Scribd
Upload
2K views1 page

API RP 8B Drilling Equipment CAT IV Inspections

K2 Specialist Services carried out inspections on various drilling equipment as part of a five-year maintenance schedule for Atwood Oceanics. The inspections found excessive wear on many parts that required replacement. Challenges included elongated pin holes on compensator blocks that required line boring and oversized pins. Bearing cones on dolly rollers were also extremely tight and required a custom jig for removal. K2's approach was to dismantle, deliver, overhaul, and reinstall all drilling equipment within their workshop over a two month period.

Uploaded by

Edgar Mejias
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

API RP 8B Drilling Equipment CAT IV Inspections

K2 Specialist Services carried out inspections on various drilling equipment as part of a five-year maintenance schedule for Atwood Oceanics. The inspections found excessive wear on many parts that required replacement. Challenges included elongated pin holes on compensator blocks that required line boring and oversized pins. Bearing cones on dolly rollers were also extremely tight and required a custom jig for removal. K2's approach was to dismantle, deliver, overhaul, and reinstall all drilling equipment within their workshop over a two month period.

Uploaded by

Edgar Mejias
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

API RP 8B Drilling

Equipment CAT IV
Inspections: Singapore
K2 Specialist Services carried out API RP 8B
CAT IV inspections on Travelling Blocks (x2),
Crown Cluster, Fast Line, Dead Line,
Compensator Blocks and Dolly Frame as
part of Atwood Oceanics five yearly
maintenance schedule.

Project Scope
• Complete overhaul of Drilling Equipment which
includes disassembly of all units.
• Full inspection of all the components including NDT
and dimensional checks on all pins/bosses, rope
grooves and load bearing areas of all equipment.

Challenges
• The amount of wear on much of the equipment was
excessive and many parts had to be replaced.
• The pin bosses on the compensator block had
elongated holes and the pins were worn excessively, the
Lifecycle Services for the bosses had to be line bored and oversized pins were
Oil & Gas Industry fabricated and fitted.
• Bearing cones from the dolly rollers were extremely
tight, we had to design / fabricate a jig to remove the
bearings.
Asset
Asset K2 Approach
K2 rig building teams dismantled all drilling equipment,
Owner
Drilling Equipment delivered and reinstalled back the entire drilling
Owner equipments to K2 workshop for overhaul. Upon completion
of overhaul, client had to monitor and sign off on completed
Location
Atwood Oceanics workscopes.

Location • Rig building – removal and reinstallation of equipment


Duration
• Mechanical Scopes
Singapore • Inspection
• Structural Repairs
K2’s team
Duration • Painting
2 months
K2 Comments
K2’s team “A perfect example of our capability to provide a one stop
service, K2 removed the equipment, overhauled and
Drilling Equipment Supervisor reinstalled the equipment”, Derek Burr, K2 Services
Director
Service Technicians
NDT Technicians Client Feedback
“The team has been very professional all the
time. The installation was completed
in a safely manner and in a given
period of time.”

www.k2velosi.com
www.k2velosi.com

Lifecycle Services for the Oil & Gas Industry Asset Owner Location Duration K2’s team www.k2velosi.com A

You might also like