DEAD LOADS

GROUND FLOOR SLAB LOAD

Member elements are accounted by using self-weight command.
Slab Thickness = 150.00
Unit Weight of concrete = 25.00
Dead Load of Slab =(150/1000)*25 = 3.75
Loads due to storage material = 2.00
Total DL = 5.75

FIRST FLOOR SLAB LOAD

Member elements are accounted by using self-weight command.
Slab Thickness = 175.00
Unit Weight of concrete = 25.00
Dead Load of Slab =(175/1000)*25 = 4.38
Loads due to storage material = 2.00
Total DL = 6.38

PARAPET WALL LOADS

Parapet wall ht. is considered as 1.0m through out the length of wall.
230 thk. Parapet wall load (1.0*0.23*20) = 4.60

Cable tray load (DCT): = 1.5

Dead Load of Walls

External Walls
230mm thick CMU Walls.
a. CMU Walls in Concerete-230thk 0.23 x 20 = 4.60
EXTERNAL PERIPHERY WALL LOADS
CMU External Walls
Along Grid -A between 1 to 5 4.6*(4.12) = 18.95

INTERNAL WALL LOADS

CMU Internal Walls
Along Grid -B,C & E- Between 1 TO 5 4.3*(599.75-0.75-594.2) = #REF!
Along Grid -D- Between 1 TO 1' 4.3*(599.75-0.75-594.2) = #REF!
Along Grid -1'- Between C TO D 4.3*(599.75-0.75-594.2) = #REF!

Along Grid -3 & 3'- Between C TO E 4.3*(599.75-0.75-594.2) = #REF!

Along Grid -3 & 4- Between A TO E 4.3*(599.75-0.75-594.2) = #REF!

SOIL LOAD ON FOOTING :-

At Founding level below 1.5m from = 19.00
finished grade level (19 * 1.0 )

Crane Gantry Load

Dead load: (CL-D)
Weight of crane girder = 15

Live Load on Crane Gantry Fy = 87.355

Fx = 4.91
Fz = 22.057

WIND LOAD DUE TO PARAPET WALL:

DEAD LOADS

mm
kN/m3
kN/m2
kN/m2
kN/m2

mm
kN/m3
kN/m2
kN/m2
kN/m2

Average ht=1.0m considered

kN/m

kN/m2

kN/m2
kN/m

kN/m (@ +594.200 m level)

kN/m (@ +594.200 m level)

kN/m (@ +594.200 m level)

kN/m (@ +594.200 m level)

kN/m (@ +594.200 m level)

kN/m2

kN

kN

kN
kN
CERT'D

SM
APP'D

SM
CHEK'D

SKP

DESIGN OF RETAINING WALL FOR BASEMENT

DATA

Density of soil gs = 20 kN/m3 As per soil report

Submerged Unit Weight of soil gsub = 11 kN/m 3

Density of concrete gc = 24 kN/m3

BASE DESIGN

f
DESCRIPTION

Angle of repose = 38 Degrees As per soil report

Coefficient of earth pressure at rest Ko = 0.38 As per soil report

Effective height of wall hw = 3.500 m From top of raft slab to

the top of Basement wal
Water table height hwater = 0.000 m (+0.300m Lvl)

Thickness of basement wall tw = 250 mm

Compressive Strength of concrete fc' = 27.6 MPa Below Grade

for design purpose
Yied Strength of steel fy = 420 MPa
DAR
BY

LOADINGS
23.09.13
DATE

Loads due to soil pressure and surcharge are considered in the design.
Ps Ko x gsubx hw
NO.

Earth pressure at the base = ( 0.38 x 11 x 3.5)

A

REVISIONS = 14.630 kPa

DESIGNED

BY:- RVR Hydrostatic Pressure Pw ( 10 x 0)

DATE:- 23.09.13 Pw = 0.000 kPa
CHECKED Surcharge pressure due to transport load from the nearest asphalt area
BY:- SKP = (surcharge Pressure calculated for Vehicle Load-2FT + Vehicle Load-3FT) Refer Surcharge due to
DATE:- 23.09.13 Psur = (3.02+1.24) = 4.261 kPa Mobile Substation
OPRG. DEPT

BY:- Load due to earth pressure Wsoil = ( 1/2 x 14.63 x 3.5) Per m run of wall
DATE:- = 25.603 kN/m
ENG'G. DEPT. Load due to hydrostatic pressure Ww = ( 1/2 x 0 x 0) Per m run of wall
BY:- = 0.000 kN/m
DATE:- Load due to surcharge Wsur = (Psur x 3.5 ) Per m run of wall
CERTIFIED. = 14.914 kN/m
BY:-

DATE:- AS BUILT BY DATE

DOCUMENT TITLE INDEX PLANT NO DOCUMENT NO. SHEET NO.
THIS DRAWING IS NOT
TO BE USED FOR
CONSTRUCTION OF
ANALYSIS AND DESIGN OF 13.8 KV SWITCHGEAR AND
FOR ORDERING
MATERIALS UNTIL
CONTROL BUILDING
CONSTRUCTION OF KING FAHAD DISTRICT 115/13.8KV
A T449 EE-255491
CERTIFIED AND
DATED SUBSTATION-1
APP'D CERT'D

SM

THIS DRAWING IS NOT

TO BE USED FOR
CONSTRUCTION OF
FOR ORDERING
SM

MATERIALS UNTIL
CERTIFIED AND
DATED
DAMMAM SAUDI ARABIA JOB ORDER NO. 4000000615/00 DOC.CON.SHT EE-2554
APP'D CERT'D

SM
SM
CHEK'D

SKP

DESIGN

The design is carried out by assuming the wall to act as a propped cantilever fixed
at the base and pinned at the ground floor level.
Ultimate maximum bending moment at bottom of wall shall be calculated by using
the equations as per Reynolds Handbook. (Table no 26)
Load factor for earth pressure loads = 1.6 Cl 9.2.4 of ACI 318
Maximum Bending moment M per m = (2xW x h / 15 + W x h / 8)
length of wall (2x25.603x3.5/15)+(14.9135x3.5/8) (Triangular load + Udl)
M = 18.473 kNm Table 26 Reynolds
Load due to CMU wall -200 thk = ( 4.745-0.3-.2) x 4.72 kPa
w = 20.036 kN/m
BASE DESIGN
DESCRIPTION

Moment due wall load wl /12 2

= 1.67 kNm
Factored Bending moment Mu = 1.6 x 18.473+1.6697 Handbook
= 32.228 kNm

Design Of Vertical Reinforcement : (Astvr)

Considering per m length of wall b = 1000 mm

Clear cover to main reinforcement d' = 75 mm
Effective depth of the member d = ( 250 - 75 - 6 )
= 169 mm
Strength reduction factor f = 0.9 Cl 9.3.2 of ACI 318
Ru = (Mu / f) x b x d 2

Ru = 1.25
Percentage of steel required r = 1/ m x (1-sqrt(1-(2Ru x m / fy))
m = fy / 0.85 x fc'
DAR
BY

= 17.90
r = 0.31%
23.09.13
DATE

But Minimum percentage of steel rmin = 0.12% Cl 14.3.2(a) of ACI 318

Dia of the reinforcemnt assumed db = 12 mm
523.9 mm2
NO.

Area of steel required Astvr =

A

REVISIONS
DESIGNED Spacing of 12 dia bars required = 216 mm
BY:- RVR Provide 12 dia bars @ 200 mm C/C vertically on both faces.
DATE:- 23.09.13 Percentage of steel provided r prov. = 0.33%
CHECKED Hence Ok
BY:- SKP Design Of Horizontal Reinforcement (Asthr)
DATE:- 23.09.13

OPRG. DEPT Minimum precentage of steel = 0.20% Cl 14.3.3(a) of ACI 318

BY Area of steel required Asthr. = 338
DATE:- Dia of the reinforcemnt assumed db = 12
ENG'G. DEPT. Spacing of 12 mm dia bar = 669.2 mm
BY:- Provide 12 dia bars @ 200 mm C/C horizontally on both faces.
DATE:-

CERTIFIED.

BY:-

DATE:- AS BUILT BY DATE

APP'D CERT'D

SM
SM

DOCUMENT TITLE INDEX PLANT NO DOCUMENT NO. SHEET NO.

THIS DRAWING IS NOT
TO BE USED FOR
ANALYSIS AND DESIGN OF 13.8 KV SWITCHGEAR AND
CONSTRUCTION OF CONTROL BUILDING
FOR ORDERING
MATERIALS UNTIL
A T449 EE-255491
CERTIFIED AND
CONSTRUCTION OF KING FAHAD DISTRICT 115/13.8KV
DATED SUBSTATION-1
DAMMAM SAUDI ARABIA JOB ORDER NO. 4000000615/00 DOC.CON.SHT EE-25548
CERT'D

SM
APP'D

SM
CHEK'D

SKP

Check for Shear :-

Maximum shear force ((4 / 5 xF +5/8xF) 29.803 kN Cl 9.2.4 of ACI 318
Factored Shear force Vu = 1.6 x 29.803 (Triangular load + Udl)
= 47.68 kN
Allowable shear fVc = 0.75 x [ (1/ 6) x sqrt (fc') x b x d]
fVc = 111.0 kN

Factored shear force is less than allowable shear force. So safe.

BASE DESIGN
DESCRIPTION

DAR
BY

23.09.13
DATE
NO.

REVISIONS
DESIGNED

BY:- RVR

DATE:- 23.09.13

CHECKED

BY:- SKP

DATE:- 23.09.13

OPRG. DEPT

BY

DATE:-

ENG'G. DEPT.

BY:-

DATE:-

CERTIFIED.

BY:-

DATE:- AS BUILT BY DATE

DOCUMENT TITLE INDEX PLANT NO DOCUMENT NO. SHEET NO.
THIS DRAWING IS NOT
TO BE USED FOR
ANALYSIS AND DESIGN OF 13.8 KV SWITCHGEAR AND
CONSTRUCTION OF CONTROL BUILDING
FOR ORDERING
MATERIALS UNTIL
CONSTRUCTION OF KING FAHAD DISTRICT 115/13.8KV
A T449 EE-255491
CERTIFIED AND
DATED SUBSTATION-1
APP'D CERT'D

SM

THIS DRAWING IS NOT

TO BE USED FOR
CONSTRUCTION OF
FOR ORDERING
MATERIALS UNTIL
SM

CERTIFIED AND
DATED

DAMMAM SAUDI ARABIA JOB ORDER NO. 4000000615/00 DOC.CON.SHT EE-25548

From top of raft slab to
the top of Basement wall

for design purpose

Refer Surcharge due to

REV.

A
EE-255489
(Triangular load + Udl)

Cl 14.3.2(a) of ACI 318

Cl 14.3.3(a) of ACI 318

 REV.

EE-255489
(Triangular load + Udl)

REV.

A
EE-255489
APP'D CERT'D

SM
SM
CHEK'D

SKP

SURCHARGE DUE TO TRANSPORT LOAD WITH WHEEL AT 8FT DISTANCE

Type of Vehicle assumed = Mobile Substation

Axle load = 44095 lbs = 196.13 kN

Distance of wheel from the

face of Retaining wall = 8.0 ft = 2438 mm.
BASE DESIGN
DESCRIPTION

P(V) = 22.0475 Kips = 98.07 kN (Load per wheel)

H = 10.827 ft = 3.300 m
HL(X) = 8 ft = 2.44 m

m = 0.74

n = Z/H

sh = for m < 0.40 = 0.28*V*n2/[H2*(0.16+n2)3]

sh = for m > 0.40 = 1.77*V*n2*m2 /[H2*(m2+n2)3]

n Depth Horizontal Pressure

DAR
BY

[Z/H] ( Z ) p1 pQ = p1*cos2(1.1y)
Angle (y) in Radian
ft 2
26.09.13

ft.
p/
DATE

0.000 0.175 0.349 0.524 0.698 0.873 1.047 1.222 1.396 1.550
ki

0.00 0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.10 1.083 0.011 0.011 0.010 0.009 0.007 0.005 0.003 0.002 0.001 0.000 0.000
NO.

REVISIONS 0.20 2.165 0.036 0.036 0.035 0.031 0.025 0.019 0.012 0.006 0.002 0.000 0.001
DESIGNED 0.30 3.248 0.064 0.064 0.061 0.055 0.045 0.033 0.021 0.011 0.003 0.000 0.001
BY:- RVR 0.40 4.331 0.083 0.083 0.080 0.071 0.058 0.043 0.027 0.014 0.004 0.000 0.001
DATE:- 26.09.13 0.50 5.414 0.090 0.090 0.087 0.077 0.063 0.047 0.030 0.015 0.005 0.000 0.002
CHECKED 0.60 6.496 0.088 0.088 0.085 0.076 0.062 0.046 0.029 0.015 0.004 0.000 0.002
BY:- SKP 0.70 7.579 0.080 0.080 0.077 0.069 0.056 0.041 0.026 0.013 0.004 0.000 0.001
DATE:- 26.09.13 0.80 8.662 0.070 0.070 0.067 0.060 0.049 0.036 0.023 0.012 0.004 0.000 0.001
OPRG. DEPT 0.90 9.745 0.059 0.059 0.057 0.051 0.042 0.031 0.019 0.010 0.003 0.000 0.001
BY 1.00 10.827 0.049 0.049 0.047 0.042 0.035 0.025 0.016 0.008 0.002 0.000 0.001
DATE:-

ENG'G. DEPT. Average lateral pressure [ of all pQ values ]

BY:- = 0.026 kip/ft2
DATE:- = 1.245 kPa
CERTIFIED.

BY:-
APP'D CERT'D

SM
SM

DATE:- AS BUILT BY DATE

DOCUMENT TITLE INDEX PLANT NO DOCUMENT NO. SHEET NO.
THIS DRAWING IS NOT
TO BE USED FOR ANALYSIS AND DESIGN OF 13.8 KV SWITCHGEAR AND CONTROL
CONSTRUCTION OF
FOR ORDERING
MATERIALS UNTIL
BUILDING A T449 EE-255491
CERTIFIED AND
DATED CONSTRUCTION OF KING FAHAD DISTRICT 115/13.8KV SUBSTATION-1
DAMMAM SAUDI ARABIA JOB ORDER NO. DOC.CON.SHT
APP'D CERT'D

SM
SM
CHEK'D

SKP

Horizontal Pressure distribution along Depth of Wall [ @ Centre of Wheel ]

mH V

0.00 0.02 0.04 0.06 0.08 0.10

0.00

1.00
ALL
BASE DESIGN
DESCRIPTION

DEPTHOFW

2.00

3.00

4.00

5.00

6.00

7.00
DAR
BY

8.00
26.09.13
DATE

9.00
SURCHARGE PRESSURE
NO.

REVISIONS
Pressure at angle "y"

DESIGNED

BY:- RVR Horizontal Pressure distribution along width at any Height "Z"
DATE:- 26.09.13

CHECKED
y Angle with Centre of Wheel (y)
BY:- SKP

DATE:- 26.09.13 0.000 0.400 0.800 1.200 1.600

OPRG. DEPT
0.000

BY 0.020 pQ
DATE:-
0.040
ENG'G. DEPT.

BY:-
0.060

DATE:- 0.080
CERTIFIED.
0.100
BY:-
APP'D CERT'D

SM
SM

DATE:- AS BUILT BY DATE

DOCUMENT TITLE INDEX PLANT NO DOCUMENT NO. SHEET NO.
THIS DRAWING IS NOT
TO BE USED FOR ANALYSIS AND DESIGN OF 13.8 KV SWITCHGEAR AND CONTROL
CONSTRUCTION OF
FOR ORDERING
MATERIALS UNTIL
BUILDING A T449 EE-255491
CERTIFIED AND CONSTRUCTION OF KING FAHAD DISTRICT 115/13.8KV SUBSTATION-
DATED 1
DAMMAM SAUDI ARABIA JOB ORDER NO. DOC.CON.SHT
SHEET NO. REV.

EE-255489
SHEET NO. REV.

EE-255489