Magnetic Sensors

Line Guide
You know us as a leader, whether you’ve known us as MICRO with other electronic circuits, responding to the presence or the
SWITCH or Honeywell Sensing and Internet of Things (SIoT). interruption of a magnetic field by producing a proportional
In 1968, we revolutionized the industry with the first solid- output. Gear-tooth and other packaged Hall-effect speed and
state keyboard combining Hall-effect sensing and associated direction sensors sense movements of a ferrous metal target.
electronics in a single circuit. Today, the Honeywell SIoT family Digital and analog “sensor-only” devices are operated by a
of magnetic position sensors includes digital and analog permanent magnet or electromagnet, while actuation mode
Hall-effect position, magnetoresistive digital, Hall-effect vane, depends on the type of magnets used. A vane passing through
gear-tooth, and Hall-effect basic switches and magnets. These a gap or a magnet mounted on a plastic plunger operates
high-speed, extended life sensors are often directly compatible integral magnet position sensors.

FEATURES
LOW POWER HALL-EFFECT SENSOR operation. Thermally balanced integrated Benefits: Integrated circuitry provides
ICS - DIGITAL circuit provides for stable operation over a enhanced temperature stability in a
wide temperature range, of -40° to 85°C robust design. Thermally balanced
[-40° to 185°F]. SOT-23 subminiature integrated circuit over full temperature
SL353 Series.
package requires less PCB space, range. Built-in regulator provides stable
Features: Energy efficient • Push-
allowing for use in smaller assemblies. operation over supply voltage range.
pull output • Non-chopper stabilized
North pole or South pole operation does Open-collector sinking output voltage
design • Omnipolar magnetics •
not require the magnet polarity to be easily interfaces with wide variety of
Thermally balanced integrated circuit
identified, making installation easier electronic circuits. Internal circuitry
• Subminiature package size • Simple
and potentially reducing system costs. prevents sensor damage in case supply
activation from a North pole or a South
Supplied on tape and reel which allows voltage polarity is accidentally reversed.
pole • Tape and reel packaging
for a compact design with automated Potential applications include speed
Benefits: Supply voltage as low as 2.2 component placement, helping to and RPM sensing, brushless dc motor
Vdc, combined with very low average reduce manufacturing costs. Potential commutation, motor and fan control,
current of 1.8 uA typ., reduces power applications include motion control, lid magnetic encoding, disc speed, tape
consumption, provides extended battery closure detection, presence-absence, rotation, and flow-rate sensing.
life, and promotes energy efficiency. metering, and displacement sensing
Push-pull output does not require on battery-operated, mobile equipment SS311PT, SS411P.
external pull-up resistor, simplifying such as computer notebooks, scanners, Features: Bipolar magnetics • Enhanced
interface with common electrical circuits hand-held industrial computers, sensitivity • Built-in pull-up resistor • Low
and potentially reducing PC board space instrumentation and appliances. voltage: 2.7 Vdc to 7 Vdc • Subminiature
and costs to the customer. Does not package size (SS311PT) • Through-hole
utilize chopper stabilization, eliminating HALL-EFFECT SENSOR ICS - DIGITAL and surface-mount (SOT-23 and SOT-
the noise generated by products using SS30AT, SS40A, SS50AT. 89B) packages • Cost effective
this technique, meaning that customers Features: Bipolar magnetics • Sinking Benefits: Enhanced sensitivity often
do not need filters to compensate for the output • High output current capability allows for use of smaller, less expensive
noise. Omnipolar capability with high • High speed capability • Reverse polarity magnets. Built-in pull-up resistor easily
and low duty cycle options allows for use protection • Small through-hole and interfaces with common electronic
in a variety of potential applications with surface mount (SOT-23 and SOT-89B) circuits without adding external
low power requirements and/or battery packages • Tape and reel available components, helping to reduce total
continued on page 10
Magnetic Sensors Line Guide

Precision. Repeatability.
Low power Hall-
Ruggedness. effect sensor ICs -
Each Honeywell SIoT digital SL353 Series
magnetic sensor IC is
engineered to provide top Description micropower omnipolar digital Hall-effect sensor IC
performance:
Magnetic actuation type omnipolar
Hall-effect sensor ICs are Package style (packaging) SOT-23 (pocket tape and reel)
constructed from a thin
Supply voltage range 2.2 Vdc to 5.5 Vdc
sheet of conductive material
SL353LT: 1.8 uA typ. at 2.8 Vdc
with output connections Supply current
SL353HT: 0.33 mA typ. at 2.8 Vdc
perpendicular to the direction
Output type digital
of current flow.
Operating temperature range -40°C to 85°C [-40°F to 185°F]
Magnetoresistive
sensor ICs have a built-in
magnetoresistive bridge
integrated on silicon,
encapsulated in a plastic
package. The sensitive
integrated circuit responds
to low (25 G max.) fields at
Hall-effect sensor
distances up to 1 inch. ICs - digital
Hall-effect vane sensor SS30AT, SS40A, SS50AT SS311PT, SS411P
ICs consist of a magnet and
a Hall-effect sensor inside low-cost bipolar digital Hall-effect bipolar digital Hall-effect sensor ICs with
Description
a rugged plastic housing. sensor IC built-in pull-up resistor
Different package styles Magnetic actuation type bipolar bipolar
provide mounting flexibility. SS30AT: SOT-23 (pocket tape and reel)
SS40A: flat TO-92-style, standard straight SS311PT: SOT-23 (pocket tape and reel)
Additional built-in benefits: Package style
leads (bulk) SS411P: flat TO-92-style, standard straight
(packaging
true solid state, extended life SS50AT: SOT-89B (pocket tape and reel) leads (bulk)
(30 billion operations in a
module test program), high Supply voltage range 4.5 Vdc to 24 Vdc 2.7 Vdc to 7 Vdc
speed operation (over 100 Supply current 10 mA max. 14 mA max.
kHz), stationary input (zero Output type digital sinking digital sinking
speed), no moving parts, logic
SS40A: -40°C to 125°C
compatible output, and broad [-40°F to 257°F] -40°C to 150°C
Operating temperature range
temperature range (-40°C to SS30AT, SS50AT: -40°C to 125°C [-40°F to 302°F]
150°C [-40°F to 302°F]). [-40°F to 257°F]

2 Sensing and Internet of Things

Hall-effect sensor
ICs - digital
SS340RT, SS440R Series SS345PT, SS445P SS351AT, SS451A, SS551AT

Description unipolar Hall-effect digital sensor IC unipolar Hall-effect digital sensor IC omnipolar Hall-effect digital sensor IC
SS340RT: North pole
Magnetic actuation type unipolar omnipolar
SS440R: South pole
SS351AT: SOT-23 (pocket tape and reel)
SS340RT: SOT-23 (pocket tape and reel) SS345PT: SOT-23 (pocket tape and reel)
Package style SS451A: flat TO-92-style, standard
SS440R: flat TO-92-style, standard straight SS445P: flat TO-92-style, standard straight
(packaging straight leads (bulk)
leads (bulk) leads (bulk)
SS551AT: SOT-89B (pocket tape and reel)
3 Vdc to 24 Vdc, except SS340RT 3 Vdc to 24 Vdc, except SS351AT
Supply voltage range 2.7 Vdc to 7.0 Vdc
>125°C [257°F]: 3 Vdc to 12 Vdc >125°C [257°F]: 3 Vdc to 12 Vdc
Supply current 8 mA 14 mA 9 mA
Output type digital sinking digital sinking digital sinking
SS340RT (3 Vdc to 24 Vdc): SS351AT (3 Vdc to 24 Vdc):
-40°C to 125°C [-40°F to 257°F] -40°C to 125°C [-40°F to 257°F]
SS340RT (3 Vdc to 12 Vdc): SS351AT (3 Vdc to 12 Vdc):
Operating temperature range -40°C to 150°C [-40°F to 302°F]
-40°C to 150°C [-40°C to 302°F] -40°C to 150°C [-40°C to 302°F]
SS440R (3 Vdc to 24 Vdc): SS451A, SS551AT (3 Vdc to 24 Vdc):
-40°C to 150°C [-40°F to 302°F] -40°C to 150°C [-40°F to 302°F]

Hall-effect sensor
ICs - digital
SS360NT, SS360ST, SS360ST- SS360PT, SS460P, SS361CT, SS461C
10K, SS460S, SS460S-T2 SS460P-T2
high sensitivity latching Hall-effect digital high sensitivity latching Hall-effect digital high sensitivity latching Hall-effect digital
Description
sensor IC sensor IC with built-in pull-up resistor sensor IC
Magnetic actuation type latching latching latching
SS360NT, SS360ST, SS360ST-10K:
SOT-23 (pocket tape and reel) SS360PT: SOT-23 (pocket tape and reel)
SS460S: flat TO-92-style, standard straight SS460P: flat TO-92-style, standard straight SS361CT: SOT-23 (pocket tape and reel)
Package style
leads (bulk) leads (bulk) SS461C: flat TO-92-style, standard straight
(packaging)
SS460S-T2: flat TO-92-style, formed leads; SS460P-T2: flat TO-92-style, formed leads leads (bulk)
(ammopack tape-in-box) (ammopack tape-in-box)
SS460-LP:
Supply voltage range 3 Vdc to 24 Vdc 3 Vdc to 24 Vdc 4 Vdc to 24 Vdc
Supply current 8 mA max. 10 mA max. 6 mA max.
Output type digital digital digital sinking
Operating temp. range -40°C to 125°C [-40°F to 257°F] -40°C to 125°C [-40°F to 257°F] -40°C to 125°C [-40°F to 257°F]

Sensing and Internet of Things 3

Magnetic Sensors Line Guide

Hall-effect sensor
ICs - digital
SS361RT, SS461R VF360NT, VF360ST, VF460S SS400, SS500 Series

SS400: unipolar/bipolar/latching
high sensitivity latching digital Hall-effect digital sensor IC
Description latching Hall-effect digital sensor IC
Hall-effect sensor IC SS500: unipolar/bipolar/latching
Hall-effect digital sensor IC
Magnetic actuation type latching latching unipolar, bipolar, latching
VF360NT, VF360ST: SOT-23 (pocket tape
SS361RT: SOT-23 (pocket tape and reel) SS400: flat TO-92-style, standard straight
Package style and reel)
SS461R: flat TO-92-style, standard straight leads (bulk)
(packaging) VF460S: flat TO-92-style, standard straight
leads (bulk) SS500: SOT-89B (pocket tape and reel)
leads (bulk)
3 Vdc to 18 Vdc, except SS361RT >125°C
Supply voltage range 3 Vdc to 24 Vdc 3.8 Vdc to 30 Vdc (inclusive)
[257°F]: 3 Vdc to 12 Vdc
SS400: 10 mA
Supply current 8 mA 8 mA max.
SS500: 8.7 mA at 5 Vdc
Output type digital sinking digital sinking digital sinking
SS361RT (3 V to 12 V), SS461R: 40°C to
40°C to 150°C
150°C [-40°F to 302°F] -40°C to 150°C
Operating temperature range [-40°F to 302°F
SS361RT (3 V to 18 V): -40°C to 125°C [-40°F to 302°F]
[-40°F to 257°F]

Hall-effect sensor
ICs - digital
SS41, SS51T VF526DT

latching dual Hall-effect digital sensor IC with speed and

Description bipolar Hall-effect digital sensor IC
direction outputs
Magnetic actuation type bipolar latching
Package style SS41: flat TO-92-style, standard straight leads (bulk)
SOT-89B (pocket tape and reel)
(packaging) SS51T: SOT-89B (pocket tape and reel)
Supply voltage range 4.5 Vdc to 24 Vdc 3.4 Vdc to 24 Vdc
Off: 12 mA max.
Supply current 15 mA max.
On: 14 mA max.
Output type digital sinking digital voltage, dual open collector sinking
-40°C to 150°C -40°C to 125°C
Operating temperature range
[-40°F to 302°F] [-40°F to 257°F]

4 Sensing and Internet of Things

Hall-effect sensor
ICs - linear
SS39ET, SS49E, SS49E-F, SS49E-L, SS490, SS491B Series
SS49E-T2, SS49E-T3, SS59ET
Description Hall-effect linear sensor IC Hall-effect linear sensor IC
Magnetic actuation type linear linear
SS39ET: SOT-23 (pocket tape and reel)
SS49E: flat TO-92-style, standard straight leads (bulk)
SS49E-F: flat TO-92-style, formed leads (bulk) flat TO-92-style, standard straight leads (bulk)
Package style
SS49E-L: flat TO-92-style, long straight leads (bulk)
(packaging)
SS49E-T2: flat TO-92-style, formed leads (ammopack tape-in-box)
SS49E-T3: flat TO-92-style, standard straight leads (ammopack tape-in-box)
SS59ET: SOT-89B (pocket tape and reel)
Supply voltage range 2.7 Vdc to 6.5 Vdc 4.5 Vdc to 10.5 Vdc
Supply current 10 mA max. 10 mA
Output type ratiometric sourcing ratiometric sinking or sourcing
Operating temperature -40°C to 100°C -40°C to 150°C
range [-40°F to 212°F] [-40°F to 302°F]

Magnetoresistive
sensor ICs
Nanopower Standard Power 2SS52M
Series Series Series
omnipolar magnetoresistive omnipolar magnetoresistive omnipolar magnetoresistive digital
Description
sensor IC sensor IC sensor IC
Magnetic actuation type omnipolar omnipolar omnipolar
SM351RT, SM353RT: SOT-23 (pocket
Package style tape and reel)
SOT-23 (pocket tape and reel) U-pack, straight leads (bulk)
(packaging) SM451RT, SM453RT: flat TO-92-style,
standard straight leads (bulk)
Supply voltage range 1.65 Vdc to 5.5 Vdc 3 Vdc to 24 Vdc 3.8 Vdc to 30 Vdc
SM351LT: 360 nA typ.
Supply current 8 mA max. 11 mA max.
SM353LT: 310 nA typ.
low: 0.03 V typ.
Output type digital sinking digital sinking
high: Vs-0.03 V typ.
Operating temperature -40°C to 85°C -40°C to 85°C -40°C to 150°C
range [-40°F to 185°F] [-40°F to 185°F] [-40°F to 302°F]

Sensing and Internet of Things 5

Magnetic Sensors Line Guide

Magnetoresistive
sensor ICs
SS552MT VF401 APS00B
Series
omnipolar magnetoresistive digital 2-wire MR fine-pitch ring magnet high resolution magnetic displacement
Description
sensor IC sensor IC sensor IC
Magnetic actuation type omnipolar differential bridge analog, saturated mode
flat TO-92-style, standard straight leads
Package style SOT-89B (pocket tape and reel) SOIC-8 (pocket tape and reel)
(bulk)
Supply voltage range 3.8 Vdc to 30 Vdc 4.5 Vdc to 16 Vdc 1 Vdc to 12 Vdc
operate: 16.8 mA max.
Supply current 11 mA max. 7 mA max.
release: 8.4 mA max.
dual analog voltages responding to
Output type digital sinking digital sourcing
changes in magnetic field angle
-40°C to 150°C -40°C to 150°C -40°C to 150°C
Operating temp. range
[-40°F to 302°F] [-40°F to 302°F] [-40°F to 302°F]

Value-added Hall-
effect sensors
103SR Series (Digital) 103SR Series (Linear)

Description Hall-effect digital position sensor Hall-effect linear position sensor

Package material and style aluminum threaded barrel aluminum threaded barrel
Magnetic actuation unipolar, bipolar, latching linear
Operation proximity to external magnet proximity to external magnet
Supply voltage range 4.5 Vdc to 24 Vdc 4.5 Vdc to 10.5 Vdc
Supply current 4 mA to 10 mA (inclusive) 7 mA
Output type digital sinking ratiometric sinking/sourcing
Operating temperature range -40°C to 100°C [-40°F to 212°F] -40°C to 100°C [-40°F to 212°F]

6 Sensing and Internet of Things

Value-added Hall-
effect sensors
SR3 Series SR4 Series

Description Hall-effect digital position sensor magnetoresistive digital position sensor

Package material and style plastic threaded barrel plastic threaded barrel
Magnetic actuation unipolar, bipolar omnipolar
Operation proximity to external magnet proximity to external magnet
Supply voltage range 4.5 Vdc to 24 Vdc 3.8 Vdc to 30 Vdc
Supply current 10 mA 11 mA
Output type digital sinking digital sinking
Operating temperature range -40°C to 85°C [-40°F to 185°F] -40°C to 85°C [-40°F to 185°F]

Value-added Hall-
effect sensors
SR16/SR17 Series

Description low-cost Hall-effect vane sensor

SR16: plastic dual tower with variety of terminations
Package material and style
SR17: plastic side-mount wire exit
Magnetic actuation –
Operation ferrous metal actuator
Supply voltage range 3.8 Vdc to 30 Vdc
Supply current 10 mA max.
Output type digital sinking
Operating temperature range -20°C to 85°C [-4°F to 185°F]

Sensing and Internet of Things 7

 Active speed
sensors
SNG-Q Series SNDH-T Series

Description Hall-effect speed and direction sensor with quadrature output Hall-effect speedand direction sensor with quadrature output
Housing material PBT stainless steel and plastic
45 mm [1.77 in],
Housing length 35 mm [1.38 in]
35 mm [1.38 in]
Supply voltage range 4.5 V to 26 V 4.5 Vdc to 18 Vdc
Supply current 2 mA normal, 18 mA max. 18 mA max.
Output type square wave square wave
Operating frequency range 3 Hz to 20 kHz 1 Hz to 15 kHz
-40°C to 150°C -40°C to 150°C
Operating temperature range
[-40°F to 302°F] [-40°F to 302°F]

Active speed
sensors
SNDH-H Series LCZ Series ZH10 Series

Description Hall-effect speed sensor Hall-effect zero speed sensor Hall-effect zero speed sensor
Housing material stainless steel or plastic stainless steel aluminum
Supply voltage range 4 Vdc to 24 Vdc (inclusive) 4.5 Vdc to 26 Vdc 4 Vdc to 24 Vdc
Supply current 20 mA max. 20 mA 6 mA
Output type digital sinking digital sinking digital sinking
Operating frequency range 0 Hz to 15 kHz, 2 Hz to 15 kHz 0 Hz to 15 kHz 0 Hz to 15 kHz
Operating temperature range -40°C to 150°C [-40°F to 302°F] 40°C to 125°C [-40°F to 257°F] -40°C to 125°C [-40°F to 257°F]

Digital magnetic
speed sensors
584XX Series

Description digital magnetic speed sensor

Housing material stainless steel
Supply voltage range 5 Vdc to 30 Vdc
Supply current 15 mA
Output type square wave
Operating frequency range -
Operating temperature range -40°C to 107°C [-40°F to 225°F]

8 Sensing and Internet of Things

Passive speed
sensors
VRS General Purpose Series VRS Hazardous Location Series

Output voltage range 8 Vp-p to 40 Vp-p (inclusive) 30 Vp-p to 60 Vp-p (inclusive)

Housing diameter 5/8 in, 3/8 in, 1/4 in, 10/32 in 3/4 in, 5/8 in
Housing material and style stainless steel threaded or smooth stainless steel threaded
Termination MS3106 connector, preleaded MS3106 connector, preleaded
Operating temperature range -55°C to 120°C [-67°F to 250°F] (inclusive) -73°C to 120°C [-100°F to 250°F] (inclusive)

Passive speed
sensors
VRS High Output Series VRS High Resolution Series

Output voltage range 8 Vp-p to 190 Vp-p (inclusive) 17 Vp-p to 170 Vp-p
Housing diameter 5/8 in, 3/8 in 5/8 in, 3/8 in
Housing material and style stainless steel threaded or smooth stainless steel threaded
Termination MS3106 connector, preleaded MS3106 connector, preleaded
Operating temperature range -55°C to 150°C [-67°F to 300°F] (inclusive) -55°C to 120°C [-67°F to 250°F]

Passive speed
sensors
VRS High Temperature Series VRS Power Output Series

Output voltage range 4.7 Vp-p to 125 Vp-p (inclusive) 70 Vp-p (inclusive)
Housing diameter 5/8 in, 3/8 in, 1/4 in 5/8 in
Housing material and style stainless steel threaded stainless steel threaded
Termination MS3106 connector, preleaded MS3106 connector, preleaded
Operating temperature range -73°C to 230°C [-100°F to 450°F] (inclusive) -55°C to 120°C [-67°F to 250°F]

Sensing and Internet of Things 9

system cost. 2.7 Vdc to 7 Vdc supply • Small, flat TO-92-style package component placement, helping to
voltage range allows use in low voltage (SS445P) • Simple activation from a North reduce manufacturing costs. Operated
applications, promoting energy efficiency. pole (SS345PT) or a South pole (SS445P) by a North pole or a South pole, these
Subminiature package size (SS311PT) • Low voltage 2.7 V capability • Built-in products do not require the magnet
allows for compact design. SS311PT is pull-up resistor polarity to be identified, thus making
available on tape and reel for high volume, the installation easier and potentially
Benefits: Subminiature package size
automated component placement, reducing system cost. Built-in reverse
(SS345PT) uses less space on the
helping to reduce manufacturing costs. polarity protection protects the device
PCB than standard Hall-effect sensor
Potential applications include speed from potential damage during installation.
packages such as flat TO-92-style or
and RPM sensing, brushless dc motor Thermally balanced integrated circuit
SOT-89B, allowing for use in smaller
commutation, tachometer, counter provides for stable operation over a wide
assemblies. Tape and reel packaging
pickup, motor and fan control, flow-rate temperature range. Potential applications
(SS345PT) allows for automated
sensing, and robotics control. include speed and RPM (revolutions per
component placement, helping to reduce
minute) sensing in fitness equipment,
manufacturing costs. Small, flat TO-92-
SS340RT, SS440R Series. magnetic encoder for building access,
style package (SS445P) is also available.
Features: Unipolar magnetics: SS340RT damper or valve position control in HVAC
2.7 Vdc to 7 Vdc capability allows for use
responds to North pole; SS440R responds (heating, ventilation and air conditioning)
in low voltage applications, promoting
to South pole • Subminiature package equipment, flow rate sensing in
energy efficiency. Built-in pull-up resistor
size (SS340RT) • Multiple magnetic appliances and industrial processes,
can easily interface with common
sensitivities (high, medium and low) robotic control (cylinder position
electronic circuits without adding
• Low voltage 3 V capability • Built-in monitoring), displacement sensor in
external components, helping to reduce
reverse polarity protection • Thermally hospital beds, and medical equipment.
total system cost. Simple activation
balanced integrated circuit over full from a North pole (SS345PT) or a South
temperature range SS360NT, SS360ST, SS360ST-10K,
pole (SS445P). Potential applications
SS460S, SS460S-T2.
Benefits: Supplied in three different include speed and RPM sensing in
Features: Fastest response time in its
magnetic sensitivities to meet wide range fitness equipment, flow rate sensing in
class • No chopper stabilization
of potential applications. The SS341RT appliances and industrial processes,
• High sensitivity • Latching magnetics
and SS441R offer the highest sensitivity, displacement sensor in hospital beds and
• Sub-miniature, SOT-23 surface mount
with a typical operating point of 85 G at medical equipment and medication bin
package (SS360NT, SS360ST, SS360ST-
25°C [77°F]; the SS343RT and SS443R monitor on portable drug carts.
10K) supplied on tape and reel • Small,
offer medium sensitivity with 125 G
leaded, flat TO-92-style package
typical at 25°C [77°F]; the SS349RT SS351AT, SS451A, SS551AT.
(SS460S, SS460St-T2) • Wide operating
and SS449R offer the lowest sensitivity, Features: Omnipolar magnetics
voltage range of 3 Vdc to 24 Vdc • Built-
requiring 350 G typical to operate at • Small through-hole and surface mount
in reverse voltage • Durable design
25°C [77°F]. The SS340RT’s small size (SOT-23 and SOT-89B) packages
• RoHS-compliant material
requires less PC board space, allowing • Simple activation from either South
it to be used in smaller assemblies. Its 3 pole or North pole • Low voltage 3 V Benefits: Fastest response time in
V capability allows for use in low voltage capability • Built-in reverse polarity its class provides more efficiency in
applications, promoting energy efficiency. protection • Thermally balanced commutating brushless dc motors. No
The SS340RT Series is available on tape integrated circuit over full temperature chopper stabilization results in a clean
and reel (3000 units per reel); the SS440R range output signal. Operates from only 30
Series is available in a bulk package (1000 Gauss typical, at 25°C [77°F] and 55
Benefits: Available in three package
units per bag). Potential applications Gauss maximum over the full -40°C to
styles: SS351AT in the subminiature
include door or lid closure detection, speed 150°C [-40°F to 302°F] temperature
SOT-23 surface mount; the SS551AT
and RPM sensing in fitness equipment, range, allowing for the use of smaller,
in the SOT-89B surface mount, and
flow rate sensing, damper or valve position magnets or a wider air gap. Latching
the SS451A in the leaded, flat TO-92-
control, cylinder position monitoring, float- magnetics make these products well-
style. The SS351AT’s small size requires
based fluid level sensing and printer head suited for accurate speed sensing and
less PC board space, allowing it to be
position sensing. RPM measurement; the SS360NT is
used in smaller assemblies. Its 3 Vdc
turned ON by a North pole while the
capability allows for use in low voltage
SS345PT, SS445P. SS360ST and SS460S are turned ON by a
applications, promoting energy efficiency.
Features: Unipolar magnetics South pole. Small size allows for compact
Subminiature package size (SS351AT)
• Subminiature package size (SS345PT) design with automated component
supplied on tape and reel allows for
• Tape and reel packaging (SS345PT) placement, as well as compact PC
a compact design with automated

10 Sensing and Internet of Things

board layout. Wide operating voltage of the sensor and the circuits. Robust SS361RT, SS461R.
range allows for potential use in a wide design allows operation up to 125°C Features: Latching magnetics
range of applications. Built-in reverse [257°F]. Potential industrial/commercial • Enhanced sensitivity • Subminiature
voltage enhances the protection of applications include brushless dc motor package size (SS361RT) • Low voltage:
the sensor and the circuits. Durable commutation for white goods and other 3 V operation • Built-in reverse polarity
design allows operation up to 150°C appliances, flow rate sensing, speed and protection • Robust design: will operate
[302°F]. Potential applications include RPM sensing, tachometer and counter up to 150°C [302°F] • Through-hole and
industrial/commercial brushless dc pickup, and motor and fan control. surface-mount (SOT-23 and SOT-89)
motor commutation, flow rate sensing packages
and motor and fan control; transportation SS361CT, SS461C. Benefits: Enhanced sensitivity often
speed and RPM sensing, tachometer, Features: Enhanced sensitivity allows for the use of less expensive
counter pickup and convertible roof • Latching magnetics • Subminiature magnets. Small size requires less PC
position; medical equipment using package size with tape and reel board space, allowing it to be used in
electric motors. packaging (SS361CT) • Small, flat TO- smaller assemblies. 3 V capability allows
92-style package (SS461C) • Simple for use in low voltage applications,
SS360PT, SS460P, SS460P-T2. activation from a North pole (SS361CT) promoting energy efficiency. Available
Features: Fastest response time in its or a South pole (SS461C) • Built-in on tape and reel for most high volume
class • No chopper stabilization reverse voltage capability applications. Potential applications
• High sensitivity • Internal pull-up Hall Benefits: Enhanced sensitivity allows include speed and RPM sensing,
IC design • Latching magnetics operation from only 50 G typ. at 25°C brushless dc motor commutation,
• Subminiature package size with tape [77°F], 80 G max. at 60°C to 85°C tachometer, counter pickup, motor
and reel packaging • Small, flat TO-92- [140°F to 185°F], and 95 Gauss over and fan control, electric window lift,
style package • Wide operating voltage the full temperature range of -40°C to convertible roof position and automotive
range of 3 Vdc to 24 Vdc • Built-in reverse 125°C [-40°F to 257°F], allowing the transmission position detection, flow-rate
voltage capability • Robust design use of smaller, potentially lower-cost sensing, robotics control.
• RoHS-compliant meets directive magnets or wider air gaps. Wide operating
2002/95 voltage range of 4 Vdc to 24 Vdc for use VF360NT, VF360NT, VF460S.
Benefits: Fastest response time in its in wide range of potential applications. Features: Qualified to the AEC-Q100
class provides more efficiency in Subminiature package size (SS361CT) standard for potential use in automotive
commutating a brushless dc motor. No uses less space on the PCB than applications • Fastest response time
chopper stabilization results in a clean standard Hall-effect sensor packages in its class (1.5 μs) • Operate from 30
output signal. Operates from only 30 such as TO-92 or SOT-89, allowing for Gauss typical at 25°C [77°F] and 55
Gauss typical, at 25°C [77°F] and 55 use in smaller assemblies. Tape and Gauss maximum over the full -40°C to
Gauss maximum over the full -40°C to reel packaging (SS361CT) allows for 150°C [-40°F to 302°F] temperature
125°C [-40°F to 257°F] temperature automated component placement, range • Latching magnetics • Repeatable
range, allowing for the use of smaller, helping to reduce manufacturing costs. magnetics (no jitter) • No additional
magnets or a wider air gap. Internal pull- Small, flat TO-92-style package (SS461C) electronic noise generated by sensor
up Hall IC design simplifies installation is also available. Built-in reverse voltage • Non-chopper-stabilized design
and helps reduce component count capability enhances protection of sensor • VF360NT and VF360ST subminiature
and system cost. Latching magnetics and circuits with which it is used. Latching SOT-23 surface mount package supplied
make these products well-suited for magnetics respond to alternating North on tape and reel (3000 units per reel),
accurate speed sensing and RPM and South poles, making these products VF460S flat TO-92-style package (1000
(revolutions per minute) measurement. well-suited for accurate speed sensing units per bag) • 3 Vdc to 24 Vdc
Sub-miniature, SOT-23 surface mount and RPM measurement. Potential • Built-in reverse polarity protection
package (SS360PT) supplied on tape applications include tachometer, counter • RoHS-compliant material
and reel allows for compact design with pickup, motor and fan control, flow-rate Benefits: May be used in potential
automated component placement. sensing for appliances, robotics control, transportation applications such
Small, leaded, flat TO-92-style package and medical equipment using electric as BLDC motor commutation for
(SS460P) allows for a compact PC board motors. automotive applications (air input flap
layout. Wide operating voltage range to engine, convertible roof position,
allows for potential use in a wide range electronic parking brakes, electronic
of applications. Built-in reverse voltage window lifts and anti-pinch power
capability enhances the protection window systems, HVAC blowers,
headlights, power doors, mirrors and tail

Sensing and Internet of Things 11

gates, seat motors, steering, windshield • Wide operating voltage range Benefits: Quad Hall elements design
washers and wipers), speed and RPM • Miniature, SOT-89B plastic package minimizes effects of mechanical or
sensing (motors and fans; tachometer • Tape and reel thermal stress on output and provides
and counter pickup), and flow rate stable output. Laser-trimmed thin film
Benefits: Two separate, built-in Hall
sensing resistors provide enhanced accuracy and
sensors and associated logic circuitry
temperature compensation to reduce
provide a frequency signal for speed
SS400, SS500 Series. null and gain shift over temperature.
output and a logic level (high or low)
Features: Unipolar, bipolar, latching Positive temperature coefficient helps
signal for direction output, potentially
magnetics • Sinking output • Multiple compensate for negative temperature
replacing multiple sensors and electronic
operate/release points available coefficients of low cost magnets,
components. Temperature-compensated
• Temperature compensated magnetics providing robust design over wide
magnetics and ultra-low offset drift with
with negative slope • High output current temperature range. Rail-to-rail operation
temperature provide a stable output
capability • Small through-hole and provides more usable signal for enhanced
over a full temperature range of -40°C to
surface-mount (SOT-89) packages resolution. Potential applications include
125°C [-40°F to 257°F]. Wide operating
• Tape and reel available current sensing, motor control, position
voltage range of 3.4 Vdc to 24 Vdc
sensing, magnetic code reading, rotary
Benefits: Quad Hall element design increases application flexibility. Tested
encoding, liquid level sensing, vibration,
minimizes effects of mechanical or to moisture sensitivity similar to JEDEC
and weight sensing applications.
thermal stress on output and provides J-STD-020B, MSL Level 1, allowing use
stable output. Negative compensation in environments where humidity may be
MAGNETORESISTIVE SENSOR ICS
slope optimized to match negative a problem. Miniature plastic package
temperature coefficient of lower cost supplied on tape and reel for automated
Nanopower Series.
magnets, providing robust design over assembly, allowing potential savings
Features: High sensitivity • Nanopower
wide temperature range. Band gap in PC board space and labor cost.
• Supply voltage range of 1.65 Vdc to 5.5
regulation provides stable operation Potential applications include anti-pinch
Vdc • Omnipolar sensing • Temperature
over supply voltage range. Potential electric motor control systems for power
range of -40°C to 85°C [-40 to 185°F]
applications include speed and window and seats, magnetic encoding
• Push-pull (CMOS) output • Non-chopper
RPM sensing, brushless dc motor for electronic steering systems, motion
stabilized design • RoHS-compliant
commutation, motor and fan control, control systems for pulleys and belts,
materials • Subminiature SOT-23 package
magnetic encoding, disc speed, tape garage door openers and sliding doors
rotation, flow-rate sensing, lid and door and position and velocity detection in Benefits: High sensitivity of 7 Gauss typ.,
closing detection, and position sensing. industrial equipment. 11 Gauss max. (SM351LT); 14 G typ.,
20 Gauss max. (SM353LT) suitable for
SS41, SS51T Series. HALL-EFFECT SENSOR ICS - LINEAR a wide range of applications with large
Features: Bipolar magnetics • Sinking air gaps, small magnetic fields and low
output • High output current capability SS39ET, SS49E, SS49E-F, SS49E-L, power requirements. Average current
• Reverse polarity protection SS49E-T2, SS49E-T3, SS59ET. of 360 nA typ. (SM351LT) and 310 nA
Features: Linear magnetics • Ratiometric typ. (SM353LT) allows for use in battery
Benefits: Built-in regulator provides
sourcing output • Low-voltage operation operated equipment. Responds to
enhanced operational stability over
• Small, through-hole and surface-mount either a North or South Pole, eliminating
supply voltage range. Open-collector
packages • Available on tape and reel the need for the magnet polarity to be
digital sinking output voltage easily
identified. Push-pull output eliminates
interfaces with wide variety of electronic Benefits: Thin film resistors provide
the need for external resistors and helps
circuits. Internal circuitry prevents enhanced temperature stability and
reduce production costs. Non-chopper
sensor damage in case supply voltage accuracy. Low voltage operation for
stabilized design eliminates external
polarity is accidentally reversed. Potential energy efficiency. Potential applications
noise generated by the sensor. SOT-23
applications include brushless dc motor include current sensing, motor control,
package on tape and reel (3000 units
commutation, motor and fan control, position sensing, magnetic code reading,
per reel). Designed for potential use
magnetic encoding, and tape rotation ferrous metal detection, vibration, and
in a wide range of battery-operated
sensing. liquid level sensing.
applications including water and gas
VF526DT. meters, electricity meters, industrial
SS490/SS491B Series.
Features: Frequency signal for speed smoke detectors, exercise equipment,
Features: Linear magnetics • Ratiometric
output and logic level signal for direction security systems, hand-held computers
sourcing output • Positive temperature
output • Temperature-compensated and scanners; white goods such as
coefficient • Different package styles
magnetics and ultra-low offset drift dishwashers, microwaves, washing
machines, refrigerators and coffee
12 Sensing and Internet of Things
machines; medical equipment such as 2SS552M Series. with differential Hall sensors, making it
hospital beds, medication dispensing Features: Omnipolar magnetics easier to upgrade existing applications.
cabinets, infusion pumps; consumer • Sinking output • Low gauss operation Enhanced sensitivity, ±7 Gauss typical
electronics such as notebook computers, (25 G max.) • Operating speed of 0 kHz allows for larger air gaps (up to 2,5 mm
tablets, and cordless speakers. to over 100 kHz • Small, through-hole [0.098 in]) and higher pole density
package • Tape and reel available (up to 50-pole pairs depending on
Standard Power Series. ring diameter). Patented bridge array
Benefits: Low gauss operation (25
Features: High sensitivity: 7 Gauss typ., optimized to allow a greater air gap
G max.) extends sensing distance
11 Gauss max. (SM351RT and SM451R); between the target and the sensor with
to one inch or more, depending on
14 Gauss typ., 20 Gauss max. (SM353RT reduced loss in sensor signal or accuracy.
size. Potential polarity independent
and SM453R) • Supply voltage range Potential applications include wheel
applications include presence/
of 3 Vdc to 24 Vdc simplifies design- speed sensing and shaft speed encoding
absence detection, lid sensor for laptop
in • Omnipolar sensing • Temperature using a multipole ring magnet in a
computers, position sensing for material
range of -40°C to 85°C [-40°F to 185°F] wide variety of off road transportation,
handling equipment, and cylinder
• RoHS-compliant materials: Meets industrial and medical equipment.
position sensing in pneumatic cylinders.
Directive 2002/95/EC • SOT-23 or flat
TO-92-style package APS00B.
SS552MT.
Features: Dual bridges with outputs 45°
Benefits: Ultra-sensitive devices Features: Magnetorestive • Omnipolar
out of phase • Wide, angular range • Low
designed for manufacturers who need magnetics • Sinking output • Low gauss
resolution capability • Absolute sensing
a durable and reliable speed or position operation (25 G max.) • Operating speed
• Typical 0 MHz to 5 MHz frequency
of 0 kHz to over 100 kHz • Small, surface
sensor for large air gaps or small response • Low power requirements
mount package • Tape and reel
magnetic fields in standard power (3 • Small 8-pin SOIC package on tape and reel.
Vdc to 24 Vdc) applications. Respond Benefits: Low gauss operation (25
Benefits: Wide, angular range allows
to either North or South pole applied G max.) extends sensing distance to
measurements of ±90° without additional
one inch or more, depending on size.
in direction parallel to sensor; do not components; measurements of ±180° are
Small, surface-mount package allows
require magnet polarity to be identified, possible with external components. Dual
automated, lower-cost assembly.
simplifying installation and potentially Wheatstone bridges provide passive,
Potential polarity independent
reducing system cost. SOT-23 and flat low-noise design, enhancing system
applications include presence/
TO-92-style packages, as well as two performance. Outputs 45° out of phase
absence detection, lid sensor for laptop
magnetic sensitivities, accommodate may be used as speed and direction
computers, position sensing for material
variety of application needs. SOT-23 signals. Resolution capability of less than
handling equipment, and cylinder
surface mount package supplied on tape 0.05° enhances overall system accuracy.
position sensing in pneumatic cylinders.
Absolute sensing means no indexing is
and reel (3000 units per reel) for use in
required and the exact target position
automated pick-and-place component VF401.
is known, simplifying system design.
installation. Potential industrial Features: 2-wire digital current output
Typical 0 MHz to 5 MHz frequency
applications include high frequency flow • Wide speed capability • One pulse per
response with 190 G minimum magnetic
sensing in HVAC, water, fuel, and gas pole pair output and differential bridge
field applied makes this saturated
operation • Output pattern independent
utility meters; anti-tamper detection in mode sensor suitable for potential high
of gap between target and sensor
water, electric, and gas utility meters; speed applications. Measures only field
• Improved insensitivity to run-out, tilt
liquid level detection, motor RPM direction and is virtually unaffected by
and twist • Enhanced sensitivity
sensing, and in-cylinder position shock, vibration and magnetic-source
• Reverse polarity protection • Miniature,
sensing. Potential medical applications gap variations for stable and reliable
TO-92-style plastic package
include RPM sensing and magnetic output. Small, surface-mount package
Benefits: High performance, digital, saves room on PC board when compared
interrupt in exercise and rehabilitation
2-wire, magnetoresistive sensor in a to larger IC packages and components.
equipment, absence/presence detection
miniature, flat, TO-92-style plastic Tape and reel configuration (two sizes
in infusion pumps, position sensing of package with a current output designed available) allows use with automated
medication dispensing cabinet drawers, for sensing fine pitch ring magnets. Wide pick-and-place equipment, potentially
and incline position sensing in hospital speed capability provides application reducing assembly costs. Honeywell
beds. Potential white goods applications flexibility with true zero speed sensing APS00A instrumentation amplifier
include lid, door and drawer position and operation up to 3000 Hz. One pulse available separately for additional signal
detection, fluid flow detection, and liquid per pole pair output and differential processing. Potential applications
level detection. bridge operation allow compatibility
Sensing and Internet of Things 13
include high-accuracy angular position, package • Three terminations available Potential industrial applications include
speed and angle, and displacement Benefits: Internal magnet and Hall- power control in heavy duty vehicle
sensing in a wide variety of off road effect sensor mounted in dual tower or ac induction motors and speed and
transportation, medical and industrial side mount configuration for application position control in escalators and
equipment. flexibility. Mechanically interchangeable elevators. Potential transportation
with standard optical sensors. Medium applications include power regulation
VALUE-ADDED HALL-EFFECT level magnetic switching reduces control of hybrid electric transmissions
SENSORS stray field interference. No mechanical and engines in heavy duty vehicles,
103SR Series (Digital). contacts often eliminates product and wheel speed detection in material
Features: Unipolar, bipolar, latching wear. Environmentally sealed plastic handling, agriculture and construction
magnetics • Sinking or sourcing output package provides enhanced accuracy machines.
• Aluminum housing • Color-coded, and repeatability in environments in
jacketed cable • Adjustable mounting which dirt, dust, or stray IR light might SNDH-T Series.
Benefits: Rugged, threaded aluminum affect performance of optical solutions. Features: Advanced performance
housing. Choice of cable materials Potential applications include position and dynamic offset self calibration • Short
provides application flexibility. Potential speed sensing in fitness and information circuit and reverse voltage protection
applications include position and RPM technology, as well as in moderate
• Air gap up to 2 mm [0.08 in] • Low jitter
sensing in non-corrosive applications. electrical, chemical, and mechanical
output • Near zero speed • EMI hardened
environments.
• High frequency switching capability
103SR Series (Linear).
• Multiple connector options including
Features: Linear magnetics • Ratiometric ACTIVE SPEED SENSORS
wire harness and integral connector
sinking/sourcing output • Aluminum
versions using AMP super seal or AMP Jr.
housing • Color-coded, jacketed cable SNG-Q Series.
• Probe-style package • Integrated circuit
• Adjustable mounting Features: Wide operating temperature packaging provides output phase shift
Benefits: Rugged, threaded aluminum range: -40 ºC to 150 ºC [-40°F to 302°F] tolerancing with enhanced accuracy
housing. Choice of cable materials • Environmental sealing: Moisture
ingress protection rated to IP69K Benefits: Provides speed and direction
provides application flexibility. Potential
• Robust electrical noise immunity: information using quadrature output
applications include position and RPM
sensing in non-corrosive applications. Electrical noise radiated immunity (EMC) with signals 90 degree phase shifted
rated to 100 V/m • High frequency from each other. BiCMOS Hall-effect
SR3 Series. switching capability: 3 Hz to 20 kHz technology, using advanced digital
Features: Unipolar, bipolar magnetics • Direction information from phase- signal processing for dynamic off-
• Sinking output • Frequencies exceeding shifted dual output signals • O-ring set cancellation, designed to provide
100 kHz seal: Enables environmental sealing to enhanced air gap performance and
mounting surface • Supply voltage range: phase shift accuracy over most
Benefits: Plastic housing for position conditions. Package design includes
4.5 V to 26 V • CE certified
and RPM sensing in potential corrosive O-ring seal for pressure applications
applications such as food and beverage, Benefits: Design and manufacturing use and a fixed mounting flange. Robust,
chemical plants, and refineries. platform-based approach that enables automotive under-the-hood grade
cost-competitiveness and mechanical packaging for most environmental
SR4 Series. and electrical configurability. Provides conditions as well as EMI hardened.
Features: Magnetoresistive • Omnipolar both speed and direction information: Designed for potential applications where
magnetics • Sinking output speed from digital square wave outputs; extremely high resolution is required
Benefits: Magnetoresistive technology direction using a quadrature output with at wide frequency ranges, and large air
allows longer sensing distance at lower signals 90° phase shifted from each gaps.
gauss than Hall effect. Plastic housing other, target direction determined by
for position and RPM sensing in potential output lead/lag phase shifting. Designed
LCZ Series.
corrosive applications such as food and for applications where enhanced
Features: Stainless steel package • Low
beverage, chemical plants, and refineries. accuracy is required to detect small
cost • Omni-directional sensor to target
target features. Enhanced accuracy
orientation • Low power consumption
enabled by dual differential Hall-effect
SR16/SR17 Series. • Small size • Zero speed • Digital output
sensor IC technology. Designed for
Features: Sinking output • Non-contact • Durable, cost-effective sensing solution
wide operating temperature range,
position sensing • Compact, robust • Screw-in-style package
robust electrical noise immunity and
packages • Environmentally sealed Benefits: Available in several diameters
environmental sealing capability.
and lengths for application flexibility.
14 Sensing and Internet of Things
Stainless steel package simple to install/ frequency proportional to gear wheel configurations • Customized versions
adjust and does not require rotational speed. Potential applications include for potential unique speed sensing
orientation. Potential applications tachometers/counters, speed of gears applications
include harsh environment rotary and shafts in transmissions, hydraulic Benefits: All series: Direct conversion of
applications such as pumps, rollers, motors, pumps, and gear boxes flow actuator speed to output frequency. VRS
mixers, fan speed measurement, meters/turbines, and engine RPM. General Purpose Series, VRS Hazardous
transmission, spindles, gear reducer Location Series: Simple, rugged devices
RPM, synchronization, compressor DIGITAL MAGNETIC SPEED do not require external voltage source
speed, and dyno testing, plus industrial SENSORS for operation. VRS High Output Series:
process control and factory automation. Performs best at low to medium speeds
584XX Series. with medium to high impedance loads.
ZH10 Series. Features: Senses moving ferrous metal Sealed front-end versions available for
Features: Aluminum package • Low • Output signal of integrated circuit use where sensor is exposed to fluids,
cost • Omni-directional sensor to target allows for direct use in digital equipment lubricants, or adverse environmental
orientation • Low power consumption • Eliminates the need for interface conditions. VRS High Resolution Series:
• Small size • Zero speed • Digital output circuitry, often reducing installation and Proper sensor alignment is required. VRS
• Durable, cost-effective sensing solution maintenance costs • Enhanced stability High Temperature Series: Sealed front-
• Screw-in-style package due to precisely-matched components end versions for potential applications
• Extremely precise relationship between where sensor is exposed to fluids,
Benefits: Aluminum package simple
the physical position of any sensed lubricants, or adverse environmental
to install/adjust and does not require
object and the electrical signal produced conditions.
rotational orientation. Potential
provides improved accuracy to timing
applications include harsh environment Potential applications: VRS General
and positioning applications • Enhanced
rotary applications such as pumps, Purpose Series: Engine and motor
sensitivity
rollers, mixers, fan speed measurement, RPM, process, flow, wheel-slip, and
transmission, spindles, gear reducer Benefits: Enhanced resistance to gear speed measurement with medium
RPM, synchronization, compressor water, oil, shock and vibration damage to high speeds or in electrically noisy
speed, and dyno testing, plus industrial extends the product life and operating environments with relatively small air
process control and factory automation. reliability. A variety of supply voltages gaps. VRS Hazardous Location Series:
and pre-leaded or connector versions Engine and motor RPM, process, flow,
SNDH-H Series. allow flexibility of use in the application. wheel-slip, and gear speed measurement
Features: Hall-effect magnetic sensing Allows for the reduction in noise, where explosion-proof or intrinsically
technology • Digital current sinking often vital in potential positioning and safe sensors are required. VRS High
output (open collector) • Advanced synchronization applications. Standard Output Series: Engine and motor RPM,
performance dynamic offset self- thread sizes enhance compatibility and process, flow, wheel-slip, and gear
calibration • Air gap up to 2,5 mm interchangeability with other standard speed measurement where higher
[0.098 in] • Zero speed versions • High types of speed sensors. Potential output voltages are needed. VRS High
frequency switching capability (0 Hz applications include computing, high- Resolution Series: Engine and motor
to 15 kHz) • -40 ºC to 150 ºC [-40°F to speed counting, positioning, tachometry, RPM, process, flow, wheel-slip, and gear
302°F] operating temperature capability synchronization, routing, flow metering, speed measurement where precise timing
• Multiple connector options • O-ring machine control, engine, motor, or pump pulse is required, and/or fine pitch gears
seal RPM sensing, over/under speed sensing, are used. VRS High Temperature Series:
and wheel speed detection. Engine and motor RPM, process, flow,
Benefits: Use a magnetically biased
Hall-effect integrated circuit to accurately wheel-slip, and gear speed measurement
PASSIVE SPEED SENSORS where sensor is exposed to temperatures
sense movement of ferrous metal targets.
(Variable Resistance Sensors - VRS) up to 260°C [450°F]. VRS Power Output
The uniquely designed IC (integrated
circuit) and a permanent magnet are General Purpose Series, Hazardous Series: Driving low resistance loads at
sealed in rugged, probe-type packages. Location Series, High Output large air gaps in engine and motor RPM,
The flux density of the permanent magnet Series, High Resolution Series, High process, flow, wheel-slip, and gear speed
alters when approached by ferrous metal Temperature Series, Power Output measurement where larger actuators may
and is detected by the Hall ICs. If the Series. be used.
sensor is positioned at the circumference Features: Self-powered operation
of a revolving gear wheel, for example, • Simple installation • No moving parts
it detects the teeth and tooth spaces, • Operates over wide speed range
supplying a digital pulse output with • Adaptable to wide variety of
Sensing and Internet of Things 15
 Warranty. Honeywell warrants goods of
its manufacture as being free of defective
materials and faulty workmanship
during the applicable warranty period.
Honeywell’s standard product warranty
applies unless agreed to otherwise by
Honeywell in writing; please refer to your
order acknowledgement or consult your
local sales office for specific warranty
details. If warranted goods are returned
to Honeywell during the period of
coverage, Honeywell will repair or replace,
at its option, without charge those items
that Honeywell, in its sole discretion,
finds defective. The foregoing is buyer’s
sole remedy and is in lieu of all other
warranties, expressed or implied,
including those of merchantability
and fitness for a particular purpose.
In no event shall Honeywell be liable
for consequential, special, or indirect
damages.

While Honeywell may provide application

assistance personally, through our
literature and the Honeywell web site, it
is buyer’s sole responsibility to determine
the suitability of the product in the
application.

Specifications may change without

notice. The information we supply is
believed to be accurate and reliable as of
this writing. However, Honeywell assumes
no responsibility for its use.

To learn more about Honeywell Sensing

and Internet of Things’ products, call
+1-815-235-6847 or 1-800-537-6945,
visit sensing.honeywell.com, or e-mail
inquiries to info.sc@honeywell.com

Honeywell Sensing and Internet of Things

9680 Old Bailes Road
Fort Mill, SC 29707
005894-21-EN | 21 | 05/17  
honeywell.com Copyright © 2017 Honeywell International Inc. All rights reserved.