TCDS NUMBER E4EA

U.S. DEPARTMENT OF REVISION: 24*

TRANSPORTATION DATE: June 21, 2007

FEDERAL AVIATION ADMINISTRATION PRATT & WHITNEY CANADA

TYPE CERTIFICATE DATA SHEET MODELS:

E4EA PT6A-6 PT6A-25 PT6A-40 PT6A-61

PT6A-6A PT6A-25A PT6A-41 PT6A-61A
PT6A-6B PT6A-25C PT6A-41AG PT6A-65B
PT6A-6/C20 PT6A-27 PT6A-42 PT6A-65R
PT6A-11 PT6A-28 PT6A-42A PT6A-65AR
PT6A-11AG PT6A-29 PT6A-45 PT6A-65AG
PT6A-15AG PT6A-34 PT6A-45A PT6A-110
PT6A-20 PT6A-34B PT6A-45B PT6A-112
PT6A-20A PT6A-34AG PT6A-45R PT6A-114
PT6A-20B PT6A-35 PT6A-50 PT6A-114A
PT6A-21 PT6A-36 PT6A-60 PT6A-116
PT6A-38 PT6A-60A PT6A-121
PT6A-60AG PT6A-135
PT6A-135A
PT6A-52
PT6B-9
PT6B-35F
PT6D-114A

Engines of models described herein conforming with this data sheet (which is part of Type Certificate Number E4EA) and other
approved data on file with the Federal Aviation Administration, meet the minimum standards for use in certificated aircraft in
accordance with pertinent aircraft data sheets and applicable portions of the Federal Aviation Regulations, provided they are installed,
operated, and maintained as prescribed by the approved manufacturer's manuals and other approved instructions.

TYPE CERTIFICATE (TC) HOLDER: Pratt & Whitney Canada Corp.

(Formerly Pratt & Whitney Canada, Inc., Pratt & Whitney Aircraft of
Canada, Ltd., and United Aircraft of Canada, Ltd.)
Longueuil, Quebec, Canada J4G 1A1

I. MODEL TYPE (see pages 2, 3, 4, PT6A-6, -6A, -6B, -6/C20, -11, -11AG, -15AG, -20, -20A -20B, -21, -25, -25A, -25C,
5, 6, 7) -27, -28, -29, -34, -34B, -34AG, -35,
-36, -110, -112, -114, -114A, -116, -121, -135, -135A, PT6D-114A

Free turbine turbo-prop / 3 axial plus one centrifugal stage compressor / single annular
combustion chamber, single-stage gas generator turbine / single-stage power turbine
II. MODEL TYPE (see pages 7, 8, 9, PT6A-38, -40, -41, -41AG, -42, -42A, -45, -45A, -45B, -45R, -50, -60, -60A, -60AG, -
10) 61, -61A, -52

Free turbine turbo-prop / 3 axial plus one centrifugal stage comp / single annular
combustion chamber / single stage gas generator turbine / two stage power turbine
III. MODEL TYPE (see pages 10-11) PT6A-65B, -65R, -65AR, -65AG

Free turbine turbo-prop / 3 axial plus one centrifugal stage comp / single annular
combustion chamber / single stage gas generator turbine / two stage power turbine

*
PAGE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
REV. 24 22 22 22 22 22 21 23 23 22 22 22 23 24 23 23 23 23 23 23 22 23
LEGEND: "- -" INDICATES "SAME AS PRECEDING MODEL"
"---" NOT APPLICABLE
NOTE: , SIGNIFICANT CHANGES ARE BLACK-LINED IN THE LEFT MARGIN.
TCDS E4EA PAGE 2

IV. MODEL TYPE (see pages 11-12) PT6B-9, -35F

Free turbine turboshaft (free turbine turboprop -35F) / 3 axial plus one centrifugal stage
comp / single annular combustion chamber / single stage gas generator turbine / single
stage power turbine

I. MODELS PT6A-6 PT6A-6A PT6A-6B PT6A-11, PT6A-20, -20A, -

-11AG 20B,-6/C20
REDUCTION GEAR RATIO .0668:1 -- -- -- --
RATINGS

Maximum continuous at sea level

Equivalent shaft hp. 525 -- -- 528 579
Shaft hp. 500 -- -- 500 550
Jet thrust, lb. 62 -- -- 70(75,-11AG) 72
Output rpm 2,200 -- -- -- --
Gas generator rpm 38,100 -- -- -- --
Takeoff (5 min.) at sea level
Equivalent shaft hp. 578 -- -- 528 579
Shaft hp. 550 -- -- 500 550
Jet thrust, lb. 70 -- -- - -(75, 11AG) 72
Output rpm 2,200 -- -- -- --
Gas generator rpm 38,100 -- -- -- --
Maximum reverse
Shaft hp. --- 500 -- 475 500
Output rpm (max) --- 2,100 -- -- --

Output Shaft Flanged -- -- -- --

4.250" B.C.,
8 holes .594 +
.005"
diameter (See
P&WC
Installation
Drawing)
FUEL (See NOTE 8) Fuels -- -- -- --
conforming to
P&WC Spec.
CPW204 and
CPW46. For
PT6-AG
engines
CPW381
also.
OIL See NOTE 9 -- -- -- --
OIL TANK CAPACITY, gal. 2.3 -- -- -- --
USABLE OIL TANK CAPACITY, 1.5 -- -- -- --
gal.
USABLE OIL WHEN INVERTED, --- --- --- --- ---
gal.
PRINCIPAL DIMENSIONS, in.
Length 61.89 -- -- -- --
Nominal diameter 18.29 -- -- -- --
Maximum radius 10.85 -- -- 11.50 -10.85
(excluding exhaust ports)
WEIGHT (DRY) 280 284 -- 339 286(20, 6/C20)
(includes basic engine, fuel 340(-11AG) 289(20A, 20B)
and ignition systems but ex-
cludes propeller governor (-6 and
-20models only) and ignition power
source)
TCDS E4EA PAGE 3

I. MODELS (cont.) PT6A-6 PT6A-6A PT6A-6B PT6A-11, PT6A-20, -20A, -

-11AG 20B,
-6/C20
CENTER OF GRAVITY
(dry weight) (in.)

Forward of mount plane 4.20 4.40 -- 3.18 4.14(20, 6/C20

4.58(20A, 20B)

Aft of forward mount plane --- --- --- --- ---

Below engine centerline 0.34 -- -- 0.26 0.45(20, 6/C20)

20A, 20B)
Right of engine centerline 0.32 -- -- 0.36 0.07(20, 6/C20)
0.08(20A, 20B)

PT6A-21,-25, PT6A-25C PT6A-15AG, PT6A-29 PT6A-34,-34AG,

-25A -27, -28 -34B,
-36
REDUCTION GEAR RATIO .0668:1 .0663:1 -- -- --

RATINGS

Maximum continuous at sea level

Equivalent shaft hp. 580 783 715 778 783
Shaft hp. 550 750 680 750 --
Jet thrust, lb. 75 82 90 71 82
Output rpm 2,200 -- -- -- --
Gas generator rpm 38,100 -- -- -- --
Takeoff (5 min.) at sea level
Equivalent shaft hp 580 783 715 778 783
Shaft hp. 550 750 680 750 --
Jet thrust, lb. 75 82 90 71 82
Output rpm 2,200 -- -- -- --
Gas generator rpm 38,100 -- -- -- --

Maximum reverse
Shaft hp 500 720 620 750 720
Output rpm (max) 2,100 -- -- -- --

Output Shaft Flanged -- -- -- --

4.250" B.C., 8
holes .594 +
.005"
diameter (See
P&WC
Installation
Drawing)
FUEL (See NOTE 8) Fuels con- -- -- -- --
forming to
P&WC Spec.
CPW204 &
CPW46. For
PT6-AG
engines
CPW381 also.
OIL See NOTE 9 -- -- -- --
TCDS E4EA PAGE 4

I. MODELS (Cont.)) PT6A-21, PT6A-25C PT6A-15AG, PT6A-29 PT6A-34,

-25, -25A -27, -28 -34AG, -34B,
-36
OIL TANK CAPACITY, gal 2.8(-25, -25A) -- 2.3 -- --

USABLE OIL TANK CAPACITY, 1.5 -- -- -- --

gal.
USABLE OIL WHEN INVERTED, .25(-25, -25A) -- --- --- ---
gal.
PRINCIPAL DIMENSIONS, in.
Length 61.89((62.91,- 62.91 61.89 -- --
25,-25A)
Nominal diameter 18.29(23.00, - 23.00 18.29 -- --
25, -25A)
Maximum radius 10.85(16.00, - 16.00 11.50 -- --
(excluding exhaust ports) 25, -25A)
WEIGHT (DRY) 337 (-21) 355 337 -- 340 (353 -34B)
(includes basic engine, fuel 362 (-25)
and ignition systems but ex- 352 (-25A)
cludes propeller governor (-6, -20,
and PT6D-114A models only) and
ignition power source)
CENTER OF GRAVITY
(dry weight) (in.)

Forward of mount plane 3.04(-21) 3.00 3.04 -- - -(3.38 -34B)

3.00(-25, -25A)
Aft of forward mount plane --- --- --- --- ---

Below engine centerline 0.32(-21) 0.47 0.32 -- - -(0.37 -34B)

0.47(-25, -25A)
Right of engine centerline 0.20(-21) 0.29 0.20 -- - -(0.38 -34B)
0.29(-25, -25A)

PT6A-110 PT6A-112 PT6A-114 PT6A-114A PT6A-116

REDUCTION GEAR RATIO .0576:1 -- -- -- --

RATINGS

Maximum continuous at sea level

Equivalent shaft hp 502 528 632 725 736
Shaft hp 475 500 600 675 700
Jet thrust, lb. 68 70 79 124 89
Output rpm 1,900 -- -- -- --
Gas generator rpm 38,100 -- -- -- --
Takeoff (5 min.) at sea level
Equivalent shaft hp 502 528 632 725 736
Shaft hp. 475 500 600 675 700
Jet thrust, lb. 68 70 79 124 89
Output rpm 1,900 -- -- -- --
Gas generator rpm 38,100 -- -- -- --
TCDS E4EA PAGE 5

I. MODELS (cont.) PT6A-110 PT6A-112 PT6A-114 PT6A-114A PT6A-116

Maximum reverse
Shaft hp. 455 475 600 675 672
Output rpm (max) 1,825 -- -- -- --

Output Shaft Flanged -- -- -- --

4.250" B.C., 8
holes .594+
.005: diameter
(See PWC
Installation
Drawing
FUEL (See NOTE 8) Fuels con- -- -- -- --
forming to
P&WC Spec.
CPW204 &
CPW46.
OIL See NOTE 9 -- -- -- --
OIL TANK CAPACITY, gal. 2.3 -- -- -- --
USABLE OIL TANK CAPACITY, 1.5 -- -- -- --
gal.
PRINCIPAL DIMENSIONS, in.
Length, in. 61.89 -- 61.89 --
Nominal diameter 18.29 -- 18.29 18.06
Maximum radius 11.50 -- 11.73 11.50
(excluding exhaust ports)
WEIGHT (DRY) 343 -- 359 360 348
(includes basic engine, fuel
and ignition systems but ex-
cludes propeller governor (-6, -20,
and PT6D-114A models only) and
ignition power source)
CENTER OF GRAVITY
(dry weight) (in.)

Forward of mount plane 3.80 -- 3.88 -- 3.87

Aft of forward mount plane --- --- --- -- ---

Below engine centerline 0.26 -- -- -- 0.25

Right of engine centerline 0.34 -- 0.38 -- 0.35

PT6A-121 PT6A-135,- PT6D-114A PT6A-35

135A
REDUCTION GEAR RATIO .0576:1 -- .1875 .0663:1
RATINGS

Maximum continuous at sea level

Equivalent shaft hp. 647 787 729 787
Shaft hp. 615 750 680 750
Jet thrust, lb. 80 93 124 93
Output rpm 1,900 -- 6,188 2,190
Gas generator rpm 38,100 -- 38,100 --
Takeoff (5 min.) at sea level
Equivalent shaft hp. 647 787 729 787
Shaft hp. 615 750 680 750
Jet thrust, lb. 80 93 124 93
Output rpm 1,900 -- 6,188 2,190
Gas generator rpm 38,100 -- -- --
TCDS E4EA PAGE 6

I. MODELS (cont.) PT6A-121 PT6A-135, PT6D-114A PT6A-35

-135A
Maximum reverse
Shaft hp. 591 720 680 720
Output rpm (max) 1,825 -- 5,940 2,100

Output Shaft Flanged 4.250" -- -- --

B.C., 8 holes .594
+ .005" diameter
(See PWC
Installation
Drawing
FUEL (See NOTE 8) Fuels con- -- -- --
forming to P&WC
Spec. CPW204 &
CPW46.
OIL See NOTE 9 -- -- --
OIL TANK CAPACITY, gal. 2.3 -- -- --
USABLE OIL TANK CAPACITY, 1.5 -- -- --
gal.
PRINCIPAL DIMENSIONS, in.
Length 61.89 -- 52.8 61.89
Nominal diameter 18.29 -- 18.29 --
Maximum radius 11.50 -- 11.73 --
(excluding exhaust ports)
WEIGHT (DRY) 343 347 297 334
(includes basic engine, fuel and
ignition systems but excludes
propeller governor (-6, -20 and
PT6D-114A models only) and
ignition power source)
CENTER OF GRAVITY
(dry weight) (in.)

Forward of mount plane 3.8 3.87 0.19 3.87

Aft of forward mount plane --- --- --- ---

Below engine centerline 0.26 0.25 0.31 0.25

Right of engine centerline 0.34 0.35 0.25 0.35

PT6A-38 PT6A-40 PT6A-41, PT6A-45 PT6A-45A,

-41AG, -42 -45B
-42A
REDUCTION GEAR RATIO .0663:1 -- -- .0568:1 --
RATINGS

Maximum continuous at sea level

Equivalent shaft hp. 801 749 903 1,070 --
Shaft hp. 750 700 850 1,020 --
Jet thrust, lb. 127 122 134 127 --
Output rpm 2,000 -- -- 1,700 --
Gas generator rpm 38,100 39,000 38,100 38,100 39,000
Takeoff (5 min.) at sea level
Equivalent shaft hp. 801 749 903 1,174 1,229
Shaft hp. 750 700 850 1,120 1,173
Jet thrust, lb. 127 122 134 136 --
140(-45B)
Output rpm 2,000 -- -- 1,700 --
Gas generator rpm 38,100 39,000 38,100 38,100 39,000
TCDS E4EA PAGE 7

II. MODELS PT6A-38 PT6A-40 PT6A-41, PT6A-45 PT6A-45A, -

-41AG -42, 45B
-42A
Maximum reverse
Shaft hp. 700 -- 800 900 --
Output rpm (max) 1,900 -- -- 1,650 --

Output Shaft Flanged -- -- -- --

4.250” B.C., 8
holes .594 +
.005” diameter
(See PWC
Installation
Drawing)
FUELS (See NOTE 8) Fuels con- -- -- -- --
forming to
PWC Spec.
CPW204 &
CPW46. For
PT6-AG
engines
CPW381 also.
OIL See NOTE 9 -- -- -- --
OIL TANK CAPACITY, gal. 2.5 -- -- -- --
USABLE OIL TANK CAPACITY, 1.5 -- -- -- --
gal.
PRINCIPAL DIMENSIONS, in.
Length 66.47 -- -- 72.62 --
Nominal diameter 18.29 -- -- -- --
Maximum radius 12.84 -- -- -- --
(excluding exhaust ports)
WEIGHT (DRY) 405 419 -- 445 --
(includes basic engine, fuel
and ignition systems but ex-
cludes propeller governor (-6, -20
and PT6D-114A models only) and
ignition power source)
CENTER OF GRAVITY
(dry weight)(in.)

Forward of mount plane 2.49 -- -- 5.38 5.38

Aft of forward mount plane --- --- --- --- ---

Below engine centerline 0.32 -- -- 0.12 0.12

Right of engine centerline 0.19 -- -- 0.27 0.27

TCDS E4EA PAGE 8

II. MODELS PT6A-45R PT6A-50 PT6A-60, PT6A-61, PT6A-60AG PT6A-52

-60A -61A
REDUCTION GEAR RATIO .0568:1 .0438:1 .0568:1 .0663:1 .0663:1
RATINGS
Maximum continuous at sea level
Equivalent shaft hp. 1,070 1,022 1,113 902 1,081 898
Shaft hp. 1,020 973 1,050 850 1,020 850
Jet thrust, lb. 127 124 157 132 154 120
Output rpm 1,700 1,210 1,700 2,000 1,700 2000
Gas generator rpm 39,000 38,100 39,000 -- -- --
Takeoff (5 min.) at sea level
Equivalent shaft hp. 1,254 1,174 1,113 902 1,113 898
Shaft hp. 1,197 1,120 1,050 850 1,050 850
Jet thrust, lb. 141 136 157 132 157 120
Output rpm 1,700 1,210 1,700 2,000 1,700 2000
Gas generator rpm 39,000 38,500 39,000 -- -- --

Maximum reverse
Shaft hp. 900 1,120 900 800 900 800
Output rpm (max) 1,650 1,210 1,650 1,900 1,650 1900

Output Shaft Flanged 4.250" Flanged 5.125" Flanged 4.250" -- -- Flanged 4.250"
B.C., 8 holes B.C., 8 holes B.C., 8 holes B.C., 8 holes
.594 + .005" .594 + .005" .594 + .005" .594 + .005"
diameter (See diameter (See diameter (See diameter (See
PWC PWC PWC PWC
Installation Installation Installation Installation
Drawing Drawing) Drawing) Drawing)
FUEL (See NOTE 8) Fuels con- -- -- -- -- See PWC SB
forming to 13044 for
P&WC Spec. approved fuel
CPW204 & types.
CPW 46. For
PT6-AG
engines
CPW381 also.
OIL See NOTE 9 -- -- -- -- --
OIL TANK CAPACITY, gal. 2.5 3.0 2.5 -- -- --
USABLE OIL TANK CAPACITY, 1.5 1.0 1.5 -- -- --
gal.
PRINCIPAL DIMENSIONS, in.
Length 72.62 79.89 72.09 66.76 72.09 66.76
Nominal diameter 18.29 -- 18.29 -- -- --
Maximum radius 12.84 15.44 12.84 -- -- --
(excluding exhaust ports)
WEIGHT (DRY) 459 622 487 443 489 449
(includes basic engine, fuel
and ignition systems but ex-
cludes propeller governor (-6, -20,
and PT6D-114A models only) and
ignition power source)
TCDS E4EA PAGE 9

II. MODELS (continued) PT6A-45R PT6A-50 PT6A-60, PT6A-61, PT6A-60AG PT6A-52

-60A -61A
CENTER OF GRAVITY
(dry weight) (in.)
Forward of mount plane 5.38 --- 5.22 2.630 5.22 2.51

Aft of forward mount plane --- See NOTE 17 --- --- --- ---

Below engine centerline 0.12 See NOTE 17 .300 -- -- .260

Right of engine centerline 0.27 See NOTE 17 .28 .29 .28 .330

III. MODELS PT6A-65B PT6A-65R PT6A-65AR PT6A-65AG

REDUCTION GEAR RATIO .0568:1 -- -- --
RATINGS

Maximum continuous at sea level

Equivalent shaft hp. 1,249 -- 1,298 --
Shaft hp. 1,173 -- 1,220 --
Jet thrust, lb. 189 -- 194 --
Output rpm 1,700 -- -- --
Gas generator rpm 39,000 -- -- --
Takeoff (5 min.) at sea level
Equivalent shaft hp. 1,249 1,459 1,509 1,381
Shaft hp. 1,173 1,376 1,424 1,300
Jet thrust, lb. 189 209 214 202
Output rpm 1,700 -- -- --
Gas generator rpm 39,000 -- -- --
Alternative takeoff
(5 min. at sea level)
Equivalent shaft hp. --- 1,308 -- ---
Shaft hp. --- 1,230 -- ---
Jet thrust, lb. --- 195 -- ---
Output rpm --- 1,700 -- ---
Gas generator rpm --- 39,000 -- ---
Maximum reverse
Shaft hp. 900 -- -- --
Output rpm (max) 1,650 -- -- --

Output Shaft Flanged 4.250" -- -- --

B.C., 8 holes .594
+ .005" diameter
(See PWC
Installation
Drawing)
FUEL (See NOTE 8) Fuels con- -- -- --
forming to P&WC
Spec. CPW204 &
CPW46. For PT6-
AG engine
CPW381 also.
OIL See NOTE 9 -- -- --
OIL TANK CAPACITY, gal. 2.5 -- -- --
USABLE OIL TANK CAPACITY, 1.5 -- -- --
gal.
PRINCIPAL DIMENSIONS, in.
Length 74.79 -- -- --
Nominal diameter 18.29 -- -- --
Maximum radius 12.84 -- -- --
TCDS E4EA PAGE 10

III. MODELS (continued) PT6A-65B PT6A-65R PT6A-65AR PT6A-65ag

WEIGHT (DRY) 495 496 501 --
(includes basic engine, fuel
and ignition systems but excludes
propeller governor (-6,-20, and
PT6D-114A models only) and
ignition power source)
CENTER OF GRAVITY
(dry weight) (in.)

Forward of mount plane 3.75 -- -- --

Aft of forward mount plane --- --- --- ---

Below engine centerline .29 -- -- --

Right of engine centerline .17 -- -- --

IV. MODELS PT6B-9 PT6B-35F

REDUCTION GEAR RATIO .1889:1 .1875:1
RATINGS

Maximum continuous at sea level

Equivalent shaft hp. --- 684
Shaft hp. 500 650
Jet thrust, lb. 124 ---
Output rpm 6,230 6,188
Gas generator rpm 38,100 --
Takeoff (5 min.) at sea level
Equivalent shaft hp. --- 684
Shaft hp. 550 650
Jet thrust, lb. 136 ---
Output rpm 6,230 6,188
Gas generator rpm 38,100 --

Maximum reverse
Shaft hp. --- ---
Output rpm (max) --- ---
OUTPUT SHAFT SAE Aero Std. 84d 36 teeth, 1.5 in. P.D.
Spline 1.5 in P.D. See Installation Manual
FUEL (See NOTE 8) Fuels conforming --
to P&WC Spec.
CPW204 &
CPW46.
OIL See NOTE 9 --
OIL TANK CAPACITY, gal. 2.3 --
USABLE OIL TANK CAPACITY, 1.5 --
gal.
PRINCIPAL DIMENSIONS, in.
Length 58.68 --
Nominal diameter 18.06 --
Maximum radius 10.85 12.6
(excluding exhaust ports)
WEIGHT (DRY) 255 305
(includes basic engine, fuel
and ignition systems but ex-
cludes propeller governor (-6,-20,
and PT6A-114A models only) and
ignition power source)
TCDS E4EA PAGE 11

IV. MODELS (continued) PT6B-9 PT6B-35F

CENTER OF GRAVITY
(dry weight) (in.)

Forward of mount plane --- ---

Aft of forward mount plane 22.08 23.56 RH/23.3

LH*
Below engine centerline 0.13 .52 RH/.63 LH

Right of engine centerline 0.52 .16 RH/.15 LH

CERTIFICATION BASIS Applicable to the following engines and serial numbers: FAR 21.29, CAR 13. (Except
Serial numbers shown below which were certified under FAR 21.21, FAR 33-5 NOTE 19)
DATE TYPE CERTIFICATE
MODEL S/N DATE OF APPLICATION NO. E4EA ISSUED/REVISED

PT6A-6 All June 4, 1962 December 31, 1963

PT6A-6A All April 6, 1965 May 28, 1965
PT6A-6B All November 30, 1967 December 20, 1967
PT6B-9 All June 4, 1962 May 28, 1965
PT6A-11 All August 19, 1977 September 16, 1977
PT6A-11AG All January 10, 1979 May 17, 1979
PT6A-15AG All January 9, 1978 January 27, 1978
PT6A-20 All April 9, 1965 October 29, 1965
PT6A-20A All except 024103-024160 February 19, 1973 March 9, 1973
PT6A-20B All August 20, 1973 October 2, 1973
PT6A-6/C20 All February 19, 1973 March 9, 1973
PT6A-21 All December 2, 1974 December 10, 1974
PT6A-25 All except 058013-058018 May 5, 1976 May 6, 1976
058025-058040
058042-058047
058049-058055
058059-058064
058068-058073
058077-058084
058089-058204
PT6A-25A All December 13, 1976 December 28, 1976
PT6A-25C All March 5, 1990 June 8, 1990
PT6A-27 All except 044878-040879 November 15, 1966 December 20, 1967
040883-040884
040894-040895
040899-040921
040929-040934
040937-040943
040946-040949
040982-040988
040993-040999
041006-041007
041015-041021
041027-041032
041036
041041-041044
041050-041053
041060-041063
041067-041098
041105-041110
041113-041146
041152-041156
041162-041175
041180-041194
041199-041201
TCDS E4EA PAGE 12

PT6A-28 All except 050676-050925 January 27, 1969 March 11, 1969
050928-050934
PT6A-29 All October 6, 1967 October 28, 1968
PT6A-34 All except 056071-056075 April 29, 1971 November 11, 1971
056080-056081
056086-056090
056098-056107
PT6A-34B 054011, 054012 only July 20, 1976 August 4, 1976
prior to 054007
PT6A-34AG All February 3, 1977 February 14, 1977
PT6A-35 All October 24, 2001 May 29, 2002
PT6B-35F All August 10, 1979 March 26, 1982
PT6A-36 All December 13, 1973 December 13, 1973
PT6A-38 079156, 079157 only May 12, 1975 May 30, 1975
prior to 079153
PT6A-40 All April 19, 1983 July 13, 1983
PT6A-41 All August 30, 1973 October 2, 1973
PT6A-41AG All December 21, 1978 May 17, 1979
PT6A-42 All July 11, 1979 October 12, 1979
PT6A-42A All September 21, 1998 December 4, 1998
PT6A-45 All May 12, 1975 May 30, 1975
PT6A-45A All March 25, 1976 April 22, 1976
PT6A-45B All March 2, 1979 March 29, 1979
PT6A-45R All June 25, 1980 August 1, 1980
PT6A-50 All September 21, 1976 October 22, 1976
PT6A-60 All April 20, 1982 March 15, 1983
PT6A-60A All April 19, 1983 November 7, 1983
PT6A-60AG All October 1, 1996 October 10, 1996
PT6A-61 All April 20, 1982 March 15, 1983
PT6A-61A All January 6, 1984 May 1, 1985
PT6A-65B All April 20, 1982 September 17, 1982
PT6A-65R All April 20, 1982 September 17, 1982
PT6A-65AR All January 6, 1984 May 1, 1985
PT6A-65AG All July 23, 1987 August 19, 1987
PT6A-110 All August 8, 1980 February 15, 1981
PT6A-112 All October 12, 1978 October 30, 1978
PT6A-114 All December 21, 1982 May 21, 1984
PT6A-114A All October 4, 1989 March 19, 1990
PT6A-116 All October 4, 1984 May 1, 1985
PT6A-121 All April 12, 1982 August 3, 1982
PT6A-135 All September 9, 1977 September 12, 1977
PT6A-135A All February 3, 1982 April 29, 1982
PT6D-114A All October 30, 1996 September 22, 1997
PT6A-52 All May 26, 2006 May 31, 2007

IMPORT
REQUIREMENTS:

To be considered eligible for installation on U.S. registered aircraft, each engine to be exported to the United States shall be
accompanied by a Certificate of Airworthiness for export or certifying statement endorsed by the exporting cognizant civil
airworthiness authority which contains the following language:

(1) This engine conforms to its United States type design (Type Certificate Number E4EA) and is in a condition for
safe operation.
(2) This engine has been subjected by the manufacturer to a final operational check and is in a proper state of
airworthiness.

Reference FAR Section 21.500, which provides for the airworthiness acceptance of aircraft engines or propellers manufactured
outside of the U.S. for which a U.S. type certificate has been issued.

Additional guidance is contained in FAA Advisory Circular 21.23, Airworthiness Certification of Civil Aircraft, Engines, Propellers
and Related Products, Imported into the United States.
TCDS E4EA PAGE 13

NOTES

NOTE 1. Maximum permissible temperatures:

PT6A-20, -20A, -20B, -6/C20
PT6A-6, -6A, -6B, PT6A-28, -29 PT6B-9 PT6A-11, -11AG
Measured Rated Turbine Measured Rated Inter-Turbine --
Temperature as Indicated by the Temperature as Indicated by the
Average of 24 Gas Temp. Average of 8 or 10 Gas Temp.
Thermocouples Thermocouples
Takeoff 1821oF (994oC) 1382oF (750oC) 1292oF (700oC)
1382ºF(750ºC)
(PT6A-20,-20A,-20B,-6/C20)
Maximum Continuous 1745oF (952oC) 1382oF (750oC) 1292oF (700oC)
1382ºF(750ºC) 1319oF (715oC) (PT6B)
(PT6A-20,-20A,-20B,-6/C20)
Starting Transient 1900oF (1038oC) 1994oF (1090oC) --
(2 sec.) 1994ºF(1090ºC)
(PT6A-20,-20A,-20B,-6/C20)

PT6A-21 PT6A-25, -25A PT6A-15AG, -27, -112, -121

Measured Rated Inter-Turbine -- --
Temperature as Indicated by the
Average of 8 or 10 Gas Temp.
Thermocouples
Takeoff 1283oF (695oC) 1283oF (695oC) 1336oF (725oC)
Maximum Continuous 1283oF (695oC) 1283oF (695oC) 1336oF (725oC)
Starting Transient 1994oF (1090oC) -- 1994oF (1090oC)
(2 sec.)

PT6A-34, -34B, -34AG, -25C PT6A-35,-36,-114,-114A,- PT6A-110

116,-135,-135A,-PT6B-
35F,PT6D-114A
Measured Rated Inter-Turbine Measured Rated Inter- --
Temperature as Indicated by the Turbine Temperature as
Average 8 or 10 Gas Temp. Indicated by the Average of
Thermocouples 8 Gas Temp. Thermocouples
Takeoff 1454oF (790oC) 1481oF (805oC) 1265oF (685oC)
Maximum Continuous 1454oF (790oC) 1481oF (805oC) 1265oF (685oC)

Starting Transient 1994oF (1090oC) -- --

(2 sec.)

PT6A-42, -42A,
PT6A-38 PT6A-41, -41AG PT6A-45 -45A,-45B, -50, -40
Measured Rated Inter- -- -- --
Turbine Temperature as (8 or 10)
Indicated by the Average of 8
Gas Temp. Thermocouples
Takeoff 1301oF (705oC) 1382oF (750oC) 1400oF (760oC) 1472oF (800oC)
Maximum Continuous 1301oF (705oC) 1382oF (750oC) 1400oF (760oC) 1472oF (800oC)
Starting Transient 1832oF (1000oC) -- -- --
(5 sec.)
Alternate Takeoff --- --- --- ---
TCDS E4EA PAGE 14

NOTE 1.(continued) PT6A-45R PT6A-60 PT6A-61 PT6A-60A, -61A, -60AG,

-52
Measured Rated Inter- Measured Rated Inter- -- --
Turbine Temperature as Turbine Temperature as
Indicated by the Average Indicated by the Average
of 8 Gas Temp. of 8 or 10 Gas Temp.
Thermocouples Thermocouples
Takeoff 1553oF (845oC) 1472ºF (800ºC) -- 1508ºF(820ºC)
Maximum Continuous 1494oF (812oC) 1472oF (800oC) -- 1508oF (820oC)
1472ºF(775ºC)(-60AG)
Starting Transient (5 sec.) 1832oF (1000oC) -- -- --
Alternate Takeoff 1472oF (800oC) --- --- ---

PT6A-65B PT6A-65R PT6A-65AR PT6A-65AG

Measured Rated Inter- -- -- --
Turbine Temperature as
Indicated by the
Average of 8 or 10 Gas
Temp. Thermocouples
Takeoff 1508ºF(820ºC) 1553ºF(845ºC) 1571oF (855oC) 1508oF (820oC
Maximum Continuous 1490oF (810oC) 1539oF (835oC) 1544oF (840oC) 1508oF (820oC)
Starting Transient 1832oF (1000oC) -- -- --
Alternate Takeoff --- 1490oF (810oC) 1508oF (820oC) ---

All except:PT6A-40,-41,-42,-42A,-45,-45A,-45B,-45R,-60, -60A,-60AG,-61,-61A,-65AG,-65AR,-65B, and -65R models, Oil

Temperature Continuous minus 40oF (-40oC) to 210oF (99oC) except for MIL-L-7808 (where approved; See NOTE 9) for which
the maximum allowable temperature is 185oF (85oC). Limited periods of 10 minutes of 220oF (104oC) are allowable, except on A-
25, A-25A, A-25C, A-11 and A-11AG (5 minute maximum), and A-50 (15 minutes maximum).

PT6A-40,-41,-42,-42A, and -61A, Oil Temperature Continuous minus 40ºF(-40ºC) to 220ºF(104ºC). Maximum ground operation
230ºF(110ºC).

PT6A-45,-45A,-45B,-45R,-52, -60,-60A,-60AG, -61, -65AG,-65AR,-65B,-65R, Oil Temperature Continuous minus 40ºF(-40ºC)

to 230ºF(110ºC).

Fuel temperature maximum fuel pump inlet of 135oF (57oC). Fuel temperature minimum fuel pump inlet of -65oF (-54oC) or 12
centistokes.

NOTE 2. Fuel and Oil Pressure Limits:

Fuel: Minimum pressure at inlet to the engine fuel system shall not be less than 5 p.s.i. above true vapor pressure
of the fuel. For emergency operation, with airframe boost pump inoperative, it must be such that vapor liquid
ratio does not exceed 0.1 for continuous operation and does not exceed 0.3 for more than 10 hours in a pump
overhaul life.

Oil: Operating range

PT6A-6, -6A, -6B, -20, -20A, -20B, -6/C20, PT6B-9
28000 rpm gas generator speed and above: 65-85 p.s.i.g., 80 (max. B-9)
Below 28000 rpm gas generator speed: 40 p.s.i.g. (min.)

PT6A-11, -11AG, -15AG, -21, -27, -28, -29, -50, -110, -112, -121
27000 rpm gas generator speed and above, with an oil temperature of
140-158oF: 80-100 p.s.i.g.
Below 27000 rpm gas generator speed: 40 p.s.i.g. (min) 60 (-50)
TCDS E4EA PAGE 15

NOTE 2. Oil: Operating range

(Cont.)
PT6A-25, -25A, -25C
27000 rpm gas generator speed and above, with an oil temperature of
140-160oF: 65-85 p.s.i.g. (75-95(A-25C)
Below 27000 rpm gas generator speed: 40 p.s.i.g. (min)

PT6A-34, -34B, -34AG, -35,-135, -135A, -36, -114, -114A, -116,

PT6B-35F, PT6D-114A
27000 rpm gas generator speed and above, with an oil temperature of
140-158oF: 85-105 p.s.i.g. (75-100(B-35F))
Below 27000 rpm gas generator speed: 40 p.s.i.g. (min)

PT6A-38, -40, -41, -41AG, -42, -42A

27000 rpm gas generator speed and above, with an oil temperature of
140-160oF: 85-135 p.s.i.g. (PT6A-38)
105-135 p.s.i.g. (PT6A-41, -41AG)
100-135 p.s.i.g. (PT6A-40, -42, -42A)
Below 27000 rpm gas generator speed: 60 p.s.i.g. (min)

PT6A-45, -45A, -45B, -45R,-52, -60, -61, -65B, -65R, -60A, -

60AG, -61A, -65AR, -65AG
27000 rpm gas generator speed and above, with an oil temperature of 90-135 p.s.i.g.
140-160oF:
Below 27000 rpm gas generator speed: 60 p.s.i.g. (min)

NOTE 3. The engine ratings are based on static sea level condition 29.92 in Hg pressure, compressor intake screen
installed, no external accessory loads and no airbleed. These ratings are available up to the following
compressor inlet air (dry) temperatures.

Maximum Maximum
Continuous Takeoff Continuous Takeoff
PT6A-6, -6A, - 64oF 70oF PT6A-45R 92oF 73, 52(1)oF
6B
PT6A-20, -20A, 70 70 PT6A-50 90 59, 93(2)
-20B, -6/C20
PT6A-11, - 108 108 PT6A-60, -60A 77 77
PT6A-11AG 90 90
PT6A-21 91 91 PT6A-60AG 63 79
PT6A-25, -25A 93 93 PT6A-61, -61A 115 115
PT6A-25C 87 87
PT6A-15AG, - 71 71 PT6A-65B 101 101
27
PT6A-28 70 70 PT6A-65R 101 82, 76(1)
PT6A-29 73 73 PT6A-65AR 101 82, 84(1)
PT6A-34, -34B, 86 86 PT6A-65AG 101 71
-34AG
PT6A-35,-135A 93 93
PT6A-36 97 97 PT6A-110 101 101
PT6A-38 102 102 PT6A-112 133 133
PT6A-40 135 135 PT6A-114 136 136
PT6A-41, - 106(86, -42A) 106 PT6A-114A 115 115
41AG, -42, -
42A
TCDS E4EA PAGE 16

Maximum Takeoff Maximum

Continuous Continuous Takeoff
PT6A-45 79 59 PT6A-116 105 105
PT6A-45A 79 46 PT6A-121 91 91
PT6A-45B 84 52 PT6A-135 85 85
PT6B-9 72 77
PT6B-35F 110 110
PT6D-114A 104 104
PT6A-52 142 142
1 Alternative Takeoff
2. Takeoff with Augmentation Fluid

NOTE 4. Accessory Drive Provisions: (All Models except -50)

The following accessory drive provisions are available and are included in the basic engine weight.
Maximum
Driven by Gas Rotating Facing Speed Ratio Maximum Torque Overhang
Generator Turbine Drive Pad (to Turbine) Continuous Static (in. - lbs.)
Tachometer, CC 0.112 7 100 10
Accessory
Gearbox
Starter and/or C 0.293 170 1600 150
Generator 250 (38, 40, 41, 42,
42A,45, 45A, 45B, 45R,
52, 60, 60A, 60AG, 61,
61A, 65B, 65R, 65AR,
65AG, 114, 114A, B-
35F, D-114A)
Vacuum Pump CC 0.103 60 800 25

Hydraulic Pump CC 0.203 150 800 25

Aircraft Accessory C 0.321 135 800 25
Drive

Maximum
Driven by Rotating Facing Speed Ratio Maximum Torque Overhang
Power Turbine Drive Pad (to Turbine) Continuous Static (in. - lbs.)
TCDS E4EA PAGE 17

Tachometer C 0.1264(PT6A-15AG, 7 100 10

(Tachometer and -25C,-27,-28,-29,-34,-
overspeed 34B,-34AG,-35,-36,-
governor for 38,-40,-41,-41AG,-
PT6A-6,-6A,-6B 42,-42A,-52, -61,-
and-20 only) 61A)
0.1263 (B-35F);
0.1273(PT6A-6,-6A,-
6B,-11,-11AG,-20,-
20A,-20B,-6/C20,-21,-
25,-25A,-110,-112
114, 114A, -116, 121,-
135,-135A);
0.1405 (45, 45A, 45B,
45R, 60, 60A, 60AG,
65B, 65R, 65AR,
65AG)

NOTE 4. (Cont'd)
Driven by Power Rotating Facing Speed Ratio Maximum Torque Maximum
Turbine Drive Pad (to Turbine) Continuous Static Overhang
(in. - lbs.)
Propeller Governor C 0.1264(PT6A-15AG, 50 850 25
and Overspeed -25C,-27,-28,-29,-34,-34B,-
Governor* 34AG,-35,-36,-38,-40,-41,-
41AG,-42,-42A,-52,-61,-61A)
0.1273(PT6A-6,-6A,-6B,-11,-
11AG,-20,-20A,-20B,-6/C20,-
21,-25,-25A,-110,-112
114, 114A, -116, 121,-135,-
135A);
0.1405(PT6A-45, 45A, 45B,
45R, 60, 60A, 60AG, 65B,
65R, 65AR, 65AG)
* May be an optional drive, which is not included in the basic engine weight, is included.
The hydraulic pump drive requires the aircraft accessory drive to complete the train.

Cabin pressurization may be provided by the approved combination of the Beech Aircraft Corporation
Gearbox No. 50-9903 with the Godfrey Engineering type 9 cabin supercharger, mounted directly on the
accessories gearbox.

PT6A-38,-40,-41,-41AG,-42,-42A are approved for operation with an accessory mounted on the reduction
gearbox and belt driven from the propeller assembly provided that the accessory is mounted and driven in
accordance with the location dimensions and weight prescribed in Sheet 5 of Drawing Number 3018500,
revision dated August 20, 1973.

C = Clockwise
CC = Counterclockwise
TCDS E4EA PAGE 18

Accessory Drive Provisions: (PT6A-50 only)

Maximum
Driven by Gas Rotating Facing Speed Ratio Maximum Torque Overhang
Generator Turbine Drive Pad (to Turbine) Continuous Static (in. - lbs.)
Tachometer CC 0.112 7 100 10
Accessory Gearbox
Starter and/or C 0.293 170 1600 230
Generator
Hydraulic Pump* CC 0.204 150 800 30

Driven by
Power Turbine
Tachometer CC 0.1400 7 100 10
Alternator C 0.529 120 1600 105
Prop. Governor CC 0.1400 100 1700 40
Prop. Overspeed CC 0.1400 50 850 25
Governor
TCDS E4EA PAGE 19

NOTE 5. External airbleed shall not exceed 5.25%, except as specified in specific installation manuals. A maximum of 1.5
lbs. Per minute may be bled during starting. Bleed air meets the requirements of Paragraph 3.18 of MIL-E-5007C.

NOTE 6. Maximum Allowable Torque:

The Maximum allowable steady state and acceleration torque, as measured by the torquemeter, are:

Model Continuous lb. Ft. Transient

Acceleration lb. Ft.
PT6A-11, 11AG 1194 1500
PT6A-6, 6A, 6B, 20, 20A, 20B, 1315 1500
6/C20, 21
25, 25A
PT6A-15AG, 27 1628 2100
PT6A-28 1786 2100
PT6A-29, 34, 34B, 34AG, 35, 36, 1970 2100
25C
PT6A-38 1970 2750
PT6A-40 2230 2750
PT6A-41, 41AG, 42, 42A 2230 2750
PT6A-45, 45A, 45B 3625 5100
PT6A-45R 3625 5100
PT6A-50 4860 5900
PT6A-135, 135A 2080 2400
PT6B-9 464 ---
PT6A-112 1480 1900
PT6A-110 1313 1700
PT6A-60, 60A, 60AG 3625 5100
PT6A-61, 61A 2230 2750
PT6A-65B 3625 5100
PT6A-65R 4250 (3800 Alternative Takeoff 5100
PT6A-114, 114A 1980 2400
PT6A-121 1710 2200
PT6B-35F 570 658
PT6A-65AR 4400(3800 Alternative Takeoff) 5100
PT6A-116 1940 2400
PT6A-65AG 3800 5100
PT6D-114A 610 740
PT6A-52 2230 2750
TCDS E4EA PAGE 20

NOTE 7. The maximum output shaft overspeed limit is 110 percent (except 100% for PT6A-38, 41, 41AG, 42 and 42A
only) at all ratings and may be employed for sustained periods in emergencies. The normal steady state output
shaft operating limit speeds are defined as 2200 rpm (100%) for the PT6A-6, 6A, 6B, 6/C20, 11, 11AG, -15AG, -
20, -20A, -20B, -21, -25, -25A, -25C, -27, -28, -29, -34, -34B, -34AG, -36, 2190 rpm (99.6%) for the PT6A-35,
2000 rpm (90.7%) for the PT6A-38, -40, -41, -41AG, -42, -42A, -52, -61, and -61A, 1900 rpm (100%) for the
PT6A-45,-45A,-45B,-45R,-65B,-65R,-60,-60A,-60AG,-65AR,-65AG, -135, 135A, 110, 112, 114, 114A, 121,
and 116, 1210 rpm (100%) for the PT6A-50, 6230 rpm (100%) for the PT6B-9 and 6188 rpm (100%) for the
PT6B-35F and PT6D-114A and is the normal steady state operating limit. The normal steady state operating limit
speed rises linearly as power is decreased, reaching a maximum of 105% at idle power for the PT6B-9.

100% gas generator speed is defined as 37,468 rpm. Unlimited and limited gas generator speeds are:

Model Unlimited Speed, rpm Limited Speed, rpm Duration

PT6A-6,-6A,-6B,-11,-11AG,- 38,100 (101.7%) 38,500 (102.8%) 10 Sec
20,-20A,-20B,-6/C20,-21,-
25,-25A,-25C,-27,-28,-29,-
34,-34B,-34AG,-36,-38,-41
PT6A-35,-110,-112,-114,- 38,100 (101.7%) 38,500 (102.8%) 2 Sec
114A,-116,-121,-135,-
135A,PT6D-114A
PT6A-50 38,500 (102.8%) --- ---
PT6A-40,-42,-42A 38,100 (101.7%) 39,000 (104.1%) 10 Sec
PT6A-45,-45A,-45B,-45R,- 39,000 (104.1%) --- ---
52, -60,-60A,-60AG,-61,-
61A,-62,-65B,-65R,-65AR,-
65AG

NOTE 8. Emergency use of MIL-G-5572, Grades 80/07, 91/98, 100/130 and 115/145 is permitted for a total time period
not exceeding 150 hours during any overhaul period. It is not necessary to purge the unused fuel from the system
when switching fuel type.

NOTE 9. The following oils are eligible for these engines: PWC PT6 Engine Service Bulletin Nos. 1001, 1601, 3001,
4001, 12001 and 13001 list approved brand oils.

NOTE 10. These engines meet FAA requirements for operation in icing conditions when the intake system conforms with
the PWC Installation Manual instruction for inertial separation of snow and icing particles; when the alternative
approved alcohol system is used, flight in visible moisture is restricted as specified in the PWC Installation
Manual. These engines also meet FAA requirements for adequate disk integrity and rotor blade containment and
do not require external armoring.

NOTE 11. For reversing application the PT6A-6A and PT6A-20 engines must be equipped with Woodward Propeller
Governor Type X210XXX.

NOTE 12. Fuel controls approved for each engine model are listed in the applicable Parts Catalog.

NOTE 13. The above models incorporate the following characteristics:

Model Characteristics

PT6A-6 Basic model

PT6A-6A Incorporates provisions for reversing propeller.

PT6A-6B Incorporates provisions for reversing propeller, PT6A-20 mechanism.

PT6B-9 Single stage reduction gearing. (Output shaft speed 6,230 r.p.m.)
PT6A-20 Maximum continuous rating equal to takeoff. Provisions for reversing.
PT6A-20A Similar to PT6A-20 except for exhaust port configuration and optional propeller reversing
system.
PT6A-20B Similar to PT6A-20 except for optional propeller reversing system.
PT6A-11 Similar to PT6A-21 except derated.
TCDS E4EA PAGE 21

NOTE 13. Model Characteristics

(Cont.)
PT6A-11AG Similar to PT6A-11, intended for agricultural aviation. Permissible rotor component lives,
overhaul, inspection intervals and fuel requirements are listed in PWC Engine Service Bulletin
Nos. 12102, 12103, and12144 respectively.
PT6A-15AG Similar to PT6A-27, intended for agricultural aviation. Permissible rotor component lives,
overhaul inspection intervals and fuel requirements are listed in PWC Engine Service Bulletin
Nos. 12102, 12103, and 12144 respectively.
PT6A-6/C20 Similar to PT6A-20 except this configuration previously PT6A-6 converted to PT6A-20 by
service bulletin.
PT6A-21 Similar to PT6A-27 except derated.
PT6A-25 Similar to PT6A-27 except for modifications required for inverted flight optional torque
controller, and aluminum alloy castings.
PT6A-25A Similar to PT6A-25 except for magnesium alloy major castings in place of aluminum
alloy.
PT6A-25C Similar to PT6A-25A except for A-34 hot section; T-3B first stage compressor blades and long
inducer propeller; A-100 large bore reduction gears; and A-25A installation features. Ratings
and limits are the same as the A-34.
PT6A-27 Features higher ratings, revised engine parts and integrated propeller reversing control.
PT6A-28 Similar to PT6A-27 except for higher inter-turbine temperature limit.
PT6A-29 Features higher ratings, revised first stage reduction gearing.
PT6A-34 Similar to PT6A-27 except incorporates a compressor turbine similar to PT6T-3 for higher
ratings.
PT6A-34B Similar to PT6A-34, except for aluminum alloy major castings in place of magnesium alloy.
PT6A-34AG Similar to PT6A-34, intended for agricultural aviation. Permissible rotor component lives,
overhaul, inspection intervals and fuel requirements are listed in P&WACL Engine Service
Bulletin Nos. 1302, 1303, and 1344 respectively.
PT6A-35 Similar to PT6A-135 but incorporating the reduction gearbox of the PT6A-34.
PT6A-36 Similar to PT6A-34 except for increased turbine inlet temperature limits.
PT6A-38 Similar to PT6A-41 except derated.
PT6A-40 Similar to PT6A-42 except for increased flat rating and manual fuel control override.
PT6A-41 Features an enlarged compressor and two stage power turbine for higher ratings.
PT6A-41AG Similar to PT6A-41, intended for agricultural aviation.
PT6A-42 Similar to PT6A-41 except for increased cruise rating and increased inter-turbine temperature
limits with improved compressor and reduced loss exhaust ducts.
PT6A-42A Same as PT6A-42 except for addition of fuel control unit with manual override, compressor
wash ring, accessory gearbox chip detector, P3 filter drain, and oil filler neck with check valve.
PT6A-45 Similar to PT6A-41 except for increased ratio reduction gearbox and higher ratings.
PT6A-45A Similar to PT6A-45 except for increased takeoff rating and increased inter-turbine temperature
limits.
PT6A-45B Similar to PT6A-45A except for increased augmentation fluid flow for takeoff rating to a higher
air inlet temperature.
PT6A-45R Similar to PT6A-45B except for provision for automatic power increase from alternate takeoff
power to takeoff power.
PT6A-50 Similar to PT6A-45A except for new reduction gearbox.
PT6A-112 Similar to PT6A-27 except incorporates PT6A-41 fuel system concepts and PT6A-135 reduction
gearbox.
PT6A-114 Similar to PT6A-135 with a single port exhaust and PT6A-41 fuel system concepts and PT6A-
135 reduction gearbox.
PT6A-114A Throttle push version of -114 incorporating the -135A compressor, and a new strengthened
propeller shaft.
PT6A-135 Similar to PT6A-36 except for new reduction gearbox and higher cruise rating.
PT6A-135A Similar to PT6A-135 except for increased thermodynamic capability compressor.
PT6A-110 Similar to PT6A-11 except for incorporation of PT6A-135 reduction gearbox.
PT6A-65B Similar to PT6A-45 except for additional axial compressor stage and increased diameter gas
producer turbine wheel.
PT6A-65R Identical to PT6A-65B except for reserve takeoff rating.
TCDS E4EA PAGE 22

NOTE 13. Model Characteristics

(Cont'd)
PT6A-65AR Uprated maximum continuous power PT6A-65R.
PT6A-65AG Similar to PT6A-65, intended for Agricultural Aviation. Ratings similar to the 65AR without
automatic reserve power.
PT6A-60 Uprated PT6A-42, featuring new first stage compressor gas producer turbine from PT6A-65 and
gearbox from PT6A-45.
PT6A-60A Uprated altitude performance PT6A-60.
PT6A-60AG Similar to PT6A-60A, but with derated max continuous power, and intended for agricultural
aviation.
PT6A-61 Similar to PT6A-60 except for PT6A-42 gearbox.

PT6A-61A Updated altitude performance PT6A-61.

PT6A-116 Similar to PT6A-135 except for reduced takeoff and maximum continuous power and torque
limit with PT6A-121 externals.
PT6A-121 Similar to PT6A-21 except for a PT6A-135 reduction gearbox and a PT6A-112 power turbine.
PT6B-35F Combines the aerodynamic components of the PT6A-135, the mechanical layout of the
PT6A-34 and the PT6T-3 generator and exhaust case. Intended for remote drive propeller
applications.

PT6D-114A Based on the PT6A-114A with the main difference being the deletion of the second stage
reduction gearing and output shaft. Intended for integration with a combining gearbox
incorporated power turbine governors and a propeller output shaft.

PT6A-52 Similar to the PT6A-61 with the PT6A-60A thermal rating.

NOTE 14. Certain engine parts are life limited. These limits are listed in P&WC Engine Service Bulletin Nos. 1002, 1302,
1402, 1602,, 3002, 4002, 12002, 12102, 13002, and 13202 as revised. Permissible overhaul and inspection
intervals are listed in PWC Engine Service Bulletin Nos. 1003, 1303, 1403, 1603, 1703, 1803, 3003, 3303, 4003,
12003, 12103, 13003, 13203, and 13303 as revised.

NOTE 15. Fuel anti-icing additives conforming to specifications 3GP526A PFA 55MB, MIL-I-27686E may be used, at a
concentration not exceeding 0.15% by volume.

NOTE 16. For PT6A-34, PT6A-34B, PT6A-36, PT6A-45, PT6A-45A and PT6A-45B power may be restored in hot day
conditions by means of water or water/methanol injection when accomplished in accordance with the requirements
of the PWC Installation Manual.

NOTE 17. For PT6A-50 C.G. location (dry weight) is 27.69 in. behind forward mounting ring, 0.27 in. below horizontal
centerline and 0.15 in. left of vertical centerline.

NOTE 18. Augmentation fluid, when used, must meet the requirements of PWC Specification CPW
No. 328.

NOTE 19. This Type Certificate Data Sheet reflects the certification basis and approval for those serial numbered model
PT6A, PT6B and PT6D series engines listed under "Certification Basis". Two Type Certificates have been issued
for administrative purposes: E4EA under FAR 21.29 for engines produced in Canada and E2NE under FAR 21.21
for engines produced in the United States. The type design for each model engine, regardless of where produced, is
identical. The information on this Type Certificate Data Sheet applies to all Pratt & Whitney model PT6A, PT6B
and PT6D series engines, including:

(A) Those serial numbered engines listed on and certificated under FAA Type Certificate E2NE, originally issued
to Pratt & Whitney Aircraft Division of United Technologies Corporation, East Hartford, Connecticut, U.S.A. and
reissued to Pratt & Whitney of Canada Ltd. (Formerly United Aircraft of Canada, LTd.), Longueuil, Quebec,
Canada.

(B) Those serial numbered engines listed above under "Certification Basis," certificated under this Type
Certificate, E4EA, issued to Pratt & Whitney Canada Corp, Longueuil, Quebec, Canada.

NOTE 20. Service Bulletins, structural repair manuals, vendor manuals, aircraft flight manuals, and overhaul and
maintenance manuals, which contain a statement that the document is Transport Canada approved, are accepted by
the FAA and are considered FAA approved. These approvals pertain to the type design only.
----END----