Scribd
Upload
824 views8 pages

PD 1096: NBCP (Rule 7 & 8) : Flashcards Learn Write Spell Test

This document provides definitions and explanations of key terms related to development controls and building regulations under NBCP (Rule 7 & 8) in the Philippines. It defines acronyms and outlines methods for calculating allowable building footprint, gross floor area, total gross floor area, building height limits, and other metrics based on factors like floor area ratio, total lot area, and setback requirements. A total of 36 terms are defined in the flashcard set.

Uploaded by

ar.dianejose
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
824 views8 pages

PD 1096: NBCP (Rule 7 & 8) : Flashcards Learn Write Spell Test

This document provides definitions and explanations of key terms related to development controls and building regulations under NBCP (Rule 7 & 8) in the Philippines. It defines acronyms and outlines methods for calculating allowable building footprint, gross floor area, total gross floor area, building height limits, and other metrics based on factors like floor area ratio, total lot area, and setback requirements. A total of 36 terms are defined in the flashcard set.

Uploaded by

ar.dianejose
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

PD 1096: NBCP (Rule 7 & 8)

STUDY

Flashcards

Learn

Write

Spell

Test

PLAY

Match

JPT Review Center Handouts Created by

misaki_takumi
Terms in this set (36)

AMBF It is the Allowable Maximum Building


Footprint.

Allowable Maximum It is the resultant area established at


Building Footprint grade level upon which the proposed
building or structure may be erected.

BHL It is the Building Height Limit.

Building Height Limit It is the maximum height to be


allowed for a building or structure
based on their proposed use or
occupancy.

FLAR It is the Floor to Lot Area Ratio.

Floor to Lot Area A development contol that limits the


Ratio designated right over the Gross Floor
Area that can be lawfully generated
or developed for a given Total Lot
Area. Same as FAR (Floor Area
Ratio).
GFA It is the Gross Floor Area.

Gross Floor Area The total floor space within the


perimeter of the permanent external
building walls (inclusive of the main
and auxiliary buildings) such as office
areas, residential areas, corridors,
lobbies, and mezzanine levels.

DC Stands for Development Controls.

Development The body of State and Local laws and


Controls the pertinent executive issuances that
altogether limit the building bulk for
any building or structure on a given
project site.

Development The physical properties of a lot or


Potential property or building or structure
allowing the same to fully evolve into
a viable facility or setting for human
habitation and related activities, as
generally determined by the terative
interaction of applicable
Development Controls.
FDP Stands for Full Development
Potential.

Full Development The physical property of a lot or


Potential property allowing the same to host a
fully evolved building or structure at
minimum permitted development,
and that is intended to act as viable
facilty or setting for human habitation
and related activities, as specially
determined by the iterative
interactive application of
Development controls on the Total
Lot Area.

TGFA Stands for Total Gross Floor Area.

Total Gross Floor The total floor space within a building


Area (inclusive of extensions or additions
to such a building or enclosed area)
and its auxiliary buildings.

TLA Stands for the Total Lot Area.


Total Lot Area The total surface area of a lot or
porperty as generally determined by
the lengths of its frontage, sides and
rear, with the area measurment taken
a common right angle and not
parallel to the surface of the lot or
property, particularly if the same is
sloping.

GFA TLA x FLAR(FAR) = ?

TGFA GFA x multiplier (conversion factor) =


?

Non-GFA or Non- Below grade level such as,


TGFA basements or lower ground levels
are?

AMBF It is determined by applying the


prescribed setbacks and yard or
courts.

PBH Stands for Provisional Building


Height.

Provisional Building TGFA / AMBF = ?


Height
1 to 4 storeys Low-rise building or structure; Non-
Residential

Low-rise, Non- A building or a structure height


residential ranging from 3 meters to 12 meters
plus 1 meter for a parapet wall.

1 to 5 storeys Low-rise building or structure;


Residential

Low-rise, Residential A building or a structure height


ranging from 3 meters to 15 meters
plus 1 meter for a parapet wall.

5 to 15 storeys Medium-rise building or structure;


Non-Residential

Medium-rise, Non- A building or a structure height


residential ranging from 15 meters to 45 meters
plus 1 meter for a parapet wall.

6 to 15 storeys Medium-rise building or structure;


Residential
Medium-rise, A building or a structure height
Residential ranging from 18 meters to 45 meters
plus 1 meter for a parapet wall.

16 storeys or higher High-rise building or structure

High-rise A building or a structure height


ranging from 48 meters or higher
plus 1 meter for a parapet wall.

TGFA 1. GFA + Non-GFA;


2. BHL & TLA;
3. GFA & Multiplier,

Listed above are the methods to


determine the?

GFA FLAR x TLA = ?

AMBF 1. PSO Max;


2. PSO Actual;
3. Lot Types,

Listed above are the methods to


determine the?
this set quickly?
Use Quizlet’s
activities and games
to make studying FLASHCARDS LEARN MATCH

easy, effective and

You might also like