DUAL CIRCUIT HEATER-COOLER UNIT
MAQUET HCU 30
TOMORROW’S TECHNOLOGY TODAY
MAQUET – THE GOLD STANDARD
MAQUET Cardiopulmonary – tomorrow’s heater-cooler The MAQUET dual circuit heater-cooler unit HCU 30 has
unit today: MAQUET is a global player for complete medical been available for several years and has established itself
technology solutions for operating theatres and intensive as “The Gold Standard” in performance and design. The
care units. The MAQUET Cardiopulmonary division has exten- HCU 30 offers safe, accurate, fast and independent regula-
sive experience in heart surgery with continuous and inno- tion of both patient and cardioplegia circuit temperatures.
vative product development. The MAQUET Cardiopulmonary
product portfolio includes the entire range of perfusion and MAQUET – The Gold Standard.
life support systems, tubing sets and cannulae as well as
standard products for the perfusion and surgery teams.
MAQUET HCU 30
FOR DUAL CIRCUIT HEATING AND COOLING
HCU 30 – incorporating two independent circuits for Independently controllable water supply circuits with very
supplying temperature controlled water to any three high cooling and heating capabilities: The exceptional
components: The MAQUET HCU 30 can supply indepen- cooling capacity of the HCU 30 is due to its fast ice building
dently temperature controlled water to cardioplegia and technology and powerful compressor. The ice accumulates
oxygenator heat exchangers in extracorporeal circuits and an initial cooling effect almost three times greater than
to patient mattresses or blankets. conventional heater-cooler units. This results in reduced
patient cooling times and contributes to more accurate and
The HCU 30 is part of a unique medical system with a full faster water temperature changes. A significant and addi-
family of products from a single source to supply the needs tional benefit is that this ice building method allows the
of the perfusion, surgical and nursing teams. This system HCU 30 to operate in most cases without a running com-
approach ensures optimal patient care and work processes pressor. This eliminates disturbing noise from the compres-
as well as more planning certainty and greater economy sor and fan.
for decision makers and planners.
Rapid temperature change and accuracy: The water tem-
perature of the heater-cooler unit HCU 30 from MAQUET is
controlled by very precise electronics and, together with the
cooling circuit and an automatically controlled mixing valve,
enables water temperatures to be changed rapidly with the
chosen temperatures being maintained accurately to ± 0.3
degree Celcius.
The simple but sophisticated user interface is intuitive and The HCU 30 can also be controlled by an optional
offers the operator full control. remote control unit (RCU 30).
Effective and fast water circuit and device priming and Modern external design with a full graphic display and
de-airing: The design of the HCU 30 internal components control panel: The design of the HCU 30 with an elegant
and water flow pathway allows air to be dispelled and elimi- and easy to clean polyurethane housing, user friendly graphic
nated rapidly from both internal and external circuits. This display and easy-roll castors makes it both a pleasure to use,
results in very fast circuit set-up and de-airing. simple to clean and easy to move and position in the operat-
ing room. The small footprint helps save valuable OR space.
Unique and fast emptying of water circuits after use:
An emptying procedure allows water in external water lines Remote control unit: The HCU 30 can be controlled by the
and devices to be sucked back into the HCU 30 at the end optional remote control unit RCU 30 increasing flexibility of
of use. This virtually eliminates water spillage thus reducing positioning in crowded ORs. The remote control unit also
the risk of slippery and wet floors. At the same time it both provides for automatic gradient temperature control as an
shortens and facilitates pack-down time for the HCU 30 option.
after use.
Compatible with JOCAP XL: During use, data from the
Integral water de-contamination and cleaning cycle: HCU 30 can be transferred to the MAQUET JOCAP XL
Both water and water paths in the HCU 30 can be heated perfusion data recording and management software. This
to 90 °C in a special cleaning cycle to prevent the growth provides the opportunity to accurately and automatically
of bacteria and other microbes. This reduces the need for record temperature measurements, making caseload review
water change-out and manual cleaning thus assuring con- and outcomes management easy and straightforward.
sistent water cleanliness and saving time.
Technical Data HCU 30
Control range 1.0 °C to 40.5 °C
Setting resolution 0.1 °C
Temperature measurement accuracy ± 0.3 °C
Temperature display range 0.0 °C to 99.9 °C
Cooling system Compressor refrigeration, ice-making
Tank volume 26 l
Initial cooling capacity (relative 20 °C) 6250 kJ
Continuous cooling capacity 1186 W (4270 kJ/ h)
Heating system Electrical heater
Capacity (maximum values) 800 – 1150 W (100 – 120 V, 16 A), 2100 – 3000 W (200 – 240 V, 16 A)
Circulation system Pressure pump
Flow capacity, main circuit Approximately 21 l /min at zero pressure head (adjustable)
Flow capacity, cardioplegia circuit Approximately 7 l /min
Maximum pressure, main circuit Approximately 2.4 bar / 1800 mmHg / 35 psi (adjustable)
Maximum pressure, cardioplegia circuit Approximately 0.9 bar / 684 mmHg / 13 psi
Mains, high voltage 200, 220, 230 and 240 V
Mains, low voltage 100, 110, 115 and 120 V
Frequency 50 and 60 Hz
Power tolerance ± 10 %
Mains fuse 20 A
Current limitation options, 200 to 240 volt 10, 12, 14 and 16 A
Current limitation options, 100 to 120 volt 16 A
Maximum power consumption 3840 W (240 V/ 16 A)
Dimensions (H x W x D) 1060 x 465 x 525 mm (41.7 x 18.3 x 20.7 inches)
Weight, empty Approximately 95 kg (209.4 lbs)
Weight, full Approximately 121 kg (266.7 lbs)
For order informations please ask your local trader.
® MAQUET Registered Trademark of MAQUET GmbH & Co. KG · Reg. QUG: MCP-BR-10000620-EN-02 · Copyright by MAQUET, Rastatt · 2000 · 08/07 · We reserve the right to make technical and construction changes.
MAQUET Cardiopulmonary AG
Hechinger Straße 38
D-72145 Hirrlingen, Germany
Phone: +49 (0) 7478 921-0
Fax: +49 (0) 7478 921-100
info @ maquet-cp.com
GETINGE GROUP is a leading global provider of equipment and
www.maquet.com systems that contribute to quality enhancement and cost efficiency
within healthcare and life sciences. Equipment, services and tech-
For local contact: nologies are supplied under the brands ARJO for patient hygiene,
patient handling and wound care, GETINGE for infection control
Please visit our website and prevention within healthcare and life science and MAQUET for
www.maquet.com Surgical Workplaces, Cardiopulmonary and Critical Care.
