What Is Wellhead Control Panels (WHCP) - Distributed Control Systems - DCS
What Is Wellhead Control Panels (WHCP) - Distributed Control Systems - DCS
Wellhead Control Panels (WHCPs) are also known as Shutdown Panels (SDP) Emergency Shutdown Systems (ESD) Hydraulic
Jan 2018
Safety Shutdown System (HSSS).
1/6
These are fail safe shutdown systems which have pneumatic/hydraulic/electric components; WHCPs can also Jan
be integrated
2018 with
PLC/ RTU/ SCADA. WHCPs are standalone control systems as well as an interface between the plant control and the wellhead
safety system.
WHCPs are used for monitoring, controlling (Remote/Local) and safe shutdown of Subsurface Controlled Safety Valves (SCSSV),
Surface Safety Valves (SSV), and other wellhead safety valves (Choke, ESD, HIPPS) in oil & gas production fields to ensure safe
operation of unattended wells/platforms.
WHCPs may have multiple applications, which include, but are not limited to
Also Read -
The wellhead control panel (WHCP) is a hydraulic system that utilizes a hydraulic power pack (pump and accumulators) and a
wellhead control module to perform its task.
The output of WHCP is high pressure hydraulic supply and medium hydraulic supply to operate choke and safety valves. The
wellhead control panel is also the interface between the plant control and the well safety system.
A typical wellhead control panel contains a system of valves and regulators, situated topside at the power source, which may be
operated manually or by remote control to direct pressurized mineral oil or water-glycol to final control elements at the
wellhead/Christmas tree.
https://instrumentationforum.com/t/what-is-wellhead-control-panels-whcp/2378 1/4
1/26/2020 What is Wellhead Control Panels (WHCP)? - Distributed Control Systems - DCS - Instrumentation Forum
A typical arrangement includes - reservoir, pumps, accumulators, solenoids, valves, pressure regulators, switches, motor control,
transmitters and junction boxes. Each well is typically equipped with:
• Surface Controlled Subsurface Safety Valves (SCSSV) or Down Hole Valves (DHV)
(In most applications, SCSSV is an on-o valve with hydraulic actuators)
1- Hydraulic Panel
2- Control Panel
Your are asking about Control Panels, So following are important constituents :
https://instrumentationforum.com/t/what-is-wellhead-control-panels-whcp/2378 2/4
1/26/2020 What is Wellhead Control Panels (WHCP)? - Distributed Control Systems - DCS - Instrumentation Forum
A high-integrity pressure protection system (HIPPS) is a type of safety instrumented system (SIS) designed to prevent over-
pressurization of a plant, such as a chemical plant or oil refinery.
The HIPPS will shut off the source of the high pressure before the design pressure of the system is exceeded, thus preventing loss
of containment through rupture (explosion) of a line or vessel.
Therefore, a HIPPS is considered as a barrier between a high-pressure and a low-pressure section of an installation.
Pressure control & Wellhead Control electrical What is Wellhead or What is Split Range Solenoid Valves
Regulators - Gas & Panel Functions maintenance Xmas Tree? Control? used in Safety
Fluid test equipment Instrumented
Systems
https://instrumentationforum.com/t/what-is-wellhead-control-panels-whcp/2378 4/4