Scribd
Upload
389 views3 pages

Dimensions and Dimensional Tolerances of Long Radius Elbows 45 and 90 Degrees and 3D Elbows, NPS 1 - 2 To NPS 48, ASME B16.9

Dimensions and Dimensional Tolerances of Long Radius Elbows 45 and 90 Degrees and 3D Elbows, NPS 1_2 to NPS 48, ASME B16.9

Uploaded by

sennimalai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
389 views3 pages

Dimensions and Dimensional Tolerances of Long Radius Elbows 45 and 90 Degrees and 3D Elbows, NPS 1 - 2 To NPS 48, ASME B16.9

Dimensions and Dimensional Tolerances of Long Radius Elbows 45 and 90 Degrees and 3D Elbows, NPS 1_2 to NPS 48, ASME B16.9

Uploaded by

sennimalai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

EXPLORE the WORLD of PIPING

ttings guide
Dimensions Butt Weld Elbows 45°-90° LR and 3D
ASME B16.9

90° 45° 90° 45°


O.D. Long Rad Long Rad 3D 3D
NPS
D Center to End Center to End Center to End Center to End
A B A B

1/2 21.3 38 16    

3/4 26.7 38 19 57 24

1 33.4 38 22 76 31

1.1/4 42.2 48 25 95 39

1.1/2 48.3 57 29 114 47

2 60.3 76 35 152 63

2.1/2 73 95 44 190 79

3 88.9 114 51 229 95

3.1/2 101.6 133 57 267 111

4 114.3 152 64 305 127

5 141.3 190 79 381 157

6 168.3 229 95 457 189

8 219.1 305 127 610 252

10 273 381 159 762 316

12 323.8 457 190 914 378

14 355.6 533 222 1067 441

16 406.4 610 254 1219 505


SUBMENU FITTINGS
EXPLORE the WORLD of PIPING

90° 45° 90° 45°


O.D. Long Rad Long Rad 3D 3D
NPS
D Center to End Center to End Center to End Center to End
A B A B

18 457 686 286 1372 568

20 508 762 318 1524 632

22 559 838 343 1676 694

24 610 914 381 1829 757

26 660 991 406 1981 821

28 711 1067 438 2134 883

30 762 1143 470 2286 946

32 813 1219 502 2438 1010

34 864 1295 533 2591 1073

36 914 1372 565 2743 1135

38 965 1448 600 2896 1200

40 1016 1524 632 3048 1264

42 1067 1600 660 3200 1326

44 1118 1676 695 3353 1389

46 1168 1753 727 3505 1453

48 1219 1829 759 3658 1516

Dimensions are in millimeters unless otherwise indicated. Wall thickness (t) must be speci ed by customer.

DIMENSIONAL TOLERANCES OF BUTT WELD ELBOWS - 45° AND 90° - LR AND 3D - ASME B16.9 -

Nominal Pipe Size 1/2 to 2.1/2 3 to 3.1/2 4 5 to 8


Outside Diameter + 1.6 1.6 1.6 + 2.4
at Bevel (D) - 0.8 - 1.6
Inside Diameter at End 0.8 1.6 1.6 1.6
Center to End LR (A/B) 2 2 2 2
Center to End 3D (A/B) 3 3 3 3
Nominal Pipe Size 10 to 18 20 to 24 26 to 30 32 to 48
Outside Diameter +4 + 6.4 + 6.4 + 6.4
at Bevel (D) - 3.2 - 4.8 - 4.8 - 4.8
Inside Diameter at End 3.2 4.8 + 6.4 + 6.4
- 4.8 - 4.8
Center to End LR (A/B) 2 2 3 5
Center to End 3D (A/B) 3 3 6 6
Wall Thickness (t) SUBMENU
Not less than 87.5%FITTINGS
of Nominal Wall Thickness
Dimensional tolerances are in millimeters unless otherwise indicated and are equal ± except as noted.

Note:
EXPLORE theMSS
WORLD of PIPING
SP-43 only covers stainless steel buttweld ttings made for use with

Schedule 5S and 10S pipe and Stub Ends suitable for use with Schedule

40S pipe, as de ned in ASME B36.19. The dimensions and dimensional

tolerances de ned in MSS SP-43 are substantially the same as those in

ASME B16.9 speci cations from NPS 1/2 - NPS 24. Except with regard to

the outside diameter at the bevel.

© Werner Sölken 2008 - 2019. All rights reserved.

The industrial revolution allowed us, for the rst time, to start replacing human labour with machines. VITALIK BUTERIN

SUBMENU FITTINGS

You might also like