Product specification
Climate chamber
ICH260
Unparalleled homogeneity of temperature
and humidity! For stability testing
according to ICH - WHO - EMA - ASEAN
- GMP - GLP – GCCP.
On this page, you can find all the essential technical data on the Memmert climate chamber ICH. Our customer
relations team will be pleased to help if you want further information. If you should require a customised special
solution, please contact our technical specialists at myAtmoSAFE@memmert.com.
Page 1/3 Memmert GmbH + Co. KG | Tel. +49 (0) 9122/925-0 | Fax +49 (0) 9122/145 85 | E-Mail info@memmert.com
Memmert Climate chamber ICH260 - en
Control of standard components
ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays
Temperature 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the
same temperature value
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Humidity humidity supply with distilled water from external tank by self-priming pump
Humidity active humidifying and de-humidifying adjustable from 10-80 % rh with digital display of relative
humidity - resolution of display 0.1 %, setting accuracy 0.5 %
Humidity humidity supply with distilled water from external tank by self-priming pump
Humidity humidification by hot steam generator
Temperature
from -10°C up to +60°C without humidity
from +10°C up to +60°C with humidity
resolution of display for
setpoint and actual 0.1°C
temperature values
Control technology
adjustable parameters temperature (Celsius or Fahrenheit), fan speed, relative humidity, programme time, time zones,
summertime/wintertime
Calibration three freely selectable values each, temperature/humidity/CO2
Function SetpointWAIT the process time does not start until the set temperature is reached
Language setting German/English/Spanish/French
Ventilation
Fan forced air circulation in working chamber adjustable from 10 to 100 % in 10 % steps
Communication
Programming AtmoCONTROL software on a USB stick for programming, managing and transferring programmes
via Ethernet interface or USB port
Documentation programme stored in case of power failure
Safety
Autodiagnostic system integral fault diagnostics for temperature and humidity control
Alarm audible and visual
Temperature control over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter
TWB, protection class 2, selectable on display
AutoSAFETY additionally integrated over- and undertemperature protection "ASF", automatically following the
setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is
switched off in case of overtemperature, compressor in case of undertemperature
Temperature control mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating
approx. 10°C above nominal temperature
Page 2/3 Memmert GmbH + Co. KG | Tel. +49 (0) 9122/925-0 | Fax +49 (0) 9122/145 85 | E-Mail info@memmert.com
Memmert Climate chamber ICH260 - en
Heating concept
no drying-up of the load caused by the cooling device due to separation of thermal jacket from interior
energy-saving use of CFC-free cooling/heating system (refrigerant R134a)
highly efficient automatic defrosting system
air jacket heating system for gentle all-around heating
Standard equipment
Door fully insulated stainless steel doors with2-point locking (compression door lock)
Door inner glass doors
Housing rear zinc-plated steel
Installation on lockable castors
Internals 2 stainless steel grids
Stainless steel interior
w(A) x h(B) x d(C): 640 x 800 x 500 mm
Volume 256 l
Max. loading of chamber: 200 kg
Textured stainless steel casing
w(D) x h(E) x d(F): 824 x 1552 x 734 mm
Electrical data
230 V, 50/60 Hz / approx. 1350 W
115 V, 50/60 Hz / approx. 1350 W
Packing/shipping data
the appliances must be transported upright
Customs tariff number 8419 8998
Country of origin Federal Republic of Germany
WEEE-Reg.-No. DE 66812464
Dimensions approx incl. carton B x H x T: 930 x 1760 x 930 mm
Net weight approx. 160 kg
Gross weight carton approx. 217 kg
Standard units are safety-approved and bear the test marks
Page 3/3 Memmert GmbH + Co. KG | Tel. +49 (0) 9122/925-0 | Fax +49 (0) 9122/145 85 | E-Mail info@memmert.com
