Scribd
Upload
346 views

Citect SCADA 2016 Communication

The document outlines 11 steps for installing and configuring Citect SCADA 2016 software on a Windows 10 PC including installing prerequisites, restoring a backup file, modifying network settings to match the PC's IP address, and configuring OPC settings before running the software.

Uploaded by

RAJIB BANIK
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
346 views

Citect SCADA 2016 Communication

The document outlines 11 steps for installing and configuring Citect SCADA 2016 software on a Windows 10 PC including installing prerequisites, restoring a backup file, modifying network settings to match the PC's IP address, and configuring OPC settings before running the software.

Uploaded by

RAJIB BANIK
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

• System Requirement :

1. Operating System : Windows 10 Pro 64 Bit


2. OS Build Version : 1803

• Prerequisite :

1. Turn Off Windows Firewall .

• Step 1 : Install Citect SCADA 2016 .

• Step 2 : Install Citect_SCADA_2016_Update_22_(Oct_9_2018) , Install


OPC_2.04.09.000_RELEASE driver & Restart the PC.
• Step 3 : Restore SCADA Backup by Clicking on Project Restore icon .
• Step 4 : Click on Browse > Select .ctz File > OK

• Step 5 : Open Citect Studio and click on Project > Make Active .
• Step 6 : Click on Topology > Edit .

• Step 7 : Scroll down button and select Network Address .


• Step 8 : Scroll down button and select Network Address & Modify IP address .

Note : Network address should be same as a PC's IP address.

• Step 9 : Click on Projects > Click on Scroll down button near to Setup Wizard > Setup
Editor.
• Step 10 : Make setting as per below screenshot in OPC & File > Save > Reload.

• Step 11 : Pack > Compile > Run .

You might also like