Document ID: 2285881 Page 1 of 6

2016 Chevrolet SS | | Engine/Propulsion | Engine Mechanical - 6.2L LS3 |

SS Sedan Service Manual 8735925 Specifications |
Document ID: 2285881

Fastener Specifications (LS3)

Fastener Tightening Specifications

Specification

Application Metric English

A/C Compressor Bracket to Engine Block Retaining

58 Y 43 lb ft
Bolt

A/C Compressor to A/C Compressor Bracket Retaining

22 Y 16 lb ft
Bolt

A/C Drive Belt Tensioner Pulley to A/C Drive Belt

50 Y 37 lb ft
Tensioner Retaining Bolt

A/C Drive Belt Tensioner to A/C Compressor Bracket

22 Y 16 lb ft
Retaining Bolt

A/C Suction/Discharge Pipe Pad to A/C Compressor

16 Y 12 lb ft
Retaining Bolt

Air Cleaner Inlet Duct to Throttle Body Hose Clamp 7Y 62 lb in

Automatic Transmission Cooler Pipe Clamp to A/C

22 Y 16 lb ft
Compressor Bracket Retaining Bolt

Camshaft Position (CMP) Sensor to Engine Front Cover

9Y 80 lb in
Retaining Bolt

Camshaft Retainer to Engine Block Retaining Bolt 25 Y 18 lb ft

Camshaft Sprocket to Camshaft Retaining Bolt (L98, LS3, L76, L77)

• First Pass 75 Y 55 lb ft

• Second Pass + 50 Degrees

Close Out Cover to Engine Block Retaining Bolt Left 10 Y 89lb in

Close Out Cover to Engine Block Retaining Bolt Right 10 Y 89lb in

Clutch Pressure Plate to Flywheel Retaining Bolt

15 Y 11 lb ft
• First Pass © 2017 General Motors. All rights reserved.

https://gsi.ext.gm.com/gsi/showDoc.do?laborOpCode=&docSyskey=2285881&cellId=144247&pubObjSyskey=9595256&from=sm&p... 2/16/2017
Document ID: 2285881 Page 2 of 6

Specification

Application Metric English

• Second Pass 35 Y 26 lb ft

• Third Pass 55 Y 41 lb ft

• Final Pass 70 Y 52 lb ft

Connecting Bearing Cap to Connecting Rod Retaining Bolt (L98, LS3, L76, L77)

• First Pass 20 Y 15 lb ft

• Second Pass + 85 Degrees

Coolant Air Bleed Pipe and Hole Cover to Cylinder

12 Y 106 lb in
Head Retaining Bolt

Coolant Temperature Sensor 20 Y 15 lb ft

Crankshaft Balancer to Crankshaft Retaining Bolt

• First Pass 150 Y 110 lb ft

• Second Pass Loosen 360 Degrees

• Third Pass 80 Y 59 lb ft

• Fourth Pass (Bolt with flanged head.) + 125 Degrees

• Fourth Pass (Bolt with retained rotating washer.) + 200 Degrees

Crankshaft Bearing Cap to Engine Block Side Retaining

25 Y 18 lb ft
Bolt (M8)

Crankshaft Bearing Cap to Engine Block Retaining Bolt (M10)

20 Y 15 lb ft

https://gsi.ext.gm.com/gsi/showDoc.do?laborOpCode=&docSyskey=2285881&cellId=144247&pubObjSyskey=9595256&from=sm&p... 2/16/2017
Document ID: 2285881 Page 3 of 6

Specification

Application Metric English

• First Pass in Sequence

• Second Pass in Sequence + 80 Degrees

Crankshaft Bearing to Engine Block Retaining Stud (M10)

• First Pass in Sequence 20 Y 15 lb ft

• Second Pass in Sequence + 51 Degrees

Crankshaft Oil Deflector to Oil Pan Retaining Nut 10 Y 89 lb in

Crankshaft Position (CKP) Sensor to Engine Block

25 Y 18 lb ft
Retaining Bolt

Crankshaft Rear Oil Seal Housing to Engine Block

30 Y 22 lb ft
Retaining Bolt

Cylinder Head Coolant Plug to Cylinder Head 20 Y 15 lb ft

Cylinder Head to Engine Block Retaining Bolt (M8) - in

30 Y 22 lb ft
sequence

Cylinder Head to Engine Block Retaining Bolt (M11)

• First Pass in sequence 30 Y 22 lb ft

• Second Pass in sequence + 90 Degrees

• Third Pass in sequence + 70 Degrees

Engine Block Coolant Drain Hole Plug 60 Y 44 lb ft

Engine Block Coolant Heater (LS3) 50 Y 37 lb ft

Engine Block Oil Gallery Plug 60 Y 44 lb ft

Engine Mount Bracket to Engine Block Retaining Bolt 58 Y 43 lb ft

https://gsi.ext.gm.com/gsi/showDoc.do?laborOpCode=&docSyskey=2285881&cellId=144247&pubObjSyskey=9595256&from=sm&p... 2/16/2017
Document ID: 2285881 Page 4 of 6

Specification

Application Metric English

Evaporative Emission (EVAP) Canister Purge Solenoid 20 Y 15 lb ft

Valve Bracket to Cylinder Head Retaining Bolt

Exhaust Manifold to Cylinder Head Retaining Bolt

• First Pass 15 Y 11 lb ft

• Second Pass 20 Y 15 lb ft

Exhaust Manifold Heat Shield to Exhaust Manifold

10 Y 89 lb in
Retaining Bolt

Flywheel to Crankshaft Retaining Bolt (L98, LS3, L76, L77)

• First Pass 20 Y 15 lb ft

• Second Pass 50 Y 37 lb ft

• Third Pass 100 Y 74 lb ft

Front Cover to Engine Block Retaining Bolt 25 Y 18 lb ft

Fuel Injection Fuel Rail to Inlet Manifold Retaining Bolt 10 Y 89 lb in

Ignition Coil Bracket to Valve Rocker Arm Cover Stud 12 Y 106 lb in

Ignition Coil to Ignition Coil Bracket Retaining Bolt 10 Y 89 lb in

Intake Manifold to Cylinder Head Retaining Bolt

• First Pass in sequence 5Y 44 lb in

• Second Pass in sequence 10 Y 89 lb in

J41798 M10 Bolt 50 Y 37 lb ft

J41798 M8 Bolt 25 Y 18 lb ft

Knock Sensor to Engine Block Retaining Bolt 25 Y 18 lb ft

https://gsi.ext.gm.com/gsi/showDoc.do?laborOpCode=&docSyskey=2285881&cellId=144247&pubObjSyskey=9595256&from=sm&p... 2/16/2017
Document ID: 2285881 Page 5 of 6

Specification

Application Metric English

3/4 to 1 full turn after gasket makes

Oil Filter contact with the sealing surface on the
filter mounting flange

Oil Filter Adapter 55 Y 41 lb ft

Oil Level Indicator Tube to Cylinder Head Retaining

25 Y 18 lb ft
Bolt (L98, LS3, L76, L77)

Oil Level Sensor 20 Y 15 lb ft

Oil Pan Baffle to Oil Pan Retaining Bolt 12 Y 106 lb in

Oil Pan Cover to Oil Pan Retaining Bolt 12 Y 106 lb in

Oil Pan Drain Plug 25 Y 18 lb ft

Oil Pan to Rear Oil Seal Housing Retaining Bolt (M6) 12 Y 106 lb in

Oil Pan to Engine Block Retaining Bolt (M8) 25 Y 18 lb ft

Oil Pan to Front Cover Retaining Bolt (M8) 25 Y 18 lb ft

Oil Pressure Sensor 35 Y 26 lb ft

Oil Pump Cover to Oil Pump Retaining Bolt 12 Y 106 lb in

Oil Pressure Relief Valve Plug to Oil Pump 14 Y 124 lb in

Oil Pump Screen to Crankshaft Oil Deflector Retaining

10 Y 89 lb in
Nut

Oil Pump Screen to Oil Pump Retaining Bolt 9Y 80 lb in

Oil Pump to Engine Block Retaining Bolt 25 Y 18 lb ft

Spark Plug

• Fit New Spark Plug 20 Y 15 lb ft

• Refit Existing Spark Plug 15 Y 11 lb ft

Throttle Body to Intake Manifold Retaining Bolt 10 Y 89 lb in

https://gsi.ext.gm.com/gsi/showDoc.do?laborOpCode=&docSyskey=2285881&cellId=144247&pubObjSyskey=9595256&from=sm&p... 2/16/2017
Document ID: 2285881 Page 6 of 6

Specification

Application Metric English

Timing Chain Tensioner to Engine Block Retaining Bolt 25 Y 18 lb ft

Valley Cover to Engine Block Retaining Bolt 25 Y 18 lb ft

Valve Lifter Guide to Engine Block Retaining Bolt 12 Y 106 lb in

Valve Rocker Arm Cover to Cylinder Head Retaining

12 Y 106 lb in
Bolt

Valve Rocker Arm to Cylinder Head Retaining Bolt 30 Y 22 lb ft

Thermostat Housing to Water Pump Retaining Bolt 15 Y 11 lb ft

Water Pump to Engine Block Retaining Bolt

• First Pass 15 Y 11 lb ft

• Second Pass 30 Y 22 lb ft

https://gsi.ext.gm.com/gsi/showDoc.do?laborOpCode=&docSyskey=2285881&cellId=144247&pubObjSyskey=9595256&from=sm&p... 2/16/2017