100% found this document useful (1 vote)
583 views10 pages

BOQ For Batching Plant Area1

1. The document provides details of the estimated costs for various construction works required for a batching plant area, including earthwork, concrete work, reinforcement, brickwork, plastering, flooring, road work, and more. 2. It lists the unit quantities, rates, and total amounts for excavation, filling, concrete of various grades, shuttering, reinforcement bars, brickwork, plastering, screed work, structural steel, roof sheeting, road work, pavers and kerbs, and brick soling. 3. The total estimated cost for all the listed construction works is Rs. 8,515,527.

Uploaded by

sh2705_877839042
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
583 views10 pages

BOQ For Batching Plant Area1

1. The document provides details of the estimated costs for various construction works required for a batching plant area, including earthwork, concrete work, reinforcement, brickwork, plastering, flooring, road work, and more. 2. It lists the unit quantities, rates, and total amounts for excavation, filling, concrete of various grades, shuttering, reinforcement bars, brickwork, plastering, screed work, structural steel, roof sheeting, road work, pavers and kerbs, and brick soling. 3. The total estimated cost for all the listed construction works is Rs. 8,515,527.

Uploaded by

sh2705_877839042
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 10

1

6
7

10

11

12
13

14
ENQUIRY FOR BATCHING PLANT AREA:
Description
Earth Work
Excavation by mechanical means or manually in ordinary soil for foundations of offic
including dressing of sides and bottom.
Filling Work
Filling in plinth, trenches sides of foundation with excavated soil including transpor
watering, ramming and compacting each layer of 150mm to 200mm, using mecha
(Layer should be 95 % proctor density achieved), etc. Lead above 50M and within 50
Concrete Work
Providing & laying in position Plain cement concrete of required grades below stru
viz. as per structural design and as directed in specified compressive strength in N/
2000 finishing concrete surfaces, curing etc. complete but excluding centring / shutte

PCC 1:5:10
PCC 1:4:8
Providing & laying in position required grade reinforced cement concrete (RCC) as
in specified compressive strength in N/mm2 at 28 days confirming to IS 456-2000 fi
complete but excluding centring / shuttering and reinforcement.

M-20 Grade
M-25 Grade
Shuttering
All charges for Centering and Shuttering including Strutting, making, Propping e
specified period has elapsed after concreting, including all leads & lifts at all levels, t
consumables.
Reinforcement
Providing & laying Thermo-mechanically Treated (TMT) bars (Fe 500) of different di
sizes and shapes placing in position with cover blocks of approved size, binding wir
for reinforcement work as per approved designs and drawings. Rate to include tran
per drawings and all wastages complete.

BRICK WORK
Providing & fixing the first class M-10 grade Red Burnt Clay Bricks in all location in c
including striking joints, racking out joints, watering, scaffolding and cleaning etc. com
curing.
PLASTER WORK
Providing and applying avg. 12mm thk. (avg.) internal plaster in cement sand morta
of brick walls and finishing the same (smooth or broom) in correct line, level & plum
jambs, soffits, grooves, pattas etc. as per drawings & relevant specifications includin
scaffolding, p/f of PVC chicken mesh of approved quality at all junctions with waterin
all levels and heights.

Concrete Flooring
Providing & laying flooring of 20mm thick with cement concrete nominal mix o
Aggregate) in correct level / slope as per architectural drawings including mixing o
the work location, compacting / vibrating, finishing smooth to the satisfaction of t
surface etc. complete.

Screed
Providing and laying screed concrete of the desired thickness as per drawing 1:2:4 m
required as shown in drawing, complete in all respect..
Structural Steel
Providing, fabricating, erecting, fixing in position and connecting, MS structural wo
doors, railings, etc. of ISMC, SHS sections, built-up sections, bracing, Insert plat
brackets with providing bolts & nuts, washers, check nuts, welding etc. complete in a
Rate to include transporting of material to work at site, loading & unloading o
wherever necessary, erecting in position bolting / welding to foundation, including
plate/grouting including 2 coat of red oxide primer and 1 coat of Synthetic enamel
all complete as per drawings. Unit weight should comply as per drawings.

ROOF SHEETING
Providing and fixing in position 0.5 mm thick colour coated GI sheets for Roof includi
self tapping screws, EPDM washers, seambolts, stitch rivets at overlap and all other h
in all respect .The roof seets are laid over a frame work of Trusses, columns, and purl
rubber washer including all types of Flashing including necessary , fabrication, adjusti
drawings and specifications and as directed by the Engineer-In-charge

ROAD WORK
Preparation and consolidation of sub grade with road roller of suitable capacity aft
22.5 cm depth, dressing to camber and consolidating with road roller including mak
rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
Providing and laying Granular Sub Base conforming to Grading II of compacted thickn
stone metal and sand mixed in place and laid with mechanical means spreading wit
vibratory roller having minimum 80 - 100 KN static weight to achieve desired
machinery with all leads and lifts etc., complete.

Pavers & Kerbs


Providing and laying 60 mm thick machine moulded factory made coloured cem
Grade concrete of approved sizes and shapes over 30 mm thick sand bedding
compaction of sand bed with speed vibrator and paver blocks with vibrator / com
between kerb stones/runner beam with cement mortar of 1:1 mix and paver bloc
lifts etc. complete. A SP 1 of MoRTH Specifications.

Kerb Stone Supply of M-25 grade using black trap aggregate 20 mm. nominal size for
and fixing the kerbs in position with necessary equipments and materials. The rate s
CM (1:2) for all joints including providing and appying synthetic enamel paint includi
275mm wide x 275mm height x150mm thick (Sample must be approved). Laying
per MORTH Specifications.

Brick Soling
Supply and laying of First class Local Flat Brick soling in flooring foundation to fill join
dressing bed to proper level and filling joints with powdered earth or local sand a
engineer

Sub total
Unit Qty Rate Amount

Cum 245 252 61664

Cum 459 220 101046

Cum 18 5520 96710


Cum 18 5790 101441

Cum 16 7718 119822


Cum 16 7997 130351

Sqm 194 285 55404

MT 21 83500 1768530

Cum 363 7800 2829918


Sqm 1548 276 427345

Sqm 864 325 280800

Sqm 173 225 38880

MT 16 101000 1616000

Sqm 691 915 632448

Cum 288 0
Cum 288 0

Sqm 959.4 0

Rmt 500 0

Sqm 576 443 255168

8,515,527
680 0.01725
0.02645 1.533333 443.4783

37.80718 7 264.6503

You might also like