Scribd
Upload
189 views3 pages

Modulo DSU232

This chapter provides technical data and wiring diagrams for the QML logger and accessory modules. It includes wiring instructions for the RS-232 module, which can provide either a double serial channel without handshaking or a single channel with handshaking, as well as an optional SDI-12 interface. Diagrams are shown for the RS-232 wiring and for connecting sensors in a T-configuration in dual port mode. The location of the SDI-12 jumper on the DSU232-C module and its settings are also detailed.

Uploaded by

Emily Vargas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
189 views3 pages

Modulo DSU232

This chapter provides technical data and wiring diagrams for the QML logger and accessory modules. It includes wiring instructions for the RS-232 module, which can provide either a double serial channel without handshaking or a single channel with handshaking, as well as an optional SDI-12 interface. Diagrams are shown for the RS-232 wiring and for connecting sensors in a T-configuration in dual port mode. The location of the SDI-12 jumper on the DSU232-C module and its settings are also detailed.

Uploaded by

Emily Vargas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Chapter 8 ____________________________________________________________ Technical Data

CHAPTER 8
TECHNICAL DATA

This chapter provides the technical data of the QML logger and
accessory modules.

Wiring Instructions

NOTE All wiring diagrams in this manual are examples only. Refer to the
appropriate delivery documents for the actual wiring.

Do not change the wiring between the connectors and the logger pins.
For special deliveries or with some sensors, a separate wiring diagram
is supplied in order to help you connect the sensor wires to correct
connectors.

VAISALA ______________________________________________________________________ 195


User's Guide ______________________________________________________________________

RS-232 Module
The unisolated RS-232 module provides either a double serial channel
without handshaking or a single RS-232 with handshaking. In addition,
an optional SDI-12 interface is available.

0903-022
Figure 103 RS-232 Wiring Diagram

0401-254
Figure 104 Suggested T-connection in Dual Port Mode

For the SDI-12 wiring with the later version, see Figure 110 on page
201. The SDI-12 data pin is the same as in the dual RS-485 module, and
the same wiring method can be used as in Figure 110 on page 201.

See Figure 110 on page 201 and Table 41 on page 197 for the SDI-12
jumper of DSU232-C.

196 _________________________________________________________________ M210784EN-D


Chapter 8 ____________________________________________________________ Technical Data

0903-023
Figure 105 SDI-12 Jumper of DSU232-C

Table 41 DSU232-C Jumper Settings


Jumper Connected Function
Pins
X3 1-2 Pin 5 is GND (default, compatible with the old
DSU232)
2-3 SDI-12 connected to pin 5

VAISALA ______________________________________________________________________ 197

You might also like