00110011
81 51 # 2 H sync pulse width ("34”) 22 00100010
82 52 # 2 V sync offset : V sync pulse width (”3 : 5”) 35 00110101
# 2 H sync offset : H sync pulse width : V sync offset : V sync width
83 00000000
53 (”51: 34 : 3 : 5”) 00
84 54 # 2H image size (”344 mm”) 58 01011000
85 55 # 2V image size (”193 mm”) C1 11000001

Version 3.5 10 January 2011 28 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

86 56 # 2 H image size : V image size (”344 : 193”) 10 00010000

87 57 # 2 H boarder (”0”) 00 00000000
88 58 # 2 V boarder (”0”) 00 00000000
# 2 Non-interlaced ; Normal display, no stereo ; Digital Separate ; V
89 sync POL is negative 18 00011000
59 ; H sync POL is positive
90 5A Flag 00 00000000
91 5B Flag 00 00000000
92 5C Flag 00 00000000
93 5D Data Type Tag 0F 00001111
94 5E Flag 00 00000000
95 5F Middle Refresh Rate #1 (Horizontal active pixels / 8 ) - 31 8C 10001100
96 60 Middle Refresh Rate #1 Image Aspect ratio (16 : 9) 09 00001001
97 61 Middle Refresh Rate #1 Refresh Rate = 50Hz 32 00110010
98 62 Low Refresh Rate #2 (Horizontal active pixels / 8 ) - 31 8C 10001100
99 63 Low Refresh Rate #2 Image Aspect ratio(16 : 9) 09 00001001
100 64 Low Refresh Rate #2 Refresh Rate=40Hz 28 00101000
101 65 Brightness(220 /10 nit) 16 00010110
102 66 Feature flag 09 00001001
103 67 Reserved 00 00000000
104 68 LCD Supplier manufacturer code 0D 00001101
105 69 LCD Supplier manufacturer code, (Hex, LSB first) AF 10101111
106 6A LCD Supplier Product code 50 01010000
107 6B LCD Supplier Product code (Hex, LSB first) 14 00010100
108 6C Flag 00 00000000
109 6D Flag 00 00000000
110 6E Flag 00 00000000
111 6F Data Type Tag FE 11111110
112 70 Flag 00 00000000
113 71 Model Name (N156B6-L0B, 1st character, "N") 4E 01001110
114 72 Model Name (N156B6-L0B, 2nd character, "1" ) 31 00110001
115 73 Model Name (N156B6-L0B, 3rd character, "5") 35 00110101
116 74 Model Name (N156B6-L0B, 4th character, "6" ) 36 00110110
117 75 Model Name (N156B6-L0B, 5th character, "B" ) 42 01000010
118 76 Model Name (N156B6-L0B, 6th character, "6" ) 36 00110110
119 77 Model Name (N156B6-L0B, 7th character, "-" ) 2D 00101101
120 78 Model Name (N156B6-L0B, 8th character, "L" ) 4C 01001100
121 79 Model Name (N156B6-L0B, 9th character, "0" ) 30 00110000
122 7A Model Name (N156B6-L0B, 10th character, "B" ) 42 01000010
Model Name(If <13 char, then terminate with ASCII code 0Ah, set
123 0A 00001010
7B remaining char = 20h)
Model Name (If <13 char, then terminate with ASCII code 0Ah, set
124 20 00100000
7C remaining char = 20h)
Model Name (If <13 char, then terminate with ASCII code 0Ah, set
125 20 00100000
7D remaining char = 20h)
126 7E Extension flag 00 00000000
127 7F Checksum 69 01101001

Version 3.5 10 January 2011 29 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

Appendix. OUTLINE DRAWING

Version 3.5 10 January 2011 30 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

Version 3.5 10 January 2011 31 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

Appendix. LCD MODULE INSPECTION SPECIFICATION

A. Description
These inspection standards shall be applied to LCD Module supplied by CHI MEI Optoelectronics
Corporation.

B. The environmental condition of inspection

The environmental condition and visual inspection shall be conducted as below.
(1) Ambient temperature : 15~25℃
(2) Humidity: 25~75 %RH
(3) External appearance inspection shall be conducted by using a single 20W fluorescent lamp or equivalent
illumination.
(4) Panel visual inspection on the operation condition for cosmetic shall be conducted at the distance 30cm
between the LCD module and eyes of inspector.

(5) Using method for ND Filter

When using ND Filter for judging Mura, placing ND Filter near Mura defect and get close to the
surface of LCD Panel (its distance shall be 1~2cm between the surface of Panel and ND Filter).
Don’t touch the surface of polarizer to avoid scratching polarizer, and then move to the defect
position to judge mura by view angel 90 degree (The viewing angle shall be 90 degree to the right top
of Mura defect with panel)

Version 3.5 10 January 2011 32 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

C. Classification of defects
Defects are classified two types, major defect and minor defect according to the defect. And, the definition of
defects is classified as below.
(1) Major defect
Any defect may result in functional failure, or reduce the usability of product for its purpose. For example,
electrical failure, deformation and etc..
(2) Minor defect
A defect that is not to reduce the usability of product for its intended purpose and un-uniformity, dot defect and
etc..
The criteria on major and/or minor judgement will be according with the classification of defects.

D. Inspection Criteria
(1) Definition of dot defect
Define spec for 2 dot adjacent and minimum distance
2-adjacent(Linked Pixels)

Κsub-Pixel(R,G,B)
Minimum Distance;
Lit to LitΚLЇ=15mm
Unlit to UnlitΚLЇ=5mm
Lit to UnlitΚNot Applicable

L
L
L

L:Sub-Pixel to Sub-Pixel,Sub-Pixel to 2-adjacent or 2-adjacent to 2-adjacent

Version 3.5 10 January 2011 33 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

(2) Display Inspection

a) Ambient Illumination: 250 Lux or more for light on inspection
b) Viewing Angle: Within LCD Viewing Angle Specification
c) Inspection Pattern (Bright dot): In black pattern
Inspection Pattern (Dark dot): In red, green , blue pattern

SXGA+ HD
XGA UXGA
Items WXGA+ HD+
WXGA WUXGA
WSXGA+ FHD
Random N≦2 N≦2(G=1) N≦2(G=0) N≦2(G=0)

Bright dot 2 dots adjacent N≦1(G=0) N≦0 N≦0 N≦0

3 dots adjacent or
N≦0 N≦0 N≦0 N≦0
more
Random N≦3 N≦5 N≦10 N≦3

Dark dot 2 dots adjacent N≦1 N≦1 N≦2 N≦1

3 dots adjacent or
N≦0 N≦0 N≦0 N≦0
more
Lit to Lit L≧15mm L≧15mm L≧15mm L≧15mm

Distance Unlit to Unlit L≧5mm L≧5mm L≧5mm L≧5mm

Lit to Unlit Not allowable Not allowable Not allowable Not allowable
N≦7
N≦10
(SXGA+
(UXGA)
Total bright and dark dot N≦5 WXGA+) N≦5
N≦12
N≦9
(WUXGA)
(WSXGA+)
˗˸˹˸˶̇˼̉˸ʳ˗̂̇ʳʻ˟˼̇˂˨́˿˼̇ʼʳˍʳˡ̂̇˼˶˸˴˵˿˸ʳ˷˸˹˸˶̇˼̉˸ʳ˷̂̇̆ʳ˼́ʳ̇˻˸ʳ̂˹˹˼˶˸ʳ˸́̉˼̅̂́̀˸́̇ʳʻ˅ˈ˃ʳ˿̈̋ʼʳ̊˼˿˿ʳ˵˸ʳ˶̂̈́̇˸˷ʳ
̅˸˺˴̅˷˿˸̆̆ʳ̂˹ʳ˷˸˹˸˶̇˼̉˸ʳ˷̂̇ʳ̆˼̍˸
Display failure (V-line/H-line/Cross line etc.) Not allowable
Mura defect can not show in 50% gray pattern with 8% ND-filter or judge by limit
Mura
sample if necessary

Version 3.5 10 January 2011 34 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

(3) Appearance inspection

a) Ambient Illumination: 500 ~ 700 Lux
b) Viewing Angle: Backlight-Off Condition: At Right Angle To Polarizer Surface
Backlight-On Condition: Within LCD Viewing Angle Specification
c) Inspection Pattern: In White and 32-Gray(Half-Gray)Screens(Backlight-On)

Items Size(mm) Acceptable count

W<0.05 Ignore
1. Scratch(Line Shape) 0.05=<W<0.1; 0.3=<L=<3.0 N=<4
: B/L –off condition 0.10=<W or 3.0<L N=0
Shall be no visible at B/L on.
D<0.2 Ignore
0.2=<D<0.5 N=<5
2. Dent 0.5=<D N=0
: B/L –off condition Spacing between defects shall be more than 30 mm.
(0.2=<D<0.5)
Shall be no visible at B/L on.
D<0.2 Ignore
3. Bubble 0.2=<D<0.5 N=<5
: B/L –off condition 0.5=<D N=0
Shall be no visible at B/L on.
4. Foreign material W<0.05 Ignore
(Line-shape: stain 0.05=<W<0.10; 0.3<L=<2.0 N=<4
inclusion) 0.10<W or 2.0<L N=0
:B/L-on condition Shall be no visible at B/L on.
5. Foreign material D<0.2 Ignore
(Dot-shape: stain 0.2=<D<0.5 N=<5
inclusion)
0.5=<D N=0
:B/L-on condition
D<0.2 Ignore
0.2=<D<0.5 N=<5
0.5=<D N=0
6. Peeling on Polizer edge Bubble or glue shall not be visible within PC bezel
:B/L-off condition opening area with specified inspection viewing angle.
Continuous peeling off on polarizer edge shall be
discussed.
Shall be no visible at B/L on.

b L
W
a
D=(a+b)/2 W: width, LΚlength

Version 3.5 10 January 2011 35 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

E. External Appearance Inspection Criteria

Item Contents
Parts mounting, incomplete assembly, deformation, oxidized, crooked or rusty is not
Screw
permitted.
CCFT cable Cable not continuous、Break-off 、Connector Burn-off /Break-off
*Noticeable scratch and exfoliation coating are not permitted.
Metal frame Scratch
*The oxidized metal is not permitted.
(Bezel)
Incomplete assembly is not permitted.
Scratch The scratch which may causes a problem in practical use is not permitted.
Backlight Break-off Breaking off is not permitted.
Crack The crack is not permitted.
Stain on
The stain which can’t be wiped off is not permitted.
Polarizer
Tape/Label Incorrect position, missed label is not permitted.
Connector Oxidized/rusty connector is not permitted.
Outline size Spec. out is not permitted.

Version 3.5 10 January 2011 36 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

F. Classification of defects

Inspection Item Criteria and Description Defect type

Vertical line Signal input, vertical line off or irregular V-line appears major

Horizontal line Signal input, horizontal line off or irregular H-line appears major

Cross line Pattern signal input, a correct display is not obtained major

No display Signal input, display is dead major

Irregular display Pattern signal input, a correct display is not obtained major

Dots defect Exceed specified standards minor

Scratch and Dent
Exceed specified standards minor
on polarizer
Foreign material Exceed specified standards minor
Mura defect can not show in 50% gray pattern with 8% ND-filter
Mura minor
or judge by limit sample if necessary
Rust, deformation, irregular plating, coating missing etc.
External Appearance minor
A appearance defect that do not affect function or performance
Bezel claw Bezel claw missing or not bent major

Polarizer bubble Exceed specified standards minor

Flicker No noticeable flicker by naked eyes at any gray scale level major
In 50% gray pattern, hold LCD panel TOP edge (PCB side) by
LCD Pooling both hands and swing slightly back and forth 2 times per second minor
for 3 cycles by 15 degrees (Range 30 degrees)

Version 3.5 10 January 2011 37 / 37

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com