ePRV
Electronically Controlled
Pressure Relief Valve
Electronically controlled
pressure relief valve (ePRV)
The TechnipFMC electronically controlled pressure relief valve (ePRV) automatically reseats after
an over pressure event, improves reliability and accuracy while reducing personnel exposure
at the wellsite. Unlike other full opening pressure relief valves, the ePRV is electrically powered
and requires no gas bottles or hoses, reducing the exposure of your people and protecting your
equipment.
Solution engineered
The TechnipFMC Electronically Controlled Pressure Relief Valve (ePRV) is solution engineered with simplicity, reduced
exposure and reliability in mind.
With the ability to re-seat itself without manual intervention, your personnel stay out of the red zone, resulting in less
personnel exposure, less downtime and improved production. Unlike other full-opening pressure relief valves, the ePRV
is electrically powered and requires no gas bottles or hoses, improving the protection of your people and equipment.
The ePRV will accurately
Electrical inlet
and rapidly relieve the full
line pressure allowing you to
trouble shoot the root cause
Poppet
of the incident. It also comes
standard with Weco® end
connections, which are known Pilot valve body
for their proven reliability.
With hydraulic fracturing Pilot valve mounting nut
operations becoming more
Cage
sophisticated and capital in-
tensive, the pressure pumping
liability risks have never been Cage to main valve
higher. Equipment uptime and body seal
reducing personnel expo- Exit bore insert
Cage to poppet seal
sure have become greater
priorities across all basins.
The ePRV will improve your Port seal &
bottom line performance and Cage face seal
Main valve body
help protect your people and
equipment.
ePRV 3D view
1 TechnipFMC | ePRV
Key features
`` Requires no gas bottles or hoses `` If power is lost, the ePRV failure mode is to pop open
unless battery back-up is employed
`` Does not require a separate gas control panel
`` Reseats automatically after line pressure is fully
`` Not subject to change pressure due to gas law effect
relieved (operations terminating relief device)
when ambient temperatures change
`` Easy field-replaceable main valve internal
`` Operated by hydraulic piloting system as opposed to
components
gas system
`` Visual indicator allows you to see when the valve is
`` Standard piloting systems requires only 24 VDC,
open/closed
2 amp signal to operate (consult factory for other
available voltages) `` Patents Pending
`` Main valve uses proven Weco® standard tee body
forging
Specifications
Configuration Design Rating
`` Standard Weco® Union Ended Connections `` Weight: 157 lbs (71 kg)
–– a. Inlet: 3” Figure 1502 male sub and nut `` Max. Working Pressure:
–– b. Outlet: 3” Figure 1502 female sub 15,000 psi (103.4 MPa)
`` Cold working pressure of 15,000 psi `` Operating Temperature:
-40 to 180 °F (-40 to 82 °C)
`` Main valve bore: 1.75”
`` Envelope Dimensions:
`` Main valve and pilot valve body made from high
strength low alloy steel –– Height: 24.7” (628 mm)
`` Piloting system internal components employ –– Width: (Outlet Side): (Outlet Side): 12.9” (328 mm)
precipitation hardened stainless steel materials –– Depth: (Nut Clearance): (Nut Clearance): 11.3” (288 mm)
`` Explosive decompression resistant intervals `` Part Number:
`` Liquid nitride hardened main valve poppet –– ePRV Assembly: P557316
–– Repair Kit: P557277
Installation Interfaces
`` Standard Weco® 3” Figure 1502 connections `` Pilot valve electrical connector:
`` For use on main flowlines between missile trailer –– Height: 24.7” (628 mm)
and well –– Width: (Outlet Side): (Outlet Side): 12.9” (328
`` Consult the factory for ePRV systems employing mm)
the following: –– Depth: (Nut Clearance): (Nut Clearance): 11.3”
–– a. Isolation Valves (288 mm)
–– b. Lifting Cages `` Part Number:
–– DIN 43650 Form “A”
–– (ISO 4400, EN175301-803:2000)
TechnipFMC | ePRV 2
Houston
One Subsea Lane
Houston, Texas, USA 77044
Tel: +1 281 591 4000
London
One St Paul’s Churchyard
London, U.K. EC4M 8AP
Tel.: +44 (0)20 3429 3950
France
89 avenue de la Grande Armée
75116 - Paris - France
Tel.: +33 (0)1 47 78 24 00
TechnipFMC.com © TechnipFMC plc 2018
SI012
